xref: /titanic_52/usr/src/uts/sun4u/opl/io/oplkmdrv.c (revision 6e375c8351497b82ffa4f33cbf61d712999b4605)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 
27 /*
28  * OPL IPSec Key Management Driver.
29  *
30  * This driver runs on a OPL Domain. It processes requests received
31  * from the OPL Service Processor (SP) via mailbox message. It passes
32  * these requests to the sckmd daemon by means of an /ioctl interface.
33  *
34  * Requests received from the SP consist of IPsec security associations
35  * (SAs) needed to secure the communication between SC and Domain daemons
36  * communicating using DSCP.
37  */
38 
39 #include <sys/types.h>
40 #include <sys/cmn_err.h>
41 #include <sys/kmem.h>
42 #include <sys/errno.h>
43 #include <sys/file.h>
44 #include <sys/open.h>
45 #include <sys/stat.h>
46 #include <sys/conf.h>
47 #include <sys/ddi.h>
48 #include <sys/cmn_err.h>
49 #include <sys/sunddi.h>
50 #include <sys/sunndi.h>
51 #include <sys/ddi_impldefs.h>
52 #include <sys/ndi_impldefs.h>
53 #include <sys/modctl.h>
54 #include <sys/disp.h>
55 #include <sys/note.h>
56 #include <sys/byteorder.h>
57 #include <sys/sdt.h>
58 
59 #include <sys/scfd/scfdscpif.h>
60 #include <sys/oplkm_msg.h>
61 #include <sys/sckm_io.h>
62 #include <sys/oplkm.h>
63 
64 #define	OKM_NODENAME	"oplkmdrv"		/* Node name */
65 #define	OKM_TARGET_ID	0			/* Target ID */
66 #define	OKM_SM_TOUT	5000			/* small timeout (5msec) */
67 #define	OKM_LG_TOUT	50000			/* large timeout (50msec) */
68 #define	OKM_MB_TOUT	10000000		/* Mailbox timeout (10sec) */
69 
70 okms_t okms_global;				/* Global instance structure */
71 
72 #ifdef DEBUG
73 uint32_t okm_debug = DBG_WARN;
74 #endif
75 
76 /*
77  * Prototypes for the module related functions.
78  */
79 int okm_attach(dev_info_t *devi, ddi_attach_cmd_t cmd);
80 int okm_detach(dev_info_t *devi, ddi_detach_cmd_t cmd);
81 int okm_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result);
82 int okm_open(dev_t *devp, int flag, int otyp, struct cred *cred);
83 int okm_close(dev_t dev, int flag, int otyp, struct cred *cred);
84 int okm_ioctl(dev_t dev, int cmd, intptr_t data, int flag,
85 		cred_t *cred, int *rvalp);
86 
87 /*
88  * Prototypes for the internal functions.
89  */
90 int okm_get_req(okms_t *okmsp, sckm_ioctl_getreq_t *ireqp,
91     intptr_t data, int flag);
92 int okm_process_req(okms_t *okmsp, okm_req_hdr_t *reqp, uint32_t len,
93     sckm_ioctl_getreq_t *ireqp, intptr_t data, int flag);
94 int okm_process_status(okms_t *okmsp, sckm_ioctl_status_t *ireply);
95 void okm_event_handler(scf_event_t event, void *arg);
96 int okm_send_reply(okms_t *okmsp, uint32_t transid, uint32_t status,
97     uint32_t sadb_err, uint32_t sadb_ver);
98 int block_until_ready(okms_t *okmsp);
99 static int okm_copyin_ioctl_getreq(intptr_t userarg,
100     sckm_ioctl_getreq_t *driverarg, int flag);
101 static int okm_copyout_ioctl_getreq(sckm_ioctl_getreq_t *driverarg,
102     intptr_t userarg, int flag);
103 static void okm_cleanup(okms_t *okmsp);
104 static int okm_mbox_init(okms_t *okmsp);
105 static void okm_mbox_fini(okms_t *okmsp);
106 static clock_t okm_timeout_val(int error);
107 
108 
109 struct cb_ops okm_cb_ops = {
110 	okm_open,		/* open */
111 	okm_close,		/* close */
112 	nodev,			/* strategy */
113 	nodev,			/* print */
114 	nodev,			/* dump */
115 	nodev,			/* read */
116 	nodev,			/* write */
117 	okm_ioctl,		/* ioctl */
118 	nodev,			/* devmap */
119 	nodev,			/* mmap */
120 	nodev,			/* segmap */
121 	nochpoll,		/* poll */
122 	ddi_prop_op,		/* prop_op */
123 	0,			/* streamtab  */
124 	D_NEW | D_MP		/* Driver compatibility flag */
125 };
126 
127 struct dev_ops okm_ops = {
128 	DEVO_REV,		/* devo_rev, */
129 	0,			/* refcnt  */
130 	okm_info,		/* get_dev_info */
131 	nulldev,		/* identify */
132 	nulldev,		/* probe */
133 	okm_attach,		/* attach */
134 	okm_detach,		/* detach */
135 	nodev,			/* reset */
136 	&okm_cb_ops,		/* driver operations */
137 	(struct bus_ops *)0,	/* no bus operations */
138 	NULL,			/* power */
139 	ddi_quiesce_not_needed,		/* quiesce */
140 };
141 
142 struct modldrv modldrv = {
143 	&mod_driverops,
144 	"OPL Key Management Driver",
145 	&okm_ops,
146 };
147 
148 struct modlinkage modlinkage = {
149 	MODREV_1,
150 	&modldrv,
151 	NULL
152 };
153 
154 
155 /*
156  * _init - Module's init routine.
