1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SATA_H 28 #define _SATA_H 29 30 #ifdef __cplusplus 31 extern "C" { 32 #endif 33 34 /* 35 * Generic SATA Host Adapter Implementation 36 */ 37 38 #include <sys/types.h> 39 #include <sys/scsi/scsi.h> 40 #include <sys/scsi/impl/services.h> 41 #include <sys/sata/sata_defs.h> 42 #include <sys/sata/sata_hba.h> 43 44 /* Common flags specifying current state of a port or an attached drive. */ 45 #define SATA_STATE_PROBING 0x000001 46 #define SATA_STATE_PROBED 0x000002 47 48 /* Statistics counters */ 49 struct sata_port_stats { 50 uint64_t link_lost; /* event counter */ 51 uint64_t link_established; /* event counter */ 52 uint64_t device_attached; /* event counter */ 53 uint64_t device_detached; /* event counter */ 54 uint64_t port_reset; /* event counter */ 55 uint64_t port_pwr_changed; /* event counter */ 56 }; 57 58 typedef struct sata_port_stats sata_port_stats_t; 59 60 struct sata_drive_stats { 61 uint64_t media_error; /* available ??? */ 62 uint64_t drive_reset; /* event counter */ 63 } sata_drv_stats_t; 64 65 typedef struct sata_drive_stats sata_drive_stats_t; 66 67 struct sata_ctrl_stats { 68 uint64_t ctrl_reset; /* event counter */ 69 uint64_t ctrl_pwr_change; /* event counter */ 70 }; 71 72 typedef struct sata_ctrl_stats sata_ctrl_stats_t; 73 74 75 /* 76 * SATA HBA instance info structure 77 */ 78 struct sata_hba_inst { 79 dev_info_t *satahba_dip; /* this HBA instance devinfo */ 80 struct sata_hba_inst *satahba_next; /* ptr to next sata_hba_inst */ 81 struct sata_hba_inst *satahba_prev; /* ptr to prev sata_hba_inst */ 82 struct scsi_hba_tran *satahba_scsi_tran; /* scsi_hba_tran */ 83 struct sata_hba_tran *satahba_tran; /* sata_hba_tran */ 84 kmutex_t satahba_mutex; /* sata hba cntrl mutex */ 85 struct taskq *satahba_taskq; /* cmd completion task queue */ 86 87 /* 88 * HBA event flags: 89 * SATA_EVNT_MAIN 90 * SATA_EVNT_PWR_LEVEL_CHANGED 91 * SATA_EVNT_SKIP 92 */ 93 uint_t satahba_event_flags; 94 95 struct sata_cport_info *satahba_dev_port[SATA_MAX_CPORTS]; 96 97 /* 98 * DEVCTL open flag: 99 * SATA_DEVCTL_SOPENED 100 * SATA_DEVCTL_EXOPENED 101 */ 102 uint_t satahba_open_flag; /* shared open flag */ 103 struct sata_ctrl_stats satahba_stats; /* HBA cntrl statistics */ 104 105 uint_t satahba_attached; /* HBA attaching: */ 106 /* 0 - not completed */ 107 /* 1 - completed */ 108 }; 109 110 typedef struct sata_hba_inst sata_hba_inst_t; 111 112 /* 113 * SATA controller's device port info and state. 114 * This structure is pointed to by the sata_hba_inst.satahba_dev_port[x] 115 * where x is a device port number. 116 * cport_state holds port state flags, defined in sata_hba.h file. 117 * cport_event_flags holds SATA_EVNT_* flags defined in this file and in 118 * sata_hba.h file. 119 * cport_dev_type holds SATA_DTYPE_* types defined in sata_hba.h file. 120 */ 121 struct sata_cport_info { 122 sata_address_t cport_addr; /* this port SATA address */ 123 kmutex_t cport_mutex; /* port mutex */ 124 125 /* 126 * Port state flags 127 * SATA_STATE_UNKNOWN 128 * SATA_STATE_PROBING 129 * SATA_STATE_PROBED 130 * SATA_STATE_READY 131 * SATA_PSTATE_PWRON 132 * SATA_PSTATE_PWROFF 133 * SATA_PSTATE_SHUTDOWN 134 * SATA_PSTATE_FAILED 135 */ 136 uint32_t cport_state; 137 138 /* 139 * Port event flags: 140 * SATA_EVNT_DEVICE_ATTACHED 141 * SATA_EVNT_DEVICE_DETACHED 142 * SATA_EVNT_LINK_LOST 143 * SATA_EVNT_LINK_ESTABLISHED 144 * SATA_EVNT_PORT_FAILED 145 * SATA_EVNT_PWR_LEVEL_CHANGED 146 */ 147 uint32_t cport_event_flags; 148 149 struct sata_port_scr cport_scr; /* Port status and ctrl regs */ 150 151 /* 152 * Attached device type: 153 * SATA_DTYPE_NONE 154 * SATA_DTYPE_ATADISK 155 * SATA_DTYPE_ATAPICD 156 * SATA_DTYPE_ATAPINONCD 157 * SATA_DTYPE_PMULT 158 * SATA_DTYPE_UNKNOWN 159 */ 160 uint32_t cport_dev_type; 161 union { 162 struct sata_drive_info *cport_sata_drive; /* Attached drive info */ 163 struct sata_pmult_info *cport_sata_pmult; /* Attached Port Mult */ 164 } cport_devp; 165 /* lbolt value at link lost */ 166 clock_t cport_link_lost_time; 167 /* lbolt value @ dev attached */ 168 clock_t cport_dev_attach_time; 169 170 struct sata_port_stats cport_stats; /* Port statistics */ 171 172 boolean_t cport_tgtnode_clean; /* Target node usable */ 173 }; 174 175 typedef struct sata_cport_info sata_cport_info_t; 176 177 /* 178 * Attached SATA drive info and state. 179 * This structure is pointed to by sata_cport_info's cport_sata_drive field 180 * when a drive is attached directly to a controller device port. 181 */ 182 struct sata_drive_info { 183 sata_address_t satadrv_addr; /* this drive SATA address */ 184 185 /* 186 * Drive state flags 187 * SATA_STATE_UNKNOWN 188 * SATA_STATE_PROBING 189 * SATA_STATE_PROBED 190 * SATA_STATE_READY 191 * SATA_DSTATE_PWR_ACTIVE 192 * SATA_DSTATE_PWR_IDLE 193 * SATA_DSTATE_RESET 194 * SATA_DSTATE_FAILED 195 */ 196 uint32_t satadrv_state; 197 198 /* 199 * drive event flags: 200 * SATA_EVNT_DRIVE_RESET 201 */ 202 uint32_t satadrv_event_flags; 203 /* 204 * lbolt value @ start of 205 * device reset processing 206 */ 207 clock_t satadrv_reset_time; 208 /* 209 * Attached device type: 210 * SATA_DTYPE_ATADISK 211 * SATA_DTYPE_ATAPICD 212 * SATA_DTYPE_ATAPINONCD 213 */ 214 uint32_t satadrv_type; 215 216 uint32_t satadrv_status_reg; /* drive status reg */ 217 uint32_t satadrv_error_reg; /* drive error reg */ 218 uint16_t satadrv_features_support; /* drive features support */ 219 uint16_t satadrv_queue_depth; /* drive queue depth */ 220 uint16_t satadrv_atapi_cdb_len; /* atapi supported cdb length */ 221 uint16_t satadrv_atapi_trans_ver; /* atapi transport version */ 222 uint16_t satadrv_settings; /* drive settings flags */ 223 uint16_t satadrv_features_enabled; /* drive features enabled */ 224 uint64_t satadrv_capacity; /* drive capacity */ 225 uint64_t satadrv_max_queue_depth; /* maximum queue depth */ 226 sata_id_t satadrv_id; /* Device Identify Data */ 227 struct sata_drive_stats satadrv_stats; /* drive statistics */ 228 }; 229 230 typedef struct sata_drive_info sata_drive_info_t; 231 232 _NOTE(SCHEME_PROTECTS_DATA("unshared data", sata_drive_info)) 233 234 235 /* Port Multiplier & host port info and state */ 236 struct sata_pmult_info { 237 sata_address_t pmult_addr; /* this PMult SATA Address */ 238 kmutex_t pmult_mutex; /* pmult (host