1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SMBSRV_SMB_H 27 #define _SMBSRV_SMB_H 28 29 30 /* 31 * SMB definitions and interfaces, mostly defined in the SMB and CIFS specs. 32 */ 33 #ifdef _KERNEL 34 #include <sys/types.h> 35 #endif 36 #include <smbsrv/string.h> 37 #include <smbsrv/msgbuf.h> 38 39 #include <smbsrv/ntstatus.h> 40 #include <smbsrv/nterror.h> 41 #include <smbsrv/doserror.h> 42 #include <smbsrv/ntaccess.h> 43 44 /* 45 * Macintosh Extensions for CIFS 46 */ 47 #include <smbsrv/mac_cifs.h> 48 49 /* 50 * NT Installable File System (IFS) interface. 51 */ 52 #include <smbsrv/ntifs.h> 53 54 #ifdef __cplusplus 55 extern "C" { 56 #endif 57 58 /* 59 * The msgbuf format and length of an SMB header. 60 */ 61 #define SMB_HEADER_DOS_FMT "Mbbbwbww10.wwww" 62 #define SMB_HEADER_NT_FMT "Mblbww#c2.wwww" 63 #define SMB_HEADER_LEN 32 64 #define SMB_SIG_SIZE 8 /* SMB signature size */ 65 66 #define SMB_HEADER_ED_FMT "Mbbbwbww8c2.wwww" 67 #define SMB_HEADER_ED_LEN (4+1+1+1+2+1+2+12+2+2+2+2) 68 #define SMB_TRANSHDR_ED_FMT "wwwwb.wl2.wwwwb." 69 #define SMB_TRANSHDR_ED_LEN (2+2+2+2+1+1+2+4+2+2+2+2+2+1+1) 70 #define SMB_TRANSSHDR_ED_FMT "wwwwwwwww" 71 #define SMB_TRANSSHDR_ED_LEN (2+2+2+2+2+2+2+2) 72 #define SMB_TRANS2SHDR_ED_FMT "wwwwwwwww" 73 #define SMB_TRANS2SHDR_ED_LEN (2+2+2+2+2+2+2+2+2) 74 /* There is something wrong with this. Should be 38 bytes. It is 37 bytes */ 75 #define SMB_NT_TRANSHDR_ED_FMT "b2.llllllllbw" 76 #define SMB_NT_TRANSHDR_ED_LEN (1+2+4+4+4+4+4+4+4+4+1+2) 77 78 /* 79 * CIFS definition for the SMB header (CIFS Section 3.2). Note that the 80 * pid_high field is not documented in the 1997 CIFS specificaction. This 81 * is a decoded or memory-based definition, which may be padded to align 82 * its elements on word boundaries. See smb_hdrbuf_t for the network 83 * ready structure. 84 */ 85 typedef struct smb_hdr { 86 uint8_t protocol[4]; 87 uint8_t command; 88 89 union { 90 struct { 91 uint8_t error_class; 92 uint8_t reserved; 93 uint16_t error; 94 } dos_error; 95 uint32_t ntstatus; 96 } status; 97 98 uint8_t flags; 99 uint16_t flags2; 100 uint16_t pid_high; 101 102 union { 103 uint16_t pad[5]; 104 struct { 105 uint16_t reserved; 106 uint8_t security_sig[SMB_SIG_SIZE]; 107 } extra; 108 } extra; 109 110 uint16_t tid; 111 uint16_t pid; 112 uint16_t uid; 113 uint16_t mid; 114 } smb_hdr_t; 115 116 /* 117 * Encoded or packed SMB header in network ready format. 118 */ 119 typedef struct smb_hdrbuf { 120 uint8_t hdr[SMB_HEADER_LEN]; 121 } smb_hdrbuf_t; 122 123 /* 124 * Protocol magic value as a 32-bit. This will be 0xff 0x53 0x4d 0x42 on 125 * the wire. 126 */ 127 128 #define SMB_PROTOCOL_MAGIC 0x424d53ff 129 130 /* 131 * Time and date encoding (CIFS Section 3.6). The date is encoded such 132 * that the year has a range of 0-119, which represents 1980-2099. The 133 * month range is 1-12, and the day range is 1-31. 134 */ 135 typedef struct smb_date { 136 uint16_t day : 5; 137 uint16_t month : 4; 138 uint16_t year : 7; 139 } smb_date_t; 140 141 /* 142 * The hours range is 0-23, the minutes range is 0-59 and the two_sec 143 * range is 0-29. 144 */ 145 typedef struct smb_time { 146 uint16_t two_sec : 5; 147 uint16_t minutes : 6; 148 uint16_t hours : 5; 149 } smb_time_t; 150 151 /* 152 * This is a 64-bit signed absolute time representing 100ns increments. 153 * A positive value represents the absolute time since 1601AD. A 154 * negative value represents a context specific relative time. 155 */ 156 typedef struct smb_time2 { 157 uint32_t low_time; 158 int32_t high_time; 159 } smb_time2_t; 160 161 /* 162 * The number of seconds since Jan 1, 1970, 00:00:00.0. 163 */ 164 typedef uint32_t smb_utime_t; 165 166 #define SMB_LM_NEGOTIATE_WORDCNT 13 167 #define SMB_NT_NEGOTIATE_WORDCNT 17 168 169 #define SMB_NAME83_EXTLEN 3 170 #define SMB_NAME83_BASELEN 8 171 #define SMB_NAME83_LEN 12 172 173 /* Share types */ 174 #ifndef _SHARE_TYPES_DEFINED_ 175 #define _SHARE_TYPES_DEFINED_ 176 #define STYPE_DISKTREE 0x00000000 177 #define STYPE_PRINTQ 0x00000001 178 #define STYPE_DEVICE 0x00000002 179 #define STYPE_IPC 0x00000003 180 #define STYPE_MASK 0x0000000F 181 #define STYPE_DFS 0x00000064 182 #define STYPE_HIDDEN 0x80000000 183 #define STYPE_SPECIAL 0x80000000 184 #endif /* _SHARE_TYPES_DEFINED_ */ 185 186 #define STYPE_ISDSK(S) (((S) & STYPE_MASK) == STYPE_DISKTREE) 187 #define STYPE_ISPRN(S) (((S) & STYPE_MASK) == STYPE_PRINTQ) 188 #define STYPE_ISDEV(S) (((S) & STYPE_MASK) == STYPE_DEVICE) 189 #define STYPE_ISIPC(S) (((S) & STYPE_MASK) == STYPE_IPC) 190 191 /* 192 * NtCreateAndX and NtTransactCreate creation flags: defined in CIFS 193 * section 4.2.2 194 * 195 * Creation Flag Name Value Description 196 * ========================== ====== ================================== 197 * NT_CREATE_REQUEST_OPLOCK 0x02 Level I oplock requested 198 * NT_CREATE_REQUEST_OPBATCH 0x04 Batch oplock requested 199 * NT_CREATE_OPEN_TARGET_DIR 0x08 Target for open is a directory 200 */ 201 #define NT_CREATE_FLAG_REQUEST_OPLOCK 0x02 202 #define NT_CREATE_FLAG_REQUEST_OPBATCH 0x04 203 #define NT_CREATE_FLAG_OPEN_TARGET_DIR 0x08 204 205 206 /* 207 * Define the filter flags for NtNotifyChangeDirectoryFile 208 */ 209 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001 210 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002 211 #define FILE_NOTIFY_CHANGE_NAME 0x00000003 212 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004 213 #define FILE_NOTIFY_CHANGE_SIZE 0x00000008 214 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010 215 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020 216 #define FILE_NOTIFY_CHANGE_CREATION 0x00000040 217 #define FILE_NOTIFY_CHANGE_EA 0x00000080 218 #define FILE_NOTIFY_CHANGE_SECURITY 0x00000100 219 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200 220 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400 221 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800 222 #define FILE_NOTIFY_VALID_MASK 0x00000fff 223 224 225 /* 226 * Define the file action type codes for NtNotifyChangeDirectoryFile 227 */ 228 #define FILE_ACTION_ADDED 0x00000001 229 #define FILE_ACTION_REMOVED 0x00000002 230 #define FILE_ACTION_MODIFIED 