| Kconfig (b93cf3f0bb45560d2ce62bdcc2181c40660cfdbf) | Kconfig (afa17a500a3667f66df450100538d06769529bba) |
|---|---|
| 1menu "CAN Device Drivers" 2 depends on CAN 3 4config CAN_VCAN 5 tristate "Virtual Local CAN Interface (vcan)" 6 depends on CAN 7 default N 8 ---help--- --- 21 unchanged lines hidden (view full) --- 30 bit-rate specified via Netlink argument "bitrate" when the device 31 get started. This works fine for the most common CAN controllers 32 with standard bit-rates but may fail for exotic bit-rates or CAN 33 source clock frequencies. Disabling saves some space, but then the 34 bit-timing parameters must be specified directly using the Netlink 35 arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". 36 If unsure, say Y. 37 | 1menu "CAN Device Drivers" 2 depends on CAN 3 4config CAN_VCAN 5 tristate "Virtual Local CAN Interface (vcan)" 6 depends on CAN 7 default N 8 ---help--- --- 21 unchanged lines hidden (view full) --- 30 bit-rate specified via Netlink argument "bitrate" when the device 31 get started. This works fine for the most common CAN controllers 32 with standard bit-rates but may fail for exotic bit-rates or CAN 33 source clock frequencies. Disabling saves some space, but then the 34 bit-timing parameters must be specified directly using the Netlink 35 arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". 36 If unsure, say Y. 37 |
| 38config CAN_SJA1000 39 depends on CAN_DEV && HAS_IOMEM 40 tristate "Philips SJA1000" 41 ---help--- 42 Driver for the SJA1000 CAN controllers from Philips or NXP 43 44config CAN_SJA1000_ISA 45 depends on CAN_SJA1000 && ISA 46 tristate "ISA Bus based legacy SJA1000 driver" 47 ---help--- 48 This driver adds legacy support for SJA1000 chips connected to 49 the ISA bus using I/O port, memory mapped or indirect access. 50 51config CAN_SJA1000_PLATFORM 52 depends on CAN_SJA1000 53 tristate "Generic Platform Bus based SJA1000 driver" 54 ---help--- 55 This driver adds support for the SJA1000 chips connected to 56 the "platform bus" (Linux abstraction for directly to the 57 processor attached devices). Which can be found on various 58 boards from Phytec (http://www.phytec.de) like the PCM027, 59 PCM038. 60 61config CAN_SJA1000_OF_PLATFORM 62 depends on CAN_SJA1000 && PPC_OF 63 tristate "Generic OF Platform Bus based SJA1000 driver" 64 ---help--- 65 This driver adds support for the SJA1000 chips connected to 66 the OpenFirmware "platform bus" found on embedded systems with 67 OpenFirmware bindings, e.g. if you have a PowerPC based system 68 you may want to enable this option. 69 70config CAN_EMS_PCI 71 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" 72 depends on PCI && CAN_SJA1000 73 ---help--- 74 This driver is for the one, two or four channel CPC-PCI, 75 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche 76 (http://www.ems-wuensche.de). 77 78config CAN_EMS_USB 79 tristate "EMS CPC-USB/ARM7 CAN/USB interface" 80 depends on USB && CAN_DEV 81 ---help--- 82 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface 83 from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 84 85config CAN_KVASER_PCI 86 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" 87 depends on PCI && CAN_SJA1000 88 ---help--- 89 This driver is for the the PCIcanx and PCIcan cards (1, 2 or 90 4 channel) from Kvaser (http://www.kvaser.com). 91 |
|
| 38config CAN_AT91 39 tristate "Atmel AT91 onchip CAN controller" | 92config CAN_AT91 93 tristate "Atmel AT91 onchip CAN controller" |
| 40 depends on CAN_DEV && ARCH_AT91SAM9263 | 94 depends on CAN && CAN_DEV && ARCH_AT91SAM9263 |
| 41 ---help--- 42 This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. 43 | 95 ---help--- 96 This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. 97 |
| 44source "drivers/net/can/sja1000/Kconfig" | 98config CAN_TI_HECC 99 depends on CAN_DEV && ARCH_OMAP3 100 tristate "TI High End CAN Controller" 101 ---help--- 102 Driver for TI HECC (High End CAN Controller) module found on many 103 TI devices. The device specifications are available from www.ti.com |
| 45 | 104 |
| 46source "drivers/net/can/usb/Kconfig" | 105config CAN_MCP251X 106 tristate "Microchip MCP251x SPI CAN controllers" 107 depends on CAN_DEV && SPI 108 ---help--- 109 Driver for the Microchip MCP251x SPI CAN controllers. |
| 47 | 110 |
| 111config CAN_MSCAN 112 depends on CAN_DEV && (PPC || M68K || M68KNOMMU) 113 tristate "Support for Freescale MSCAN based chips" 114 ---help--- 115 The Motorola Scalable Controller Area Network (MSCAN) definition 116 is based on the MSCAN12 definition which is the specific 117 implementation of the Motorola Scalable CAN concept targeted for 118 the Motorola MC68HC12 Microcontroller Family. 119 120config CAN_MPC52XX 121 tristate "Freescale MPC5xxx onboard CAN controller" 122 depends on CAN_MSCAN && PPC_MPC52xx 123 ---help--- 124 If you say yes here you get support for Freescale's MPC52xx 125 onboard dualCAN controller. 126 127 This driver can also be built as a module. If so, the module 128 will be called mpc5xxx_can. 129 |
|
| 48config CAN_DEBUG_DEVICES 49 bool "CAN devices debugging messages" 50 depends on CAN 51 default N 52 ---help--- 53 Say Y here if you want the CAN device drivers to produce a bunch of 54 debug messages to the system log. Select this if you are having 55 a problem with CAN support and want to see more of what is going 56 on. 57 58endmenu | 130config CAN_DEBUG_DEVICES 131 bool "CAN devices debugging messages" 132 depends on CAN 133 default N 134 ---help--- 135 Say Y here if you want the CAN device drivers to produce a bunch of 136 debug messages to the system log. Select this if you are having 137 a problem with CAN support and want to see more of what is going 138 on. 139 140endmenu |