port) mutex */ 239 240 /* 241 * PMult state flags 242 * SATA_STATE_UNKNOWN 243 * SATA_STATE_PROBING 244 * SATA_STATE_PROBED 245 * SATA_STATE_READY 246 * SATA_PSTATE_FAILED 247 */ 248 uint32_t pmult_state; 249 uint32_t pmult_event_flags; /* Undefined for now */ 250 struct sata_port_scr pmult_scr; /* Host port SCR block */ 251 uint32_t pmult_num_dev_ports; /* Number of data ports */ 252 struct sata_pmport_info *pmult_dev_port[SATA_MAX_PMPORTS - 1]; 253 }; 254 255 typedef struct sata_pmult_info sata_pmult_info_t; 256 257 /* Port Multiplier's device port info & state */ 258 struct sata_pmport_info { 259 sata_address_t pmport_addr; /* this SATA port address */ 260 kmutex_t pmport_mutex; /* pmult device port mutex */ 261 262 /* 263 * Port state flags 264 * SATA_STATE_UNKNOWN 265 * SATA_STATE_PROBING 266 * SATA_STATE_PROBED 267 * SATA_STATE_READY 268 * SATA_PSTATE_PWRON 269 * SATA_PSTATE_PWROFF 270 * SATA_PSTATE_SHUTDOWN 271 * SATA_PSTATE_FAILED 272 */ 273 uint32_t pmport_state; 274 275 /* 276 * Port event flags: 277 * SATA_EVNT_DEVICE_ATTACHED 278 * SATA_EVNT_DEVICE_DETACHED 279 * SATA_EVNT_LINK_LOST 280 * SATA_EVNT_LINK_ESTABLISHED 281 * SATA_EVNT_PORT_FAILED 282 * SATA_EVNT_PWR_LEVEL_CHANGED 283 */ 284 uint32_t pmport_event_flags; 285 286 struct sata_port_scr pmport_scr; /* PMult device port scr */ 287 288 /* 289 * Attached device type: 290 * SATA_DTYPE_NONE 291 * SATA_DTYPE_ATADISK 292 * SATA_DTYPE_ATAPICD 293 * SATA_DTYPE_ATAPINONCD 294 * SATA_DTYPE_UNKNOWN 295 */ 296 uint32_t pmport_dev_type; 297 298 struct sata_drive_info *pmport_sata_drive; /* Attached drive info */ 299 300 /* lbolt value at link lost */ 301 clock_t pmport_link_lost_time; 302 /* lbolt value @ dev attached */ 303 clock_t pmport_dev_attach_time; 304 305 struct sata_port_stats pmport_stats; /* Port statistics */ 306 307 boolean_t pmport_tgtnode_clean; /* Target node usable */ 308 }; 309 310 typedef struct sata_pmport_info sata_pmport_info_t; 311 312 /* 313 * Port SSTATUS register (sata_port_scr sport_sstatus field). 314 * Link bits are valid only in port active state. 315 */ 316 #define SATA_PORT_DEVLINK_UP 0x00000103 /* Link with dev established */ 317 #define SATA_PORT_DEVLINK_UP_MASK 0x0000010F /* Mask for link bits */ 318 319 /* 320 * Port state clear mask (cport_state and pmport_state fields). 321 * SATA_PSTATE_SHUTDOWN and power state are preserved. 322 */ 323 #define SATA_PORT_STATE_CLEAR_MASK (~(SATA_PSTATE_SHUTDOWN)) 324 325 /* 326 * Valid i.e.supported device types mask (cport_dev_type, satadrv_type, 327 * pmult_dev_type fields). 328 * ATA disks and ATAPI CD/DVD now. 329 */ 330 #define SATA_VALID_DEV_TYPE (SATA_DTYPE_ATADISK | \ 331 SATA_DTYPE_ATAPICD) 332 333 /* 334 * Device feature_support (satadrv_features_support) 335 */ 336 #define SATA_DEV_F_DMA 0x01 337 #define SATA_DEV_F_LBA28 0x02 338 #define SATA_DEV_F_LBA48 0x04 339 #define SATA_DEV_F_NCQ 0x08 340 #define SATA_DEV_F_SATA1 0x10 341 #define SATA_DEV_F_SATA2 0x20 342 #define SATA_DEV_F_TCQ 0x40 /* Non NCQ tagged queuing */ 343 344 /* 345 * Device features enabled (satadrv_features_enabled) 346 */ 347 #define SATA_DEV_F_E_TAGGED_QING 0x01 /* Tagged queuing enabled */ 348 #define SATA_DEV_F_E_UNTAGGED_QING 0x02 /* Untagged queuing enabled */ 349 350 /* 351 * Drive settings flags (satdrv_settings) 352 */ 353 #define SATA_DEV_READ_AHEAD 0x0001 /* Read Ahead enabled */ 354 #define SATA_DEV_WRITE_CACHE 0x0002 /* Write cache ON */ 355 #define SATA_DEV_DMA 0x0004 /* DMA selected */ 356 #define SATA_DEV_SERIAL_FEATURES 0x8000 /* Serial ATA feat. enabled */ 357 #define SATA_DEV_ASYNCH_NOTIFY 0x2000 /* Asynch-event enabled */ 358 #define SATA_DEV_RMSN 0x0100 /* Rem Media Stat Notfc enbl */ 359 360 /* 361 * Internal event and flags. 362 * These flags are set in the *_event_flags fields of various structures. 363 * Events and lock flags defined below are used internally by the 364 * SATA framework (they are not reported by SATA HBA drivers). 365 */ 366 #define SATA_EVNT_MAIN 0x80000000 367 #define SATA_EVNT_SKIP 0x40000000 368 #define SATA_EVNT_INPROC_DEVICE_RESET 0x08000000 369 #define SATA_EVNT_CLEAR_DEVICE_RESET 0x04000000 370 #define SATA_EVNT_TARGET_NODE_CLEANUP 0x00000100 371 #define SATA_EVNT_AUTOONLINE_DEVICE 0x00000200 372 373 /* 374 * Lock flags - used to serialize configuration operations 375 * on ports and devices. 376 * SATA_EVNT_LOCK_PORT_BUSY is set by event daemon to prevent 377 * simultaneous cfgadm operations. 378 * SATA_APCTL_LOCK_PORT_BUSY is set by cfgadm ioctls to prevent 379 * simultaneous event processing. 380 */ 381 #define SATA_EVNT_LOCK_PORT_BUSY 0x00800000 382 #define SATA_APCTL_LOCK_PORT_BUSY 0x00400000 383 384 /* Mask for port events */ 385 #define SATA_EVNT_PORT_EVENTS (SATA_EVNT_DEVICE_ATTACHED | \ 386 SATA_EVNT_DEVICE_DETACHED | \ 387 SATA_EVNT_LINK_LOST | \ 388 SATA_EVNT_LINK_ESTABLISHED | \ 389 SATA_EVNT_PORT_FAILED | \ 390 SATA_EVNT_TARGET_NODE_CLEANUP | \ 391 SATA_EVNT_AUTOONLINE_DEVICE) 392 /* Mask for drive events */ 393 #define SATA_EVNT_DRIVE_EVENTS (SATA_EVNT_DEVICE_RESET | \ 394 SATA_EVNT_INPROC_DEVICE_RESET) 395 #define SATA_EVNT_CONTROLLER_EVENTS SATA_EVNT_PWR_LEVEL_CHANGED 396 397 /* Delays and timeout duration definitions */ 398 #define SATA_EVNT_DAEMON_SLEEP_TIME 50000 /* 50 ms */ 399 #define SATA_EVNT_DAEMON_TERM_TIMEOUT 100000 /* 100 ms */ 400 #define SATA_EVNT_DAEMON_TERM_WAIT 60000000 /* 60 s */ 401 #define SATA_EVNT_LINK_LOST_TIMEOUT 1000000 /* 1 s */ 402 403 #define SATA_DEV_IDENTIFY_TIMEOUT 60000000 /* 60 s, device enumeration */ 404 #define SATA_DEV_REPROBE_TIMEOUT 30000000 /* 30 s, dev resp after rst */ 405 #define SATA_DEV_RETRY_DLY 10000 /* 10 ms */ 406 407 /* DEVICE IDENTIFY and device initialization retry delay */ 408 #define SATA_DEV_IDENTIFY_RETRY 1 409 #define SATA_DEV_IDENTIFY_NORETRY 0 410 411 /* 412 * sata_scsi's hba_open_flag: field indicating open devctl instance. 413 * 0 = closed, 1 = shared open, 2 = exclusive open. 414 */ 415 #define SATA_DEVCTL_CLOSED 0 416 #define SATA_DEVCTL_SOPENED 1 417 #define SATA_DEVCTL_EXOPENED 2 418 419 /* 420 * sata_pkt_txlate structure contains info about resources allocated 421 * for the packet 422 * Address of this structure is stored in scsi_pkt.pkt_ha_private and 423 * in sata_pkt.sata_hba_private fields, so all three strucures are 424 * cross-linked, with sata_pkt_txlate as a centerpiece. 