0x00000003 231 #define FILE_ACTION_RENAMED_OLD_NAME 0x00000004 232 #define FILE_ACTION_RENAMED_NEW_NAME 0x00000005 233 #define FILE_ACTION_ADDED_STREAM 0x00000006 234 #define FILE_ACTION_REMOVED_STREAM 0x00000007 235 #define FILE_ACTION_MODIFIED_STREAM 0x00000008 236 237 238 /* Lock type flags */ 239 #define LOCKING_ANDX_NORMAL_LOCK 0x00 240 #define LOCKING_ANDX_SHARED_LOCK 0x01 241 #define LOCKING_ANDX_OPLOCK_RELEASE 0x02 242 #define LOCKING_ANDX_CHANGE_LOCK_TYPE 0x04 243 #define LOCKING_ANDX_CANCEL_LOCK 0x08 244 #define LOCKING_ANDX_LARGE_FILES 0x10 245 246 #define SMB_COM_CREATE_DIRECTORY 0x00 247 #define SMB_COM_DELETE_DIRECTORY 0x01 248 #define SMB_COM_OPEN 0x02 249 #define SMB_COM_CREATE 0x03 250 #define SMB_COM_CLOSE 0x04 251 #define SMB_COM_FLUSH 0x05 252 #define SMB_COM_DELETE 0x06 253 #define SMB_COM_RENAME 0x07 254 #define SMB_COM_QUERY_INFORMATION 0x08 255 #define SMB_COM_SET_INFORMATION 0x09 256 #define SMB_COM_READ 0x0A 257 #define SMB_COM_WRITE 0x0B 258 #define SMB_COM_LOCK_BYTE_RANGE 0x0C 259 #define SMB_COM_UNLOCK_BYTE_RANGE 0x0D 260 #define SMB_COM_CREATE_TEMPORARY 0x0E 261 #define SMB_COM_CREATE_NEW 0x0F 262 #define SMB_COM_CHECK_DIRECTORY 0x10 263 #define SMB_COM_PROCESS_EXIT 0x11 264 #define SMB_COM_SEEK 0x12 265 #define SMB_COM_LOCK_AND_READ 0x13 266 #define SMB_COM_WRITE_AND_UNLOCK 0x14 267 268 #define SMB_COM_READ_RAW 0x1A 269 #define SMB_COM_READ_MPX 0x1B 270 #define SMB_COM_READ_MPX_SECONDARY 0x1C 271 #define SMB_COM_WRITE_RAW 0x1D 272 #define SMB_COM_WRITE_MPX 0x1E 273 #define SMB_COM_WRITE_MPX_SECONDARY 0x1F 274 #define SMB_COM_WRITE_COMPLETE 0x20 275 276 #define SMB_COM_SET_INFORMATION2 0x22 277 #define SMB_COM_QUERY_INFORMATION2 0x23 278 #define SMB_COM_LOCKING_ANDX 0x24 279 #define SMB_COM_TRANSACTION 0x25 280 #define SMB_COM_TRANSACTION_SECONDARY 0x26 281 #define SMB_COM_IOCTL 0x27 282 #define SMB_COM_IOCTL_SECONDARY 0x28 283 #define SMB_COM_COPY 0x29 284 #define SMB_COM_MOVE 0x2A 285 #define SMB_COM_ECHO 0x2B 286 #define SMB_COM_WRITE_AND_CLOSE 0x2C 287 #define SMB_COM_OPEN_ANDX 0x2D 288 #define SMB_COM_READ_ANDX 0x2E 289 #define SMB_COM_WRITE_ANDX 0x2F 290 291 #define SMB_COM_CLOSE_AND_TREE_DISC 0x31 292 #define SMB_COM_TRANSACTION2 0x32 293 #define SMB_COM_TRANSACTION2_SECONDARY 0x33 294 #define SMB_COM_FIND_CLOSE2 0x34 295 #define SMB_COM_FIND_NOTIFY_CLOSE 0x35 296 297 #define SMB_COM_TREE_CONNECT 0x70 298 #define SMB_COM_TREE_DISCONNECT 0x71 299 #define SMB_COM_NEGOTIATE 0x72 300 #define SMB_COM_SESSION_SETUP_ANDX 0x73 301 #define SMB_COM_LOGOFF_ANDX 0x74 302 #define SMB_COM_TREE_CONNECT_ANDX 0x75 303 304 #define SMB_COM_QUERY_INFORMATION_DISK 0x80 305 #define SMB_COM_SEARCH 0x81 306 #define SMB_COM_FIND 0x82 307 #define SMB_COM_FIND_UNIQUE 0x83 308 #define SMB_COM_FIND_CLOSE 0x84 309 310 #define SMB_COM_NT_TRANSACT 0xA0 311 #define SMB_COM_NT_TRANSACT_SECONDARY 0xA1 312 #define SMB_COM_NT_CREATE_ANDX 0xA2 313 #define SMB_COM_NT_CANCEL 0xA4 314 315 #define SMB_COM_OPEN_PRINT_FILE 0xC0 316 #define SMB_COM_WRITE_PRINT_FILE 0xC1 317 #define SMB_COM_CLOSE_PRINT_FILE 0xC2 318 #define SMB_COM_GET_PRINT_QUEUE 0xC3 319 320 321 /* 322 * Flags field of the SMB header. The names in parenthesis represent 323 * alternative names for the flags. 324 * 325 * SMB_FLAGS_LOCK_AND_READ_OK If the server supports LockAndRead and 326 * (SMB_FLAGS_LOCKS_SUBDIALECT) WriteAndUnlock, it sets this bit in the 327 * Negotiate response. 328 * 329 * SMB_FLAGS_SEND_NO_ACK When on, the client guarantees that there 330 * (SMB_FLAGS_RCV_BUF_POSTED) is a receive buffer posted such that a 331 * "Send-No-Ack" can be used by the server 332 * to respond to the client's request. 333 * 334 * SMB_FLAGS_CASE_INSENSITIVE This is part of the Flags field of every 335 * SMB header. If this bit is set, then all 336 * pathnames in the SMB should be treated as 337 * case-insensitive. Otherwise pathnames are 338 * case-sensitive. 339 * 340 * SMB_FLAGS_CANONICALIZED_PATHS When on in SessionSetupX, this indicates 341 * that all paths sent to the server are 342 * already in OS/2 canonicalized format. 343 * 344 * OS/2 canonical format means that file/directory names are in upper case, 345 * are valid characters, . and .. have been removed and single backslashes 346 * are used as separators. 347 * 348 * SMB_FLAGS_OPLOCK When set in an open file request SMBs 349 * (Open, Create, OpenX, etc.) this bit 350 * indicates a request for an oplock on the 351 * file. When set in the response, this bit 352 * indicates that the oplock was granted. 353 * 354 * SMB_FLAGS_OPLOCK_NOTIFY_ANY When on, this bit indicates that the server 355 * should notify the client on any request 356 * that could cause the file to be changed. 357 * If not set, the server only notifies the 358 * client on other open requests on the file. 359 * This bit is only relevant when 360 * SMB_FLAGS_OPLOCK is set. 361 * 362 * SMB_FLAGS_SERVER_TO_REDIR This bit indicates that the SMB is being 363 * (SMB_FLAGS_REPLY) sent from server to (client) redirector. 364 */ 365 #define SMB_FLAGS_LOCK_AND_READ_OK 0x01 366 #define SMB_FLAGS_SEND_NO_ACK 0x02 367 #define SMB_FLAGS_RESERVED 0x04 368 #define SMB_FLAGS_CASE_INSENSITIVE 0x08 369 #define SMB_FLAGS_CANONICALIZED_PATHS 0x10 370 #define SMB_FLAGS_OPLOCK 0x20 371 #define SMB_FLAGS_OPLOCK_NOTIFY_ANY 0x40 372 #define SMB_FLAGS_REPLY 0x80 373 374 375 /* 376 * Flags2 field of the SMB header. 377 * 378 * SMB_FLAGS2_READ_IF_EXECUTE is also known as SMB_FLAGS2_PAGING_IO 379 */ 380 #define SMB_FLAGS2_KNOWS_LONG_NAMES 0x0001 381 #define SMB_FLAGS2_KNOWS_EAS 0x0002 382 #define SMB_FLAGS2_SMB_SECURITY_SIGNATURE 0x0004 383 #define SMB_FLAGS2_IS_LONG_NAME 0x0040 384 #define SMB_FLAGS2_REPARSE_PATH 0x0400 385 #define SMB_FLAGS2_EXT_SEC 0x0800 386 #define SMB_FLAGS2_DFS 0x1000 387 #define SMB_FLAGS2_READ_IF_EXECUTE 0x2000 388 #define SMB_FLAGS2_NT_STATUS 0x4000 389 #define SMB_FLAGS2_UNICODE 0x8000 390 391 #define DIALECT_UNKNOWN 0 392 #define PC_NETWORK_PROGRAM_1_0 1 /* The original MSNET SMB protocol */ 393 #define PCLAN1_0 2 /* Some versions of the original MSNET */ 394 #define MICROSOFT_NETWORKS_1_03 3 /* This is used for the MS-NET 1.03 */ 395 #define MICROSOFT_NETWORKS_3_0 4 /* This is the DOS LANMAN 1.0 specific */ 396 #define LANMAN1_0 5 /* This is the first version of the full */ 397 #define LM1_2X002 6 /* This is the first version of the full */ 398 #define DOS_LM1_2X002 7 /* This is the dos equivalent of the */ 399 #define DOS_LANMAN2_1 8 /* DOS LANMAN2.1 */ 400 #define LANMAN2_1 9 /* OS/2 LANMAN2.1 */ 401 #define Windows_for_Workgroups_3_1a 10 /* Windows for Workgroups Version 1.0 */ 402 #define NT_LM_0_12 11 /* The SMB protocol designed for NT */ 403 404 /* 405 * SMB_TREE_CONNECT_ANDX OptionalSupport flags 406 * 407 * SMB_SUPPORT_SEARCH_BITS The server supports SearchAttributes. 