|
Revision tags: release/14.0.0 |
|
| #
685dc743 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c pattern
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0 |
|
| #
b3512b30 |
| 01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
rtwn: clean up empty lines in .c and .h files
|
|
Revision tags: release/11.4.0, release/12.1.0, release/11.3.0 |
|
| #
387c3f14 |
| 02-Jan-2019 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn_pci: fix excessive packet loss on Tx with RTL8188EE.
Use proper flags for bus_dmamap_sync() in Tx path.
Tested with: RTL8188EE, STA mode
MFC after: 4 days
|
|
Revision tags: release/12.0.0, release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
67bc8c8b |
| 19-Nov-2016 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r308491 through r308841.
|
| #
a14f9888 |
| 12-Nov-2016 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn: enable 11n support for RTL8188CE.
- Increase Rx buffer size from MCLBYTES to MJUMPAGESIZE.
- Provide an additional defragmentation routine for frames larger
than MCLBYTES; that is required by
rtwn: enable 11n support for RTL8188CE.
- Increase Rx buffer size from MCLBYTES to MJUMPAGESIZE.
- Provide an additional defragmentation routine for frames larger
than MCLBYTES; that is required by A-MSDU / Atheros Fast-Frames
support to work with current Tx path implementation.
Enabled features list for RTL8188CE:
- Atheros Fast-Frames;
- A-MPDU (Tx / Rx);
- A-MSDU (Tx / Rx; 4k only);
- Short Guard Interval.
Tested with:
- RTL8188CE (STA+AP) + RTL8821AU (STA).
- RTL8188CE (STA) + RTL8188CUS (AP).
Relnotes: yes
show more ...
|
| #
2828dafc |
| 10-Nov-2016 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r308227 through r308490.
|
| #
d067ef0f |
| 07-Nov-2016 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn: add HOSTAP / IBSS mode support for RTL8188CE.
NOTE: some multi-vap configurations (e.g., STA+IBSS) are not stable;
that will be fixed later.
Tested with:
- RTL8188CE, STA + AP mode;
- RTL81
rtwn: add HOSTAP / IBSS mode support for RTL8188CE.
NOTE: some multi-vap configurations (e.g., STA+IBSS) are not stable;
that will be fixed later.
Tested with:
- RTL8188CE, STA + AP mode;
- RTL8188CE, IBSS mode;
- RTL8188CUS, IBSS mode;
- RTL8188EU, IBSS mode.
Relnotes: yes
show more ...
|
| #
5763f796 |
| 21-Oct-2016 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r307383 through r307735.
|
| #
7453645f |
| 17-Oct-2016 |
Andriy Voskoboinyk <avos@FreeBSD.org> |
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- m
rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
show more ...
|