157  */
158 int
159 _init(void)
160 {
161 	int ret;
162 
163 	if ((ret = mod_install(&modlinkage)) != 0) {
164 		cmn_err(CE_WARN, "mod_install failed, error = %d", ret);
165 	}
166 	return (ret);
167 }
168 
169 /*
170  * _fini - Module's fini routine.
171  */
172 int
173 _fini(void)
174 {
175 	int ret;
176 
177 	if ((ret = mod_remove(&modlinkage)) != 0) {
178 		return (ret);
179 	}
180 	return (ret);
181 }
182 
183 /*
184  * _info - Module's info routine.
185  */
186 int
187 _info(struct modinfo *modinfop)
188 {
189 	return (mod_info(&modlinkage, modinfop));
190 }
191 
192 /*
193  * okm_attach - Module's attach routine.
194  *
195  * Description:	Initializes the modules state structure and create
196  *		the minor device node.
197  */
198 int
199 okm_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
200 {
201 	int instance;
202 	okms_t *okmsp = &okms_global;
203 
204 	instance = ddi_get_instance(dip);
205 
206 	/* Only one instance is supported.  */
207 	if (instance != 0) {
208 		return (DDI_FAILURE);
209 	}
210 
211 	if (cmd != DDI_ATTACH) {
212 		return (DDI_FAILURE);
213 	}
214 
215 	okmsp->km_dip = dip;
216 	okmsp->km_major = ddi_driver_major(dip);
217 	okmsp->km_inst = instance;
218 
219 	/*
220 	 * Get an interrupt block cookie corresponding to the
221 	 * interrupt priority of the event handler.
222 	 * Assert that the event priority is not redefined to
223 	 * some other priority.
224 	 */
225 	/* LINTED */
226 	ASSERT(SCF_EVENT_PRI == DDI_SOFTINT_LOW);
227 	if (ddi_get_soft_iblock_cookie(dip, SCF_EVENT_PRI,
228 	    &okmsp->km_ibcookie) != DDI_SUCCESS) {
229 		cmn_err(CE_WARN, "ddi_get_soft_iblock_cookie failed.");
230 		return (DDI_FAILURE);
231 	}
232 	mutex_init(&okmsp->km_lock, NULL, MUTEX_DRIVER,
233 	    (void *)okmsp->km_ibcookie);
234 	okmsp->km_clean |= OKM_CLEAN_LOCK;
235 	cv_init(&okmsp->km_wait, NULL, CV_DRIVER, NULL);
236 	okmsp->km_clean |= OKM_CLEAN_CV;
237 
238 	/*
239 	 * set clean_node ahead as remove_node has to be called even
240 	 * if create node fails.
241 	 */
242 	okmsp->km_clean |= OKM_CLEAN_NODE;
243 	if (ddi_create_minor_node(dip, OKM_NODENAME, S_IFCHR,
244 	    instance, NULL, NULL) == DDI_FAILURE) {
245 		cmn_err(CE_WARN, "Device node creation failed");
246 		okm_cleanup(okmsp);
247 		return (DDI_FAILURE);
248 	}
249 
250 	ddi_set_driver_private(dip, (caddr_t)okmsp);
251 	ddi_report_dev(dip);
252 	return (DDI_SUCCESS);
253 }
254 
255 /*
256  * okm_detach - Module's detach routine.
257  *
258  * Description:	Cleans up the module's state structures and any other
259  *		relevant data.
260  */
261 int
262 okm_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
263 {
264 	okms_t *okmsp;
265 
266 	if (cmd != DDI_DETACH) {
267 		return (DDI_FAILURE);
268 	}
269 
270 	if ((okmsp = ddi_get_driver_private(dip)) == NULL) {
271 		return (DDI_FAILURE);
272 	}
273 
274 	mutex_enter(&okmsp->km_lock);
275 	/*
276 	 * Check if the mailbox is still in use.
277 	 */
278 	if (okmsp->km_state & OKM_MB_INITED) {
279 		mutex_exit(&okmsp->km_lock);
280 		cmn_err(CE_WARN, "Detach failure: Mailbox in use");
281 		return (DDI_FAILURE);
282 	}
283 	mutex_exit(&okmsp->km_lock);
284 	okm_cleanup(okmsp);
285 	ddi_set_driver_private(dip, NULL);
286 	return (DDI_SUCCESS);
287 }
288 
289 /*
290  * okm_info - Module's info routine.
291  */
292 /* ARGSUSED */
293 int
294 okm_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
295 {
296 	okms_t	*okmsp;
297 	minor_t	minor;
298 	int	ret = DDI_FAILURE;
299 
300 	switch (infocmd) {
301 	case DDI_INFO_DEVT2DEVINFO:
302 		minor = getminor((dev_t)arg);
303 		okmsp = ddi_get_driver_private(dip);
304 		if (okmsp == NULL) {
305 			*result = NULL;
306 		} else {
307 			*result = okmsp->km_dip;
308 			ret = DDI_SUCCESS;
309 		}
310 		break;
311 
312 	case DDI_INFO_DEVT2INSTANCE:
313 		minor = getminor((dev_t)arg);
314 		*result = (void *)(uintptr_t)minor;
315 		ret = DDI_SUCCESS;
316 
317 	default:
318 		break;
319 	}
320 	return (ret);
321 }
322 
323 /*
324  * okm_open - Device open routine.
325  *
326  * Description:	Initializes the mailbox and waits until the mailbox
327  *		gets connected. Only one open at a time is supported.
