ssh: Update to OpenSSH 9.7p1

This release contains mostly bugfixes.

It also makes support for the DSA signature algorithm a compile-time
option, with plans to disable it upstream later this year an

ssh: Update to OpenSSH 9.7p1

This release contains mostly bugfixes.

It also makes support for the DSA signature algorithm a compile-time
option, with plans to disable it upstream later this year and remove
support entirely in 2025.

Full release notes at https://www.openssh.com/txt/release-9.7

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

show more ...

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory saf

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

show more ...

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting

ssh: update to OpenSSH v8.9p1

Release notes are available at https://www.openssh.com/txt/release-8.9

Some highlights:

* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)

* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.

* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.

Future deprecation notice
=========================

A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.

Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.

MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation

show more ...

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new ho

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

show more ...

Replace literal uses of /usr/local in C sources with _PATH_LOCALBASE

Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, i

Replace literal uses of /usr/local in C sources with _PATH_LOCALBASE

Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, in configuration
files, or in the documentation, but 19 uses have been identified in C
source files or headers outside the contrib and sys/contrib directories.

This commit makes it possible to set _PATH_LOCALBASE in paths.h to use
a different prefix for locally installed software.

In order to avoid changes to openssh source files, LOCALBASE is passed to
the build via Makefiles under src/secure. While _PATH_LOCALBASE could have
been used here, there is precedent in the construction of the path used to
a xauth program which depends on the LOCALBASE value passed on the compiler
command line to select a non-default directory.

This could be changed in a later commit to make the openssh build
consistently use _PATH_LOCALBASE. It is considered out-of-scope for this
commit.

Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26942

show more ...

Merge ^/head r357921 through r357930.

Upgrade to OpenSSH 7.9p1.

MFC after: 2 months
Sponsored by: The FreeBSD Foundation

Merge ^/head r339015 through r339669.

openssh: cherry-pick OpenSSL 1.1.1 compatibility

Compatibility with existing OpenSSL versions is maintained.

Upstream commits:
482d23bcac upstream: hold our collective noses and use the openssl-1.1

openssh: cherry-pick OpenSSL 1.1.1 compatibility

Compatibility with existing OpenSSL versions is maintained.

Upstream commits:
482d23bcac upstream: hold our collective noses and use the openssl-1.1.x
48f54b9d12 adapt -portable to OpenSSL 1.1x API
86e0a9f3d2 upstream: use only openssl-1.1.x API here too
a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest
cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl.

Trivial conflicts in sshkey.c and test_sshkey.c were resolved.

Connect libressl-api-compat.c to the build, and regenerate config.h

Reviewed by: des
Approved by: re (rgrimes)
MFC after: 2 seeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17444

show more ...

openssh: cherry-pick OpenSSL 1.1.1 compatibility

Upstream commits:
482d23bcac upstream: hold our collective noses and use the openssl-1.1.x
48f54b9d12 adapt -portable to OpenSSL 1.1x API
86e0a9f3d2

openssh: cherry-pick OpenSSL 1.1.1 compatibility

Upstream commits:
482d23bcac upstream: hold our collective noses and use the openssl-1.1.x
48f54b9d12 adapt -portable to OpenSSL 1.1x API
86e0a9f3d2 upstream: use only openssl-1.1.x API here too
a3fd8074e2 upstream: missed a bit of openssl-1.0.x API in this unittest
cce8cbe0ed Fix openssl-1.1 fallout for --without-openssl.

Trivial conflicts in sshkey.c and test_sshkey.c were resolved.

Sponsored by: The FreeBSD Foundation

show more ...

Merge ^/head r338392 through r338594.

Upgrade to OpenSSH 7.8p1.

Approved by: re (kib@)

Upgrade to OpenSSH 7.7p1.

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. F

Upgrade to OpenSSH 7.6p1. This will be followed shortly by 7.7p1.

This completely removes client-side support for the SSH 1 protocol,
which was already disabled in 12 but is still enabled in 11. For that
reason, we will not be able to merge 7.6p1 or newer back to 11.

show more ...

Upgrade to OpenSSH 7.3p1.

MFH

Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 7.2p2.

MFH

Sponsored by: The FreeBSD Foundation

Merge ^/head r294169 through r294598.

MFH @r294567

Upgrade to OpenSSH 7.0p1.

MFH

Sponsored by: The FreeBSD Foundation

Upgrade to OpenSSH 6.9p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week