425 */ 426 427 typedef struct sata_pkt_txlate { 428 struct sata_hba_inst *txlt_sata_hba_inst; 429 struct scsi_pkt *txlt_scsi_pkt; 430 struct sata_pkt *txlt_sata_pkt; 431 ddi_dma_handle_t txlt_buf_dma_handle; 432 uint_t txlt_flags; /* data-in / data-out */ 433 uint_t txlt_num_dma_win; /* number of DMA windows */ 434 uint_t txlt_cur_dma_win; /* current DMA window */ 435 436 /* cookies in the current DMA window */ 437 uint_t txlt_curwin_num_dma_cookies; 438 439 /* processed dma cookies in current DMA win */ 440 uint_t txlt_curwin_processed_dma_cookies; 441 size_t txlt_total_residue; 442 ddi_dma_cookie_t txlt_dma_cookie; /* default dma cookie */ 443 int txlt_dma_cookie_list_len; /* alloc list len */ 444 ddi_dma_cookie_t *txlt_dma_cookie_list; /* dma cookie list */ 445 int txlt_num_dma_cookies; /* dma cookies in list */ 446 447 /* temporary buffer access handle */ 448 ddi_acc_handle_t txlt_tmp_buf_handle; 449 caddr_t txlt_tmp_buf; /* temp buffer address */ 450 } sata_pkt_txlate_t; 451 452 _NOTE(SCHEME_PROTECTS_DATA("unshared data", sata_pkt_txlate)) 453 _NOTE(SCHEME_PROTECTS_DATA("unshared data", scsi_pkt)) 454 455 456 /* 457 * Additional scsi sense code definitions. 458 * These definition should eventually be moved to scsi header file 459 * usr/src/uts/common/sys/scsi/generic/sense.h 460 */ 461 #define SD_SCSI_ASC_NO_ADD_SENSE 0x00 462 #define SD_SCSI_ASC_LU_NOT_READY 0x04 463 #define SD_SCSI_ASC_WRITE_ERR 0x0c 464 #define SD_SCSI_ASC_UNREC_READ_ERR 0x11 465 #define SD_SCSI_ASC_INVALID_COMMAND_CODE 0x20 466 #define SD_SCSI_ASC_LBA_OUT_OF_RANGE 0x21 467 #define SD_SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 468 #define SD_SCSI_ASC_INVALID_FIELD_IN_PARAMS_LIST 0x26 469 #define SD_SCSI_ASC_RESET 0x29 470 #define SD_SCSI_ASC_SAVING_PARAMS_NOT_SUPPORTED 0x39 471 472 473 /* SCSI defs missing from scsi headers */ 474 /* Missing from sys/scsi/generic/commands.h */ 475 #define SCMD_SYNCHRONIZE_CACHE_G1 0x91 476 /* 477 * Missing from sys/scsi/impl/mode.h, although defined 478 * in sys/scsi/targets/sddefs.h as MODEPAGE_ERR_RECOV 479 */ 480 #define MODEPAGE_RW_ERRRECOV 0x01 /* read/write recovery */ 481 482 /* 483 * Macros for accessing various structure fields 484 */ 485 486 #define SATA_TRAN(sata_hba_inst) \ 487 sata_hba_inst->satahba_tran 488 489 #define SATA_DIP(sata_hba_inst) \ 490 sata_hba_inst->satahba_dip 491 492 #define SATA_NUM_CPORTS(sata_hba_inst) \ 493 sata_hba_inst->satahba_tran->sata_tran_hba_num_cports 494 495 #define SATA_QDEPTH(sata_hba_inst) \ 496 sata_hba_inst->satahba_tran->sata_tran_hba_qdepth 497 498 #define SATA_FEATURES(sata_hba_inst) \ 499 sata_hba_inst->satahba_tran->sata_tran_hba_features_support 500 501 #define SATA_DMA_ATTR(sata_hba_inst) \ 502 sata_hba_inst->satahba_tran->sata_tran_hba_dma_attr 503 504 #define SATA_START_FUNC(sata_hba_inst) \ 505 sata_hba_inst->satahba_tran->sata_tran_start 506 507 #define SATA_ABORT_FUNC(sata_hba_inst) \ 508 sata_hba_inst->satahba_tran->sata_tran_abort 509 510 #define SATA_RESET_DPORT_FUNC(sata_hba_inst) \ 511 sata_hba_inst->satahba_tran->sata_tran_reset_dport 512 513 #define SATA_PORT_DEACTIVATE_FUNC(sata_hba_inst) \ 