xref: /titanic_52/usr/src/uts/common/io/nxge/nxge_virtual.c (revision 051aabe6136ff13e81542a427e9693ffe1503525)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include <sys/nxge/nxge_impl.h>
29 #include <sys/nxge/nxge_mac.h>
30 #include <sys/nxge/nxge_hio.h>
31 
32 static void nxge_get_niu_property(dev_info_t *, niu_type_t *);
33 static nxge_status_t nxge_get_mac_addr_properties(p_nxge_t);
34 static nxge_status_t nxge_use_cfg_n2niu_properties(p_nxge_t);
35 static void nxge_use_cfg_neptune_properties(p_nxge_t);
36 static void nxge_use_cfg_dma_config(p_nxge_t);
37 static void nxge_use_cfg_vlan_class_config(p_nxge_t);
38 static void nxge_use_cfg_mac_class_config(p_nxge_t);
39 static void nxge_use_cfg_class_config(p_nxge_t);
40 static void nxge_use_cfg_link_cfg(p_nxge_t);
41 static void nxge_set_hw_dma_config(p_nxge_t);
42 static void nxge_set_hw_vlan_class_config(p_nxge_t);
43 static void nxge_set_hw_mac_class_config(p_nxge_t);
44 static void nxge_set_hw_class_config(p_nxge_t);
45 static nxge_status_t nxge_use_default_dma_config_n2(p_nxge_t);
46 static void nxge_ldgv_setup(p_nxge_ldg_t *, p_nxge_ldv_t *, uint8_t,
47 	uint8_t, int *);
48 static void nxge_init_mmac(p_nxge_t, boolean_t);
49 static void nxge_set_rdc_intr_property(p_nxge_t);
50 
51 uint32_t nxge_use_hw_property = 1;
52 uint32_t nxge_groups_per_port = 2;
53 
54 extern uint32_t nxge_use_partition;
55 extern uint32_t nxge_dma_obp_props_only;
56 
57 extern uint16_t nxge_rcr_timeout;
58 extern uint16_t nxge_rcr_threshold;
59 
60 extern uint_t nxge_rx_intr(void *, void *);
61 extern uint_t nxge_tx_intr(void *, void *);
62 extern uint_t nxge_mif_intr(void *, void *);
63 extern uint_t nxge_mac_intr(void *, void *);
64 extern uint_t nxge_syserr_intr(void *, void *);
65 extern void *nxge_list;
66 
67 #define	NXGE_SHARED_REG_SW_SIM
68 
69 #ifdef NXGE_SHARED_REG_SW_SIM
70 uint64_t global_dev_ctrl = 0;
71 #endif
72 
73 #define	MAX_SIBLINGS	NXGE_MAX_PORTS
74 
75 extern uint32_t nxge_rbr_size;
76 extern uint32_t nxge_rcr_size;
77 extern uint32_t nxge_tx_ring_size;
78 extern uint32_t nxge_rbr_spare_size;
79 
80 extern npi_status_t npi_mac_altaddr_disable(npi_handle_t, uint8_t, uint8_t);
81 
82 static uint8_t p2_tx_fair[2] = {12, 12};
83 static uint8_t p2_tx_equal[2] = {12, 12};
84 static uint8_t p4_tx_fair[4] = {6, 6, 6, 6};
85 static uint8_t p4_tx_equal[4] = {6, 6, 6, 6};
86 static uint8_t p2_rx_fair[2] = {8, 8};
87 static uint8_t p2_rx_equal[2] = {8, 8};
88 static uint8_t p4_rx_fair[4] = {4, 4, 4, 4};
89 static uint8_t p4_rx_equal[4] = {4, 4, 4, 4};
90 
91 static uint8_t p2_rdcgrp_fair[2] = {4, 4};
92 static uint8_t p2_rdcgrp_equal[2] = {4, 4};
93 static uint8_t p4_rdcgrp_fair[4] = {2, 2, 1, 1};
94 static uint8_t p4_rdcgrp_equal[4] = {2, 2, 2, 2};
95 static uint8_t p2_rdcgrp_cls[2] = {1, 1};
96 static uint8_t p4_rdcgrp_cls[4] = {1, 1, 1, 1};
97 
98 static uint8_t rx_4_1G[4] = {4, 4, 4, 4};
99 static uint8_t rx_2_10G[2] = {8, 8};
100 static uint8_t rx_2_10G_2_1G[4] = {6, 6, 2, 2};
101 static uint8_t rx_1_10G_3_1G[4] = {10, 2, 2, 2};
102 static uint8_t rx_1_1G_1_10G_2_1G[4] = {2, 10, 2, 2};
103 
104 static uint8_t tx_4_1G[4] = {6, 6, 6, 6};
105 static uint8_t tx_2_10G[2] = {12, 12};
106 static uint8_t tx_2_10G_2_1G[4] = {10, 10, 2, 2};
107 static uint8_t tx_1_10G_3_1G[4] = {12, 4, 4, 4};
108 static uint8_t tx_1_1G_1_10G_2_1G[4] = {4, 12, 4, 4};
109 
110 typedef enum {
111 	DEFAULT = 0,
112 	EQUAL,
113 	FAIR,
114 	CUSTOM,
115 	CLASSIFY,
116 	L2_CLASSIFY,
117 	L3_DISTRIBUTE,
118 	L3_CLASSIFY,
119 	L3_TCAM,
120 	CONFIG_TOKEN_NONE
121 } config_token_t;
122 
123 static char *token_names[] = {
124 	"default",
125 	"equal",
126 	"fair",
127 	"custom",
128 	"classify",
129 	"l2_classify",
130 	"l3_distribute",
131 	"l3_classify",
132 	"l3_tcam",
133 	"none",
134 };
135 
136 void nxge_virint_regs_dump(p_nxge_t nxgep);
137 
138 void
139 nxge_virint_regs_dump(p_nxge_t nxgep)
140 {
141 	npi_handle_t handle;
142 
143 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_virint_regs_dump"));
144 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
145 	(void) npi_vir_dump_pio_fzc_regs_one(handle);
146 	(void) npi_vir_dump_ldgnum(handle);
147 	(void) npi_vir_dump_ldsv(handle);
148 	(void) npi_vir_dump_imask0(handle);
149 	(void) npi_vir_dump_sid(handle);
150 	(void) npi_mac_dump_regs(handle, nxgep->function_num);
151 	(void) npi_ipp_dump_regs(handle, nxgep->function_num);
152 	(void) npi_fflp_dump_regs(handle);
153 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_virint_regs_dump"));
154 }
155 
156 /*
157  * For now: we hard coded the DMA configurations.
158  *	    and assume for one partition only.
159  *
160  *       OBP. Then OBP will pass this partition's
161  *	 Neptune configurations to fcode to create
162  *	 properties for them.
163  *
164  *	Since Neptune(PCI-E) and NIU (Niagara-2) has
165  *	different bus interfaces, the driver needs
166  *	to know which bus it is connected to.
167  *  	Ravinder suggested: create a device property.
168  *	In partitioning environment, we cannot
169  *	use .conf file (need to check). If conf changes,
170  *	need to reboot the system.
171  *	The following function assumes that we will
172  *	retrieve its properties from a virtualized nexus driver.
173  */
174 
175 nxge_status_t
176 nxge_cntlops(dev_info_t *dip, nxge_ctl_enum_t ctlop, void *arg, void *result)
177 {
178 	nxge_status_t status = NXGE_OK;
179 	int instance;
180 	p_nxge_t nxgep;
181 
182 #ifndef NXGE_SHARED_REG_SW_SIM
183 	npi_handle_t handle;
184 	uint16_t sr16, cr16;
185 #endif
186 	instance = ddi_get_instance(dip);
187 	NXGE_DEBUG_MSG((NULL, VIR_CTL, "Instance %d ", instance));
188 
189 	if (nxge_list == NULL) {
190 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
191 		    "nxge_cntlops: nxge_list null"));
192 		return (NXGE_ERROR);
193 	}
194 	nxgep = (p_nxge_t)ddi_get_soft_state(nxge_list, instance);
195 	if (nxgep == NULL) {
196 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
197 		    "nxge_cntlops: nxgep null"));
198 		return (NXGE_ERROR);
199 	}
200 #ifndef NXGE_SHARED_REG_SW_SIM
201 	handle = nxgep->npi_reg_handle;
202 #endif
203 	switch (ctlop) {
204 	case NXGE_CTLOPS_NIUTYPE:
205 		nxge_get_niu_property(dip, (niu_type_t *)result);
206 		return (status);
207 
208 	case NXGE_CTLOPS_GET_SHARED_REG:
209 #ifdef NXGE_SHARED_REG_SW_SIM
210 		*(uint64_t *)result = global_dev_ctrl;
211 		return (0);
212 #else
213 		status = npi_dev_func_sr_sr_get(handle, &sr16);
214 		*(uint16_t *)result = sr16;
215 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
216 		    "nxge_cntlops: NXGE_CTLOPS_GET_SHARED_REG"));
217 		return (0);
218 #endif
219 
220 	case NXGE_CTLOPS_SET_SHARED_REG_LOCK:
221 #ifdef NXGE_SHARED_REG_SW_SIM
222 		global_dev_ctrl = *(uint64_t *)arg;
223 		return (0);
224 #else
225 		status = NPI_FAILURE;
226 		while (status != NPI_SUCCESS)
227 			status = npi_dev_func_sr_lock_enter(handle);
228 
229 		sr16 = *(uint16_t *)arg;
230 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
231 		status = npi_dev_func_sr_lock_free(handle);
232 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
233 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
234 		return (0);
235 #endif
236 
237 	case NXGE_CTLOPS_UPDATE_SHARED_REG:
238 #ifdef NXGE_SHARED_REG_SW_SIM
239 		global_dev_ctrl |= *(uint64_t *)arg;
240 		return (0);
241 #else
242 		status = NPI_FAILURE;
243 		while (status != NPI_SUCCESS)
244 			status = npi_dev_func_sr_lock_enter(handle);
245 		status = npi_dev_func_sr_sr_get(handle, &sr16);
246 		sr16 |= *(uint16_t *)arg;
247 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
248 		status = npi_dev_func_sr_lock_free(handle);
249 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
250 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
251 		return (0);
252 #endif
253 
254 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG_UL:
255 #ifdef NXGE_SHARED_REG_SW_SIM
256 		global_dev_ctrl |= *(uint64_t *)arg;
257 		return (0);
258 #else
259 		status = npi_dev_func_sr_sr_get(handle, &sr16);
260 		cr16 = *(uint16_t *)arg;
261 		sr16 &= ~cr16;
262 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
263 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
264 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
265 		return (0);
266 #endif
267 
268 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG:
269 #ifdef NXGE_SHARED_REG_SW_SIM
270 		global_dev_ctrl |= *(uint64_t *)arg;
271 		return (0);
272 #else
273 		status = NPI_FAILURE;
274 		while (status != NPI_SUCCESS)
275 			status = npi_dev_func_sr_lock_enter(handle);
276 		status = npi_dev_func_sr_sr_get(handle, &sr16);
277 		cr16 = *(uint16_t *)arg;
278 		sr16 &= ~cr16;
279 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
280 		status = npi_dev_func_sr_lock_free(handle);
281 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
