sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Regularize my copyright notice

o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't clai

Regularize my copyright notice

o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.

show more ...

Use M. Warner Losh everywhere on my copyrights.
Remove 'All Rights Reserved' where I can.

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFhead@r313243

Merge ^/head r312894 through r312967.

Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes: yes

IFH@204581

Merge from head at r201628.

# This hasn't been tested, and there are at least three bad commits
# that need to be backed out before the branch will be stable again.

CardBus instead of cardbus.

The TOPIC97 and TOPIC100 seem to have a special register in the exca
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may

The TOPIC97 and TOPIC100 seem to have a special register in the exca
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may work.

Existance noticed in NetBSD driver.

show more ...

Start each of the license/copyright comments with /*-, minor shuffle of lines

Add two of three workarounds for interrupt storms for o2micro parts as
obtained from o2micro. These should only be needed for 'older'
o2micro bridges (anything before the 7xxx series of bridges), bu

Add two of three workarounds for interrupt storms for o2micro parts as
obtained from o2micro. These should only be needed for 'older'
o2micro bridges (anything before the 7xxx series of bridges), but will
work with the new bridges.

# I don't plan on porting it to oldcard, but will happily commit to
# oldcard if someone else needs them.

show more ...

Massive overhaul of exca to help with the isa efforts:
o chip_name arrays ifdef'd out.
o use the OLDCARD-like get/put functions so we can support differnt types
of mappings.
o Write the beggings of

Massive overhaul of exca to help with the isa efforts:
o chip_name arrays ifdef'd out.
o use the OLDCARD-like get/put functions so we can support differnt types
of mappings.
o Write the beggings of is this a valid exca device and introduce more
chipset support.

# this is partially a wip, but also needed because some other cahnges I've
# made require some of these changes.

show more ...

MFp4:
o Protect .h against multiple includes.
o eliminate the pointers to the read/write routines. The
bus_space_read routines can cope since we have the offset
field.
o Print a warning if

MFp4:
o Protect .h against multiple includes.
o eliminate the pointers to the read/write routines. The
bus_space_read routines can cope since we have the offset
field.
o Print a warning if the requested map address is > 16M and
your chipset doesn't support the extended ExCA registers.

show more ...

First draft of common code between pccbb and pcic drivers for talking
to ExCA register sets. These registers exist in both ISA and PCI
devices in a couple different ways, and this will provide a com

First draft of common code between pccbb and pcic drivers for talking
to ExCA register sets. These registers exist in both ISA and PCI
devices in a couple different ways, and this will provide a common
base for future building. This code is a rehash of the pccbb 16-bit
code, which was a rehash of the pcic code, which was a rehash of the
netbsd i82365 code. More hashing to come.

show more ...

Merge from head at r201628.

# This hasn't been tested, and there are at least three bad commits
# that need to be backed out before the branch will be stable again.

CardBus instead of cardbus.

The TOPIC97 and TOPIC100 seem to have a special register in the exca
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may

The TOPIC97 and TOPIC100 seem to have a special register in the exca
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may work.

Existance noticed in NetBSD driver.

show more ...

Start each of the license/copyright comments with /*-, minor shuffle of lines

Add two of three workarounds for interrupt storms for o2micro parts as
obtained from o2micro. These should only be needed for 'older'
o2micro bridges (anything before the 7xxx series of bridges), bu

Add two of three workarounds for interrupt storms for o2micro parts as
obtained from o2micro. These should only be needed for 'older'
o2micro bridges (anything before the 7xxx series of bridges), but will
work with the new bridges.

# I don't plan on porting it to oldcard, but will happily commit to
# oldcard if someone else needs them.

show more ...

Massive overhaul of exca to help with the isa efforts:
o chip_name arrays ifdef'd out.
o use the OLDCARD-like get/put functions so we can support differnt types
of mappings.
o Write the beggings of

Massive overhaul of exca to help with the isa efforts:
o chip_name arrays ifdef'd out.
o use the OLDCARD-like get/put functions so we can support differnt types
of mappings.
o Write the beggings of is this a valid exca device and introduce more
chipset support.

# this is partially a wip, but also needed because some other cahnges I've
# made require some of these changes.

show more ...

MFp4:
o Protect .h against multiple includes.
o eliminate the pointers to the read/write routines. The
bus_space_read routines can cope since we have the offset
field.
o Print a warning if

MFp4:
o Protect .h against multiple includes.
o eliminate the pointers to the read/write routines. The
bus_space_read routines can cope since we have the offset
field.
o Print a warning if the requested map address is > 16M and
your chipset doesn't support the extended ExCA registers.

show more ...

First draft of common code between pccbb and pcic drivers for talking
to ExCA register sets. These registers exist in both ISA and PCI
devices in a couple different ways, and this will provide a com

First draft of common code between pccbb and pcic drivers for talking
to ExCA register sets. These registers exist in both ISA and PCI
devices in a couple different ways, and this will provide a common
base for future building. This code is a rehash of the pccbb 16-bit
code, which was a rehash of the pcic code, which was a rehash of the
netbsd i82365 code. More hashing to come.

show more ...