xref: /titanic_52/usr/src/uts/i86pc/io/psm/uppc.c (revision e8031f0a8ed0e45c6d8847c5e09424e66fd34a4b)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #define	PSMI_1_5
30 
31 #include <sys/mutex.h>
32 #include <sys/types.h>
33 #include <sys/time.h>
34 #include <sys/machlock.h>
35 #include <sys/smp_impldefs.h>
36 #include <sys/uadmin.h>
37 #include <sys/promif.h>
38 #include <sys/psm.h>
39 #include <sys/pit.h>
40 #include <sys/psm_common.h>
41 #include <sys/atomic.h>
42 
43 #define	NSEC_IN_SEC		1000000000
44 
45 /*
46  * External References
47  */
48 extern int intr_clear(void);
49 extern void intr_restore(uint_t);
50 
51 /*
52  * Local Function Prototypes
53  */
54 static void uppc_softinit(void);
55 static void uppc_picinit();
56 static int uppc_clkinit(int);
57 static int uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl);
58 static int uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl);
59 static processorid_t uppc_get_next_processorid(processorid_t cpu_id);
60 static int uppc_get_clockirq(int ipl);
61 static int uppc_probe(void);
62 static int uppc_translate_irq(dev_info_t *dip, int irqno);
63 static void uppc_shutdown(int cmd, int fcn);
64 static void uppc_preshutdown(int cmd, int fcn);
65 static int uppc_init_acpi(void);
66 static void uppc_setspl(int);
67 static int uppc_intr_enter(int, int *);
68 static void uppc_intr_exit(int, int);
69 static hrtime_t uppc_gethrtime();
70 
71 static int uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
72     int *pci_irqp, iflag_t *intr_flagp);
73 
74 /*
75  * Global Data
76  */
77 static struct standard_pic pics0;
78 int uppc_use_acpi = 1;	/* Use ACPI by default */
79 int uppc_enable_acpi = 0;
80 
81 
82 /*
83  * For interrupt link devices, if uppc_unconditional_srs is set, an irq resource
84  * will be assigned (via _SRS). If it is not set, use the current
85  * irq setting (via _CRS), but only if that irq is in the set of possible
86  * irqs (returned by _PRS) for the device.
87  */
88 int uppc_unconditional_srs = 1;
89 
90 /*
91  * For interrupt link devices, if uppc_prefer_crs is set when we are
92  * assigning an IRQ resource to a device, prefer the current IRQ setting
93  * over other possible irq settings under same conditions.
94  */
95 int uppc_prefer_crs = 1;
96 
97 int uppc_verbose = 0;
98 
99 /* flag definitions for uppc_verbose */
100 #define	UPPC_VERBOSE_IRQ_FLAG			0x00000001
101 #define	UPPC_VERBOSE_POWEROFF_FLAG		0x00000002
102 #define	UPPC_VERBOSE_POWEROFF_PAUSE_FLAG	0x00000004
103 
104 
105 #define	UPPC_VERBOSE_IRQ(fmt) \
106 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG) \
107 		cmn_err fmt;
108 
109 #define	UPPC_VERBOSE_POWEROFF(fmt) \
110 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG) \
111 		prom_printf fmt;
112 