282 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
283 		return (0);
284 #endif
285 
286 	case NXGE_CTLOPS_GET_LOCK_BLOCK:
287 #ifdef NXGE_SHARED_REG_SW_SIM
288 		global_dev_ctrl |= *(uint64_t *)arg;
289 		return (0);
290 #else
291 		status = NPI_FAILURE;
292 		while (status != NPI_SUCCESS)
293 			status = npi_dev_func_sr_lock_enter(handle);
294 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
295 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_BLOCK"));
296 		return (0);
297 #endif
298 	case NXGE_CTLOPS_GET_LOCK_TRY:
299 #ifdef NXGE_SHARED_REG_SW_SIM
300 		global_dev_ctrl |= *(uint64_t *)arg;
301 		return (0);
302 #else
303 		status = npi_dev_func_sr_lock_enter(handle);
304 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
305 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_TRY"));
306 		if (status == NPI_SUCCESS)
307 			return (NXGE_OK);
308 		else
309 			return (NXGE_ERROR);
310 #endif
311 	case NXGE_CTLOPS_FREE_LOCK:
312 #ifdef NXGE_SHARED_REG_SW_SIM
313 		global_dev_ctrl |= *(uint64_t *)arg;
314 		return (0);
315 #else
316 		status = npi_dev_func_sr_lock_free(handle);
317 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
318 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_FREE"));
319 		if (status == NPI_SUCCESS)
320 			return (NXGE_OK);
321 		else
322 			return (NXGE_ERROR);
323 #endif
324 
325 	default:
326 		status = NXGE_ERROR;
327 	}
328 
329 	return (status);
330 }
331 
332 void
333 nxge_common_lock_get(p_nxge_t nxgep)
334 {
335 	uint32_t status = NPI_FAILURE;
336 	npi_handle_t handle;
337 
338 #if	defined(NXGE_SHARE_REG_SW_SIM)
339 	return;
340 #endif
341 	handle = nxgep->npi_reg_handle;
342 	while (status != NPI_SUCCESS)
343 		status = npi_dev_func_sr_lock_enter(handle);
344 }
345 
346 void
347 nxge_common_lock_free(p_nxge_t nxgep)
348 {
349 	npi_handle_t handle;
350 
351 #if	defined(NXGE_SHARE_REG_SW_SIM)
352 	return;
353 #endif
354 	handle = nxgep->npi_reg_handle;
355 	(void) npi_dev_func_sr_lock_free(handle);
356 }
357 
358 
359 static void
360 nxge_get_niu_property(dev_info_t *dip, niu_type_t *niu_type)
361 {
362 	uchar_t *prop_val;
363 	uint_t prop_len;
364 
365 	*niu_type = NIU_TYPE_NONE;
366 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0,
367 	    "niu-type", (uchar_t **)&prop_val,
368 	    &prop_len) == DDI_PROP_SUCCESS) {
369 		if (strncmp("niu", (caddr_t)prop_val, (size_t)prop_len) == 0) {
370 			*niu_type = N2_NIU;
371 		}
372 		ddi_prop_free(prop_val);
373 	}
374 }
375 
376 static config_token_t
377 nxge_get_config_token(char *prop)
378 {
379 	config_token_t token = DEFAULT;
380 
381 	while (token < CONFIG_TOKEN_NONE) {
382 		if (strncmp(prop, token_names[token], 4) == 0)
383 			break;
384 		token++;
385 	}
386 	return (token);
387 }
388 
389 /* per port */
390 
391 static nxge_status_t
392 nxge_update_rxdma_grp_properties(p_nxge_t nxgep, config_token_t token,
393 	dev_info_t *s_dip[])
394 {
395 	nxge_status_t status = NXGE_OK;
396 	int ddi_status;
397 	int num_ports = nxgep->nports;
398 	int port, bits, j;
399 	uint8_t start_grp = 0, num_grps = 0;
400 	p_nxge_param_t param_arr;
401 	uint32_t grp_bitmap[MAX_SIBLINGS];
402 	int custom_start_grp[MAX_SIBLINGS];
403 	int custom_num_grp[MAX_SIBLINGS];
404 	uint8_t bad_config = B_FALSE;
405 	char *start_prop, *num_prop, *cfg_prop;
406 
407 	start_grp = 0;
408 	param_arr = nxgep->param_arr;
409 	start_prop = param_arr[param_rdc_grps_start].fcode_name;
410 	num_prop = param_arr[param_rx_rdc_grps].fcode_name;
411 
412 	switch (token) {
413 	case FAIR:
414 		cfg_prop = "fair";
415 		for (port = 0; port < num_ports; port++) {
416 			custom_num_grp[port] =
417 			    (num_ports == 4) ?
418 			    p4_rdcgrp_fair[port] :
419 			    p2_rdcgrp_fair[port];
420 			custom_start_grp[port] = start_grp;
421 			start_grp += custom_num_grp[port];
422 		}
423 		break;
424 
425 	case EQUAL:
426 		cfg_prop = "equal";
427 		for (port = 0; port < num_ports; port++) {
428 			custom_num_grp[port] =
429 			    (num_ports == 4) ?
430 			    p4_rdcgrp_equal[port] :
431 			    p2_rdcgrp_equal[port];
432 			custom_start_grp[port] = start_grp;
433 			start_grp += custom_num_grp[port];
434 		}
435 		break;
436 
437 
438 	case CLASSIFY:
439 		cfg_prop = "classify";
440 		for (port = 0; port < num_ports; port++) {
441 			custom_num_grp[port] = (num_ports == 4) ?
442 			    p4_rdcgrp_cls[port] : p2_rdcgrp_cls[port];
443 			custom_start_grp[port] = start_grp;
444 			start_grp += custom_num_grp[port];
445 		}
446 		break;
447 
448 	case CUSTOM:
449 		cfg_prop = "custom";
450 		/* See if it is good config */
451 		num_grps = 0;
452 		for (port = 0; port < num_ports; port++) {
453 			custom_start_grp[port] =
454 			    ddi_prop_get_int(DDI_DEV_T_NONE, s_dip[port],
455 			    DDI_PROP_DONTPASS, start_prop, -1);
456 			if ((custom_start_grp[port] == -1) ||
457 			    (custom_start_grp[port] >=
458 			    NXGE_MAX_RDC_GRPS)) {
459 				bad_config = B_TRUE;
460 				break;
461 			}
462 			custom_num_grp[port] = ddi_prop_get_int(
463 			    DDI_DEV_T_NONE,
464 			    s_dip[port],
465 			    DDI_PROP_DONTPASS,
466 			    num_prop, -1);
467 
468 			if ((custom_num_grp[port] == -1) ||
469 			    (custom_num_grp[port] >
470 			    NXGE_MAX_RDC_GRPS) ||
471 			    ((custom_num_grp[port] +
472 			    custom_start_grp[port]) >=
473 			    NXGE_MAX_RDC_GRPS)) {
474 				bad_config = B_TRUE;
475 				break;
476 			}
477 			num_grps += custom_num_grp[port];
478 			if (num_grps > NXGE_MAX_RDC_GRPS) {
479 				bad_config = B_TRUE;
480 				break;
481 			}
482 			grp_bitmap[port] = 0;
483 			for (bits = 0;
484 			    bits < custom_num_grp[port];
485 			    bits++) {
486 				grp_bitmap[port] |=
487 				    (1 << (bits + custom_start_grp[port]));
488 			}
489 
490 		}
491 
492 		if (bad_config == B_FALSE) {
493 			/* check for overlap */
494 			for (port = 0; port < num_ports - 1; port++) {
495 				for (j = port + 1; j < num_ports; j++) {
496 					if (grp_bitmap[port] &
497 					    grp_bitmap[j]) {
498 						bad_config = B_TRUE;
499 						break;
500 					}
501 				}
502 				if (bad_config == B_TRUE)
503 					break;
504 			}
505 		}
506 		if (bad_config == B_TRUE) {
507 			/* use default config */
508 			for (port = 0; port < num_ports; port++) {
509 				custom_num_grp[port] =
510 				    (num_ports == 4) ?
511 				    p4_rx_fair[port] : p2_rx_fair[port];
512 				custom_start_grp[port] = start_grp;
513 				start_grp += custom_num_grp[port];
514 			}
515 		}
516 		break;
517 
518 	default:
519 		/* use default config */
520 		cfg_prop = "fair";
521 		for (port = 0; port < num_ports; port++) {
522 			custom_num_grp[port] = (num_ports == 4) ?
523 			    p4_rx_fair[port] : p2_rx_fair[port];
524 			custom_start_grp[port] = start_grp;
525 			start_grp += custom_num_grp[port];
526 		}
527 		break;
528 	}
529 
530 	/* Now Update the rx properties */
531 	for (port = 0; port < num_ports; port++) {
532 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
533 		    "rxdma-grp-cfg", cfg_prop);
534 		if (ddi_status != DDI_PROP_SUCCESS) {
535 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
536 			    " property %s not updating",
537 			    cfg_prop));
538 			status |= NXGE_DDI_FAILED;
539 		}
540 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
541 		    num_prop, custom_num_grp[port]);
542 
543 		if (ddi_status != DDI_PROP_SUCCESS) {
544 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
545 			    " property %s not updating",
546 			    num_prop));
547 			status |= NXGE_DDI_FAILED;
548 		}
549 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
550 		    start_prop, custom_start_grp[port]);
551 
552 		if (ddi_status != DDI_PROP_SUCCESS) {
553 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
554 			    " property %s not updating",
555 			    start_prop));
556 			status |= NXGE_DDI_FAILED;
557 		}
558 	}
559 	if (status & NXGE_DDI_FAILED)
560 		status |= NXGE_ERROR;
561 
562 	return (status);
563 }
564 
565 static nxge_status_t
566 nxge_update_rxdma_properties(p_nxge_t nxgep, config_token_t token,
567 	dev_info_t *s_dip[])
568 {
569 	nxge_status_t status = NXGE_OK;
570 	int ddi_status;
571 	int num_ports = nxgep->nports;
572 	int port, bits, j;
573 	uint8_t start_rdc = 0, num_rdc = 0;
574 	p_nxge_param_t param_arr;
575 	uint32_t rdc_bitmap[MAX_SIBLINGS];
576 	int custom_start_rdc[MAX_SIBLINGS];
577 	int custom_num_rdc[MAX_SIBLINGS];
578 	uint8_t bad_config = B_FALSE;
579 	int *prop_val;
580 	uint_t prop_len;
581 	char *start_rdc_prop, *num_rdc_prop, *cfg_prop;
582 
583 	start_rdc = 0;
584 	param_arr = nxgep->param_arr;
585 	start_rdc_prop = param_arr[param_rxdma_channels_begin].fcode_name;
586 	num_rdc_prop = param_arr[param_rxdma_channels].fcode_name;
587 
588 	switch (token) {
589 	case FAIR:
590 		cfg_prop = "fair";
591 		for (port = 0; port < num_ports; port++) {
592 			custom_num_rdc[port] = (num_ports == 4) ?
