xref: /titanic_52/usr/src/uts/common/syscall/uadmin.c (revision a288e5a9793fdffe5e842d7e61ab45263e75eaca)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright 2013 Joyent, Inc.  All rights reserved.
 */

#include <sys/param.h>
#include <sys/types.h>
#include <sys/sysmacros.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/vfs.h>
#include <sys/vnode.h>
#include <sys/swap.h>
#include <sys/file.h>
#include <sys/proc.h>
#include <sys/var.h>
#include <sys/uadmin.h>
#include <sys/signal.h>
#include <sys/time.h>
#include <vm/seg_kmem.h>
#include <sys/modctl.h>
#include <sys/callb.h>
#include <sys/dumphdr.h>
#include <sys/debug.h>
#include <sys/ftrace.h>
#include <sys/cmn_err.h>
#include <sys/panic.h>
#include <sys/ddi.h>
#include <sys/ddi_periodic.h>
#include <sys/sunddi.h>
#include <sys/policy.h>
#include <sys/zone.h>
#include <sys/condvar.h>
#include <sys/thread.h>
#include <sys/sdt.h>

/*
 * Administrivia system call.  We provide this in two flavors: one for calling
 * from the system call path (uadmin), and the other for calling from elsewhere
 * within the kernel (kadmin).  Callers must beware that certain uadmin cmd
 * values (specifically A_SWAPCTL) are only supported by uadmin and not kadmin.
 */

extern ksema_t fsflush_sema;
kmutex_t ualock;
kcondvar_t uacond;
kthread_t *ua_shutdown_thread = NULL;

int sys_shutdown = 0;
volatile int fastreboot_dryrun = 0;

/*
 * Kill all user processes in said zone.  A special argument of ALL_ZONES is
 * passed in when the system as a whole is shutting down.  The lack of per-zone
 * process lists is likely to make the following a performance bottleneck on a
 * system with many zones.
 */
void
killall(zoneid_t zoneid)
{
	proc_t *p;

	ASSERT(zoneid != GLOBAL_ZONEID);
	/*
	 * Kill all processes except kernel daemons and ourself.
	 * Make a first pass to stop all processes so they won't
	 * be trying to restart children as we kill them.
	 */
	mutex_enter(&pidlock);
	for (p = practive; p != NULL; p = p->p_next) {
		if ((zoneid == ALL_ZONES || p->p_zone->zone_id == zoneid) &&
		    p->p_exec != NULLVP &&	/* kernel daemons */
		    p->p_as != &kas &&
		    p->p_stat != SZOMB) {
			mutex_enter(&p->p_lock);
			p->p_flag |= SNOWAIT;
			sigtoproc(p, NULL, SIGSTOP);
			mutex_exit(&p->p_lock);
		}
	}
	p = practive;
	while (p != NULL) {
		if ((zoneid == ALL_ZONES || p->p_zone->zone_id == zoneid) &&
		    p->p_exec != NULLVP &&	/* kernel daemons */
		    p->p_as != &kas &&
		    p->p_stat != SIDL &&
		    p->p_stat != SZOMB) {
			mutex_enter(&p->p_lock);
			if (sigismember(&p->p_sig, SIGKILL)) {
				mutex_exit(&p->p_lock);
				p = p->p_next;
			} else {
				sigtoproc(p, NULL, SIGKILL);
				mutex_exit(&p->p_lock);
				(void) cv_reltimedwait(&p->p_srwchan_cv,
				    &pidlock, hz, TR_CLOCK_TICK);
				p = practive;
			}
		} else {
			p = p->p_next;
		}
	}
	mutex_exit(&pidlock);
}

int
kadmin(int cmd, int fcn, void *mdep, cred_t *credp)
{
	int error = 0;
	char *buf;
	size_t buflen = 0;
	boolean_t invoke_cb = B_FALSE;

	/*
	 * We might be called directly by the kernel's fault-handling code, so
	 * we can't assert that the caller is in the global zone.
	 */