113 uchar_t uppc_reserved_irqlist[MAX_ISA_IRQ + 1];
114 
115 static uint16_t uppc_irq_shared_table[MAX_ISA_IRQ + 1];
116 
117 /*
118  * Contains SCI irqno from FADT after initialization
119  */
120 static int uppc_sci = -1;
121 
122 /*
123  * Local Static Data
124  */
125 
126 static lock_t uppc_gethrtime_lock;
127 static hrtime_t uppc_lasthrtime;
128 
129 
130 #ifdef UPPC_DEBUG
131 #define	DENT	0x0001
132 
133 static int	uppc_debug = 0;
134 
135 
136 #endif
137 
138 
139 static struct	psm_ops uppc_ops = {
140 	uppc_probe,				/* psm_probe		*/
141 
142 	uppc_softinit,				/* psm_init		*/
143 	uppc_picinit,				/* psm_picinit		*/
144 	uppc_intr_enter,			/* psm_intr_enter	*/
145 	uppc_intr_exit,				/* psm_intr_exit	*/
146 	uppc_setspl,				/* psm_setspl		*/
147 	uppc_addspl,				/* psm_addspl		*/
148 	uppc_delspl,				/* psm_delspl		*/
149 	(int (*)(processorid_t))NULL,		/* psm_disable_intr	*/
150 	(void (*)(processorid_t))NULL,		/* psm_enable_intr	*/
151 	(int (*)(int))NULL,			/* psm_softlvl_to_irq	*/
152 	(void (*)(int))NULL,			/* psm_set_softintr	*/
153 	(void (*)(processorid_t))NULL,		/* psm_set_idlecpu	*/
154 	(void (*)(processorid_t))NULL,		/* psm_unset_idlecpu	*/
155 
156 	uppc_clkinit,				/* psm_clkinit		*/
157 	uppc_get_clockirq,			/* psm_get_clockirq	*/
158 	(void (*)(void))NULL,			/* psm_hrtimeinit	*/
159 	uppc_gethrtime,				/* psm_gethrtime	*/
160 
161 	uppc_get_next_processorid,		/* psm_get_next_processorid */
162 	(void (*)(processorid_t, caddr_t))NULL,	/* psm_cpu_start	*/
163 	(int (*)(void))NULL,			/* psm_post_cpu_start	*/
164 	uppc_shutdown,				/* psm_shutdown		*/
165 	(int (*)(int, int))NULL,		/* psm_get_ipivect	*/
166 	(void (*)(processorid_t, int))NULL,	/* psm_send_ipi		*/
167 
168 	uppc_translate_irq,			/* psm_translate_irq	*/
169 
170 	(int (*)(todinfo_t *))NULL,		/* psm_tod_get		*/
171 	(int (*)(todinfo_t *))NULL,		/* psm_tod_set		*/
172 
173 	(void (*)(int, char *))NULL,		/* psm_notify_error	*/
174 	(void (*)(int msg))NULL,		/* psm_notify_func	*/
175 	(void (*)(hrtime_t time))NULL,		/* psm_timer_reprogram	*/
176 	(void (*)(void))NULL,			/* psm_timer_enable	*/
177 	(void (*)(void))NULL,			/* psm_timer_disable	*/
178 	(void (*)(void *arg))NULL,		/* psm_post_cyclic_setup */
179 	uppc_preshutdown,			/* psm_preshutdown	*/
180 
181 	(int (*)(dev_info_t *, ddi_intr_handle_impl_t *,
182 	    psm_intr_op_t, int *))NULL		/* psm_intr_ops		*/
183 };
184 
185 
186 static struct	psm_info uppc_info = {
187 	PSM_INFO_VER01_5,	/* version				*/
188 	PSM_OWN_SYS_DEFAULT,	/* ownership				*/
189 	(struct psm_ops *)&uppc_ops, /* operation			*/
190 	"uppc",			/* machine name				*/
191 	"UniProcessor PC",	/* machine descriptions			*/
192 };
193 
194 /*
195  * Configuration Data
196  */
197 
198 /*
199  * This is the loadable module wrapper.