593 			    p4_rx_fair[port] : p2_rx_fair[port];
594 			custom_start_rdc[port] = start_rdc;
595 			start_rdc += custom_num_rdc[port];
596 		}
597 		break;
598 
599 	case EQUAL:
600 		cfg_prop = "equal";
601 		for (port = 0; port < num_ports; port++) {
602 			custom_num_rdc[port] = (num_ports == 4) ?
603 			    p4_rx_equal[port] :
604 			    p2_rx_equal[port];
605 			custom_start_rdc[port] = start_rdc;
606 			start_rdc += custom_num_rdc[port];
607 		}
608 		break;
609 
610 	case CUSTOM:
611 		cfg_prop = "custom";
612 		/* See if it is good config */
613 		num_rdc = 0;
614 		for (port = 0; port < num_ports; port++) {
615 			ddi_status = ddi_prop_lookup_int_array(
616 			    DDI_DEV_T_ANY,
617 			    s_dip[port], 0,
618 			    start_rdc_prop,
619 			    &prop_val,
620 			    &prop_len);
621 			if (ddi_status == DDI_SUCCESS)
622 				custom_start_rdc[port] = *prop_val;
623 			else {
624 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
625 				    " %s custom start port %d"
626 				    " read failed ",
627 				    " rxdma-cfg", port));
628 				bad_config = B_TRUE;
629 				status |= NXGE_DDI_FAILED;
630 			}
631 			if ((custom_start_rdc[port] == -1) ||
632 			    (custom_start_rdc[port] >=
633 			    NXGE_MAX_RDCS)) {
634 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
635 				    " %s custom start %d"
636 				    " out of range %x ",
637 				    " rxdma-cfg",
638 				    port,
639 				    custom_start_rdc[port]));
640 				bad_config = B_TRUE;
641 				break;
642 			}
643 			ddi_status = ddi_prop_lookup_int_array(
644 			    DDI_DEV_T_ANY,
645 			    s_dip[port],
646 			    0,
647 			    num_rdc_prop,
648 			    &prop_val,
649 			    &prop_len);
650 
651 			if (ddi_status == DDI_SUCCESS)
652 				custom_num_rdc[port] = *prop_val;
653 			else {
654 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
655 				    " %s custom num port %d"
656 				    " read failed ",
657 				    "rxdma-cfg", port));
658 				bad_config = B_TRUE;
659 				status |= NXGE_DDI_FAILED;
660 			}
661 
662 			if ((custom_num_rdc[port] == -1) ||
663 			    (custom_num_rdc[port] >
664 			    NXGE_MAX_RDCS) ||
665 			    ((custom_num_rdc[port] +
666 			    custom_start_rdc[port]) >
667 			    NXGE_MAX_RDCS)) {
668 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
669 				    " %s custom num %d"
670 				    " out of range %x ",
671 				    " rxdma-cfg",
672 				    port, custom_num_rdc[port]));
673 				bad_config = B_TRUE;
674 				break;
675 			}
676 			num_rdc += custom_num_rdc[port];
677 			if (num_rdc > NXGE_MAX_RDCS) {
678 				bad_config = B_TRUE;
679 				break;
680 			}
681 			rdc_bitmap[port] = 0;
682 			for (bits = 0;
683 			    bits < custom_num_rdc[port]; bits++) {
684 				rdc_bitmap[port] |=
685 				    (1 << (bits + custom_start_rdc[port]));
686 			}
687 		}
688 
689 		if (bad_config == B_FALSE) {
690 			/* check for overlap */
691 			for (port = 0; port < num_ports - 1; port++) {
692 				for (j = port + 1; j < num_ports; j++) {
693 					if (rdc_bitmap[port] &
694 					    rdc_bitmap[j]) {
695 						NXGE_DEBUG_MSG((nxgep,
696 						    CFG_CTL,
697 						    " rxdma-cfg"
698 						    " property custom"
699 						    " bit overlap"
700 						    " %d %d ",
701 						    port, j));
702 						bad_config = B_TRUE;
703 						break;
704 					}
705 				}
706 				if (bad_config == B_TRUE)
707 					break;
708 			}
709 		}
710 		if (bad_config == B_TRUE) {
711 			/* use default config */
712 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
713 			    " rxdma-cfg property:"
714 			    " bad custom config:"
715 			    " use default"));
716 			for (port = 0; port < num_ports; port++) {
717 				custom_num_rdc[port] =
718 				    (num_ports == 4) ?
719 				    p4_rx_fair[port] :
720 				    p2_rx_fair[port];
721 				custom_start_rdc[port] = start_rdc;
722 				start_rdc += custom_num_rdc[port];
723 			}
724 		}
725 		break;
726 
727 	default:
728 		/* use default config */
729 		cfg_prop = "fair";
730 		for (port = 0; port < num_ports; port++) {
731 			custom_num_rdc[port] = (num_ports == 4) ?
732 			    p4_rx_fair[port] : p2_rx_fair[port];
733 			custom_start_rdc[port] = start_rdc;
734 			start_rdc += custom_num_rdc[port];
735 		}
736 		break;
737 	}
738 
739 	/* Now Update the rx properties */
740 	for (port = 0; port < num_ports; port++) {
741 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
742 		    " update property rxdma-cfg with %s ", cfg_prop));
743 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
744 		    "rxdma-cfg", cfg_prop);
745 		if (ddi_status != DDI_PROP_SUCCESS) {
746 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
747 			    " property rxdma-cfg is not updating to %s",
748 			    cfg_prop));
749 			status |= NXGE_DDI_FAILED;
750 		}
751 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
752 		    num_rdc_prop, custom_num_rdc[port]));
753 
754 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
755 		    num_rdc_prop, custom_num_rdc[port]);
756 
757 		if (ddi_status != DDI_PROP_SUCCESS) {
758 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
759 			    " property %s not updating with %d",
760 			    num_rdc_prop, custom_num_rdc[port]));
761 			status |= NXGE_DDI_FAILED;
762 		}
763 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
764 		    start_rdc_prop, custom_start_rdc[port]));
765 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
766 		    start_rdc_prop, custom_start_rdc[port]);
767 
768 		if (ddi_status != DDI_PROP_SUCCESS) {
769 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
770 			    " property %s not updating with %d ",
771 			    start_rdc_prop, custom_start_rdc[port]));
772 			status |= NXGE_DDI_FAILED;
773 		}
774 	}
775 	if (status & NXGE_DDI_FAILED)
776 		status |= NXGE_ERROR;
777 	return (status);
778 }
779 
780 static nxge_status_t
781 nxge_update_txdma_properties(p_nxge_t nxgep, config_token_t token,
782 	dev_info_t *s_dip[])
783 {
784 	nxge_status_t status = NXGE_OK;
785 	int ddi_status = DDI_SUCCESS;
786 	int num_ports = nxgep->nports;
787 	int port, bits, j;
788 	uint8_t start_tdc = 0, num_tdc = 0;
789 	p_nxge_param_t param_arr;
790 	uint32_t tdc_bitmap[MAX_SIBLINGS];
791 	int custom_start_tdc[MAX_SIBLINGS];
792 	int custom_num_tdc[MAX_SIBLINGS];
793 	uint8_t bad_config = B_FALSE;
794 	int *prop_val;
795 	uint_t prop_len;
796 	char *start_tdc_prop, *num_tdc_prop, *cfg_prop;
797 
798 	start_tdc = 0;
799 	param_arr = nxgep->param_arr;
800 	start_tdc_prop = param_arr[param_txdma_channels_begin].fcode_name;
801 	num_tdc_prop = param_arr[param_txdma_channels].fcode_name;
802 
803 	switch (token) {
804 	case FAIR:
805 		cfg_prop = "fair";
806 		for (port = 0; port < num_ports; port++) {
807 			custom_num_tdc[port] = (num_ports == 4) ?
808 			    p4_tx_fair[port] : p2_tx_fair[port];
809 			custom_start_tdc[port] = start_tdc;
810 			start_tdc += custom_num_tdc[port];
811 		}
812 		break;
813 
814 	case EQUAL:
815 		cfg_prop = "equal";
816 		for (port = 0; port < num_ports; port++) {
817 			custom_num_tdc[port] = (num_ports == 4) ?
818 			    p4_tx_equal[port] : p2_tx_equal[port];
819 			custom_start_tdc[port] = start_tdc;
820 			start_tdc += custom_num_tdc[port];
821 		}
822 		break;
823 
824 	case CUSTOM:
825 		cfg_prop = "custom";
826 		/* See if it is good config */
827 		num_tdc = 0;
828 		for (port = 0; port < num_ports; port++) {
829 			ddi_status = ddi_prop_lookup_int_array(
830 			    DDI_DEV_T_ANY, s_dip[port], 0, start_tdc_prop,
831 			    &prop_val, &prop_len);
832 			if (ddi_status == DDI_SUCCESS)
833 				custom_start_tdc[port] = *prop_val;
834 			else {
835 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
836 				    " %s custom start port %d"
837 				    " read failed ", " txdma-cfg", port));
838 				bad_config = B_TRUE;
839 				status |= NXGE_DDI_FAILED;
840 			}
841 
842 			if ((custom_start_tdc[port] == -1) ||
843 			    (custom_start_tdc[port] >=
844 			    NXGE_MAX_RDCS)) {
845 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
846 				    " %s custom start %d"
847 				    " out of range %x ", " txdma-cfg",
848 				    port, custom_start_tdc[port]));
849 				bad_config = B_TRUE;
850 				break;
851 			}
852 
853 			ddi_status = ddi_prop_lookup_int_array(
854 			    DDI_DEV_T_ANY, s_dip[port], 0, num_tdc_prop,
855 			    &prop_val, &prop_len);
856 			if (ddi_status == DDI_SUCCESS)
857 				custom_num_tdc[port] = *prop_val;
858 			else {
859 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
860 				    " %s custom num port %d"
861 				    " read failed ", " txdma-cfg", port));
862 				bad_config = B_TRUE;
863 				status |= NXGE_DDI_FAILED;
864 			}
865 
866 			if ((custom_num_tdc[port] == -1) ||
867 			    (custom_num_tdc[port] >
868 			    NXGE_MAX_TDCS) ||
869 			    ((custom_num_tdc[port] +
870 			    custom_start_tdc[port]) >
871 			    NXGE_MAX_TDCS)) {
872 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
873 				    " %s custom num %d"
874 				    " out of range %x ", " rxdma-cfg",
875 				    port, custom_num_tdc[port]));
876 				bad_config = B_TRUE;
877 				break;
878 			}
879 			num_tdc += custom_num_tdc[port];
880 			if (num_tdc > NXGE_MAX_TDCS) {
881 				bad_config = B_TRUE;
882 				break;
883 			}
884 			tdc_bitmap[port] = 0;
885 			for (bits = 0;
886 			    bits < custom_num_tdc[port]; bits++) {
887 				tdc_bitmap[port] |=
888 				    (1 <<
889 				    (bits + custom_start_tdc[port]));
890 			}
891 
892 		}
893 
894 		if (bad_config == B_FALSE) {
895 			/* check for overlap */
896 			for (port = 0; port < num_ports - 1; port++) {
897 				for (j = port + 1; j < num_ports; j++) {
898 					if (tdc_bitmap[port] &
899 					    tdc_bitmap[j]) {
900 						NXGE_DEBUG_MSG((nxgep, CFG_CTL,
901 						    " rxdma-cfg"
902 						    " property custom"
903 						    " bit overlap"
904 						    " %d %d ",
905 						    port, j));
906 						bad_config = B_TRUE;
907 						break;
908 					}
909 				}
910 				if (bad_config == B_TRUE)
911 					break;
912 			}
913 		}
914 		if (bad_config == B_TRUE) {
915 			/* use default config */
916 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
917 			    " txdma-cfg property:"
918 			    " bad custom config:" " use default"));
919 
920 			for (port = 0; port < num_ports; port++) {
921 				custom_num_tdc[port] = (num_ports == 4) ?
