sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

e1000: expose MAC functions

Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@int

e1000: expose MAC functions

Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>

Approved by: imp
Obtained from: DPDK (df01c0ee277d51f81d7d72501dba97550d3b6c4a)
MFC after: 1 week

show more ...

e1000: Update copyrights and readme

Copyrights in sync with "cid-gigabit.2020.06.05.tar.gz released by ND"
(from DPDK).

README from the latest em-7.7.8 on intel.com

Approved by: imp
MFC after: 1 w

e1000: Update copyrights and readme

Copyrights in sync with "cid-gigabit.2020.06.05.tar.gz released by ND"
(from DPDK).

README from the latest em-7.7.8 on intel.com

Approved by: imp
MFC after: 1 week

show more ...

e1000: Revert Update intel shared code

This reverts commit fc7682b17f3738573099b8b03f5628dcc8148adb.

This will be done incrementally to help with bisecting an issue in
later I21x devices (ich8lan).

e1000: Revert Update intel shared code

This reverts commit fc7682b17f3738573099b8b03f5628dcc8148adb.

This will be done incrementally to help with bisecting an issue in
later I21x devices (ich8lan).

PR: 258153
Approved by: imp
MFC after: 1 day

show more ...

e1000: Update intel shared code

Sync the e1000 shared code with DPDK shared code
"cid-gigabit.2020.06.05.tar.gz released by ND"

Primary focus was on client platforms (ich8lan). More work remains he

e1000: Update intel shared code

Sync the e1000 shared code with DPDK shared code
"cid-gigabit.2020.06.05.tar.gz released by ND"

Primary focus was on client platforms (ich8lan). More work remains here
but we need an Intel contact for client networking.

Reviewed by: grehan, Intel Networking (erj, earlier rev)
Obtained from: DPDK <http://git.dpdk.org/dpdk/tree/drivers/net/e1000/base>
MFC after: 1 week
Sponsored by: me
Differential Revision: https://reviews.freebsd.org/D31547

show more ...

Sleep rather than spin in e1000 when doing long running config operations.

With r333218 it is now possible for drivers to use an sx lock and thus sleep while
waiting on long running operations rathe

Sleep rather than spin in e1000 when doing long running config operations.

With r333218 it is now possible for drivers to use an sx lock and thus sleep while
waiting on long running operations rather than DELAY().

Reported by: gallatin
Reviewed by: sbruno
Approved by: sbruno
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14984

show more ...

Merge ^/head r325999 through r326131.

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

show more ...

Merge ^/head r323559 through r325504.

Revert r323516 (iflib rollup)

This was really too big of a commit even if everything worked, but there
are multiple new issues introduced in the one huge commit, so it's not
worth keeping this until

Revert r323516 (iflib rollup)

This was really too big of a commit even if everything worked, but there
are multiple new issues introduced in the one huge commit, so it's not
worth keeping this until it's fixed.

I'll work on splitting this up into logical chunks and introduce them one
at a time over the next week or two.

Approved by: sbruno (mentor)
Sponsored by: Limelight Networks

show more ...

MFH @ r323558.

Roll up iflib commits from github. This pulls in most of the work done
by Matt Macy as well as other changes which he has accepted via pull
request to his github repo at https://github.com/mattmacy/

Roll up iflib commits from github. This pulls in most of the work done
by Matt Macy as well as other changes which he has accepted via pull
request to his github repo at https://github.com/mattmacy/networking/

This should bring -CURRENT and the github repo into close enough sync to
allow small feature branches rather than a large chain of interdependant
patches being developed out of tree. The reset of the synchronization
should be able to be completed on github by splitting the remaining
changes that are not yet ready into short feature branches for later
review as smaller commits.

Here is a summary of changes included in this patch:

