|
Revision tags: release/14.0.0 |
|
| #
95ee2897 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
4d846d26 |
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
show more ...
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
718cf2cc |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0 |
|
| #
a3906ca5 |
| 17-Feb-2017 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r313644 through r313895.
|
| #
68872de6 |
| 16-Feb-2017 |
Warner Losh <imp@FreeBSD.org> |
Remove support for EISA in the ida driver. Remove references to
EISA-only registers. Remove known EISA cards from man page.
|
|
Revision tags: release/11.0.1, release/11.0.0 |
|
| #
453130d9 |
| 03-May-2016 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
|
|
Revision tags: release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0 |
|
| #
014fbb87 |
| 13-Apr-2005 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
Define additional commands.
Obtained from: Linux
|
| #
b1a9ec04 |
| 13-Apr-2005 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
Whitespace cleanup.
|
|
Revision tags: release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1 |
|
| #
b7279e13 |
| 15-Jan-2004 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
- Add comments.
- Add more command defines and data structures.
- Re-organize struct ida_drive_info to factor out struct ida_drive_info
which will be used elsewhere.
|
| #
ddd531b3 |
| 13-Jan-2004 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
style(9): single tab after #define.
|
|
Revision tags: release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs |
|
| #
4f492bfa |
| 23-Sep-2002 |
Alfred Perlstein <alfred@FreeBSD.org> |
use __packed.
|
|
Revision tags: release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs, release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs |
|
| #
1277c3ba |
| 28-Jul-2000 |
Jonathan Lemon <jlemon@FreeBSD.org> |
The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.
Also, when using more than two smart controllers in
The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.
Also, when using more than two smart controllers in one machine, the
disks were assigned the wrong drive number; fix this as well.
show more ...
|
|
Revision tags: release/4.1.0, release/3.5.0_cvs |
|
| #
ceaa35ef |
| 16-Apr-2000 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
- Define registers as offsets from register base rather than offsets from
EISA slot base.
- Remove unused IOPORT resource.
Reviewed by: jlemon
|
|
Revision tags: release/4.0.0_cvs |
|
| #
ee7eb00e |
| 08-Mar-2000 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.
Tes
Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.
Tested by: david.w.james@bt.com (existing compaq support)
Reviewed by: msmith
Approved by: jordan
show more ...
|
|
Revision tags: release/3.4.0_cvs, release/3.3.0_cvs |
|
| #
c3aac50f |
| 28-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|
| #
db57feb7 |
| 24-Jun-1999 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Compaq Smart RAID driver for -current. Based on the original ida.c
driver by Mark Dawson. This probably needs some work, but is stable
enough to boot a RAID-only configuration, and survive `make wo
Compaq Smart RAID driver for -current. Based on the original ida.c
driver by Mark Dawson. This probably needs some work, but is stable
enough to boot a RAID-only configuration, and survive `make world'.
show more ...
|
|
Revision tags: release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0 |
|
| #
014fbb87 |
| 13-Apr-2005 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
Define additional commands.
Obtained from: Linux
|
| #
b1a9ec04 |
| 13-Apr-2005 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
Whitespace cleanup.
|
|
Revision tags: release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1 |
|
| #
b7279e13 |
| 15-Jan-2004 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
- Add comments.
- Add more command defines and data structures.
- Re-organize struct ida_drive_info to factor out struct ida_drive_info
which will be used elsewhere.
|
| #
ddd531b3 |
| 13-Jan-2004 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
style(9): single tab after #define.
|
|
Revision tags: release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs |
|
| #
4f492bfa |
| 23-Sep-2002 |
Alfred Perlstein <alfred@FreeBSD.org> |
use __packed.
|
|
Revision tags: release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs, release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs |
|
| #
1277c3ba |
| 28-Jul-2000 |
Jonathan Lemon <jlemon@FreeBSD.org> |
The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.
Also, when using more than two smart controllers in
The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.
Also, when using more than two smart controllers in one machine, the
disks were assigned the wrong drive number; fix this as well.
show more ...
|
|
Revision tags: release/4.1.0, release/3.5.0_cvs |
|
| #
ceaa35ef |
| 16-Apr-2000 |
Matthew N. Dodd <mdodd@FreeBSD.org> |
- Define registers as offsets from register base rather than offsets from
EISA slot base.
- Remove unused IOPORT resource.
Reviewed by: jlemon
|
|
Revision tags: release/4.0.0_cvs |
|
| #
ee7eb00e |
| 08-Mar-2000 |
Jonathan Lemon <jlemon@FreeBSD.org> |
Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.
Tes
Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.
Tested by: david.w.james@bt.com (existing compaq support)
Reviewed by: msmith
Approved by: jordan
show more ...
|
|
Revision tags: release/3.4.0_cvs, release/3.3.0_cvs |
|
| #
c3aac50f |
| 28-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|