514 (sata_hba_inst->satahba_tran->sata_tran_hotplug_ops == NULL ? \ 515 NULL : \ 516 sata_hba_inst->satahba_tran->sata_tran_hotplug_ops->\ 517 sata_tran_port_deactivate) 518 519 #define SATA_PORT_ACTIVATE_FUNC(sata_hba_inst) \ 520 (sata_hba_inst->satahba_tran->sata_tran_hotplug_ops == NULL ? \ 521 NULL : \ 522 sata_hba_inst->satahba_tran->sata_tran_hotplug_ops->\ 523 sata_tran_port_activate) 524 525 #define SATA_PROBE_PORT_FUNC(sata_hba_inst) \ 526 sata_hba_inst->satahba_tran->sata_tran_probe_port 527 528 #define SATA_SELFTEST_FUNC(sata_hba_inst) \ 529 sata_hba_inst->satahba_tran->sata_tran_selftest 530 531 #define SATA_CPORT_MUTEX(sata_hba_inst, cport) \ 532 sata_hba_inst->satahba_dev_port[cport]->cport_mutex 533 534 #define SATA_CPORT_INFO(sata_hba_inst, cport) \ 535 sata_hba_inst->satahba_dev_port[cport] 536 537 #define SATA_CPORT_STATE(sata_hba_inst, cport) \ 538 sata_hba_inst->satahba_dev_port[cport]->cport_state 539 540 #define SATA_CPORT_EVENT_FLAGS(sata_hba_inst, cport) \ 541 sata_hba_inst->satahba_dev_port[cport]->cport_event_flags 542 543 #define SATA_CPORT_SCR(sata_hba_inst, cport) \ 544 sata_hba_inst->satahba_dev_port[cport]->cport_scr 545 546 #define SATA_CPORT_DEV_TYPE(sata_hba_inst, cport) \ 547 sata_hba_inst->satahba_dev_port[cport]->cport_dev_type 548 549 #define SATA_CPORT_DRV_INFO(sata_hba_inst, cport) \ 550 sata_hba_inst->satahba_dev_port[cport]->cport_devp.cport_sata_drive 551 552 #define SATA_CPORTINFO_DRV_TYPE(cportinfo) \ 553 cportinfo->cport_dev_type 554 555 #define SATA_CPORTINFO_DRV_INFO(cportinfo) \ 556 cportinfo->cport_devp.cport_sata_drive 557 558 #define SATA_CPORTINFO_PMULT_INFO(cportinfo) \ 559 cportinfo->cport_devp.cport_sata_pmult 560 561 #define SATA_PMULT_INFO(sata_hba_inst, cport) \ 562 sata_hba_inst->satahba_dev_port[cport]->cport_devp.cport_sata_pmult 563 564 #define SATA_NUM_PMPORTS(sata_hba_inst, cport) \ 565 sata_hba_inst->satahba_dev_port[cport]->\ 566 cport_devp.cport_sata_pmult->pmult_num_dev_ports 567 568 #define SATA_PMPORT_INFO(sata_hba_inst, cport, pmport) \ 569 sata_hba_inst->satahba_dev_port[cport]->\ 570 cport_devp.cport_sata_pmult->pmult_dev_port[pmport] 571 572 #define SATA_PMPORT_DRV_INFO(sata_hba_inst, cport, pmport) \ 573 sata_hba_inst->satahba_dev_port[cport]->\ 574 cport_devp.cport_sata_pmult->pmult_dev_port[pmport]->\ 575 pmport_sata_drive 576 577 #define SATA_PMPORT_STATE(sata_hba_inst, cport, pmport) \ 578 sata_hba_inst->satahba_dev_port[cport]->\ 579 cport_devp.cport_sata_pmult->pmult_dev_port[pmport]->pmport_state 580 581 #define SATA_PMPORT_SCR(sata_hba_inst, cport, pmport) \ 582 sata_hba_inst->satahba_dev_port[cport]->\ 583 cport_devp.cport_sata_pmult->pmult_dev_port[pmport]->pmport_scr 584 585 #define SATA_PMPORT_DEV_TYPE(sata_hba_inst, cport, pmport) \ 586 sata_hba_inst->satahba_dev_port[cport]->\ 587 cport_devp.cport_sata_pmult->pmult_dev_port[pmport]->pmport_dev_type 588 589 #define SATA_PMPORTINFO_DRV_TYPE(pmportinfo) \ 590 pmportinfo->pmport_dev_type 591 592 #define SATA_PMPORTINFO_DRV_INFO(pmportinfo) \ 593 pmportinfo->pmport_sata_drive 594 595 #define SATA_TXLT_HBA_INST(spx) \ 596 spx->txlt_sata_hba_inst 597 598 #define SATA_TXLT_CPORT(spx) \ 599 spx->txlt_sata_pkt->satapkt_device.satadev_addr.cport 600 601 #define SATA_TXLT_CPORT_MUTEX(spx) \ 602 spx->txlt_sata_hba_inst->\ 603 satahba_dev_port[spx->txlt_sata_pkt->\ 604 satapkt_device.satadev_addr.cport]->cport_mutex 605 606 #define SATA_TXLT_TASKQ(spx) \ 607 spx->txlt_sata_hba_inst->\ 608 satahba_taskq 609 610 /* 611 * Minor number construction for devctl and attachment point nodes. 