200  */
201 #include <sys/modctl.h>
202 
203 static void *uppc_hdlp;
204 
205 int
206 _init(void)
207 {
208 	return (psm_mod_init(&uppc_hdlp, &uppc_info));
209 }
210 
211 int
212 _fini(void)
213 {
214 	return (psm_mod_fini(&uppc_hdlp, &uppc_info));
215 }
216 
217 int
218 _info(struct modinfo *modinfop)
219 {
220 	return (psm_mod_info(&uppc_hdlp, &uppc_info, modinfop));
221 }
222 
223 /*
224  * Autoconfiguration Routines
225  */
226 
227 static int
228 uppc_probe(void)
229 {
230 
231 
232 	return (PSM_SUCCESS);
233 }
234 
235 static void
236 uppc_softinit(void)
237 {
238 	struct standard_pic *pp;
239 	int i;
240 
241 	pp = &pics0;
242 
243 
244 	if (uppc_use_acpi && uppc_init_acpi()) {
245 		build_reserved_irqlist((uchar_t *)uppc_reserved_irqlist);
246 		for (i = 0; i <= MAX_ISA_IRQ; i++)
247 			uppc_irq_shared_table[i] = 0;
248 		uppc_enable_acpi = 1;
249 	}
250 
251 	/*
252 	 * initialize the ipl mask
253 	 */
254 	for (i = 0; i < (MAXIPL << 1); i += 2) {
255 		/* enable slave lines on master */
256 		pp->c_iplmask[i] = 0xff;
257 		pp->c_iplmask[i+1] = (0xff & ~(1 << MASTERLINE));
258 	}
259 }
260 
261 /*ARGSUSED*/
262 static int
263 uppc_clkinit(int hertz)
264 {
265 	ulong_t clkticks = PIT_HZ / hz;
266 
267 	if (hertz == 0)
268 		return (0);	/* One shot mode not supported */
269 
270 	/*
271 	 * program timer 0
272 	 */
273 	outb(PITCTL_PORT, (PIT_C0|PIT_NDIVMODE|PIT_READMODE));
274 	outb(PITCTR0_PORT, (uchar_t)clkticks);
275 	outb(PITCTR0_PORT, (uchar_t)(clkticks>>8));
276 
277 	return (NSEC_IN_SEC / hertz);
278 }
279 
280 static void
281 uppc_picinit()
282 {
283 	picsetup();
284 
285 	/*
286 	 * If a valid SCI is present, manually addspl()
287 	 * since we're not set-up early enough in boot
288 	 * to do it "conventionally" (via add_avintr)
289 	 */
290 	if (uppc_sci >= 0)
291 		(void) uppc_addspl(uppc_sci, SCI_IPL, SCI_IPL, SCI_IPL);
292 }
293 
294 /*ARGSUSED3*/
295 static int
296 uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl)
297 {
298 	struct standard_pic *pp;
299 	int i;
300 	int startidx;
301 	uchar_t	vectmask;
302 
303 	if (ipl != min_ipl)
304 		return (0);
305 
306 	if (irqno > 7) {
307 		vectmask = 1 << (irqno - 8);
308 		startidx = (ipl << 1);
309 	} else {
310 		vectmask = 1 << irqno;
311 		startidx = (ipl << 1) + 1;
312 	}
313 
314 	if (irqno <= MAX_ISA_IRQ)
315 		atomic_add_16(&uppc_irq_shared_table[irqno], 1);
316 
317 	/*
318 	 * mask intr same or above ipl
319 	 * level MAXIPL has all intr off as init. default
320 	 */
321 	pp = &pics0;
322 	for (i = startidx; i < (MAXIPL << 1); i += 2) {
323 		if (pp->c_iplmask[i] & vectmask)
324 			break;
325 		pp->c_iplmask[i] |= vectmask;
326 	}
327 
328 	/*
329 	 * unmask intr below ipl
330 	 */
331 	for (i = startidx-2; i >= 0; i -= 2) {
332 		if (!(pp->c_iplmask[i] & vectmask))
333 			break;
334 		pp->c_iplmask[i] &= ~vectmask;
335 	}
336 	return (0);
337 }
338 
339 static int
340 uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl)
341 {
342 	struct standard_pic *pp;
343 	int i;
344 	uchar_t	vectmask;
345 
346 	/*
347 	 * skip if we are not deleting the last handler
348 	 * and the ipl is higher than minimum
349 	 */
350 	if ((max_ipl != PSM_INVALID_IPL) && (ipl >= min_ipl))
351 		return (0);
352 
353 	if (irqno > 7) {
354 		vectmask = 1 << (irqno - 8);
355 		i = 0;
356 	} else {
357 		vectmask = 1 << irqno;
358 		i = 1;
359 	}
360 
