ice: Update to 1.43.2-k

- Add extra time while waiting for an EMPR to finish on E830 and E825C
devices
- Fix debug mask sysctl help message
- Handle EAGAIN error messages from the Get Link Status

ice: Update to 1.43.2-k

- Add extra time while waiting for an EMPR to finish on E830 and E825C
devices
- Fix debug mask sysctl help message
- Handle EAGAIN error messages from the Get Link Status AQ command by
retrying them several times
- Handle the condition where E830 extended temperature SKUs can have the
chip initialize without the PHY subsystem being ready due to very low
temperatures; the driver will print out a message when this happens
- Fix inability to set link speed using the advertise_speed sysctl when
link is down and the link_active_on_if_down sysctl is set to 0
- Fix issue where VLANs would not properly be set back up after a
hardware reset (e.g. PF reset) (Thanks jacob.e.keller@intel.com)

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 2 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D46951

show more ...

ice: Update to 1.42.5-k

- Removes duplicate E825C printout
- Fixes a package download issue with E830
- Updates mentions of E830-XXV to E830-L
- Fix FW logging on load issue by limiting the setting

ice: Update to 1.42.5-k

- Removes duplicate E825C printout
- Fixes a package download issue with E830
- Updates mentions of E830-XXV to E830-L
- Fix FW logging on load issue by limiting the setting of FW log masks
and other global configuration to just the first PF of the controller
- Update ice_hw_autogen.h with timesync registers (unused in this
driver)
- Fix possible overflow condition in NVM access function
- Blocks RDMA load on E830 devices

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 2 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D46950

show more ...

ice: Update to 1.42.1-k

Summary:
- Adds E830 device support
- Adds pre-release E825C support (for the Ethernet device included in
an upcoming Xeon D platform)
- Add sysctl for E810 devices to prin

ice: Update to 1.42.1-k

Summary:
- Adds E830 device support
- Adds pre-release E825C support (for the Ethernet device included in
an upcoming Xeon D platform)
- Add sysctl for E810 devices to print out PHY debug statistics (mostly
for FEC debugging)
- Adds per-TX-queue tso counter sysctl to count how many times a TSO offload
was requested for a packet, matching other Intel drivers
- Various bug fixes

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 2 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revisison: https://reviews.freebsd.org/D46949

show more ...

ice(4): Stop checking for failures from malloc(M_WAITOK)

As a consequence now ice_alloc_vsi_qmap() does not fail. Remove unneeded
error checks.

MFC after: 1 week
Differential Revision: https://revi

ice(4): Stop checking for failures from malloc(M_WAITOK)

As a consequence now ice_alloc_vsi_qmap() does not fail. Remove unneeded
error checks.

MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D45852

show more ...

ice(4): Update to 1.39.13-k

- Adds mirror interface functionality
- Remove unused virtchnl headers

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

MFC-with: 768329961dc0c041f7647f1c4549944a2ca168aa
M

ice(4): Update to 1.39.13-k

- Adds mirror interface functionality
- Remove unused virtchnl headers

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

MFC-with: 768329961dc0c041f7647f1c4549944a2ca168aa
MFC after: 3 days
Sponsored by: Intel Corporation
Tested by: jeffrey.e.pieper@intel.com
Differential Revision: https://reviews.freebsd.org/D44004

show more ...

ice(4): Update copyright year to 2024

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D44003

ice(4): Update to 1.38.16-k

New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the inte

ice(4): Update to 1.38.16-k

New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)

Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655

show more ...

sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

ice(4): Update to 1.37.11-k

This driver update has no corresponding ice_ddp update, and doesn't
contain very many functional changes:
- Some refactoring for future SR-IOV PF support
- Various minor

ice(4): Update to 1.37.11-k

This driver update has no corresponding ice_ddp update, and doesn't
contain very many functional changes:
- Some refactoring for future SR-IOV PF support
- Various minor fixes

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D39821

show more ...

ice(4): Use the existing CTLFLAG_RWTUN flag definition

Use it when possible, instead of separated flags.

No functional change intended.

Reviewed by: hselasky, erj
MFC after: 3 days
Differential Re

ice(4): Use the existing CTLFLAG_RWTUN flag definition

Use it when possible, instead of separated flags.

