sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

bhnd: clean up empty lines in .c and .h files

SPDX: license IDs for some ISC-related files.

Merge ^/head r325999 through r326131.

bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4)

The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not r

bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4)

The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.

Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708

show more ...

Merge ^/head r318964 through r319164.

[mips] [bhnd] Support of old PMU for BMIPS and siba SoC

- Fix typo of PLL Type 4
- Don't panic of frequency getters

Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https:

[mips] [bhnd] Support of old PMU for BMIPS and siba SoC

- Fix typo of PLL Type 4
- Don't panic of frequency getters

Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10967

show more ...

Integrate BCM4706 PMU (rev6) support, derived from the ISC-licensed Broadcom
sbchipc.h and hndpmu.c sources included in the RT-N16 and later firmware
source drops.

Approved by: adrian (mentor, impli

Integrate BCM4706 PMU (rev6) support, derived from the ISC-licensed Broadcom
sbchipc.h and hndpmu.c sources included in the RT-N16 and later firmware
source drops.

Approved by: adrian (mentor, implicit)

show more ...

Merge ^/head r305361 through r305389.

Migrate bhndb(4) to the new bhnd_erom API.

Adds support for probing and initializing bhndb(4) bridge state using
the bhnd_erom API, ensuring that full bridge configuration is available
*prior* to ac

Migrate bhndb(4) to the new bhnd_erom API.

Adds support for probing and initializing bhndb(4) bridge state using
the bhnd_erom API, ensuring that full bridge configuration is available
*prior* to actually attaching and enumerating the bhnd(4) child device,
allowing us to safely allocate bus-level agent/device resources during
bhnd(4) bus enumeration.

- Add a bhnd_erom_probe() method usable by bhndb(4). This is an analogue
to the existing bhnd_erom_probe_static() method, and allows the bhndb
bridge to discover the best available erom parser class prior to newbus
probing of its children.
- Add support for supplying identification hints when probing erom
devices. This is required on early EXTIF-only chipsets, where chip
identification registers are not available.
- Migrate bhndb over to the new bhnd_erom API, using bhnd_core_info
records rather than bridged bhnd(4) device_t references to determine
the bridged chipsets' capability/bridge configuration.
- The bhndb parent (e.g. if_bwn) is now required to supply a hardware
priority table to the bridge. The default table is currently sufficient
for our supported devices.
- Drop the two-pass attach approach we used for compatibility with bhndb(4) in
the bhnd(4) bus drivers, and instead perform bus enumeration immediately,
and allocate bridged per-child bus-level resources during that enumeration.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7768

show more ...

MFhead @ r305013

Merge ^/head r304700 through r304884.

[mips/broadcom]: Replace static frequency table with generic PMU clock
handling.


- Extended PWRCTL/PMU APIs to support querying clock frequency during very
early boot, prior to bus attach.
- Impl

[mips/broadcom]: Replace static frequency table with generic PMU clock
handling.


- Extended PWRCTL/PMU APIs to support querying clock frequency during very
early boot, prior to bus attach.
- Implement generic PMU-based calculation of UART rclk values.
- Replaced use of static frequency tables (bcm_socinfo) with
runtime-determined values.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7552

show more ...

bhnd(4): Initial PMU/PWRCTL power and clock management support.


- Added bhnd_pmu driver implementations for PMU and PWRCTL chipsets,
derived from Broadcom's ISC-licensed HND code.
- Added bhnd bu

bhnd(4): Initial PMU/PWRCTL power and clock management support.


- Added bhnd_pmu driver implementations for PMU and PWRCTL chipsets,
derived from Broadcom's ISC-licensed HND code.
- Added bhnd bus-level support for routing per-core clock and resource
power requests to the PMU device.
- Lift ChipCommon support out into the bhnd module, dropping
bhnd_chipc.

Reviewed by: mizhka
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7492

show more ...

[mips/broadcom] Generic platform_reset() support.

This adds support for performing platform_reset() on all supported
devices, using early boot enumeration of chipc capabilities and
available cores.

[mips/broadcom] Generic platform_reset() support.

This adds support for performing platform_reset() on all supported
devices, using early boot enumeration of chipc capabilities and
available cores.


- Added Broadcom-specific MIPS CP0 register definitions used by
BCM4785-specific reset handling.
- Added a bcm_platform structure for tracking chipc/pmu/cfe platform
data.
- Extended the BCMA EROM API to support early boot lookup of core info
(including port/region mappings).
- Extended platform_reset() to support PMU, PMU+AOB, and non-PMU
devices.

Reviewed by: mizhka
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7539

show more ...

bhnd(4): Perform explicit chipc child enumeration.

Replaces use of DEVICE_IDENTIFY with explicit enumeration of chipc
child devices using the chipc capability structure.

This is a precursor to PMU

bhnd(4): Perform explicit chipc child enumeration.

Replaces use of DEVICE_IDENTIFY with explicit enumeration of chipc
child devices using the chipc capability structure.

This is a precursor to PMU support, which requires more complex resource
assignment handling than achievable with the static device name-based
hints table.

Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Approved by: re (gjb), adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6896

show more ...

bhnd(4): support IPX OTP NVRAM/SPROM data source

Add support for fetching SPROM data from OTP on chipsets with an
IPX OTP controller (including the BCM43225).

This integrates the NVRAM data source

bhnd(4): support IPX OTP NVRAM/SPROM data source

Add support for fetching SPROM data from OTP on chipsets with an
IPX OTP controller (including the BCM43225).

This integrates the NVRAM data source into the chipc_caps capability
structure, and adds a sprom_offset field that can be used with OTP
to locate the SPROM image data (found within the general use
region, H/W subregion).

This also removes one of two duplicate parse error messages reported by
both the bhnd_sprom driver and the underlying SPROM parsing API.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6729

show more ...

Fix several MIPS/BCM-blocking bugs in bhnd(4) chipc

- Correct IRQ lines for UART (to fix IRQ lookup in future)
- Check device unit in resource assignment during chipc_add_child
- If chipc hint->size

Fix several MIPS/BCM-blocking bugs in bhnd(4) chipc

- Correct IRQ lines for UART (to fix IRQ lookup in future)
- Check device unit in resource assignment during chipc_add_child
- If chipc hint->size is RM_MAX_END, resource end should be same as window end
- Clear reference from resource list entry to resource in case of resource release
- Add CHIPC_GET_CAPS implementation
- Correct chipc flash constants (to be unshifted)
- Default implementation of get_attach_type should iterate over device tree
- Add default implementation for BHND_CHIPC_GET_CAPS usable by chipc grandchildren

Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6584

show more ...

[bhnd] Integrate bhnd_chipc's BUS_ADD_CHILD() with a child resource mapping table.

This adds support for automatically configuring bhnd_chipc bus children
with associated resources, using an interna

[bhnd] Integrate bhnd_chipc's BUS_ADD_CHILD() with a child resource mapping table.

This adds support for automatically configuring bhnd_chipc bus children
with associated resources, using an internal 'hints' table based directly
on Michael Zhilin's chipc resource mapping work.

The bhnd_sprom_chipc driver has been converted to use DEVICE_IDENTIFY()
with the new resource table.

This should be nearly drop-in compatible with the child device drivers
in D6250.

Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6525

show more ...

[bhnd] Implement pass-through resource management for ChipCommon.

This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of

[bhnd] Implement pass-through resource management for ChipCommon.

This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of
bhnd_chipc that rely on access to a subset of the device register space
that bhnd_chipc itself must also allocate.

We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY
wasn't limited to use with allocations at the same size/offset.

As a work-around, I implemented something similar to vga_pci.c, which
implements similar reference counting of of PCI BAR resources for its
children.

With these changes, chipc will use reference counting of SYS_RES_MEMORY
allocation/activation requests, to decide when to allocate/activate/
deactivate/release resources from the parent bhnd(4) bus.

The requesting child device is allocated a new resource from chipc's
rman, pointing to (possibly a subregion of) the refcounted bhnd resources
allocated by chipc.

Other resource types are just passed directly to the parent bhnd bus;
RF_SHAREABLE works just fine with IRQs.

I also lifted the SPROM device code out into a common driver, since this
now allows me to hang simple subclasses off of a common driver off of both
bhndb_pci and bhnd_chipc.

Tested:

* (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still
attaches and can be queried.

Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: mizkha@gmail.com
Differential Revision: https://reviews.freebsd.org/D6471

show more ...

[bhnd] Initial bhnd(4) SPROM/NVRAM support.

This adds support for the NVRAM handling and the basic SPROM
hardware used on siba(4) and bcma(4) devices, including:

* SPROM directly attached to the PC

[bhnd] Initial bhnd(4) SPROM/NVRAM support.

This adds support for the NVRAM handling and the basic SPROM
hardware used on siba(4) and bcma(4) devices, including:

* SPROM directly attached to the PCI core, accessible via PCI configuration
space.
* SPROM attached to later ChipCommon cores.
* SPROM variables vended from the parent SoC bus (e.g. via a directly-attached
flash device).

Additional improvements to the NVRAM/SPROM interface will
be required, but this changeset stands alone as working
checkpoint.

Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Differential Revision: https://reviews.freebsd.org/D6196

show more ...

Merge ^/head r296007 through r296368.

MFH

Sponsored by: The FreeBSD Foundation

Bring over the initial rewrite of the broadcom bus support found in their
SoCs and various chips (including, famously, their wifi chips.)

This is "just" (all 20,000 lines of it) code to enumerate th

Bring over the initial rewrite of the broadcom bus support found in their
SoCs and various chips (including, famously, their wifi chips.)

This is "just" (all 20,000 lines of it) code to enumerate the various
versions of busses inside these devices, including the PCI bridge and
the direct SIBA bridge found in MIPS chips.

It also includes shared code for some bus operations (suspend, resume, etc);
EEPROM/SROM/etc parsing and other things that are shared between chips.

Eventually this'll replace the code that bwi/bwn uses for the internal
bus, as well as some apparently upcoming mips74k broadcom SoC support
which uses bwn!

Thanks to Landon Fuller <landonf@landonf.org> for all this work!

Obtained from: https://github.com/landonf/freebsd/compare/user/landonf/bcm4331-CURRENT

show more ...