bsd.port.mk: No need to support fmake anymore

There's no need to support fmake anymore. Always assume we can use
bmake's :tA modifier. The ports tree hasn't supported fmake in about a
decade anyway.

bsd.port.mk: No need to support fmake anymore

There's no need to support fmake anymore. Always assume we can use
bmake's :tA modifier. The ports tree hasn't supported fmake in about a
decade anyway. Simplify here.

Sponsored by: Netflix
Reviewed by: brooks, emaste
Pull Request: https://github.com/freebsd/freebsd-src/pull/980

show more ...

Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

Merge from head

Sponsored by: Gandi.net

Merge from head

Finish merging from head, messed up in previous attempt

Merge r286744-r287584 from head.

Merge ^/head r286858 through r287489.

Avoid sub-shell for realpath(1) for bmake by using its built-in :tA.

MFC after: 2 weeks
Approved by: portmgr (implicit)

Merge from head@274682

Merge HEAD@r272944.

IFC @r272481

Sync to HEAD@r272516.

Reintegrate head@r272414

Sponsored by: The FreeBSD Foundation

Revise r272363 by collapsing the tests into a for loop.

This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports direct

Revise r272363 by collapsing the tests into a for loop.

This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports directory
that relies on /usr/ports but is not rooted in it). This ensures that any
generated PORTSDIR used is always the actual location.

Submitted by: jkim (different implementation)

show more ...

Always resolve PORTSDIR to absolute paths using realpath(1).

Reported by: madpilot
Reviewed by: bapt
X-MFC-With: 272282

Search for the nearest PORTSDIR where Mk/bsd.ports.mk exists, from .CURDIR.
This will only take effect if PORTSDIR is not set, as previously supported.

Use .if exists(), for four specific possibilit

Search for the nearest PORTSDIR where Mk/bsd.ports.mk exists, from .CURDIR.
This will only take effect if PORTSDIR is not set, as previously supported.

Use .if exists(), for four specific possibilities relative to .CURDIR:
., .., ../.., and ../../.. The fourth possibility is primarily in case
ports ever grows a third level. If none of these paths exist, fall back to
the old default of /usr/ports.

This removes the need to set PORTSDIR explicitly (or via wrapper script) if
one is running out of a ports tree that is not in /usr/ports, but in a
home directory.

Reviewed by: bapt, bdrewery (older version)
CR: D799
MFC after: 1 week
Sponsored by: Spectra Logic

show more ...

Enable testing of customized variants of bsd.port.mk and
bsd.port.subdir.mk, without the overhead of an additional ports tree.

Use
make BSDPORTMK='${PORTSDIR}/My.Mk/bsd.port.mk' target
and
make

Enable testing of customized variants of bsd.port.mk and
bsd.port.subdir.mk, without the overhead of an additional ports tree.

Use
make BSDPORTMK='${PORTSDIR}/My.Mk/bsd.port.mk' target
and
make BSDPORTSUBDIRMK='${PORTSDIR}/My.Mk/bsd.port.subdir.mk' target

to build with the alternate versions.

MFC after: 3 days

show more ...

Style.

Add $FreeBSD$

Move bsd.port.*mk to under ${PORTSDIR}/Mk (already repository copied).
There are only skeletons left here; they merely serve as a backup to
include the real versions under ${PORTSDIR}/Mk while we upd

Move bsd.port.*mk to under ${PORTSDIR}/Mk (already repository copied).
There are only skeletons left here; they merely serve as a backup to
include the real versions under ${PORTSDIR}/Mk while we update the ports
tree to include them directly.

show more ...

(0) Fast INDEX generation. Only print out the directory name and
don't recurse in "make describe". The new INDEX target in
ports/Makefile invokes a perl script to recurse and convert them

(0) Fast INDEX generation. Only print out the directory name and
don't recurse in "make describe". The new INDEX target in
ports/Makefile invokes a perl script to recurse and convert them
into package names.

While I'm here, change the name of targets and move them around a
little bit for the sake of consistency.

It is also probably worth noting here that the meaning of the
"build dependency" list in INDEX has been changed slightly
changed. The old list was "build depends and its build depends"
-- not particularly useful if you had things like autoconf, which
run-depend on gm4 (you install all the things listed here and
you'll get an autoconf that won't run).

