xref: /titanic_52/usr/src/uts/i86pc/io/psm/uppc.c (revision b9e93c10c0a2a4bb069d38bb311021a9478c4711)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #define	PSMI_1_6
27 
28 #include <sys/mutex.h>
29 #include <sys/types.h>
30 #include <sys/time.h>
31 #include <sys/machlock.h>
32 #include <sys/smp_impldefs.h>
33 #include <sys/uadmin.h>
34 #include <sys/promif.h>
35 #include <sys/psm.h>
36 #include <sys/pit.h>
37 #include <sys/apic.h>
38 #include <sys/psm_common.h>
39 #include <sys/atomic.h>
40 #include <sys/archsystm.h>
41 
42 #define	NSEC_IN_SEC		1000000000
43 
44 /*
45  * Local Function Prototypes
46  */
47 static void uppc_softinit(void);
48 static void uppc_picinit();
49 static int uppc_post_cpu_start(void);
50 static int uppc_clkinit(int);
51 static int uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl);
52 static int uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl);
53 static processorid_t uppc_get_next_processorid(processorid_t cpu_id);
54 static int uppc_get_clockirq(int ipl);
55 static int uppc_probe(void);
56 static int uppc_translate_irq(dev_info_t *dip, int irqno);
57 static void uppc_shutdown(int cmd, int fcn);
58 static void uppc_preshutdown(int cmd, int fcn);
59 static int uppc_state(psm_state_request_t *request);
60 static int uppc_init_acpi(void);
61 static void uppc_setspl(int);
62 static int uppc_intr_enter(int, int *);
63 static void uppc_intr_exit(int, int);
64 static hrtime_t uppc_gethrtime();
65 
66 static int uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
67     int *pci_irqp, iflag_t *intr_flagp);
68 
69 /*
70  * Global Data
71  */
72 static struct standard_pic pics0;
73 int uppc_use_acpi = 1;	/* Use ACPI by default */
74 int uppc_enable_acpi = 0;
75 
76 
77 /*
78  * For interrupt link devices, if uppc_unconditional_srs is set, an irq resource
79  * will be assigned (via _SRS). If it is not set, use the current
80  * irq setting (via _CRS), but only if that irq is in the set of possible
81  * irqs (returned by _PRS) for the device.
82  */
83 int uppc_unconditional_srs = 1;
84 
85 /*
86  * For interrupt link devices, if uppc_prefer_crs is set when we are
87  * assigning an IRQ resource to a device, prefer the current IRQ setting
88  * over other possible irq settings under same conditions.
89  */
90 int uppc_prefer_crs = 1;
91 
92 int uppc_verbose = 0;
93 
94 /* flag definitions for uppc_verbose */
95 #define	UPPC_VERBOSE_IRQ_FLAG			0x00000001
96 #define	UPPC_VERBOSE_POWEROFF_FLAG		0x00000002
97 #define	UPPC_VERBOSE_POWEROFF_PAUSE_FLAG	0x00000004
98 
99 
100 #define	UPPC_VERBOSE_IRQ(fmt) \
101 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG) \
102 		cmn_err fmt;
103 
104 #define	UPPC_VERBOSE_POWEROFF(fmt) \
105 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG) \
106 		prom_printf fmt;
107 
108 uchar_t uppc_reserved_irqlist[MAX_ISA_IRQ + 1];
109 
110 static uint16_t uppc_irq_shared_table[MAX_ISA_IRQ + 1];
111 
112 /*
113  * Contains SCI irqno from FADT after initialization
114  */
115 static int uppc_sci = -1;
116 
117 /*
118  * Local Static Data
119  */
120 
121 static lock_t uppc_gethrtime_lock;
122 static hrtime_t uppc_lasthrtime;
123 
124 
125 #ifdef UPPC_DEBUG
126 #define	DENT	0x0001
127 
128 static int	uppc_debug = 0;
129 
130 
131 #endif
132 
133 
134 static struct	psm_ops uppc_ops = {
135 	uppc_probe,				/* psm_probe		*/
136 
137 	uppc_softinit,				/* psm_init		*/
138 	uppc_picinit,				/* psm_picinit		*/
139 	uppc_intr_enter,			/* psm_intr_enter	*/
140 	uppc_intr_exit,				/* psm_intr_exit	*/
141 	uppc_setspl,				/* psm_setspl		*/
142 	uppc_addspl,				/* psm_addspl		*/
143 	uppc_delspl,				/* psm_delspl		*/
144 	(int (*)(processorid_t))NULL,		/* psm_disable_intr	*/
145 	(void (*)(processorid_t))NULL,		/* psm_enable_intr	*/
146 	(int (*)(int))NULL,			/* psm_softlvl_to_irq	*/
