cxgbe(4): Update firmwares to 1.27.5.0

Version : 1.27.5.0
Date : 10/10/2023
=====================
Fixes
-----

BASE:
- Fixed handling the Remote Fault with AN, causing the link failure.
=========

cxgbe(4): Update firmwares to 1.27.5.0

Version : 1.27.5.0
Date : 10/10/2023
=====================
Fixes
-----

BASE:
- Fixed handling the Remote Fault with AN, causing the link failure.
=====================

Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications

show more ...

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

cxgbe(4): Update firmwares to 1.27.4.0

This is the list of changes since last release, taken from the release
notes of Chelsio Unified Wire 3.18.0.1.

Version : 1.27.4.0
Date : 07/05/2023
=======

cxgbe(4): Update firmwares to 1.27.4.0

This is the list of changes since last release, taken from the release
notes of Chelsio Unified Wire 3.18.0.1.

Version : 1.27.4.0
Date : 07/05/2023
=======================================
Fixes
-----

BASE:
- Handle 40G to 100G cable change.
- Avoid unnecessary i2c read.
=======================================

Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
MFC after: 1 week

show more ...

cxgbe(4): Update firmwares to version 1.27.3.0

These are the changes since the last update (copy-pasted from the
release notes for Chelsio Unified Wire v3.18.0.0):

====================
Version : 1.

cxgbe(4): Update firmwares to version 1.27.3.0

These are the changes since the last update (copy-pasted from the
release notes for Chelsio Unified Wire v3.18.0.0):

====================
Version : 1.27.3.0
Date : 04/07/2023

Fixes
-----
BASE:
- Fixed a hang if module eeprom reads gives invalid data.
- KR backlplane no-fec link problem fixed.
OFLD:
- iscsi ddp errors fixed.
- iwarp connection abort in rare cases causing NIC traffic hang fixed.

ENHANCEMENTS
------------
BASE:
- Cisco GLC-TE 1G modules support added.

====================
Version : 1.27.1.0
Date : 12/02/2022

Fixes
-----
BASE:
- memwrite dsgl cannot be used for T5.
OFLD:
- Enabled FCoE in SO adapters.
- TOE-TLS crash fixed.
- iscsi hang fixed.

MFC after: 2 weeks
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.27.0.0.

Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.

Fixes
-----

cxgbe(4): Update firmwares to 1.27.0.0.

Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.

Fixes
-----

BASE:
- Enabled all MA parity interrupt bits.
- Use config file value to override number of rx channel. nrxch=1 was not
handled in the firmware.
- Replaced read only registers with new registers EDC_H_BIST_USER_WDATA0,
EDC_H_BIST_USER_WDATA1 and EDC_H_BIST_CMD_LEN to dump the uP memory parity
error status registers.
- 10G simplex module support enabled.

Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.26.6.0.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CHANGES
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

cxgbe(4): Update firmwares to 1.26.6.0.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CHANGES
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Version : 1.26.6.0
Date : 01/03/2022
================================================================================

Fixes
-----
BASE:
- Fixed one module eeprom read failure.
- Fixed an issue with speed selection when 40G and 25G are advertised and
supported.
- Fixed a random traffic hang when T5 receives invalid ets BW in dcbx
messages from a switch.
- Fixed very long link up time with few switches.
================================================================================

Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.26.4.0

(Rest is from the README that came with the firmware)

Version : 1.26.4.0
Date : 12/02/2021

Fixes
-----

BASE:
- Fixed error on setting 25G speed on 100G c

cxgbe(4): Update firmwares to 1.26.4.0

(Rest is from the README that came with the firmware)

Version : 1.26.4.0
Date : 12/02/2021

Fixes
-----

BASE:
- Fixed error on setting 25G speed on 100G copper with multiple FEC set in
firmware commands.
- Handle link of unknown optics modules by enabling module tx unconditionally.
- Fixed link not coming up for 25G CRS phys. Firmware incorrectly tried to
bring up the link in RS-FEC but as per IEEE spec, it must be BASER FEC.
- Fixed an issue where firmware doesn't automatically retry next FEC if driver
asks to bring up the link using RS-FEC and link doesn't come up.

Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Change the way t4_shutdown_adapter brings the link(s) down.

Modify the GPIO pins only on the Base-T cards and even there drive all
of them low instead of putting them in hi-z state. For t

cxgbe(4): Change the way t4_shutdown_adapter brings the link(s) down.

Modify the GPIO pins only on the Base-T cards and even there drive all
of them low instead of putting them in hi-z state. For the rest (this
is the common case), directly power off the PLLs of the high speed
serdes. This is the simplest method that does not involve or conflict
with the firmware but still works with all T4-T6 cards regardless of
what's plugged into the port.

This fixes a problem where the peer wouldn't always see a link down if
it is connected to the device using a -CR4 copper cable.

MFC after: 3 weeks
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.26.2.0.