It is now "build depends and its run depends" -- you install
everything listed here, and you'll be able to build the port.
Submitted by: steve

(0') Fast README.html generation. It uses ports/INDEX to find
dependencies instead of embarking on to a recursive loop.
Submitted by: steve

(1) Remove NO_WRKDIR and NO_EXTRACT. Their functionality are easily
replacable with NO_WRKSUBDIR=t and EXTRACT_ONLY= (nothing on right
side), and they get in the way of read-only port trees.

(2) Surround first few variable definitions with ".if !defined()".
This will make cross-compilation easier and also speed up make
processes.

(3) Call sysctl with absolute path. Prefer the one in /sbin over the
one in /usr/sbin.

(4) Add four new variables

PKGINSTALL?= ${PKGDIR}/INSTALL
PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
PKGREQ?= ${PKGDIR}/REQ
PKGMESSAGE?= ${PKGDIR}/MESSAGE

and use them in PKG_ARGS. Frobbing with PKG_ARGS directly is
strongly discouraged.

(5) Change PKG_SUFX to ".tar" (instead of ".tgz") if PKG_NOCOMPRESS is
defined. This is intended only for our own use.

(6) Add more sites to MASTER_SITE_GNU.
Submitted by: billf

(7) Override MANUAL_PACKAGE_BUILD if PARALLEL_PACKAGE_BUILD is
defined. This is intended only for our own use.

(8) Add new target "ignorelist" which will print out the package name
if the port is not going to be built on this machine. This is
intended only for our own use.

(9) Make mtree a little quieter.

show more ...

(1) New variable MAKE_ARGS: will be appended to build/install make argument
list. The old MAKE_FLAGS was a little hard to use since it had a weird
default ("-f").
Suggested by: Shigeyuki FUK

(1) New variable MAKE_ARGS: will be appended to build/install make argument
list. The old MAKE_FLAGS was a little hard to use since it had a weird
default ("-f").
Suggested by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>

(2) Add new targets clean-restricted and clean-for-cdrom, which will
delete RESTRICTED and NO_CDROM packages and distfiles from the top.
Reviewed by: jkh

(3) Add depends to list of things to recurse on. It will help people
who are trying to fetch some ports plus their dependencies.

Requested by: Chris Dillon <cdillon@wolves.k12.mo.us>

show more ...

(1) Add new variables LOOP_VAR and LOOP_OPTIONS to implement building several
packages from a single port. LOOP_VAR is the name of the variable
and LOOP_OPTIONS is a space-separated list of

(1) Add new variables LOOP_VAR and LOOP_OPTIONS to implement building several
packages from a single port. LOOP_VAR is the name of the variable
and LOOP_OPTIONS is a space-separated list of values it should
take. When these are set, the target "package-loop" will go
through a clean and package loop for all the options. The
"package-loop" target is defined as "package" when LOOP_VAR is not
defined, so if you are in the business for building packages, you
should use "package-loop" all the time. (This target is added to
bsd.port.subdir.mk too.)

Also, the "describe" target prints out multiple lines so that all
options will go into the INDEX. (In other words, if you define
these variables, INDEX is going to look real silly if you don't
put ${${LOOP_VAR}} in PKGNAME.)

Seconded by: obrien ("ANYTHING")

(2) Turn off regexp support for LIB_DEPENDS. It is a fixed string of
the form <NAME>.<VER> now.
Tested by: several rounds of complete package builds

(3) Check checksum even if NO_EXTRACT is defined.

(4) Cosmetic fix for message in MANUAL_PACKAGE_BUILD case.

show more ...

Add "deinstall" to list of targets. This is only fair since "install" and
"reinstall" are already here. :)

Add new target "checksubdirs". It will warn about any subdirectories that
are not in the SUBDIR list. It also knows about the "standard" directories
that are to be ignored ("CVS", "distfiles", etc.

Add new target "checksubdirs". It will warn about any subdirectories that
are not in the SUBDIR list. It also knows about the "standard" directories
that are to be ignored ("CVS", "distfiles", etc.).

show more ...