|
Revision tags: release/14.0.0 |
|
| #
95ee2897 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
6e778a7e |
| 08-Dec-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
SPDX: license IDs for some ISC-related files.
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0 |
|
| #
a5615c90 |
| 28-Jun-2011 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r222830
|
| #
7fcdc9a2 |
| 26-May-2011 |
Attilio Rao <attilio@FreeBSD.org> |
MFC
|
| #
4551052d |
| 26-May-2011 |
Adrian Chadd <adrian@FreeBSD.org> |
Flesh out the TX power calibration for the AR9287.
I'm assuming for now that the AR9287 is only open-loop TX power control
(as mine is) so I've hard-coded the attach path to fail if the NIC is
not o
Flesh out the TX power calibration for the AR9287.
I'm assuming for now that the AR9287 is only open-loop TX power control
(as mine is) so I've hard-coded the attach path to fail if the NIC is
not open-loop.
This greatly simplifies the TX calibration path and the amount of code
which needs to be ported over.
This still isn't complete - the rate calculation code still needs to be
ported and it all needs to be glued together.
Obtained from: Linux ath9k
show more ...
|
| #
d8daa2e3 |
| 26-May-2011 |
Adrian Chadd <adrian@FreeBSD.org> |
Bring over my AR9287 work in progress.
It isn't linked into the build because it's missing the TX power
and PDADC programming code.
This code is mostly based on the ath9k codebase, compared against
Bring over my AR9287 work in progress.
It isn't linked into the build because it's missing the TX power
and PDADC programming code.
This code is mostly based on the ath9k codebase, compared against
the Atheros codebase as appropriate.
What's implemented:
* probe/attach
* EEPROM board value programming
* RX initial calibration
* radio channel programming
* general MAC / baseband setup
* async fifo setup
* open-loop tx power calibration
What's missing before it can be enabled by default:
* TX power / calibration setting code
* closed-loop tx power calibration routines
* TSF2 handling
* generic timer support from ath9k
Obtained from: Atheros, ath9k
show more ...
|