	/*
	 * Make sure that cmd is one of the valid <sys/uadmin.h> command codes
	 * and that we have appropriate privileges for this action.
	 */
	switch (cmd) {
	case A_FTRACE:
	case A_SHUTDOWN:
	case A_REBOOT:
	case A_REMOUNT:
	case A_FREEZE:
	case A_DUMP:
	case A_SDTTEST:
	case A_CONFIG:
		if (secpolicy_sys_config(credp, B_FALSE) != 0)
			return (EPERM);
		break;

	default:
		return (EINVAL);
	}

	/*
	 * Serialize these operations on ualock.  If it is held, the
	 * system should shutdown, reboot, or remount shortly, unless there is
	 * an error.  We need a cv rather than just a mutex because proper
	 * functioning of A_REBOOT relies on being able to interrupt blocked
	 * userland callers.
	 *
	 * We only clear ua_shutdown_thread after A_REMOUNT or A_CONFIG.
	 * Other commands should never return.
	 */
	if (cmd == A_SHUTDOWN || cmd == A_REBOOT || cmd == A_REMOUNT ||
	    cmd == A_CONFIG) {
		mutex_enter(&ualock);
		while (ua_shutdown_thread != NULL) {
			if (cv_wait_sig(&uacond, &ualock) == 0) {
				/*
				 * If we were interrupted, leave, and handle
				 * the signal (or exit, depending on what
				 * happened)
				 */
				mutex_exit(&ualock);
				return (EINTR);
			}
		}
		ua_shutdown_thread = curthread;
		mutex_exit(&ualock);
	}

	switch (cmd) {
	case A_SHUTDOWN:
	{
		proc_t *p = ttoproc(curthread);

		/*
		 * Release (almost) all of our own resources if we are called
		 * from a user context, however if we are calling kadmin() from
		 * a kernel context then we do not release these resources.
		 */
		if (p != &p0) {
			proc_is_exiting(p);
			if ((error = exitlwps(0)) != 0) {
				/*
				 * Another thread in this process also called
				 * exitlwps().
				 */
				mutex_enter(&ualock);
				ua_shutdown_thread = NULL;
				cv_signal(&uacond);
				mutex_exit(&ualock);
				return (error);
			}
			mutex_enter(&p->p_lock);
			p->p_flag |= SNOWAIT;
			sigfillset(&p->p_ignore);
			curthread->t_lwp->lwp_cursig = 0;
			curthread->t_lwp->lwp_extsig = 0;
			if (p->p_exec) {
				vnode_t *exec_vp = p->p_exec;
				p->p_exec = NULLVP;
				mutex_exit(&p->p_lock);
				VN_RELE(exec_vp);
			} else {
				mutex_exit(&p->p_lock);
			}

			pollcleanup();
			closeall(P_FINFO(curproc));
			relvm();

		} else {
			/*
			 * Reset t_cred if not set because much of the
			 * filesystem code depends on CRED() being valid.
			 */
			if (curthread->t_cred == NULL)
				curthread->t_cred = kcred;
		}

		/* indicate shutdown in progress */
		sys_shutdown = 1;

		/*
		 * Communcate that init shouldn't be restarted.
		 */
		zone_shutdown_global();

		killall(ALL_ZONES);
		/*
		 * If we are calling kadmin() from a kernel context then we
		 * do not release these resources.
		 */
		if (ttoproc(curthread) != &p0) {
			VN_RELE(PTOU(curproc)->u_cdir);
			if (PTOU(curproc)->u_rdir)
				VN_RELE(PTOU(curproc)->u_rdir);
			if (PTOU(curproc)->u_cwd)
				refstr_rele(PTOU(curproc)->u_cwd);

			PTOU(curproc)->u_cdir = rootdir;
			PTOU(curproc)->u_rdir = NULL;
			PTOU(curproc)->u_cwd = NULL;
		}

		/*
		 * Allow the reboot/halt/poweroff code a chance to do
		 * anything it needs to whilst we still have filesystems
		 * mounted, like loading any modules necessary for later
		 * performing the actual poweroff.
		 */
		if ((mdep != NULL) && (*(char *)mdep == '/')) {
			buf = i_convert_boot_device_name(mdep, NULL, &buflen);
			mdpreboot(cmd, fcn, buf);
		} else
			mdpreboot(cmd, fcn, mdep);

		/*
		 * Allow fsflush to finish running and then prevent it
		 * from ever running again so that vfs_unmountall() and
		 * vfs_syncall() can acquire the vfs locks they need.
		 */
		sema_p(&fsflush_sema);
		(void) callb_execute_class(CB_CL_UADMIN_PRE_VFS, NULL);

		vfs_unmountall();
		(void) VFS_MOUNTROOT(rootvfs, ROOT_UNMOUNT);
		vfs_syncall();

		/*
		 * Check for (and unregister) any DDI periodic handlers that
		 * still exist, as they most likely constitute resource leaks:
		 */
		ddi_periodic_fini();

		dump_ereports();
		dump_messages();

		invoke_cb = B_TRUE;

