xref: /titanic_52/usr/src/uts/common/sys/dtrace.h (revision ac448965596bc1c42f7accb3023f48d5fa9b8180)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef _SYS_DTRACE_H
28 #define	_SYS_DTRACE_H
29 
30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
31 
32 #ifdef	__cplusplus
33 extern "C" {
34 #endif
35 
36 /*
37  * DTrace Dynamic Tracing Software: Kernel Interfaces
38  *
39  * Note: The contents of this file are private to the implementation of the
40  * Solaris system and DTrace subsystem and are subject to change at any time
41  * without notice.  Applications and drivers using these interfaces will fail
42  * to run on future releases.  These interfaces should not be used for any
43  * purpose except those expressly outlined in dtrace(7D) and libdtrace(3LIB).
44  * Please refer to the "Solaris Dynamic Tracing Guide" for more information.
45  */
46 
47 #ifndef _ASM
48 
49 #include <sys/types.h>
50 #include <sys/modctl.h>
51 #include <sys/processor.h>
52 #include <sys/systm.h>
53 #include <sys/ctf_api.h>
54 #include <sys/cyclic.h>
55 #include <sys/int_limits.h>
56 
57 /*
58  * DTrace Universal Constants and Typedefs
59  */
60 #define	DTRACE_CPUALL		-1	/* all CPUs */
61 #define	DTRACE_IDNONE		0	/* invalid probe identifier */
62 #define	DTRACE_EPIDNONE		0	/* invalid enabled probe identifier */
63 #define	DTRACE_AGGIDNONE	0	/* invalid aggregation identifier */
64 #define	DTRACE_AGGVARIDNONE	0	/* invalid aggregation variable ID */
65 #define	DTRACE_CACHEIDNONE	0	/* invalid predicate cache */
66 #define	DTRACE_PROVNONE		0	/* invalid provider identifier */
67 #define	DTRACE_METAPROVNONE	0	/* invalid meta-provider identifier */
68 #define	DTRACE_ARGNONE		-1	/* invalid argument index */
69 
70 #define	DTRACE_PROVNAMELEN	64
71 #define	DTRACE_MODNAMELEN	64
72 #define	DTRACE_FUNCNAMELEN	128
73 #define	DTRACE_NAMELEN		64
74 #define	DTRACE_FULLNAMELEN	(DTRACE_PROVNAMELEN + DTRACE_MODNAMELEN + \
75 				DTRACE_FUNCNAMELEN + DTRACE_NAMELEN + 4)
76 #define	DTRACE_ARGTYPELEN	128
77 
78 typedef uint32_t dtrace_id_t;		/* probe identifier */
79 typedef uint32_t dtrace_epid_t;		/* enabled probe identifier */
80 typedef uint32_t dtrace_aggid_t;	/* aggregation identifier */
81 typedef int64_t dtrace_aggvarid_t;	/* aggregation variable identifier */
82 typedef uint16_t dtrace_actkind_t;	/* action kind */
83 typedef int64_t dtrace_optval_t;	/* option value */
84 typedef uint32_t dtrace_cacheid_t;	/* predicate cache identifier */
85 
86 typedef enum dtrace_probespec {
87 	DTRACE_PROBESPEC_NONE = -1,
88 	DTRACE_PROBESPEC_PROVIDER = 0,
89 	DTRACE_PROBESPEC_MOD,
90 	DTRACE_PROBESPEC_FUNC,
91 	DTRACE_PROBESPEC_NAME
92 } dtrace_probespec_t;
93 
94 /*
95  * DTrace Intermediate Format (DIF)
96  *
97  * The following definitions describe the DTrace Intermediate Format (DIF), a
98  * a RISC-like instruction set and program encoding used to represent
99  * predicates and actions that can be bound to DTrace probes.  The constants
100  * below defining the number of available registers are suggested minimums; the
101  * compiler should use DTRACEIOC_CONF to dynamically obtain the number of
102  * registers provided by the current DTrace implementation.
103  */
104 #define	DIF_VERSION_1	1		/* DIF version 1: Solaris 10 Beta */
105 #define	DIF_VERSION_2	2		/* DIF version 2: Solaris 10 FCS */
106 #define	DIF_VERSION	DIF_VERSION_2	/* latest DIF instruction set version */
107 #define	DIF_DIR_NREGS	8		/* number of DIF integer registers */
108 #define	DIF_DTR_NREGS	8		/* number of DIF tuple registers */
109 
110 #define	DIF_OP_OR	1		/* or	r1, r2, rd */
111 #define	DIF_OP_XOR	2		/* xor	r1, r2, rd */
112 #define	DIF_OP_AND	3		/* and	r1, r2, rd */
113 #define	DIF_OP_SLL	4		/* sll	r1, r2, rd */
114 #define	DIF_OP_SRL	5		/* srl	r1, r2, rd */
115 #define	DIF_OP_SUB	6		/* sub	r1, r2, rd */
116 #define	DIF_OP_ADD	7		/* add	r1, r2, rd */
117 #define	DIF_OP_MUL	8		/* mul	r1, r2, rd */
118 #define	DIF_OP_SDIV	9		/* sdiv	r1, r2, rd */
119 #define	DIF_OP_UDIV	10		/* udiv r1, r2, rd */
120 #define	DIF_OP_SREM	11		/* srem r1, r2, rd */
121 #define	DIF_OP_UREM	12		/* urem r1, r2, rd */
122 #define	DIF_OP_NOT	13		/* not	r1, rd */
123 #define	DIF_OP_MOV	14		/* mov	r1, rd */
124 #define	DIF_OP_CMP	15		/* cmp	r1, r2 */
125 #define	DIF_OP_TST	16		/* tst  r1 */
126 #define	DIF_OP_BA	17		/* ba	label */
127 #define	DIF_OP_BE	18		/* be	label */
128 #define	DIF_OP_BNE	19		/* bne	label */
129 #define	DIF_OP_BG	20		/* bg	label */
130 #define	DIF_OP_BGU	21		/* bgu	label */
131 #define	DIF_OP_BGE	22		/* bge	label */
132 #define	DIF_OP_BGEU	23		/* bgeu	label */
133 #define	DIF_OP_BL	24		/* bl	label */
134 #define	DIF_OP_BLU	25		/* blu	label */
135 #define	DIF_OP_BLE	26		/* ble	label */
136 #define	DIF_OP_BLEU	27		/* bleu	label */
137 #define	DIF_OP_LDSB	28		/* ldsb	[r1], rd */
138 #define	DIF_OP_LDSH	29		/* ldsh	[r1], rd */
139 #define	DIF_OP_LDSW	30		/* ldsw [r1], rd */
140 #define	DIF_OP_LDUB	31		/* ldub	[r1], rd */
141 #define	DIF_OP_LDUH	32		/* lduh	[r1], rd */
142 #define	DIF_OP_LDUW	33		/* lduw	[r1], rd */
143 #define	DIF_OP_LDX	34		/* ldx	[r1], rd */
144 #define	DIF_OP_RET	35		/* ret	rd */
145 #define	DIF_OP_NOP	36		/* nop */
146 #define	DIF_OP_SETX	37		/* setx	intindex, rd */
147 #define	DIF_OP_SETS	38		/* sets strindex, rd */
148 #define	DIF_OP_SCMP	39		/* scmp	r1, r2 */
149 #define	DIF_OP_LDGA	40		/* ldga	var, ri, rd */
150 #define	DIF_OP_LDGS	41		/* ldgs var, rd */
151 #define	DIF_OP_STGS	42		/* stgs var, rs */
152 #define	DIF_OP_LDTA	43		/* ldta var, ri, rd */
153 #define	DIF_OP_LDTS	44		/* ldts var, rd */
154 #define	DIF_OP_STTS	45		/* stts var, rs */
155 #define	DIF_OP_SRA	46		/* sra	r1, r2, rd */
156 #define	DIF_OP_CALL	47		/* call	subr, rd */
157 #define	DIF_OP_PUSHTR	48		/* pushtr type, rs, rr */
158 #define	DIF_OP_PUSHTV	49		/* pushtv type, rs, rv */
159 #define	DIF_OP_POPTS	50		/* popts */
160 #define	DIF_OP_FLUSHTS	51		/* flushts */
161 #define	DIF_OP_LDGAA	52		/* ldgaa var, rd */
162 #define	DIF_OP_LDTAA	53		/* ldtaa var, rd */
163 #define	DIF_OP_STGAA	54		/* stgaa var, rs */
164 #define	DIF_OP_STTAA	55		/* sttaa var, rs */
165 #define	DIF_OP_LDLS	56		/* ldls	var, rd */
166 #define	DIF_OP_STLS	57		/* stls	var, rs */
167 #define	DIF_OP_ALLOCS	58		/* allocs r1, rd */
168 #define	DIF_OP_COPYS	59		/* copys  r1, r2, rd */
169 #define	DIF_OP_STB	60		/* stb	r1, [rd] */
170 #define	DIF_OP_STH	61		/* sth	r1, [rd] */
171 #define	DIF_OP_STW	62		/* stw	r1, [rd] */
172 #define	DIF_OP_STX	63		/* stx	r1, [rd] */
173 #define	DIF_OP_ULDSB	64		/* uldsb [r1], rd */
174 #define	DIF_OP_ULDSH	65		/* uldsh [r1], rd */
175 #define	DIF_OP_ULDSW	66		/* uldsw [r1], rd */
176 #define	DIF_OP_ULDUB	67		/* uldub [r1], rd */
177 #define	DIF_OP_ULDUH	68		/* ulduh [r1], rd */
178 #define	DIF_OP_ULDUW	69		/* ulduw [r1], rd */
179 #define	DIF_OP_ULDX	70		/* uldx  [r1], rd */
180 #define	DIF_OP_RLDSB	71		/* rldsb [r1], rd */
181 #define	DIF_OP_RLDSH	72		/* rldsh [r1], rd */
182 #define	DIF_OP_RLDSW	73		/* rldsw [r1], rd */
183 #define	DIF_OP_RLDUB	74		/* rldub [r1], rd */
184 #define	DIF_OP_RLDUH	75		/* rlduh [r1], rd */
185 #define	DIF_OP_RLDUW	76		/* rlduw [r1], rd */
186 #define	DIF_OP_RLDX	77		/* rldx  [r1], rd */
187 #define	DIF_OP_XLATE	78		/* xlate xlrindex, rd */
188 #define	DIF_OP_XLARG	79		/* xlarg xlrindex, rd */
189 
190 #define	DIF_INTOFF_MAX		0xffff	/* highest integer table offset */
191 #define	DIF_STROFF_MAX		0xffff	/* highest string table offset */
192 #define	DIF_REGISTER_MAX	0xff	/* highest register number */
193 #define	DIF_VARIABLE_MAX	0xffff	/* highest variable identifier */
194 #define	DIF_SUBROUTINE_MAX	0xffff	/* highest subroutine code */
195 
196 #define	DIF_VAR_ARRAY_MIN	0x0000	/* lowest numbered array variable */
197 #define	DIF_VAR_ARRAY_UBASE	0x0080	/* lowest user-defined array */
198 #define	DIF_VAR_ARRAY_MAX	0x00ff	/* highest numbered array variable */
199 
200 #define	DIF_VAR_OTHER_MIN	0x0100	/* lowest numbered scalar or assc */
201 #define	DIF_VAR_OTHER_UBASE	0x0500	/* lowest user-defined scalar or assc */
202 #define	DIF_VAR_OTHER_MAX	0xffff	/* highest numbered scalar or assc */
203 
204 #define	DIF_VAR_ARGS		0x0000	/* arguments array */
205 #define	DIF_VAR_REGS		0x0001	/* registers array */
206 #define	DIF_VAR_UREGS		0x0002	/* user registers array */
207 #define	DIF_VAR_CURTHREAD	0x0100	/* thread pointer */
208 #define	DIF_VAR_TIMESTAMP	0x0101	/* timestamp */
209 #define	DIF_VAR_VTIMESTAMP	0x0102	/* virtual timestamp */
210 #define	DIF_VAR_IPL		0x0103	/* interrupt priority level */
211 #define	DIF_VAR_EPID		0x0104	/* enabled probe ID */
212 #define	DIF_VAR_ID		0x0105	/* probe ID */
213 #define	DIF_VAR_ARG0		0x0106	/* first argument */
214 #define	DIF_VAR_ARG1		0x0107	/* second argument */
215 #define	DIF_VAR_ARG2		0x0108	/* third argument */
216 #define	DIF_VAR_ARG3		0x0109	/* fourth argument */
217 #define	DIF_VAR_ARG4		0x010a	/* fifth argument */
218 #define	DIF_VAR_ARG5		0x010b	/* sixth argument */
219 #define	DIF_VAR_ARG6		0x010c	/* seventh argument */
220 #define	DIF_VAR_ARG7		0x010d	/* eighth argument */
221 #define	DIF_VAR_ARG8		0x010e	/* ninth argument */
222 #define	DIF_VAR_ARG9		0x010f	/* tenth argument */
223 #define	DIF_VAR_STACKDEPTH	0x0110	/* stack depth */
224 #define	DIF_VAR_CALLER		0x0111	/* caller */
225 #define	DIF_VAR_PROBEPROV	0x0112	/* probe provider */
226 #define	DIF_VAR_PROBEMOD	0x0113	/* probe module */
227 #define	DIF_VAR_PROBEFUNC	0x0114	/* probe function */
228 #define	DIF_VAR_PROBENAME	0x0115	/* probe name */
229 #define	DIF_VAR_PID		0x0116	/* process ID */
230 #define	DIF_VAR_TID		0x0117	/* (per-process) thread ID */
231 #define	DIF_VAR_EXECNAME	0x0118	/* name of executable */
232 #define	DIF_VAR_ZONENAME	0x0119	/* zone name associated with process */
233 #define	DIF_VAR_WALLTIMESTAMP	0x011a	/* wall-clock timestamp */
234 #define	DIF_VAR_USTACKDEPTH	0x011b	/* user-land stack depth */
235 #define	DIF_VAR_UCALLER		0x011c	/* user-level caller */
236 
237 #define	DIF_SUBR_RAND			0
238 #define	DIF_SUBR_MUTEX_OWNED		1
239 #define	DIF_SUBR_MUTEX_OWNER		2
240 #define	DIF_SUBR_MUTEX_TYPE_ADAPTIVE	3
241 #define	DIF_SUBR_MUTEX_TYPE_SPIN	4
242 #define	DIF_SUBR_RW_READ_HELD		5
243 #define	DIF_SUBR_RW_WRITE_HELD		6
244 #define	DIF_SUBR_RW_ISWRITER		7
245 #define	DIF_SUBR_COPYIN			8
246 #define	DIF_SUBR_COPYINSTR		9
247 #define	DIF_SUBR_SPECULATION		10
248 #define	DIF_SUBR_PROGENYOF		11
249 #define	DIF_SUBR_STRLEN			12
250 #define	DIF_SUBR_COPYOUT		13
251 #define	DIF_SUBR_COPYOUTSTR		14
252 #define	DIF_SUBR_ALLOCA			15
253 #define	DIF_SUBR_BCOPY			16
254 #define	DIF_SUBR_COPYINTO		17
255 #define	DIF_SUBR_MSGDSIZE		18
256 #define	DIF_SUBR_MSGSIZE		19
257 #define	DIF_SUBR_GETMAJOR		20
258 #define	DIF_SUBR_GETMINOR		21
259 #define	DIF_SUBR_DDI_PATHNAME		22
260 #define	DIF_SUBR_STRJOIN		23
261 #define	DIF_SUBR_LLTOSTR		24
262 #define	DIF_SUBR_BASENAME		25
263 #define	DIF_SUBR_DIRNAME		26
264 #define	DIF_SUBR_CLEANPATH		27