922 				    p4_tx_fair[port] : p2_tx_fair[port];
923 				custom_start_tdc[port] = start_tdc;
924 				start_tdc += custom_num_tdc[port];
925 			}
926 		}
927 		break;
928 
929 	default:
930 		/* use default config */
931 		cfg_prop = "fair";
932 		for (port = 0; port < num_ports; port++) {
933 			custom_num_tdc[port] = (num_ports == 4) ?
934 			    p4_tx_fair[port] : p2_tx_fair[port];
935 			custom_start_tdc[port] = start_tdc;
936 			start_tdc += custom_num_tdc[port];
937 		}
938 		break;
939 	}
940 
941 	/* Now Update the tx properties */
942 	for (port = 0; port < num_ports; port++) {
943 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
944 		    " update property txdma-cfg with %s ", cfg_prop));
945 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
946 		    "txdma-cfg", cfg_prop);
947 		if (ddi_status != DDI_PROP_SUCCESS) {
948 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
949 			    " property txdma-cfg is not updating to %s",
950 			    cfg_prop));
951 			status |= NXGE_DDI_FAILED;
952 		}
953 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
954 		    num_tdc_prop, custom_num_tdc[port]));
955 
956 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
957 		    num_tdc_prop, custom_num_tdc[port]);
958 
959 		if (ddi_status != DDI_PROP_SUCCESS) {
960 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
961 			    " property %s not updating with %d",
962 			    num_tdc_prop,
963 			    custom_num_tdc[port]));
964 			status |= NXGE_DDI_FAILED;
965 		}
966 
967 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
968 		    start_tdc_prop, custom_start_tdc[port]));
969 
970 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
971 		    start_tdc_prop, custom_start_tdc[port]);
972 		if (ddi_status != DDI_PROP_SUCCESS) {
973 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
974 			    " property %s not updating with %d ",
975 			    start_tdc_prop, custom_start_tdc[port]));
976 			status |= NXGE_DDI_FAILED;
977 		}
978 	}
979 	if (status & NXGE_DDI_FAILED)
980 		status |= NXGE_ERROR;
981 	return (status);
982 }
983 
984 static nxge_status_t
985 nxge_update_cfg_properties(p_nxge_t nxgep, uint32_t flags,
986 	config_token_t token, dev_info_t *s_dip[])
987 {
988 	nxge_status_t status = NXGE_OK;
989 
990 	switch (flags) {
991 	case COMMON_TXDMA_CFG:
992 		if (nxge_dma_obp_props_only == 0)
993 			status = nxge_update_txdma_properties(nxgep,
994 			    token, s_dip);
995 		break;
996 	case COMMON_RXDMA_CFG:
997 		if (nxge_dma_obp_props_only == 0)
998 			status = nxge_update_rxdma_properties(nxgep,
999 			    token, s_dip);
1000 
1001 		break;
1002 	case COMMON_RXDMA_GRP_CFG:
1003 		status = nxge_update_rxdma_grp_properties(nxgep,
1004 		    token, s_dip);
1005 		break;
1006 	default:
1007 		return (NXGE_ERROR);
1008 	}
1009 	return (status);
1010 }
1011 
1012 /*
1013  * verify consistence.
1014  * (May require publishing the properties on all the ports.
1015  *
1016  * What if properties are published on function 0 device only?
1017  *
1018  *
1019  * rxdma-cfg, txdma-cfg, rxdma-grp-cfg (required )
1020  * What about class configs?
1021  *
1022  * If consistent, update the property on all the siblings.
1023  * set  a flag on hardware shared register
1024  * The rest of the siblings will check the flag
1025  * if the flag is set, they will use the updated property
1026  * without doing any validation.
1027  */
1028 
1029 nxge_status_t
1030 nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep, char *prop,
1031 	uint64_t known_cfg, uint32_t override, dev_info_t *c_dip[])
1032 {
1033 	nxge_status_t status = NXGE_OK;
1034 	int ddi_status = DDI_SUCCESS;
1035 	int i = 0, found = 0, update_prop = B_TRUE;
1036 	int *cfg_val;
1037 	uint_t new_value, cfg_value[MAX_SIBLINGS];
1038 	uint_t prop_len;
1039 	uint_t known_cfg_value;
1040 
1041 	known_cfg_value = (uint_t)known_cfg;
1042 
1043 	if (override == B_TRUE) {
1044 		new_value = known_cfg_value;
1045 		for (i = 0; i < nxgep->nports; i++) {
1046 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1047 			    c_dip[i], prop, new_value);
1048 #ifdef NXGE_DEBUG_ERROR
1049 			if (ddi_status != DDI_PROP_SUCCESS)
1050 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1051 				    " property %s failed update ", prop));
1052 #endif
1053 		}
1054 		if (ddi_status != DDI_PROP_SUCCESS)
1055 			return (NXGE_ERROR | NXGE_DDI_FAILED);
1056 	}
1057 	for (i = 0; i < nxgep->nports; i++) {
1058 		cfg_value[i] = known_cfg_value;
1059 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, c_dip[i], 0,
1060 		    prop, &cfg_val,
1061 		    &prop_len) == DDI_PROP_SUCCESS) {
1062 			cfg_value[i] = *cfg_val;
1063 			ddi_prop_free(cfg_val);
1064 			found++;
1065 		}
1066 	}
1067 
1068 	if (found != i) {
1069 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1070 		    " property %s not specified on all ports", prop));
1071 		if (found == 0) {
1072 			/* not specified: Use default */
1073 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1074 			    " property %s not specified on any port:"
1075 			    " Using default", prop));
1076 			new_value = known_cfg_value;
1077 		} else {
1078 			/* specified on some */
1079 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1080 			    " property %s not specified"
1081 			    " on some ports: Using default", prop));
1082 			/* ? use p0 value instead ? */
1083 			new_value = known_cfg_value;
1084 		}
1085 	} else {
1086 		/* check type and consistence */
1087 		/* found on all devices */
1088 		for (i = 1; i < found; i++) {
1089 			if (cfg_value[i] != cfg_value[i - 1]) {
1090 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1091 				    " property %s inconsistent:"
1092 				    " Using default", prop));
1093 				new_value = known_cfg_value;
1094 				break;
1095 			}
1096 			/*
1097 			 * Found on all the ports and consistent. Nothing to
1098 			 * do.
1099 			 */
1100 			update_prop = B_FALSE;
1101 		}
1102 	}
1103 
1104 	if (update_prop == B_TRUE) {
1105 		for (i = 0; i < nxgep->nports; i++) {
1106 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1107 			    c_dip[i], prop, new_value);
1108 #ifdef NXGE_DEBUG_ERROR
1109 			if (ddi_status != DDI_SUCCESS)
1110 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1111 				    " property %s not updating with %d"
1112 				    " Using default",
1113 				    prop, new_value));
1114 #endif
1115 			if (ddi_status != DDI_PROP_SUCCESS)
1116 				status |= NXGE_DDI_FAILED;
1117 		}
1118 	}
1119 	if (status & NXGE_DDI_FAILED)
1120 		status |= NXGE_ERROR;
1121 
1122 	return (status);
1123 }
1124 
1125 static uint64_t
1126 nxge_class_get_known_cfg(p_nxge_t nxgep, int class_prop, int rx_quick_cfg)
1127 {
1128 	int start_prop;
1129 	uint64_t cfg_value;
1130 	p_nxge_param_t param_arr;
1131 
1132 	param_arr = nxgep->param_arr;
1133 	cfg_value = param_arr[class_prop].value;
1134 	start_prop = param_h1_init_value;
1135 
1136 	/* update the properties per quick config */
1137 	switch (rx_quick_cfg) {
1138 	case CFG_L3_WEB:
1139 	case CFG_L3_DISTRIBUTE:
1140 		cfg_value = nxge_classify_get_cfg_value(nxgep,
1141 		    rx_quick_cfg, class_prop - start_prop);
1142 		break;
1143 	default:
1144 		cfg_value = param_arr[class_prop].value;
1145 		break;
1146 	}
1147 	return (cfg_value);
1148 }
1149 
1150 static nxge_status_t
1151 nxge_cfg_verify_set_classify(p_nxge_t nxgep, dev_info_t *c_dip[])
1152 {
1153 	nxge_status_t status = NXGE_OK;
1154 	int rx_quick_cfg, class_prop, start_prop, end_prop;
1155 	char *prop_name;
1156 	int override = B_TRUE;
1157 	uint64_t cfg_value;
1158 	p_nxge_param_t param_arr;
1159 
1160 	param_arr = nxgep->param_arr;
1161 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
1162 	start_prop = param_h1_init_value;
1163 	end_prop = param_class_opt_ipv6_sctp;
1164 
1165 	/* update the properties per quick config */
1166 	if (rx_quick_cfg == CFG_NOT_SPECIFIED)
1167 		override = B_FALSE;
1168 
1169 	/*
1170 	 * these parameter affect the classification outcome.
1171 	 * these parameters are used to configure the Flow key and
1172 	 * the TCAM key for each of the IP classes.