612 * All necessary information has to be encoded in NBITSMINOR32 bits. 613 * 614 * Devctl node minor number: 615 * ((controller_instance << SATA_CNTRL_INSTANCE_SHIFT) | SATA_DEVCTL_NODE) 616 * 617 * Attachment point node minor number has to include controller 618 * instance (7 bits), controller port number (5 bits) and port multiplier 619 * device port number (4 bits) and port multiplier device port 620 * indicator (1 bit). Additionally, a single bit is used to 621 * differentiate between attachment point node and device control node. 622 * 623 * Attachment point minor number: 624 * ((controller_instance << SATA_CNTRL_INSTANCE_SHIFT) | SATA_AP_NODE | 625 * [(port_multiplier_device_port << SATA_PMULT_PORT_SHIFT) | SATA_PMULT_AP] | 626 * (controller_port)) 627 * 628 * 17 bits are used (if 64 instances of controllers are expected) 629 * bit 18 is reserved for future use. 630 * 631 * -------------------------------------------------------- 632 * |17|16|15|14|13|12|11|10 |09|08|07|06|05|04|03|02|01|00| 633 * -------------------------------------------------------- 634 * | R| c| c| c| c| c| c|a/d|pm|pp|pp|pp|pp|cp|cp|cp|cp|cp| 635 * -------------------------------------------------------- 636 * Where: 637 * cp - device port number on the HBA SATA controller 638 * pp - device port number on the port multiplier 639 * pm - 0 - target attached to controller device port 640 * 1 - target attached to port multiplier's device port 641 * a/d - 0 - devctl node 642 * 1 - attachment point node 643 * c - controller number 644 * R - reserved bit 645 */ 646 647 #define SATA_AP_NODE 0x400 /* Attachment Point node */ 648 #define SATA_DEVCTL_NODE 0x000 /* DEVCTL node */ 649 #define SATA_PMULT_AP 0x200 /* device on PMult port */ 650 #define SATA_PMULT_PORT_SHIFT 5 651 #define SATA_CNTRL_INSTANCE_SHIFT 11 652 #define SATA_CPORT_MASK 0x1f /* 32 device ports */ 653 #define SATA_PMULT_PORT_MASK 0xf /* 15 device ports */ 654 #define SATA_CNTRL_INSTANCE_MASK 0x03F /* 64 controllers */ 655 656 /* Macro for creating devctl node minor number */ 657 #define SATA_MAKE_DEVCTL_MINOR(controller_instance) \ 658 ((controller_instance << SATA_CNTRL_INSTANCE_SHIFT) | \ 659 SATA_DEVCTL_NODE) 660 661 /* Macro for creating an attachment point node minor number */ 662 #define SATA_MAKE_AP_MINOR(cntrl_instance, cport, pmport, qual) \ 663 (qual & (SATA_ADDR_PMPORT | SATA_ADDR_DPMPORT) ? \ 664 (((cntrl_instance) << SATA_CNTRL_INSTANCE_SHIFT) | \ 665 SATA_AP_NODE | SATA_PMULT_AP | \ 666 (pmport << SATA_PMULT_PORT_SHIFT) | cport) : \ 667 (((cntrl_instance) << SATA_CNTRL_INSTANCE_SHIFT) | \ 668 SATA_AP_NODE | cport)) 669 670 /* Macro retrieving controller number from a minor number */ 671 #define SATA_MINOR2INSTANCE(minor) \ 672 ((minor >> SATA_CNTRL_INSTANCE_SHIFT) & SATA_CNTRL_INSTANCE_MASK) 673 674 /* 675 * Macro for creating an attachment point number from sata address. 