147 	(void (*)(int))NULL,			/* psm_set_softintr	*/
148 	(void (*)(processorid_t))NULL,		/* psm_set_idlecpu	*/
149 	(void (*)(processorid_t))NULL,		/* psm_unset_idlecpu	*/
150 
151 	uppc_clkinit,				/* psm_clkinit		*/
152 	uppc_get_clockirq,			/* psm_get_clockirq	*/
153 	(void (*)(void))NULL,			/* psm_hrtimeinit	*/
154 	uppc_gethrtime,				/* psm_gethrtime	*/
155 
156 	uppc_get_next_processorid,		/* psm_get_next_processorid */
157 	(int (*)(processorid_t, caddr_t))NULL,	/* psm_cpu_start	*/
158 	uppc_post_cpu_start,			/* psm_post_cpu_start	*/
159 	uppc_shutdown,				/* psm_shutdown		*/
160 	(int (*)(int, int))NULL,		/* psm_get_ipivect	*/
161 	(void (*)(processorid_t, int))NULL,	/* psm_send_ipi		*/
162 
163 	uppc_translate_irq,			/* psm_translate_irq	*/
164 
165 	(void (*)(int, char *))NULL,		/* psm_notify_error	*/
166 	(void (*)(int msg))NULL,		/* psm_notify_func	*/
167 	(void (*)(hrtime_t time))NULL,		/* psm_timer_reprogram	*/
168 	(void (*)(void))NULL,			/* psm_timer_enable	*/
169 	(void (*)(void))NULL,			/* psm_timer_disable	*/
170 	(void (*)(void *arg))NULL,		/* psm_post_cyclic_setup */
171 	uppc_preshutdown,			/* psm_preshutdown	*/
172 
173 	(int (*)(dev_info_t *, ddi_intr_handle_impl_t *,
174 	    psm_intr_op_t, int *))NULL,		/* psm_intr_ops		*/
175 
176 	uppc_state				/* psm_state		*/
177 };
178 
179 
180 static struct	psm_info uppc_info = {
181 	PSM_INFO_VER01_6,	/* version				*/
182 	PSM_OWN_SYS_DEFAULT,	/* ownership				*/
183 	(struct psm_ops *)&uppc_ops, /* operation			*/
184 	"uppc",			/* machine name				*/
185 	"UniProcessor PC",	/* machine descriptions			*/
186 };
187 
188 /*
189  * Configuration Data
190  */
191 
192 /*
193  * This is the loadable module wrapper.
194  */
195 #include <sys/modctl.h>
196 
197 static void *uppc_hdlp;
198 
199 int
200 _init(void)
201 {
202 	return (psm_mod_init(&uppc_hdlp, &uppc_info));
203 }
204 
205 int
206 _fini(void)
207 {
208 	return (psm_mod_fini(&uppc_hdlp, &uppc_info));
209 }
210 
211 int
212 _info(struct modinfo *modinfop)
213 {
214 	return (psm_mod_info(&uppc_hdlp, &uppc_info, modinfop));
215 }
216 
217 /*
218  * Autoconfiguration Routines
219  */
220 
221 static int
222 uppc_probe(void)
223 {
224 
225 
226 	return (PSM_SUCCESS);
227 }
228 
229 static void
230 uppc_softinit(void)
231 {
232 	struct standard_pic *pp;
233 	int i;
234 
235 	pp = &pics0;
236 
237 
238 	if (uppc_use_acpi && uppc_init_acpi()) {
239 		build_reserved_irqlist((uchar_t *)uppc_reserved_irqlist);
240 		for (i = 0; i <= MAX_ISA_IRQ; i++)
241 			uppc_irq_shared_table[i] = 0;
242 		uppc_enable_acpi = 1;
243 	}
244 
245 	/*
246 	 * initialize the ipl mask
247 	 */
248 	for (i = 0; i < (MAXIPL << 1); i += 2) {
249 		/* enable slave lines on master */
250 		pp->c_iplmask[i] = 0xff;
251 		pp->c_iplmask[i+1] = (0xff & ~(1 << MASTERLINE));
252 	}
253 }
254 
255 /*ARGSUSED*/
256 static int
257 uppc_clkinit(int hertz)
258 {
259 	ulong_t clkticks = PIT_HZ / hz;
260 
261 	if (hertz == 0)
262 		return (0);	/* One shot mode not supported */
263 
264 	/*
265 	 * program timer 0
266 	 */
267 	outb(PITCTL_PORT, (PIT_C0|PIT_NDIVMODE|PIT_READMODE));
268 	outb(PITCTR0_PORT, (uchar_t)clkticks);
269 	outb(PITCTR0_PORT, (uchar_t)(clkticks>>8));
270 
271 	return (NSEC_IN_SEC / hertz);
272 }
273 
274 static void
275 uppc_picinit()
276 {
277 	picsetup();
278 
279 	/*
280 	 * If a valid SCI is present, manually addspl()
281 	 * since we're not set-up early enough in boot
282 	 * to do it "conventionally" (via add_avintr)
283 	 */
284 	if (uppc_sci >= 0)
285 		(void) uppc_addspl(uppc_sci, SCI_IPL, SCI_IPL, SCI_IPL);
286 }
287 
288 static int
289 uppc_post_cpu_start(void)
290 {
291 	/*
292 	 * On uppc machines psm_post_cpu_start is called during S3 resume
293 	 * on the boot cpu from assembly, using the ap_mlsetup vector.