1173 	 * Included here are also the H1 and H2 initial values
1174 	 * which affect the distribution as well as final hash value
1175 	 * (hence the offset into RDC table and FCRAM bucket location)
1176 	 *
1177 	 */
1178 	for (class_prop = start_prop; class_prop <= end_prop; class_prop++) {
1179 		prop_name = param_arr[class_prop].fcode_name;
1180 		cfg_value = nxge_class_get_known_cfg(nxgep,
1181 		    class_prop, rx_quick_cfg);
1182 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1183 		    cfg_value, override, c_dip);
1184 	}
1185 
1186 	/*
1187 	 * these properties do not affect the actual classification outcome.
1188 	 * used to enable/disable or tune the fflp hardware
1189 	 *
1190 	 * fcram_access_ratio, tcam_access_ratio, tcam_enable, llc_snap_enable
1191 	 *
1192 	 */
1193 	override = B_FALSE;
1194 	for (class_prop = param_fcram_access_ratio;
1195 	    class_prop <= param_llc_snap_enable; class_prop++) {
1196 		prop_name = param_arr[class_prop].fcode_name;
1197 		cfg_value = param_arr[class_prop].value;
1198 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1199 		    cfg_value, override, c_dip);
1200 	}
1201 
1202 	return (status);
1203 }
1204 
1205 nxge_status_t
1206 nxge_cfg_verify_set(p_nxge_t nxgep, uint32_t flag)
1207 {
1208 	nxge_status_t status = NXGE_OK;
1209 	int i = 0, found = 0;
1210 	int num_siblings;
1211 	dev_info_t *c_dip[MAX_SIBLINGS + 1];
1212 	char *prop_val[MAX_SIBLINGS];
1213 	config_token_t c_token[MAX_SIBLINGS];
1214 	char *prop;
1215 
1216 	if (nxge_dma_obp_props_only)
1217 		return (NXGE_OK);
1218 
1219 	num_siblings = 0;
1220 	c_dip[num_siblings] = ddi_get_child(nxgep->p_dip);
1221 	while (c_dip[num_siblings]) {
1222 		c_dip[num_siblings + 1] =
1223 		    ddi_get_next_sibling(c_dip[num_siblings]);
1224 		num_siblings++;
1225 	}
1226 
1227 	switch (flag) {
1228 	case COMMON_TXDMA_CFG:
1229 		prop = "txdma-cfg";
1230 		break;
1231 	case COMMON_RXDMA_CFG:
1232 		prop = "rxdma-cfg";
1233 		break;
1234 	case COMMON_RXDMA_GRP_CFG:
1235 		prop = "rxdma-grp-cfg";
1236 		break;
1237 	case COMMON_CLASS_CFG:
1238 		status = nxge_cfg_verify_set_classify(nxgep, c_dip);
1239 		return (status);
1240 	default:
1241 		return (NXGE_ERROR);
1242 	}
1243 
1244 	i = 0;
1245 	while (i < num_siblings) {
1246 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, c_dip[i], 0, prop,
1247 		    (char **)&prop_val[i]) == DDI_PROP_SUCCESS) {
1248 			c_token[i] = nxge_get_config_token(prop_val[i]);
1249 			ddi_prop_free(prop_val[i]);
1250 			found++;
1251 		} else
1252 			c_token[i] = CONFIG_TOKEN_NONE;
1253 		i++;
1254 	}
1255 
1256 	if (found != i) {
1257 		if (found == 0) {
1258 			/* not specified: Use default */
1259 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1260 			    " property %s not specified on any port:"
1261 			    " Using default", prop));
1262 
1263 			status = nxge_update_cfg_properties(nxgep,
1264 			    flag, FAIR, c_dip);
1265 			return (status);
1266 		} else {
1267 			/*
1268 			 * if  the convention is to use function 0 device then
1269 			 * populate the other devices with this configuration.
1270 			 *
1271 			 * The other alternative is to use the default config.
1272 			 */
1273 			/* not specified: Use default */
1274 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1275 			    " property %s not specified on some ports:"
1276 			    " Using default", prop));
1277 			status = nxge_update_cfg_properties(nxgep,
1278 			    flag, FAIR, c_dip);
1279 			return (status);
1280 		}
1281 	}
1282 
1283 	/* check type and consistence */
1284 	/* found on all devices */
1285 	for (i = 1; i < found; i++) {
1286 		if (c_token[i] != c_token[i - 1]) {
1287 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1288 			    " property %s inconsistent:"
1289 			    " Using default", prop));
1290 			status = nxge_update_cfg_properties(nxgep,
1291 			    flag, FAIR, c_dip);
1292 			return (status);
1293 		}
1294 	}
1295 
1296 	/*
1297 	 * Found on all the ports check if it is custom configuration. if
1298 	 * custom, then verify consistence
1299 	 *
1300 	 * finally create soft properties
1301 	 */
1302 	status = nxge_update_cfg_properties(nxgep, flag, c_token[0], c_dip);
1303 	return (status);
1304 }
1305 
1306 nxge_status_t
1307 nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)
1308 {
1309 	nxge_status_t status = NXGE_OK;
1310 	int ddi_status = DDI_SUCCESS;
1311 	char *prop_val;
1312 	char *rx_prop;
1313 	char *prop;
1314 	uint32_t cfg_value = CFG_NOT_SPECIFIED;
1315 	p_nxge_param_t param_arr;
1316 
1317 	param_arr = nxgep->param_arr;
1318 	rx_prop = param_arr[param_rx_quick_cfg].fcode_name;
1319 
1320 	prop = "rx-quick-cfg";
1321 
1322 	/*
1323 	 * good value are
1324 	 *
1325 	 * "web-server" "generic-server" "l3-classify" "flow-classify"
1326 	 */
1327 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, nxgep->dip, 0,
1328 	    prop, (char **)&prop_val) != DDI_PROP_SUCCESS) {
1329 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1330 		    " property %s not specified: using default ", prop));
1331 		cfg_value = CFG_NOT_SPECIFIED;
1332 	} else {
1333 		cfg_value = CFG_L3_DISTRIBUTE;
1334 		if (strncmp("web-server", (caddr_t)prop_val, 8) == 0) {
1335 			cfg_value = CFG_L3_WEB;
1336 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1337 			    " %s: web server ", prop));
1338 		}
1339 		if (strncmp("generic-server", (caddr_t)prop_val, 8) == 0) {
1340 			cfg_value = CFG_L3_DISTRIBUTE;
1341 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1342 			    " %s: distribute ", prop));
1343 		}
1344 		/* more */
1345 		ddi_prop_free(prop_val);
1346 	}
1347 
1348 	ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1349 	    rx_prop, cfg_value);
1350 	if (ddi_status != DDI_PROP_SUCCESS)
1351 		status |= NXGE_DDI_FAILED;
1352 
1353 	/* now handle specified cases: */
1354 	if (status & NXGE_DDI_FAILED)
1355 		status |= NXGE_ERROR;
1356 	return (status);
1357 }
1358 
1359 /*
1360  * Device properties adv-autoneg-cap etc are defined by FWARC
1361  * http://sac.sfbay/FWARC/2002/345/20020610_asif.haswarey
1362  */
1363 static void
1364 nxge_use_cfg_link_cfg(p_nxge_t nxgep)
1365 {
1366 	int *prop_val;
1367 	uint_t prop_len;
1368 	dev_info_t *dip;
1369 	int speed;
1370 	int duplex;
1371 	int adv_autoneg_cap;
1372 	int adv_10gfdx_cap;
1373 	int adv_10ghdx_cap;
1374 	int adv_1000fdx_cap;
1375 	int adv_1000hdx_cap;
1376 	int adv_100fdx_cap;
1377 	int adv_100hdx_cap;
1378 	int adv_10fdx_cap;
1379 	int adv_10hdx_cap;
1380 	int status = DDI_SUCCESS;
1381 
1382 	dip = nxgep->dip;
1383 
1384 	/*
1385 	 * first find out the card type and the supported link speeds and
1386 	 * features
1387 	 */
1388 	/* add code for card type */
1389 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-autoneg-cap",
1390 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1391 		ddi_prop_free(prop_val);
1392 		return;
1393 	}
1394 
1395 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10gfdx-cap",
1396 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1397 		ddi_prop_free(prop_val);
1398 		return;
1399 	}
1400 
1401 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000hdx-cap",
1402 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1403 		ddi_prop_free(prop_val);
1404 		return;
1405 	}
1406 
1407 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000fdx-cap",
1408 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1409 		ddi_prop_free(prop_val);
1410 		return;
1411 	}
1412 
1413 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100fdx-cap",
1414 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1415 		ddi_prop_free(prop_val);
1416 		return;
1417 	}
1418 
1419 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100hdx-cap",
1420 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1421 		ddi_prop_free(prop_val);
1422 		return;
1423 	}
1424 
1425 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10fdx-cap",
1426 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1427 		ddi_prop_free(prop_val);
1428 		return;
1429 	}
1430 
1431 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10hdx-cap",
1432 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1433 		ddi_prop_free(prop_val);
1434 		return;
1435 	}
1436 
1437 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "speed",
1438 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1439 		if (strncmp("10000", (caddr_t)prop_val,
1440 		    (size_t)prop_len) == 0) {
1441 			speed = 10000;
1442 		} else if (strncmp("1000", (caddr_t)prop_val,
1443 		    (size_t)prop_len) == 0) {
1444 			speed = 1000;
1445 		} else if (strncmp("100", (caddr_t)prop_val,
1446 		    (size_t)prop_len) == 0) {
1447 			speed = 100;
1448 		} else if (strncmp("10", (caddr_t)prop_val,
1449 		    (size_t)prop_len) == 0) {
1450 			speed = 10;
1451 		} else if (strncmp("auto", (caddr_t)prop_val,
1452 		    (size_t)prop_len) == 0) {
1453 			speed = 0;
1454 		} else {
1455 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1456 			    "speed property is invalid reverting to auto"));
1457 			speed = 0;
1458 		}
1459 		ddi_prop_free(prop_val);
1460 	} else
1461 		speed = 0;
1462 
1463 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "duplex",
1464 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1465 		if (strncmp("full", (caddr_t)prop_val,
1466 		    (size_t)prop_len) == 0) {
1467 			duplex = 2;
1468 		} else if (strncmp("half", (caddr_t)prop_val,
1469 		    (size_t)prop_len) == 0) {
1470 			duplex = 1;
1471 		} else if (strncmp("auto", (caddr_t)prop_val,
1472 		    (size_t)prop_len) == 0) {
1473 			duplex = 0;
1474 		} else {
1475 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1476 			    "duplex property is invalid"
