sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

MFC

IFC @ r234692

sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c

- Add API to allow vmm FPU state init/save/restore.

FP stuff discussed with: kib

Merge head r232686 through r233825 into projects/pf/head.

Copy i386 psl.h to x86 and replace amd64/i386/pc98 psl.h with stubs.

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core

Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a

Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code. pmap uses
a variation of the PAE code in order to avoid having to worry about 4
levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
i386 loader. This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
not been translated yet, and some that I cheated and wrote dumb C
versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
passing, as is native on the amd64 ABI), and the 'syscall' instruction
for syscalls. int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
of places (eg: to find which register they use to replace the trashed
%rcx register in the syscall instruction). As a result, there is not a
lot of similarity. I did look at NetBSD a few times while debugging to
get some ideas about what I might have done wrong in my first attempt.

show more ...

Allow bit 21 of EFLAGS register (PSL_ID) be changed in the use-mode without
ill effects. This should fix problems threaded programs are having with
auto-detecting CPU type.

Reported by: Joe Clarke <

Allow bit 21 of EFLAGS register (PSL_ID) be changed in the use-mode without
ill effects. This should fix problems threaded programs are having with
auto-detecting CPU type.

Reported by: Joe Clarke <marcus@marcuscom.com>
Tested by: Joe Clarke <marcus@marcuscom.com>
Reviewed by: jhb
MFC after: 1 week

show more ...

$Id$ -> $FreeBSD$

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

show more ...

Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.

Fix security holes in sigreturn(), ptrace() and procfs. sigreturn()
attempted to check for insecure and fatal eflags and segment
selectors, but missed many cases and got the IOPL check back to
front

Fix security holes in sigreturn(), ptrace() and procfs. sigreturn()
attempted to check for insecure and fatal eflags and segment
selectors, but missed many cases and got the IOPL check back to
front. The other syscalls didn't check at all.

sys_process.c, machdep.c:
Only allow PT_WRITE_U to write to the registers (ordinary and FP).

psl.h, locore.s, machdep.c:
Eliminate PSL_MBZ, PSL_MBO and PSL_USERCLR. We are not supposed
to assume anything about the reserved bits. Use PSL_USERCHANGE
and PSL_KERNEL instead. Rename PSL_USERSET to PSL_USER.

exception.s:
Define a private label for use by doreti when returning to user
mode fails.

machdep.c:
In syscalls, allow changing only the eflags that can be changed on
486's in user mode (no longer attempt to allow benign IOPL changes;
allow changing the nasty PSL_NT; don't allow changing the i586
bits).

Don't attempt to check all the cases involving invalid selectors
and %eip's. Just check for privilege violations and let the invalid
things cause a trap.

procfs_machdep.c:
Call the ptrace register functions to do all the work for reading
and writing ordinary registers and for single stepping.

trap.c:
Ignore traps caused by PSL_NT being set. Previously, users could
cause a fatal trap in user mode by setting PSL_NT and executing an
iret, and a fatal trap in kernel mode by setting PSL_NT and making
a syscall. PSL_NT was cleared too late and not in enough modes to
fix the problem.

Make all traps in user mode (except T_NMI) nonfatal.

Recover from traps caused by attempting to load invalid user
registers in doreti by restarting the traps so that they appear to
occur in user mode.
---

Fix bogons that I noticed while fixing the above:

psl.h:
Fix some comments.

Uniformize idempotency ifdef.

exception.s, machdep.c:
Remove rsvd[0-14]. rsvd0 hasn't been reserved since the 486 came
out. Replace rsvd0 by `align'. rsvd[0-11] used wrong (magic
non-unique) trap numbers. Replace rsvd[1-14] by rsvd.

locore.s:
Enable alignment check flag on 486's and 586's.

machdep.c:
Use a better type for kstack[].

Use TFREGP() to find the registers.

Reformat ptrace functions from SEF to something closer to KNF.

procfs_machdep.c:
The wrong pointer to the registers got fixed as a side effect.

Implement reading and writing of FP registers.

/proc/*/*regs now work (only) for processes that are in memory.

Clean up comments.

trap.c, trap.h:
Remove unused trap types.

show more ...

Add back in CPU detection copde from 1.1.5. As an added bonus, the
hw.model MIB variable is now declared correctly.

Correct definitions of flags used by sigreturn to validate sigcontext.

Made all header files idempotent and moved incorrect common data from
headers into a related source file. Added cons.h as first step towards
moving i386/i386/cons.h to machine/cons.h where it belong

Made all header files idempotent and moved incorrect common data from
headers into a related source file. Added cons.h as first step towards
moving i386/i386/cons.h to machine/cons.h where it belongs.

show more ...

Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup. Added $Id$ to files that did not have any version info, etc

Initial import, 0.1 + pk 0.2.4-B1

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core

Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a

Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code. pmap uses
a variation of the PAE code in order to avoid having to worry about 4
levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
i386 loader. This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
not been translated yet, and some that I cheated and wrote dumb C
versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
passing, as is native on the amd64 ABI), and the 'syscall' instruction
for syscalls. int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
of places (eg: to find which register they use to replace the trashed
%rcx register in the syscall instruction). As a result, there is not a
lot of similarity. I did look at NetBSD a few times while debugging to
get some ideas about what I might have done wrong in my first attempt.

show more ...

Allow bit 21 of EFLAGS register (PSL_ID) be changed in the use-mode without
ill effects. This should fix problems threaded programs are having with
auto-detecting CPU type.

Reported by: Joe Clarke <

Allow bit 21 of EFLAGS register (PSL_ID) be changed in the use-mode without
ill effects. This should fix problems threaded programs are having with
auto-detecting CPU type.

Reported by: Joe Clarke <marcus@marcuscom.com>
Tested by: Joe Clarke <marcus@marcuscom.com>
Reviewed by: jhb
MFC after: 1 week

show more ...

$Id$ -> $FreeBSD$

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

show more ...

Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.