mlx4: Map core_clock page to user space only when allowed

Currently when we map the hca_core_clock page to the user space,
there are vulnerable registers, one of which is semaphore, on
this page as

mlx4: Map core_clock page to user space only when allowed

Currently when we map the hca_core_clock page to the user space,
there are vulnerable registers, one of which is semaphore, on
this page as well. If user read the wrong offset, it can modify the
above semaphore and hang the device.

Hence, mapping the hca_core_clock page to the user space only when
user required it specifically.

After this patch, mlx4 core_clock won't be mapped to user space by
default. Oppose to current state, where mlx4 core_clock is always mapped
to user space.

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

show more ...

Merge ^/head r340918 through r341763.

mlx4: Add board identifier and firmware version to sysctl

In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware versi

mlx4: Add board identifier and firmware version to sysctl

In last mlx4 update (r325841) we lost the sysctl to show the
firmware version for mlx4 devices.
Add both board identifier and firmware version under:
sys.device.mlx4_core0.hw sysctl node.

Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

RoCE/infiniband upgrade to Linux v4.9 for kernel and userspace.

This commit merges projects/bsd_rdma_4_9 to head.

List of kernel sources used:
============================

1) kernel sources were c

RoCE/infiniband upgrade to Linux v4.9 for kernel and userspace.

This commit merges projects/bsd_rdma_4_9 to head.

List of kernel sources used:
============================

1) kernel sources were cloned from git://github.com/torvalds/linux.git
Top commit 69973b830859bc6529a7a0468ba0d80ee5117826 - tag: v4.9, linux-4.9

2) krping was cloned from https://github.com/larrystevenwise/krping
Top commit 292a2f1abf0348285e678a82264740d52e4dcfe4

List of userspace sources used:
===============================

1) rdma-core was cloned from https://github.com/linux-rdma/rdma-core.git
Top commit d65138ef93af30b3ea249f3a84aa6a24ba7f8a75

2) OpenSM was cloned from git://git.openfabrics.org/~halr/opensm.git
Top commit 85f841cf209f791c89a075048a907020e924528d

3) libibmad was cloned from git://git.openfabrics.org/~iraweiny/libibmad.git
Tag 1.3.13 with some additional patches from Mellanox.

4) infiniband-diags was cloned from git://git.openfabrics.org/~iraweiny/infiniband-diags.git
Tag 1.6.7 with some additional patches from Mellanox.

NOTES:
======

1) The mthca driver has been removed in kernel and in userspace.
2) All GPLv2 only sources have been removed and where applicable
rewritten from scratch under a BSD license.
3) List of fully supported drivers in userspace and kernel:
a) iw_cxgbe (Chelsio)
b) mlx4ib (Mellanox)
c) mlx5ib (Mellanox)
4) WITH_OFED=YES is still required by make in order to build
OFED userspace and kernel code.
5) Full support has been added for routable RoCE, RoCE v2.

Sponsored by: Mellanox Technologies

show more ...

Merge ^/head r325663 through r325841.

Update the mlx4 core and mlx4en(4) modules towards Linux v4.9.

Background:
The coming ibcore update forces an update of mlx4ib(4) which in turn requires
an updated mlx4 core module. This also affect

Update the mlx4 core and mlx4en(4) modules towards Linux v4.9.

Background:
The coming ibcore update forces an update of mlx4ib(4) which in turn requires
an updated mlx4 core module. This also affects the mlx4en(4) module because
commonly used APIs are updated. This commit is a middle step updating the
mlx4 modules towards the new ibcore.

This change contains no major new features.

Changes in mlx4:
a) Improved error handling when mlx4 PCI devices are
detached inside VMs.
b) Major update of codebase towards Linux 4.9.

Changes in mlx4ib(4):
a) Minimal changes needed in order to compile using the
updated mlx4 core APIs.

Changes in mlx4en(4):
a) Update flow steering code in mlx4en to use new APIs for
registering MAC addresses and IP addresses.
b) Update all statistics counters to be 64-bit.
c) Minimal changes needed in order to compile using the
updated mlx4 core APIs.

Sponsored by: Mellanox Technologies
MFC after: 1 week

show more ...

