xref: /titanic_52/usr/src/uts/intel/io/acpica/executer/exconfig.c (revision 91d7f85e02991954d1e1bd44673df567ad8dcc87)
1 /******************************************************************************
2  *
3  * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes)
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2011, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #define __EXCONFIG_C__
45 
46 #include "acpi.h"
47 #include "accommon.h"
48 #include "acinterp.h"
49 #include "acnamesp.h"
50 #include "actables.h"
51 #include "acdispat.h"
52 #include "acevents.h"
53 
54 
55 #define _COMPONENT          ACPI_EXECUTER
56         ACPI_MODULE_NAME    ("exconfig")
57 
58 /* Local prototypes */
59 
60 static ACPI_STATUS
61 AcpiExAddTable (
62     UINT32                  TableIndex,
63     ACPI_NAMESPACE_NODE     *ParentNode,
64     ACPI_OPERAND_OBJECT     **DdbHandle);
65 
66 static ACPI_STATUS
67 AcpiExRegionRead (
68     ACPI_OPERAND_OBJECT     *ObjDesc,
69     UINT32                  Length,
70     UINT8                   *Buffer);
71 
72 
73 /*******************************************************************************
74  *
75  * FUNCTION:    AcpiExAddTable
76  *
77  * PARAMETERS:  Table               - Pointer to raw table
78  *              ParentNode          - Where to load the table (scope)
79  *              DdbHandle           - Where to return the table handle.
80  *
81  * RETURN:      Status
82  *
83  * DESCRIPTION: Common function to Install and Load an ACPI table with a
84  *              returned table handle.
85  *
86  ******************************************************************************/
87 
88 static ACPI_STATUS
89 AcpiExAddTable (
90     UINT32                  TableIndex,
91     ACPI_NAMESPACE_NODE     *ParentNode,
92     ACPI_OPERAND_OBJECT     **DdbHandle)
93 {
94     ACPI_OPERAND_OBJECT     *ObjDesc;
95     ACPI_STATUS             Status;
96     ACPI_OWNER_ID           OwnerId;
97 
98 
99     ACPI_FUNCTION_TRACE (ExAddTable);
100 
101 
102     /* Create an object to be the table handle */
103 
104     ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_REFERENCE);
105     if (!ObjDesc)
106     {
107         return_ACPI_STATUS (AE_NO_MEMORY);
108     }
109 
110     /* Init the table handle */
111 
112     ObjDesc->Common.Flags |= AOPOBJ_DATA_VALID;
113     ObjDesc->Reference.Class = ACPI_REFCLASS_TABLE;
114     *DdbHandle = ObjDesc;
115 
116     /* Install the new table into the local data structures */
117 
118     ObjDesc->Reference.Value = TableIndex;
119 
120     /* Add the table to the namespace */
121 
122     Status = AcpiNsLoadTable (TableIndex, ParentNode);
123     if (ACPI_FAILURE (Status))
124     {
125         AcpiUtRemoveReference (ObjDesc);
126         *DdbHandle = NULL;
127         return_ACPI_STATUS (Status);
128     }
129 
130     /* Execute any module-level code that was found in the table */
131 
132     AcpiExExitInterpreter ();
133     AcpiNsExecModuleCodeList ();
134     AcpiExEnterInterpreter ();
135 
136     /*
137      * Update GPEs for any new _Lxx/_Exx methods. Ignore errors. The host is
138      * responsible for discovering any new wake GPEs by running _PRW methods
139      * that may have been loaded by this table.
