sbin: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remo

sbin: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

zfs: merge openzfs/zfs@431083f75

Notable upstream pull request merges:
#12194 Fix short-lived txg caused by autotrim
#13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()
#13392 Imple

zfs: merge openzfs/zfs@431083f75

Notable upstream pull request merges:
#12194 Fix short-lived txg caused by autotrim
#13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()
#13392 Implementation of block cloning for ZFS
#13741 SHA2 reworking and API for iterating over multiple implementations
#14282 Sync thread should avoid holding the spa config write lock
when possible
#14283 txg_sync should handle write errors in ZIL
#14359 More adaptive ARC eviction
#14469 Fix NULL pointer dereference in zio_ready()
#14479 zfs redact fails when dnodesize=auto
#14496 improve error message of zfs redact
#14500 Skip memory allocation when compressing holes
#14501 FreeBSD: don't verify recycled vnode for zfs control directory
#14502 partially revert PR 14304 (eee9362a7)
#14509 Fix per-jail zfs.mount_snapshot setting
#14514 Fix data race between zil_commit() and zil_suspend()
#14516 System-wide speculative prefetch limit
#14517 Use rw_tryupgrade() in dmu_bonus_hold_by_dnode()
#14519 Do not hold spa_config in ZIL while blocked on IO
#14523 Move dmu_buf_rele() after dsl_dataset_sync_done()
#14524 Ignore too large stack in case of dsl_deadlist_merge
#14526 Use .section .rodata instead of .rodata on FreeBSD
#14528 ICP: AES-GCM: Refactor gcm_clear_ctx()
#14529 ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx()
#14532 Handle unexpected errors in zil_lwb_commit() without ASSERT()
#14544 icp: Prevent compilers from optimizing away memset()
in gcm_clear_ctx()
#14546 Revert zfeature_active() to static
#14556 Remove bad kmem_free() oversight from previous zfsdev_state_list
patch
#14563 Optimize the is_l2cacheable functions
#14565 FreeBSD: zfs_znode_alloc: lock the vnode earlier
#14566 FreeBSD: fix false assert in cache_vop_rmdir when replaying ZIL
#14567 spl: Add cmn_err_once() to log a message only on the first call
#14568 Fix incremental receive silently failing for recursive sends
#14569 Restore ASMABI and other Unify work
#14576 Fix detection of IBM Power8 machines (ISA 2.07)
#14577 Better handling for future crypto parameters
#14600 zcommon: Refactor FPU state handling in fletcher4
#14603 Fix prefetching of indirect blocks while destroying
#14633 Fixes in persistent error log
#14639 FreeBSD: Remove extra arc_reduce_target_size() call
#14641 Additional limits on hole reporting
#14649 Drop lying to the compiler in the fletcher4 code
#14652 panic loop when removing slog device
#14653 Update vdev state for spare vdev
#14655 Fix cloning into already dirty dbufs
#14678 Revert "Do not hold spa_config in ZIL while blocked on IO"

Obtained from: OpenZFS
OpenZFS commit: 431083f75bdd3efaee992bdd672625ec7240d252

show more ...

loader: zfs should support bootonce an nextboot

bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.

By default, t

loader: zfs should support bootonce an nextboot

bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.

By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.

By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.

bootonce dataset name is recorded in boot pool labels, bootenv area.

in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.

bootonce and nextboot features are usable in both UEFI and BIOS boot.

To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).

At this time, only lua loader is updated.

Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512

show more ...

MFH

Sponsored by: Rubicon Communications, LLC (netgate.com)

bectl(8): Fix output of `bectl list` for the 'Mountpoint' column.

Currently, the output of `bectl list` doesn't align the 'Mountpoint' column
correctly when the 'mounted' property of a boot environm

bectl(8): Fix output of `bectl list` for the 'Mountpoint' column.

Currently, the output of `bectl list` doesn't align the 'Mountpoint' column
correctly when the 'mounted' property of a boot environment dataset is longer
than the default column width.

Set the 'Mountpoint' column width to the boot environment dataset with the
longest 'mounted' property or to the default width, whichever is greater.

PR: 241064
Reported by: vermaden@interia.pl
Reviewed by: kevans (mentor)
Approved by: kevans (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26048

show more ...

Merge ^/head r351732 through r352104.

bectl(8): initialize reverse earlier

This turns into a warning in GCC 4.2 that 'reverse' may be used
uninitialized in this function. While I don't immediately see where it's
deciding this from (ther

bectl(8): initialize reverse earlier

This turns into a warning in GCC 4.2 that 'reverse' may be used
uninitialized in this function. While I don't immediately see where it's
deciding this from (there's only two paths that make column != NULL, and
they both set reverse), initializing reverse earlier is good for clarity.

MFC after: 3 days

show more ...

bectl(8): implement sorting for 'bectl list' output

Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and

bectl(8): implement sorting for 'bectl list' output

Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:

- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv

The default output for 'bectl list' is now ascending alphabetical order of
BE name.

To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'

Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818

show more ...

Merge ^/head r337646 through r338014.

bectl(8): Use strcmp, rather than trying to directly compare

Merge libbe(3)/bectl(8) from projects/bectl into head

bectl(8) is an administrative interface for working with ZFS boot
environments, intended to provide a superset of the functionality provided
by

Merge libbe(3)/bectl(8) from projects/bectl into head

bectl(8) is an administrative interface for working with ZFS boot
environments, intended to provide a superset of the functionality provided
by sysutils/beadm.

libbe(3) is the back-end library that the required functionality has been
pulled out into for later reuse.

These were originally written for GSoC 2017 under the mentorship of
allanjude@.

bectl(8) has proven pretty stable in my testing, with the known bug
documented in the man page.

Relnotes: yes

show more ...

libbe(3)/bectl(8): Standardize $FreeBSD$ IDs

libbe(3): Check that dataset is to be mounted at / for be_exists

This makes the be_exists behavior match the comments that assert that we've
already checked that the dataset derived from the BE name

libbe(3): Check that dataset is to be mounted at / for be_exists

This makes the be_exists behavior match the comments that assert that we've
already checked that the dataset derived from the BE name is set to mount at
/.

Other changes of note:
- bectl_list sees another change; changing mountpoint based on mount status
turns out to be a bad idea, so instead make the mounted property of the
returned nvlist the path that it's mounted at

- Always return the "mountpoint" property in "mountpoint" if it's ste

show more ...

bectl(8): Only show mountpoint if the dataset is actually mounted

This is to accomodate a later change in libbe(3) that will always return the
mountpoint, whether it be the directory the dataset is

bectl(8): Only show mountpoint if the dataset is actually mounted

This is to accomodate a later change in libbe(3) that will always return the
mountpoint, whether it be the directory the dataset is actively mounted at
or the "mountpoint" property.

show more ...

bectl(8): Split list functionality out into its own file as well