Merge ^/head r321383 through r322397.

MFhead@r321970

MFhead@r321829

Remove some dead statistics related code and a structure field from the
mlx4en driver which is used by its Linux counterpart, but not under
FreeBSD.

Sponsored by: Mellanox Technologies
MFC after: 1

Remove some dead statistics related code and a structure field from the
mlx4en driver which is used by its Linux counterpart, but not under
FreeBSD.

Sponsored by: Mellanox Technologies
MFC after: 1 week

show more ...

Fix broken usage of the mlx4_read_clock() function:
- return value has too small width
- cycle_t is unsigned and cannot be less than zero

Sponsored by: Mellanox Technologies
MFC after: 1 week

Merge ^/head r313301 through r313643.

Change mlx4 QP allocation scheme.

When using Blue-Flame, BF, the QPN overrides the VLAN, CV, and SV
fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7
unset.

The current ethernet d

Change mlx4 QP allocation scheme.

When using Blue-Flame, BF, the QPN overrides the VLAN, CV, and SV
fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7
unset.

The current ethernet driver code reserves a TX QP range with 256b
alignment.

This is wrong because if there are more than 64 TX QPs in use, QPNs >=
base + 65 will have bits 6/7 set.

This problem is not specific for the Ethernet driver, any entity that
tries to reserve more than 64 BF-enabled QPs should fail. Also, using
ranges is not necessary here and is wasteful.

The new mechanism introduced here will support reservation for "Eth
QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs
(when hypervisors support WC in VMs). The flow we use is:

1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation,
and request "BF enabled QPs" if BF is supported for the function

2. In the ALLOC_RES FW command, change param1 to:
a. param1[23:0] - number of QPs
b. param1[31-24] - flags controlling QPs reservation

Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits
6 and 7 unset in order to be used in Ethernet.

Bits 24-30 of the flags are currently reserved.

When a function tries to allocate a QP, it states the required
attributes for this QP. Those attributes are considered "best-effort".
If an attribute, such as Ethernet BF enabled QP, is a must-have
attribute, the function has to check that attribute is supported
before trying to do the allocation.

In a lower layer of the code, mlx4_qp_reserve_range masks out the bits
which are unsupported. If SRIOV is used, the PF validates those
attributes and masks out unsupported attributes as well. In order to
notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP
command. This command's mailbox is filled by the PF, which notifies
which QP allocation attributes it supports.

Obtained from: Linux (dual BSD/GPLv2 licensed)
Submitted by: Dexuan Cui @ microsoft . com
Differential Revision: https://reviews.freebsd.org/D8868
MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

Flexible and asymmetric allocation of EQs and MSI-X vectors for PF/VFs.

Previously, the mlx4 driver queried the firmware in order to get the
number of supported EQs. Under SRIOV, since this was done

Flexible and asymmetric allocation of EQs and MSI-X vectors for PF/VFs.

Previously, the mlx4 driver queried the firmware in order to get the
number of supported EQs. Under SRIOV, since this was done before the
driver notified the firmware how many VFs it actually needs, the
firmware had to take into account a worst case scenario and always
allocated four EQs per VF, where one was used for events while the
others were used for completions. Now, when the firmware supports the
asymmetric allocation scheme, denoted by exposing num_sys_eqs > 0 (-->
MLX4_DEV_CAP_FLAG2_SYS_EQS), we use the QUERY_FUNC command to query
the firmware before enabling SRIOV. Thus we can get more EQs and MSI-X
vectors per function. Moreover, when running in the new
firmware/driver mode, the limitation that the number of EQs should be
a power of two is lifted.

Obtained from: Linux (dual BSD/GPLv2 licensed)
Submitted by: Dexuan Cui @ microsoft . com
Differential Revision: https://reviews.freebsd.org/D8867
MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

Merge ^/head r306412 through r306905.

Move the ConnectX-3 and ConnectX-2 driver from sys/ofed into sys/dev/mlx4
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of

Move the ConnectX-3 and ConnectX-2 driver from sys/ofed into sys/dev/mlx4
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.

- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.

- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.

- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.

- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .

Sponsored by: Mellanox Technologies

show more ...