Mechanically convert mlx4(4) to IfAPI

Reviewed by: hselasky, zlei
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37823

ibcore: Kernel space update based on Linux 5.7-rc1.

Overview:

This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.

This patch is based on about f

ibcore: Kernel space update based on Linux 5.7-rc1.

Overview:

This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.

This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.

- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.

- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.

- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.

Dependencies:

- The mlx4ib driver code has been updated with the minimum changes
needed.

- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.

Compatibility:

- All user-space facing APIs are backwards compatible after this
change.

- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.

- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.

Differences from Linux:

- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.

Security:

- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.

Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429

MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking

show more ...

mlx4: replace LinuxKPI macros with ifnet functions

The LinuxKPI net_device actually is an ifnet; in order to further
clean that up so we can extend "net_device" replace the few macros
inline in mlx

mlx4: replace LinuxKPI macros with ifnet functions

The LinuxKPI net_device actually is an ifnet; in order to further
clean that up so we can extend "net_device" replace the few macros
inline in mlx4.

Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D30476

show more ...

Add support for prio-tagged traffic for RDMA in ibcore.

When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and

Add support for prio-tagged traffic for RDMA in ibcore.

When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.

The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.

Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.

The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().

MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Optimize ibcore RoCE address handle creation from user-space.

Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3

Optimize ibcore RoCE address handle creation from user-space.

Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.

It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.

This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.

This commit combines the following Linux upstream commits:

IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah

MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

RoCE/infiniband upgrade to Linux v4.9 for kernel and userspace.

This commit merges projects/bsd_rdma_4_9 to head.

List of kernel sources used:
============================

1) kernel sources were c

RoCE/infiniband upgrade to Linux v4.9 for kernel and userspace.

This commit merges projects/bsd_rdma_4_9 to head.

List of kernel sources used:
============================

1) kernel sources were cloned from git://github.com/torvalds/linux.git
Top commit 69973b830859bc6529a7a0468ba0d80ee5117826 - tag: v4.9, linux-4.9

2) krping was cloned from https://github.com/larrystevenwise/krping
Top commit 292a2f1abf0348285e678a82264740d52e4dcfe4

List of userspace sources used:
===============================

1) rdma-core was cloned from https://github.com/linux-rdma/rdma-core.git
Top commit d65138ef93af30b3ea249f3a84aa6a24ba7f8a75

2) OpenSM was cloned from git://git.openfabrics.org/~halr/opensm.git
Top commit 85f841cf209f791c89a075048a907020e924528d

3) libibmad was cloned from git://git.openfabrics.org/~iraweiny/libibmad.git
Tag 1.3.13 with some additional patches from Mellanox.

4) infiniband-diags was cloned from git://git.openfabrics.org/~iraweiny/infiniband-diags.git
Tag 1.6.7 with some additional patches from Mellanox.

NOTES:
======

1) The mthca driver has been removed in kernel and in userspace.
2) All GPLv2 only sources have been removed and where applicable
rewritten from scratch under a BSD license.
3) List of fully supported drivers in userspace and kernel:
a) iw_cxgbe (Chelsio)
b) mlx4ib (Mellanox)
c) mlx5ib (Mellanox)
4) WITH_OFED=YES is still required by make in order to build
OFED userspace and kernel code.
5) Full support has been added for routable RoCE, RoCE v2.

Sponsored by: Mellanox Technologies

show more ...

Update mlx4ib(4) to Linux 4.9.

Sponsored by: Mellanox Technologies

Merge ^/head r306412 through r306905.

Move the ConnectX-3 and ConnectX-2 driver from sys/ofed into sys/dev/mlx4
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of

Move the ConnectX-3 and ConnectX-2 driver from sys/ofed into sys/dev/mlx4
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.

- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.

- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.

- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.

- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .

Sponsored by: Mellanox Technologies

show more ...