140      */
141     Status = AcpiTbGetOwnerId (TableIndex, &OwnerId);
142     if (ACPI_SUCCESS (Status))
143     {
144         AcpiEvUpdateGpes (OwnerId);
145     }
146 
147     return_ACPI_STATUS (AE_OK);
148 }
149 
150 
151 /*******************************************************************************
152  *
153  * FUNCTION:    AcpiExLoadTableOp
154  *
155  * PARAMETERS:  WalkState           - Current state with operands
156  *              ReturnDesc          - Where to store the return object
157  *
158  * RETURN:      Status
159  *
160  * DESCRIPTION: Load an ACPI table from the RSDT/XSDT
161  *
162  ******************************************************************************/
163 
164 ACPI_STATUS
165 AcpiExLoadTableOp (
166     ACPI_WALK_STATE         *WalkState,
167     ACPI_OPERAND_OBJECT     **ReturnDesc)
168 {
169     ACPI_STATUS             Status;
170     ACPI_OPERAND_OBJECT     **Operand = &WalkState->Operands[0];
171     ACPI_NAMESPACE_NODE     *ParentNode;
172     ACPI_NAMESPACE_NODE     *StartNode;
173     ACPI_NAMESPACE_NODE     *ParameterNode = NULL;
174     ACPI_OPERAND_OBJECT     *DdbHandle;
175     ACPI_TABLE_HEADER       *Table;
176     UINT32                  TableIndex;
177 
178 
179     ACPI_FUNCTION_TRACE (ExLoadTableOp);
180 
181 
182     /* Validate lengths for the SignatureString, OEMIDString, OEMTableID */
183 
184     if ((Operand[0]->String.Length > ACPI_NAME_SIZE) ||
185         (Operand[1]->String.Length > ACPI_OEM_ID_SIZE) ||
186         (Operand[2]->String.Length > ACPI_OEM_TABLE_ID_SIZE))
187     {
188         return_ACPI_STATUS (AE_BAD_PARAMETER);
189     }
190 
191     /* Find the ACPI table in the RSDT/XSDT */
192 
193     Status = AcpiTbFindTable (Operand[0]->String.Pointer,
194                               Operand[1]->String.Pointer,
195                               Operand[2]->String.Pointer, &TableIndex);
196     if (ACPI_FAILURE (Status))
197     {
198         if (Status != AE_NOT_FOUND)
199         {
200             return_ACPI_STATUS (Status);
201         }
202 
203         /* Table not found, return an Integer=0 and AE_OK */
204 
205         DdbHandle = AcpiUtCreateIntegerObject ((UINT64) 0);
206         if (!DdbHandle)
207         {
208             return_ACPI_STATUS (AE_NO_MEMORY);
209         }
210 
211         *ReturnDesc = DdbHandle;
212         return_ACPI_STATUS (AE_OK);
213     }
214 
215     /* Default nodes */
216 
217     StartNode = WalkState->ScopeInfo->Scope.Node;
218     ParentNode = AcpiGbl_RootNode;
219 
220     /* RootPath (optional parameter) */
221 
222     if (Operand[3]->String.Length > 0)
223     {
224         /*
225          * Find the node referenced by the RootPathString.  This is the
226          * location within the namespace where the table will be loaded.
227          */
228         Status = AcpiNsGetNode (StartNode, Operand[3]->String.Pointer,
229                     ACPI_NS_SEARCH_PARENT, &ParentNode);
230         if (ACPI_FAILURE (Status))
231         {
232             return_ACPI_STATUS (Status);
233         }
234     }
235 
236     /* ParameterPath (optional parameter) */
237 
238     if (Operand[4]->String.Length > 0)
239     {
240         if ((Operand[4]->String.Pointer[0] != '\\') &&
241             (Operand[4]->String.Pointer[0] != '^'))
242         {
243             /*
244              * Path is not absolute, so it will be relative to the node
245              * referenced by the RootPathString (or the NS root if omitted)
246              */
247             StartNode = ParentNode;
248         }
249 
250         /* Find the node referenced by the ParameterPathString */
251 
252         Status = AcpiNsGetNode (StartNode, Operand[4]->String.Pointer,
253                     ACPI_NS_SEARCH_PARENT, &ParameterNode);
254         if (ACPI_FAILURE (Status))
255         {
256             return_ACPI_STATUS (Status);
257         }
258     }
259 
260     /* Load the table into the namespace */
261 
262     Status = AcpiExAddTable (TableIndex, ParentNode, &DdbHandle);
263     if (ACPI_FAILURE (Status))
264     {
265         return_ACPI_STATUS (Status);
266     }
267 
268     /* Parameter Data (optional) */
269 
270     if (ParameterNode)
271     {
272         /* Store the parameter data into the optional parameter object */
273 
274         Status = AcpiExStore (Operand[5],
275                     ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, ParameterNode),
276                     WalkState);
277         if (ACPI_FAILURE (Status))
278         {
279             (void) AcpiExUnloadTable (DdbHandle);
280 
281             AcpiUtRemoveReference (DdbHandle);
282             return_ACPI_STATUS (Status);
283         }
284     }
285 
286     Status = AcpiGetTableByIndex (TableIndex, &Table);
287     if (ACPI_SUCCESS (Status))
288     {
289         ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:"));
290         AcpiTbPrintTableHeader (0, Table);
291     }
292 
293     /* Invoke table handler if present */
294 
295     if (AcpiGbl_TableHandler)
296     {
297         (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, Table,
298                     AcpiGbl_TableHandlerContext);
299     }
300 
301     *ReturnDesc = DdbHandle;
302     return_ACPI_STATUS  (Status);
303 }
304 
305 
306 /*******************************************************************************
307  *
308  * FUNCTION:    AcpiExRegionRead
309  *
310  * PARAMETERS:  ObjDesc         - Region descriptor
311  *              Length          - Number of bytes to read
312  *              Buffer          - Pointer to where to put the data
313  *
314  * RETURN:      Status
315  *
316  * DESCRIPTION: Read data from an operation region. The read starts from the
317  *              beginning of the region.