328  */
329 /*ARGSUSED*/
330 int
331 okm_open(dev_t *devp, int flag, int otyp, struct cred *cred)
332 {
333 	okms_t *okmsp = &okms_global;
334 	int ret = 0;
335 
336 	DPRINTF(DBG_DRV, ("okm_open: called\n"));
337 	mutex_enter(&okmsp->km_lock);
338 	if (okmsp->km_state & OKM_OPENED) {
339 		/* Only one open supported */
340 		mutex_exit(&okmsp->km_lock);
341 		DPRINTF(DBG_WARN, ("okm_open: already opened\n"));
342 		return (EBUSY);
343 	}
344 	okmsp->km_state |= OKM_OPENED;
345 	ret = block_until_ready(okmsp);
346 	if (ret != 0) {
347 		okmsp->km_state &= ~OKM_OPENED;
348 	}
349 	mutex_exit(&okmsp->km_lock);
350 	DPRINTF(DBG_DRV, ("okm_open: ret=%d\n", ret));
351 	return (ret);
352 }
353 
354 /*
355  * block_until_ready - Function to wait until the mailbox is ready to use.
356  *
357  * Description:	It initializes the mailbox and waits for the mailbox
358  *		state to transition to connected.
359  */
360 int
361 block_until_ready(okms_t *okmsp)
362 {
363 	int ret = 0;
364 
365 	DPRINTF(DBG_DRV, ("block_until_ready: called\n"));
366 	ASSERT(MUTEX_HELD(&okmsp->km_lock));
367 
368 	if (okmsp->km_state & OKM_MB_DISC) {
369 		DPRINTF(DBG_DRV, ("block_until_ready: closing the mailbox\n"));
370 		okm_mbox_fini(okmsp);
371 	}
372 	if (okmsp->km_state & OKM_MB_CONN) {
373 		DPRINTF(DBG_DRV, ("block_until_ready: mailbox connected\n"));
374 		return (0);
375 	}
376 	/*
377 	 * Initialize mailbox.
378 	 */
379 	if ((ret = okm_mbox_init(okmsp)) != 0) {
380 		DPRINTF(DBG_MBOX,
381 		    ("block_until_ready: mailbox init failed ret=%d\n", ret));
382 		return (ret);
383 	}
384 	DPRINTF(DBG_DRV, ("block_until_ready: ret=%d", ret));
385 	return (ret);
386 }
387 
388 /*
389  * okm_close - Device close routine.
390  *
391  * Description: Closes the mailbox.
392  */
393 /*ARGSUSED*/
394 int
395 okm_close(dev_t dev, int flag, int otyp, struct cred *cred)
396 {
397 	okms_t *okmsp = &okms_global;
398 
399 	DPRINTF(DBG_DRV, ("okm_close: called\n"));
400 	/* Close the lower layer first */
401 	mutex_enter(&okmsp->km_lock);
402 	okm_mbox_fini(okmsp);
403 	okmsp->km_state = 0;
404 	mutex_exit(&okmsp->km_lock);
405 	return (0);
406 }
407 
408 
409 /*
410  * okm_ioctl - Device ioctl routine.
411  *
412  * Description:	Processes ioctls from the daemon.
413  */
414 /*ARGSUSED*/
415 int
416 okm_ioctl(dev_t dev, int cmd, intptr_t data, int flag, cred_t *cred, int *rvalp)
417 {
418 	okms_t *okmsp = &okms_global;
419 	sckm_ioctl_getreq_t ireq;
420 	sckm_ioctl_status_t istatus;
421 	int ret = 0;
422 
423 	switch (cmd) {
424 	case SCKM_IOCTL_GETREQ:
425 
426 		DPRINTF(DBG_DRV, ("okm_ioctl: GETREQ\n"));
427 		if (okm_copyin_ioctl_getreq(data, &ireq, flag)) {
428 			return (EFAULT);
429 		}
430 
431 		ret = okm_get_req(okmsp, &ireq, data, flag);
432 		DPRINTF(DBG_DRV, ("okm_ioctl: GETREQ ret=%d\n", ret));
433 		break;
434 
435 	case SCKM_IOCTL_STATUS:
436 
437 		DPRINTF(DBG_DRV, ("okm_ioctl: STATUS\n"));
438 		if (ddi_copyin((caddr_t)data, &istatus,
439 		    sizeof (sckm_ioctl_status_t), flag)) {
440 			return (EFAULT);
441 		}
442 		ret = okm_process_status(okmsp, &istatus);
443 		DPRINTF(DBG_DRV, ("okm_ioctl: STATUS ret=%d\n", ret));
444 		break;
445 
446 	default:
447 		DPRINTF(DBG_DRV, ("okm_ioctl: UNKNOWN ioctl\n"));
448 		ret = EINVAL;
449 	}
450 	return (ret);
451 }
452 
453 /*
454  * okm_get_req - Get a request from the mailbox.
455  *
456  * Description:	It blocks until a message is received, then processes
457  *		the message and returns it to the requestor.