294 	 */
295 
296 	/*
297 	 * Init master and slave pic
298 	 */
299 	picsetup();
300 
301 	/*
302 	 * program timer 0
303 	 */
304 	(void) uppc_clkinit(hz);
305 
306 	return (PSM_SUCCESS);
307 }
308 
309 /*ARGSUSED3*/
310 static int
311 uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl)
312 {
313 	struct standard_pic *pp;
314 	int i;
315 	int startidx;
316 	uchar_t	vectmask;
317 
318 	if (irqno <= MAX_ISA_IRQ)
319 		atomic_add_16(&uppc_irq_shared_table[irqno], 1);
320 
321 	if (ipl != min_ipl)
322 		return (0);
323 
324 	if (irqno > 7) {
325 		vectmask = 1 << (irqno - 8);
326 		startidx = (ipl << 1);
327 	} else {
328 		vectmask = 1 << irqno;
329 		startidx = (ipl << 1) + 1;
330 	}
331 
332 	/*
333 	 * mask intr same or above ipl
334 	 * level MAXIPL has all intr off as init. default
335 	 */
336 	pp = &pics0;
337 	for (i = startidx; i < (MAXIPL << 1); i += 2) {
338 		if (pp->c_iplmask[i] & vectmask)
339 			break;
340 		pp->c_iplmask[i] |= vectmask;
341 	}
342 
343 	/*
344 	 * unmask intr below ipl
345 	 */
346 	for (i = startidx-2; i >= 0; i -= 2) {
347 		if (!(pp->c_iplmask[i] & vectmask))
348 			break;
349 		pp->c_iplmask[i] &= ~vectmask;
350 	}
351 	return (0);
352 }
353 
354 static int
355 uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl)
356 {
357 	struct standard_pic *pp;
358 	int i;
359 	uchar_t	vectmask;
360 
361 	if (irqno <= MAX_ISA_IRQ)
362 		atomic_add_16(&uppc_irq_shared_table[irqno], -1);
363 
364 	/*
365 	 * skip if we are not deleting the last handler
366 	 * and the ipl is higher than minimum
367 	 */
368 	if ((max_ipl != PSM_INVALID_IPL) && (ipl >= min_ipl))
369 		return (0);
370 
371 	if (irqno > 7) {
372 		vectmask = 1 << (irqno - 8);
373 		i = 0;
374 	} else {
375 		vectmask = 1 << irqno;
376 		i = 1;
377 	}
378 
379 	pp = &pics0;
380 
381 	/*
382 	 * check any handlers left for this irqno
383 	 */
384 	if (max_ipl != PSM_INVALID_IPL) {
385 		/*
386 		 * unmasks all levels below the lowest priority
387 		 */
388 		i += ((min_ipl - 1) << 1);
389 		for (; i >= 0; i -= 2) {
390 			if (!(pp->c_iplmask[i] & vectmask))
391 				break;
392 			pp->c_iplmask[i] &= ~vectmask;
393 		}
394 	} else {
395 		/*
396 		 * set mask to all levels
397 		 */
398 		for (; i < (MAXIPL << 1); i += 2) {
399 			if (pp->c_iplmask[i] & vectmask)
400 				break;
401 			pp->c_iplmask[i] |= vectmask;
402 		}
403 	}
404 	return (0);
405 }
406 
407 static processorid_t
408 uppc_get_next_processorid(processorid_t cpu_id)
409 {
410 	if (cpu_id == -1)
411 		return (0);
412 	return (-1);
413 }
414 
415 /*ARGSUSED*/
416 static int
417 uppc_get_clockirq(int ipl)
418 {
419 	return (CLOCK_VECTOR);
420 }
421 
422 
423 static int
424 uppc_init_acpi(void)
425 {
426 	int verboseflags = 0;
427 	int	sci;
428 	iflag_t sci_flags;
429 
430 	/*
431 	 * Process SCI configuration here; this may return
432 	 * an error if acpi-user-options has specified
433 	 * legacy mode (use ACPI without ACPI mode or SCI)
434 	 */
435 	if (acpica_get_sci(&sci, &sci_flags) != AE_OK)
436 		sci = -1;
437 
438 	/*
439 	 * Initialize sub-system - if error is returns, ACPI is not
440 	 * used.
