Merging ^/head r278298 through r278350.

Add a new device control utility for new-bus devices called devctl. This
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and

Add a new device control utility for new-bus devices called devctl. This
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.

Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes

show more ...

Reintegrate head: r274132-r277384

Sponsored by: The FreeBSD Foundation

Reintegrate head revisions r273096-r277147

Sponsored by: The FreeBSD Foundation

MFhead @ r276594

Merge ^/head r274961 through r276301.

- Make PCI_QUIRK_MSI_INTX_BUG work by using the ID of the actual PCI device
for the lookup.
- For devices affected by PCI_QUIRK_MSI_INTX_BUG, ensure PCIM_CMD_INTxDIS
is cleared when using MSI/MSI

- Make PCI_QUIRK_MSI_INTX_BUG work by using the ID of the actual PCI device
for the lookup.
- For devices affected by PCI_QUIRK_MSI_INTX_BUG, ensure PCIM_CMD_INTxDIS
is cleared when using MSI/MSI-X.
- Employ PCI_QUIRK_MSI_INTX_BUG for BCM5714(S)/BCM5715(S)/BCM5780(S) rather
than clearing PCIM_CMD_INTxDIS unconditionally for all devices in bge(4).

MFC after: 3 days

show more ...

Sync to HEAD@r274766

Revert r274635 as it's completely wrong.
The parent of a pci dev device is a pciX device which do not
implement the PCIB_POWER_FOR_SLEEP method from pcib_if.m.

Merge from head@274682

Use the correct device as the power_for_sleep() method
always pass request up to parent bridge.

Reviewed by: jhb
MFC after: 1 week
xMFC: r274386,r274397

Use the correct device (child) when asking the bus layer about which power
state said device should go into.

This was a snafu introduced in the ACPI/PCI awareness separation.

When putting a device

Use the correct device (child) when asking the bus layer about which power
state said device should go into.

This was a snafu introduced in the ACPI/PCI awareness separation.

When putting a device into a power state, the bus (and thus firmware,
eg ACPI) should be asked before hand to check whether the device
can indeed go into that power state.

There's a set of nodes in ACPI under each device - the _SxD nodes - which
state which ACPI power state to put the device into when the system is
going into power save state 'x'. So when going into S3, the existence
of an _S3D node would override whatever the system was trying to do.

By default the PCI code wants to put devices into D3 before suspending.

I have a laptop here (Asus Zenbook - check the PR) whose EHCI controller
really wants to be in D2 during suspend, not D3. So if we put it into
D3 and then try to enter S3, everything hangs. The device itself
can go into D3 - it just can't be there when the call to ACPI to enter
S3 occurs. The PCI patch fixes this.

jkim@ noticed that the same is needed for the ACPI child device
enumeration.

Thankyou to Matt Dillon (the programmer, not the actor) for buying me
this particular laptop so I could debug the issues with the Atheros
AR9485 that is in it. It's his fault that I ended up with this
laptop and was sufficiently annoyed by the lack of USB suspend
to go down this rabbit hole.

Tested:

* Thinkpad T400
* Thinkpad X230
* Thinkpad T42
* Thinkpad T60
* Asus Zenbook (see PR)
* Asus EEEPC 701
* Asus EEEPC 1001PX

TODO:

* Figure out what we should do about devices we unload drivers for
that want to be in a specific state when entering S3 / S4 -
the "put devices into D3 if they're not bound to a driver" option
may also mess with things.

PR: kern/194884
Reviewed by: jhb, jkim
MFC after: 1 week
Relnotes: yes
Sponsored by: Matt Dillon <dillon@apollo.backplane.com> (hardware)

show more ...

Sync to HEAD@r274095.

IFC @r273206

Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc sy

Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.

Submitted by: kmacy
Tested by: make universe

show more ...

Reintegrate head@r273095

Sponsored by: The FreeBSD Foundation

Merge HEAD@r272944.

IFC @r272887

Sync to HEAD@r272825.

Add a bus method to fetch the VM domain for the given device/bus.

* Add a bus_if.m method - get_domain() - returning the VM domain or
ENOENT if the device isn't in a VM domain;
* Add bus methods t

Add a bus method to fetch the VM domain for the given device/bus.

* Add a bus_if.m method - get_domain() - returning the VM domain or
ENOENT if the device isn't in a VM domain;
* Add bus methods to print out the domain of the device if appropriate;
* Add code in srat.c to save the PXM -> VM domain mapping that's done and
expose a function to translate VM domain -> PXM;
* Add ACPI and ACPI PCI methods to check if the bus has a _PXM attribute
and if so map it to the VM domain;
* (.. yes, this works recursively.)
* Have the pci bus glue print out the device VM domain if present.

Note: this is just the plumbing to start enumerating information -
it doesn't at all modify behaviour.

Differential Revision: D906
Reviewed by: jhb
Sponsored by: Norse Corp

show more ...

Oops, fix typo made in r272729.

Add new quirk PCI_QUIRK_MSI_INTX_BUG to pci(4).
QAC AR816x/E2200 controller has a silicon bug that MSI interrupt
does not assert if PCIM_CMD_INTxDIS bit of command register is set.

Reviewed by: jhb

Sync to HEAD@r272516.

IFC @r272185

Stage one of multipass suspend/resume

Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.

Reviewers: jhb

Re

Stage one of multipass suspend/resume

Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.

Reviewers: jhb

Reviewed By: jhb

Differential Revision: https://reviews.freebsd.org/D590

show more ...