458  */
459 int
460 okm_get_req(okms_t *okmsp, sckm_ioctl_getreq_t *ireqp, intptr_t data, int flag)
461 {
462 	okm_req_hdr_t *reqp;
463 	caddr_t msgbuf;
464 	uint32_t len;
465 	int ret;
466 
467 	DPRINTF(DBG_DRV, ("okm_getreq: called\n"));
468 	mutex_enter(&okmsp->km_lock);
469 	if ((ret = block_until_ready(okmsp)) != 0) {
470 		mutex_exit(&okmsp->km_lock);
471 		DPRINTF(DBG_WARN, ("okm_getreq: failed ret=%d\n", ret));
472 		return (ret);
473 	}
474 
475 	if (okmsp->km_reqp != NULL) {
476 		DPRINTF(DBG_DRV, ("okm_getreq: req cached\n"));
477 		reqp = okmsp->km_reqp;
478 		len = okmsp->km_reqlen;
479 		okmsp->km_reqp = NULL;
480 		okmsp->km_reqlen = 0;
481 	} else {
482 retry:
483 		while (OKM_MBOX_READY(okmsp) &&
484 		    ((ret = scf_mb_canget(okmsp->km_target,
485 		    okmsp->km_key, &len)) != 0)) {
486 			if (ret != ENOMSG) {
487 				DPRINTF(DBG_WARN, ("okm_getreq: Unknown "
488 				    "mbox failure=%d\n", ret));
489 				mutex_exit(&okmsp->km_lock);
490 				return (EIO);
491 			}
492 			DPRINTF(DBG_MBOX, ("okm_getreq: waiting for mesg\n"));
493 			if (cv_wait_sig(&okmsp->km_wait,
494 			    &okmsp->km_lock) <= 0) {
495 				mutex_exit(&okmsp->km_lock);
496 				DPRINTF(DBG_DRV, ("okm_getreq:interrupted\n"));
497 				return (EINTR);
498 			}
499 		}
500 		if (!OKM_MBOX_READY(okmsp)) {
501 			mutex_exit(&okmsp->km_lock);
502 			DPRINTF(DBG_WARN, ("okm_getreq: mailbox not ready\n"));
503 			return (EIO);
504 		}
505 		ASSERT(len != 0);
506 		msgbuf = kmem_alloc(len, KM_SLEEP);
507 		okmsp->km_sg_rcv.msc_dptr = msgbuf;
508 		okmsp->km_sg_rcv.msc_len = len;
509 
510 		DPRINTF(DBG_MBOX, ("okm_getreq: getmsg\n"));
511 		ret = scf_mb_getmsg(okmsp->km_target, okmsp->km_key, len, 1,
512 		    &okmsp->km_sg_rcv, 0);
513 		if (ret == ENOMSG || ret == EMSGSIZE) {
514 			kmem_free(msgbuf, len);
515 			DPRINTF(DBG_MBOX, ("okm_getreq: nomsg ret=%d\n", ret));
516 			goto retry;
517 		} else if (ret != 0) {
518 			kmem_free(msgbuf, len);
519 			mutex_exit(&okmsp->km_lock);
520 			DPRINTF(DBG_WARN,
521 			    ("okm_getreq: Unknown mbox failure=%d\n", ret));
522 			return (EIO);
523 		}
524 
525 		/* check message length */
526 		if (len < sizeof (okm_req_hdr_t)) {
527 			/* protocol error, drop message */
528 			kmem_free(msgbuf, len);
529 			mutex_exit(&okmsp->km_lock);
530 			DPRINTF(DBG_WARN, ("okm_getreq: Bad message\n"));
531 			return (EBADMSG);
532 		}
533 
534 		reqp = (okm_req_hdr_t *)msgbuf;
535 		reqp->krq_version = ntohl(reqp->krq_version);
536 		reqp->krq_transid = ntohl(reqp->krq_transid);
537 		reqp->krq_cmd = ntohl(reqp->krq_cmd);
538 		reqp->krq_reserved = ntohl(reqp->krq_reserved);
539 
540 		/* check version of the message received */
541 		if (reqp->krq_version != OKM_PROTOCOL_VERSION) {
542 			okm_send_reply(okmsp, reqp->krq_transid,
543 			    OKM_ERR_VERSION, 0, 0);
544 			kmem_free(msgbuf, len);
545 			mutex_exit(&okmsp->km_lock);
546 			DPRINTF(DBG_WARN, ("okm_getreq: Unknown version=%d\n",
547 			    reqp->krq_version));
548 			return (EBADMSG);
549 		}
550 	}
551 
552 	/* process message */
553 	ret = okm_process_req(okmsp, reqp, len, ireqp, data, flag);
554 	if (okmsp->km_reqp == NULL) {
555 		/*
556 		 * The message is not saved, so free the buffer.
557 		 */
558 		kmem_free(reqp, len);
559 	}
560 	mutex_exit(&okmsp->km_lock);
561 	DPRINTF(DBG_DRV, ("okm_getreq: ret=%d\n", ret));
562 	return (ret);
563 }
564 
565 
566 /*
567  * okm_process_req - Process the request.
568  *
569  * Description:	Validate the request and then give the request to the
570  *		daemon.
571  */
572 int
573 okm_process_req(okms_t *okmsp, okm_req_hdr_t *reqp, uint32_t len,
574     sckm_ioctl_getreq_t *ireqp, intptr_t data, int flag)
575 {
576 	void *req_datap = (void *)(((char *)reqp) + sizeof (okm_req_hdr_t));
577 	int sadb_msglen = len - sizeof (okm_req_hdr_t);
578 
579 	DPRINTF(DBG_DRV, ("okm_process_req: called\n"));
580 	DUMP_REQ(reqp, len);
581 
582 	switch (reqp->krq_cmd) {
583 	case OKM_MSG_SADB:
584 		/* sanity check request */
585 		if (sadb_msglen <= 0) {
586 			okm_send_reply(okmsp, reqp->krq_transid,
587 			    OKM_ERR_SADB_MSG, 0, 0);
588 			DPRINTF(DBG_WARN, ("okm_process_req: bad message\n"));
589 			return (EBADMSG);
590 		}
591 
592 		/*
593 		 * Save the message, prior to giving it to the daemon.
