Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Fix a bug with dirty file system handling.

r356313 broke handling of dirty file system because we have restricted
the correction of "odd" byte sequences to checkfat(), and as a result
the dirty bit

Fix a bug with dirty file system handling.

r356313 broke handling of dirty file system because we have restricted
the correction of "odd" byte sequences to checkfat(), and as a result
the dirty bit is never cleared. The old fsck_msdosfs code would write
FAT twice to fix the dirty bit, which is also not ideal.

Fix this by introducing a new rountine, cleardirty() which will perform
the set of clean bit only, and use it in checkfilesys() if we thought
the file system was dirty.

Reviewed by: cem, emaste
MFC after: 3 day
Differential Revision: https://reviews.freebsd.org/D24581

show more ...

Reduce memory footprint of fsck_msdosfs.

This is a re-apply r356249 with changes to make GCC happy.

This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support

Reduce memory footprint of fsck_msdosfs.

This is a re-apply r356249 with changes to make GCC happy.

This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.

With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.

Address this by taking a different approach of validating the FAT.

The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.

We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.

When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.

As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.

sbin/fsck_msdosfs/boot.c:

- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.

sbin/fsck_msdosfs/check.c:

- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.

sbin/fsck_msdosfs/dir.c:

- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).

sbin/fsck_msdosfs/dosfs.h:

- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.

sbin/fsck_msdosfs/ext.h:

- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.

sbin/fsck_msdosfs/fat.c:

- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.

sbin/fsck_msdosfs/fat.c:

- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().

Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965

show more ...

Revert r356249 for now as it broke GCC builds.

Reduce memory footprint of fsck_msdosfs.

This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used

Reduce memory footprint of fsck_msdosfs.

This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.

With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.

Address this by taking a different approach of validating the FAT.

The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.

We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.

When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.

As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.

sbin/fsck_msdosfs/boot.c:

- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.

sbin/fsck_msdosfs/check.c:

- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.

sbin/fsck_msdosfs/dir.c:

- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).

sbin/fsck_msdosfs/dosfs.h:

- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.

sbin/fsck_msdosfs/ext.h:

- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.

sbin/fsck_msdosfs/fat.c:

- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.

sbin/fsck_msdosfs/fat.c:

- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().

Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Merge head from 7/28

Sync to HEAD@r269943.

newfs_msdosfs: Respect FSFIXFAT

Fix some whitespace issues while here.

Obtained from: NetBSD (rev. 1.9)
MFC after: 3 days

Minor (mostly cosmetic) cleanups

Several whitespace fixes
convert *rootDir from external to static.

Obtained from: NetBSD, OpenBSD (partial)
MFC after: 3 days

Merge fresh head.

MFC

IFC @ r242684

Sync from head

Make fsck and fsck_msdosfs WARNS=6 clean

- sprinkle const
- add volatile qualifier to avoid vfork clobbering

Inspired by: NetBSD
PR: bin/139802
Reviewed by: ed

MFC r203872:
Bug fixes from NetBSD.

MFC r203871:
License changes from NetBSD.
Move to 2 clause license, approved by Wolfgang Solfrank.

IFH@204581

Bug fixes from NetBSD
- fix sign-compare issues.
- ANSIfy a couple of functions.
- Remove more duplicate #includes.
- Memory leak found by Coverity on NetBSD.

Submitted by: Pedro F. Giffuni <giffuni

Bug fixes from NetBSD
- fix sign-compare issues.
- ANSIfy a couple of functions.
- Remove more duplicate #includes.
- Memory leak found by Coverity on NetBSD.

Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Reviewed by: bde
MFC after: 2 weeks

show more ...

License changes from NetBSD.
Move to 2 clause license, approved by Wolfgang Solfrank.

Submitted by: Pedro F. Giffuni <giffunip tutopia com>
MFC after: 2 weeks

Prefer the __printflike() macro to GCC's __attribute__ stuff.

Fixed operation of -f to match its documentation and fsck_ffs. It
has now has no effect except in combination with -p, and plain fsck
checks all file systems instead of skipping clean ones for msdos

Fixed operation of -f to match its documentation and fsck_ffs. It
has now has no effect except in combination with -p, and plain fsck
checks all file systems instead of skipping clean ones for msdosfs
only.

Renamed the force flag to skipclean and inverted its logic as in
fsck_ffs.

show more ...

Fixed style bugs in previous commit (unsorting of declarations and poor
wording in a comment).