408 * SMB_SHARE_IS_IN_DFS The share is managed by DFS. 409 * SMB_CSC_MASK Offline-caching mask - see CSC values. 410 * SMB_UNIQUE_FILE_NAME The server uses long names and does not support 411 * short names. This indicates to clients that 412 * they may perform directory name-space caching. 413 * SMB_EXTENDED_SIGNATURES The server will use signing key protection. 414 * 415 * SMB_CSC_CACHE_MANUAL_REINT Clients are allowed to cache files for offline 416 * use as requested by users but automatic 417 * file-by-file reintegration is not allowed. 418 * SMB_CSC_CACHE_AUTO_REINT Clients are allowed to automatically cache 419 * files for offline use and file-by-file 420 * reintegration is allowed. 421 * SMB_CSC_CACHE_VDO Clients are allowed to automatically cache files 422 * for offline use, file-by-file reintegration is 423 * allowed and clients are permitted to work from 424 * their local cache even while offline. 425 * SMB_CSC_CACHE_NONE Client-side caching is disabled for this share. 426 * 427 * SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 428 * The server will filter directory entries based 429 * on the access permissions of the client. 430 */ 431 #define SMB_SUPPORT_SEARCH_BITS 0x0001 432 #define SMB_SHARE_IS_IN_DFS 0x0002 433 #define SMB_CSC_MASK 0x000C 434 #define SMB_UNIQUE_FILE_NAME 0x0010 435 #define SMB_EXTENDED_SIGNATURES 0x0020 436 437 #define SMB_CSC_CACHE_MANUAL_REINT 0x0000 438 #define SMB_CSC_CACHE_AUTO_REINT 0x0004 439 #define SMB_CSC_CACHE_VDO 0x0008 440 #define SMB_CSC_CACHE_NONE 0x000C 441 442 #define SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 0x0800 443 444 /* 445 * The subcommand codes, placed in SETUP[0], for named pipe operations are: 446 * SubCommand Code Value Description 447 * =================== ===== ========================================= 448 */ 449 450 #define CallNamedPipe 0x54 /* open/write/read/close pipe */ 451 #define WaitNamedPipe 0x53 /* wait for pipe to be nonbusy */ 452 #define PeekNmPipe 0x23 /* read but don't remove data */ 453 #define QNmPHandState 0x21 /* query pipe handle modes */ 454 #define SetNmPHandState 0x01 /* set pipe handle modes */ 455 #define QNmPipeInfo 0x22 /* query pipe attributes */ 456 #define TransactNmPipe 0x26 /* write/read operation on pipe */ 457 #define RawReadNmPipe 0x11 /* read pipe in "raw" (non message mode) */ 458 #define RawWriteNmPipe 0x31 /* write pipe "raw" (non message mode) */ 459 460 461 462 /* 463 * Setup[0] Transaction2 Value Description 464 * Subcommand Code 465 * ========================== ===== ============================= 466 */ 467 468 #define TRANS2_OPEN2 0x00 /* Create file, extended attributes */ 469 #define TRANS2_FIND_FIRST2 0x01 /* Begin search for files */ 470 #define TRANS2_FIND_NEXT2 0x02 /* Resume search for files */ 471 #define TRANS2_QUERY_FS_INFORMATION 0x03 /* Get file system information */ 472 #define TRANS2_SET_FS_INFORMATION 0x04 /* Set file system info. */ 473 #define TRANS2_QUERY_PATH_INFORMATION 0x05 /* Get info, named file or dir */ 474 #define TRANS2_SET_PATH_INFORMATION 0x06 /* Set info, named file or dir */ 475 #define TRANS2_QUERY_FILE_INFORMATION 0x07 /* Get info, handle */ 476 #define TRANS2_SET_FILE_INFORMATION 0x08 /* Set info, handle */ 477 #define TRANS2_FSCTL 0x09 /* Not implemented by NT server */ 478 #define TRANS2_IOCTL2 0x0A /* Not implemented by NT server */ 479 #define TRANS2_FIND_NOTIFY_FIRST 0x0B /* Not implemented by NT server */ 480 #define TRANS2_FIND_NOTIFY_NEXT 0x0C /* Not implemented by NT server */ 481 #define TRANS2_CREATE_DIRECTORY 0x0D /* Create dir, extended attributes */ 482 #define TRANS2_SESSION_SETUP 0x0E /* Session setup, extended security */ 483 #define TRANS2_GET_DFS_REFERRAL 0x10 /* Get a Dfs referral */ 484 #define TRANS2_REPORT_DFS_INCONSISTENCY 0x11 /* Report a Dfs inconsistency */ 485 486 /* 487 * Access Mode Encoding (CIFS/1.0 1996 Section 3.8). 488 * 489 * The desired access mode passed in SmbOpen and SmbOpenAndX has the following 490 * mapping: 491 * 492 * 1111 11 493 * 5432 1098 7654 3210 494 * rWrC rLLL rSSS rAAA 495 * 496 * where: 497 * 498 * W - Write through mode. No read ahead or write behind allowed on 499 * this file or device. When protocol is returned, data is expected 500 * to be on the disk or device. 501 * 502 * S - Sharing mode: 503 * 0 - Compatibility mode (as in core open) 504 * 1 - Deny read/write/execute (exclusive) 505 * 2 - Deny write 506 * 3 - Deny read/execute 507 * 4 - Deny none 508 * 509 * A - Access mode 510 * 0 - Open for reading 511 * 1 - Open for writing 512 * 2 - Open for reading and writing 513 * 3 - Open for execute 514 * 515 * rSSSrAAA = 11111111 (hex FF) indicates FCB open (as in core protocol) 516 * 517 * C - Cache mode 518 * 0 - Normal file 519 * 1 - Do not cache this file 520 * 521 * L - Locality of reference 522 * 0 - Locality of reference is unknown 523 * 1 - Mainly sequential access 524 * 2 - Mainly random access 525 * 3 - Random access with some locality 526 * 4 to 7 - Currently undefined 527 */ 528 529 530 #define SMB_DA_SHARE_MASK 0x70 531 #define SMB_DA_ACCESS_MASK 0x07 532 #define SMB_DA_FCB_MASK (UCHAR)0xFF 533 534 #define SMB_DA_ACCESS_READ 0x00 535 #define SMB_DA_ACCESS_WRITE 0x01 536 #define SMB_DA_ACCESS_READ_WRITE 0x02 537 #define SMB_DA_ACCESS_EXECUTE 0x03 538 539 #define SMB_DA_SHARE_COMPATIBILITY 0x00 540 #define SMB_DA_SHARE_EXCLUSIVE 0x10 541 #define SMB_DA_SHARE_DENY_WRITE 0x20 542 #define SMB_DA_SHARE_DENY_READ 0x30 543 #define SMB_DA_SHARE_DENY_NONE 0x40 544 545 #define SMB_DA_FCB (UCHAR)0xFF 546 547 #define SMB_CACHE_NORMAL 