uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIO

uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIOCDRAIN for UARTs with TX FIFOs. This proved to be sufficient for
fixing the regression reported. So in light of the release cycle of
FreeBSD 10.3, I decided that this change was be good enough for the
time being and opted to go with the smallest possible yet generic
(for all UARTs driven by uart(4)) solution addressing the problem at
hand.

However, at least for the NS8250-class the above isn't a complete
fix as these UARTs only trigger an interrupt when the TX FIFO became
empty. At this point, there still can be an outstanding character
left in the transmit shift register as indicated via the LSR. Thus,
this change adds the 3rd (besides the tty(4) and generic uart(4) bits)
part I had in my tree ever since, adding a uart_txbusy method to be
queried in addition for tsw_busy and hooking it up as appropriate
for the NS8250-class.

As it turns out, the exact equivalent of this 3rd part later on was
implemented for uftdi(4) in 9ad221a5.

While at it, explain the rational behind the deliberately missing
locking in uart_tty_busy() (also applying to the generic sc_txbusy
testing already present).

show more ...

hwreset: Move reset code in dev/hwreset

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a

hwreset: Move reset code in dev/hwreset

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43192

show more ...

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

Remove unused uart_devclass.

ARM: Enhance common Nvidia Tegra drivers by support for Tegra210 SoC.

MFC after: 4 weeks

arm: clean up empty lines in .c and .h files

Fix grabbing of tegra uart.
An attempt to write to FCR register may corrupt transmit FIFO,
so we should wait for the FIFO to be empty before we can modify it.

MFC after: 1 week

Merge ^/head r338026 through r338297, and resolve conflicts.

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to wor

add snps IP uart support / genaralize UART

This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)

Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432

show more ...

Merge ^/head r314270 through r314419.

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...

Merge ^/head r308491 through r308841.

Stop including fdt_common.h from the arm code when it's unneeded.

Sponsored by: ABT Systems Ltd

EXTRES: Add OF node as argument to all <foo>_get_by_ofw_<bar>() functions.
In some cases, the driver must handle given properties located in
specific OF subnode. Instead of creating duplicate set of

EXTRES: Add OF node as argument to all <foo>_get_by_ofw_<bar>() functions.
In some cases, the driver must handle given properties located in
specific OF subnode. Instead of creating duplicate set of function, add
'node' as argument to existing functions, defaulting it to device OF node.

MFC after: 3 weeks

show more ...

MFH

Sponsored by: The FreeBSD Foundation

TEGRA: Fixes for UART driver:
- add mising 'or' in tegra_uart_attach()
Pointed by: kan
- fix indentation of tegra_softc
- remove forgoten debug printf

Import basic support for Nvidia Jetson TK1 board and tegra124 SoC.
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.

Note: The PCIe d

Import basic support for Nvidia Jetson TK1 board and tegra124 SoC.
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.

Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.

show more ...