441 	 */
442 	if (acpica_init() != AE_OK)
443 		return (0);
444 
445 	/*
446 	 * uppc implies system is in PIC mode; set edge/level
447 	 * via ELCR based on return value from get_sci; this
448 	 * will default to level/low if no override present,
449 	 * as recommended by Intel ACPI CA team.
450 	 */
451 	if (sci >= 0) {
452 		ASSERT((sci_flags.intr_el == INTR_EL_LEVEL) ||
453 		    (sci_flags.intr_el == INTR_EL_EDGE));
454 
455 		psm_set_elcr(sci, sci_flags.intr_el == INTR_EL_LEVEL);
456 	}
457 
458 	/*
459 	 * Remember SCI for later use
460 	 */
461 	uppc_sci = sci;
462 
463 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG)
464 		verboseflags |= PSM_VERBOSE_IRQ_FLAG;
465 
466 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG)
467 		verboseflags |= PSM_VERBOSE_POWEROFF_FLAG;
468 
469 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_PAUSE_FLAG)
470 		verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG;
471 
472 	if (acpi_psm_init(uppc_info.p_mach_idstring, verboseflags) ==
473 	    ACPI_PSM_FAILURE) {
474 		return (0);
475 	}
476 
477 	return (1);
478 }
479 
480 
481 static void
482 uppc_preshutdown(int cmd, int fcn)
483 {
484 	UPPC_VERBOSE_POWEROFF(("uppc_preshutdown(%d,%d);\n", cmd, fcn));
485 
486 }
487 
488 static void
489 uppc_shutdown(int cmd, int fcn)
490 {
491 	UPPC_VERBOSE_POWEROFF(("uppc_shutdown(%d,%d);\n", cmd, fcn));
492 
493 	/*
494 	 * Return if passed a command other than A_SHUTDOWN or
495 	 * if we're not using ACPI.
496 	 */
497 	if ((cmd != A_SHUTDOWN) || (!uppc_enable_acpi))
498 		return;
499 
500 	/*
501 	 * Switch system back into Legacy-Mode if using ACPI and
502 	 * not powering-off.  Some BIOSes need to remain in ACPI-mode
503 	 * for power-off to succeed (Dell Dimension 4600)
504 	 */
505 	if (fcn != AD_POWEROFF) {
506 		(void) AcpiDisable();
507 		return;
508 	}
509 
510 	(void) acpi_poweroff();
511 }
512 
513 
514 static int
515 uppc_acpi_enter_picmode(void)
516 {
517 	ACPI_OBJECT_LIST	arglist;
518 	ACPI_OBJECT		arg;
519 	ACPI_STATUS		status;
520 
521 	/* Setup parameter object */
522 	arglist.Count = 1;
523 	arglist.Pointer = &arg;
524 	arg.Type = ACPI_TYPE_INTEGER;
525 	arg.Integer.Value = ACPI_PIC_MODE;
526 
527 	status = AcpiEvaluateObject(NULL, "\\_PIC", &arglist, NULL);
528 	if (ACPI_FAILURE(status))
529 		return (PSM_FAILURE);
530 	else
531 		return (PSM_SUCCESS);
532 }
533 
534 
535 struct pic_state {
536 	int8_t		mmask;
537 	int8_t		smask;
538 	uint16_t	elcr;
539 };
540 
541 
542 static void
543 pic_save_state(struct pic_state *sp)
544 {
545 	struct standard_pic *pp;
546 	int	vecno;
547 
548 	/*
549 	 * Only the PIC masks and the ELCR can be saved;
550 	 * other 8259 state is write-only
551 	 */
552 
553 	/*
554 	 * save current master and slave interrupt mask
555 	 */
556 	pp = &pics0;
557 	sp->smask = pp->c_curmask[0];
558 	sp->mmask = pp->c_curmask[1];
559 
560 	/*
561 	 * save edge/level configuration for isa interrupts
562 	 */
563 	sp->elcr = 0;
564 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
565 		sp->elcr |= psm_get_elcr(vecno) << vecno;
566 }
567 
568 static void
569 pic_restore_state(struct pic_state *sp)
570 {
571 	int	vecno;
572 
573 	/* Restore master and slave interrupt masks */
574 	outb(SIMR_PORT, sp->smask);
575 	outb(MIMR_PORT, sp->mmask);
576 
577 	/* Read master to allow pics to settle */
578 	(void) inb(MIMR_PORT);
579 
580 	/* Restore edge/level configuration for isa interupts */
581 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
582 		psm_set_elcr(vecno, sp->elcr & (1 << vecno));
583 
584 	/* Reenter PIC mode before restoring LNK devices */
585 	(void) uppc_acpi_enter_picmode();
586 
587 	/* Restore ACPI link device mappings */
588 	acpi_restore_link_devices();
589 }
590 
591 static int
592 uppc_state(psm_state_request_t *rp)
593 {