0x0000 548 #define SMB_DO_NOT_CACHE 0x1000 549 550 #define SMB_LR_UNKNOWN 0x0000 551 #define SMB_LR_SEQUENTIAL 0x0100 552 #define SMB_LR_RANDOM 0x0200 553 #define SMB_LR_RANDOM_WITH_LOCALITY 0x0300 554 #define SMB_LR_MASK 0x0F00 555 556 #define SMB_DA_WRITE_THROUGH 0x4000 557 558 /* 559 * Macros used for share reservation rule checking 560 */ 561 562 #define SMB_DENY_READ(share_access) ((share_access & FILE_SHARE_READ) == 0) 563 564 #define SMB_DENY_WRITE(share_access) ((share_access & FILE_SHARE_WRITE) == 0) 565 566 #define SMB_DENY_DELETE(share_access) ((share_access & FILE_SHARE_DELETE) == 0) 567 568 #define SMB_DENY_RW(share_access) \ 569 ((share_access & (FILE_SHARE_READ | FILE_SHARE_WRITE)) == 0) 570 571 #define SMB_DENY_ALL(share_access) (share_access == 0) 572 573 #define SMB_DENY_NONE(share_access) (share_access == FILE_SHARE_ALL) 574 575 /* 576 * The SMB open function determines what action should be taken depending 577 * on the existence or lack thereof of files used in the operation. It 578 * has the following mapping: 579 * 580 * 1111 1 581 * 5432 1098 7654 3210 582 * rrrr rrrr rrrC rrOO 583 * 584 * where: 585 * 586 * O - Open (action to be taken if the target file exists) 587 * 0 - Fail 588 * 1 - Open or Append file 589 * 2 - Truncate file 590 * 591 * C - Create (action to be taken if the target file does not exist) 592 * 0 - Fail 593 * 1 - Create file 594 */ 595 596 #define SMB_OFUN_OPEN_MASK 0x3 597 #define SMB_OFUN_CREATE_MASK 0x10 598 599 #define SMB_OFUN_OPEN_FAIL 0 600 #define SMB_OFUN_OPEN_APPEND 1 601 #define SMB_OFUN_OPEN_OPEN 1 602 #define SMB_OFUN_OPEN_TRUNCATE 2 603 604 #define SMB_OFUN_CREATE_FAIL 0x00 605 #define SMB_OFUN_CREATE_CREATE 0x10 606 607 /* 608 * The Action field of OpenAndX has the following format: 609 * 610 * 1111 11 611 * 5432 1098 7654 3210 612 * Lrrr rrrr rrrr rrOO 613 * 614 * where: 615 * 616 * L - Opportunistic lock. 1 if lock granted, else 0. 617 * 618 * O - Open action: 619 * 1 - The file existed and was opened 620 * 2 - The file did not exist but was created 621 * 3 - The file existed and was truncated 622 */ 623 624 #define SMB_OACT_LOCK 0x8000 625 #define SMB_OACT_OPENED 0x01 626 #define SMB_OACT_CREATED 0x02 627 #define SMB_OACT_TRUNCATED 0x03 628 629 #define SMB_OACT_OPLOCK 0x8000 630 631 #define SMB_FTYPE_DISK 0 632 #define SMB_FTYPE_BYTE_PIPE 1 633 #define SMB_FTYPE_MESG_PIPE 2 634 #define SMB_FTYPE_PRINTER 3 635 #define SMB_FTYPE_UNKNOWN 0xFFFF 636 637 #define SMB_DEVST_BLOCKING 0x8000 638 #define SMB_DEVST_ENDPOINT 0x4000 639 #define SMB_DEVST_TYPE_MASK 0x0C00 640 #define SMB_DEVST_TYPE_BYTE_PIPE 0x0000 641 #define SMB_DEVST_TYPE_MESG_PIPE 0x0400 642 #define SMB_DEVST_RMODE_MASK 0x0300 643 #define SMB_DEVST_RMODE_BYTES 0x0000 644 #define SMB_DEVST_RMODE_MESGS 0x0100 645 #define SMB_DEVST_ICOUNT_MASK 0x00FF /* not used */ 646 647 #define SMB_FTYPE_IS_DISK(F) ((F) == SMB_FTYPE_DISK) 648 #define SMB_FTYPE_IS_PIPE(F) \ 649 (((F) == SMB_FTYPE_BYTE_PIPE) || ((F) == SMB_FTYPE_MESG_PIPE)) 650 #define SMB_FTYPE_IS_PRINTER(F) ((F) == SMB_FTYPE_PRINTER) 651 652 /* 653 * TRANS2_FIND 654 */ 655 #define SMB_FIND_FILE_DIRECTORY_INFO 0x101 656 #define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102 657 #define SMB_FIND_FILE_NAMES_INFO 0x103 658 #define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104 659 #define SMB_FIND_FILE_ID_FULL_DIRECTORY_INFO 0x105 660 #define SMB_FIND_FILE_ID_BOTH_DIRECTORY_INFO 0x106 661 #define SMB_MAC_FIND_BOTH_HFS_INFO MAC_FIND_BOTH_HFS_INFO 662 663 664 /* 665 * Flags for TRANS2_FIND_FIRST2 and TRANS2_FIND_NEXT2 (NTDDK). 666 * 667 * If SMB_FIND_RETURN_RESUME_KEYS was set in the request parameters, 668 * each entry is preceded by a four-byte resume key. 669 */ 670 #define SMB_FIND_CLOSE_AFTER_REQUEST 0x01 671 #define SMB_FIND_CLOSE_AT_EOS 0x02 672 #define SMB_FIND_RETURN_RESUME_KEYS 0x04 673 #define SMB_FIND_CONTINUE_FROM_LAST 0x08 674 #define SMB_FIND_WITH_BACKUP_INTENT 0x10 675 676 677 /* 678 * TRANS2_QUERY_FS_INFORMATION 679 * 680 * SMB_QUERY_FS_QUOTA_INFO, SMB_QUERY_FS_CONTROL_INFO are not used in Windows 681 * NT, and are not used in any post NT Windows operating systems. If a server 682 * receives these information levels from a client, it should handle them as 683 * invalid information levels. 684 */ 685 #define SMB_INFO_ALLOCATION 1 686 #define SMB_INFO_VOLUME 2 687 #define SMB_QUERY_FS_LABEL_INFO 0x101 688 #define SMB_QUERY_FS_VOLUME_INFO 0x102 689 #define SMB_QUERY_FS_SIZE_INFO 0x103 690 #define SMB_QUERY_FS_DEVICE_INFO 0x104 691 #define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105 692 #define SMB_QUERY_FS_QUOTA_INFO 0x106 693 #define SMB_QUERY_FS_CONTROL_INFO 0x107 694 695 #define SMB_MAC_QUERY_FS_INFO MAC_QUERY_FS_INFO 696 697 /* 698 * Internal use only. 699 * Define information levels to represent the following requests: 700 * smb_query_information 701 * smb_query_information2 702 * smb_set_information 703 * smb_set_information2 704 */ 705 #define SMB_QUERY_INFORMATION 0x3001 706 #define SMB_QUERY_INFORMATION2 0x3002 707 #define SMB_SET_INFORMATION 0x3001 708 #define SMB_SET_INFORMATION2 0x3002 709 710 /* TRANS2_QUERY_{PATH,FILE}_INFORMATION */ 711 #define SMB_INFO_STANDARD 1 /* query, set */ 712 #define SMB_INFO_QUERY_EA_SIZE 2 /* query */ 713 #define SMB_INFO_SET_EAS 2 /* set */ 714 #define SMB_INFO_QUERY_EAS_FROM_LIST 3 /* query */ 715 #define SMB_INFO_QUERY_ALL_EAS 4 /* query */ 716 #define SMB_INFO_QUERY_FULL_NAME 5 /* unused */ 717 #define SMB_INFO_IS_NAME_VALID 6 /* query */ 718 719 #define SMB_QUERY_FILE_BASIC_INFO 0x101 720 #define SMB_QUERY_FILE_STANDARD_INFO 0x102 721 #define SMB_QUERY_FILE_EA_INFO 0x103 722 #define SMB_QUERY_FILE_NAME_INFO 0x104 723 #define SMB_QUERY_FILE_ALLOCATION_INFO 0x105 /* unused */ 724 #define SMB_QUERY_FILE_END_OF_FILE_INFO 0x106 /* unused */ 725 #define SMB_QUERY_FILE_ALL_INFO 0x107 726 #define SMB_QUERY_FILE_ALT_NAME_INFO 0x108 727 #define SMB_QUERY_FILE_STREAM_INFO 0x109 728 #define SMB_QUERY_FILE_COMPRESSION_INFO 0x10B 729 730 #define SMB_MAC_SET_FINDER_INFO MAC_SET_FINDER_INFO 731 #define SMB_MAC_DT_ADD_APPL MAC_DT_ADD_APPL 732 #define SMB_MAC_DT_REMOVE_APPL MAC_DT_REMOVE_APPL 733 #define SMB_MAC_DT_GET_APPL