265 #define	DIF_SUBR_STRCHR			28
266 #define	DIF_SUBR_STRRCHR		29
267 #define	DIF_SUBR_STRSTR			30
268 #define	DIF_SUBR_STRTOK			31
269 #define	DIF_SUBR_SUBSTR			32
270 #define	DIF_SUBR_INDEX			33
271 #define	DIF_SUBR_RINDEX			34
272 
273 #define	DIF_SUBR_MAX			34	/* max subroutine value */
274 
275 typedef uint32_t dif_instr_t;
276 
277 #define	DIF_INSTR_OP(i)			(((i) >> 24) & 0xff)
278 #define	DIF_INSTR_R1(i)			(((i) >> 16) & 0xff)
279 #define	DIF_INSTR_R2(i)			(((i) >>  8) & 0xff)
280 #define	DIF_INSTR_RD(i)			((i) & 0xff)
281 #define	DIF_INSTR_RS(i)			((i) & 0xff)
282 #define	DIF_INSTR_LABEL(i)		((i) & 0xffffff)
283 #define	DIF_INSTR_VAR(i)		(((i) >>  8) & 0xffff)
284 #define	DIF_INSTR_INTEGER(i)		(((i) >>  8) & 0xffff)
285 #define	DIF_INSTR_STRING(i)		(((i) >>  8) & 0xffff)
286 #define	DIF_INSTR_SUBR(i)		(((i) >>  8) & 0xffff)
287 #define	DIF_INSTR_TYPE(i)		(((i) >> 16) & 0xff)
288 #define	DIF_INSTR_XLREF(i)		(((i) >>  8) & 0xffff)
289 
290 #define	DIF_INSTR_FMT(op, r1, r2, d) \
291 	(((op) << 24) | ((r1) << 16) | ((r2) << 8) | (d))
292 
293 #define	DIF_INSTR_NOT(r1, d)		(DIF_INSTR_FMT(DIF_OP_NOT, r1, 0, d))
294 #define	DIF_INSTR_MOV(r1, d)		(DIF_INSTR_FMT(DIF_OP_MOV, r1, 0, d))
295 #define	DIF_INSTR_CMP(op, r1, r2)	(DIF_INSTR_FMT(op, r1, r2, 0))
296 #define	DIF_INSTR_TST(r1)		(DIF_INSTR_FMT(DIF_OP_TST, r1, 0, 0))
297 #define	DIF_INSTR_BRANCH(op, label)	(((op) << 24) | (label))
298 #define	DIF_INSTR_LOAD(op, r1, d)	(DIF_INSTR_FMT(op, r1, 0, d))
299 #define	DIF_INSTR_STORE(op, r1, d)	(DIF_INSTR_FMT(op, r1, 0, d))
300 #define	DIF_INSTR_SETX(i, d)		((DIF_OP_SETX << 24) | ((i) << 8) | (d))
301 #define	DIF_INSTR_SETS(s, d)		((DIF_OP_SETS << 24) | ((s) << 8) | (d))
302 #define	DIF_INSTR_RET(d)		(DIF_INSTR_FMT(DIF_OP_RET, 0, 0, d))
303 #define	DIF_INSTR_NOP			(DIF_OP_NOP << 24)
304 #define	DIF_INSTR_LDA(op, v, r, d)	(DIF_INSTR_FMT(op, v, r, d))
305 #define	DIF_INSTR_LDV(op, v, d)		(((op) << 24) | ((v) << 8) | (d))
306 #define	DIF_INSTR_STV(op, v, rs)	(((op) << 24) | ((v) << 8) | (rs))
307 #define	DIF_INSTR_CALL(s, d)		((DIF_OP_CALL << 24) | ((s) << 8) | (d))
308 #define	DIF_INSTR_PUSHTS(op, t, r2, rs)	(DIF_INSTR_FMT(op, t, r2, rs))
309 #define	DIF_INSTR_POPTS			(DIF_OP_POPTS << 24)
310 #define	DIF_INSTR_FLUSHTS		(DIF_OP_FLUSHTS << 24)
311 #define	DIF_INSTR_ALLOCS(r1, d)		(DIF_INSTR_FMT(DIF_OP_ALLOCS, r1, 0, d))
312 #define	DIF_INSTR_COPYS(r1, r2, d)	(DIF_INSTR_FMT(DIF_OP_COPYS, r1, r2, d))
313 #define	DIF_INSTR_XLATE(op, r, d)	(((op) << 24) | ((r) << 8) | (d))
314 
315 #define	DIF_REG_R0	0		/* %r0 is always set to zero */
316 
317 /*
318  * A DTrace Intermediate Format Type (DIF Type) is used to represent the types
319  * of variables, function and associative array arguments, and the return type
320  * for each DIF object (shown below).  It contains a description of the type,
321  * its size in bytes, and a module identifier.
322  */
323 typedef struct dtrace_diftype {
324 	uint8_t dtdt_kind;		/* type kind (see below) */
325 	uint8_t dtdt_ckind;		/* type kind in CTF */
326 	uint8_t dtdt_flags;		/* type flags (see below) */
327 	uint8_t dtdt_pad;		/* reserved for future use */
328 	uint32_t dtdt_size;		/* type size in bytes (unless string) */
329 } dtrace_diftype_t;
330 
331 #define	DIF_TYPE_CTF		0	/* type is a CTF type */
332 #define	DIF_TYPE_STRING		1	/* type is a D string */
333 
334 #define	DIF_TF_BYREF		0x1	/* type is passed by reference */
335 
336 /*
337  * A DTrace Intermediate Format variable record is used to describe each of the
338  * variables referenced by a given DIF object.  It contains an integer variable
339  * identifier along with variable scope and properties, as shown below.  The
340  * size of this structure must be sizeof (int) aligned.
341  */
342 typedef struct dtrace_difv {
343 	uint32_t dtdv_name;		/* variable name index in dtdo_strtab */
344 	uint32_t dtdv_id;		/* variable reference identifier */
345 	uint8_t dtdv_kind;		/* variable kind (see below) */
346 	uint8_t dtdv_scope;		/* variable scope (see below) */
347 	uint16_t dtdv_flags;		/* variable flags (see below) */
348 	dtrace_diftype_t dtdv_type;	/* variable type (see above) */
349 } dtrace_difv_t;
350 
351 #define	DIFV_KIND_ARRAY		0	/* variable is an array of quantities */
352 #define	DIFV_KIND_SCALAR	1	/* variable is a scalar quantity */
353 
354 #define	DIFV_SCOPE_GLOBAL	0	/* variable has global scope */
355 #define	DIFV_SCOPE_THREAD	1	/* variable has thread scope */
356 #define	DIFV_SCOPE_LOCAL	2	/* variable has local scope */
357 
358 #define	DIFV_F_REF		0x1	/* variable is referenced by DIFO */
359 #define	DIFV_F_MOD		0x2	/* variable is written by DIFO */
360 
361 /*
362  * DTrace Actions
363  *
364  * The upper byte determines the class of the action; the low bytes determines
365  * the specific action within that class.  The classes of actions are as
366  * follows:
367  *
368  *   [ no class ]                  <= May record process- or kernel-related data
369  *   DTRACEACT_PROC                <= Only records process-related data
370  *   DTRACEACT_PROC_DESTRUCTIVE    <= Potentially destructive to processes
371  *   DTRACEACT_KERNEL              <= Only records kernel-related data
372  *   DTRACEACT_KERNEL_DESTRUCTIVE  <= Potentially destructive to the kernel
373  *   DTRACEACT_SPECULATIVE         <= Speculation-related action
374  *   DTRACEACT_AGGREGATION         <= Aggregating action
375  */
376 #define	DTRACEACT_NONE			0	/* no action */
377 #define	DTRACEACT_DIFEXPR		1	/* action is DIF expression */
378 #define	DTRACEACT_EXIT			2	/* exit() action */
379 #define	DTRACEACT_PRINTF		3	/* printf() action */
380 #define	DTRACEACT_PRINTA		4	/* printa() action */
381 #define	DTRACEACT_LIBACT		5	/* library-controlled action */
382 
383 #define	DTRACEACT_PROC			0x0100
384 #define	DTRACEACT_USTACK		(DTRACEACT_PROC + 1)
385 #define	DTRACEACT_JSTACK		(DTRACEACT_PROC + 2)
386 #define	DTRACEACT_USYM			(DTRACEACT_PROC + 3)
387 #define	DTRACEACT_UMOD			(DTRACEACT_PROC + 4)
388 #define	DTRACEACT_UADDR			(DTRACEACT_PROC + 5)
389 
390 #define	DTRACEACT_PROC_DESTRUCTIVE	0x0200
391 #define	DTRACEACT_STOP			(DTRACEACT_PROC_DESTRUCTIVE + 1)
392 #define	DTRACEACT_RAISE			(DTRACEACT_PROC_DESTRUCTIVE + 2)
393 #define	DTRACEACT_SYSTEM		(DTRACEACT_PROC_DESTRUCTIVE + 3)
394 #define	DTRACEACT_FREOPEN		(DTRACEACT_PROC_DESTRUCTIVE + 4)
395 
396 #define	DTRACEACT_PROC_CONTROL		0x0300
397 
398 #define	DTRACEACT_KERNEL		0x0400
399 #define	DTRACEACT_STACK			(DTRACEACT_KERNEL + 1)
400 #define	DTRACEACT_SYM			(DTRACEACT_KERNEL + 2)
401 #define	DTRACEACT_MOD			(DTRACEACT_KERNEL + 3)
402 
403 #define	DTRACEACT_KERNEL_DESTRUCTIVE	0x0500
404 #define	DTRACEACT_BREAKPOINT		(DTRACEACT_KERNEL_DESTRUCTIVE + 1)
405 #define	DTRACEACT_PANIC			(DTRACEACT_KERNEL_DESTRUCTIVE + 2)
406 #define	DTRACEACT_CHILL			(DTRACEACT_KERNEL_DESTRUCTIVE + 3)
407 
408 #define	DTRACEACT_SPECULATIVE		0x0600
409 #define	DTRACEACT_SPECULATE		(DTRACEACT_SPECULATIVE + 1)
410 #define	DTRACEACT_COMMIT		(DTRACEACT_SPECULATIVE + 2)
411 #define	DTRACEACT_DISCARD		(DTRACEACT_SPECULATIVE + 3)
412 
413 #define	DTRACEACT_CLASS(x)		((x) & 0xff00)
414 
415 #define	DTRACEACT_ISDESTRUCTIVE(x)	\
416 	(DTRACEACT_CLASS(x) == DTRACEACT_PROC_DESTRUCTIVE || \
417 	DTRACEACT_CLASS(x) == DTRACEACT_KERNEL_DESTRUCTIVE)
418 
419 #define	DTRACEACT_ISSPECULATIVE(x)	\
420 	(DTRACEACT_CLASS(x) == DTRACEACT_SPECULATIVE)
421 
422 #define	DTRACEACT_ISPRINTFLIKE(x)	\
423 	((x) == DTRACEACT_PRINTF || (x) == DTRACEACT_PRINTA || \
424 	(x) == DTRACEACT_SYSTEM || (x) == DTRACEACT_FREOPEN)
425 
426 /*
427  * DTrace Aggregating Actions
428  *
429  * These are functions f(x) for which the following is true:
430  *
431  *    f(f(x_0) U f(x_1) U ... U f(x_n)) = f(x_0 U x_1 U ... U x_n)
432  *
433  * where x_n is a set of arbitrary data.  Aggregating actions are in their own
434  * DTrace action class, DTTRACEACT_AGGREGATION.  The macros provided here allow
435  * for easier processing of the aggregation argument and data payload for a few
436  * aggregating actions (notably:  quantize(), lquantize(), and ustack()).
437  */
438 #define	DTRACEACT_AGGREGATION		0x0700
439 #define	DTRACEAGG_COUNT			(DTRACEACT_AGGREGATION + 1)
440 #define	DTRACEAGG_MIN			(DTRACEACT_AGGREGATION + 2)
441 #define	DTRACEAGG_MAX			(DTRACEACT_AGGREGATION + 3)
442 #define	DTRACEAGG_AVG			(DTRACEACT_AGGREGATION + 4)
443 #define	DTRACEAGG_SUM			(DTRACEACT_AGGREGATION + 5)
444 #define	DTRACEAGG_STDDEV		(DTRACEACT_AGGREGATION + 6)
445 #define	DTRACEAGG_QUANTIZE		(DTRACEACT_AGGREGATION + 7)
446 #define	DTRACEAGG_LQUANTIZE		(DTRACEACT_AGGREGATION + 8)
447 
448 #define	DTRACEACT_ISAGG(x)		\
449 	(DTRACEACT_CLASS(x) == DTRACEACT_AGGREGATION)
450 
451 #define	DTRACE_QUANTIZE_NBUCKETS	\
452 	(((sizeof (uint64_t) * NBBY) - 1) * 2 + 1)
453 
454 #define	DTRACE_QUANTIZE_ZEROBUCKET	((sizeof (uint64_t) * NBBY) - 1)
455 
456 #define	DTRACE_QUANTIZE_BUCKETVAL(buck)					\
457 	(int64_t)((buck) < DTRACE_QUANTIZE_ZEROBUCKET ?			\
458 	-(1LL << (DTRACE_QUANTIZE_ZEROBUCKET - 1 - (buck))) :		\
459 	(buck) == DTRACE_QUANTIZE_ZEROBUCKET ? 0 :			\
460 	1LL << ((buck) - DTRACE_QUANTIZE_ZEROBUCKET - 1))
461 
462 #define	DTRACE_LQUANTIZE_STEPSHIFT		48
463 #define	DTRACE_LQUANTIZE_STEPMASK		((uint64_t)UINT16_MAX << 48)
464 #define	DTRACE_LQUANTIZE_LEVELSHIFT		32
465 #define	DTRACE_LQUANTIZE_LEVELMASK		((uint64_t)UINT16_MAX << 32)
466 #define	DTRACE_LQUANTIZE_BASESHIFT		0
467 #define	DTRACE_LQUANTIZE_BASEMASK		UINT32_MAX
468 
469 #define	DTRACE_LQUANTIZE_STEP(x)		\
470 	(uint16_t)(((x) & DTRACE_LQUANTIZE_STEPMASK) >> \
471 	DTRACE_LQUANTIZE_STEPSHIFT)
472 
473 #define	DTRACE_LQUANTIZE_LEVELS(x)		\
474 	(uint16_t)(((x) & DTRACE_LQUANTIZE_LEVELMASK) >> \
475 	DTRACE_LQUANTIZE_LEVELSHIFT)
476 
477 #define	DTRACE_LQUANTIZE_BASE(x)		\
478 	(int32_t)(((x) & DTRACE_LQUANTIZE_BASEMASK) >> \
479 	DTRACE_LQUANTIZE_BASESHIFT)
480 
481 #define	DTRACE_USTACK_NFRAMES(x)	(uint32_t)((x) & UINT32_MAX)
482 #define	DTRACE_USTACK_STRSIZE(x)	(uint32_t)((x) >> 32)
483 #define	DTRACE_USTACK_ARG(x, y)		\
484 	((((uint64_t)(y)) << 32) | ((x) & UINT32_MAX))
485 
486 #ifndef _LP64
487 #ifndef _LITTLE_ENDIAN
488 #define	DTRACE_PTR(type, name)	uint32_t name##pad; type *name
489 #else
490 #define	DTRACE_PTR(type, name)	type *name; uint32_t name##pad
491 #endif
492 #else
493 #define	DTRACE_PTR(type, name)	type *name
494 #endif
495 
496 /*
497  * DTrace Object Format (DOF)
498  *
499  * DTrace programs can be persistently encoded in the DOF format so that they
500  * may be embedded in other programs (for example, in an ELF file) or in the
501  * dtrace driver configuration file for use in anonymous tracing.  The DOF
502  * format is versioned and extensible so that it can be revised and so that
503  * internal data structures can be modified or extended compatibly.  All DOF
504  * structures use fixed-size types, so the 32-bit and 64-bit representations
505  * are identical and consumers can use either data model transparently.