The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."

Version : 1.26.2.0
Date : 09/24/2021
==================

cxgbe(4): Update firmwares to 1.26.2.0.

The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."

Version : 1.26.2.0
Date : 09/24/2021
====================

FIXES
-----

BASE:
- Added support for SFP+ RJ45 (0x1C).
- Fixing backward compatibility issue with older drivers when multiple
speeds are passed to firmware.

OFLD:
- Do not touch tp_plen_max if driver is supplying tp_plen_max. This
fixes a connection reset issue in iscsi.

ENHANCEMENTS
------------

BASE:
- Firmware header modified to add firmware binary signature.

MFC after: 1 month
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.26.0.0.

Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.

Fixes
-----

cxgbe(4): Update firmwares to 1.26.0.0.

Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.

Fixes
-----

BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.

Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.25.6.0.

Changes since 1.25.0.0 are listed here. This list comes from the
Release Notes for the "Chelsio Unified Wire v3.14.0.3 for Linux"
release dated 2021-05-21.

cxgbe(4): Update firmwares to 1.25.6.0.

Changes since 1.25.0.0 are listed here. This list comes from the
Release Notes for the "Chelsio Unified Wire v3.14.0.3 for Linux"
release dated 2021-05-21.

Fixes
-----

BASE:
- Fixed Back to back T6 100G-CR4 link coming up with NO FEC sometimes.
- [T5] Try to bring up link in 1G speed if link doesn't come up on 10G.
- Fixed a bug to not allow BaseR fec in 100G speed.
- Fixed linkup issues on BT adapter in 1G and 100M speed.
- Fixed an issue to allow driver to send VI_ENABLE multiple times (once
with rx disable and then later rx enable).
- Fixed rate limiting not working on class number 16 to 30.
- Fixed backward compatibility issue in port type interpretation with vpd
version 0x80.

ETH:
- Fixed a case when firmware failed to deliver NIC WR completion to host.
- No rate limit support for WR ETH_TX_PKTS2 due to performance reasons.

OFLD
- Fixed a connection hang in SO adapters when tp_plen_max (set by driver)
is more than the window size.
- Added fw_filter_vnic_mode to firmware API file (t4fw_interface.h)
- Use correct rx channel in coprocessor crypto completion (CPL_FW6_PLD). This
was causing out of order completion to host.

FOiSCSI
- Fixed a crash due to unaligned access of ipv6 address.
- Fixed a crash during lun reset.

Enhancements
------------

ETH:
- Rate limiting support added for encapsulated (vxlan, nvgre, geneve) NIC TCP
packets.

OFLD:
- More than 128 SGLs supported in FW_RI_FR_NSMR_WR. Now, more than 16GB
(upto 64GB) of PBLs can be written with single FW_RI_FR_NSMR_WR.

Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Use firmware commands to get/set filter configuration.

1. Query the firmware for filter mode, mask, and related ingress config
instead of trying to figure them out from hardware registe

cxgbe(4): Use firmware commands to get/set filter configuration.

1. Query the firmware for filter mode, mask, and related ingress config
instead of trying to figure them out from hardware registers. Read
configuration from the registers only when the firmware does not
support this query.

2. Use the firmware to set the filter mode. This is the correct way to
do it and is more flexible as well. The filter mode (and associated
ingress config) can now be changed any time it is safe to do so.

The user can specify a subset of a valid mode and the driver will
enable enough bits to make sure that the mode is maxed out -- that
is, it is not possible to set another bit without exceeding the
total width for optional filter fields. This is a hardware
requirement that was not enforced by the driver previously.

MFC after: 2 weeks
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update firmwares to 1.25.0.40.

This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.

Obtained from: Chelsio Communications
MFC after: 1 week
Sp

cxgbe(4): Update firmwares to 1.25.0.40.

This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.

Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update T4/5/6 firmwares to 1.25.0.0.

Obtained from: Chelsio Communications
MFC after: 3 days
Sponsored by: Chelsio Communications

Merge ^/head r357662 through r357854.

cxgbe(4): Update T4/5/6 firmwares to 1.24.12.0.

Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications

cxgbe(4): Update T4/5/6 firmwares to 1.24.11.0.

These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.

Note that the firmwares are not uuencoded any more.

MFH: 1 month
Sponsore

cxgbe(4): Update T4/5/6 firmwares to 1.24.11.0.

These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.

Note that the firmwares are not uuencoded any more.

MFH: 1 month
Sponsored by: Chelsio Communications

show more ...

cxgbe(4): Update the firmware interface header.

This allows the driver to be updated for the next firmware without
waiting for it to be released.

MFC after: 2 weeks
Sponsored by: Chelsio Communicat

cxgbe(4): Update the firmware interface header.

This allows the driver to be updated for the next firmware without
waiting for it to be released.

MFC after: 2 weeks
Sponsored by: Chelsio Communications

show more ...