594 	switch (rp->psr_cmd) {
595 	case PSM_STATE_ALLOC:
596 		rp->req.psm_state_req.psr_state =
597 		    kmem_zalloc(sizeof (struct pic_state), KM_NOSLEEP);
598 		if (rp->req.psm_state_req.psr_state == NULL)
599 			return (ENOMEM);
600 		rp->req.psm_state_req.psr_state_size =
601 		    sizeof (struct pic_state);
602 		return (0);
603 	case PSM_STATE_FREE:
604 		kmem_free(rp->req.psm_state_req.psr_state,
605 		    rp->req.psm_state_req.psr_state_size);
606 		return (0);
607 	case PSM_STATE_SAVE:
608 		pic_save_state(rp->req.psm_state_req.psr_state);
609 		return (0);
610 	case PSM_STATE_RESTORE:
611 		pic_restore_state(rp->req.psm_state_req.psr_state);
612 		return (0);
613 	default:
614 		return (EINVAL);
615 	}
616 }
617 
618 
619 static int
620 uppc_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid,
621     int ipin, int *pci_irqp, iflag_t *intr_flagp)
622 {
623 	int status;
624 	acpi_psm_lnk_t acpipsmlnk;
625 
626 	if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp,
627 	    intr_flagp)) == ACPI_PSM_SUCCESS) {
628 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Found irqno %d "
629 		    "from cache for device %s, instance #%d\n", *pci_irqp,
630 		    ddi_get_name(dip), ddi_get_instance(dip)));
631 		return (status);
632 	}
633 
634 	bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t));
635 
636 	if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp,
637 	    intr_flagp, &acpipsmlnk)) == ACPI_PSM_FAILURE) {
638 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: "
639 		    " acpi_translate_pci_irq failed for device %s, instance"
640 		    " #%d\n", ddi_get_name(dip), ddi_get_instance(dip)));
641 
642 		return (status);
643 	}
644 
645 	if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) {
646 		status = uppc_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp,
647 		    intr_flagp);
648 		if (status != ACPI_PSM_SUCCESS) {
649 			status = acpi_get_current_irq_resource(&acpipsmlnk,
650 			    pci_irqp, intr_flagp);
651 		}
652 	}
653 
654 	if (status == ACPI_PSM_SUCCESS) {
655 		acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp,
656 		    intr_flagp, &acpipsmlnk);
657 		psm_set_elcr(*pci_irqp, 1); 	/* set IRQ to PCI mode */
658 
659 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] "
660 		    "new irq %d for device %s, instance #%d\n",
661 		    *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip)));
662 	}
663 
664 	return (status);
665 }
666 
667 /*
668  * Configures the irq for the interrupt link device identified by
669  * acpipsmlnkp.
670  *
671  * Gets the current and the list of possible irq settings for the
672  * device. If uppc_unconditional_srs is not set, and the current
673  * resource setting is in the list of possible irq settings,
674  * current irq resource setting is passed to the caller.
675  *
676  * Otherwise, picks an irq number from the list of possible irq
677  * settings, and sets the irq of the device to this value.
678  * If prefer_crs is set, among a set of irq numbers in the list that have
679  * the least number of devices sharing the interrupt, we pick current irq
680  * resource setting if it is a member of this set.
681  *
682  * Passes the irq number in the value pointed to by pci_irqp, and
683  * polarity and sensitivity in the structure pointed to by dipintrflagp
684  * to the caller.
685  *
686  * Note that if setting the irq resource failed, but successfuly obtained
687  * the current irq resource settings, passes the current irq resources
688  * and considers it a success.
689  *
690  * Returns:
691  * ACPI_PSM_SUCCESS on success.
692  *
693  * ACPI_PSM_FAILURE if an error occured during the configuration or
694  * if a suitable irq was not found for this device, or if setting the
695  * irq resource and obtaining the current resource fails.