506  *
507  * The file layout is structured as follows:
508  *
509  * +---------------+-------------------+----- ... ----+---- ... ------+
510  * |   dof_hdr_t   |  dof_sec_t[ ... ] |   loadable   | non-loadable  |
511  * | (file header) | (section headers) | section data | section data  |
512  * +---------------+-------------------+----- ... ----+---- ... ------+
513  * |<------------ dof_hdr.dofh_loadsz --------------->|               |
514  * |<------------ dof_hdr.dofh_filesz ------------------------------->|
515  *
516  * The file header stores meta-data including a magic number, data model for
517  * the instrumentation, data encoding, and properties of the DIF code within.
518  * The header describes its own size and the size of the section headers.  By
519  * convention, an array of section headers follows the file header, and then
520  * the data for all loadable sections and unloadable sections.  This permits
521  * consumer code to easily download the headers and all loadable data into the
522  * DTrace driver in one contiguous chunk, omitting other extraneous sections.
523  *
524  * The section headers describe the size, offset, alignment, and section type
525  * for each section.  Sections are described using a set of #defines that tell
526  * the consumer what kind of data is expected.  Sections can contain links to
527  * other sections by storing a dof_secidx_t, an index into the section header
528  * array, inside of the section data structures.  The section header includes
529  * an entry size so that sections with data arrays can grow their structures.
530  *
531  * The DOF data itself can contain many snippets of DIF (i.e. >1 DIFOs), which
532  * are represented themselves as a collection of related DOF sections.  This
533  * permits us to change the set of sections associated with a DIFO over time,
534  * and also permits us to encode DIFOs that contain different sets of sections.
535  * When a DOF section wants to refer to a DIFO, it stores the dof_secidx_t of a
536  * section of type DOF_SECT_DIFOHDR.  This section's data is then an array of
537  * dof_secidx_t's which in turn denote the sections associated with this DIFO.
538  *
539  * This loose coupling of the file structure (header and sections) to the
540  * structure of the DTrace program itself (ECB descriptions, action
541  * descriptions, and DIFOs) permits activities such as relocation processing
542  * to occur in a single pass without having to understand D program structure.
543  *
544  * Finally, strings are always stored in ELF-style string tables along with a
545  * string table section index and string table offset.  Therefore strings in
546  * DOF are always arbitrary-length and not bound to the current implementation.
547  */
548 
549 #define	DOF_ID_SIZE	16	/* total size of dofh_ident[] in bytes */
550 
551 typedef struct dof_hdr {
552 	uint8_t dofh_ident[DOF_ID_SIZE]; /* identification bytes (see below) */
553 	uint32_t dofh_flags;		/* file attribute flags (if any) */
554 	uint32_t dofh_hdrsize;		/* size of file header in bytes */
555 	uint32_t dofh_secsize;		/* size of section header in bytes */
556 	uint32_t dofh_secnum;		/* number of section headers */
557 	uint64_t dofh_secoff;		/* file offset of section headers */
558 	uint64_t dofh_loadsz;		/* file size of loadable portion */
559 	uint64_t dofh_filesz;		/* file size of entire DOF file */
560 	uint64_t dofh_pad;		/* reserved for future use */
561 } dof_hdr_t;
562 
563 #define	DOF_ID_MAG0	0	/* first byte of magic number */
564 #define	DOF_ID_MAG1	1	/* second byte of magic number */
565 #define	DOF_ID_MAG2	2	/* third byte of magic number */
566 #define	DOF_ID_MAG3	3	/* fourth byte of magic number */
567 #define	DOF_ID_MODEL	4	/* DOF data model (see below) */
568 #define	DOF_ID_ENCODING	5	/* DOF data encoding (see below) */
569 #define	DOF_ID_VERSION	6	/* DOF file format major version (see below) */
570 #define	DOF_ID_DIFVERS	7	/* DIF instruction set version */
571 #define	DOF_ID_DIFIREG	8	/* DIF integer registers used by compiler */
572 #define	DOF_ID_DIFTREG	9	/* DIF tuple registers used by compiler */
573 #define	DOF_ID_PAD	10	/* start of padding bytes (all zeroes) */
574 
575 #define	DOF_MAG_MAG0	0x7F	/* DOF_ID_MAG[0-3] */
576 #define	DOF_MAG_MAG1	'D'
577 #define	DOF_MAG_MAG2	'O'
578 #define	DOF_MAG_MAG3	'F'
579 
580 #define	DOF_MAG_STRING	"\177DOF"
581 #define	DOF_MAG_STRLEN	4
582 
583 #define	DOF_MODEL_NONE	0	/* DOF_ID_MODEL */
584 #define	DOF_MODEL_ILP32	1
585 #define	DOF_MODEL_LP64	2
586 
587 #ifdef _LP64
588 #define	DOF_MODEL_NATIVE	DOF_MODEL_LP64
589 #else
590 #define	DOF_MODEL_NATIVE	DOF_MODEL_ILP32
591 #endif
592 
593 #define	DOF_ENCODE_NONE	0	/* DOF_ID_ENCODING */
594 #define	DOF_ENCODE_LSB	1
595 #define	DOF_ENCODE_MSB	2
596 
597 #ifdef _BIG_ENDIAN
598 #define	DOF_ENCODE_NATIVE	DOF_ENCODE_MSB
599 #else
600 #define	DOF_ENCODE_NATIVE	DOF_ENCODE_LSB
601 #endif
602 
603 #define	DOF_VERSION_1	1	/* DOF version 1: Solaris 10 FCS */
604 #define	DOF_VERSION_2	2	/* DOF version 2: Solaris Express 6/06 */
605 #define	DOF_VERSION	DOF_VERSION_2	/* Latest DOF version */
606 
607 #define	DOF_FL_VALID	0	/* mask of all valid dofh_flags bits */
608 
609 typedef uint32_t dof_secidx_t;	/* section header table index type */
610 typedef uint32_t dof_stridx_t;	/* string table index type */
611 
612 #define	DOF_SECIDX_NONE	(-1U)	/* null value for section indices */
613 #define	DOF_STRIDX_NONE	(-1U)	/* null value for string indices */
614 
615 typedef struct dof_sec {
616 	uint32_t dofs_type;	/* section type (see below) */
617 	uint32_t dofs_align;	/* section data memory alignment */
618 	uint32_t dofs_flags;	/* section flags (if any) */
619 	uint32_t dofs_entsize;	/* size of section entry (if table) */
620 	uint64_t dofs_offset;	/* offset of section data within file */
621 	uint64_t dofs_size;	/* size of section data in bytes */
622 } dof_sec_t;
623 
624 #define	DOF_SECT_NONE		0	/* null section */
625 #define	DOF_SECT_COMMENTS	1	/* compiler comments */
626 #define	DOF_SECT_SOURCE		2	/* D program source code */
627 #define	DOF_SECT_ECBDESC	3	/* dof_ecbdesc_t */
628 #define	DOF_SECT_PROBEDESC	4	/* dof_probedesc_t */
629 #define	DOF_SECT_ACTDESC	5	/* dof_actdesc_t array */
630 #define	DOF_SECT_DIFOHDR	6	/* dof_difohdr_t (variable length) */
631 #define	DOF_SECT_DIF		7	/* uint32_t array of byte code */
632 #define	DOF_SECT_STRTAB		8	/* string table */
633 #define	DOF_SECT_VARTAB		9	/* dtrace_difv_t array */
634 #define	DOF_SECT_RELTAB		10	/* dof_relodesc_t array */
635 #define	DOF_SECT_TYPTAB		11	/* dtrace_diftype_t array */
636 #define	DOF_SECT_URELHDR	12	/* dof_relohdr_t (user relocations) */
637 #define	DOF_SECT_KRELHDR	13	/* dof_relohdr_t (kernel relocations) */
638 #define	DOF_SECT_OPTDESC	14	/* dof_optdesc_t array */
639 #define	DOF_SECT_PROVIDER	15	/* dof_provider_t */
640 #define	DOF_SECT_PROBES		16	/* dof_probe_t array */
641 #define	DOF_SECT_PRARGS		17	/* uint8_t array (probe arg mappings) */
642 #define	DOF_SECT_PROFFS		18	/* uint32_t array (probe arg offsets) */
643 #define	DOF_SECT_INTTAB		19	/* uint64_t array */
644 #define	DOF_SECT_UTSNAME	20	/* struct utsname */
645 #define	DOF_SECT_XLTAB		21	/* dof_xlref_t array */
646 #define	DOF_SECT_XLMEMBERS	22	/* dof_xlmember_t array */
647 #define	DOF_SECT_XLIMPORT	23	/* dof_xlator_t */
648 #define	DOF_SECT_XLEXPORT	24	/* dof_xlator_t */
649 #define	DOF_SECT_PREXPORT	25	/* dof_secidx_t array (exported objs) */
650 #define	DOF_SECT_PRENOFFS	26	/* uint32_t array (enabled offsets) */
651 
652 #define	DOF_SECF_LOAD		1	/* section should be loaded */
653 
654 typedef struct dof_ecbdesc {
655 	dof_secidx_t dofe_probes;	/* link to DOF_SECT_PROBEDESC */
656 	dof_secidx_t dofe_pred;		/* link to DOF_SECT_DIFOHDR */
657 	dof_secidx_t dofe_actions;	/* link to DOF_SECT_ACTDESC */
658 	uint32_t dofe_pad;		/* reserved for future use */
659 	uint64_t dofe_uarg;		/* user-supplied library argument */
660 } dof_ecbdesc_t;
661 
662 typedef struct dof_probedesc {
663 	dof_secidx_t dofp_strtab;	/* link to DOF_SECT_STRTAB section */
664 	dof_stridx_t dofp_provider;	/* provider string */
665 	dof_stridx_t dofp_mod;		/* module string */
666 	dof_stridx_t dofp_func;		/* function string */
667 	dof_stridx_t dofp_name;		/* name string */
668 	uint32_t dofp_id;		/* probe identifier (or zero) */
669 } dof_probedesc_t;
670 
671 typedef struct dof_actdesc {
672 	dof_secidx_t dofa_difo;		/* link to DOF_SECT_DIFOHDR */
673 	dof_secidx_t dofa_strtab;	/* link to DOF_SECT_STRTAB section */
674 	uint32_t dofa_kind;		/* action kind (DTRACEACT_* constant) */
675 	uint32_t dofa_ntuple;		/* number of subsequent tuple actions */
676 	uint64_t dofa_arg;		/* kind-specific argument */
677 	uint64_t dofa_uarg;		/* user-supplied argument */
678 } dof_actdesc_t;
679 
680 typedef struct dof_difohdr {
681 	dtrace_diftype_t dofd_rtype;	/* return type for this fragment */
682 	dof_secidx_t dofd_links[1];	/* variable length array of indices */
683 } dof_difohdr_t;
684 
685 typedef struct dof_relohdr {
686 	dof_secidx_t dofr_strtab;	/* link to DOF_SECT_STRTAB for names */
687 	dof_secidx_t dofr_relsec;	/* link to DOF_SECT_RELTAB for relos */
688 	dof_secidx_t dofr_tgtsec;	/* link to section we are relocating */
689 } dof_relohdr_t;
690 
691 typedef struct dof_relodesc {
692 	dof_stridx_t dofr_name;		/* string name of relocation symbol */
693 	uint32_t dofr_type;		/* relo type (DOF_RELO_* constant) */
694 	uint64_t dofr_offset;		/* byte offset for relocation */
695 	uint64_t dofr_data;		/* additional type-specific data */
696 } dof_relodesc_t;
697 
698 #define	DOF_RELO_NONE	0		/* empty relocation entry */
699 #define	DOF_RELO_SETX	1		/* relocate setx value */
700 
701 typedef struct dof_optdesc {
702 	uint32_t dofo_option;		/* option identifier */
703 	dof_secidx_t dofo_strtab;	/* string table, if string option */
704 	uint64_t dofo_value;		/* option value or string index */
705 } dof_optdesc_t;
706 
707 typedef uint32_t dof_attr_t;		/* encoded stability attributes */
708 
709 #define	DOF_ATTR(n, d, c)	(((n) << 24) | ((d) << 16) | ((c) << 8))
710 #define	DOF_ATTR_NAME(a)	(((a) >> 24) & 0xff)
711 #define	DOF_ATTR_DATA(a)	(((a) >> 16) & 0xff)
712 #define	DOF_ATTR_CLASS(a)	(((a) >>  8) & 0xff)
713 
714 typedef struct dof_provider {
715 	dof_secidx_t dofpv_strtab;	/* link to DOF_SECT_STRTAB section */
716 	dof_secidx_t dofpv_probes;	/* link to DOF_SECT_PROBES section */
717 	dof_secidx_t dofpv_prargs;	/* link to DOF_SECT_PRARGS section */
718 	dof_secidx_t dofpv_proffs;	/* link to DOF_SECT_PROFFS section */
719 	dof_stridx_t dofpv_name;	/* provider name string */
720 	dof_attr_t dofpv_provattr;	/* provider attributes */
721 	dof_attr_t dofpv_modattr;	/* module attributes */
722 	dof_attr_t dofpv_funcattr;	/* function attributes */
723 	dof_attr_t dofpv_nameattr;	/* name attributes */
724 	dof_attr_t dofpv_argsattr;	/* args attributes */
725 	dof_secidx_t dofpv_prenoffs;	/* link to DOF_SECT_PRENOFFS section */
726 } dof_provider_t;
727 
728 typedef struct dof_probe {
729 	uint64_t dofpr_addr;		/* probe base address or offset */
730 	dof_stridx_t dofpr_func;	/* probe function string */
731 	dof_stridx_t dofpr_name;	/* probe name string */
732 	dof_stridx_t dofpr_nargv;	/* native argument type strings */
733 	dof_stridx_t dofpr_xargv;	/* translated argument type strings */
734 	uint32_t dofpr_argidx;		/* index of first argument mapping */
735 	uint32_t dofpr_offidx;		/* index of first offset entry */
736 	uint8_t dofpr_nargc;		/* native argument count */
737 	uint8_t dofpr_xargc;		/* translated argument count */
738 	uint16_t dofpr_noffs;		/* number of offset entries for probe */
739 	uint32_t dofpr_enoffidx;	/* index of first is-enabled offset */
740 	uint16_t dofpr_nenoffs;		/* number of is-enabled offsets */
741 	uint16_t dofpr_pad1;		/* reserved for future use */
742 	uint32_t dofpr_pad2;		/* reserved for future use */
743 } dof_probe_t;
744 
745 typedef struct dof_xlator {
746 	dof_secidx_t dofxl_members;	/* link to DOF_SECT_XLMEMBERS section */
747 	dof_secidx_t dofxl_strtab;	/* link to DOF_SECT_STRTAB section */
748 	dof_stridx_t dofxl_argv;	/* input parameter type strings */
749 	uint32_t dofxl_argc;		/* input parameter list length */
750 	dof_stridx_t dofxl_type;	/* output type string name */
751 	dof_attr_t dofxl_attr;		/* output stability attributes */
752 } dof_xlator_t;
753 
754 typedef struct dof_xlmember {
755 	dof_secidx_t dofxm_difo;	/* member link to DOF_SECT_DIFOHDR */
756 	dof_stridx_t dofxm_name;	/* member name */
757 	dtrace_diftype_t dofxm_type;	/* member type */
758 } dof_xlmember_t;
759 
760 typedef struct dof_xlref {
761 	dof_secidx_t dofxr_xlator;	/* link to DOF_SECT_XLATORS section */
762 	uint32_t dofxr_member;		/* index of referenced dof_xlmember */
763 	uint32_t dofxr_argn;		/* index of argument for DIF_OP_XLARG */
764 } dof_xlref_t;
765 
766 /*
767  * DTrace Intermediate Format Object (DIFO)
768  *
769  * A DIFO is used to store the compiled DIF for a D expression, its return
770  * type, and its string and variable tables.  The string table is a single
771  * buffer of character data into which sets instructions and variable
772  * references can reference strings using a byte offset.  The variable table
773  * is an array of dtrace_difv_t structures that describe the name and type of
774  * each variable and the id used in the DIF code.  This structure is described
775  * above in the DIF section of this header file.  The DIFO is used at both
776  * user-level (in the library) and in the kernel, but the structure is never
777  * passed between the two: the DOF structures form the only interface.  As a
778  * result, the definition can change depending on the presence of _KERNEL.