594 		 */
595 		okmsp->km_reqp = reqp;
596 		okmsp->km_reqlen = len;
597 
598 		if (ireqp->buf_len < len) {
599 			DPRINTF(DBG_WARN,
600 			    ("okm_process_req: not enough space\n"));
601 			return (ENOSPC);
602 		}
603 
604 		ireqp->transid = reqp->krq_transid;
605 		ireqp->type = SCKM_IOCTL_REQ_SADB;
606 		if (ddi_copyout(req_datap, ireqp->buf, sadb_msglen, flag)) {
607 			DPRINTF(DBG_WARN,
608 			    ("okm_process_req: copyout failed\n"));
609 			return (EFAULT);
610 		}
611 		ireqp->buf_len = sadb_msglen;
612 		if (okm_copyout_ioctl_getreq(ireqp, data, flag)) {
613 			DPRINTF(DBG_WARN,
614 			    ("okm_process_req: copyout failed\n"));
615 			return (EFAULT);
616 		}
617 		break;
618 
619 	default:
620 		cmn_err(CE_WARN, "Unknown cmd 0x%x received", reqp->krq_cmd);
621 		/*
622 		 * Received an unknown command, send corresponding
623 		 * error message.
624 		 */
625 		okm_send_reply(okmsp, reqp->krq_transid, OKM_ERR_BAD_CMD, 0, 0);
626 		return (EBADMSG);
627 	}
628 	DPRINTF(DBG_DRV, ("okm_process_req: ret=0\n"));
629 	return (0);
630 }
631 
632 /*
633  * okm_process_status - Process the status from the daemon.
634  *
635  * Description:	Processes the status received from the daemon and sends
636  *		corresponding message to the SP.
637  */
638 int
639 okm_process_status(okms_t *okmsp, sckm_ioctl_status_t *ireply)
640 {
641 	uint32_t status;
642 	uint32_t sadb_msg_errno = 0;
643 	uint32_t sadb_msg_version = 0;
644 	okm_req_hdr_t *reqp = okmsp->km_reqp;
645 	int ret;
646 
647 	DPRINTF(DBG_DRV, ("okm_process_status: called\n"));
648 	mutex_enter(&okmsp->km_lock);
649 	if ((ret = block_until_ready(okmsp)) != 0) {
650 		mutex_exit(&okmsp->km_lock);
651 		DPRINTF(DBG_WARN,
652 		    ("okm_process_status: Unknown failure=%d\n", ret));
653 		return (ret);
654 	}
655 
656 	/* fail if no status is expected, or if it does not match */
657 	if (!okmsp->km_reqp || (reqp->krq_transid != ireply->transid)) {
658 		mutex_exit(&okmsp->km_lock);
659 		DPRINTF(DBG_WARN,
660 		    ("okm_process_status: req/transid mismatch\n"));
661 		return (EINVAL);
662 	}
663 
664 	switch (ireply->status) {
665 	case SCKM_IOCTL_STAT_SUCCESS:
666 		DPRINTF(DBG_DRV, ("okm_process_status: SUCCESS\n"));
667 		status = OKM_SUCCESS;
668 		break;
669 	case SCKM_IOCTL_STAT_ERR_PFKEY:
670 		DPRINTF(DBG_DRV, ("okm_process_status: PFKEY ERROR\n"));
671 		status = OKM_ERR_SADB_PFKEY;
672 		sadb_msg_errno = ireply->sadb_msg_errno;
673 		break;
674 	case SCKM_IOCTL_STAT_ERR_REQ:
675 		DPRINTF(DBG_DRV, ("okm_process_status: REQ ERROR\n"));
676 		status = OKM_ERR_DAEMON;
677 		break;
678 	case SCKM_IOCTL_STAT_ERR_VERSION:
679 		DPRINTF(DBG_DRV, ("okm_process_status: SADB VERSION ERROR\n"));
680 		status = OKM_ERR_SADB_VERSION;
681 		sadb_msg_version = ireply->sadb_msg_version;
682 		break;
683 	case SCKM_IOCTL_STAT_ERR_TIMEOUT:
684 		DPRINTF(DBG_DRV, ("okm_process_status: TIMEOUT ERR\n"));
685 		status = OKM_ERR_SADB_TIMEOUT;
686 		break;
687 	case SCKM_IOCTL_STAT_ERR_OTHER:
688 		DPRINTF(DBG_DRV, ("okm_process_status: OTHER ERR\n"));
689 		status = OKM_ERR_DAEMON;
690 		break;
691 	case SCKM_IOCTL_STAT_ERR_SADB_TYPE:
692 		DPRINTF(DBG_DRV, ("okm_process_status: SADB TYPE ERR\n"));
693 		status = OKM_ERR_SADB_BAD_TYPE;
694 		break;
695 	default:
696 		cmn_err(CE_WARN, "SCKM daemon returned invalid status %d\n",
697 		    ireply->status);
698 		status = OKM_ERR_DAEMON;
699 	}
700 	ret = okm_send_reply(okmsp, ireply->transid, status,
701 	    sadb_msg_errno, sadb_msg_version);
702 	/*
703 	 * Clean up the cached request now.
704 	 */
705 	if (ret == 0) {
706 		kmem_free(okmsp->km_reqp, okmsp->km_reqlen);
707 		okmsp->km_reqp = NULL;
708 		okmsp->km_reqlen = 0;
709 	}
710 	mutex_exit(&okmsp->km_lock);
711 	DPRINTF(DBG_DRV, ("okm_process_status: ret=%d\n", ret));
712 	return (ret);
713 }
714 
715 /*
716  * okm_copyin_ioctl_getreq - copy-in the ioctl request from the daemon.
