| #
70547544 |
| 12-Dec-2023 |
Ram Kishore Vegesna <ram@FreeBSD.org> |
ocs_fc: IO timeout handling and error reporting fix.
Hardware timeout uses a 8-bit timeout value and expects the timeout to
be less than 255 seconds. Added software timer implemetation to timeout
an
ocs_fc: IO timeout handling and error reporting fix.
Hardware timeout uses a 8-bit timeout value and expects the timeout to
be less than 255 seconds. Added software timer implemetation to timeout
and abort the IOs with timeout more than 255 seconds.
Fix the timeout problem by dividing CAM timeouts by 1000 as hardware
expects timeout value in seconds. Before this change, CAM timeouts in
milliseconds were getting truncated to 8 bits and converted to seconds.
So the actual timeout used when going down to the card would depend on
the bottom 8 bits of the timeout used.
Add the mapping of ocs_fc error status to CAM status.
Reported by: ken
Reviewed by: ken
Tested by: ken, ram
Approved by: ken
MFC after: 1 week
show more ...
|
|
Revision tags: release/14.0.0 |
|
| #
95ee2897 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
|
Revision tags: release/13.2.0 |
|
| #
fb4a8616 |
| 07-Dec-2022 |
John Baldwin <jhb@FreeBSD.org> |
ocs: Fix mismatch in array bounds.
Reported by: GCC -Warray-parameter
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D37545
|
|
Revision tags: release/12.4.0, release/13.1.0 |
|
| #
965e2154 |
| 03-Mar-2022 |
Ram Kishore Vegesna <ram@FreeBSD.org> |
ocs_fc: Support persistent topology feature
Summary: Enable persistent topology across power cycles/firmware resets.
Reviewed by: mav
MFC after: 3 days
Differential Revision: https://reviews.free
ocs_fc: Support persistent topology feature
Summary: Enable persistent topology across power cycles/firmware resets.
Reviewed by: mav
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34425
show more ...
|
|
Revision tags: release/12.3.0 |
|
| #
3bf42363 |
| 23-Sep-2021 |
Ram Kishore Vegesna <ram@FreeBSD.org> |
ocs_fc: Emulex Gen 7 HBA support.
Emulex Gen7 adapter support in ocs_fc driver.
Reviewed by: mav, ken
|
|
Revision tags: release/13.0.0, release/12.2.0 |
|
| #
98d835ae |
| 02-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
ocs_fc: clean up empty lines in .c and .h files
|
|
Revision tags: release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
ef270ab1 |
| 30-Mar-2018 |
Kenneth D. Merry <ken@FreeBSD.org> |
Bring in the Broadcom/Emulex Fibre Channel driver, ocs_fc(4).
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus A
Bring in the Broadcom/Emulex Fibre Channel driver, ocs_fc(4).
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
show more ...
|