696  *
697  */
698 static int
699 uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
700     int *pci_irqp, iflag_t *dipintr_flagp)
701 {
702 	int i, min_share, foundnow, done = 0;
703 	int32_t irq;
704 	int32_t share_irq = -1;
705 	int32_t chosen_irq = -1;
706 	int cur_irq = -1;
707 	acpi_irqlist_t *irqlistp;
708 	acpi_irqlist_t *irqlistent;
709 
710 	if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp))
711 	    == ACPI_PSM_FAILURE) {
712 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Unable to determine "
713 		    "or assign IRQ for device %s, instance #%d: The system was "
714 		    "unable to get the list of potential IRQs from ACPI.",
715 		    ddi_get_name(dip), ddi_get_instance(dip)));
716 
717 		return (ACPI_PSM_FAILURE);
718 	}
719 
720 	if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
721 	    dipintr_flagp) == ACPI_PSM_SUCCESS) && (!uppc_unconditional_srs) &&
722 	    (cur_irq > 0)) {
723 
724 		if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL)
725 		    == ACPI_PSM_SUCCESS) {
726 
727 			acpi_free_irqlist(irqlistp);
728 			ASSERT(pci_irqp != NULL);
729 			*pci_irqp = cur_irq;
730 			return (ACPI_PSM_SUCCESS);
731 		}
732 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Could not find the "
733 		    "current irq %d for device %s, instance #%d in ACPI's "
734 		    "list of possible irqs for this device. Picking one from "
735 		    " the latter list.", cur_irq, ddi_get_name(dip),
736 		    ddi_get_instance(dip)));
737 
738 	}
739 
740 	irqlistent = irqlistp;
741 	min_share = 255;
742 
743 	while (irqlistent != NULL) {
744 
745 		for (foundnow = 0, i = 0; i < irqlistent->num_irqs; i++) {
746 
747 			irq = irqlistp->irqs[i];
748 
749 			if ((irq > MAX_ISA_IRQ) ||
750 			    (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) ||
751 			    (irq == 0))
752 				continue;
753 
754 			if (uppc_reserved_irqlist[irq])
755 				continue;
756 
757 			if (uppc_irq_shared_table[irq] == 0) {
758 				chosen_irq = irq;
759 				foundnow = 1;
760 				if (!(uppc_prefer_crs) || (irq == cur_irq)) {
761 					done = 1;
762 					break;
763 				}
764 			}
765 
766 			if ((uppc_irq_shared_table[irq] < min_share) ||
767 			    ((uppc_irq_shared_table[irq] == min_share) &&
768 			    (cur_irq == irq) && (uppc_prefer_crs))) {
769 				min_share = uppc_irq_shared_table[irq];
770 				share_irq = irq;
771 				foundnow = 1;
772 			}
773 		}
774 
775 		/* If we found an IRQ in the inner loop, save the details */
776 		if (foundnow && ((chosen_irq != -1) || (share_irq != -1))) {
777 			/*
778 			 * Copy the acpi_prs_private_t and flags from this
779 			 * irq list entry, since we found an irq from this
780 			 * entry.
781 			 */
782 			acpipsmlnkp->acpi_prs_prv = irqlistent->acpi_prs_prv;
783 			*dipintr_flagp = irqlistent->intr_flags;
784 		}
785 
786 		if (done)
787 			break;
788 
789 		/* Load the next entry in the irqlist */
790 		irqlistent = irqlistent->next;
791 	}
792 
793 	acpi_free_irqlist(irqlistp);
794 
795 	if (chosen_irq != -1)
796 		irq = chosen_irq;
797 	else if (share_irq != -1)
798 		irq = share_irq;
799 	else {
800 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Could not find a "
801 		    "suitable irq from the list of possible irqs for device "
802 		    "%s, instance #%d in ACPI's list of possible\n",
803 		    ddi_get_name(dip), ddi_get_instance(dip)));
804 
805 		return (ACPI_PSM_FAILURE);
806 	}
807 
808 
809 	UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Setting irq %d for device %s "
810 	    "instance #%d\n", irq, ddi_get_name(dip), ddi_get_instance(dip)));
811 
812 	if ((acpi_set_irq_resource(acpipsmlnkp, irq)) == ACPI_PSM_SUCCESS) {
813 		/*
814 		 * setting irq was successful, check to make sure CRS
815 		 * reflects that. If CRS does not agree with what we
816 		 * set, return the irq that was set.