676 * Address qualifier has to be one of: 677 * SATA_ADDR_DCPORT, SATA_ADDR_DPMPORT, SATA_ADDR_CPORT or SATA_ADDR_PMPORT 678 */ 679 #define SATA_MAKE_AP_NUMBER(cport, pmport, qual) \ 680 ((qual & (SATA_ADDR_PMPORT | SATA_ADDR_DPMPORT)) ? \ 681 (SATA_PMULT_AP | (pmport << SATA_PMULT_PORT_SHIFT) | cport) : \ 682 (cport)) 683 684 /* 685 * SCSI target number format 686 * 687 * ------------------------------- 688 * | 9| 8| 7| 6| 5| 4| 3| 2| 1| 0| Bit number 689 * ------------------------------- 690 * |pm|pp|pp|pp|pp|cp|cp|cp|cp|cp| 691 * ------------------------------- 692 * Where: 693 * cp - device port number on the HBA SATA controller 694 * pp - device port number on the port multiplier 695 * pm - 0 - target attached to controller device port 696 * 1 - target attached to port multiplier's device port 697 */ 698 699 /* SATA ports to SCSI target number translation */ 700 701 #define SATA_TO_SCSI_TARGET(cport, pmport, qual) \ 702 (qual == SATA_ADDR_DCPORT ? cport : \ 703 (cport | (pmport << SATA_PMULT_PORT_SHIFT) | SATA_PMULT_AP)) 704 705 /* SCSI target number to SATA cntrl/pmport/cport translations */ 706 #define SCSI_TO_SATA_CPORT(scsi_target) \ 707 (scsi_target & SATA_CPORT_MASK) 708 709 #define SCSI_TO_SATA_PMPORT(scsi_target) \ 710 ((scsi_target >> SATA_PMULT_PORT_SHIFT) & SATA_PMULT_PORT_MASK) 711 712 #define SCSI_TO_SATA_ADDR_QUAL(scsi_target) \ 713 ((scsi_target & SATA_PMULT_AP) ? SATA_ADDR_DPMPORT : \ 714 SATA_ADDR_DCPORT) 715 716 717 /* Debug flags */ 718 #if DEBUG 719 720 #define SATA_DEBUG 721 #define SATA_DBG_SCSI_IF 1 722 #define SATA_DBG_HBA_IF 2 723 #define SATA_DBG_NODES 4 724 #define SATA_DBG_IOCTL_IF 8 725 #define SATA_DBG_EVENTS 0x10 726 #define SATA_DBG_EVENTS_PROC 0x20 727 #define SATA_DBG_EVENTS_PROCPST 0x40 728 #define SATA_DBG_EVENTS_CNTRL 0x80 729 #define SATA_DBG_EVENTS_DAEMON 0x100 730 #define SATA_DBG_DMA_SETUP 0x400 731 #define SATA_DBG_DEV_SETTINGS 0x800 732 #define SATA_DBG_ATAPI 0x1000 733 #define SATA_DBG_ATAPI_PACKET 0x8000 734 #define SATA_DBG_INTR_CTX 0x10000 735 736 typedef struct sata_atapi_cmd { 737 uint8_t acdb[SATA_ATAPI_MAX_CDB_LEN]; 738 uint8_t arqs[SATA_ATAPI_RQSENSE_LEN]; 739 uint_t sata_pkt_reason; 740 uint_t scsi_pkt_reason; 741 } sata_atapi_cmd_t; 742 743 /* Debug macros */ 744 #define SATADBG1(flag, sata, format, arg1) \ 745 if (sata_debug_flags & (flag)) { \ 746 sata_log(sata, CE_CONT, format, arg1); \ 747 } 748 749 #define SATADBG2(flag, sata, format, arg1, arg2) \ 750 if (sata_debug_flags & (flag)) { \ 751 sata_log(sata, CE_CONT, format, arg1, arg2); \ 752 } 753 754 #define SATADBG3(flag, sata, format, arg1, arg2, arg3) \ 755 if (sata_debug_flags & (flag)) { \ 756 sata_log(sata, CE_CONT, format, arg1, arg2, arg3); \ 757 } 758 #else 759 760 #define SATADBG1(flag, dip, frmt, arg1) 761 #define SATADBG2(flag, dip, frmt, arg1, arg2) 762 #define SATADBG3(flag, dip, frmt, arg1, arg2, arg3) 763 764 #endif 765 766 /* sata_rev_tag 1.38 */ 767 768 #ifdef __cplusplus 769 } 770 #endif 771 772 #endif /* _SATA_H */ 773