Remove copyright strings ifdef'd out

We've ifdef'd out the copyright strings for some time now. Go ahead and
remove the ifdefs. Plus whatever other detritis was left over from other
recent removals.

Remove copyright strings ifdef'd out

We've ifdef'd out the copyright strings for some time now. Go ahead and
remove the ifdefs. Plus whatever other detritis was left over from other
recent removals. These copyright strings are present in the comments and
are largely from CSRG's attempt at adding their copyright to every
binary file (which modern interpretations of the license doesn't
require).

Sponsored by: Netflix

show more ...

sbin: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl

sbin: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by: Netflix

show more ...

Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

Merge ^/head r340368 through r340426.

In preparation for adding inode check-hashes, clean up and
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getin

In preparation for adding inode check-hashes, clean up and
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.

Convert the utilities that had been using the undocumented
interface to use the new documented interface.

No functional change (as for now the libufs library does not
do inode check-hashes).

Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix

show more ...

Merge ^/head r339813 through r340125.

In preparation for adding inode check-hashes, convert the clri(8)
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).

Re

In preparation for adding inode check-hashes, convert the clri(8)
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).

Reviewed by: kib
Sponsored by: Netflix

show more ...

Refactoring of reading and writing of the UFS/FFS superblock.
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() an

Refactoring of reading and writing of the UFS/FFS superblock.
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.

No functional change intended.

Reviewed by: kib

show more ...

Merge ^/head r325999 through r326131.

General further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier f

General further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

show more ...

Merge ^/head r314420 through r314481.

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

show more ...

Use an intermediate pointer to avoid strict alias check warnings
on gcc 4.2. This is required for tinderbox which doesn't have
-f-no-strict-aliasing in it's custom CFLAGS.

Give variable an initial value. Use errx() instead of fprintf().

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core, imp

Use __FBSDID() to quiet GCC 3.3 warnings.

Create a new 32-bit fs_flags word in the superblock. Add code to move
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused f

Create a new 32-bit fs_flags word in the superblock. Add code to move
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.

Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.

Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.

show more ...

use 'file system superblock' for the error message. This will match other
disk utilities.

Discussed with: bde

Print a more realistic usage message 'special_device' 'inode_number'. This
matches the synopsis given in the manual page.

MFC after: 3 days

s/filesystem/file system/g as discussed on -developers

Apply __FBSDID(), ISOfy, fix easy warning.

This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability

This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.

Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.

Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).

Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>

show more ...

Sigh, more BBSIZE related breakage.

Sponsored by: DARPA & NAI Labs.

Kill register

$Id$ -> $FreeBSD$