1477 			    " reverting to auto"));
1478 			duplex = 0;
1479 		}
1480 		ddi_prop_free(prop_val);
1481 	} else
1482 		duplex = 0;
1483 
1484 	/* speed == 0 or duplex == 0 means auto negotiation. */
1485 	adv_autoneg_cap = (speed == 0) || (duplex == 0);
1486 	if (adv_autoneg_cap == 0) {
1487 		adv_10gfdx_cap = ((speed == 10000) && (duplex == 2));
1488 		adv_10ghdx_cap = adv_10gfdx_cap;
1489 		adv_10ghdx_cap |= ((speed == 10000) && (duplex == 1));
1490 		adv_1000fdx_cap = adv_10ghdx_cap;
1491 		adv_1000fdx_cap |= ((speed == 1000) && (duplex == 2));
1492 		adv_1000hdx_cap = adv_1000fdx_cap;
1493 		adv_1000hdx_cap |= ((speed == 1000) && (duplex == 1));
1494 		adv_100fdx_cap = adv_1000hdx_cap;
1495 		adv_100fdx_cap |= ((speed == 100) && (duplex == 2));
1496 		adv_100hdx_cap = adv_100fdx_cap;
1497 		adv_100hdx_cap |= ((speed == 100) && (duplex == 1));
1498 		adv_10fdx_cap = adv_100hdx_cap;
1499 		adv_10fdx_cap |= ((speed == 10) && (duplex == 2));
1500 		adv_10hdx_cap = adv_10fdx_cap;
1501 		adv_10hdx_cap |= ((speed == 10) && (duplex == 1));
1502 	} else if (speed == 0) {
1503 		adv_10gfdx_cap = (duplex == 2);
1504 		adv_10ghdx_cap = (duplex == 1);
1505 		adv_1000fdx_cap = (duplex == 2);
1506 		adv_1000hdx_cap = (duplex == 1);
1507 		adv_100fdx_cap = (duplex == 2);
1508 		adv_100hdx_cap = (duplex == 1);
1509 		adv_10fdx_cap = (duplex == 2);
1510 		adv_10hdx_cap = (duplex == 1);
1511 	}
1512 	if (duplex == 0) {
1513 		adv_10gfdx_cap = (speed == 0);
1514 		adv_10gfdx_cap |= (speed == 10000);
1515 		adv_10ghdx_cap = adv_10gfdx_cap;
1516 		adv_10ghdx_cap |= (speed == 10000);
1517 		adv_1000fdx_cap = adv_10ghdx_cap;
1518 		adv_1000fdx_cap |= (speed == 1000);
1519 		adv_1000hdx_cap = adv_1000fdx_cap;
1520 		adv_1000hdx_cap |= (speed == 1000);
1521 		adv_100fdx_cap = adv_1000hdx_cap;
1522 		adv_100fdx_cap |= (speed == 100);
1523 		adv_100hdx_cap = adv_100fdx_cap;
1524 		adv_100hdx_cap |= (speed == 100);
1525 		adv_10fdx_cap = adv_100hdx_cap;
1526 		adv_10fdx_cap |= (speed == 10);
1527 		adv_10hdx_cap = adv_10fdx_cap;
1528 		adv_10hdx_cap |= (speed == 10);
1529 	}
1530 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1531 	    "adv-autoneg-cap", &adv_autoneg_cap, 1);
1532 	if (status)
1533 		return;
1534 
1535 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1536 	    "adv-10gfdx-cap", &adv_10gfdx_cap, 1);
1537 	if (status)
1538 		goto nxge_map_myargs_to_gmii_fail1;
1539 
1540 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1541 	    "adv-10ghdx-cap", &adv_10ghdx_cap, 1);
1542 	if (status)
1543 		goto nxge_map_myargs_to_gmii_fail2;
1544 
1545 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1546 	    "adv-1000fdx-cap", &adv_1000fdx_cap, 1);
1547 	if (status)
1548 		goto nxge_map_myargs_to_gmii_fail3;
1549 
1550 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1551 	    "adv-1000hdx-cap", &adv_1000hdx_cap, 1);
1552 	if (status)
1553 		goto nxge_map_myargs_to_gmii_fail4;
1554 
1555 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1556 	    "adv-100fdx-cap", &adv_100fdx_cap, 1);
1557 	if (status)
1558 		goto nxge_map_myargs_to_gmii_fail5;
1559 
1560 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1561 	    "adv-100hdx-cap", &adv_100hdx_cap, 1);
1562 	if (status)
1563 		goto nxge_map_myargs_to_gmii_fail6;
1564 
1565 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1566 	    "adv-10fdx-cap", &adv_10fdx_cap, 1);
1567 	if (status)
1568 		goto nxge_map_myargs_to_gmii_fail7;
1569 
1570 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1571 	    "adv-10hdx-cap", &adv_10hdx_cap, 1);
1572 	if (status)
1573 		goto nxge_map_myargs_to_gmii_fail8;
1574 
1575 	return;
1576 
1577 nxge_map_myargs_to_gmii_fail9:
1578 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10hdx-cap");
1579 
1580 nxge_map_myargs_to_gmii_fail8:
1581 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10fdx-cap");
1582 
1583 nxge_map_myargs_to_gmii_fail7:
1584 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100hdx-cap");
1585 
1586 nxge_map_myargs_to_gmii_fail6:
1587 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100fdx-cap");
1588 
1589 nxge_map_myargs_to_gmii_fail5:
1590 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000hdx-cap");
1591 
1592 nxge_map_myargs_to_gmii_fail4:
1593 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000fdx-cap");
1594 
1595 nxge_map_myargs_to_gmii_fail3:
1596 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10ghdx-cap");
1597 
1598 nxge_map_myargs_to_gmii_fail2:
1599 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10gfdx-cap");
1600 
1601 nxge_map_myargs_to_gmii_fail1:
1602 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-autoneg-cap");
1603 }
1604 
1605 nxge_status_t
1606 nxge_get_config_properties(p_nxge_t nxgep)
1607 {
1608 	nxge_status_t status = NXGE_OK;
1609 	p_nxge_hw_list_t hw_p;
1610 
1611 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " ==> nxge_get_config_properties"));
1612 
1613 	if ((hw_p = nxgep->nxge_hw_p) == NULL) {
1614 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1615 		    " nxge_get_config_properties:"
1616 		    " common hardware not set", nxgep->niu_type));
1617 		return (NXGE_ERROR);
1618 	}
1619 
1620 	/*
1621 	 * Get info on how many ports Neptune card has.
1622 	 */
1623 	nxgep->nports = nxge_get_nports(nxgep);
1624 	if (nxgep->nports <= 0) {
1625 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1626 		    "<==nxge_get_config_properties: Invalid Neptune type 0x%x",
1627 		    nxgep->niu_type));
1628 		return (NXGE_ERROR);
1629 	}
1630 	nxgep->classifier.tcam_size = TCAM_NIU_TCAM_MAX_ENTRY;
1631 	if (NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1632 		nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1633 	}
1634 	if (nxgep->function_num >= nxgep->nports) {
1635 		return (NXGE_ERROR);
1636 	}
1637 
1638 	status = nxge_get_mac_addr_properties(nxgep);
1639 	if (status != NXGE_OK)
1640 		return (NXGE_ERROR);
1641 
1642 	/*
1643 	 * read the configuration type. If none is specified, used default.
1644 	 * Config types: equal: (default) DMA channels, RDC groups, TCAM, FCRAM
1645 	 * are shared equally across all the ports.
1646 	 *
1647 	 * Fair: DMA channels, RDC groups, TCAM, FCRAM are shared proportional
1648 	 * to the port speed.
1649 	 *
1650 	 *
1651 	 * custom: DMA channels, RDC groups, TCAM, FCRAM partition is
1652 	 * specified in nxge.conf. Need to read each parameter and set
1653 	 * up the parameters in nxge structures.
1654 	 *
1655 	 */
1656 	switch (nxgep->niu_type) {
1657 	case N2_NIU:
1658 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1659 		    " ==> nxge_get_config_properties: N2"));
1660 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1661 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1662 		    COMMON_CFG_VALID) {
1663 			status = nxge_cfg_verify_set(nxgep,
1664 			    COMMON_RXDMA_GRP_CFG);
1665 			status = nxge_cfg_verify_set(nxgep,
1666 			    COMMON_CLASS_CFG);
1667 			hw_p->flags |= COMMON_CFG_VALID;
1668 		}
1669 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1670 		status = nxge_use_cfg_n2niu_properties(nxgep);
1671 		break;
1672 	default:
1673 		if (!NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1674 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1675 			    " nxge_get_config_properties:"
1676 			    " unknown NIU type 0x%x", nxgep->niu_type));
1677 			return (NXGE_ERROR);
1678 		}
1679 
1680 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1681 		    " ==> nxge_get_config_properties: Neptune"));
1682 		status = nxge_cfg_verify_set_quick_config(nxgep);
1683 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1684 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1685 		    COMMON_CFG_VALID) {
1686 			status = nxge_cfg_verify_set(nxgep,
1687 			    COMMON_TXDMA_CFG);
1688 			status = nxge_cfg_verify_set(nxgep,
1689 			    COMMON_RXDMA_CFG);
1690 			status = nxge_cfg_verify_set(nxgep,
1691 			    COMMON_RXDMA_GRP_CFG);
1692 			status = nxge_cfg_verify_set(nxgep,
1693 			    COMMON_CLASS_CFG);
1694 			hw_p->flags |= COMMON_CFG_VALID;
1695 		}
1696 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1697 		nxge_use_cfg_neptune_properties(nxgep);
1698 		status = NXGE_OK;
1699 		break;
1700 	}
1701 
1702 	/*
1703 	 * Get the software LSO enable flag property from the
1704 	 * driver configuration file (nxge.conf).
1705 	 * This flag will be set to disable (0) if this property
1706 	 * does not exist.
1707 	 */
1708 	nxgep->soft_lso_enable = ddi_prop_get_int(DDI_DEV_T_ANY, nxgep->dip,
1709 	    DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "soft-lso-enable", 0);
1710 	NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1711 	    "nxge_get_config_properties: software lso %d\n",
1712 	    nxgep->soft_lso_enable));
1713 
1714 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " <== nxge_get_config_properties"));
1715 	return (status);
1716 }
1717 
1718 static nxge_status_t
1719 nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)
1720 {
1721 	nxge_status_t status = NXGE_OK;
1722 
1723 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_n2niu_properties"));
1724 
1725 	status = nxge_use_default_dma_config_n2(nxgep);
1726 	if (status != NXGE_OK) {
1727 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1728 		    " ==> nxge_use_cfg_n2niu_properties (err 0x%x)",
1729 		    status));
1730 		return (status | NXGE_ERROR);
1731 	}
1732 
1733 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1734 	(void) nxge_use_cfg_mac_class_config(nxgep);
1735 	(void) nxge_use_cfg_class_config(nxgep);
1736 	(void) nxge_use_cfg_link_cfg(nxgep);
1737 
1738 	/*
1739 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1740 	 * each property.