MAC_DT_GET_APPL 734 #define SMB_MAC_DT_GET_ICON MAC_DT_GET_ICON 735 #define SMB_MAC_DT_GET_ICON_INFO MAC_DT_GET_ICON_INFO 736 #define SMB_MAC_DT_ADD_ICON MAC_DT_ADD_ICON 737 738 #define SMB_SET_FILE_BASIC_INFO 0x101 739 #define SMB_SET_FILE_DISPOSITION_INFO 0x102 740 #define SMB_SET_FILE_ALLOCATION_INFO 0x103 741 #define SMB_SET_FILE_END_OF_FILE_INFO 0x104 742 743 744 /* NT passthrough levels - see ntifs.h FILE_INFORMATION_CLASS */ 745 #define SMB_FILE_BASIC_INFORMATION 1004 746 #define SMB_FILE_STANDARD_INFORMATION 1005 747 #define SMB_FILE_INTERNAL_INFORMATION 1006 748 #define SMB_FILE_EA_INFORMATION 1007 749 #define SMB_FILE_ACCESS_INFORMATION 1008 750 #define SMB_FILE_NAME_INFORMATION 1009 751 #define SMB_FILE_RENAME_INFORMATION 1010 752 #define SMB_FILE_LINK_INFORMATION 1011 753 #define SMB_FILE_DISPOSITION_INFORMATION 1013 754 #define SMB_FILE_ALL_INFORMATION 1018 755 #define SMB_FILE_ALLOCATION_INFORMATION 1019 756 #define SMB_FILE_END_OF_FILE_INFORMATION 1020 757 #define SMB_FILE_ALT_NAME_INFORMATION 1021 758 #define SMB_FILE_STREAM_INFORMATION 1022 759 #define SMB_FILE_COMPRESSION_INFORMATION 1028 760 #define SMB_FILE_NETWORK_OPEN_INFORMATION 1034 761 #define SMB_FILE_ATTR_TAG_INFORMATION 1035 762 763 /* NT passthrough levels - see ntifs.h FILE_FS_INFORMATION_CLASS */ 764 #define SMB_FILE_FS_VOLUME_INFORMATION 1001 765 #define SMB_FILE_FS_LABEL_INFORMATION 1002 766 #define SMB_FILE_FS_SIZE_INFORMATION 1003 767 #define SMB_FILE_FS_DEVICE_INFORMATION 1004 768 #define SMB_FILE_FS_ATTRIBUTE_INFORMATION 1005 769 #define SMB_FILE_FS_CONTROL_INFORMATION 1006 770 #define SMB_FILE_FS_FULLSIZE_INFORMATION 1007 771 #define SMB_FILE_FS_OBJECTID_INFORMATION 1008 772 #define SMB_FILE_FS_DRIVERPATH_INFORMATION 1009 773 774 /* 775 * The following bits may be set in the SecurityMode field of the 776 * SMB_COM_NEGOTIATE response. 777 * 778 * Notes: 779 * NEGOTIATE_SECURITY_SHARE_LEVEL is a montana2 invention. 780 * 781 * The NTDDK definitions are: 782 * #define NEGOTIATE_USER_SECURITY 0x01 783 * #define NEGOTIATE_ENCRYPT_PASSWORDS 0x02 784 * #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 785 * #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 786 */ 787 #define NEGOTIATE_SECURITY_SHARE_LEVEL 0x00 788 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01 789 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02 790 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 791 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 792 793 794 /* 795 * Negotiated Capabilities (CIFS/1.0 section 4.1.1) 796 * 797 * Capabilities allow the server to tell the client what it supports. 798 * Undefined bits MUST be set to zero by servers, and MUST be ignored 799 * by clients. The bit definitions are: 800 * 801 * Capability Name Encoding Meaning 802 * ==================== ======== ================================== 803 * CAP_RAW_MODE 0x0001 The server supports SMB_COM_READ_RAW and 804 * SMB_COM_WRITE_RAW (obsolescent) 805 * CAP_MPX_MODE 0x0002 The server supports SMB_COM_READ_MPX and 806 * SMB_COM_WRITE_MPX (obsolescent) 807 * CAP_UNICODE 0x0004 The server supports Unicode strings 808 * CAP_LARGE_FILES 0x0008 The server supports large files with 64 809 * bit offsets 810 * CAP_NT_SMBS 0x0010 The server supports the SMBs particular 811 * to the NT LM 0.12 dialect. 812 * Implies CAP_NT_FIND. 813 * CAP_RPC_REMOTE_APIS 0x0020 The server supports remote admin API 814 * requests via DCE RPC 815 * CAP_STATUS32 0x0040 The server can respond with 32 bit 816 * status codes in Status.Status 817 * CAP_LEVEL_II_OPLOCKS 0x0080 The server supports level 2 oplocks 818 * CAP_LOCK_AND_READ 0x0100 The server supports the 819 * SMB_COM_LOCK_AND_READ SMB 820 * CAP_NT_FIND 0x0200 821 * CAP_BULK_TRANSFER 0x0400 822 * CAP_COMPRESSED_BULK 0x0800 823 * CAP_DFS 0x1000 The server is DFS aware 824 * CAP_INFOLEVEL_PASSTHRU 0x2000 The server supports passthru information 825 * level processing capability. 826 * CAP_LARGE_READX 0x4000 The server supports large 827 * SMB_COM_READ_ANDX 828 * CAP_LARGE_WRITEX 0x8000 The server supports large 829 * SMB_COM_WRITE_ANDX 830 * CAP_RESERVED 0x02000000 Reserved for future use. 831 * CAP_EXTENDED_SECURITY 0x80000000 The server supports extended security 832 * exchanges. 833 * 834 * Extended security exchanges provides a means of supporting arbitrary 835 * authentication protocols within CIFS. Security blobs are opaque to the 836 * CIFS protocol; they are messages in some authentication protocol that 837 * has been agreed upon by client and server by some out of band mechanism, 838 * for which CIFS merely functions as a transport. When 839 * CAP_EXTENDED_SECURITY is negotiated, the server includes a first 840 * security blob in its response; subsequent security blobs are exchanged 841 * in SMB_COM_SESSION_SETUP_ANDX requests and responses until the 842 * authentication protocol terminates. 843 */ 844 #define CAP_RAW_MODE 0x0001 845 #define CAP_MPX_MODE 0x0002 846 #define CAP_UNICODE 0x0004 847 #define CAP_LARGE_FILES 0x0008 848 #define CAP_NT_SMBS 0x0010 849 #define CAP_RPC_REMOTE_APIS 0x0020 850 #define CAP_STATUS32 0x0040 851 #define CAP_LEVEL_II_OPLOCKS 0x0080 852 #define CAP_LOCK_AND_READ 0x0100 853 #define CAP_NT_FIND 0x0200 854 #define CAP_BULK_TRANSFER 0x0400 855 #define CAP_COMPRESSED_BULK 0x0800 856 #define CAP_DFS 0x1000 857 #define CAP_INFOLEVEL_PASSTHRU 0x2000 858 #define CAP_LARGE_READX 0x4000 859 #define CAP_LARGE_WRITEX 0x8000 860 #define CAP_RESERVED 0x02000000 861 #define CAP_EXTENDED_SECURITY 0x80000000 862 863 864 /* 865 * Different device types according to NT 866 */ 867 #define FILE_DEVICE_BEEP 0x00000001 868 #define FILE_DEVICE_CD_ROM 0x00000002 869 #define FILE_DEVICE_CD_ROM_FILE_SYSTEM 0x00000003 870 #define FILE_DEVICE_CONTROLLER 0x00000004 871 #define FILE_DEVICE_DATALINK 0x00000005 872 #define FILE_DEVICE_DFS 0x00000006 873 #define FILE_DEVICE_DISK 0x00000007 874 #define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008 875 #define FILE_DEVICE_FILE_SYSTEM 0x00000009 876 #define FILE_DEVICE_INPORT_PORT 0x0000000a 877 #define FILE_DEVICE_KEYBOARD 0x0000000b 878 #define FILE_DEVICE_MAILSLOT 0x0000000c 879 #define