361 	if (irqno <= MAX_ISA_IRQ)
362 		atomic_add_16(&uppc_irq_shared_table[irqno], -1);
363 
364 	pp = &pics0;
365 
366 	/*
367 	 * check any handlers left for this irqno
368 	 */
369 	if (max_ipl != PSM_INVALID_IPL) {
370 		/*
371 		 * unmasks all levels below the lowest priority
372 		 */
373 		i += ((min_ipl - 1) << 1);
374 		for (; i >= 0; i -= 2) {
375 			if (!(pp->c_iplmask[i] & vectmask))
376 				break;
377 			pp->c_iplmask[i] &= ~vectmask;
378 		}
379 	} else {
380 		/*
381 		 * set mask to all levels
382 		 */
383 		for (; i < (MAXIPL << 1); i += 2) {
384 			if (pp->c_iplmask[i] & vectmask)
385 				break;
386 			pp->c_iplmask[i] |= vectmask;
387 		}
388 	}
389 	return (0);
390 }
391 
392 static processorid_t
393 uppc_get_next_processorid(processorid_t cpu_id)
394 {
395 	if (cpu_id == -1)
396 		return (0);
397 	return (-1);
398 }
399 
400 /*ARGSUSED*/
401 static int
402 uppc_get_clockirq(int ipl)
403 {
404 	return (CLOCK_VECTOR);
405 }
406 
407 
408 static int
409 uppc_init_acpi(void)
410 {
411 	int verboseflags = 0;
412 	int	sci;
413 	iflag_t sci_flags;
414 
415 	/*
416 	 * Process SCI configuration here; this may return
417 	 * an error if acpi-user-options has specified
418 	 * legacy mode (use ACPI without ACPI mode or SCI)
419 	 */
420 	if (acpica_get_sci(&sci, &sci_flags) != AE_OK)
421 		sci = -1;
422 
423 	/*
424 	 * Initialize sub-system - if error is returns, ACPI is not
425 	 * used.
426 	 */
427 	if (acpica_init() != AE_OK)
428 		return (0);
429 
430 	/*
431 	 * uppc implies system is in PIC mode; set edge/level
432 	 * via ELCR based on return value from get_sci; this
433 	 * will default to level/low if no override present,
434 	 * as recommended by Intel ACPI CA team.
435 	 */
436 	if (sci >= 0) {
437 		ASSERT((sci_flags.intr_el == INTR_EL_LEVEL) ||
438 		    (sci_flags.intr_el == INTR_EL_EDGE));
439 
440 		psm_set_elcr(sci, sci_flags.intr_el == INTR_EL_LEVEL);
441 	}
442 
443 	/*
444 	 * Remember SCI for later use
445 	 */
446 	uppc_sci = sci;
447 
448 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG)
449 		verboseflags |= PSM_VERBOSE_IRQ_FLAG;
450 
451 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG)
452 		verboseflags |= PSM_VERBOSE_POWEROFF_FLAG;
453 
454 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_PAUSE_FLAG)
455 		verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG;
456 
457 	if (acpi_psm_init(uppc_info.p_mach_idstring, verboseflags) ==
458 	    ACPI_PSM_FAILURE) {
459 		return (0);
460 	}
461 
462 	return (1);
463 }
464 
465 
466 static void
467 uppc_preshutdown(int cmd, int fcn)
468 {
469 	UPPC_VERBOSE_POWEROFF(("uppc_preshutdown(%d,%d);\n", cmd, fcn));
470 
471 	if ((cmd != A_SHUTDOWN) || (fcn != AD_POWEROFF)) {
472 		return;
473 	}
474 
475 	if (uppc_enable_acpi) {
476 		UPPC_VERBOSE_POWEROFF(("uppc_preshutdown: ACPI enabled\n"));
477 	} else {
478 		UPPC_VERBOSE_POWEROFF(("uppc_preshutdown: ACPI not enabled\n"));
479 	}
480 }
481 
482 static void
483 uppc_shutdown(int cmd, int fcn)
484 {
485 	UPPC_VERBOSE_POWEROFF(("uppc_shutdown(%d,%d);\n", cmd, fcn));
486 
487 	if ((cmd != A_SHUTDOWN) || (fcn != AD_POWEROFF)) {
488 		return;
489 	}
490 	if (uppc_enable_acpi)
491 		(void) acpi_poweroff();
492 }
493 
494 static int
495 uppc_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid,
496     int ipin, int *pci_irqp, iflag_t *intr_flagp)
497 {
498 	int status;