1741 	 */
1742 	(void) nxge_get_param_soft_properties(nxgep);
1743 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_n2niu_properties"));
1744 
1745 	return (status);
1746 }
1747 
1748 static void
1749 nxge_use_cfg_neptune_properties(p_nxge_t nxgep)
1750 {
1751 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_neptune_properties"));
1752 
1753 	(void) nxge_use_cfg_dma_config(nxgep);
1754 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1755 	(void) nxge_use_cfg_mac_class_config(nxgep);
1756 	(void) nxge_use_cfg_class_config(nxgep);
1757 	(void) nxge_use_cfg_link_cfg(nxgep);
1758 
1759 	/*
1760 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1761 	 * each property.
1762 	 */
1763 	(void) nxge_get_param_soft_properties(nxgep);
1764 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_neptune_properties"));
1765 }
1766 
1767 /*
1768  * FWARC 2006/556
1769  */
1770 
1771 static nxge_status_t
1772 nxge_use_default_dma_config_n2(p_nxge_t nxgep)
1773 {
1774 	int ndmas;
1775 	uint8_t func;
1776 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1777 	p_nxge_hw_pt_cfg_t p_cfgp;
1778 	int *prop_val;
1779 	uint_t prop_len;
1780 	int i;
1781 	nxge_status_t status = NXGE_OK;
1782 
1783 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2"));
1784 
1785 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1786 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1787 
1788 	func = nxgep->function_num;
1789 	p_cfgp->function_number = func;
1790 	ndmas = NXGE_TDMA_PER_NIU_PORT;
1791 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1792 	    "tx-dma-channels", (int **)&prop_val,
1793 	    &prop_len) == DDI_PROP_SUCCESS) {
1794 		p_cfgp->tdc.start = prop_val[0];
1795 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1796 		    "==> nxge_use_default_dma_config_n2: tdc starts %d "
1797 		    "(#%d)", p_cfgp->tdc.start, prop_len));
1798 
1799 		ndmas = prop_val[1];
1800 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1801 		    "==> nxge_use_default_dma_config_n2: #tdc %d (#%d)",
1802 		    ndmas, prop_len));
1803 		ddi_prop_free(prop_val);
1804 	} else {
1805 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1806 		    "==> nxge_use_default_dma_config_n2: "
1807 		    "get tx-dma-channels failed"));
1808 		return (NXGE_DDI_FAILED);
1809 	}
1810 
1811 	p_cfgp->tdc.count = nxgep->max_tdcs = ndmas;
1812 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
1813 
1814 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1815 	    "p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d start %d",
1816 	    p_cfgp, p_cfgp->tdc.count, nxgep->max_tdcs, p_cfgp->tdc.start));
1817 
1818 	/* Receive DMA */
1819 	ndmas = NXGE_RDMA_PER_NIU_PORT;
1820 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1821 	    "rx-dma-channels", (int **)&prop_val,
1822 	    &prop_len) == DDI_PROP_SUCCESS) {
1823 		p_cfgp->start_rdc = prop_val[0];
1824 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1825 		    "==> nxge_use_default_dma_config_n2(obp): rdc start %d"
1826 		    " (#%d)", p_cfgp->start_rdc, prop_len));
1827 		ndmas = prop_val[1];
1828 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1829 		    "==> nxge_use_default_dma_config_n2(obp):#rdc %d (#%d)",
1830 		    ndmas, prop_len));
1831 		ddi_prop_free(prop_val);
1832 	} else {
1833 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1834 		    "==> nxge_use_default_dma_config_n2: "
1835 		    "get rx-dma-channel failed"));
1836 		return (NXGE_DDI_FAILED);
1837 	}
1838 
1839 	p_cfgp->max_rdcs = nxgep->max_rdcs = ndmas;
1840 	nxgep->rdc_mask = (ndmas - 1);
1841 
1842 	/* Hypervisor: rdc # and group # use the same # !! */
1843 	p_cfgp->max_grpids = p_cfgp->max_rdcs + p_cfgp->tdc.owned;
1844 	p_cfgp->start_grpid = 0;
1845 	p_cfgp->mif_ldvid = p_cfgp->mac_ldvid = p_cfgp->ser_ldvid = 0;
1846 
1847 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1848 	    "interrupts", (int **)&prop_val,
1849 	    &prop_len) == DDI_PROP_SUCCESS) {
1850 		/*
1851 		 * For each device assigned, the content of each interrupts
1852 		 * property is its logical device group.
1853 		 *
1854 		 * Assignment of interrupts property is in the the following
1855 		 * order:
1856 		 *
1857 		 * MAC MIF (if configured) SYSTEM ERROR (if configured) first
1858 		 * receive channel next channel...... last receive channel
1859 		 * first transmit channel next channel...... last transmit
1860 		 * channel
1861 		 *
1862 		 * prop_len should be at least for one mac and total # of rx and
1863 		 * tx channels. Function 0 owns MIF and ERROR
1864 		 */
1865 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1866 		    "==> nxge_use_default_dma_config_n2(obp): "
1867 		    "# interrupts %d", prop_len));
1868 
1869 		switch (func) {
1870 		case 0:
1871 			p_cfgp->ldg_chn_start = 3;
1872 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT0;
1873 			p_cfgp->mif_ldvid = NXGE_MIF_LD;
1874 			p_cfgp->ser_ldvid = NXGE_SYS_ERROR_LD;
1875 
1876 			break;
1877 		case 1:
1878 			p_cfgp->ldg_chn_start = 1;
1879 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT1;
1880 
1881 			break;
1882 		default:
1883 			status = NXGE_DDI_FAILED;
1884 			break;
1885 		}
1886 
1887 		if (status != NXGE_OK)
1888 			return (status);
1889 
1890 		for (i = 0; i < prop_len; i++) {
1891 			p_cfgp->ldg[i] = prop_val[i];
1892 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1893 			    "==> nxge_use_default_dma_config_n2(obp): "
1894 			    "F%d: interrupt #%d, ldg %d",
1895 			    nxgep->function_num, i, p_cfgp->ldg[i]));
1896 		}
1897 
1898 		p_cfgp->max_grpids = prop_len;
1899 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1900 		    "==> nxge_use_default_dma_config_n2(obp): %d "
1901 		    "(#%d) maxgrpids %d channel starts %d",
1902 		    p_cfgp->mac_ldvid, i, p_cfgp->max_grpids,
1903 		    p_cfgp->ldg_chn_start));
1904 		ddi_prop_free(prop_val);
1905 	} else {
1906 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1907 		    "==> nxge_use_default_dma_config_n2: "
1908 		    "get interrupts failed"));
1909 		return (NXGE_DDI_FAILED);
1910 	}
1911 
1912 	p_cfgp->max_ldgs = p_cfgp->max_grpids;
1913 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1914 	    "==> nxge_use_default_dma_config_n2: "
1915 	    "p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
1916 	    "start_grpid %d macid %d mifid %d serrid %d",
1917 	    p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
1918 	    p_cfgp->start_grpid,
1919 	    p_cfgp->mac_ldvid, p_cfgp->mif_ldvid, p_cfgp->ser_ldvid));
1920 
1921 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1922 	    "p_cfgp p%p start_ldg %d nxgep->max_ldgs %d",
1923 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs));
1924 
1925 	/*
1926 	 * RDC groups and the beginning RDC group assigned to this function.
1927 	 */
1928 	p_cfgp->max_rdc_grpids = 1;
1929 	p_cfgp->def_mac_rxdma_grpid = (nxgep->function_num * 1);
1930 
1931 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind
1932 	    (nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE))
1933 	    >= NXGE_MAX_RDC_GRPS) {
1934 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
1935 		    "nxge_use_default_dma_config_n2(): "
1936 		    "nxge_fzc_rdc_tbl_bind failed"));
1937 		return (NXGE_DDI_FAILED);
1938 	}
1939 
1940 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1941 	    "rx-rdc-grps", p_cfgp->max_rdc_grpids);
1942 	if (status) {
1943 		return (NXGE_DDI_FAILED);
1944 	}
1945 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1946 	    "rx-rdc-grps-begin", p_cfgp->def_mac_rxdma_grpid);
1947 	if (status) {
1948 		(void) ddi_prop_remove(DDI_DEV_T_NONE, nxgep->dip,
1949 		    "rx-rdc-grps");
1950 		return (NXGE_DDI_FAILED);
1951 	}
1952 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1953 	    "p_cfgp $%p # rdc groups %d start rdc group id %d",
1954 	    p_cfgp, p_cfgp->max_rdc_grpids,
1955 	    p_cfgp->def_mac_rxdma_grpid));
1956 
1957 	nxge_set_hw_dma_config(nxgep);
1958 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "<== nxge_use_default_dma_config_n2"));
1959 	return (status);
1960 }
1961 
1962 static void
1963 nxge_use_cfg_dma_config(p_nxge_t nxgep)
1964 {
1965 	int tx_ndmas, rx_ndmas, nrxgp, st_txdma, st_rxdma;
1966 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1967 	p_nxge_hw_pt_cfg_t p_cfgp;
1968 	dev_info_t *dip;
1969 	p_nxge_param_t param_arr;
1970 	char *prop;
1971 	int *prop_val;
1972 	uint_t prop_len;
1973 	int i;
1974 	uint8_t *ch_arr_p;
1975 
1976 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_dma_config"));
1977 	param_arr = nxgep->param_arr;
1978 
1979 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1980 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1981 	dip = nxgep->dip;
1982 	p_cfgp->function_number = nxgep->function_num;
1983 	prop = param_arr[param_txdma_channels_begin].fcode_name;
1984 
1985 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
1986 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1987 		p_cfgp->tdc.start = *prop_val;
1988 		ddi_prop_free(prop_val);
1989 	} else {
1990 		switch (nxgep->niu_type) {
1991 		case NEPTUNE_4_1GC:
1992 			ch_arr_p = &tx_4_1G[0];
1993 			break;
1994 		case NEPTUNE_2_10GF:
1995 			ch_arr_p = &tx_2_10G[0];
1996 			break;
1997 		case NEPTUNE_2_10GF_2_1GC:
1998 		case NEPTUNE_2_10GF_2_1GRF:
1999 			ch_arr_p = &tx_2_10G_2_1G[0];
2000 			break;
2001 		case NEPTUNE_1_10GF_3_1GC:
2002 			ch_arr_p = &tx_1_10G_3_1G[0];
2003 			break;
2004 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2005 			ch_arr_p = &tx_1_1G_1_10G_2_1G[0];
2006 			break;
2007 		default:
2008 			switch (nxgep->platform_type) {
2009 			case P_NEPTUNE_ALONSO:
2010 				ch_arr_p = &tx_2_10G_2_1G[0];
2011 				break;
2012 			default:
2013 				ch_arr_p = &p4_tx_equal[0];
2014 				break;
2015 			}
2016 			break;
2017 		}
2018 		st_txdma = 0;