717  */
718 
719 static int
720 okm_copyin_ioctl_getreq(intptr_t userarg, sckm_ioctl_getreq_t *driverarg,
721     int flag)
722 {
723 #ifdef _MULTI_DATAMODEL
724 	switch (ddi_model_convert_from(flag & FMODELS)) {
725 	case DDI_MODEL_ILP32: {
726 		sckm_ioctl_getreq32_t driverarg32;
727 		if (ddi_copyin((caddr_t)userarg, &driverarg32,
728 		    sizeof (sckm_ioctl_getreq32_t), flag)) {
729 			return (EFAULT);
730 		}
731 		driverarg->transid = driverarg32.transid;
732 		driverarg->type = driverarg32.type;
733 		driverarg->buf = (caddr_t)(uintptr_t)driverarg32.buf;
734 		driverarg->buf_len = driverarg32.buf_len;
735 		break;
736 	}
737 	case DDI_MODEL_NONE: {
738 		if (ddi_copyin((caddr_t)userarg, &driverarg,
739 		    sizeof (sckm_ioctl_getreq_t), flag)) {
740 			return (EFAULT);
741 		}
742 		break;
743 	}
744 	}
745 #else /* ! _MULTI_DATAMODEL */
746 	if (ddi_copyin((caddr_t)userarg, &driverarg,
747 	    sizeof (sckm_ioctl_getreq_t), flag)) {
748 		return (EFAULT);
749 	}
750 #endif /* _MULTI_DATAMODEL */
751 	return (0);
752 }
753 
754 
755 /*
756  * okm_copyout_ioctl_getreq - copy-out the request to the daemon.
757  */
758 static int
759 okm_copyout_ioctl_getreq(sckm_ioctl_getreq_t *driverarg, intptr_t userarg,
760     int flag)
761 {
762 #ifdef _MULTI_DATAMODEL
763 	switch (ddi_model_convert_from(flag & FMODELS)) {
764 	case DDI_MODEL_ILP32: {
765 		sckm_ioctl_getreq32_t driverarg32;
766 		driverarg32.transid = driverarg->transid;
767 		driverarg32.type = driverarg->type;
768 		driverarg32.buf = (caddr32_t)(uintptr_t)driverarg->buf;
769 		driverarg32.buf_len = driverarg->buf_len;
770 		if (ddi_copyout(&driverarg32, (caddr_t)userarg,
771 		    sizeof (sckm_ioctl_getreq32_t), flag)) {
772 			return (EFAULT);
773 		}
774 		break;
775 	}
776 	case DDI_MODEL_NONE:
777 		if (ddi_copyout(driverarg, (caddr_t)userarg,
778 		    sizeof (sckm_ioctl_getreq_t), flag)) {
779 			return (EFAULT);
780 		}
781 		break;
782 	}
783 #else /* ! _MULTI_DATAMODEL */
784 	if (ddi_copyout(driverarg, (caddr_t)userarg,
785 	    sizeof (sckm_ioctl_getreq_t), flag)) {
786 		return (EFAULT);
787 	}
788 #endif /* _MULTI_DATAMODEL */
789 	return (0);
790 }
791 
792 /*
793  * okm_cleanup - Cleanup routine.
794  */
795 static void
796 okm_cleanup(okms_t *okmsp)
797 {
798 
799 	ASSERT(okmsp != NULL);
800 	if (okmsp->km_clean & OKM_CLEAN_NODE) {
801 		ddi_remove_minor_node(okmsp->km_dip, NULL);
802 	}
803 	if (okmsp->km_clean & OKM_CLEAN_LOCK)
804 		mutex_destroy(&okmsp->km_lock);
805 	if (okmsp->km_clean & OKM_CLEAN_CV)
806 		cv_destroy(&okmsp->km_wait);
807 	if (okmsp->km_reqp != NULL) {
808 		kmem_free(okmsp->km_reqp, okmsp->km_reqlen);
809 		okmsp->km_reqp = NULL;
810 		okmsp->km_reqlen = 0;
811 	}
812 	ddi_set_driver_private(okmsp->km_dip, NULL);
813 }
814 
815 /*
816  * okm_mbox_init - Mailbox specific initialization.
817  */
818 static int
819 okm_mbox_init(okms_t *okmsp)
820 {
821 	int ret;
822 	clock_t tout;
823 
824 	ASSERT(MUTEX_HELD(&okmsp->km_lock));
825 	okmsp->km_target = OKM_TARGET_ID;
826 	okmsp->km_key = DKMD_KEY;
827 	okmsp->km_state &= ~OKM_MB_INITED;
828 
829 	/* Iterate until mailbox gets connected */
830 	while (!(okmsp->km_state & OKM_MB_CONN)) {
831 		DPRINTF(DBG_MBOX, ("okm_mbox_init: calling mb_init\n"));
832 		ret = scf_mb_init(okmsp->km_target, okmsp->km_key,
833 		    okm_event_handler, (void *)okmsp);
834 		DPRINTF(DBG_MBOX, ("okm_mbox_init: mb_init ret=%d\n", ret));
835 
836 		if (ret != 0) {
837 			DPRINTF(DBG_MBOX,
838 			    ("okm_mbox_init: failed ret =%d\n", ret));
839 			DTRACE_PROBE1(okm_mbox_fail, int, ret);
840 		} else {
841 			okmsp->km_state |= OKM_MB_INITED;
842 
843 			/* Block until the mailbox is ready to communicate. */
844 			while (!(okmsp->km_state &
845 			    (OKM_MB_CONN | OKM_MB_DISC))) {
846 
847 				if (cv_wait_sig(&okmsp->km_wait,
848 				    &okmsp->km_lock) <= 0) {
849 					/* interrupted */
850 					ret = EINTR;
851 					break;
852 				}
853 			}
854 		}
855 
856 		if ((ret != 0) || (okmsp->km_state & OKM_MB_DISC)) {
857 
858 			if (okmsp->km_state & OKM_MB_INITED) {
859 				(void) scf_mb_fini(okmsp->km_target,
860 				    okmsp->km_key);
861 			}
862 			if (okmsp->km_state & OKM_MB_DISC) {
863 				DPRINTF(DBG_WARN,
864 				    ("okm_mbox_init: mbox DISC_ERROR\n"));
865 				DTRACE_PROBE1(okm_mbox_fail,
866 				    int, OKM_MB_DISC);
867 			}
868 
869 			okmsp->km_state &= ~(OKM_MB_INITED | OKM_MB_DISC |
870 			    OKM_MB_CONN);
871 
872 			if (ret == EINTR) {
873 				return (ret);
874 			}
875 
876 			/*
877 			 * If there was failure, then wait for
878 			 * OKM_MB_TOUT secs and retry again.
