xref: /titanic_52/usr/src/uts/sparc/scsa2usb/Makefile (revision 7d968cb8b4b6274092771b93e94bf88d1ee31c6c)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23# Use is subject to license terms.
24#
25# uts/sparc/scsa2usb/Makefile
26#
27#	This makefile drives the production of the scsa2usb driver
28#	kernel module. sparc architecture dependent
29#
30
31#ident	"%Z%%M%	%I%	%E% SMI"
32
33#
34#	Path to the base of the uts directory tree (usually /usr/src/uts).
35#
36UTSBASE = ../..
37
38#
39#	Define the module and object file sets.
40#
41MODULE		= scsa2usb
42OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
43LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
44ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
45CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
46WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
47WARLOCK_OK	= $(MODULE).ok
48
49#
50#	Include common rules.
51#
52include $(UTSBASE)/sparc/Makefile.sparc
53
54#
55# lint pass one enforcement
56#
57CFLAGS += $(CCVERBOSE)
58
59# depends on misc/usba misc/scsi
60#
61LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
62
63#
64#	Define targets
65#
66ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
67LINT_TARGET	= $(MODULE).lint
68INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
69
70#
71# For now, disable these lint checks; maintainers should endeavor
72# to investigate and remove these for maximum lint coverage.
73# Please do not carry these forward to new Makefiles.
74#
75LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
76LINTTAGS	+= -erroff=E_PTRDIFF_OVERFLOW
77LINTTAGS	+= -erroff=E_ASSIGN_NARROW_CONV
78LINTTAGS	+= -erroff=E_STATIC_UNUSED
79LINTTAGS	+= -erroff=E_SUSPICIOUS_COMPARISON
80
81.KEEP_STATE:
82
83all:		$(ALL_DEPS)
84
85def:		$(DEF_DEPS)
86
87clean:		$(CLEAN_DEPS); \
88                $(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
89
90clobber:	$(CLOBBER_DEPS); \
91		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
92
93lint:		$(LINT_DEPS)
94
95modlintlib:	$(MODLINTLIB_DEPS)
96
97clean.lint:	$(CLEAN_LINT_DEPS)
98
99install:	$(INSTALL_DEPS)
100
101#
102#	Include common targets.
103#
104include $(UTSBASE)/sparc/Makefile.targ
105
106#
107#	Defines for local commands.
108#
109WARLOCK		= warlock
110WLCC		= wlcc
111TOUCH		= touch
112SCCS		= sccs
113TEST		= test
114
115#
116#	lock_lint rules
117#
118WARLOCK_OBJECTS = $(SCSA2USB_OBJS:%.o=%.ll)
119USBA_FILES = $(USBA_OBJS:%.o=../usba/%.ll)
120UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
121OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
122EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
123SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
124ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
125SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
126
127warlock: $(MODULE).ok $(WARLOCK_OBJECTS) warlock_with_usba
128
129%.wlcmd:
130	$(TEST) -f $@ || $(SCCS) get $@
131
132scsa2usb.ok: $(WARLOCK_OBJECTS) scsa2usb.wlcmd warlock_ddi.files \
133	scsi.files
134	$(WARLOCK) -c scsa2usb.wlcmd $(WARLOCK_OBJECTS)  \
135		../warlock/scsi.ll \
136		-l ../warlock/ddi_dki_impl.ll \
137		$(SCSI_FILES)
138	$(TOUCH) $@
139
140%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
141		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
142		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
143		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
144	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
145
146warlock_with_usba: scsa2usb.wlcmd  $(WARLOCK_OBJECTS) usba_files \
147	ohci_files ehci_files uhci_files warlock_ddi.files sd.files st.files
148	$(WARLOCK) -c ./scsa2usb_with_usba.wlcmd \
149		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
150		$(SD_FILES) \
151		$(ST_FILES) \
152		$(SCSI_FILES) \
153		$(WARLOCK_OBJECTS) \
154		-l ../warlock/ddi_dki_impl.ll
155
156usba_files:
157	@cd ../usba;pwd; $(MAKE) warlock
158
159uhci_files:
160	@cd ../uhci;pwd; $(MAKE) warlock
161
162ohci_files:
163	@cd ../ohci;pwd; $(MAKE) warlock
164
165ehci_files:
166	@cd ../ehci;pwd; $(MAKE) warlock
167
168warlock_ddi.files:
169	@cd ../warlock; pwd; $(MAKE) warlock
170
171scsi.files:
172	@cd ../scsi; pwd; $(MAKE) warlock
173
174sd.files:
175	@cd ../sd; pwd; $(MAKE) warlock_alone
176
177st.files:
178	@cd ../st; pwd; $(MAKE) warlock_alone
179