318  *
319  ******************************************************************************/
320 
321 static ACPI_STATUS
322 AcpiExRegionRead (
323     ACPI_OPERAND_OBJECT     *ObjDesc,
324     UINT32                  Length,
325     UINT8                   *Buffer)
326 {
327     ACPI_STATUS             Status;
328     UINT64                  Value;
329     UINT32                  RegionOffset = 0;
330     UINT32                  i;
331 
332 
333     /* Bytewise reads */
334 
335     for (i = 0; i < Length; i++)
336     {
337         Status = AcpiEvAddressSpaceDispatch (ObjDesc, ACPI_READ,
338                     RegionOffset, 8, &Value);
339         if (ACPI_FAILURE (Status))
340         {
341             return (Status);
342         }
343 
344         *Buffer = (UINT8) Value;
345         Buffer++;
346         RegionOffset++;
347     }
348 
349     return (AE_OK);
350 }
351 
352 
353 /*******************************************************************************
354  *
355  * FUNCTION:    AcpiExLoadOp
356  *
357  * PARAMETERS:  ObjDesc         - Region or Buffer/Field where the table will be
358  *                                obtained
359  *              Target          - Where a handle to the table will be stored
360  *              WalkState       - Current state
361  *
362  * RETURN:      Status
363  *
364  * DESCRIPTION: Load an ACPI table from a field or operation region
365  *
366  * NOTE: Region Fields (Field, BankField, IndexFields) are resolved to buffer
367  *       objects before this code is reached.
368  *
369  *       If source is an operation region, it must refer to SystemMemory, as
370  *       per the ACPI specification.
371  *
372  ******************************************************************************/
373 
374 ACPI_STATUS
375 AcpiExLoadOp (
376     ACPI_OPERAND_OBJECT     *ObjDesc,
377     ACPI_OPERAND_OBJECT     *Target,
378     ACPI_WALK_STATE         *WalkState)
379 {
380     ACPI_OPERAND_OBJECT     *DdbHandle;
381     ACPI_TABLE_HEADER       *Table;
382     ACPI_TABLE_DESC         TableDesc;
383     UINT32                  TableIndex;
384     ACPI_STATUS             Status;
385     UINT32                  Length;
386 
387 
388     ACPI_FUNCTION_TRACE (ExLoadOp);
389 
390 
391     ACPI_MEMSET (&TableDesc, 0, sizeof (ACPI_TABLE_DESC));
392 
393     /* Source Object can be either an OpRegion or a Buffer/Field */
394 
395     switch (ObjDesc->Common.Type)
396     {
397     case ACPI_TYPE_REGION:
398 
399         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
400             "Load table from Region %p\n", ObjDesc));
401 
402         /* Region must be SystemMemory (from ACPI spec) */
403 
404         if (ObjDesc->Region.SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY)
405         {
406             return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
407         }
408 
409         /*
410          * If the Region Address and Length have not been previously evaluated,
411          * evaluate them now and save the results.
412          */
413         if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID))
414         {
415             Status = AcpiDsGetRegionArguments (ObjDesc);
416             if (ACPI_FAILURE (Status))
417             {
418                 return_ACPI_STATUS (Status);
419             }
420         }
421 
422         /* Get the table header first so we can get the table length */
423 
424         Table = ACPI_ALLOCATE (sizeof (ACPI_TABLE_HEADER));
425         if (!Table)
426         {
427             return_ACPI_STATUS (AE_NO_MEMORY);
428         }
429 
430         Status = AcpiExRegionRead (ObjDesc, sizeof (ACPI_TABLE_HEADER),
431                     ACPI_CAST_PTR (UINT8, Table));
432         Length = Table->Length;
433         ACPI_FREE (Table);
434 
435         if (ACPI_FAILURE (Status))
436         {
437             return_ACPI_STATUS (Status);
438         }
439 
440         /* Must have at least an ACPI table header */
441 
442         if (Length < sizeof (ACPI_TABLE_HEADER))
443         {
444             return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
445         }
446 
447         /*
448          * The original implementation simply mapped the table, with no copy.