499 	acpi_psm_lnk_t acpipsmlnk;
500 
501 	if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp,
502 	    intr_flagp)) == ACPI_PSM_SUCCESS) {
503 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Found irqno %d "
504 		    "from cache for device %s, instance #%d\n", *pci_irqp,
505 		    ddi_get_name(dip), ddi_get_instance(dip)));
506 		return (status);
507 	}
508 
509 	bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t));
510 
511 	if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp,
512 	    intr_flagp, &acpipsmlnk)) == ACPI_PSM_FAILURE) {
513 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: "
514 		    " acpi_translate_pci_irq failed for device %s, instance"
515 		    " #%d\n", ddi_get_name(dip), ddi_get_instance(dip)));
516 
517 		return (status);
518 	}
519 
520 	if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) {
521 		status = uppc_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp,
522 		    intr_flagp);
523 		if (status != ACPI_PSM_SUCCESS) {
524 			status = acpi_get_current_irq_resource(&acpipsmlnk,
525 			    pci_irqp, intr_flagp);
526 		}
527 	}
528 
529 	if (status == ACPI_PSM_SUCCESS) {
530 		acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp,
531 		    intr_flagp, &acpipsmlnk);
532 		psm_set_elcr(*pci_irqp, 1); 	/* set IRQ to PCI mode */
533 
534 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] "
535 		    "new irq %d for device %s, instance #%d\n",
536 		    *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip)));
537 	}
538 
539 	return (status);
540 }
541 
542 /*
543  * Configures the irq for the interrupt link device identified by
544  * acpipsmlnkp.
545  *
546  * Gets the current and the list of possible irq settings for the
547  * device. If uppc_unconditional_srs is not set, and the current
548  * resource setting is in the list of possible irq settings,
549  * current irq resource setting is passed to the caller.
550  *
551  * Otherwise, picks an irq number from the list of possible irq
552  * settings, and sets the irq of the device to this value.
553  * If prefer_crs is set, among a set of irq numbers in the list that have
554  * the least number of devices sharing the interrupt, we pick current irq
555  * resource setting if it is a member of this set.
556  *
557  * Passes the irq number in the value pointed to by pci_irqp, and
558  * polarity and sensitivity in the structure pointed to by dipintrflagp
559  * to the caller.
560  *
561  * Note that if setting the irq resource failed, but successfuly obtained
562  * the current irq resource settings, passes the current irq resources
563  * and considers it a success.
564  *
565  * Returns:
566  * ACPI_PSM_SUCCESS on success.
567  *
568  * ACPI_PSM_FAILURE if an error occured during the configuration or
569  * if a suitable irq was not found for this device, or if setting the
570  * irq resource and obtaining the current resource fails.
571  *
572  */
573 static int
574 uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
575     int *pci_irqp, iflag_t *dipintr_flagp)
576 {
577 	int i, min_share, foundnow, done = 0;
578 	int32_t irq;
579 	int32_t share_irq = -1;
580 	int32_t chosen_irq = -1;
581 	int cur_irq = -1;
582 	acpi_irqlist_t *irqlistp;
583 	acpi_irqlist_t *irqlistent;
584 
585 	if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp))
586 	    == ACPI_PSM_FAILURE) {
