sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

vmm: Lookup vcpu pointers in vmmdev_ioctl.

Centralize mapping vCPU IDs to struct vcpu objects in vmmdev_ioctl and
pass vcpu pointers to the routines in vmm.c. For operations that want
to perform an

vmm: Lookup vcpu pointers in vmmdev_ioctl.

Centralize mapping vCPU IDs to struct vcpu objects in vmmdev_ioctl and
pass vcpu pointers to the routines in vmm.c. For operations that want
to perform an action on all vCPUs or on a single vCPU, pass pointers
to both the VM and the vCPU using a NULL vCPU pointer to request
global actions.

Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D37168

show more ...

vmm: Pass vcpu instead of vm and vcpuid to APIs used from CPU backends.

Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D37162

vmm: Use struct vcpu in the instruction emulation code.

This passes struct vcpu down in place of struct vm and and integer
vcpu index through the in-kernel instruction emulation code. To
minimize u

vmm: Use struct vcpu in the instruction emulation code.

This passes struct vcpu down in place of struct vm and and integer
vcpu index through the in-kernel instruction emulation code. To
minimize userland disruption, helper macros are used for the vCPU
arguments passed into and through the shared instruction emulation
code.

A few other APIs used by the instruction emulation code have also been
updated to accept struct vcpu in the kernel including
vm_get/set_register and vm_inject_fault.

Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D37161

show more ...

vmx: use C99 bool, not boolean_t

Bhyve's vmm is a self-contained modern component and thus a good
candidate for use of C99 types.

Reviewed by: jhb, kib, markj, Patrick Mooney
MFC after: 1 week
Spon

vmx: use C99 bool, not boolean_t

Bhyve's vmm is a self-contained modern component and thus a good
candidate for use of C99 types.

Reviewed by: jhb, kib, markj, Patrick Mooney
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21036

show more ...

sys/amd64: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - err

sys/amd64: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767

MFC @ r259635

This brings in the "-w" option from bhyve to ignore unknown MSRs.
It will make debugging Linux guests a bit easier.

Suggested by: Willem Jan Withagen (wjw at digiware nl)

Merge head up to r262222 (last merge was incomplete).

MFC @ r259205 in preparation for some SVM updates. (for real this time)

Roll back botched partial MFC :(

MFC @ r259205 in preparation for some SVM updates.

vlapic code restructuring to make it easy to support hardware-assist for APIC
emulation.

The vlapic initialization and cleanup is done via processor specific vmm_ops.
This will allow the VT-x/SVM mo

vlapic code restructuring to make it easy to support hardware-assist for APIC
emulation.

The vlapic initialization and cleanup is done via processor specific vmm_ops.
This will allow the VT-x/SVM modules to layer any hardware-assist for APIC
emulation or virtual interrupt delivery on top of the vlapic device model.

Add a parameter to 'vcpu_notify_event()' to distinguish between vlapic
interrupts versus other events (e.g. NMI). This provides an opportunity to
use hardware-assists like Posted Interrupts (VT-x) or doorbell MSR (SVM)
to deliver an interrupt to a guest without causing a VM-exit.

Get rid of lapic_pending_intr() and lapic_intr_accepted() and use the
vlapic_xxx() counterparts directly.

Associate an 'Apic Page' with each vcpu and reference it from the 'vlapic'.
The 'Apic Page' is intended to be referenced from the Intel VMCS as the
'virtual APIC page' or from the AMD VMCB as the 'vAPIC backing page'.

show more ...

Extend the support for local interrupts on the local APIC:
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command t

Extend the support for local interrupts on the local APIC:
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.

Reviewed by: neel (earlier version)

show more ...

Add an API to deliver message signalled interrupts to vcpus. This allows
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, f

Add an API to deliver message signalled interrupts to vcpus. This allows
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.

Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@

show more ...

Fix x2apic support in bhyve.

When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP. Th

Fix x2apic support in bhyve.

When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP. This gets SMP guests working again with x2APIC.

Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.

Reviewed by: grehan@

show more ...

Use callout(9) to drive the vlapic timer instead of clocking it on each VM exit.

This decouples the guest's 'hz' from the host's 'hz' setting. For e.g. it is
now possible to have a guest run at 'hz=

Use callout(9) to drive the vlapic timer instead of clocking it on each VM exit.

This decouples the guest's 'hz' from the host's 'hz' setting. For e.g. it is
now possible to have a guest run at 'hz=1000' while the host is at 'hz=100'.

Discussed with: grehan@
Tested by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)

show more ...

Add support for level triggered interrupt pins on the vioapic. Prior to this
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.

The vlap

Add support for level triggered interrupt pins on the vioapic. Prior to this
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.

The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.

The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.

Discussed with: grehan@

show more ...

Merge fresh head.

IFC @247348.

Sync with HEAD.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

show more ...