449          * However, the memory region is not guaranteed to remain stable and
450          * we must copy the table to a local buffer. For example, the memory
451          * region is corrupted after suspend on some machines. Dynamically
452          * loaded tables are usually small, so this overhead is minimal.
453          *
454          * The latest implementation (5/2009) does not use a mapping at all.
455          * We use the low-level operation region interface to read the table
456          * instead of the obvious optimization of using a direct mapping.
457          * This maintains a consistent use of operation regions across the
458          * entire subsystem. This is important if additional processing must
459          * be performed in the (possibly user-installed) operation region
460          * handler. For example, AcpiExec and ASLTS depend on this.
461          */
462 
463         /* Allocate a buffer for the table */
464 
465         TableDesc.Pointer = ACPI_ALLOCATE (Length);
466         if (!TableDesc.Pointer)
467         {
468             return_ACPI_STATUS (AE_NO_MEMORY);
469         }
470 
471         /* Read the entire table */
472 
473         Status = AcpiExRegionRead (ObjDesc, Length,
474                     ACPI_CAST_PTR (UINT8, TableDesc.Pointer));
475         if (ACPI_FAILURE (Status))
476         {
477             ACPI_FREE (TableDesc.Pointer);
478             return_ACPI_STATUS (Status);
479         }
480 
481         TableDesc.Address = ObjDesc->Region.Address;
482         break;
483 
484 
485     case ACPI_TYPE_BUFFER: /* Buffer or resolved RegionField */
486 
487         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
488             "Load table from Buffer or Field %p\n", ObjDesc));
489 
490         /* Must have at least an ACPI table header */
491 
492         if (ObjDesc->Buffer.Length < sizeof (ACPI_TABLE_HEADER))
493         {
494             return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
495         }
496 
497         /* Get the actual table length from the table header */
498 
499         Table = ACPI_CAST_PTR (ACPI_TABLE_HEADER, ObjDesc->Buffer.Pointer);
500         Length = Table->Length;
501 
502         /* Table cannot extend beyond the buffer */
503 
504         if (Length > ObjDesc->Buffer.Length)
505         {
506             return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
507         }
508         if (Length < sizeof (ACPI_TABLE_HEADER))
509         {
510             return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH);
511         }
512 
513         /*
514          * Copy the table from the buffer because the buffer could be modified
515          * or even deleted in the future
516          */
517         TableDesc.Pointer = ACPI_ALLOCATE (Length);
518         if (!TableDesc.Pointer)
519         {
520             return_ACPI_STATUS (AE_NO_MEMORY);
521         }
522 
523         ACPI_MEMCPY (TableDesc.Pointer, Table, Length);
524         TableDesc.Address = ACPI_TO_INTEGER (TableDesc.Pointer);
525         break;
526 
527 
528     default:
529         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
530     }
531 
532     /* Validate table checksum (will not get validated in TbAddTable) */
533 
534     Status = AcpiTbVerifyChecksum (TableDesc.Pointer, Length);
535     if (ACPI_FAILURE (Status))
536     {
537         ACPI_FREE (TableDesc.Pointer);
538         return_ACPI_STATUS (Status);
539     }
540 
541     /* Complete the table descriptor */
542 
543     TableDesc.Length = Length;
544     TableDesc.Flags = ACPI_TABLE_ORIGIN_ALLOCATED;
545 
546     /* Install the new table into the local data structures */
547 
548     Status = AcpiTbAddTable (&TableDesc, &TableIndex);
549     if (ACPI_FAILURE (Status))
550     {
551         /* Delete allocated table buffer */
552 
553         AcpiTbDeleteTable (&TableDesc);
554         return_ACPI_STATUS (Status);
555     }
556 
557     /*
558      * Add the table to the namespace.
559      *
560      * Note: Load the table objects relative to the root of the namespace.
561      * This appears to go against the ACPI specification, but we do it for
562      * compatibility with other ACPI implementations.
