sys: Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

arm: ti: Rename video related devices

device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm TI devices to some proper name.

Sponsored by: Beckhoff Automation Gmb

arm: ti: Rename video related devices

device 'hdmi' is too generic (and will be used later in a new device) so rename
the arm TI devices to some proper name.

Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39119

show more ...

MFH

Sponsored by: Rubicon Communications, LLC (netgate.com)

Merge ^/head r363583 through r363738.

Move Ti AM335x to dev/extres/clk framework.

Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is

Move Ti AM335x to dev/extres/clk framework.

Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is (due to the size of the patch) only the initial (minimum) version.
It will be updated/expanded with a subsequent set of particular patches.

This patch is also not tested on OMAP4 based boards (BeagleBone),
so all possible issues should be (and will be) fixed by ASAP once
identified.

Submited by: Oskar Holmlund (oskar.holmlund@ohdata.se)
Differential Revision: https://reviews.freebsd.org/D25118

show more ...

The am335x_ehrpwm driver now requires the pwmbus_if interface, add it.

Merge ^/head r305087 through r305219.

MFhead @ r305170

Add a driver for the AM335x bandgap sensor, an on-die temperature sensor
as part of the AM335x control module extension.

TI says that the bandgap sensor is not very accurate on AM335x, but in our
te

Add a driver for the AM335x bandgap sensor, an on-die temperature sensor
as part of the AM335x control module extension.

TI says that the bandgap sensor is not very accurate on AM335x, but in our
tests it seems to be a good reference for the SoC temperature.

TI details:
http://processors.wiki.ti.com/index.php/AM335x_Thermal_Considerations#Measuring_Case_Temperature

Sponsored by: Rubicon Communications, LLC (Netgate)

show more ...

MFH r289384-r293170

Sponsored by: The FreeBSD Foundation

Catch up with head.

Move hdmi_if.m to files.arm so other kernel configs can use it.

Catch up with head (r291075).

hdmi_if.m will be reused by iMX6 IPU code so move it to arm/arm

Merge from head

Sponsored by: Gandi.net

Finish merging from head, messed up in previous attempt

Merge from HEAD

Merge ^/head r286697 through r286857.

Catch up with head, primarily for the 1.14.4.0 firmware.

Add a new PPS driver for AM335x (beaglebone) timer hardware. This can be
used as a module or compiled-in.

Catch up with HEAD (r280229-r284686).

Merge ^/head r284188 through r284643.

Merge from head @274131

Add HDMI support to Beaglebone Black:

- Add driver for TDA19988 HDMI framer
- Add simple interface to communicate with HDMI sink: read EDID and set videomode
- Add event-based API to notify LCD cont

Add HDMI support to Beaglebone Black:

- Add driver for TDA19988 HDMI framer
- Add simple interface to communicate with HDMI sink: read EDID and set videomode
- Add event-based API to notify LCD controller when HDMI sink is available
- Add HDMI framer node and add refernce to it to lcdc node. This part of
DTS tree is custom and does not match Linux DTS because Linux uses
combination of pseudo-node in DTS and hardcoded driver information
that does not map to our model.

show more ...

MFH: r282615-r283655

Sponsored by: The FreeBSD Foundation