sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

vmm ppt: Remove unused vcpu arg from MSI setup handlers.

Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D37167

bhyve: support relocating fbuf and passthru data BARs

We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs

bhyve: support relocating fbuf and passthru data BARs

We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs is properly handled by the PCI emulation
code in general, but a few specific cases need additional support.
fbuf and passthru map additional objects into the guest physical
address space and so need to handle address updates. Here we add a
callback to emulated PCI devices to inform them of a BAR
configuration change. fbuf and passthru then watch for these BAR
changes and relocate the frame buffer memory segment and passthru
device mmio area respectively.

We also add new VM_MUNMAP_MEMSEG and VM_UNMAP_PPTDEV_MMIO ioctls
to vmm(4) to facilitate the unmapping needed for addres updates.

[1]: https://github.com/freebsd/uefi-edk2/pull/9/

Originally by: scottph
MFC After: 1 week
Sponsored by: Intel Corporation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D24066

show more ...

Honor the disabled setting for MSI-X interrupts for passthrough devices.

Add a new ioctl to disable all MSI-X interrupts for a PCI passthrough
device and invoke it if a write to the MSI-X capability

Honor the disabled setting for MSI-X interrupts for passthrough devices.

Add a new ioctl to disable all MSI-X interrupts for a PCI passthrough
device and invoke it if a write to the MSI-X capability registers
disables MSI-X. This avoids leaving MSI-X interrupts enabled on the
host if a guest device driver has disabled them (e.g. as part of
detaching a guest device driver).

This was found by Chelsio QA when testing that a Linux guest could
switch from MSI-X to MSI interrupts when using the cxgb4vf driver.

While here, explicitly fail requests to enable MSI on a passthrough
device if MSI-X is enabled and vice versa.

Reported by: Sony Arpita Das @ Chelsio
Reviewed by: grehan, markj
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27212

show more ...

vmx: use C99 bool, not boolean_t

Bhyve's vmm is a self-contained modern component and thus a good
candidate for use of C99 types.

Reviewed by: jhb, kib, markj, Patrick Mooney
MFC after: 1 week
Spon

vmx: use C99 bool, not boolean_t

Bhyve's vmm is a self-contained modern component and thus a good
candidate for use of C99 types.

Reviewed by: jhb, kib, markj, Patrick Mooney
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21036

show more ...

sys/amd64: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - err

sys/amd64: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767

MFC @ r259635

This brings in the "-w" option from bhyve to ignore unknown MSRs.
It will make debugging Linux guests a bit easier.

Suggested by: Willem Jan Withagen (wjw at digiware nl)

MFH: tracking commit

Sponsored by: The FreeBSD Foundation

Merge head up to r262222 (last merge was incomplete).

MFH@260988.

There is no need to initialize the IOMMU if no passthru devices have been
configured for bhyve to use.

Suggested by: grehan@

MFC @ r256071

This is the change where the bhyve_npt_pmap branch was
merged in to head.

The SVM changes to work with this will be in a follow-on
submit.

Add an API to deliver message signalled interrupts to vcpus. This allows
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, f

Add an API to deliver message signalled interrupts to vcpus. This allows
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.

Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@

show more ...

Merge head r233826 through r256722.

Merge head@256284

IFC @256277

Approved by: ken (mentor)

MFC - tracking commit

Merge projects/bhyve_npt_pmap into head.

Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal wi

Merge projects/bhyve_npt_pmap into head.

Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal with nested page faults in the context of that vmspace. This also
enables features like accessed/dirty bit tracking, swapping to disk and
transparent superpage promotions of guest memory.

Guest vmspace:
Each bhyve guest has a unique vmspace to represent the physical memory
allocated to the guest. Each memory segment allocated by the guest is
mapped into the guest's address space via the 'vmspace->vm_map' and is
backed by an object of type OBJT_DEFAULT.

pmap types:
The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.

The PT_X86 pmap type is used by the vmspace associated with the host kernel
as well as user processes executing on the host. The PT_EPT pmap is used by
the vmspace associated with a bhyve guest.

Page Table Entries:
The EPT page table entries as mostly similar in functionality to regular
page table entries although there are some differences in terms of what
bits are used to express that functionality. For e.g. the dirty bit is
represented by bit 9 in the nested PTE as opposed to bit 6 in the regular
x86 PTE. Therefore the bitmask representing the dirty bit is now computed
at runtime based on the type of the pmap. Thus PG_M that was previously a
macro now becomes a local variable that is initialized at runtime using
'pmap_modified_bit(pmap)'.

An additional wrinkle associated with EPT mappings is that older Intel
processors don't have hardware support for tracking accessed/dirty bits in
the PTE. This means that the amd64/pmap code needs to emulate these bits to
provide proper accounting to the VM subsystem. This is achieved by using
the following mapping for EPT entries that need emulation of A/D bits:
Bit Position Interpreted By
PG_V 52 software (accessed bit emulation handler)
PG_RW 53 software (dirty bit emulation handler)
PG_A 0 hardware (aka EPT_PG_RD)
PG_M 1 hardware (aka EPT_PG_WR)

The idea to use the mapping listed above for A/D bit emulation came from
Alan Cox (alc@).

The final difference with respect to x86 PTEs is that some EPT implementations
do not support superpage mappings. This is recorded in the 'pm_flags' field
of the pmap.

TLB invalidation:
The amd64/pmap code has a number of ways to do invalidation of mappings
that may be cached in the TLB: single page, multiple pages in a range or the
entire TLB. All of these funnel into a single EPT invalidation routine called
'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and
sends an IPI to the host cpus that are executing the guest's vcpus. On a
subsequent entry into the guest it will detect that the EPT has changed and
invalidate the mappings from the TLB.

Guest memory access:
Since the guest memory is no longer wired we need to hold the host physical
page that backs the guest physical page before we can access it. The helper
functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.

PCI passthru:
Guest's with PCI passthru devices will wire the entire guest physical address
space. The MMIO BAR associated with the passthru device is backed by a
vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that
have one or more PCI passthru devices attached to them.

Limitations:
There isn't a way to map a guest physical page without execute permissions.
This is because the amd64/pmap code interprets the guest physical mappings as
user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U
shares the same bit position as EPT_PG_EXECUTE all guest mappings become
automatically executable.

Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews
as well as their support and encouragement.

Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing
object for pci passthru mmio regions.

Special thanks to Peter Holm for testing the patch on short notice.

Approved by: re
Discussed with: grehan
Reviewed by: alc, kib
Tested by: pho

show more ...

MFC - tracking update.

IFC @ r255692

Comment out IA32_MISC_ENABLE MSR access - this doesn't exist on AMD.
Need to sort out how arch-specific MSRs will be handled.

Merge head