1) More checks when INVARIANTS are enabled for eariler problem
detection
2) Group Task Queue cleanups
- Fix use of duplicate shortdesc for gtaskqueue malloc type.
Some interfaces such as memguard(9) use the short description to
identify malloc types, so duplicates should be avoided.
3) Allow gtaskqueues to use ithreads in addition to taskqueues
- In some cases, this can improve performance
4) Better logging when taskqgroup_attach*() fails to set interrupt
affinity.
5) Do not start gtaskqueues until they're needed
6) Have mp_ring enqueue function enter the ABDICATED rather than BUSY
state. This moves the TX to the gtaskq and allows processing to
continue faster as well as make TX batching more likely.
7) Add an ift_txd_errata function to struct if_txrx. This allows
drivers to inspect/modify mbufs before transmission.
8) Add a new IFLIB_NEED_ZERO_CSUM for drivers to indicate they need
checksums zeroed for checksum offload to work. This avoids modifying
packet data in the TX path when possible.
9) Use ithreads for iflib I/O instead of taskqueues
10) Clean up ioctl and support async ioctl functions
11) Prefetch two cachlines from each mbuf instead of one up to 128B. We
often need to parse packet header info beyond 64B.
12) Fix potential memory corruption due to fence post error in
bit_nclear() usage.
13) Improved hang detection and handling
14) If the packet is smaller than MTU, disable the TSO flags.
This avoids extra packet parsing when not needed.
15) Move TCP header parsing inside the IS_TSO?() test.
This avoids extra packet parsing when not needed.
16) Pass chains of mbufs that are not consumed by lro to if_input()
rather call if_input() for each mbuf.
17) Re-arrange packet header loads to get as much work as possible done
before a cache stall.
18) Lock the context when calling IFDI_ATTACH_PRE()/IFDI_ATTACH_POST()/
IFDI_DETACH();
19) Attempt to distribute RX/TX tasks across cores more sensibly,
especially when RX and TX share an interrupt. RX will attempt to
take the first threads on a core, and TX will attempt to take
successive threads.
20) Allow iflib_softirq_alloc_generic() to request affinity to the same
cpus an interrupt has affinity with. This allows TX queues to
ensure they are serviced by the socket the device is on.
21) Add new iflib sysctls to net.iflib:
- timer_int - interval at which to run per-queue timers in ticks
- force_busdma
22) Add new per-device iflib sysctls to dev.X.Y.iflib
- rx_budget allows tuning the batch size on the RX path
- watchdog_events Count of watchdog events seen since load
23) Fix error where netmap_rxq_init() could get called before
IFDI_INIT()
24) e1000: Fixed version of r323008: post-cold sleep instead of DELAY
when waiting for firmware
- After interrupts are enabled, convert all waits to sleeps
- Eliminates e1000 software/firmware synchronization busy waits after
startup
25) e1000: Remove special case for budget=1 in em_txrx.c
- Premature optimization which may actually be incorrect with
multi-segment packets
26) e1000: Split out TX interrupt rather than share an interrupt for
RX and TX.
- Allows better performance by keeping RX and TX paths separate
27) e1000: Separate igb from em code where suitable
Much easier to understand separate functions and "if (is_igb)" than
previous tests like "if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))"

#blamebruno

Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12235

show more ...

Revert r323008 and its conversion of e1000/iflib to using SX locks.

This seems to be missing something on the 82574L causing NFS root mounts
to hang.

Reported by: kib

Continuation of lock cleanup in e1000.

Post-cold sleep instead of DELAY when waiting for firmware.

Convert softc mutex to an SX lock. Change all waits to sleeps
once interrupts are enabled (and it

Continuation of lock cleanup in e1000.

Post-cold sleep instead of DELAY when waiting for firmware.

Convert softc mutex to an SX lock. Change all waits to sleeps
once interrupts are enabled (and it is safe to sleep).

Submitted by: Matt Macy <matt@mattmacy.io>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12101

show more ...

MFH

Sponsored by: The FreeBSD Foundation

Merge ^/head r294961 through r295350.

Update em(4) to 7.6.1; update igb(4) to 2.5.3.

Major changes:

- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff,

Update em(4) to 7.6.1; update igb(4) to 2.5.3.

Major changes:

- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).

- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf

- Avoton (i354) PHY errata workaround added

And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.

Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation

show more ...

Merge from head

Sponsored by: Gandi.net

Merge ^/head r287878 through r288034.

Revert 287914,287762.

Reports of breakage on igb(4) have been narrowed down to 287762 and 287914
is an dependant change.

Submitted by: erj

Merge ^/head r287680 through r287877.

Update em(4) with D3162 after testing further on hardware that failed
to attach with the last version of this commit. This commit fixes
attach failures on "ICH8" class devices via modifications to
e1

Update em(4) with D3162 after testing further on hardware that failed
to attach with the last version of this commit. This commit fixes
attach failures on "ICH8" class devices via modifications to
e1000_init_nvm_params_ich8lan()

- Fix compiler warning in 80003es2lan.c
- Add return value handler for e1000_*_kmrn_reg_80003es2lan
- Fix usage of DEBUGOUT
- Remove unnecessary variable initializations.
- Removed unused variables (complaints from gcc).
- Edit defines in 82571.h.
- Add workaround for igb hw errata.
- Shared code changes for Skylake/I219 support.
- Remove unused OBFF and LTR functions.

Tested by some of the folks that reported breakage in previous incarnation.
Thanks to AllanJude, gjb, gnn, tijl for tempting fate with their machines.

Submitted by: erj@freebsd.org
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3162

show more ...

Finish merging from head, messed up in previous attempt

Merge r286744-r287584 from head.

Merge ^/head r287490 through r287501.