sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

MFH

Sponsored by: Rubicon Communications, LLC (netgate.com)

Merge ^/head r363583 through r363738.

Move Ti AM335x to dev/extres/clk framework.

Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is

Move Ti AM335x to dev/extres/clk framework.

Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is (due to the size of the patch) only the initial (minimum) version.
It will be updated/expanded with a subsequent set of particular patches.

This patch is also not tested on OMAP4 based boards (BeagleBone),
so all possible issues should be (and will be) fixed by ASAP once
identified.

Submited by: Oskar Holmlund (oskar.holmlund@ohdata.se)
Differential Revision: https://reviews.freebsd.org/D25118

show more ...

sys/arm: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/arm: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFH

Sponsored by: The FreeBSD Foundation

Add the SPI driver for am335x.

This driver works in PIO mode for now, interrupts are available only when
FIFO is enabled. The FIFO cannot be used with arbitrary sizes which defeat
its general use.

Add the SPI driver for am335x.

This driver works in PIO mode for now, interrupts are available only when
FIFO is enabled. The FIFO cannot be used with arbitrary sizes which defeat
its general use.

At some point we can add DMA transfers where the FIFO can be more useful.

Tested on uBMC (microBMC) and BBB.

Sponsored by: Rubicon Communications (Netgate)

show more ...

Catch up with HEAD (r280229-r284686).

Merge ^/head r284188 through r284643.

Merge from head @274131

- Add clk_set_source_freq field to struct ti_clock_dev so clock device
consumers can configure clock frequency
- Add ti_prcm_clk_set_source_freq wrapper for clk_set_source_freq
- Add am335x_clk_se

- Add clk_set_source_freq field to struct ti_clock_dev so clock device
consumers can configure clock frequency
- Add ti_prcm_clk_set_source_freq wrapper for clk_set_source_freq
- Add am335x_clk_set_arm_disp_freq function to control pixel clock
frequency for LCD and HDMI output. Both of them are sensitive
to frequency skews and we need to get pixel clock matching requested
frequency as close to possible

show more ...

MFH: r282615-r283655

Sponsored by: The FreeBSD Foundation

Merge sync of head

Switch TI platform support code from using FreeBSD's custom-baked DTS
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays

Switch TI platform support code from using FreeBSD's custom-baked DTS
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).

Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update

GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3

On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is

Differential Revision: https://reviews.freebsd.org/D2146
Reviewed by: rpaulo, ian, Michal Meloun, Svatopluk Kraus

show more ...

MFhead @ r277403

Reintegrate head: r274132-r277384

Sponsored by: The FreeBSD Foundation

Reintegrate head revisions r273096-r277147

Sponsored by: The FreeBSD Foundation

Add support to turn off Beaglebone with poweroff(8) or shutdown(8) -p.

To cut off the power we need to start the shutdown sequence by writing
the OFF bit on PMIC.

Once the PMIC is programmed the So

Add support to turn off Beaglebone with poweroff(8) or shutdown(8) -p.

To cut off the power we need to start the shutdown sequence by writing
the OFF bit on PMIC.

Once the PMIC is programmed the SoC needs to toggle the PMIC_PWR_ENABLE
pin when it is ready for the PMIC to cut off the power. This is done by
triggering the ALARM2 interrupt on SoC RTC.

The RTC driver only works in power management mode which means it won't
provide any kind of time keeping functionality. It only implements a way
to trigger the ALARM2 interrupt when requested.

Differential Revision: https://reviews.freebsd.org/D1489
Reviewed by: rpaulo
MFC after: 2 weeks

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767

Merge head up to r263906.

Adds the ADC driver for TI AM3xxx SoC family.

The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.

The driver allows the setup of ADC clock, samples average and op

Adds the ADC driver for TI AM3xxx SoC family.

The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.

The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).

The TSC_ADC module is set in the general purpose mode (no touchscreen
support).

Tested on Beaglebone-black.

Written based on AM335x TRM.

Reviewed by: rpaulo
Approved by: adrian (mentor)
Tested by: me, Brian J. McGovern, Sulev-Madis Silber (ketas)

show more ...

Merge head r233826 through r256722.