779  */
780 typedef struct dtrace_difo {
781 	dif_instr_t *dtdo_buf;		/* instruction buffer */
782 	uint64_t *dtdo_inttab;		/* integer table (optional) */
783 	char *dtdo_strtab;		/* string table (optional) */
784 	dtrace_difv_t *dtdo_vartab;	/* variable table (optional) */
785 	uint_t dtdo_len;		/* length of instruction buffer */
786 	uint_t dtdo_intlen;		/* length of integer table */
787 	uint_t dtdo_strlen;		/* length of string table */
788 	uint_t dtdo_varlen;		/* length of variable table */
789 	dtrace_diftype_t dtdo_rtype;	/* return type */
790 	uint_t dtdo_refcnt;		/* owner reference count */
791 	uint_t dtdo_destructive;	/* invokes destructive subroutines */
792 #ifndef _KERNEL
793 	dof_relodesc_t *dtdo_kreltab;	/* kernel relocations */
794 	dof_relodesc_t *dtdo_ureltab;	/* user relocations */
795 	struct dt_node **dtdo_xlmtab;	/* translator references */
796 	uint_t dtdo_krelen;		/* length of krelo table */
797 	uint_t dtdo_urelen;		/* length of urelo table */
798 	uint_t dtdo_xlmlen;		/* length of translator table */
799 #endif
800 } dtrace_difo_t;
801 
802 /*
803  * DTrace Enabling Description Structures
804  *
805  * When DTrace is tracking the description of a DTrace enabling entity (probe,
806  * predicate, action, ECB, record, etc.), it does so in a description
807  * structure.  These structures all end in "desc", and are used at both
808  * user-level and in the kernel -- but (with the exception of
809  * dtrace_probedesc_t) they are never passed between them.  Typically,
810  * user-level will use the description structures when assembling an enabling.
811  * It will then distill those description structures into a DOF object (see
812  * above), and send it into the kernel.  The kernel will again use the
813  * description structures to create a description of the enabling as it reads
814  * the DOF.  When the description is complete, the enabling will be actually
815  * created -- turning it into the structures that represent the enabling
816  * instead of merely describing it.  Not surprisingly, the description
817  * structures bear a strong resemblance to the DOF structures that act as their
818  * conduit.
819  */
820 struct dtrace_predicate;
821 
822 typedef struct dtrace_probedesc {
823 	dtrace_id_t dtpd_id;			/* probe identifier */
824 	char dtpd_provider[DTRACE_PROVNAMELEN]; /* probe provider name */
825 	char dtpd_mod[DTRACE_MODNAMELEN];	/* probe module name */
826 	char dtpd_func[DTRACE_FUNCNAMELEN];	/* probe function name */
827 	char dtpd_name[DTRACE_NAMELEN];		/* probe name */
828 } dtrace_probedesc_t;
829 
830 typedef struct dtrace_repldesc {
831 	dtrace_probedesc_t dtrpd_match;		/* probe descr. to match */
832 	dtrace_probedesc_t dtrpd_create;	/* probe descr. to create */
833 } dtrace_repldesc_t;
834 
835 typedef struct dtrace_preddesc {
836 	dtrace_difo_t *dtpdd_difo;		/* pointer to DIF object */
837 	struct dtrace_predicate *dtpdd_predicate; /* pointer to predicate */
838 } dtrace_preddesc_t;
839 
840 typedef struct dtrace_actdesc {
841 	dtrace_difo_t *dtad_difo;		/* pointer to DIF object */
842 	struct dtrace_actdesc *dtad_next;	/* next action */
843 	dtrace_actkind_t dtad_kind;		/* kind of action */
844 	uint32_t dtad_ntuple;			/* number in tuple */
845 	uint64_t dtad_arg;			/* action argument */
846 	uint64_t dtad_uarg;			/* user argument */
847 	int dtad_refcnt;			/* reference count */
848 } dtrace_actdesc_t;
849 
850 typedef struct dtrace_ecbdesc {
851 	dtrace_actdesc_t *dted_action;		/* action description(s) */
852 	dtrace_preddesc_t dted_pred;		/* predicate description */
853 	dtrace_probedesc_t dted_probe;		/* probe description */
854 	uint64_t dted_uarg;			/* library argument */
855 	int dted_refcnt;			/* reference count */
856 } dtrace_ecbdesc_t;
857 
858 /*
859  * DTrace Metadata Description Structures
860  *
861  * DTrace separates the trace data stream from the metadata stream.  The only
862  * metadata tokens placed in the data stream are enabled probe identifiers
863  * (EPIDs) or (in the case of aggregations) aggregation identifiers.  In order
864  * to determine the structure of the data, DTrace consumers pass the token to
865  * the kernel, and receive in return a corresponding description of the enabled
866  * probe (via the dtrace_eprobedesc structure) or the aggregation (via the
867  * dtrace_aggdesc structure).  Both of these structures are expressed in terms
868  * of record descriptions (via the dtrace_recdesc structure) that describe the
869  * exact structure of the data.  Some record descriptions may also contain a
870  * format identifier; this additional bit of metadata can be retrieved from the
871  * kernel, for which a format description is returned via the dtrace_fmtdesc
872  * structure.  Note that all four of these structures must be bitness-neutral
873  * to allow for a 32-bit DTrace consumer on a 64-bit kernel.
874  */
875 typedef struct dtrace_recdesc {
876 	dtrace_actkind_t dtrd_action;		/* kind of action */
877 	uint32_t dtrd_size;			/* size of record */
878 	uint32_t dtrd_offset;			/* offset in ECB's data */
879 	uint16_t dtrd_alignment;		/* required alignment */
880 	uint16_t dtrd_format;			/* format, if any */
881 	uint64_t dtrd_arg;			/* action argument */
882 	uint64_t dtrd_uarg;			/* user argument */
883 } dtrace_recdesc_t;
884 
885 typedef struct dtrace_eprobedesc {
886 	dtrace_epid_t dtepd_epid;		/* enabled probe ID */
887 	dtrace_id_t dtepd_probeid;		/* probe ID */
888 	uint64_t dtepd_uarg;			/* library argument */
889 	uint32_t dtepd_size;			/* total size */
890 	int dtepd_nrecs;			/* number of records */
891 	dtrace_recdesc_t dtepd_rec[1];		/* records themselves */
892 } dtrace_eprobedesc_t;
893 
894 typedef struct dtrace_aggdesc {
895 	DTRACE_PTR(char, dtagd_name);		/* not filled in by kernel */
896 	dtrace_aggvarid_t dtagd_varid;		/* not filled in by kernel */
897 	int dtagd_flags;			/* not filled in by kernel */
898 	dtrace_aggid_t dtagd_id;		/* aggregation ID */
899 	dtrace_epid_t dtagd_epid;		/* enabled probe ID */
900 	uint32_t dtagd_size;			/* size in bytes */
901 	int dtagd_nrecs;			/* number of records */
902 	uint32_t dtagd_pad;			/* explicit padding */
903 	dtrace_recdesc_t dtagd_rec[1];		/* record descriptions */
904 } dtrace_aggdesc_t;
905 
906 typedef struct dtrace_fmtdesc {
907 	DTRACE_PTR(char, dtfd_string);		/* format string */
908 	int dtfd_length;			/* length of format string */
909 	uint16_t dtfd_format;			/* format identifier */
910 } dtrace_fmtdesc_t;
911 
912 #define	DTRACE_SIZEOF_EPROBEDESC(desc)				\
913 	(sizeof (dtrace_eprobedesc_t) + ((desc)->dtepd_nrecs ?	\
914 	(((desc)->dtepd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0))
915 
916 #define	DTRACE_SIZEOF_AGGDESC(desc)				\
917 	(sizeof (dtrace_aggdesc_t) + ((desc)->dtagd_nrecs ?	\
918 	(((desc)->dtagd_nrecs - 1) * sizeof (dtrace_recdesc_t)) : 0))
919 
920 /*
921  * DTrace Option Interface
922  *
923  * Run-time DTrace options are set and retrieved via DOF_SECT_OPTDESC sections
924  * in a DOF image.  The dof_optdesc structure contains an option identifier and
925  * an option value.  The valid option identifiers are found below; the mapping
926  * between option identifiers and option identifying strings is maintained at
927  * user-level.  Note that the value of DTRACEOPT_UNSET is such that all of the
928  * following are potentially valid option values:  all positive integers, zero
929  * and negative one.  Some options (notably "bufpolicy" and "bufresize") take
930  * predefined tokens as their values; these are defined with
931  * DTRACEOPT_{option}_{token}.
932  */
933 #define	DTRACEOPT_BUFSIZE	0	/* buffer size */
934 #define	DTRACEOPT_BUFPOLICY	1	/* buffer policy */
935 #define	DTRACEOPT_DYNVARSIZE	2	/* dynamic variable size */
936 #define	DTRACEOPT_AGGSIZE	3	/* aggregation size */
937 #define	DTRACEOPT_SPECSIZE	4	/* speculation size */
938 #define	DTRACEOPT_NSPEC		5	/* number of speculations */
939 #define	DTRACEOPT_STRSIZE	6	/* string size */
940 #define	DTRACEOPT_CLEANRATE	7	/* dynvar cleaning rate */
941 #define	DTRACEOPT_CPU		8	/* CPU to trace */
942 #define	DTRACEOPT_BUFRESIZE	9	/* buffer resizing policy */
943 #define	DTRACEOPT_GRABANON	10	/* grab anonymous state, if any */
944 #define	DTRACEOPT_FLOWINDENT	11	/* indent function entry/return */
945 #define	DTRACEOPT_QUIET		12	/* only output explicitly traced data */
946 #define	DTRACEOPT_STACKFRAMES	13	/* number of stack frames */
947 #define	DTRACEOPT_USTACKFRAMES	14	/* number of user stack frames */
948 #define	DTRACEOPT_AGGRATE	15	/* aggregation snapshot rate */
949 #define	DTRACEOPT_SWITCHRATE	16	/* buffer switching rate */
950 #define	DTRACEOPT_STATUSRATE	17	/* status rate */
951 #define	DTRACEOPT_DESTRUCTIVE	18	/* destructive actions allowed */
952 #define	DTRACEOPT_STACKINDENT	19	/* output indent for stack traces */
953 #define	DTRACEOPT_RAWBYTES	20	/* always print bytes in raw form */
954 #define	DTRACEOPT_JSTACKFRAMES	21	/* number of jstack() frames */
955 #define	DTRACEOPT_JSTACKSTRSIZE	22	/* size of jstack() string table */
956 #define	DTRACEOPT_AGGSORTKEY	23	/* sort aggregations by key */
957 #define	DTRACEOPT_AGGSORTREV	24	/* reverse-sort aggregations */
958 #define	DTRACEOPT_AGGSORTPOS	25	/* agg. position to sort on */
959 #define	DTRACEOPT_AGGSORTKEYPOS	26	/* agg. key position to sort on */
960 #define	DTRACEOPT_MAX		27	/* number of options */
961 
962 #define	DTRACEOPT_UNSET		(dtrace_optval_t)-2	/* unset option */
963 
964 #define	DTRACEOPT_BUFPOLICY_RING	0	/* ring buffer */
965 #define	DTRACEOPT_BUFPOLICY_FILL	1	/* fill buffer, then stop */
966 #define	DTRACEOPT_BUFPOLICY_SWITCH	2	/* switch buffers */
967 
968 #define	DTRACEOPT_BUFRESIZE_AUTO	0	/* automatic resizing */
969 #define	DTRACEOPT_BUFRESIZE_MANUAL	1	/* manual resizing */
970 
971 /*
972  * DTrace Buffer Interface
973  *
974  * In order to get a snapshot of the principal or aggregation buffer,
975  * user-level passes a buffer description to the kernel with the dtrace_bufdesc
976  * structure.  This describes which CPU user-level is interested in, and
977  * where user-level wishes the kernel to snapshot the buffer to (the
978  * dtbd_data field).  The kernel uses the same structure to pass back some
979  * information regarding the buffer:  the size of data actually copied out, the
980  * number of drops, the number of errors, and the offset of the oldest record.
981  * If the buffer policy is a "switch" policy, taking a snapshot of the
982  * principal buffer has the additional effect of switching the active and
983  * inactive buffers.  Taking a snapshot of the aggregation buffer _always_ has
984  * the additional effect of switching the active and inactive buffers.
985  */
986 typedef struct dtrace_bufdesc {
987 	uint64_t dtbd_size;			/* size of buffer */
988 	uint32_t dtbd_cpu;			/* CPU or DTRACE_CPUALL */
989 	uint32_t dtbd_errors;			/* number of errors */
990 	uint64_t dtbd_drops;			/* number of drops */
991 	DTRACE_PTR(char, dtbd_data);		/* data */
992 	uint64_t dtbd_oldest;			/* offset of oldest record */
993 } dtrace_bufdesc_t;
994 
995 /*
996  * DTrace Status
997  *
998  * The status of DTrace is relayed via the dtrace_status structure.  This
999  * structure contains members to count drops other than the capacity drops
1000  * available via the buffer interface (see above).  This consists of dynamic
1001  * drops (including capacity dynamic drops, rinsing drops and dirty drops), and
1002  * speculative drops (including capacity speculative drops, drops due to busy
1003  * speculative buffers and drops due to unavailable speculative buffers).