MFHead @345353

cxgbe(4): Treat the viid as an opaque identifier.

Recent firmwares prefer to use a different format for viid internally
and this change allows them to do so.

MFC after: 1 week
Sponsored by: Chelsio

cxgbe(4): Treat the viid as an opaque identifier.

Recent firmwares prefer to use a different format for viid internally
and this change allows them to do so.

MFC after: 1 week
Sponsored by: Chelsio Communications

show more ...

MFHead@r345275

cxgbe(4): Update T4/5/6 firmwares to 1.23.0.0.

Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications

Merge ^/head r340427 through r340868.

cxgbe(4): Update T4/5/6 firmwares to 1.22.0.3.

Obtained from: Chelsio Communications
MFC after: 2 months
Sponsored by: Chelsio Communications

cxgbe(4): Update all firmwares to 1.19.1.0.

These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.

T6 Firmware
=========================================

cxgbe(4): Update all firmwares to 1.19.1.0.

These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.

T6 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================

Fixes
-----

BASE:
- Fixed traffic stall when rate-limit is modified while running traffic.
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.

ETH:
- Exit Auto-Negotiation if we don't receive base page from peer within 10s.
This fixes some cases where in we keep on restarting auto negotiation without
ever exiting, resulting in link failure.
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.

OFLD:
- Kernel and user mode NVMEoF performance enhancements.

FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.

================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================

Fixes
-----

BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
- FW_PARAMS_CMD processes all the valaid paramaters and returns value 0UL for
any unknown parameter.

OFLD:
- Fixes connection failure during SRQ reuse.
- Fixes incorrect cqe in case of WRITE with immediate operation.

FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.

FOFCoE:
- Fixes a fw hang while creating NPIV.

Enhancements
------------

ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.

================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================

Fixes
-----

BASE:
- Fixed Rate limiting not working for 101Mbps<=rate limit<=163Mbps range.
- Fixed starting more than 32 VMs on PF4 causing firmware hang.

ETH:
- Fixed link failure due to FEC mismatch with optics.
- Fixed link failure with link toggle stress tests.
- Only BaseR FEC is supported for 50G.
- Fixed a bug in next page handling which sometimes causes link down.
- Fixed port down due to failre to read eeprom contents of some modules.
- Fixed a bug causing adapter to fail with spider configuration.

FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.

Enhancements
------------

BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).

ETH:
- Added support for user to contol pause negotiation during auto negotiation.

FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.

================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================

FIXES
-----

BASE:
- Fixed an FLR failure during simulteneous power up of VM.
- Fixed an issue in vlan acl which was limiting vlan range to 1024.

ETH:
- Enabled RS-FEC for 25G active copper cable and 25GBASE-SR.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.

OFLD
- Fixed rdma connection cleanup in SO adpater.
- Fixed rdma connections during read invalidate.
- Fixed the crash when invalid BW rate is passed to fw.
- Fixed the traffic hang when BW allocation is changed from switch during traffic.

FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.

ENHANCEMENTS
------------

BASE:
- Added support for 248 VFs.
- Added fw driver periodic calibration for MC.

ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).

OFLD:
- Inline IPSec support added (flag F_FW_ULPTX_WR_DATA indicates the inline
IPSec WR).
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to

T5 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================

Fixes
-----

BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.

ETH:
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.

OFLD:
- Fixes an issue where fw hangs if max traffic rate passed is 0.

FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.

================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================

Fixes
-----

BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.

ETH:
- Pad the Ethernet packets of size less than 64B with zeros. This fixes the
incorrect checksum generation of packets less then 64B.

FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.

FOFCoE:
- Fixes a fw hang while creating NPIV.

Enhancements
------------

ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.

================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================

Fixes
-----

BASE:
- Fixed starting more than 32 VMs on PF4 causing firmware hang.

FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.

Enhancements
------------

BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).

ETH:
- Added support for user to contol pause negotiation during auto negotiation.

FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.

================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================

FIXES
-----

BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.

ETH:
- Corrected lane inversion logic.
- Fixed improper LED behavior in T580 cards.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.

OFLD
- Fixed rdma connections during read invalidate.

FOiSCSI:
- Fixed a connections hang when link is toggled frequently.

FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.

ENHANCEMENTS
------------

BASE:
- Added support for 124 VFs.

ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).

OFLD:
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
optimize NVMEoF write.

T4 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================

Fixes
-----

BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.

FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.

================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================

Fixes
-----

BASE:
- Added a new paramter iqtype to FW_IQ_CMD to identify the ingress NIC or
offload queues. This fixes an issue where driver was receiving interrupt with
no new messages in queue.

FOFCoE:
- Fixes a fw hang while creating NPIV.

Enhancements
------------

ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.

================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================

Enhancements
------------

BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).

================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================

FIXES
-----

BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.

MFC after: 3 days
Sponsored by: Chelsio Communications

show more ...