817 		 */
818 
819 		if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
820 		    dipintr_flagp) == ACPI_PSM_SUCCESS) {
821 
822 			if (cur_irq != irq)
823 				UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: "
824 				    "IRQ resource set (irqno %d) for device %s "
825 				    "instance #%d, differs from current "
826 				    "setting irqno %d",
827 				    irq, ddi_get_name(dip),
828 				    ddi_get_instance(dip), cur_irq));
829 		}
830 		/*
831 		 * return the irq that was set, and not what CRS reports,
832 		 * since CRS has been seen to be bogus on some systems
833 		 */
834 		cur_irq = irq;
835 	} else {
836 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: set resource irq %d "
837 		    "failed for device %s instance #%d",
838 		    irq, ddi_get_name(dip), ddi_get_instance(dip)));
839 		if (cur_irq == -1)
840 			return (ACPI_PSM_FAILURE);
841 	}
842 
843 	ASSERT(pci_irqp != NULL);
844 	*pci_irqp = cur_irq;
845 	return (ACPI_PSM_SUCCESS);
846 }
847 
848 
849 /*ARGSUSED*/
850 static int
851 uppc_translate_irq(dev_info_t *dip, int irqno)
852 {
853 	char dev_type[16];
854 	int dev_len, pci_irq, devid, busid;
855 	ddi_acc_handle_t cfg_handle;
856 	uchar_t ipin, iline;
857 	iflag_t intr_flag;
858 
859 	if (dip == NULL) {
860 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno = %d"
861 		    " dip = NULL\n", irqno));
862 		return (irqno);
863 	}
864 
865 	if (!uppc_enable_acpi) {
866 		return (irqno);
867 	}
868 
869 	dev_len = sizeof (dev_type);
870 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(dip),
871 	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
872 	    &dev_len) != DDI_PROP_SUCCESS) {
873 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno %d"
874 		    "device %s instance %d no device_type\n", irqno,
875 		    ddi_get_name(dip), ddi_get_instance(dip)));
876 		return (irqno);
877 	}
878 
879 	if ((strcmp(dev_type, "pci") == 0) ||
880 	    (strcmp(dev_type, "pciex") == 0)) {
881 
882 		/* pci device */
883 		if (acpica_get_bdf(dip, &busid, &devid, NULL) != 0)
884 			return (irqno);
885 
886 		if (pci_config_setup(dip, &cfg_handle) != DDI_SUCCESS)
887 			return (irqno);
888 
889 		ipin = pci_config_get8(cfg_handle, PCI_CONF_IPIN) - PCI_INTA;
890 		iline = pci_config_get8(cfg_handle, PCI_CONF_ILINE);
891 		if (uppc_acpi_translate_pci_irq(dip, busid, devid,
892 		    ipin, &pci_irq, &intr_flag) == ACPI_PSM_SUCCESS) {
893 
894 			UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] new irq "
895 			    "%d old irq %d device %s, instance %d\n", pci_irq,
896 			    irqno, ddi_get_name(dip), ddi_get_instance(dip)));
897 
898 			/*
899 			 * Make sure pci_irq is within range.
900 			 * Otherwise, fall through and return irqno.
901 			 */
902 			if (pci_irq <= MAX_ISA_IRQ) {
903 				if (iline != pci_irq) {
904 					/*
905 					 * Update the device's ILINE byte,
906 					 * in case uppc_acpi_translate_pci_irq
907 					 * has choosen a different pci_irq
908 					 * than the BIOS has configured.
909 					 * Some chipsets use the value in
910 					 * ILINE to control interrupt routing,
911 					 * in conflict with the PCI spec.
912 					 */
913 					pci_config_put8(cfg_handle,
914 					    PCI_CONF_ILINE, pci_irq);
915 				}
916 				pci_config_teardown(&cfg_handle);
917 				return (pci_irq);
918 			}
919 		}
920 		pci_config_teardown(&cfg_handle);
921 
922 		/* FALLTHRU to common case - returning irqno */
923 	} else {
924 		/* non-PCI; assumes ISA-style edge-triggered */
925 		psm_set_elcr(irqno, 0); 	/* set IRQ to ISA mode */
926 
927 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: non-pci,"
928 		    "irqno %d device %s instance %d\n", irqno,
929 		    ddi_get_name(dip), ddi_get_instance(dip)));
930 	}
931 
932 	return (irqno);
933 }
934 
935 /*
936  * uppc_intr_enter() raises the ipl to the level of the current interrupt,
937  * and sends EOI to the pics.
