xref: /titanic_52/usr/src/uts/i86pc/os/pci_cfgspace.c (revision 5ad42b1b1469908fabc0099764182e9ecbc04dda)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  * PCI configuration space access routines
29  */
30 
31 #include <sys/systm.h>
32 #include <sys/psw.h>
33 #include <sys/bootconf.h>
34 #include <sys/reboot.h>
35 #include <sys/pci_impl.h>
36 #include <sys/pci_cfgspace.h>
37 #include <sys/pci_cfgspace_impl.h>
38 #include <sys/pci_cfgacc.h>
39 #if defined(__xpv)
40 #include <sys/hypervisor.h>
41 #endif
42 
43 #if defined(__xpv)
44 int pci_max_nbus = 0xFE;
45 #endif
46 int pci_bios_cfg_type = PCI_MECHANISM_UNKNOWN;
47 int pci_bios_maxbus;
48 int pci_bios_mech;
49 int pci_bios_vers;
50 
51 /*
52  * These two variables can be used to force a configuration mechanism or
53  * to force which function is used to probe for the presence of the PCI bus.
54  */
55 int	PCI_CFG_TYPE = 0;
56 int	PCI_PROBE_TYPE = 0;
57 
58 /*
59  * No valid mcfg_mem_base by default, and accessing pci config space
60  * in mem-mapped way is disabled.
61  */
62 uint64_t mcfg_mem_base = 0;
63 uint8_t mcfg_bus_start = 0;
64 uint8_t mcfg_bus_end = 0xff;
65 
66 /*
67  * These function pointers lead to the actual implementation routines
68  * for configuration space access.  Normally they lead to either the
69  * pci_mech1_* or pci_mech2_* routines, but they can also lead to
70  * routines that work around chipset bugs.
71  * These functions are accessing pci config space via I/O way.
72  * Pci_cfgacc_get/put functions shoul be used as more common interfaces,
73  * which also provide accessing pci config space via mem-mapped way.
74  */
75 uint8_t (*pci_getb_func)(int bus, int dev, int func, int reg);
76 uint16_t (*pci_getw_func)(int bus, int dev, int func, int reg);
77 uint32_t (*pci_getl_func)(int bus, int dev, int func, int reg);
78 void (*pci_putb_func)(int bus, int dev, int func, int reg, uint8_t val);
79 void (*pci_putw_func)(int bus, int dev, int func, int reg, uint16_t val);
80 void (*pci_putl_func)(int bus, int dev, int func, int reg, uint32_t val);
81 
82 extern void (*pci_cfgacc_acc_p)(pci_cfgacc_req_t *req);
83 
84 /*
85  * Internal routines
86  */
87 static int pci_check(void);
88 
89 #if !defined(__xpv)
90 static int pci_check_bios(void);
91 static int pci_get_cfg_type(void);
92 #endif
93 
94 /* all config-space access routines share this one... */
95 kmutex_t pcicfg_mutex;
96 
97 /* ..except Orion and Neptune, which have to have their own */
98 kmutex_t pcicfg_chipset_mutex;
99 
100 void
101 pci_cfgspace_init(void)
102 {
103 	mutex_init(&pcicfg_mutex, NULL, MUTEX_SPIN,
104 	    (ddi_iblock_cookie_t)ipltospl(15));
105 	mutex_init(&pcicfg_chipset_mutex, NULL, MUTEX_SPIN,
106 	    (ddi_iblock_cookie_t)ipltospl(15));
107 	if (!pci_check()) {
108 		mutex_destroy(&pcicfg_mutex);
109 		mutex_destroy(&pcicfg_chipset_mutex);
110 	}
111 }
112 
113 /*
114  * This code determines if this system supports PCI/PCIE and which
115  * type of configuration access method is used
116  */
117 static int
118 pci_check(void)
119 {
120 	uint64_t ecfginfo[4];
121 
122 	/*
123 	 * Only do this once.  NB:  If this is not a PCI system, and we
124 	 * get called twice, we can't detect it and will probably die
125 	 * horribly when we try to ask the BIOS whether PCI is present.
126 	 * This code is safe *ONLY* during system startup when the
127 	 * BIOS is still available.
128 	 */
129 	if (pci_bios_cfg_type != PCI_MECHANISM_UNKNOWN)
130 		return (TRUE);
131 
132 #if defined(__xpv)
133 	/*
134 	 * only support PCI config mechanism 1 in i86xpv. This should be fine
135 	 * since the other ones are workarounds for old broken H/W which won't
136 	 * be supported in i86xpv anyway.
137 	 */
138 	if (DOMAIN_IS_INITDOMAIN(xen_info)) {
139 		pci_bios_cfg_type = PCI_MECHANISM_1;
140 		pci_getb_func = pci_mech1_getb;
141 		pci_getw_func = pci_mech1_getw;
142 		pci_getl_func = pci_mech1_getl;
143 		pci_putb_func = pci_mech1_putb;
144 		pci_putw_func = pci_mech1_putw;
145 		pci_putl_func = pci_mech1_putl;
146 
147 		/*
148 		 * Since we can't get the BIOS info in i86xpv, we will do an
149 		 * exhaustive search of all PCI buses. We have to do this until
150 		 * we start using the PCI information in ACPI.
