#
fdafd315 |
| 24-Nov-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Automated cleanup of cdefs and other formatting
Apply the following automated changes to try to eliminate no-longer-needed sys/cdefs.h includes as well as now-empty blank lines in a row.
Remov
sys: Automated cleanup of cdefs and other formatting
Apply the following automated changes to try to eliminate no-longer-needed sys/cdefs.h includes as well as now-empty blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/ Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/ Remove /\n+#if.*\n#endif.*\n+/ Remove /^#if.*\n#endif.*\n/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/ Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
show more ...
|
Revision tags: release/14.0.0 |
|
#
685dc743 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c pattern
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
4d846d26 |
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
show more ...
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0 |
|
#
2d51cd13 |
| 10-May-2022 |
John Baldwin <jhb@FreeBSD.org> |
Remove unused cfi_diskclass.
|
Revision tags: release/12.3.0, release/13.0.0, release/12.2.0 |
|
#
09795891 |
| 02-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
cfi: clean up empty lines in .c and .h files
|
Revision tags: release/11.4.0 |
|
#
bc02c18c |
| 07-Feb-2020 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r357408 through r357661.
|
#
d176b803 |
| 07-Feb-2020 |
Scott Long <scottl@FreeBSD.org> |
Ever since the block layer expanded its command syntax beyond just BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in drivers when the driver doesn't support a particular command.
Ever since the block layer expanded its command syntax beyond just BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in drivers when the driver doesn't support a particular command. Do a sweep and fix that.
Reported by: imp
show more ...
|
Revision tags: release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
#
718cf2cc |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task.
The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
show more ...
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0 |
|
#
0bfd163f |
| 18-Oct-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge head r233826 through r256722.
|
#
1ccca3b5 |
| 10-Oct-2013 |
Alan Somers <asomers@FreeBSD.org> |
IFC @256277
Approved by: ken (mentor)
|
Revision tags: release/9.2.0 |
|
#
ef90af83 |
| 20-Sep-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r255692
Comment out IA32_MISC_ENABLE MSR access - this doesn't exist on AMD. Need to sort out how arch-specific MSRs will be handled.
|
#
0fbf163e |
| 06-Sep-2013 |
Mark Murray <markm@FreeBSD.org> |
MFC
|
#
d1d01586 |
| 05-Sep-2013 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge from head
|
#
46ed9e49 |
| 04-Sep-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r255209
|
#
f4358134 |
| 04-Sep-2013 |
Brooks Davis <brooks@FreeBSD.org> |
MFP4 217312, 222008, 222052, 222053, 222673, 231484, 231491, 231565, 570643
Rework the timeout code to use actual time rather than a DELAY() loop and to use both typical and maximum to allow logging
MFP4 217312, 222008, 222052, 222053, 222673, 231484, 231491, 231565, 570643
Rework the timeout code to use actual time rather than a DELAY() loop and to use both typical and maximum to allow logging of timeout failures. Also correct the erase timeout, it is specified in milliseconds not microseconds like the other timeouts. Do not invoke DELAY() between status queries as this adds significant latency which in turn reduced write performance substantially.
Sanity check timeout values from the hardware.
Implement support for buffered writes (only enabled on Intel/Sharp parts for now). This yields an order of magnitude speedup on the 64MB Intel StrataFlash parts we use.
When making a copy of the block to modify, also keep a clean copy around until we are ready to commit the block and use it to avoid unnecessary erases. In the non-buffer write case, also use it to avoid unnecessary writes when the block has not been erased. This yields a significant speedup when doing things like zeroing a block.
Sponsored by: DARPA, AFRL Reviewed by: imp (previous version)
show more ...
|
#
40f65a4d |
| 07-Aug-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r254014
|
#
552311f4 |
| 17-Jul-2013 |
Xin LI <delphij@FreeBSD.org> |
IFC @253398
|
#
cfe30d02 |
| 19-Jun-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge fresh head.
|
#
ce4bc82d |
| 12-Jun-2013 |
Alexander Motin <mav@FreeBSD.org> |
Use direct custom implementations instead of g_handleattr() for CFI and NAND d_getattr(). Since these drivers use disk(9) KPI and not directly GEOM, use of that function means KPI layering violation
Use direct custom implementations instead of g_handleattr() for CFI and NAND d_getattr(). Since these drivers use disk(9) KPI and not directly GEOM, use of that function means KPI layering violation, causing extra g_io_deliver() call for the request.
show more ...
|
Revision tags: release/8.4.0 |
|
#
444e7801 |
| 30-May-2013 |
Brooks Davis <brooks@FreeBSD.org> |
MFP4 @222836
Add support for partitioning CFI disks from FDT using geom_flashmap.
Sponsored by: DARPA, AFRL
|
Revision tags: release/9.1.0 |
|
#
6a068746 |
| 15-May-2012 |
Alexander Motin <mav@FreeBSD.org> |
MFC
|
#
38f1b189 |
| 26-Apr-2012 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r234692
sys/amd64/include/cpufunc.h sys/amd64/include/fpu.h sys/amd64/amd64/fpu.c sys/amd64/vmm/vmm.c
- Add API to allow vmm FPU state init/save/restore.
FP stuff discussed with: kib
|
Revision tags: release/8.3.0_cvs, release/8.3.0 |
|
#
8833b15f |
| 03-Apr-2012 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge head r232686 through r233825 into projects/pf/head.
|
#
9c1f1330 |
| 27-Mar-2012 |
Jayachandran C. <jchandra@FreeBSD.org> |
CFI fixes for big endian archs.
The flash commands and responses are little-endian and have to be byte swapped on big-endian systems. However the raw read of data need not be swapped.
Make the cfi
CFI fixes for big endian archs.
The flash commands and responses are little-endian and have to be byte swapped on big-endian systems. However the raw read of data need not be swapped.
Make the cfi_read and cfi_write do the swapping, and provide a cfi_read_raw which does not byte swap for reading data from flash.
show more ...
|
Revision tags: release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0 |
|
#
10b3b545 |
| 17-Sep-2009 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Merge from head
|