sys: Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

Mechanically convert fwe(4) and fwip(4) to IfAPI

Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37850

Merge ^/head r325842 through r325998.

spdx: initial adoption of licensing ID tags.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensou

spdx: initial adoption of licensing ID tags.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133

show more ...

MFp4: MPSAFE firewire stack.
- lock its own locks and drop Giant.
- create its own taskqueue thread.
- split interrupt routine
- use interrupt filter as a fast interrupt.
- run watchdog timer in task

MFp4: MPSAFE firewire stack.
- lock its own locks and drop Giant.
- create its own taskqueue thread.
- split interrupt routine
- use interrupt filter as a fast interrupt.
- run watchdog timer in taskqueue so that it should be
serialized with the bottom half.
- add extra sanity check for transaction labels.
disable ad-hoc workaround for unknown tlabels.
- add sleep/wakeup synchronization primitives
- don't reset OHCI in fwohci_stop()

show more ...

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a c

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

show more ...

Start each of the license/copyright comments with /*-, minor shuffle of lines

MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdm

MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE.
- AR buffer handling.
Don't reallocate AR buffer but just recycle it.
Don't malloc and copy per packet in fwohci_arcv().
Pass packet to fw_rcv() using iovec.
Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode. We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
not cycle master capable but set myself for root node.
We should be the root node after next bus reset.

Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer

show more ...

MFp4(simokawa_sbp)

Improve if_fwe performance.
- Simplify mbuf handling by using bulkxfer.
Now, it uses mbuf clusters for RX buffer as usual ethernet drivers.
- Recycle struct xfer buffer and don't

MFp4(simokawa_sbp)

Improve if_fwe performance.
- Simplify mbuf handling by using bulkxfer.
Now, it uses mbuf clusters for RX buffer as usual ethernet drivers.
- Recycle struct xfer buffer and don't call malloc at runtime.
- Count input and output errors.
- Handle a mbuf chain longer than 6 correctly.
- Increase queue length.

show more ...

Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial
Bus Protocol 2:SCSI over IEEE1394) support for CAM.

MFp4: MPSAFE firewire stack.
- lock its own locks and drop Giant.
- create its own taskqueue thread.
- split interrupt routine
- use interrupt filter as a fast interrupt.
- run watchdog timer in task

MFp4: MPSAFE firewire stack.
- lock its own locks and drop Giant.
- create its own taskqueue thread.
- split interrupt routine
- use interrupt filter as a fast interrupt.
- run watchdog timer in taskqueue so that it should be
serialized with the bottom half.
- add extra sanity check for transaction labels.
disable ad-hoc workaround for unknown tlabels.
- add sleep/wakeup synchronization primitives
- don't reset OHCI in fwohci_stop()

show more ...

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a c

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

show more ...

Start each of the license/copyright comments with /*-, minor shuffle of lines

MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdm

MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current. Mark the interrupt routine as MPSAFE.
- AR buffer handling.
Don't reallocate AR buffer but just recycle it.
Don't malloc and copy per packet in fwohci_arcv().
Pass packet to fw_rcv() using iovec.
Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode. We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
not cycle master capable but set myself for root node.
We should be the root node after next bus reset.

Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer

show more ...

MFp4(simokawa_sbp)

Improve if_fwe performance.
- Simplify mbuf handling by using bulkxfer.
Now, it uses mbuf clusters for RX buffer as usual ethernet drivers.
- Recycle struct xfer buffer and don't

MFp4(simokawa_sbp)

Improve if_fwe performance.
- Simplify mbuf handling by using bulkxfer.
Now, it uses mbuf clusters for RX buffer as usual ethernet drivers.
- Recycle struct xfer buffer and don't call malloc at runtime.
- Count input and output errors.
- Handle a mbuf chain longer than 6 correctly.
- Increase queue length.

show more ...

Initial import for IEEE1394 OHCI chipdet device driver and SBP-2 (Serial
Bus Protocol 2:SCSI over IEEE1394) support for CAM.