879 			 */
880 
881 			DPRINTF(DBG_MBOX, ("okm_mbox_init: waiting...\n"));
882 			tout = ddi_get_lbolt() + drv_usectohz(OKM_MB_TOUT);
883 			ret = cv_timedwait_sig(&okmsp->km_wait,
884 			    &okmsp->km_lock, tout);
885 			if (ret == 0) {
886 				/* if interrupted, return immediately. */
887 				DPRINTF(DBG_MBOX,
888 				    ("okm_mbox_init: interrupted\n"));
889 				return (EINTR);
890 			}
891 		}
892 	}
893 
894 	ret = scf_mb_ctrl(okmsp->km_target, okmsp->km_key,
895 	    SCF_MBOP_MAXMSGSIZE, &okmsp->km_maxsz);
896 
897 	/*
898 	 * The max msg size should be at least the size of reply
899 	 * we need to send.
900 	 */
901 	if ((ret == 0) && (okmsp->km_maxsz < sizeof (okm_rep_hdr_t))) {
902 		cmn_err(CE_WARN, "Max message size expected >= %ld "
903 		    "but found %d\n", sizeof (okm_rep_hdr_t), okmsp->km_maxsz);
904 		ret = EIO;
905 	}
906 	if (ret != 0) {
907 		okmsp->km_state &= ~OKM_MB_INITED;
908 		(void) scf_mb_fini(okmsp->km_target, okmsp->km_key);
909 	}
910 	DPRINTF(DBG_MBOX, ("okm_mbox_init: mb_init ret=%d\n", ret));
911 	return (ret);
912 }
913 
914 /*
915  * okm_mbox_fini - Mailbox de-initialization.
916  */
917 static void
918 okm_mbox_fini(okms_t *okmsp)
919 {
920 	int ret = 0;
921 
922 	ASSERT(MUTEX_HELD(&okmsp->km_lock));
923 	if (okmsp->km_state & OKM_MB_INITED) {
924 		DPRINTF(DBG_MBOX, ("okm_mbox_fini: calling mb_fini\n"));
925 		ret = scf_mb_fini(okmsp->km_target, okmsp->km_key);
926 		DPRINTF(DBG_MBOX, ("okm_mbox_fini: mb_fini ret=%d\n", ret));
927 		if (ret != 0) {
928 			cmn_err(CE_WARN,
929 			    "Failed to close the Mailbox error=%d", ret);
930 		}
931 		okmsp->km_state &= ~(OKM_MB_INITED | OKM_MB_CONN | OKM_MB_DISC);
932 	}
933 }
934 
935 /*
936  * okm_event_handler - Mailbox event handler.
937  *
938  * Description:	Implements a state machine to handle all the mailbox
939  *		events. For each event, it sets the appropriate state
940  *		flag and wakes up the threads waiting for that event.
941  */
942 void
943 okm_event_handler(scf_event_t event, void *arg)
944 {
945 	okms_t *okmsp = (okms_t *)arg;
946 
947 	DPRINTF(DBG_MBOX, ("okm_event_handler: called\n"));
948 	ASSERT(okmsp != NULL);
949 	mutex_enter(&okmsp->km_lock);
950 	if (!(okmsp->km_state & OKM_MB_INITED)) {
951 		/*
952 		 * Ignore all events if the state flag indicates that the
953 		 * mailbox not initialized, this may happen during the close.
954 		 */
955 		mutex_exit(&okmsp->km_lock);
956 		DPRINTF(DBG_MBOX,
957 		    ("okm_event_handler: event=0x%X - mailbox not inited \n",
958 		    event));
959 		return;
960 	}
961 	switch (event) {
962 	case SCF_MB_CONN_OK:
963 		DPRINTF(DBG_MBOX, ("okm_event_handler: Event CONN_OK\n"));
964 		/*
965 		 * Now the mailbox is ready to use, lets wake up
966 		 * any one waiting for this event.
967 		 */
968 		okmsp->km_state |= OKM_MB_CONN;
969 		cv_broadcast(&okmsp->km_wait);
970 		break;
971 
972 	case SCF_MB_MSG_DATA:
973 		DPRINTF(DBG_MBOX, ("okm_event_handler: Event MSG_DATA\n"));
974 		/*
975 		 * A message is available in the mailbox,
976 		 * wakeup if any one is ready to read the message.
977 		 */
978 		if (OKM_MBOX_READY(okmsp)) {
979 			cv_broadcast(&okmsp->km_wait);
980 		}
981 		break;
982 
983 	case SCF_MB_SPACE:
984 		DPRINTF(DBG_MBOX, ("okm_event_handler: Event MB_SPACE\n"));
985 		/*
986 		 * Now the mailbox is ready to transmit, lets
987 		 * wakeup if any one is waiting to write.