151 		 */
152 		pci_bios_maxbus = pci_max_nbus;
153 	}
154 #else /* !__xpv */
155 
156 	pci_bios_cfg_type = pci_check_bios();
157 
158 	if (pci_bios_cfg_type == PCI_MECHANISM_NONE)
159 		pci_bios_cfg_type = PCI_MECHANISM_1;	/* default to mech 1 */
160 
161 	switch (pci_get_cfg_type()) {
162 	case PCI_MECHANISM_1:
163 		if (pci_is_broken_orion()) {
164 			pci_getb_func = pci_orion_getb;
165 			pci_getw_func = pci_orion_getw;
166 			pci_getl_func = pci_orion_getl;
167 			pci_putb_func = pci_orion_putb;
168 			pci_putw_func = pci_orion_putw;
169 			pci_putl_func = pci_orion_putl;
170 		} else {
171 			pci_getb_func = pci_mech1_getb;
172 			pci_getw_func = pci_mech1_getw;
173 			pci_getl_func = pci_mech1_getl;
174 			pci_putb_func = pci_mech1_putb;
175 			pci_putw_func = pci_mech1_putw;
176 			pci_putl_func = pci_mech1_putl;
177 		}
178 		break;
179 
180 	case PCI_MECHANISM_2:
181 		if (pci_check_neptune()) {
182 			/*
183 			 * The BIOS for some systems with the Intel
184 			 * Neptune chipset seem to default to #2 even
185 			 * though the chipset can do #1.  Override
186 			 * the BIOS so that MP systems will work
187 			 * correctly.
188 			 */
189 
190 			pci_getb_func = pci_neptune_getb;
191 			pci_getw_func = pci_neptune_getw;
192 			pci_getl_func = pci_neptune_getl;
193 			pci_putb_func = pci_neptune_putb;
194 			pci_putw_func = pci_neptune_putw;
195 			pci_putl_func = pci_neptune_putl;
196 		} else {
197 			pci_getb_func = pci_mech2_getb;
198 			pci_getw_func = pci_mech2_getw;
199 			pci_getl_func = pci_mech2_getl;
200 			pci_putb_func = pci_mech2_putb;
201 			pci_putw_func = pci_mech2_putw;
202 			pci_putl_func = pci_mech2_putl;
203 		}
204 		break;
205 
206 	default:
207 		return (FALSE);
208 	}
209 #endif /* __xpv */
210 
211 	/*
212 	 * Try to get a valid mcfg_mem_base in early boot
213 	 * If failed, leave mem-mapped pci config space accessing disabled
214 	 * until pci boot code (pci_autoconfig) makes sure this is a PCIE
215 	 * platform.
216 	 */
217 	if (do_bsys_getprop(NULL, MCFG_PROPNAME, ecfginfo) != -1) {
218 		mcfg_mem_base = ecfginfo[0];
219 		mcfg_bus_start = ecfginfo[2];
220 		mcfg_bus_end = ecfginfo[3];
221 	}
222 
223 	/* See pci_cfgacc.c */
224 	pci_cfgacc_acc_p = pci_cfgacc_acc;
225 
226 	return (TRUE);
227 }
228 
229 #if !defined(__xpv)
230 
231 static int
232 pci_check_bios(void)
233 {
234 	struct bop_regs regs;
235 	uint32_t	carryflag;
236 	uint16_t	ax, dx;
237 
238 	bzero(&regs, sizeof (regs));
239 	regs.eax.word.ax = (PCI_FUNCTION_ID << 8) | PCI_BIOS_PRESENT;
240 
241 	BOP_DOINT(bootops, 0x1a, &regs);
242 	carryflag = regs.eflags & PS_C;
243 	ax = regs.eax.word.ax;
244 	dx = regs.edx.word.dx;
245 
246 	/* the carry flag must not be set */
247 	if (carryflag != 0)
248 		return (PCI_MECHANISM_NONE);
249 
250 	if (dx != ('P' | 'C'<<8))
251 		return (PCI_MECHANISM_NONE);
252 
253 	/* ah (the high byte of ax) must be zero */
254 	if ((ax & 0xff00) != 0)
255 		return (PCI_MECHANISM_NONE);
256 
257 	pci_bios_mech = (ax & 0x3);
258 	pci_bios_vers = regs.ebx.word.bx;
259 	pci_bios_maxbus = (regs.ecx.word.cx & 0xff);
260 
261 	switch (pci_bios_mech) {
262 	default:	/* ?!? */
263 	case 0:		/* supports neither? */
264 		return (PCI_MECHANISM_NONE);
265 
266 	case 1:
267 	case 3:		/* supports both */
268 		return (PCI_MECHANISM_1);
269 
270 	case 2:
271 		return (PCI_MECHANISM_2);
272 	}
273 }
274 
275 static int
276 pci_get_cfg_type(void)
277 {
278 	/* Check to see if the config mechanism has been set in /etc/system */
279 	switch (PCI_CFG_TYPE) {
280 	default:
281 	case 0:
282 		break;
283 	case 1:
284 		return (PCI_MECHANISM_1);
285 	case 2:
286 		return (PCI_MECHANISM_2);
287 	case -1:
288 		return (PCI_MECHANISM_NONE);
289 	}
290 
291 	/* call one of the PCI detection algorithms */
292 	switch (PCI_PROBE_TYPE) {
293 	default:
294 	case 0:
295 		/* From pci_check() and pci_check_bios() */
296 		return (pci_bios_cfg_type);
297 	case -1:
298 		return (PCI_MECHANISM_NONE);
299 	}
300 }
301 
302 #endif	/* __xpv */
303