563      */
564     Status = AcpiExAddTable (TableIndex, AcpiGbl_RootNode, &DdbHandle);
565     if (ACPI_FAILURE (Status))
566     {
567         /* On error, TablePtr was deallocated above */
568 
569         return_ACPI_STATUS (Status);
570     }
571 
572     /* Store the DdbHandle into the Target operand */
573 
574     Status = AcpiExStore (DdbHandle, Target, WalkState);
575     if (ACPI_FAILURE (Status))
576     {
577         (void) AcpiExUnloadTable (DdbHandle);
578 
579         /* TablePtr was deallocated above */
580 
581         AcpiUtRemoveReference (DdbHandle);
582         return_ACPI_STATUS (Status);
583     }
584 
585     ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:"));
586     AcpiTbPrintTableHeader (0, TableDesc.Pointer);
587 
588     /* Remove the reference by added by AcpiExStore above */
589 
590     AcpiUtRemoveReference (DdbHandle);
591 
592     /* Invoke table handler if present */
593 
594     if (AcpiGbl_TableHandler)
595     {
596         (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, TableDesc.Pointer,
597                     AcpiGbl_TableHandlerContext);
598     }
599 
600     return_ACPI_STATUS (Status);
601 }
602 
603 
604 /*******************************************************************************
605  *
606  * FUNCTION:    AcpiExUnloadTable
607  *
608  * PARAMETERS:  DdbHandle           - Handle to a previously loaded table
609  *
610  * RETURN:      Status
611  *
612  * DESCRIPTION: Unload an ACPI table
613  *
614  ******************************************************************************/
615 
616 ACPI_STATUS
617 AcpiExUnloadTable (
618     ACPI_OPERAND_OBJECT     *DdbHandle)
619 {
620     ACPI_STATUS             Status = AE_OK;
621     ACPI_OPERAND_OBJECT     *TableDesc = DdbHandle;
622     UINT32                  TableIndex;
623     ACPI_TABLE_HEADER       *Table;
624 
625 
626     ACPI_FUNCTION_TRACE (ExUnloadTable);
627 
628 
629     /*
630      * Validate the handle
631      * Although the handle is partially validated in AcpiExReconfiguration()
632      * when it calls AcpiExResolveOperands(), the handle is more completely
633      * validated here.
634      *
635      * Handle must be a valid operand object of type reference. Also, the
636      * DdbHandle must still be marked valid (table has not been previously
637      * unloaded)
638      */
639     if ((!DdbHandle) ||
640         (ACPI_GET_DESCRIPTOR_TYPE (DdbHandle) != ACPI_DESC_TYPE_OPERAND) ||
641         (DdbHandle->Common.Type != ACPI_TYPE_LOCAL_REFERENCE) ||
642         (!(DdbHandle->Common.Flags & AOPOBJ_DATA_VALID)))
643     {
644         return_ACPI_STATUS (AE_BAD_PARAMETER);
645     }
646 
647     /* Get the table index from the DdbHandle */
648 
649     TableIndex = TableDesc->Reference.Value;
650 
651     /* Ensure the table is still loaded */
652 
653     if (!AcpiTbIsTableLoaded (TableIndex))
654     {
655         return_ACPI_STATUS (AE_NOT_EXIST);
656     }
657 
658     /* Invoke table handler if present */
659 
660     if (AcpiGbl_TableHandler)
661     {
662         Status = AcpiGetTableByIndex (TableIndex, &Table);
663         if (ACPI_SUCCESS (Status))
664         {
665             (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_UNLOAD, Table,
666                         AcpiGbl_TableHandlerContext);
667         }
668     }
669 
670     /* Delete the portion of the namespace owned by this table */
671 
672     Status = AcpiTbDeleteNamespaceByOwner (TableIndex);
673     if (ACPI_FAILURE (Status))
674     {
675         return_ACPI_STATUS (Status);
676     }
677 
678     (void) AcpiTbReleaseOwnerId (TableIndex);
679     AcpiTbSetTableLoadedFlag (TableIndex, FALSE);
680 
681     /*
682      * Invalidate the handle. We do this because the handle may be stored
683      * in a named object and may not be actually deleted until much later.
684      */
685     DdbHandle->Common.Flags &= ~AOPOBJ_DATA_VALID;
686     return_ACPI_STATUS (AE_OK);
687 }
688 
689