988 		 */
989 		if (OKM_MBOX_READY(okmsp)) {
990 			cv_broadcast(&okmsp->km_wait);
991 		}
992 		break;
993 	case SCF_MB_DISC_ERROR:
994 		DPRINTF(DBG_MBOX, ("okm_event_handler: Event DISC_ERROR\n"));
995 		okmsp->km_state &= ~OKM_MB_CONN;
996 		okmsp->km_state |= OKM_MB_DISC;
997 		cv_broadcast(&okmsp->km_wait);
998 		break;
999 	default:
1000 		cmn_err(CE_WARN, "Unexpected event received\n");
1001 	}
1002 	mutex_exit(&okmsp->km_lock);
1003 }
1004 
1005 /*
1006  * okm_send_reply - Send a mailbox reply message.
1007  */
1008 int
1009 okm_send_reply(okms_t *okmsp, uint32_t transid,
1010     uint32_t status, uint32_t sadb_err, uint32_t sadb_ver)
1011 {
1012 	okm_rep_hdr_t reply;
1013 	int ret = EIO;
1014 
1015 	DPRINTF(DBG_DRV, ("okm_send_reply: called\n"));
1016 	ASSERT(MUTEX_HELD(&okmsp->km_lock));
1017 	reply.krp_version = htonl(OKM_PROTOCOL_VERSION);
1018 	reply.krp_transid = htonl(transid);
1019 	reply.krp_status = htonl(status);
1020 	reply.krp_sadb_errno = htonl(sadb_err);
1021 	reply.krp_sadb_version = htonl(sadb_ver);
1022 	okmsp->km_sg_tx.msc_dptr = (caddr_t)&reply;
1023 	okmsp->km_sg_tx.msc_len = sizeof (reply);
1024 	DUMP_REPLY(&reply);
1025 
1026 	while (OKM_MBOX_READY(okmsp)) {
1027 		DPRINTF(DBG_MBOX, ("okm_send_reply: sending reply\n"));
1028 		ret = scf_mb_putmsg(okmsp->km_target, okmsp->km_key,
1029 		    sizeof (reply), 1, &okmsp->km_sg_tx, 0);
1030 		DPRINTF(DBG_MBOX, ("okm_send_reply: putmsg ret=%d\n", ret));
1031 		if (ret == EBUSY || ret == ENOSPC) {
1032 			/* mailbox is busy, poll/retry */
1033 			if (cv_timedwait_sig(&okmsp->km_wait,
1034 			    &okmsp->km_lock, okm_timeout_val(ret)) == 0) {
1035 				/* interrupted */
1036 				ret = EINTR;
1037 				DPRINTF(DBG_DRV,
1038 				    ("okm_send_reply: interrupted\n"));
1039 				break;
1040 			}
1041 		} else {
1042 			break;
1043 		}
1044 	}
1045 	DPRINTF(DBG_DRV, ("okm_send_reply: ret=%d\n", ret));
1046 	return (ret);
1047 }
1048 
1049 /*
1050  * okm_timeout_val -- Return appropriate timeout value.
1051  *
1052  * A small timeout value is returned for EBUSY as the mailbox busy
1053  * condition may go away sooner and we are expected to poll.
1054  *
1055  * A larger timeout value is returned for ENOSPC case, as the condition
1056  * depends on the peer to release buffer space.
1057  * NOTE: there will also be an event(SCF_MB_SPACE) but a timeout is
1058  * used for reliability purposes.
1059  */
1060 static clock_t
1061 okm_timeout_val(int error)
1062 {
1063 	clock_t tval;
1064 
1065 	ASSERT(error == EBUSY || error == ENOSPC);
1066 
1067 	if (error == EBUSY) {
1068 		tval = OKM_SM_TOUT;
1069 	} else {
1070 		tval = OKM_LG_TOUT;
1071 	}
1072 	return (drv_usectohz(tval));
1073 }
1074 
1075 #ifdef DEBUG
1076 static void
1077 okm_print_req(okm_req_hdr_t *reqp, uint32_t len)
1078 {
1079 	uint8_t *datap = (uint8_t *)(((char *)reqp) + sizeof (okm_req_hdr_t));
1080 	int msglen = len - sizeof (okm_req_hdr_t);
1081 	int i, j;
1082 #define	BYTES_PER_LINE	20
1083 	char bytestr[BYTES_PER_LINE * 3 + 1];
1084 
1085 	if (!(okm_debug & DBG_MESG))
1086 		return;
1087 	printf("OKM: Request  ver=%d transid=%d cmd=%s\n",
1088 	    reqp->krq_version, reqp->krq_transid,
1089 	    ((reqp->krq_cmd == OKM_MSG_SADB) ? "MSG_SADB" : "UNKNOWN"));
1090 	for (i = 0; i < msglen; ) {
1091 		for (j = 0; (j < BYTES_PER_LINE) && (i < msglen); j++, i++) {
1092 			sprintf(&bytestr[j * 3], "%02X ", datap[i]);
1093 		}
1094 		if (j != 0) {
1095 			printf("\t%s\n", bytestr);
1096 		}
1097 	}
1098 }
1099 
1100 static void
1101 okm_print_rep(okm_rep_hdr_t *repp)
1102 {
1103 	if (!(okm_debug & DBG_MESG))
1104 		return;
1105 	printf("OKM: Reply Ver=%d Transid=%d Status=%d ",
1106 	    repp->krp_version, repp->krp_transid, repp->krp_status);
1107 	printf("Sadb_errno=%d Sadb_ver=%d\n", repp->krp_sadb_errno,
1108 	    repp->krp_sadb_version);
1109 }
1110 #endif
1111