587 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Unable to determine "
588 		    "or assign IRQ for device %s, instance #%d: The system was "
589 		    "unable to get the list of potential IRQs from ACPI.",
590 		    ddi_get_name(dip), ddi_get_instance(dip)));
591 
592 		return (ACPI_PSM_FAILURE);
593 	}
594 
595 	if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
596 	    dipintr_flagp) == ACPI_PSM_SUCCESS) && (!uppc_unconditional_srs) &&
597 	    (cur_irq > 0)) {
598 
599 		if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL)
600 		    == ACPI_PSM_SUCCESS) {
601 
602 			acpi_free_irqlist(irqlistp);
603 			ASSERT(pci_irqp != NULL);
604 			*pci_irqp = cur_irq;
605 			return (ACPI_PSM_SUCCESS);
606 		}
607 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Could not find the "
608 		    "current irq %d for device %s, instance #%d in ACPI's "
609 		    "list of possible irqs for this device. Picking one from "
610 		    " the latter list.", cur_irq, ddi_get_name(dip),
611 		    ddi_get_instance(dip)));
612 
613 	}
614 
615 	irqlistent = irqlistp;
616 	min_share = 255;
617 
618 	while (irqlistent != NULL) {
619 
620 		for (foundnow = 0, i = 0; i < irqlistent->num_irqs; i++) {
621 
622 			irq = irqlistp->irqs[i];
623 
624 			if ((irq > MAX_ISA_IRQ) ||
625 			    (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) ||
626 			    (irq == 0))
627 				continue;
628 
629 			if (uppc_reserved_irqlist[irq])
630 				continue;
631 
632 			if (uppc_irq_shared_table[irq] == 0) {
633 				chosen_irq = irq;
634 				foundnow = 1;
635 				if (!(uppc_prefer_crs) || (irq == cur_irq)) {
636 					done = 1;
637 					break;
638 				}
639 			}
640 
641 			if ((uppc_irq_shared_table[irq] < min_share) ||
642 			    ((uppc_irq_shared_table[irq] == min_share) &&
643 			    (cur_irq == irq) && (uppc_prefer_crs))) {
644 				min_share = uppc_irq_shared_table[irq];
645 				share_irq = irq;
646 				foundnow = 1;
647 			}
648 		}
649 
650 		/* If we found an IRQ in the inner loop, save the details */
651 		if (foundnow && ((chosen_irq != -1) || (share_irq != -1))) {
652 			/*
653 			 * Copy the acpi_prs_private_t and flags from this
654 			 * irq list entry, since we found an irq from this
655 			 * entry.
656 			 */
657 			acpipsmlnkp->acpi_prs_prv = irqlistent->acpi_prs_prv;
658 			*dipintr_flagp = irqlistent->intr_flags;
659 		}
660 
661 		if (done)
662 			break;
663 
664 		/* Load the next entry in the irqlist */
665 		irqlistent = irqlistent->next;
666 	}
667 
668 	acpi_free_irqlist(irqlistp);
669 
670 	if (chosen_irq != -1)
671 		irq = chosen_irq;
672 	else if (share_irq != -1)
673 		irq = share_irq;
674 	else {
675 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Could not find a "
676 		    "suitable irq from the list of possible irqs for device "
677 		    "%s, instance #%d in ACPI's list of possible\n",
678 		    ddi_get_name(dip), ddi_get_instance(dip)));
679 
680 		return (ACPI_PSM_FAILURE);
681 	}
682 
683 
684 	UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Setting irq %d for device %s "
685 	    "instance #%d\n", irq, ddi_get_name(dip), ddi_get_instance(dip)));
686 
687 	if ((acpi_set_irq_resource(acpipsmlnkp, irq)) == ACPI_PSM_SUCCESS) {
688 		/*
689 		 * setting irq was successful, check to make sure CRS
690 		 * reflects that. If CRS does not agree with what we
691 		 * set, return the irq that was set.