		/* FALLTHROUGH */
	}

	case A_REBOOT:
		if ((mdep != NULL) && (*(char *)mdep == '/')) {
			buf = i_convert_boot_device_name(mdep, NULL, &buflen);
			mdboot(cmd, fcn, buf, invoke_cb);
		} else
			mdboot(cmd, fcn, mdep, invoke_cb);
		/* no return expected */
		break;

	case A_CONFIG:
		switch (fcn) {
		case AD_UPDATE_BOOT_CONFIG:
#ifndef	__sparc
		{
			extern void fastboot_update_config(const char *);

			fastboot_update_config(mdep);
		}
#endif

			break;
		}
		/* Let other threads enter the shutdown path now */
		mutex_enter(&ualock);
		ua_shutdown_thread = NULL;
		cv_signal(&uacond);
		mutex_exit(&ualock);
		break;

	case A_REMOUNT:
		(void) VFS_MOUNTROOT(rootvfs, ROOT_REMOUNT);
		/* Let other threads enter the shutdown path now */
		mutex_enter(&ualock);
		ua_shutdown_thread = NULL;
		cv_signal(&uacond);
		mutex_exit(&ualock);
		break;

	case A_FREEZE:
	{
		/*
		 * This is the entrypoint for all suspend/resume actions.
		 */
		extern int cpr(int, void *);

		if (modload("misc", "cpr") == -1)
			return (ENOTSUP);
		/* Let the CPR module decide what to do with mdep */
		error = cpr(fcn, mdep);
		break;
	}

	case A_FTRACE:
	{
		switch (fcn) {
		case AD_FTRACE_START:
			(void) FTRACE_START();
			break;
		case AD_FTRACE_STOP:
			(void) FTRACE_STOP();
			break;
		default:
			error = EINVAL;
		}
		break;
	}

	case A_DUMP:
	{
		if (fcn == AD_NOSYNC) {
			in_sync = 1;
			break;
		}

		panic_bootfcn = fcn;
		panic_forced = 1;

		if ((mdep != NULL) && (*(char *)mdep == '/')) {
			panic_bootstr = i_convert_boot_device_name(mdep,
			    NULL, &buflen);
		} else
			panic_bootstr = mdep;

#ifndef	__sparc
		extern void fastboot_update_and_load(int, char *);

		fastboot_update_and_load(fcn, mdep);
#endif

		panic("forced crash dump initiated at user request");
		/*NOTREACHED*/
	}

	case A_SDTTEST:
	{
		DTRACE_PROBE7(test, int, 1, int, 2, int, 3, int, 4, int, 5,
		    int, 6, int, 7);
		break;
	}

	default:
		error = EINVAL;
	}

	return (error);
}

int
uadmin(int cmd, int fcn, uintptr_t mdep)
{
	int error = 0, rv = 0;
	size_t nbytes = 0;
	cred_t *credp = CRED();
	char *bootargs = NULL;
	int reset_status = 0;

	if (cmd == A_SHUTDOWN && fcn == AD_FASTREBOOT_DRYRUN) {
		ddi_walk_devs(ddi_root_node(), check_driver_quiesce,
		    &reset_status);
		if (reset_status != 0)
			return (EIO);
		else
			return (0);
	}

	/*
	 * The swapctl system call doesn't have its own entry point: it uses
	 * uadmin as a wrapper so we just call it directly from here.
	 */
	if (cmd == A_SWAPCTL) {
		if (get_udatamodel() == DATAMODEL_NATIVE)
			error = swapctl(fcn, (void *)mdep, &rv);
#if defined(_SYSCALL32_IMPL)
		else
			error = swapctl32(fcn, (void *)mdep, &rv);
#endif /* _SYSCALL32_IMPL */
		return (error ? set_errno(error) : rv);
	}

	/*
	 * Certain subcommands intepret a non-NULL mdep value as a pointer to
	 * a boot string.  We pull that in as bootargs, if applicable.
	 */
	if (mdep != NULL &&
	    (cmd == A_SHUTDOWN || cmd == A_REBOOT || cmd == A_DUMP ||
	    cmd == A_FREEZE || cmd == A_CONFIG)) {
		bootargs = kmem_zalloc(BOOTARGS_MAX, KM_SLEEP);
		if ((error = copyinstr((const char *)mdep, bootargs,
		    BOOTARGS_MAX, &nbytes)) != 0) {
			kmem_free(bootargs, BOOTARGS_MAX);
			return (set_errno(error));
		}
	}

	/*
	 * Invoke the appropriate kadmin() routine.
	 */
	if (getzoneid() != GLOBAL_ZONEID)
		error = zone_kadmin(cmd, fcn, bootargs, credp);
	else
		error = kadmin(cmd, fcn, bootargs, credp);

	if (bootargs != NULL)
		kmem_free(bootargs, BOOTARGS_MAX);
	return (error ? set_errno(error) : 0);
}