1004  * Additionally, the status structure contains a field to indicate the number
1005  * of "fill"-policy buffers have been filled and a boolean field to indicate
1006  * that exit() has been called.  If the dtst_exiting field is non-zero, no
1007  * further data will be generated until tracing is stopped (at which time any
1008  * enablings of the END action will be processed); if user-level sees that
1009  * this field is non-zero, tracing should be stopped as soon as possible.
1010  */
1011 typedef struct dtrace_status {
1012 	uint64_t dtst_dyndrops;			/* dynamic drops */
1013 	uint64_t dtst_dyndrops_rinsing;		/* dyn drops due to rinsing */
1014 	uint64_t dtst_dyndrops_dirty;		/* dyn drops due to dirty */
1015 	uint64_t dtst_specdrops;		/* speculative drops */
1016 	uint64_t dtst_specdrops_busy;		/* spec drops due to busy */
1017 	uint64_t dtst_specdrops_unavail;	/* spec drops due to unavail */
1018 	uint64_t dtst_errors;			/* total errors */
1019 	uint64_t dtst_filled;			/* number of filled bufs */
1020 	uint64_t dtst_stkstroverflows;		/* stack string tab overflows */
1021 	uint64_t dtst_dblerrors;		/* errors in ERROR probes */
1022 	char dtst_killed;			/* non-zero if killed */
1023 	char dtst_exiting;			/* non-zero if exit() called */
1024 	char dtst_pad[6];			/* pad out to 64-bit align */
1025 } dtrace_status_t;
1026 
1027 /*
1028  * DTrace Configuration
1029  *
1030  * User-level may need to understand some elements of the kernel DTrace
1031  * configuration in order to generate correct DIF.  This information is
1032  * conveyed via the dtrace_conf structure.
1033  */
1034 typedef struct dtrace_conf {
1035 	uint_t dtc_difversion;			/* supported DIF version */
1036 	uint_t dtc_difintregs;			/* # of DIF integer registers */
1037 	uint_t dtc_diftupregs;			/* # of DIF tuple registers */
1038 	uint_t dtc_ctfmodel;			/* CTF data model */
1039 	uint_t dtc_pad[8];			/* reserved for future use */
1040 } dtrace_conf_t;
1041 
1042 /*
1043  * DTrace Faults
1044  *
1045  * The constants below DTRACEFLT_LIBRARY indicate probe processing faults;
1046  * constants at or above DTRACEFLT_LIBRARY indicate faults in probe
1047  * postprocessing at user-level.  Probe processing faults induce an ERROR
1048  * probe and are replicated in unistd.d to allow users' ERROR probes to decode
1049  * the error condition using thse symbolic labels.
1050  */
1051 #define	DTRACEFLT_UNKNOWN		0	/* Unknown fault */
1052 #define	DTRACEFLT_BADADDR		1	/* Bad address */
1053 #define	DTRACEFLT_BADALIGN		2	/* Bad alignment */
1054 #define	DTRACEFLT_ILLOP			3	/* Illegal operation */
1055 #define	DTRACEFLT_DIVZERO		4	/* Divide-by-zero */
1056 #define	DTRACEFLT_NOSCRATCH		5	/* Out of scratch space */
1057 #define	DTRACEFLT_KPRIV			6	/* Illegal kernel access */
1058 #define	DTRACEFLT_UPRIV			7	/* Illegal user access */
1059 #define	DTRACEFLT_TUPOFLOW		8	/* Tuple stack overflow */
1060 
1061 #define	DTRACEFLT_LIBRARY		1000	/* Library-level fault */
1062 
1063 /*
1064  * DTrace Argument Types
1065  *
1066  * Because it would waste both space and time, argument types do not reside
1067  * with the probe.  In order to determine argument types for args[X]
1068  * variables, the D compiler queries for argument types on a probe-by-probe
1069  * basis.  (This optimizes for the common case that arguments are either not
1070  * used or used in an untyped fashion.)  Typed arguments are specified with a
1071  * string of the type name in the dtragd_native member of the argument
1072  * description structure.  Typed arguments may be further translated to types
1073  * of greater stability; the provider indicates such a translated argument by
1074  * filling in the dtargd_xlate member with the string of the translated type.
1075  * Finally, the provider may indicate which argument value a given argument
1076  * maps to by setting the dtargd_mapping member -- allowing a single argument
1077  * to map to multiple args[X] variables.
1078  */
1079 typedef struct dtrace_argdesc {
1080 	dtrace_id_t dtargd_id;			/* probe identifier */
1081 	int dtargd_ndx;				/* arg number (-1 iff none) */
1082 	int dtargd_mapping;			/* value mapping */
1083 	char dtargd_native[DTRACE_ARGTYPELEN];	/* native type name */
1084 	char dtargd_xlate[DTRACE_ARGTYPELEN];	/* translated type name */
1085 } dtrace_argdesc_t;
1086 
1087 /*
1088  * DTrace Stability Attributes
1089  *
1090  * Each DTrace provider advertises the name and data stability of each of its
1091  * probe description components, as well as its architectural dependencies.
1092  * The D compiler can query the provider attributes (dtrace_pattr_t below) in
1093  * order to compute the properties of an input program and report them.
1094  */
1095 typedef uint8_t dtrace_stability_t;	/* stability code (see attributes(5)) */
1096 typedef uint8_t dtrace_class_t;		/* architectural dependency class */
1097 
1098 #define	DTRACE_STABILITY_INTERNAL	0	/* private to DTrace itself */
1099 #define	DTRACE_STABILITY_PRIVATE	1	/* private to Sun (see docs) */
1100 #define	DTRACE_STABILITY_OBSOLETE	2	/* scheduled for removal */
1101 #define	DTRACE_STABILITY_EXTERNAL	3	/* not controlled by Sun */
1102 #define	DTRACE_STABILITY_UNSTABLE	4	/* new or rapidly changing */
1103 #define	DTRACE_STABILITY_EVOLVING	5	/* less rapidly changing */
1104 #define	DTRACE_STABILITY_STABLE		6	/* mature interface from Sun */
1105 #define	DTRACE_STABILITY_STANDARD	7	/* industry standard */
1106 #define	DTRACE_STABILITY_MAX		7	/* maximum valid stability */
1107 
1108 #define	DTRACE_CLASS_UNKNOWN	0	/* unknown architectural dependency */
1109 #define	DTRACE_CLASS_CPU	1	/* CPU-module-specific */
1110 #define	DTRACE_CLASS_PLATFORM	2	/* platform-specific (uname -i) */
1111 #define	DTRACE_CLASS_GROUP	3	/* hardware-group-specific (uname -m) */
1112 #define	DTRACE_CLASS_ISA	4	/* ISA-specific (uname -p) */
1113 #define	DTRACE_CLASS_COMMON	5	/* common to all systems */
1114 #define	DTRACE_CLASS_MAX	5	/* maximum valid class */
1115 
1116 #define	DTRACE_PRIV_NONE	0x0000
1117 #define	DTRACE_PRIV_KERNEL	0x0001
1118 #define	DTRACE_PRIV_USER	0x0002
1119 #define	DTRACE_PRIV_PROC	0x0004
1120 #define	DTRACE_PRIV_OWNER	0x0008
1121 #define	DTRACE_PRIV_ZONEOWNER	0x0010
1122 
1123 #define	DTRACE_PRIV_ALL	\
1124 	(DTRACE_PRIV_KERNEL | DTRACE_PRIV_USER | \
1125 	DTRACE_PRIV_PROC | DTRACE_PRIV_OWNER | DTRACE_PRIV_ZONEOWNER)
1126 
1127 typedef struct dtrace_ppriv {
1128 	uint32_t dtpp_flags;			/* privilege flags */
1129 	uid_t dtpp_uid;				/* user ID */
1130 	zoneid_t dtpp_zoneid;			/* zone ID */
1131 } dtrace_ppriv_t;
1132 
1133 typedef struct dtrace_attribute {
1134 	dtrace_stability_t dtat_name;		/* entity name stability */
1135 	dtrace_stability_t dtat_data;		/* entity data stability */
1136 	dtrace_class_t dtat_class;		/* entity data dependency */
1137 } dtrace_attribute_t;
1138 
1139 typedef struct dtrace_pattr {
1140 	dtrace_attribute_t dtpa_provider;	/* provider attributes */
1141 	dtrace_attribute_t dtpa_mod;		/* module attributes */
1142 	dtrace_attribute_t dtpa_func;		/* function attributes */
1143 	dtrace_attribute_t dtpa_name;		/* name attributes */
1144 	dtrace_attribute_t dtpa_args;		/* args[] attributes */
1145 } dtrace_pattr_t;
1146 
1147 typedef struct dtrace_providerdesc {
1148 	char dtvd_name[DTRACE_PROVNAMELEN];	/* provider name */
1149 	dtrace_pattr_t dtvd_attr;		/* stability attributes */
1150 	dtrace_ppriv_t dtvd_priv;		/* privileges required */
1151 } dtrace_providerdesc_t;
1152 
1153 /*
1154  * DTrace Pseudodevice Interface
1155  *
1156  * DTrace is controlled through ioctl(2)'s to the in-kernel dtrace:dtrace
1157  * pseudodevice driver.  These ioctls comprise the user-kernel interface to
1158  * DTrace.
1159  */
1160 #define	DTRACEIOC		(('d' << 24) | ('t' << 16) | ('r' << 8))
1161 #define	DTRACEIOC_PROVIDER	(DTRACEIOC | 1)		/* provider query */
1162 #define	DTRACEIOC_PROBES	(DTRACEIOC | 2)		/* probe query */
1163 #define	DTRACEIOC_BUFSNAP	(DTRACEIOC | 4)		/* snapshot buffer */
1164 #define	DTRACEIOC_PROBEMATCH	(DTRACEIOC | 5)		/* match probes */
1165 #define	DTRACEIOC_ENABLE	(DTRACEIOC | 6)		/* enable probes */
1166 #define	DTRACEIOC_AGGSNAP	(DTRACEIOC | 7)		/* snapshot agg. */
1167 #define	DTRACEIOC_EPROBE	(DTRACEIOC | 8)		/* get eprobe desc. */
1168 #define	DTRACEIOC_PROBEARG	(DTRACEIOC | 9)		/* get probe arg */
1169 #define	DTRACEIOC_CONF		(DTRACEIOC | 10)	/* get config. */
1170 #define	DTRACEIOC_STATUS	(DTRACEIOC | 11)	/* get status */
1171 #define	DTRACEIOC_GO		(DTRACEIOC | 12)	/* start tracing */
1172 #define	DTRACEIOC_STOP		(DTRACEIOC | 13)	/* stop tracing */
1173 #define	DTRACEIOC_AGGDESC	(DTRACEIOC | 15)	/* get agg. desc. */
1174 #define	DTRACEIOC_FORMAT	(DTRACEIOC | 16)	/* get format str */
1175 #define	DTRACEIOC_DOFGET	(DTRACEIOC | 17)	/* get DOF */
1176 #define	DTRACEIOC_REPLICATE	(DTRACEIOC | 18)	/* replicate enab */
1177 
1178 /*
1179  * DTrace Helpers
1180  *
1181  * In general, DTrace establishes probes in processes and takes actions on
1182  * processes without knowing their specific user-level structures.  Instead of
1183  * existing in the framework, process-specific knowledge is contained by the
1184  * enabling D program -- which can apply process-specific knowledge by making
1185  * appropriate use of DTrace primitives like copyin() and copyinstr() to
1186  * operate on user-level data.  However, there may exist some specific probes
1187  * of particular semantic relevance that the application developer may wish to
1188  * explicitly export.  For example, an application may wish to export a probe
1189  * at the point that it begins and ends certain well-defined transactions.  In
1190  * addition to providing probes, programs may wish to offer assistance for
1191  * certain actions.  For example, in highly dynamic environments (e.g., Java),
1192  * it may be difficult to obtain a stack trace in terms of meaningful symbol
1193  * names (the translation from instruction addresses to corresponding symbol
1194  * names may only be possible in situ); these environments may wish to define
1195  * a series of actions to be applied in situ to obtain a meaningful stack
1196  * trace.
1197  *
1198  * These two mechanisms -- user-level statically defined tracing and assisting
1199  * DTrace actions -- are provided via DTrace _helpers_.  Helpers are specified
1200  * via DOF, but unlike enabling DOF, helper DOF may contain definitions of
1201  * providers, probes and their arguments.  If a helper wishes to provide
1202  * action assistance, probe descriptions and corresponding DIF actions may be
1203  * specified in the helper DOF.  For such helper actions, however, the probe
1204  * description describes the specific helper:  all DTrace helpers have the
1205  * provider name "dtrace" and the module name "helper", and the name of the
1206  * helper is contained in the function name (for example, the ustack() helper
1207  * is named "ustack").  Any helper-specific name may be contained in the name
1208  * (for example, if a helper were to have a constructor, it might be named
1209  * "dtrace:helper:<helper>:init").  Helper actions are only called when the
1210  * action that they are helping is taken.  Helper actions may only return DIF
1211  * expressions, and may only call the following subroutines:
1212  *
1213  *    alloca()      <= Allocates memory out of the consumer's scratch space
1214  *    bcopy()       <= Copies memory to scratch space
1215  *    copyin()      <= Copies memory from user-level into consumer's scratch
1216  *    copyinto()    <= Copies memory into a specific location in scratch
1217  *    copyinstr()   <= Copies a string into a specific location in scratch
1218  *
1219  * Helper actions may only access the following built-in variables:
1220  *
1221  *    curthread     <= Current kthread_t pointer
1222  *    tid           <= Current thread identifier
1223  *    pid           <= Current process identifier
1224  *    execname      <= Current executable name
1225  *
1226  * Helper actions may not manipulate or allocate dynamic variables, but they
1227  * may have clause-local and statically-allocated global variables.  The
1228  * helper action variable state is specific to the helper action -- variables
1229  * used by the helper action may not be accessed outside of the helper
1230  * action, and the helper action may not access variables that like outside
1231  * of it.  Helper actions may not load from kernel memory at-large; they are
1232  * restricting to loading current user state (via copyin() and variants) and
1233  * scratch space.  As with probe enablings, helper actions are executed in
1234  * program order.  The result of the helper action is the result of the last
1235  * executing helper expression.
1236  *
1237  * Helpers -- composed of either providers/probes or probes/actions (or both)
1238  * -- are added by opening the "helper" minor node, and issuing an ioctl(2)
1239  * (DTRACEHIOC_ADDDOF) that specifies the dof_helper_t structure. This
1240  * encapsulates the name and base address of the user-level library or
1241  * executable publishing the helpers and probes as well as the DOF that
1242  * contains the definitions of those helpers and probes.
1243  *
1244  * The DTRACEHIOC_ADD and DTRACEHIOC_REMOVE are left in place for legacy
1245  * helpers and should no longer be used.  No other ioctls are valid on the
1246  * helper minor node.