692 		 */
693 
694 		if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
695 		    dipintr_flagp) == ACPI_PSM_SUCCESS) {
696 
697 			if (cur_irq != irq)
698 				UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: "
699 				    "IRQ resource set (irqno %d) for device %s "
700 				    "instance #%d, differs from current "
701 				    "setting irqno %d",
702 				    irq, ddi_get_name(dip),
703 				    ddi_get_instance(dip), cur_irq));
704 		}
705 		/*
706 		 * return the irq that was set, and not what CRS reports,
707 		 * since CRS has been seen to be bogus on some systems
708 		 */
709 		cur_irq = irq;
710 	} else {
711 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: set resource irq %d "
712 		    "failed for device %s instance #%d",
713 		    irq, ddi_get_name(dip), ddi_get_instance(dip)));
714 		if (cur_irq == -1)
715 			return (ACPI_PSM_FAILURE);
716 	}
717 
718 	ASSERT(pci_irqp != NULL);
719 	*pci_irqp = cur_irq;
720 	return (ACPI_PSM_SUCCESS);
721 }
722 
723 
724 /*ARGSUSED*/
725 static int
726 uppc_translate_irq(dev_info_t *dip, int irqno)
727 {
728 	char dev_type[16];
729 	int dev_len, pci_irq, devid, busid;
730 	ddi_acc_handle_t cfg_handle;
731 	uchar_t ipin, iline;
732 	iflag_t intr_flag;
733 
734 	if (dip == NULL) {
735 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno = %d"
736 		    " dip = NULL\n", irqno));
737 		return (irqno);
738 	}
739 
740 	if (!uppc_enable_acpi) {
741 		return (irqno);
742 	}
743 
744 	dev_len = sizeof (dev_type);
745 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(dip),
746 	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
747 	    &dev_len) != DDI_PROP_SUCCESS) {
748 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno %d"
749 		    "device %s instance %d no device_type\n", irqno,
750 		    ddi_get_name(dip), ddi_get_instance(dip)));
751 		return (irqno);
752 	}
753 
754 	if ((strcmp(dev_type, "pci") == 0) ||
755 	    (strcmp(dev_type, "pciex") == 0)) {
756 
757 		/* pci device */
758 		if (acpica_get_bdf(dip, &busid, &devid, NULL) != 0)
759 			return (irqno);
760 
761 		if (pci_config_setup(dip, &cfg_handle) != DDI_SUCCESS)
762 			return (irqno);
763 
764 		ipin = pci_config_get8(cfg_handle, PCI_CONF_IPIN) - PCI_INTA;
765 		iline = pci_config_get8(cfg_handle, PCI_CONF_ILINE);
766 		if (uppc_acpi_translate_pci_irq(dip, busid, devid,
767 		    ipin, &pci_irq, &intr_flag) == ACPI_PSM_SUCCESS) {
768 
769 			UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] new irq "
770 			    "%d old irq %d device %s, instance %d\n", pci_irq,
771 			    irqno, ddi_get_name(dip), ddi_get_instance(dip)));
772 
773 			/*
774 			 * Make sure pci_irq is within range.
775 			 * Otherwise, fall through and return irqno.
776 			 */
777 			if (pci_irq <= MAX_ISA_IRQ) {
778 				if (iline != pci_irq) {
779 					/*
780 					 * Update the device's ILINE byte,
781 					 * in case uppc_acpi_translate_pci_irq
782 					 * has choosen a different pci_irq
783 					 * than the BIOS has configured.
784 					 * Some chipsets use the value in
785 					 * ILINE to control interrupt routing,
786 					 * in conflict with the PCI spec.
787 					 */
788 					pci_config_put8(cfg_handle,
789 					    PCI_CONF_ILINE, pci_irq);
790 				}
791 				pci_config_teardown(&cfg_handle);
792 				return (pci_irq);
793 			}
794 		}
795 		pci_config_teardown(&cfg_handle);
796 
797 		/* FALLTHRU to common case - returning irqno */
798 	} else {
799 		/* non-PCI; assumes ISA-style edge-triggered */
800 		psm_set_elcr(irqno, 0); 	/* set IRQ to ISA mode */
801 
802 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: non-pci,"
803 		    "irqno %d device %s instance %d\n", irqno,
804 		    ddi_get_name(dip), ddi_get_instance(dip)));
805 
806 	}
807 
808 	return (irqno);
809 }
810 
811 /*
812  * uppc_intr_enter() raises the ipl to the level of the current interrupt,
813  * and sends EOI to the pics.
814  * If interrupt is 7 or 15 and not spurious interrupt, send specific EOI
815  * else send non-specific EOI
816  * uppc_intr_enter() returns the new priority level,
817  * or -1 for spurious interrupt
818  */
819 static int
820 uppc_intr_enter(int ipl, int *vector)
821 {
822 	int newipl;
823 	int intno;
824 
825 	intno = (*vector);
826 
827 	ASSERT(intno < 256);
828 
829 	newipl = autovect[intno].avh_hi_pri;
830 
831 	/*
832 	 * During wait_till_seen() periods when interrupt vector is being
833 	 * removed in remove_av(), the removed hardware interrupt could
834 	 * trigger and got here with newipl 0.  It has to send EOI
835 	 * as usual but no need to call setspl and returns -1 like spurious.