No functional change intended.

Reviewed by: hselasky, erj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39466

show more ...

IfAPI: Finish changes of ice(4).

Reviewed by: erj
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38423

ice(4): Update to 1.37.7-k

Notable changes include:

- DSCP QoS Support (leveraging support added in
rG9c950139051298831ce19d01ea5fb33ec6ea7f89)
- Improved PFC handling and TC queue assignments (n

ice(4): Update to 1.37.7-k

Notable changes include:

- DSCP QoS Support (leveraging support added in
rG9c950139051298831ce19d01ea5fb33ec6ea7f89)
- Improved PFC handling and TC queue assignments (now all remaining
queues are assigned to TC 0 when more than one TC is enabled and the
number of available queues does not evenly divide between them)
- Support for dumping the internal FW state for additional debugging by
Intel support
- Support for allowing "No FEC" to be a valid state for the LESM to
negotiate when using non-standard compliant modules

Also includes various bug fixes and smaller enhancements, too.

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Reviewed by: erj@
Tested by: Jeff Pieper <jeffrey.pieper@intel.com>
MFC after: 3 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38109

show more ...

Convert iflib(4) and iflib-based drivers to the DrvAPI

Summary:
Convert iflib(4) and the following drivers:
* axgbe
* em
* ice
* ixl
* vmxnet

Sponsored by: Juniper Networks, Inc.
Reviewed by: kbowl

Convert iflib(4) and iflib-based drivers to the DrvAPI

Summary:
Convert iflib(4) and the following drivers:
* axgbe
* em
* ice
* ixl
* vmxnet

Sponsored by: Juniper Networks, Inc.
Reviewed by: kbowling, #iflib
Differential Revision: https://reviews.freebsd.org/D37768

show more ...

ice(4): Add RDMA Client Interface

This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access

ice(4): Add RDMA Client Interface

This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.

This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.

Note:

Adds hack to module Makefile to compile interface/.m files

These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889

show more ...

ice: Remove a double word in a source code comment

- s/is is/is/

MFC after: 3 days

ice(4): Update to 1.34.2-k

- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
d

ice(4): Update to 1.34.2-k

- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024

show more ...

ice(4): Update to version 0.29.4-k

Includes various feature improvements and bug fixes.

Notable changes include:
- Firmware logging support
- Link management flow changes
- New sysctl to report agg

ice(4): Update to version 0.29.4-k

Includes various feature improvements and bug fixes.

Notable changes include:
- Firmware logging support
- Link management flow changes
- New sysctl to report aggregated error counts
- Health Status Event reporting from firmware (Use the new read-only
tunables hw.ice.enable_health_events / dev.ice.#.enable_health_events
to turn this off)

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Sponsored by: Intel Corporation

show more ...

ice(4): Update to version 0.28.1-k

This updates the driver to align with the version included in
the "Intel Ethernet Adapter Complete Driver Pack", version 25.6.

There are no major functional chang

ice(4): Update to version 0.28.1-k

This updates the driver to align with the version included in
the "Intel Ethernet Adapter Complete Driver Pack", version 25.6.

There are no major functional changes; this mostly contains
bug fixes and changes to prepare for new features. This version
of the driver uses the previously committed ice_ddp package
1.3.19.0.

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28640

show more ...

ice(4): Update to 0.26.16

Summary of changes:

- Assorted bug fixes
- Support for newer versions of the device firmware
- Suspend/resume support
- Support for Lenient Link Mode for E82X devices (e.g

ice(4): Update to 0.26.16

Summary of changes:

- Assorted bug fixes
- Support for newer versions of the device firmware
- Suspend/resume support
- Support for Lenient Link Mode for E82X devices (e.g. can try to link with
SFP/QSFP modules with bad EEPROMs)
- Adds port-level rx_discards sysctl, similar to ixl(4)'s

This version of the driver is intended to be used with DDP package 1.3.16.0,
which has already been updated in a previous commit.

Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 3 days
MFC with: r365332, r365550
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D26322

show more ...

ice(4): Introduce new driver for Intel E800 Ethernet controllers

The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia P

ice(4): Introduce new driver for Intel E800 Ethernet controllers

The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.

These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.

For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.

A man page for this driver will be forthcoming.

MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959

show more ...