938  * If interrupt is 7 or 15 and not spurious interrupt, send specific EOI
939  * else send non-specific EOI
940  * uppc_intr_enter() returns the new priority level,
941  * or -1 for spurious interrupt
942  */
943 static int
944 uppc_intr_enter(int ipl, int *vector)
945 {
946 	int newipl;
947 	int intno;
948 
949 	intno = (*vector);
950 
951 	ASSERT(intno < 256);
952 
953 	newipl = autovect[intno].avh_hi_pri;
954 
955 	/*
956 	 * During wait_till_seen() periods when interrupt vector is being
957 	 * removed in remove_av(), the removed hardware interrupt could
958 	 * trigger and got here with newipl 0.  It has to send EOI
959 	 * as usual but no need to call setspl and returns -1 like spurious.
960 	 */
961 	if ((intno & 7) != 7) {
962 		if (newipl)
963 			uppc_setspl(newipl);
964 		outb(MCMD_PORT, PIC_NSEOI);
965 		if (intno >= 8) {
966 			outb(SCMD_PORT, PIC_NSEOI);
967 		}
968 	} else { /* int was 7 or 15 */
969 		if (newipl && newipl <= ipl) { /* Check for spurious int */
970 			if (intno != 7)
971 				outb(MCMD_PORT, PIC_NSEOI);
972 			return (-1); /* Spurious int */
973 		} else {
974 			if (newipl)
975 				uppc_setspl(newipl);
976 			if (intno != 7) {
977 				outb(MCMD_PORT, PIC_NSEOI);
978 				outb(SCMD_PORT, PIC_SEOI_LVL7);
979 			} else  {
980 				outb(MCMD_PORT, PIC_SEOI_LVL7);
981 			}
982 		}
983 	}
984 
985 	if (newipl)
986 		return (newipl);
987 	else
988 		return (-1); /* not real spurious int */
989 }
990 
991 /*
992  * uppc_intr_exit() restores the old interrupt
993  * priority level after processing an interrupt.
994  * It is called with interrupts disabled, and does not enable interrupts.
995  */
996 /* ARGSUSED */
997 static void
998 uppc_intr_exit(int ipl, int vector)
999 {
1000 	uppc_setspl(ipl);
1001 }
1002 
1003 /*
1004  * uppc_setspl() loads new interrupt masks into the pics
1005  * based on input ipl.
1006  */
1007 /* ARGSUSED */
1008 static void
1009 uppc_setspl(int ipl)
1010 {
1011 	struct standard_pic *pp;
1012 	uint8_t smask, mmask;
1013 	uint8_t cursmask, curmmask;
1014 
1015 	pp = &pics0;
1016 	smask = pp->c_iplmask[ipl * 2];
1017 	mmask = pp->c_iplmask[ipl * 2 + 1];
1018 	cursmask = pp->c_curmask[0];
1019 	curmmask = pp->c_curmask[1];
1020 	if (cursmask == smask && curmmask == mmask)
1021 		return;
1022 	pp->c_curmask[0] = smask;
1023 	pp->c_curmask[1] = mmask;
1024 
1025 	if (cursmask != smask) {
1026 		/*
1027 		 * program new slave pic mask
1028 		 */
1029 		outb(SIMR_PORT, smask);
1030 	}
1031 	if (curmmask != mmask) {
1032 		/*
1033 		 * program new master pic mask
1034 		 */
1035 		outb(MIMR_PORT, mmask);
1036 	}
1037 	/*
1038 	 * read master to allow pics to settle
1039 	 */
1040 	(void) inb(MIMR_PORT);
1041 }
1042 
1043 /*
1044  * uppc_gethrtime() returns high resolution timer value
1045  */
1046 static hrtime_t
1047 uppc_gethrtime()
1048 {
1049 	hrtime_t timeval, temp;
1050 	unsigned int ctr0;
1051 	ulong_t oflags;
1052 
1053 	oflags = intr_clear(); /* disable ints */
1054 	lock_set(&uppc_gethrtime_lock);
1055 retry:
1056 	temp = hrtime_base;
1057 	outb(PITCTL_PORT, 0);	/* latch counter 0 */
1058 	/*
1059 	 * read counter 0
1060 	 */
1061 	ctr0 = inb(PITCTR0_PORT);
1062 	ctr0 |= inb(PITCTR0_PORT) << 8;
1063 	timeval = (hrtime_t)ctr0 * (NANOSEC / PIT_HZ);
1064 	if (temp != hrtime_base)
1065 		goto retry;
1066 	timeval -= temp;
1067 	if (timeval < uppc_lasthrtime)
1068 		timeval = uppc_lasthrtime;
1069 	uppc_lasthrtime = timeval;
1070 	lock_clear(&uppc_gethrtime_lock);
1071 	intr_restore(oflags);
1072 	return (timeval);
1073 }
1074