1247  */
1248 #define	DTRACEHIOC		(('d' << 24) | ('t' << 16) | ('h' << 8))
1249 #define	DTRACEHIOC_ADD		(DTRACEHIOC | 1)	/* add helper */
1250 #define	DTRACEHIOC_REMOVE	(DTRACEHIOC | 2)	/* remove helper */
1251 #define	DTRACEHIOC_ADDDOF	(DTRACEHIOC | 3)	/* add helper DOF */
1252 
1253 typedef struct dof_helper {
1254 	char dofhp_mod[DTRACE_MODNAMELEN];	/* executable or library name */
1255 	uint64_t dofhp_addr;			/* base address of object */
1256 	uint64_t dofhp_dof;			/* address of helper DOF */
1257 } dof_helper_t;
1258 
1259 #define	DTRACEMNR_DTRACE	"dtrace"	/* node for DTrace ops */
1260 #define	DTRACEMNR_HELPER	"helper"	/* node for helpers */
1261 #define	DTRACEMNRN_DTRACE	0		/* minor for DTrace ops */
1262 #define	DTRACEMNRN_HELPER	1		/* minor for helpers */
1263 #define	DTRACEMNRN_CLONE	2		/* first clone minor */
1264 
1265 #ifdef _KERNEL
1266 
1267 /*
1268  * DTrace Provider API
1269  *
1270  * The following functions are implemented by the DTrace framework and are
1271  * used to implement separate in-kernel DTrace providers.  Common functions
1272  * are provided in uts/common/os/dtrace.c.  ISA-dependent subroutines are
1273  * defined in uts/<isa>/dtrace/dtrace_asm.s or uts/<isa>/dtrace/dtrace_isa.c.
1274  *
1275  * The provider API has two halves:  the API that the providers consume from
1276  * DTrace, and the API that providers make available to DTrace.
1277  *
1278  * 1 Framework-to-Provider API
1279  *
1280  * 1.1  Overview
1281  *
1282  * The Framework-to-Provider API is represented by the dtrace_pops structure
1283  * that the provider passes to the framework when registering itself.  This
1284  * structure consists of the following members:
1285  *
1286  *   dtps_provide()          <-- Provide all probes, all modules
1287  *   dtps_provide_module()   <-- Provide all probes in specified module
1288  *   dtps_enable()           <-- Enable specified probe
1289  *   dtps_disable()          <-- Disable specified probe
1290  *   dtps_suspend()          <-- Suspend specified probe
1291  *   dtps_resume()           <-- Resume specified probe
1292  *   dtps_getargdesc()       <-- Get the argument description for args[X]
1293  *   dtps_getargval()        <-- Get the value for an argX or args[X] variable
1294  *   dtps_usermode()         <-- Find out if the probe was fired in user mode
1295  *   dtps_destroy()          <-- Destroy all state associated with this probe
1296  *
1297  * 1.2  void dtps_provide(void *arg, const dtrace_probedesc_t *spec)
1298  *
1299  * 1.2.1  Overview
1300  *
1301  *   Called to indicate that the provider should provide all probes.  If the
1302  *   specified description is non-NULL, dtps_provide() is being called because
1303  *   no probe matched a specified probe -- if the provider has the ability to
1304  *   create custom probes, it may wish to create a probe that matches the
1305  *   specified description.
1306  *
1307  * 1.2.2  Arguments and notes
1308  *
1309  *   The first argument is the cookie as passed to dtrace_register().  The
1310  *   second argument is a pointer to a probe description that the provider may
1311  *   wish to consider when creating custom probes.  The provider is expected to
1312  *   call back into the DTrace framework via dtrace_probe_create() to create
1313  *   any necessary probes.  dtps_provide() may be called even if the provider
1314  *   has made available all probes; the provider should check the return value
1315  *   of dtrace_probe_create() to handle this case.  Note that the provider need
1316  *   not implement both dtps_provide() and dtps_provide_module(); see
1317  *   "Arguments and Notes" for dtrace_register(), below.
1318  *
1319  * 1.2.3  Return value
1320  *
1321  *   None.
1322  *
1323  * 1.2.4  Caller's context
1324  *
1325  *   dtps_provide() is typically called from open() or ioctl() context, but may
1326  *   be called from other contexts as well.  The DTrace framework is locked in
1327  *   such a way that providers may not register or unregister.  This means that
1328  *   the provider may not call any DTrace API that affects its registration with
1329  *   the framework, including dtrace_register(), dtrace_unregister(),
1330  *   dtrace_invalidate(), and dtrace_condense().  However, the context is such
1331  *   that the provider may (and indeed, is expected to) call probe-related
1332  *   DTrace routines, including dtrace_probe_create(), dtrace_probe_lookup(),
1333  *   and dtrace_probe_arg().
1334  *
1335  * 1.3  void dtps_provide_module(void *arg, struct modctl *mp)
1336  *
1337  * 1.3.1  Overview
1338  *
1339  *   Called to indicate that the provider should provide all probes in the
1340  *   specified module.
1341  *
1342  * 1.3.2  Arguments and notes
1343  *
1344  *   The first argument is the cookie as passed to dtrace_register().  The
1345  *   second argument is a pointer to a modctl structure that indicates the
1346  *   module for which probes should be created.
1347  *
1348  * 1.3.3  Return value
1349  *
1350  *   None.
1351  *
1352  * 1.3.4  Caller's context
1353  *
1354  *   dtps_provide_module() may be called from open() or ioctl() context, but
1355  *   may also be called from a module loading context.  mod_lock is held, and
1356  *   the DTrace framework is locked in such a way that providers may not
1357  *   register or unregister.  This means that the provider may not call any
1358  *   DTrace API that affects its registration with the framework, including
1359  *   dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and
1360  *   dtrace_condense().  However, the context is such that the provider may (and
1361  *   indeed, is expected to) call probe-related DTrace routines, including
1362  *   dtrace_probe_create(), dtrace_probe_lookup(), and dtrace_probe_arg().  Note
1363  *   that the provider need not implement both dtps_provide() and
1364  *   dtps_provide_module(); see "Arguments and Notes" for dtrace_register(),
1365  *   below.
1366  *
1367  * 1.4  void dtps_enable(void *arg, dtrace_id_t id, void *parg)
1368  *
1369  * 1.4.1  Overview
1370  *
1371  *   Called to enable the specified probe.
1372  *
1373  * 1.4.2  Arguments and notes
1374  *
1375  *   The first argument is the cookie as passed to dtrace_register().  The
1376  *   second argument is the identifier of the probe to be enabled.  The third
1377  *   argument is the probe argument as passed to dtrace_probe_create().
1378  *   dtps_enable() will be called when a probe transitions from not being
1379  *   enabled at all to having one or more ECB.  The number of ECBs associated
1380  *   with the probe may change without subsequent calls into the provider.
1381  *   When the number of ECBs drops to zero, the provider will be explicitly
1382  *   told to disable the probe via dtps_disable().  dtrace_probe() should never
1383  *   be called for a probe identifier that hasn't been explicitly enabled via
1384  *   dtps_enable().
1385  *
1386  * 1.4.3  Return value
1387  *
1388  *   None.
1389  *
1390  * 1.4.4  Caller's context
1391  *
1392  *   The DTrace framework is locked in such a way that it may not be called
1393  *   back into at all.  cpu_lock is held.  mod_lock is not held and may not
1394  *   be acquired.
1395  *
1396  * 1.5  void dtps_disable(void *arg, dtrace_id_t id, void *parg)
1397  *
1398  * 1.5.1  Overview
1399  *
1400  *   Called to disable the specified probe.
1401  *
1402  * 1.5.2  Arguments and notes
1403  *
1404  *   The first argument is the cookie as passed to dtrace_register().  The
1405  *   second argument is the identifier of the probe to be disabled.  The third
1406  *   argument is the probe argument as passed to dtrace_probe_create().
1407  *   dtps_disable() will be called when a probe transitions from being enabled
1408  *   to having zero ECBs.  dtrace_probe() should never be called for a probe
1409  *   identifier that has been explicitly enabled via dtps_disable().
1410  *
1411  * 1.5.3  Return value
1412  *
1413  *   None.
1414  *
1415  * 1.5.4  Caller's context
1416  *
1417  *   The DTrace framework is locked in such a way that it may not be called
1418  *   back into at all.  cpu_lock is held.  mod_lock is not held and may not
1419  *   be acquired.
1420  *
1421  * 1.6  void dtps_suspend(void *arg, dtrace_id_t id, void *parg)
1422  *
1423  * 1.6.1  Overview
1424  *
1425  *   Called to suspend the specified enabled probe.  This entry point is for
1426  *   providers that may need to suspend some or all of their probes when CPUs
1427  *   are being powered on or when the boot monitor is being entered for a
1428  *   prolonged period of time.
1429  *
1430  * 1.6.2  Arguments and notes
1431  *
1432  *   The first argument is the cookie as passed to dtrace_register().  The
1433  *   second argument is the identifier of the probe to be suspended.  The
1434  *   third argument is the probe argument as passed to dtrace_probe_create().
1435  *   dtps_suspend will only be called on an enabled probe.  Providers that
1436  *   provide a dtps_suspend entry point will want to take roughly the action
1437  *   that it takes for dtps_disable.
1438  *
1439  * 1.6.3  Return value
1440  *
1441  *   None.
1442  *
1443  * 1.6.4  Caller's context
1444  *
1445  *   Interrupts are disabled.  The DTrace framework is in a state such that the
1446  *   specified probe cannot be disabled or destroyed for the duration of
1447  *   dtps_suspend().  As interrupts are disabled, the provider is afforded
1448  *   little latitude; the provider is expected to do no more than a store to
1449  *   memory.
1450  *
1451  * 1.7  void dtps_resume(void *arg, dtrace_id_t id, void *parg)
1452  *
1453  * 1.7.1  Overview
1454  *
1455  *   Called to resume the specified enabled probe.  This entry point is for
1456  *   providers that may need to resume some or all of their probes after the
1457  *   completion of an event that induced a call to dtps_suspend().
1458  *
1459  * 1.7.2  Arguments and notes
1460  *
1461  *   The first argument is the cookie as passed to dtrace_register().  The
1462  *   second argument is the identifier of the probe to be resumed.  The
1463  *   third argument is the probe argument as passed to dtrace_probe_create().
1464  *   dtps_resume will only be called on an enabled probe.  Providers that
1465  *   provide a dtps_resume entry point will want to take roughly the action
1466  *   that it takes for dtps_enable.
1467  *
1468  * 1.7.3  Return value
1469  *
1470  *   None.
1471  *
1472  * 1.7.4  Caller's context
1473  *
1474  *   Interrupts are disabled.  The DTrace framework is in a state such that the
1475  *   specified probe cannot be disabled or destroyed for the duration of
1476  *   dtps_resume().  As interrupts are disabled, the provider is afforded
1477  *   little latitude; the provider is expected to do no more than a store to
1478  *   memory.
1479  *
1480  * 1.8  void dtps_getargdesc(void *arg, dtrace_id_t id, void *parg,
1481  *           dtrace_argdesc_t *desc)
1482  *
1483  * 1.8.1  Overview
1484  *
1485  *   Called to retrieve the argument description for an args[X] variable.
1486  *
1487  * 1.8.2  Arguments and notes
1488  *
1489  *   The first argument is the cookie as passed to dtrace_register(). The
1490  *   second argument is the identifier of the current probe. The third
1491  *   argument is the probe argument as passed to dtrace_probe_create(). The
1492  *   fourth argument is a pointer to the argument description.  This
1493  *   description is both an input and output parameter:  it contains the
1494  *   index of the desired argument in the dtargd_ndx field, and expects
1495  *   the other fields to be filled in upon return.  If there is no argument
1496  *   corresponding to the specified index, the dtargd_ndx field should be set
1497  *   to DTRACE_ARGNONE.
1498  *
1499  * 1.8.3  Return value
1500  *
1501  *   None.  The dtargd_ndx, dtargd_native, dtargd_xlate and dtargd_mapping
1502  *   members of the dtrace_argdesc_t structure are all output values.
1503  *
1504  * 1.8.4  Caller's context
1505  *
1506  *   dtps_getargdesc() is called from ioctl() context. mod_lock is held, and
1507  *   the DTrace framework is locked in such a way that providers may not
1508  *   register or unregister.  This means that the provider may not call any
1509  *   DTrace API that affects its registration with the framework, including
1510  *   dtrace_register(), dtrace_unregister(), dtrace_invalidate(), and
1511  *   dtrace_condense().
1512  *
1513  * 1.9  uint64_t dtps_getargval(void *arg, dtrace_id_t id, void *parg,
1514  *               int argno, int aframes)
1515  *
1516  * 1.9.1  Overview
1517  *
1518  *   Called to retrieve a value for an argX or args[X] variable.
1519  *
1520  * 1.9.2  Arguments and notes
1521  *
1522  *   The first argument is the cookie as passed to dtrace_register(). The
1523  *   second argument is the identifier of the current probe. The third
1524  *   argument is the probe argument as passed to dtrace_probe_create(). The
1525  *   fourth argument is the number of the argument (the X in the example in
1526  *   1.9.1). The fifth argument is the number of stack frames that were used
1527  *   to get from the actual place in the code that fired the probe to
1528  *   dtrace_probe() itself, the so-called artificial frames. This argument may
1529  *   be used to descend an appropriate number of frames to find the correct
1530  *   values. If this entry point is left NULL, the dtrace_getarg() built-in
1531  *   function is used.
1532  *
1533  * 1.9.3  Return value
1534  *
1535  *   The value of the argument.
1536  *
1537  * 1.9.4  Caller's context
1538  *
1539  *   This is called from within dtrace_probe() meaning that interrupts
1540  *   are disabled. No locks should be taken within this entry point.
1541  *
1542  * 1.10  int dtps_usermode(void *arg, dtrace_id_t id, void *parg)
1543  *
1544  * 1.10.1  Overview
1545  *
1546  *   Called to determine if the probe was fired in a user context.
1547  *
1548  * 1.10.2  Arguments and notes
1549  *
1550  *   The first argument is the cookie as passed to dtrace_register(). The
1551  *   second argument is the identifier of the current probe. The third
1552  *   argument is the probe argument as passed to dtrace_probe_create().  This
1553  *   entry point must not be left NULL for providers whose probes allow for
1554  *   mixed mode tracing, that is to say those probes that can fire during
1555  *   kernel- _or_ user-mode execution
1556  *
1557  * 1.10.3  Return value
1558  *
1559  *   A boolean value.
1560  *
1561  * 1.10.4  Caller's context
1562  *
1563  *   This is called from within dtrace_probe() meaning that interrupts
1564  *   are disabled. No locks should be taken within this entry point.
1565  *
1566  * 1.11 void dtps_destroy(void *arg, dtrace_id_t id, void *parg)
1567  *
1568  * 1.11.1 Overview
1569  *
1570  *   Called to destroy the specified probe.
1571  *
1572  * 1.11.2 Arguments and notes
1573  *
1574  *   The first argument is the cookie as passed to dtrace_register().  The
1575  *   second argument is the identifier of the probe to be destroyed.  The third
1576  *   argument is the probe argument as passed to dtrace_probe_create().  The
1577  *   provider should free all state associated with the probe.  The framework
1578  *   guarantees that dtps_destroy() is only called for probes that have either
1579  *   been disabled via dtps_disable() or were never enabled via dtps_enable().
1580  *   Once dtps_disable() has been called for a probe, no further call will be
1581  *   made specifying the probe.
1582  *
1583  * 1.11.3 Return value
1584  *
1585  *   None.
1586  *
1587  * 1.11.4 Caller's context
1588  *
1589  *   The DTrace framework is locked in such a way that it may not be called
1590  *   back into at all.  mod_lock is held.  cpu_lock is not held, and may not be
1591  *   acquired.