FILE_DEVICE_MIDI_IN 0x0000000d 880 #define FILE_DEVICE_MIDI_OUT 0x0000000e 881 #define FILE_DEVICE_MOUSE 0x0000000f 882 #define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010 883 #define FILE_DEVICE_NAMED_PIPE 0x00000011 884 #define FILE_DEVICE_NETWORK 0x00000012 885 #define FILE_DEVICE_NETWORK_BROWSER 0x00000013 886 #define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014 887 #define FILE_DEVICE_NULL 0x00000015 888 #define FILE_DEVICE_PARALLEL_PORT 0x00000016 889 #define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017 890 #define FILE_DEVICE_PRINTER 0x00000018 891 #define FILE_DEVICE_SCANNER 0x00000019 892 #define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a 893 #define FILE_DEVICE_SERIAL_PORT 0x0000001b 894 #define FILE_DEVICE_SCREEN 0x0000001c 895 #define FILE_DEVICE_SOUND 0x0000001d 896 #define FILE_DEVICE_STREAMS 0x0000001e 897 #define FILE_DEVICE_TAPE 0x0000001f 898 #define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020 899 #define FILE_DEVICE_TRANSPORT 0x00000021 900 #define FILE_DEVICE_UNKNOWN 0x00000022 901 #define FILE_DEVICE_VIDEO 0x00000023 902 #define FILE_DEVICE_VIRTUAL_DISK 0x00000024 903 #define FILE_DEVICE_WAVE_IN 0x00000025 904 #define FILE_DEVICE_WAVE_OUT 0x00000026 905 #define FILE_DEVICE_8042_PORT 0x00000027 906 #define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028 907 #define FILE_DEVICE_BATTERY 0x00000029 908 #define FILE_DEVICE_BUS_EXTENDER 0x0000002a 909 #define FILE_DEVICE_MODEM 0x0000002b 910 #define FILE_DEVICE_VDM 0x0000002c 911 912 /* 913 * Some of these device types are not currently accessible over the network 914 * and may never be accessible over the network. Some may change to be 915 * 916 * accessible over the network. The values for device types that may never 917 * be accessible over the network may be redefined to be just reserved at 918 * some date in the future. 919 * 920 * Characteristics is the sum of any of the following: 921 */ 922 923 #define FILE_REMOVABLE_MEDIA 0x00000001 924 #define FILE_READ_ONLY_DEVICE 0x00000002 925 #define FILE_FLOPPY_DISKETTE 0x00000004 926 #define FILE_WRITE_ONE_MEDIA 0x00000008 927 #define FILE_REMOTE_DEVICE 0x00000010 928 #define FILE_DEVICE_IS_MOUNTED 0x00000020 929 #define FILE_VIRTUAL_VOLUME 0x00000040 930 931 /* 932 * CREATE_ANDX ShareAccess Flags 933 */ 934 935 #define FILE_SHARE_NONE 0x00000000 936 #define FILE_SHARE_READ 0x00000001 937 #define FILE_SHARE_WRITE 0x00000002 938 #define FILE_SHARE_DELETE 0x00000004 939 #define FILE_SHARE_ALL 0x00000007 940 #define FILE_SHARE_VALID_FLAGS 0x00000007 941 942 943 /* 944 * CREATE_ANDX CreateDisposition flags 945 * 946 * FILE_SUPERSEDE If the file already exists it should be superseded 947 * by the specified file. If the file does not already 948 * exist then it should be created. 949 * 950 * FILE_CREATE If the file already exists the operation should fail. 951 * If the file does not already exist then it should be 952 * created. (aka CREATE_NEW) 953 * 954 * FILE_OPEN If the file already exists then it should be opened. 955 * If the file does not already exist then the operation 956 * should fail. (aka OPEN_EXISTING) 957 * 958 * FILE_OPEN_IF If the file already exists then it should be opened. 959 * If the file does not already exist then it should be 960 * created. (aka OPEN_ALWAYS) 961 * 962 * FILE_OVERWRITE If the file already exists, it should be opened and 963 * overwritten. If the file does not already exist then 964 * the operation should fail. (aka TRUNCATE_EXISTING) 965 * 966 * FILE_OVERWRITE_IF If the file already exists, it should be opened and 967 * overwritten. If the file does not already exist then 968 * it should be created. (aka CREATE_ALWAYS) 969 */ 970 #define FILE_SUPERSEDE 0x00000000 971 #define FILE_OPEN 0x00000001 972 #define FILE_CREATE 0x00000002 973 #define FILE_OPEN_IF 0x00000003 974 #define FILE_OVERWRITE 0x00000004 975 #define FILE_OVERWRITE_IF 0x00000005 976 #define FILE_MAXIMUM_DISPOSITION 0x00000005 977 978 /* 979 * CREATE_ANDX Impersonation levels 980 */ 981 982 #define SECURITY_ANONYMOUS 0x00000001 983 #define SECURITY_IDENTIFICATION 0x00000002 984 #define SECURITY_IMPERSONATION 0x00000003 985 #define SECURITY_DELEGATION 0x00000004 986 987 /* 988 * CREATE_ANDX SecurityFlags 989 */ 990 991 #define SECURITY_CONTEXT_TRACKING 0x00000001 992 #define SECURITY_EFFECTIVE_ONLY 0x00000002 993 994 /* 995 * Server types 996 */ 997 #define SV_WORKSTATION 0x00000001 /* All workstations */ 998 #define SV_SERVER 0x00000002 /* All servers */ 999 #define SV_SQLSERVER 0x00000004 /* running with SQL server */ 1000 #define SV_DOMAIN_CTRL 0x00000008 /* Primary domain controller */ 1001 #define SV_DOMAIN_BAKCTRL 0x00000010 /* Backup domain controller */ 1002 #define SV_TIME_SOURCE 0x00000020 /* running timesource service */ 1003 #define SV_AFP 0x00000040 /* Apple File Protocol */ 1004 #define SV_NOVELL 0x00000080 /* Novell servers */ 1005 #define SV_DOMAIN_MEMBER 0x00000100 /* Domain Member */ 1006 #define SV_PRINTQ_SERVER 0x00000200 /* Server sharing print queue */ 1007 #define SV_DIALIN_SERVER 0x00000400 /* Server running dialin */ 1008 #define SV_XENIX_SERVER 0x00000800 /* Xenix server */ 1009 #define SV_NT 0x00001000 /* NT server */ 1010 #define SV_WFW 0x00002000 /* Server running Windows for */ 1011 #define SV_SERVER_NT 0x00008000 /* Windows NT non DC server */ 1012 #define SV_POTENTIAL_BROWSER 0x00010000 /* can run browser service */ 1013 #define SV_BACKUP_BROWSER 0x00020000 /* Backup browser server */ 1014 #define SV_MASTER_BROWSER 0x00040000 /* Master browser server */ 1015 #define SV_DOMAIN_MASTER 0x00080000 /* Domain Master Browser */ 1016 #define SV_OSF 0x00100000 /* OSF operating system */ 1017 #define SV_VMS 0x00200000 /* VMS operating system */ 1018 #define SV_WINDOWS_95_PLUS 0x00400000 /* Windows 95 or better */ 1019 1020 #define SV_LOCAL_LIST_ONLY 0x40000000 /* Enumerate only "local" */ 1021 #define SV_TYPE_DOMAIN_ENUM 0x80000000 /* Enumerate Domains */ 1022 1023 #define MY_SERVER_TYPE (SV_SERVER | SV_NT | SV_SERVER_NT) 1024 1025 1026 #define PRQ_ACTIVE 0 /* Active */ 1027 #define PRQ_PAUSE 1 /* Paused */ 1028 #define PRQ_ERROR 2 /* Error Occurred */ 1029 #define PRQ_PENDING 3 /* Deletion pending */ 1030 1031 #define PRJ_QS_QUEUED 0 /* Active */ 1032 #define PRJ_QS_PAUSED 1 /* Paused */ 1033 #define PRJ_QS_SPOOLING 2 /* Paused */ 1034 #define PRJ_QS_PRINTING 3 /* Paused */ 1035 1036 1037 #define SHARE_ACCESS_READ 0x01 /* read & execute from resource */ 1038 #define SHARE_ACCESS_WRITE 0x02 /* write data to resource */ 1039 #define SHARE_ACCESS_CREATE 0x04 /* create an instance of */ 1040 #define SHARE_ACCESS_EXEC 0x08 /* execute from resource */ 1041 #define SHARE_ACCESS_DELETE 0x10 /* Permission to delete the resource */ 1042 #define SHARE_ACCESS_ATTRIB 0x20 /* Permission to modify the resource */ 1043 #define SHARE_ACCESS_PERM 0x40 /* Permission to change permissions */ 1044 #define SHARE_ACCESS_ALL 0x7F /* All of the above permissions */ 1045 1046 1047 /* 1048 * SMB_COM_NT_TRANSACTION sub-command codes (CIFS/1.0 section 5.3) 1049 * 1050 * SubCommand Code Value Description 1051 * =============================== ===== ================================= 1052 * NT_TRANSACT_CREATE 1 File open/create 1053 * NT_TRANSACT_IOCTL 2 Device IOCTL 1054 * NT_TRANSACT_SET_SECURITY_DESC 3 Set security descriptor 1055 * NT_TRANSACT_NOTIFY_CHANGE 4 Start directory watch 1056 * NT_TRANSACT_RENAME 5 Reserved (handle-based rename) 1057 * NT_TRANSACT_QUERY_SECURITY_DESC 6 Retrieve security descriptor 1058 * NT_TRANSACT_QUERY_QUOTA 7 Retrieve quota information 1059 * NT_TRANSACT_SET_QUOTA 8 Set quota information 1060 */ 1061 #define NT_TRANSACT_MIN_FUNCTION 1 1062 1063 #define NT_TRANSACT_CREATE 1 1064 #define NT_TRANSACT_IOCTL 2 1065 #define NT_TRANSACT_SET_SECURITY_DESC 3 1066 #define NT_TRANSACT_NOTIFY_CHANGE 4 1067 #define NT_TRANSACT_RENAME 5 1068 #define NT_TRANSACT_QUERY_SECURITY_DESC 6 1069 #define NT_TRANSACT_QUERY_QUOTA 7 1070 #define NT_TRANSACT_SET_QUOTA 8 1071 1072 #define NT_TRANSACT_MAX_FUNCTION 8 1073 1074 1075 /* 1076 * Pipe states 1077 */ 1078 #define SMB_PIPE_READMODE_BYTE 0x0000 1079 #define SMB_PIPE_READMODE_MESSAGE 0x0100 1080 #define SMB_PIPE_TYPE_BYTE 0x0000 1081 #define SMB_PIPE_TYPE_MESSAGE 0x0400 1082 #define SMB_PIPE_END_CLIENT 0x0000 1083 #define SMB_PIPE_END_SERVER 0x4000 1084 #define SMB_PIPE_WAIT 0x0000 1085 #define SMB_PIPE_NOWAIT 0x8000 1086 #define SMB_PIPE_UNLIMITED_INSTANCES 0x00FF 1087 1088 /* 1089 * smb_com_seek request 1090 */ 1091 #define SMB_SEEK_SET 0 /* set file offset to specified offset */ 1092 #define SMB_SEEK_CUR 1 /* set file offset to current plus specified offset */ 1093 #define SMB_SEEK_END 2 /* set file offset to EOF plus specified offset */ 1094 1095 /* 1096 * API Numbers for Transact based RAP (Remote Administration Protocol) calls 1097 */ 1098 #define API_WshareEnum 0 1099 #define API_WshareGetInfo 1 1100 #define API_WshareSetInfo 2 1101 #define API_WshareAdd 3 1102 #define API_WshareDel 4 1103 #define API_NetShareCheck 5 1104 #define API_WsessionEnum 6 1105 #define API_WsessionGetInfo 7 1106 #define API_WsessionDel 8 1107 #define API_WconnectionEnum 9 1108 #define API_WfileEnum 10 1109 #define API_WfileGetInfo 11 1110 #define API_WfileClose 12 1111 #define API_WserverGetInfo 13 1112 #define API_WserverSetInfo 14 1113 #define API_WserverDiskEnum 15 1114 #define API_WserverAdminCommand 16 1115 #define API_NetAuditOpen 17 1116 #define API_WauditClear 18 1117 #define API_NetErrorLogOpen 19 1118 #define API_WerrorLogClear 20 1119 #define API_NetCharDevEnum 21 1120 #define API_NetCharDevGetInfo 22 1121 #define API_WCharDevControl 23 1122 #define API_NetCharDevQEnum 24 1123 #define API_NetCharDevQGetInfo 25 1124 #define API_WCharDevQSetInfo 26 1125 #define API_WCharDevQPurge 27 1126 #define API_WCharDevQPurgeSelf 28 1127 #define API_WMessageNameEnum 29 1128 #define API_WMessageNameGetInfo 30 1129 #define API_WMessageNameAdd 31 1130 #define API_WMessageNameDel 32 1131 #define API_WMessageNameFwd 33 1132 #define API_WMessageNameUnFwd 34 1133 #define API_WMessageBufferSend 35 1134 #define API_WMessageFileSend 36 1135 #define API_WMessageLogFileSet 37 1136 #define API_WMessageLogFileGet 38 1137 #define API_WServiceEnum 39 1138 #define API_WServiceInstall 40 1139 #define API_WServiceControl 41 1140 #define API_WAccessEnum 42 1141 #define API_WAccessGetInfo 43 1142 #define API_WAccessSetInfo 44 1143 #define API_WAccessAdd 45 1144 #define API_WAccessDel 46 1145 #define API_WGroupEnum 47 1146 #define API_WGroupAdd 48 1147 #define API_WGroupDel 49 1148 #define API_WGroupAddUser 50 1149 #define API_WGroupDelUser 51 1150 #define API_WGroupGetUsers 52 1151 #define API_WUserEnum 53 1152 #define API_WUserAdd 54 1153 #define API_WUserDel 55 1154 #define API_WUserGetInfo 56 1155 #define API_WUserSetInfo 57 1156 #define API_WUserPasswordSet 58 1157 #define API_WUserGetGroups 59 1158 #define API_DeadTableEntry 60 1159 #define API_WWkstaSetUID 62 1160 #define API_WWkstaGetInfo 63 1161 #define API_WWkstaSetInfo 64 1162 #define API_WUseEnum 65 1163 #define API_WUseAdd 66 1164 #define API_WUseDel 67 1165 #define API_WUseGetInfo 68 1166 #define API_WPrintQEnum 69 1167 #define API_WPrintQGetInfo 70 1168 #define API_WPrintQSetInfo 71 1169 #define API_WPrintQAdd 72 1170 #define API_WPrintQDel 73 1171 #define API_WPrintQPause 74 1172 #define API_WPrintQContinue 75 1173 #define API_WPrintJobEnum 76 1174 #define API_WPrintJobGetInfo 77 1175 #define API_WPrintJobSetInfo_OLD 78 1176 #define API_WPrintJobDel 81 1177 #define API_WPrintJobPause 82 1178 #define API_WPrintJobContinue 83 1179 #define API_WPrintDestEnum 84 1180 #define API_WPrintDestGetInfo 85 1181 #define API_WPrintDestControl 86 1182 #define API_WProfileSave 87 1183 #define API_WProfileLoad 88 1184 #define API_WStatisticsGet 89 1185 #define API_WStatisticsClear 90 1186 #define API_NetRemoteTOD 91 1187 #define API_WNetBiosEnum 92 1188 #define API_WNetBiosGetInfo 93 1189 #define API_NetServerEnum 94 1190 #define API_I_NetServerEnum 95 1191 #define API_WServiceGetInfo 96 1192 #define API_WPrintQPurge 103 1193 #define API_NetServerEnum2 104 1194 #define API_WAccessGetUserPerms 105 1195 #define API_WGroupGetInfo 106 1196 #define API_WGroupSetInfo 107 1197 #define API_WGroupSetUsers 108 1198 #define API_WUserSetGroups 109 1199 #define API_WUserModalsGet 