836 	 */
837 	if ((intno & 7) != 7) {
838 		if (newipl)
839 			uppc_setspl(newipl);
840 		outb(MCMD_PORT, PIC_NSEOI);
841 		if (intno >= 8) {
842 			outb(SCMD_PORT, PIC_NSEOI);
843 		}
844 	} else { /* int was 7 or 15 */
845 		if (newipl && newipl <= ipl) { /* Check for spurious int */
846 			if (intno != 7)
847 				outb(MCMD_PORT, PIC_NSEOI);
848 			return (-1); /* Spurious int */
849 		} else {
850 			if (newipl)
851 				uppc_setspl(newipl);
852 			if (intno != 7) {
853 				outb(MCMD_PORT, PIC_NSEOI);
854 				outb(SCMD_PORT, PIC_SEOI_LVL7);
855 			} else  {
856 				outb(MCMD_PORT, PIC_SEOI_LVL7);
857 			}
858 		}
859 	}
860 
861 	if (newipl)
862 		return (newipl);
863 	else
864 		return (-1); /* not real spurious int */
865 }
866 
867 /*
868  * uppc_intr_exit() restores the old interrupt
869  * priority level after processing an interrupt.
870  * It is called with interrupts disabled, and does not enable interrupts.
871  */
872 /* ARGSUSED */
873 static void
874 uppc_intr_exit(int ipl, int vector)
875 {
876 	uppc_setspl(ipl);
877 }
878 
879 /*
880  * uppc_setspl() loads new interrupt masks into the pics
881  * based on input ipl.
882  */
883 /* ARGSUSED */
884 static void
885 uppc_setspl(int ipl)
886 {
887 	struct standard_pic *pp;
888 	uint8_t smask, mmask;
889 	uint8_t cursmask, curmmask;
890 
891 	pp = &pics0;
892 	smask = pp->c_iplmask[ipl * 2];
893 	mmask = pp->c_iplmask[ipl * 2 + 1];
894 	cursmask = pp->c_curmask[0];
895 	curmmask = pp->c_curmask[1];
896 	if (cursmask == smask && curmmask == mmask)
897 		return;
898 	pp->c_curmask[0] = smask;
899 	pp->c_curmask[1] = mmask;
900 
901 	if (cursmask != smask) {
902 		/*
903 		 * program new slave pic mask
904 		 */
905 		outb(SIMR_PORT, smask);
906 	}
907 	if (curmmask != mmask) {
908 		/*
909 		 * program new master pic mask
910 		 */
911 		outb(MIMR_PORT, mmask);
912 	}
913 	/*
914 	 * read master to allow pics to settle
915 	 */
916 	(void) inb(MIMR_PORT);
917 }
918 
919 /*
920  * uppc_gethrtime() returns high resolution timer value
921  */
922 static hrtime_t
923 uppc_gethrtime()
924 {
925 	hrtime_t timeval, temp;
926 	unsigned int oflags, ctr0;
927 
928 	oflags = intr_clear(); /* disable ints */
929 	lock_set(&uppc_gethrtime_lock);
930 retry:
931 	temp = hrtime_base;
932 	outb(PITCTL_PORT, 0);	/* latch counter 0 */
933 	/*
934 	 * read counter 0
935 	 */
936 	ctr0 = inb(PITCTR0_PORT);
937 	ctr0 |= inb(PITCTR0_PORT) << 8;
938 	timeval = (hrtime_t)ctr0 * (NANOSEC / PIT_HZ);
939 	if (temp != hrtime_base)
940 		goto retry;
941 	timeval -= temp;
942 	if (timeval < uppc_lasthrtime)
943 		timeval = uppc_lasthrtime;
944 	uppc_lasthrtime = timeval;
945 	lock_clear(&uppc_gethrtime_lock);
946 	intr_restore(oflags);
947 	return (timeval);
948 }
949