1592  *
1593  *
1594  * 2 Provider-to-Framework API
1595  *
1596  * 2.1  Overview
1597  *
1598  * The Provider-to-Framework API provides the mechanism for the provider to
1599  * register itself with the DTrace framework, to create probes, to lookup
1600  * probes and (most importantly) to fire probes.  The Provider-to-Framework
1601  * consists of:
1602  *
1603  *   dtrace_register()       <-- Register a provider with the DTrace framework
1604  *   dtrace_unregister()     <-- Remove a provider's DTrace registration
1605  *   dtrace_invalidate()     <-- Invalidate the specified provider
1606  *   dtrace_condense()       <-- Remove a provider's unenabled probes
1607  *   dtrace_attached()       <-- Indicates whether or not DTrace has attached
1608  *   dtrace_probe_create()   <-- Create a DTrace probe
1609  *   dtrace_probe_lookup()   <-- Lookup a DTrace probe based on its name
1610  *   dtrace_probe_arg()      <-- Return the probe argument for a specific probe
1611  *   dtrace_probe()          <-- Fire the specified probe
1612  *
1613  * 2.2  int dtrace_register(const char *name, const dtrace_pattr_t *pap,
1614  *          uint32_t priv, cred_t *cr, const dtrace_pops_t *pops, void *arg,
1615  *          dtrace_provider_id_t *idp)
1616  *
1617  * 2.2.1  Overview
1618  *
1619  *   dtrace_register() registers the calling provider with the DTrace
1620  *   framework.  It should generally be called by DTrace providers in their
1621  *   attach(9E) entry point.
1622  *
1623  * 2.2.2  Arguments and Notes
1624  *
1625  *   The first argument is the name of the provider.  The second argument is a
1626  *   pointer to the stability attributes for the provider.  The third argument
1627  *   is the privilege flags for the provider, and must be some combination of:
1628  *
1629  *     DTRACE_PRIV_NONE     <= All users may enable probes from this provider
1630  *
1631  *     DTRACE_PRIV_PROC     <= Any user with privilege of PRIV_DTRACE_PROC may
1632  *                             enable probes from this provider
1633  *
1634  *     DTRACE_PRIV_USER     <= Any user with privilege of PRIV_DTRACE_USER may
1635  *                             enable probes from this provider
1636  *
1637  *     DTRACE_PRIV_KERNEL   <= Any user with privilege of PRIV_DTRACE_KERNEL
1638  *                             may enable probes from this provider
1639  *
1640  *     DTRACE_PRIV_OWNER    <= This flag places an additional constraint on
1641  *                             the privilege requirements above. These probes
1642  *                             require either (a) a user ID matching the user
1643  *                             ID of the cred passed in the fourth argument
1644  *                             or (b) the PRIV_PROC_OWNER privilege.
1645  *
1646  *     DTRACE_PRIV_ZONEOWNER<= This flag places an additional constraint on
1647  *                             the privilege requirements above. These probes
1648  *                             require either (a) a zone ID matching the zone
1649  *                             ID of the cred passed in the fourth argument
1650  *                             or (b) the PRIV_PROC_ZONE privilege.
1651  *
1652  *   Note that these flags designate the _visibility_ of the probes, not
1653  *   the conditions under which they may or may not fire.
1654  *
1655  *   The fourth argument is the credential that is associated with the
1656  *   provider.  This argument should be NULL if the privilege flags don't
1657  *   include DTRACE_PRIV_OWNER or DTRACE_PRIV_ZONEOWNER.  If non-NULL, the
1658  *   framework stashes the uid and zoneid represented by this credential
1659  *   for use at probe-time, in implicit predicates.  These limit visibility
1660  *   of the probes to users and/or zones which have sufficient privilege to
1661  *   access them.
1662  *
1663  *   The fifth argument is a DTrace provider operations vector, which provides
1664  *   the implementation for the Framework-to-Provider API.  (See Section 1,
1665  *   above.)  This must be non-NULL, and each member must be non-NULL.  The
1666  *   exceptions to this are (1) the dtps_provide() and dtps_provide_module()
1667  *   members (if the provider so desires, _one_ of these members may be left
1668  *   NULL -- denoting that the provider only implements the other) and (2)
1669  *   the dtps_suspend() and dtps_resume() members, which must either both be
1670  *   NULL or both be non-NULL.
1671  *
1672  *   The sixth argument is a cookie to be specified as the first argument for
1673  *   each function in the Framework-to-Provider API.  This argument may have
1674  *   any value.
1675  *
1676  *   The final argument is a pointer to dtrace_provider_id_t.  If
1677  *   dtrace_register() successfully completes, the provider identifier will be
1678  *   stored in the memory pointed to be this argument.  This argument must be
1679  *   non-NULL.
1680  *
1681  * 2.2.3  Return value
1682  *
1683  *   On success, dtrace_register() returns 0 and stores the new provider's
1684  *   identifier into the memory pointed to by the idp argument.  On failure,
1685  *   dtrace_register() returns an errno:
1686  *
1687  *     EINVAL   The arguments passed to dtrace_register() were somehow invalid.
1688  *              This may because a parameter that must be non-NULL was NULL,
1689  *              because the name was invalid (either empty or an illegal
1690  *              provider name) or because the attributes were invalid.
1691  *
1692  *   No other failure code is returned.
1693  *
1694  * 2.2.4  Caller's context
1695  *
1696  *   dtrace_register() may induce calls to dtrace_provide(); the provider must
1697  *   hold no locks across dtrace_register() that may also be acquired by
1698  *   dtrace_provide().  cpu_lock and mod_lock must not be held.
1699  *
1700  * 2.3  int dtrace_unregister(dtrace_provider_t id)
1701  *
1702  * 2.3.1  Overview
1703  *
1704  *   Unregisters the specified provider from the DTrace framework.  It should
1705  *   generally be called by DTrace providers in their detach(9E) entry point.
1706  *
1707  * 2.3.2  Arguments and Notes
1708  *
1709  *   The only argument is the provider identifier, as returned from a
1710  *   successful call to dtrace_register().  As a result of calling
1711  *   dtrace_unregister(), the DTrace framework will call back into the provider
1712  *   via the dtps_destroy() entry point.  Once dtrace_unregister() successfully
1713  *   completes, however, the DTrace framework will no longer make calls through
1714  *   the Framework-to-Provider API.
1715  *
1716  * 2.3.3  Return value
1717  *
1718  *   On success, dtrace_unregister returns 0.  On failure, dtrace_unregister()
1719  *   returns an errno:
1720  *
1721  *     EBUSY    There are currently processes that have the DTrace pseudodevice
1722  *              open, or there exists an anonymous enabling that hasn't yet
1723  *              been claimed.
1724  *
1725  *   No other failure code is returned.
1726  *
1727  * 2.3.4  Caller's context
1728  *
1729  *   Because a call to dtrace_unregister() may induce calls through the
1730  *   Framework-to-Provider API, the caller may not hold any lock across
1731  *   dtrace_register() that is also acquired in any of the Framework-to-
1732  *   Provider API functions.  Additionally, mod_lock may not be held.
1733  *
1734  * 2.4  void dtrace_invalidate(dtrace_provider_id_t id)
1735  *
1736  * 2.4.1  Overview
1737  *
1738  *   Invalidates the specified provider.  All subsequent probe lookups for the
1739  *   specified provider will fail, but its probes will not be removed.
1740  *
1741  * 2.4.2  Arguments and note
1742  *
1743  *   The only argument is the provider identifier, as returned from a
1744  *   successful call to dtrace_register().  In general, a provider's probes
1745  *   always remain valid; dtrace_invalidate() is a mechanism for invalidating
1746  *   an entire provider, regardless of whether or not probes are enabled or
1747  *   not.  Note that dtrace_invalidate() will _not_ prevent already enabled
1748  *   probes from firing -- it will merely prevent any new enablings of the
1749  *   provider's probes.
1750  *
1751  * 2.5 int dtrace_condense(dtrace_provider_id_t id)
1752  *
1753  * 2.5.1  Overview
1754  *
1755  *   Removes all the unenabled probes for the given provider. This function is
1756  *   not unlike dtrace_unregister(), except that it doesn't remove the
1757  *   provider just as many of its associated probes as it can.
1758  *
1759  * 2.5.2  Arguments and Notes
1760  *
1761  *   As with dtrace_unregister(), the sole argument is the provider identifier
1762  *   as returned from a successful call to dtrace_register().  As a result of
1763  *   calling dtrace_condense(), the DTrace framework will call back into the
1764  *   given provider's dtps_destroy() entry point for each of the provider's
1765  *   unenabled probes.
1766  *
1767  * 2.5.3  Return value
1768  *
1769  *   Currently, dtrace_condense() always returns 0.  However, consumers of this
1770  *   function should check the return value as appropriate; its behavior may
1771  *   change in the future.
1772  *
1773  * 2.5.4  Caller's context
1774  *
1775  *   As with dtrace_unregister(), the caller may not hold any lock across
1776  *   dtrace_condense() that is also acquired in the provider's entry points.
1777  *   Also, mod_lock may not be held.
1778  *
1779  * 2.6 int dtrace_attached()
1780  *
1781  * 2.6.1  Overview
1782  *
1783  *   Indicates whether or not DTrace has attached.
1784  *
1785  * 2.6.2  Arguments and Notes
1786  *
1787  *   For most providers, DTrace makes initial contact beyond registration.
1788  *   That is, once a provider has registered with DTrace, it waits to hear
1789  *   from DTrace to create probes.  However, some providers may wish to
1790  *   proactively create probes without first being told by DTrace to do so.
1791  *   If providers wish to do this, they must first call dtrace_attached() to
1792  *   determine if DTrace itself has attached.  If dtrace_attached() returns 0,
1793  *   the provider must not make any other Provider-to-Framework API call.
1794  *
1795  * 2.6.3  Return value
1796  *
1797  *   dtrace_attached() returns 1 if DTrace has attached, 0 otherwise.
1798  *
1799  * 2.7  int dtrace_probe_create(dtrace_provider_t id, const char *mod,
1800  *	    const char *func, const char *name, int aframes, void *arg)
1801  *
1802  * 2.7.1  Overview
1803  *
1804  *   Creates a probe with specified module name, function name, and name.
1805  *
1806  * 2.7.2  Arguments and Notes
1807  *
1808  *   The first argument is the provider identifier, as returned from a
1809  *   successful call to dtrace_register().  The second, third, and fourth
1810  *   arguments are the module name, function name, and probe name,
1811  *   respectively.  Of these, module name and function name may both be NULL
1812  *   (in which case the probe is considered to be unanchored), or they may both
1813  *   be non-NULL.  The name must be non-NULL, and must point to a non-empty
1814  *   string.
1815  *
1816  *   The fifth argument is the number of artificial stack frames that will be
1817  *   found on the stack when dtrace_probe() is called for the new probe.  These
1818  *   artificial frames will be automatically be pruned should the stack() or
1819  *   stackdepth() functions be called as part of one of the probe's ECBs.  If
1820  *   the parameter doesn't add an artificial frame, this parameter should be
1821  *   zero.
1822  *
1823  *   The final argument is a probe argument that will be passed back to the
1824  *   provider when a probe-specific operation is called.  (e.g., via
1825  *   dtps_enable(), dtps_disable(), etc.)
1826  *
1827  *   Note that it is up to the provider to be sure that the probe that it
1828  *   creates does not already exist -- if the provider is unsure of the probe's
1829  *   existence, it should assure its absence with dtrace_probe_lookup() before
1830  *   calling dtrace_probe_create().
1831  *
1832  * 2.7.3  Return value
1833  *
1834  *   dtrace_probe_create() always succeeds, and always returns the identifier
1835  *   of the newly-created probe.
1836  *
1837  * 2.7.4  Caller's context
1838  *
1839  *   While dtrace_probe_create() is generally expected to be called from
1840  *   dtps_provide() and/or dtps_provide_module(), it may be called from other
1841  *   non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1842  *
1843  * 2.8  dtrace_id_t dtrace_probe_lookup(dtrace_provider_t id, const char *mod,
1844  *	    const char *func, const char *name)
1845  *
1846  * 2.8.1  Overview
1847  *
1848  *   Looks up a probe based on provdider and one or more of module name,
1849  *   function name and probe name.
1850  *
1851  * 2.8.2  Arguments and Notes
1852  *
1853  *   The first argument is the provider identifier, as returned from a
1854  *   successful call to dtrace_register().  The second, third, and fourth
1855  *   arguments are the module name, function name, and probe name,
1856  *   respectively.  Any of these may be NULL; dtrace_probe_lookup() will return
1857  *   the identifier of the first probe that is provided by the specified
1858  *   provider and matches all of the non-NULL matching criteria.
1859  *   dtrace_probe_lookup() is generally used by a provider to be check the
1860  *   existence of a probe before creating it with dtrace_probe_create().
1861  *
1862  * 2.8.3  Return value
1863  *
1864  *   If the probe exists, returns its identifier.  If the probe does not exist,
1865  *   return DTRACE_IDNONE.
1866  *
1867  * 2.8.4  Caller's context
1868  *
1869  *   While dtrace_probe_lookup() is generally expected to be called from
1870  *   dtps_provide() and/or dtps_provide_module(), it may also be called from
1871  *   other non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1872  *
1873  * 2.9  void *dtrace_probe_arg(dtrace_provider_t id, dtrace_id_t probe)
1874  *
1875  * 2.9.1  Overview
1876  *
1877  *   Returns the probe argument associated with the specified probe.
1878  *
1879  * 2.9.2  Arguments and Notes
1880  *
1881  *   The first argument is the provider identifier, as returned from a
1882  *   successful call to dtrace_register().  The second argument is a probe
1883  *   identifier, as returned from dtrace_probe_lookup() or
1884  *   dtrace_probe_create().  This is useful if a probe has multiple
1885  *   provider-specific components to it:  the provider can create the probe
1886  *   once with provider-specific state, and then add to the state by looking
1887  *   up the probe based on probe identifier.
1888  *
1889  * 2.9.3  Return value
1890  *
1891  *   Returns the argument associated with the specified probe.  If the
1892  *   specified probe does not exist, or if the specified probe is not provided
1893  *   by the specified provider, NULL is returned.
1894  *
1895  * 2.9.4  Caller's context
1896  *
1897  *   While dtrace_probe_arg() is generally expected to be called from
1898  *   dtps_provide() and/or dtps_provide_module(), it may also be called from
1899  *   other non-DTrace contexts.  Neither cpu_lock nor mod_lock may be held.
1900  *
1901  * 2.10  void dtrace_probe(dtrace_id_t probe, uintptr_t arg0, uintptr_t arg1,
1902  *		uintptr_t arg2, uintptr_t arg3, uintptr_t arg4)
1903  *
1904  * 2.10.1  Overview
1905  *
1906  *   The epicenter of DTrace:  fires the specified probes with the specified
1907  *   arguments.
1908  *
1909  * 2.10.2  Arguments and Notes
1910  *
1911  *   The first argument is a probe identifier as returned by
1912  *   dtrace_probe_create() or dtrace_probe_lookup().  The second through sixth
1913  *   arguments are the values to which the D variables "arg0" through "arg4"
1914  *   will be mapped.
1915  *
1916  *   dtrace_probe() should be called whenever the specified probe has fired --
1917  *   however the provider defines it.
1918  *
1919  * 2.10.3  Return value
1920  *
1921  *   None.