110 1200 #define API_WUserModalsSet 111 1201 #define API_WFileEnum2 112 1202 #define API_WUserAdd2 113 1203 #define API_WUserSetInfo2 114 1204 #define API_WUserPasswordSet2 115 1205 #define API_I_NetServerEnum2 116 1206 #define API_WConfigGet2 117 1207 #define API_WConfigGetAll2 118 1208 #define API_WGetDCName 119 1209 #define API_NetHandleGetInfo 120 1210 #define API_NetHandleSetInfo 121 1211 #define API_WStatisticsGet2 122 1212 #define API_WBuildGetInfo 123 1213 #define API_WFileGetInfo2 124 1214 #define API_WFileClose2 125 1215 #define API_WNetServerReqChallenge 126 1216 #define API_WNetServerAuthenticate 127 1217 #define API_WNetServerPasswordSet 128 1218 #define API_WNetAccountDeltas 129 1219 #define API_WNetAccountSync 130 1220 #define API_WUserEnum2 131 1221 #define API_WWkstaUserLogon 132 1222 #define API_WWkstaUserLogoff 133 1223 #define API_WLogonEnum 134 1224 #define API_WErrorLogRead 135 1225 #define API_WI_NetPathType 136 1226 #define API_WI_NetPathCanonicalize 137 1227 #define API_WI_NetPathCompare 138 1228 #define API_WI_NetNameValidate 139 1229 #define API_WI_NetNameCanonicalize 140 1230 #define API_WI_NetNameCompare 141 1231 #define API_WAuditRead 142 1232 #define API_WPrintDestAdd 143 1233 #define API_WPrintDestSetInfo 144 1234 #define API_WPrintDestDel 145 1235 #define API_WUserValidate2 146 1236 #define API_WPrintJobSetInfo 147 1237 #define API_TI_NetServerDiskEnum 148 1238 #define API_TI_NetServerDiskGetInfo 149 1239 #define API_TI_FTVerifyMirror 150 1240 #define API_TI_FTAbortVerify 151 1241 #define API_TI_FTGetInfo 152 1242 #define API_TI_FTSetInfo 153 1243 #define API_TI_FTLockDisk 154 1244 #define API_TI_FTFixError 155 1245 #define API_TI_FTAbortFix 156 1246 #define API_TI_FTDiagnoseError 157 1247 #define API_TI_FTGetDriveStats 158 1248 #define API_TI_FTErrorGetInfo 160 1249 #define API_NetAccessCheck 163 1250 #define API_NetAlertRaise 164 1251 #define API_NetAlertStart 165 1252 #define API_NetAlertStop 166 1253 #define API_NetAuditWrite 167 1254 #define API_NetIRemoteAPI 168 1255 #define API_NetServiceStatus 169 1256 #define API_I_NetServerRegister 170 1257 #define API_I_NetServerDeregister 171 1258 #define API_I_NetSessionEntryMake 172 1259 #define API_I_NetSessionEntryClear 173 1260 #define API_I_NetSessionEntryGetInfo 174 1261 #define API_I_NetSessionEntrySetInfo 175 1262 #define API_I_NetConnectionEntryMake 176 1263 #define API_I_NetConnectionEntryClear 177 1264 #define API_I_NetConnectionEntrySetInfo 178 1265 #define API_I_NetConnectionEntryGetInfo 179 1266 #define API_I_NetFileEntryMake 180 1267 #define API_I_NetFileEntryClear 181 1268 #define API_I_NetFileEntrySetInfo 182 1269 #define API_I_NetFileEntryGetInfo 183 1270 #define API_AltSrvMessageBufferSend 184 1271 #define API_AltSrvMessageFileSend 185 1272 #define API_wI_NetRplWkstaEnum 186 1273 #define API_wI_NetRplWkstaGetInfo 187 1274 #define API_wI_NetRplWkstaSetInfo 188 1275 #define API_wI_NetRplWkstaAdd 189 1276 #define API_wI_NetRplWkstaDel 190 1277 #define API_wI_NetRplProfileEnum 191 1278 #define API_wI_NetRplProfileGetInfo 192 1279 #define API_wI_NetRplProfileSetInfo 193 1280 #define API_wI_NetRplProfileAdd 194 1281 #define API_wI_NetRplProfileDel 195 1282 #define API_wI_NetRplProfileClone 196 1283 #define API_wI_NetRplBaseProfileEnum 197 1284 #define API_WIServerSetInfo 201 1285 #define API_WPrintDriverEnum 205 1286 #define API_WPrintQProcessorEnum 206 1287 #define API_WPrintPortEnum 207 1288 #define API_WNetWriteUpdateLog 208 1289 #define API_WNetAccountUpdate 209 1290 #define API_WNetAccountConfirmUpdate 210 1291 #define API_WConfigSet 211 1292 #define API_WAccountsReplicate 212 1293 #define API_SamOEMChgPasswordUser2_P 214 1294 #define API_NetServerEnum3 215 1295 #define API_WprintDriverGetInfo 250 1296 #define API_WprintDriverSetInfo 251 1297 #define API_WaliasAdd 252 1298 #define API_WaliasDel 253 1299 #define API_WaliasGetInfo 254 1300 #define API_WaliasSetInfo 255 1301 #define API_WaliasEnum 256 1302 #define API_WuserGetLogonAsn 257 1303 #define API_WuserSetLogonAsn 258 1304 #define API_WuserGetAppSel 259 1305 #define API_WuserSetAppSel 260 1306 #define API_WappAdd 261 1307 #define API_WappDel 262 1308 #define API_WappGetInfo 263 1309 #define API_WappSetInfo 264 1310 #define API_WappEnum 265 1311 #define API_WUserDCDBInit 266 1312 #define API_WDASDAdd 267 1313 #define API_WDASDDel 268 1314 #define API_WDASDGetInfo 269 1315 #define API_WDASDSetInfo 270 1316 #define API_WDASDEnum 271 1317 #define API_WDASDCheck 272 1318 #define API_WDASDCtl 273 1319 #define API_WuserRemoteLogonCheck 274 1320 #define API_WUserPasswordSet3 275 1321 #define API_WCreateRIPLMachine 276 1322 #define API_WDeleteRIPLMachine 277 1323 #define API_WGetRIPLMachineInfo 278 1324 #define API_WSetRIPLMachineInfo 279 1325 #define API_WEnumRIPLMachine 280 1326 #define API_WI_ShareAdd 281 1327 #define API_WI_AliasEnum 282 1328 #define API_WaccessApply 283 1329 #define API_WPrt16Query 284 1330 #define API_WPrt16Set 285 1331 #define API_WUserDel100 286 1332 #define API_WUserRemoteLogonCheck2 287 1333 #define API_WRemoteTODSet 294 1334 #define API_WprintJobMoveAll 295 1335 #define API_W16AppParmAdd 296 1336 #define API_W16AppParmDel 297 1337 #define API_W16AppParmGet 298 1338 #define API_W16AppParmSet 299 1339 #define API_W16RIPLMachineCreate 300 1340 #define API_W16RIPLMachineGetInfo 301 1341 #define API_W16RIPLMachineSetInfo 302 1342 #define API_W16RIPLMachineEnum 303 1343 #define API_W16RIPLMachineListParmEnum 304 1344 #define API_W16RIPLMachClassGetInfo 305 1345 #define API_W16RIPLMachClassEnum 306 1346 #define API_W16RIPLMachClassCreate 307 1347 #define API_W16RIPLMachClassSetInfo 308 1348 #define API_W16RIPLMachClassDelete 309 1349 #define API_W16RIPLMachClassLPEnum 310 1350 #define API_W16RIPLMachineDelete 311 1351 #define API_W16WSLevelGetInfo 312 1352 #define API_WserverNameAdd 313 1353 #define API_WserverNameDel 314 1354 #define API_WserverNameEnum 315 1355 #define API_I_WDASDEnum 316 1356 #define API_I_WDASDEnumTerminate 317 1357 #define API_I_WDASDSetInfo2 318 1358 #define MAX_RAP_API 318 1359 1360 #ifdef __cplusplus 1361 } 1362 #endif 1363 1364 #endif /* _SMBSRV_SMB_H */ 1365