1922  *
1923  * 2.10.4  Caller's context
1924  *
1925  *   dtrace_probe() may be called in virtually any context:  kernel, user,
1926  *   interrupt, high-level interrupt, with arbitrary adaptive locks held, with
1927  *   dispatcher locks held, with interrupts disabled, etc.  The only latitude
1928  *   that must be afforded to DTrace is the ability to make calls within
1929  *   itself (and to its in-kernel subroutines) and the ability to access
1930  *   arbitrary (but mapped) memory.  On some platforms, this constrains
1931  *   context.  For example, on UltraSPARC, dtrace_probe() cannot be called
1932  *   from any context in which TL is greater than zero.  dtrace_probe() may
1933  *   also not be called from any routine which may be called by dtrace_probe()
1934  *   -- which includes functions in the DTrace framework and some in-kernel
1935  *   DTrace subroutines.  All such functions "dtrace_"; providers that
1936  *   instrument the kernel arbitrarily should be sure to not instrument these
1937  *   routines.
1938  */
1939 typedef struct dtrace_pops {
1940 	void (*dtps_provide)(void *arg, const dtrace_probedesc_t *spec);
1941 	void (*dtps_provide_module)(void *arg, struct modctl *mp);
1942 	void (*dtps_enable)(void *arg, dtrace_id_t id, void *parg);
1943 	void (*dtps_disable)(void *arg, dtrace_id_t id, void *parg);
1944 	void (*dtps_suspend)(void *arg, dtrace_id_t id, void *parg);
1945 	void (*dtps_resume)(void *arg, dtrace_id_t id, void *parg);
1946 	void (*dtps_getargdesc)(void *arg, dtrace_id_t id, void *parg,
1947 	    dtrace_argdesc_t *desc);
1948 	uint64_t (*dtps_getargval)(void *arg, dtrace_id_t id, void *parg,
1949 	    int argno, int aframes);
1950 	int (*dtps_usermode)(void *arg, dtrace_id_t id, void *parg);
1951 	void (*dtps_destroy)(void *arg, dtrace_id_t id, void *parg);
1952 } dtrace_pops_t;
1953 
1954 typedef uintptr_t	dtrace_provider_id_t;
1955 
1956 extern int dtrace_register(const char *, const dtrace_pattr_t *, uint32_t,
1957     cred_t *, const dtrace_pops_t *, void *, dtrace_provider_id_t *);
1958 extern int dtrace_unregister(dtrace_provider_id_t);
1959 extern int dtrace_condense(dtrace_provider_id_t);
1960 extern void dtrace_invalidate(dtrace_provider_id_t);
1961 extern dtrace_id_t dtrace_probe_lookup(dtrace_provider_id_t, const char *,
1962     const char *, const char *);
1963 extern dtrace_id_t dtrace_probe_create(dtrace_provider_id_t, const char *,
1964     const char *, const char *, int, void *);
1965 extern void *dtrace_probe_arg(dtrace_provider_id_t, dtrace_id_t);
1966 extern void dtrace_probe(dtrace_id_t, uintptr_t arg0, uintptr_t arg1,
1967     uintptr_t arg2, uintptr_t arg3, uintptr_t arg4);
1968 
1969 /*
1970  * DTrace Meta Provider API
1971  *
1972  * The following functions are implemented by the DTrace framework and are
1973  * used to implement meta providers. Meta providers plug into the DTrace
1974  * framework and are used to instantiate new providers on the fly. At
1975  * present, there is only one type of meta provider and only one meta
1976  * provider may be registered with the DTrace framework at a time. The
1977  * sole meta provider type provides user-land static tracing facilities
1978  * by taking meta probe descriptions and adding a corresponding provider
1979  * into the DTrace framework.
1980  *
1981  * 1 Framework-to-Provider
1982  *
1983  * 1.1 Overview
1984  *
1985  * The Framework-to-Provider API is represented by the dtrace_mops structure
1986  * that the meta provider passes to the framework when registering itself as
1987  * a meta provider. This structure consists of the following members:
1988  *
1989  *   dtms_create_probe()	<-- Add a new probe to a created provider
1990  *   dtms_provide_pid()		<-- Create a new provider for a given process
1991  *   dtms_remove_pid()		<-- Remove a previously created provider
1992  *
1993  * 1.2  void dtms_create_probe(void *arg, void *parg,
1994  *           dtrace_helper_probedesc_t *probedesc);
1995  *
1996  * 1.2.1  Overview
1997  *
1998  *   Called by the DTrace framework to create a new probe in a provider
1999  *   created by this meta provider.
2000  *
2001  * 1.2.2  Arguments and notes
2002  *
2003  *   The first argument is the cookie as passed to dtrace_meta_register().
2004  *   The second argument is the provider cookie for the associated provider;
2005  *   this is obtained from the return value of dtms_provide_pid(). The third
2006  *   argument is the helper probe description.
2007  *
2008  * 1.2.3  Return value
2009  *
2010  *   None
2011  *
2012  * 1.2.4  Caller's context
2013  *
2014  *   dtms_create_probe() is called from either ioctl() or module load context.
2015  *   The DTrace framework is locked in such a way that meta providers may not
2016  *   register or unregister. This means that the meta provider cannot call
2017  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context is
2018  *   such that the provider may (and is expected to) call provider-related
2019  *   DTrace provider APIs including dtrace_probe_create().
2020  *
2021  * 1.3  void *dtms_provide_pid(void *arg, dtrace_meta_provider_t *mprov,
2022  *	      pid_t pid)
2023  *
2024  * 1.3.1  Overview
2025  *
2026  *   Called by the DTrace framework to instantiate a new provider given the
2027  *   description of the provider and probes in the mprov argument. The
2028  *   meta provider should call dtrace_register() to insert the new provider
2029  *   into the DTrace framework.
2030  *
2031  * 1.3.2  Arguments and notes
2032  *
2033  *   The first argument is the cookie as passed to dtrace_meta_register().
2034  *   The second argument is a pointer to a structure describing the new
2035  *   helper provider. The third argument is the process identifier for
2036  *   process associated with this new provider. Note that the name of the
2037  *   provider as passed to dtrace_register() should be the contatenation of
2038  *   the dtmpb_provname member of the mprov argument and the processs
2039  *   identifier as a string.
2040  *
2041  * 1.3.3  Return value
2042  *
2043  *   The cookie for the provider that the meta provider creates. This is
2044  *   the same value that it passed to dtrace_register().
2045  *
2046  * 1.3.4  Caller's context
2047  *
2048  *   dtms_provide_pid() is called from either ioctl() or module load context.
2049  *   The DTrace framework is locked in such a way that meta providers may not
2050  *   register or unregister. This means that the meta provider cannot call
2051  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context
2052  *   is such that the provider may -- and is expected to --  call
2053  *   provider-related DTrace provider APIs including dtrace_register().
2054  *
2055  * 1.4  void dtms_remove_pid(void *arg, dtrace_meta_provider_t *mprov,
2056  *	     pid_t pid)
2057  *
2058  * 1.4.1  Overview
2059  *
2060  *   Called by the DTrace framework to remove a provider that had previously
2061  *   been instantiated via the dtms_provide_pid() entry point. The meta
2062  *   provider need not remove the provider immediately, but this entry
2063  *   point indicates that the provider should be removed as soon as possible
2064  *   using the dtrace_unregister() API.
2065  *
2066  * 1.4.2  Arguments and notes
2067  *
2068  *   The first argument is the cookie as passed to dtrace_meta_register().
2069  *   The second argument is a pointer to a structure describing the helper
2070  *   provider. The third argument is the process identifier for process
2071  *   associated with this new provider.
2072  *
2073  * 1.4.3  Return value
2074  *
2075  *   None
2076  *
2077  * 1.4.4  Caller's context
2078  *
2079  *   dtms_remove_pid() is called from either ioctl() or exit() context.
2080  *   The DTrace framework is locked in such a way that meta providers may not
2081  *   register or unregister. This means that the meta provider cannot call
2082  *   dtrace_meta_register() or dtrace_meta_unregister(). However, the context
2083  *   is such that the provider may -- and is expected to -- call
2084  *   provider-related DTrace provider APIs including dtrace_unregister().
2085  */
2086 typedef struct dtrace_helper_probedesc {
2087 	char *dthpb_mod;			/* probe module */
2088 	char *dthpb_func; 			/* probe function */
2089 	char *dthpb_name; 			/* probe name */
2090 	uint64_t dthpb_base;			/* base address */
2091 	uint32_t *dthpb_offs;			/* offsets array */
2092 	uint32_t *dthpb_enoffs;			/* is-enabled offsets array */
2093 	uint32_t dthpb_noffs;			/* offsets count */
2094 	uint32_t dthpb_nenoffs;			/* is-enabled offsets count */
2095 	uint8_t *dthpb_args;			/* argument mapping array */
2096 	uint8_t dthpb_xargc;			/* translated argument count */
2097 	uint8_t dthpb_nargc;			/* native argument count */
2098 	char *dthpb_xtypes;			/* translated types strings */
2099 	char *dthpb_ntypes;			/* native types strings */
2100 } dtrace_helper_probedesc_t;
2101 
2102 typedef struct dtrace_helper_provdesc {
2103 	char *dthpv_provname;			/* provider name */
2104 	dtrace_pattr_t dthpv_pattr;		/* stability attributes */
2105 } dtrace_helper_provdesc_t;
2106 
2107 typedef struct dtrace_mops {
2108 	void (*dtms_create_probe)(void *, void *, dtrace_helper_probedesc_t *);
2109 	void *(*dtms_provide_pid)(void *, dtrace_helper_provdesc_t *, pid_t);
2110 	void (*dtms_remove_pid)(void *, dtrace_helper_provdesc_t *, pid_t);
2111 } dtrace_mops_t;
2112 
2113 typedef uintptr_t	dtrace_meta_provider_id_t;
2114 
2115 extern int dtrace_meta_register(const char *, const dtrace_mops_t *, void *,
2116     dtrace_meta_provider_id_t *);
2117 extern int dtrace_meta_unregister(dtrace_meta_provider_id_t);
2118 
2119 /*
2120  * DTrace Kernel Hooks
2121  *
2122  * The following functions are implemented by the base kernel and form a set of
2123  * hooks used by the DTrace framework.  DTrace hooks are implemented in either
2124  * uts/common/os/dtrace_subr.c, an ISA-specific assembly file, or in a
2125  * uts/<platform>/os/dtrace_subr.c corresponding to each hardware platform.
2126  */
2127 
2128 typedef enum dtrace_vtime_state {
2129 	DTRACE_VTIME_INACTIVE = 0,	/* No DTrace, no TNF */
2130 	DTRACE_VTIME_ACTIVE,		/* DTrace virtual time, no TNF */
2131 	DTRACE_VTIME_INACTIVE_TNF,	/* No DTrace, TNF active */
2132 	DTRACE_VTIME_ACTIVE_TNF		/* DTrace virtual time _and_ TNF */
2133 } dtrace_vtime_state_t;
2134 
2135 extern dtrace_vtime_state_t dtrace_vtime_active;
2136 extern void dtrace_vtime_switch(kthread_t *next);
2137 extern void dtrace_vtime_enable_tnf(void);
2138 extern void dtrace_vtime_disable_tnf(void);
2139 extern void dtrace_vtime_enable(void);
2140 extern void dtrace_vtime_disable(void);
2141 
2142 struct regs;
2143 
2144 extern int (*dtrace_pid_probe_ptr)(struct regs *);
2145 extern int (*dtrace_fasttrap_probe_ptr)(struct regs *);
2146 extern int (*dtrace_return_probe_ptr)(struct regs *);
2147 extern void (*dtrace_fasttrap_fork_ptr)(proc_t *, proc_t *);
2148 extern void (*dtrace_fasttrap_exec_ptr)(proc_t *);
2149 extern void (*dtrace_fasttrap_exit_ptr)(proc_t *);
2150 extern void dtrace_fasttrap_fork(proc_t *, proc_t *);
2151 
2152 typedef uintptr_t dtrace_icookie_t;
2153 typedef void (*dtrace_xcall_t)(void *);
2154 
2155 extern dtrace_icookie_t dtrace_interrupt_disable(void);
2156 extern void dtrace_interrupt_enable(dtrace_icookie_t);
2157 
2158 extern void dtrace_membar_producer(void);
2159 extern void dtrace_membar_consumer(void);
2160 
2161 extern void (*dtrace_cpu_init)(processorid_t);
2162 extern void (*dtrace_modload)(struct modctl *);
2163 extern void (*dtrace_modunload)(struct modctl *);
2164 extern void (*dtrace_helpers_cleanup)();
2165 extern void (*dtrace_helpers_fork)(proc_t *parent, proc_t *child);
2166 extern void (*dtrace_cpustart_init)();
2167 extern void (*dtrace_cpustart_fini)();
2168 
2169 extern void (*dtrace_kreloc_init)();
2170 extern void (*dtrace_kreloc_fini)();
2171 
2172 extern void (*dtrace_debugger_init)();
2173 extern void (*dtrace_debugger_fini)();
2174 extern dtrace_cacheid_t dtrace_predcache_id;
2175 
2176 extern hrtime_t dtrace_gethrtime(void);
2177 extern void dtrace_sync(void);
2178 extern void dtrace_toxic_ranges(void (*)(uintptr_t, uintptr_t));
2179 extern void dtrace_xcall(processorid_t, dtrace_xcall_t, void *);
2180 extern void dtrace_vpanic(const char *, __va_list);
2181 extern void dtrace_panic(const char *, ...);
2182 
2183 extern int dtrace_safe_defer_signal(void);
2184 extern void dtrace_safe_synchronous_signal(void);
2185 
2186 #if defined(__i386) || defined(__amd64)
2187 extern int dtrace_instr_size(uchar_t *instr);
2188 extern int dtrace_instr_size_isa(uchar_t *, model_t, int *);
2189 extern void dtrace_invop_add(int (*)(uintptr_t, uintptr_t *, uintptr_t));
2190 extern void dtrace_invop_remove(int (*)(uintptr_t, uintptr_t *, uintptr_t));
2191 extern void dtrace_invop_callsite(void);
2192 #endif
2193 
2194 #ifdef __sparc
2195 extern int dtrace_blksuword32(uintptr_t, uint32_t *, int);
2196 extern void dtrace_getfsr(uint64_t *);
2197 #endif
2198 
2199 #define	DTRACE_CPUFLAG_ISSET(flag) \
2200 	(cpu_core[CPU->cpu_id].cpuc_dtrace_flags & (flag))
2201 
2202 #define	DTRACE_CPUFLAG_SET(flag) \
2203 	(cpu_core[CPU->cpu_id].cpuc_dtrace_flags |= (flag))
2204 
2205 #define	DTRACE_CPUFLAG_CLEAR(flag) \
2206 	(cpu_core[CPU->cpu_id].cpuc_dtrace_flags &= ~(flag))
2207 
2208 #endif /* _KERNEL */
2209 
2210 #endif	/* _ASM */
2211 
2212 #if defined(__i386) || defined(__amd64)
2213 
2214 #define	DTRACE_INVOP_PUSHL_EBP		1
2215 #define	DTRACE_INVOP_POPL_EBP		2
2216 #define	DTRACE_INVOP_LEAVE		3
2217 #define	DTRACE_INVOP_NOP		4
2218 #define	DTRACE_INVOP_RET		5
2219 
2220 #endif
2221 
2222 #ifdef	__cplusplus
2223 }
2224 #endif
2225 
2226 #endif	/* _SYS_DTRACE_H */
2227