2019 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2020 			st_txdma += *ch_arr_p;
2021 
2022 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2023 		    prop, st_txdma);
2024 		p_cfgp->tdc.start = st_txdma;
2025 	}
2026 
2027 	prop = param_arr[param_txdma_channels].fcode_name;
2028 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2029 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2030 		tx_ndmas = *prop_val;
2031 		ddi_prop_free(prop_val);
2032 	} else {
2033 		switch (nxgep->niu_type) {
2034 		case NEPTUNE_4_1GC:
2035 			tx_ndmas = tx_4_1G[nxgep->function_num];
2036 			break;
2037 		case NEPTUNE_2_10GF:
2038 			tx_ndmas = tx_2_10G[nxgep->function_num];
2039 			break;
2040 		case NEPTUNE_2_10GF_2_1GC:
2041 		case NEPTUNE_2_10GF_2_1GRF:
2042 			tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2043 			break;
2044 		case NEPTUNE_1_10GF_3_1GC:
2045 			tx_ndmas = tx_1_10G_3_1G[nxgep->function_num];
2046 			break;
2047 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2048 			tx_ndmas = tx_1_1G_1_10G_2_1G[nxgep->function_num];
2049 			break;
2050 		default:
2051 			switch (nxgep->platform_type) {
2052 			case P_NEPTUNE_ALONSO:
2053 				tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2054 				break;
2055 			default:
2056 				tx_ndmas = p4_tx_equal[nxgep->function_num];
2057 				break;
2058 			}
2059 			break;
2060 		}
2061 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2062 		    prop, tx_ndmas);
2063 	}
2064 
2065 	p_cfgp->tdc.count = nxgep->max_tdcs = tx_ndmas;
2066 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
2067 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2068 	    "p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d",
2069 	    p_cfgp, p_cfgp->tdc.count, nxgep->max_tdcs));
2070 
2071 	prop = param_arr[param_rxdma_channels_begin].fcode_name;
2072 
2073 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2074 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2075 		p_cfgp->start_rdc = *prop_val;
2076 		ddi_prop_free(prop_val);
2077 	} else {
2078 		switch (nxgep->niu_type) {
2079 		case NEPTUNE_4_1GC:
2080 			ch_arr_p = &rx_4_1G[0];
2081 			break;
2082 		case NEPTUNE_2_10GF:
2083 			ch_arr_p = &rx_2_10G[0];
2084 			break;
2085 		case NEPTUNE_2_10GF_2_1GC:
2086 		case NEPTUNE_2_10GF_2_1GRF:
2087 			ch_arr_p = &rx_2_10G_2_1G[0];
2088 			break;
2089 		case NEPTUNE_1_10GF_3_1GC:
2090 			ch_arr_p = &rx_1_10G_3_1G[0];
2091 			break;
2092 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2093 			ch_arr_p = &rx_1_1G_1_10G_2_1G[0];
2094 			break;
2095 		default:
2096 			switch (nxgep->platform_type) {
2097 			case P_NEPTUNE_ALONSO:
2098 				ch_arr_p = &rx_2_10G_2_1G[0];
2099 				break;
2100 			default:
2101 				ch_arr_p = &p4_rx_equal[0];
2102 				break;
2103 			}
2104 			break;
2105 		}
2106 		st_rxdma = 0;
2107 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2108 			st_rxdma += *ch_arr_p;
2109 
2110 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2111 		    prop, st_rxdma);
2112 		p_cfgp->start_rdc = st_rxdma;
2113 	}
2114 
2115 	prop = param_arr[param_rxdma_channels].fcode_name;
2116 
2117 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2118 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2119 		rx_ndmas = *prop_val;
2120 		ddi_prop_free(prop_val);
2121 	} else {
2122 		switch (nxgep->niu_type) {
2123 		case NEPTUNE_4_1GC:
2124 			rx_ndmas = rx_4_1G[nxgep->function_num];
2125 			break;
2126 		case NEPTUNE_2_10GF:
2127 			rx_ndmas = rx_2_10G[nxgep->function_num];
2128 			break;
2129 		case NEPTUNE_2_10GF_2_1GC:
2130 		case NEPTUNE_2_10GF_2_1GRF:
2131 			rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2132 			break;
2133 		case NEPTUNE_1_10GF_3_1GC:
2134 			rx_ndmas = rx_1_10G_3_1G[nxgep->function_num];
2135 			break;
2136 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2137 			rx_ndmas = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2138 			break;
2139 		default:
2140 			switch (nxgep->platform_type) {
2141 			case P_NEPTUNE_ALONSO:
2142 				rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2143 				break;
2144 			default:
2145 				rx_ndmas = p4_rx_equal[nxgep->function_num];
2146 				break;
2147 			}
2148 			break;
2149 		}
2150 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2151 		    prop, rx_ndmas);
2152 	}
2153 
2154 	p_cfgp->max_rdcs = nxgep->max_rdcs = rx_ndmas;
2155 
2156 	prop = param_arr[param_rdc_grps_start].fcode_name;
2157 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2158 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2159 		p_cfgp->def_mac_rxdma_grpid = *prop_val;
2160 		ddi_prop_free(prop_val);
2161 		if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind
2162 		    (nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE))
2163 		    >= NXGE_MAX_RDC_GRPS) {
2164 			NXGE_ERROR_MSG((nxgep, CFG_CTL,
2165 			    "nxge_use_cfg_dma_config(): "
2166 			    "nxge_fzc_rdc_tbl_bind failed"));
2167 			cmn_err(CE_CONT, "nxge%d: group not available!\n",
2168 			    nxgep->instance);
2169 			goto nxge_use_cfg_dma_config_exit;
2170 		}
2171 
2172 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2173 		    "==> nxge_use_default_dma_config: "
2174 		    "use property " "start_grpid %d ",
2175 		    p_cfgp->start_grpid));
2176 	} else {
2177 		p_cfgp->def_mac_rxdma_grpid = nxgep->function_num;
2178 		if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(
2179 		    nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >=
2180 		    NXGE_MAX_RDC_GRPS) {
2181 			cmn_err(CE_CONT, "nxge%d: group not available!\n",
2182 			    nxgep->instance);
2183 			goto nxge_use_cfg_dma_config_exit;
2184 		}
2185 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2186 		    prop, p_cfgp->def_mac_rxdma_grpid);
2187 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2188 		    "==> nxge_use_default_dma_config: "
2189 		    "use default "
2190 		    "start_grpid %d (same as function #)",
2191 		    p_cfgp->start_grpid));
2192 	}
2193 
2194 	prop = param_arr[param_rx_rdc_grps].fcode_name;
2195 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2196 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2197 		nrxgp = *prop_val;
2198 		ddi_prop_free(prop_val);
2199 	} else {
2200 		nrxgp = 1;
2201 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2202 		    prop, nrxgp);
2203 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2204 		    "==> nxge_use_default_dma_config: "
2205 		    "num_rdc_grpid not found: use def:# of "
2206 		    "rdc groups %d\n", nrxgp));
2207 	}
2208 
2209 	p_cfgp->max_rdc_grpids = nrxgp;
2210 
2211 	/*
2212 	 * 2/4 ports have the same hard-wired logical groups assigned.
2213 	 */
2214 	p_cfgp->start_ldg = nxgep->function_num * NXGE_LDGRP_PER_4PORTS;
2215 	p_cfgp->max_ldgs = NXGE_LDGRP_PER_4PORTS;
2216 
2217 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_default_dma_config: "
2218 	    "p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
2219 	    "start_grpid %d",
2220 	    p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
2221 	    p_cfgp->start_grpid));
2222 
2223 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2224 	    "p_cfgp 0x%016llx start_ldg %d nxgep->max_ldgs %d "
2225 	    "def_mac_rxdma_grpid %d",
2226 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs,
2227 	    p_cfgp->def_mac_rxdma_grpid));
2228 
2229 	prop = param_arr[param_rxdma_intr_time].fcode_name;
2230 
2231 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2232 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2233 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2234 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2235 			    nxgep->dip, prop, prop_val, prop_len);
2236 		}
2237 		ddi_prop_free(prop_val);
2238 	}
2239 	prop = param_arr[param_rxdma_intr_pkts].fcode_name;
2240 
2241 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2242 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2243 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2244 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2245 			    nxgep->dip, prop, prop_val, prop_len);
2246 		}
2247 		ddi_prop_free(prop_val);
2248 	}
2249 	nxge_set_hw_dma_config(nxgep);
2250 
2251 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config: "
2252 	    "sTDC[%d] nTDC[%d] sRDC[%d] nRDC[%d]",
2253 	    p_cfgp->tdc.start, p_cfgp->tdc.count,
2254 	    p_cfgp->start_rdc, p_cfgp->max_rdcs));
2255 
2256 nxge_use_cfg_dma_config_exit:
2257 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config"));
2258 }
2259 
2260 void
2261 nxge_get_logical_props(p_nxge_t nxgep)
2262 {
2263 	nxge_dma_pt_cfg_t *port = &nxgep->pt_config;
2264 	nxge_hw_pt_cfg_t *hardware;
2265 	nxge_rdc_grp_t *group;
2266 
2267 	(void) memset(port, 0, sizeof (*port));
2268 
2269 	port->mac_port = 0;	/* := function number */
2270 
2271 	/*
2272 	 * alloc_buf_size:
2273 	 * dead variables.
2274 	 */
2275 	port->rbr_size = nxge_rbr_size;
2276 	port->rcr_size = nxge_rcr_size;
2277 
2278 	port->tx_dma_map = 0;	/* Transmit DMA channel bit map */
2279 
2280 	nxge_set_rdc_intr_property(nxgep);
2281 
2282 	port->rcr_full_header = NXGE_RCR_FULL_HEADER;
2283 	port->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2284 
2285 	/* ----------------------------------------------------- */
2286 	hardware = &port->hw_config;
2287 
2288 	(void) memset(hardware, 0, sizeof (*hardware));
2289 
2290 	/*
2291 	 * partition_id, read_write_mode:
2292 	 * dead variables.
2293 	 */
2294 
2295 	/*
2296 	 * drr_wt, rx_full_header, *_ldg?, start_mac_entry,
2297 	 * mac_pref, def_mac_rxdma_grpid, start_vlan, max_vlans,
2298 	 * start_ldgs, max_ldgs, max_ldvs,
2299 	 * vlan_pref, def_vlan_rxdma_grpid are meaningful only
2300 	 * in the service domain.
2301 	 */
2302 
2303 	group = &port->rdc_grps[0];
2304 
2305 	group->flag = 1;	/* configured */
2306 	group->config_method = RDC_TABLE_ENTRY_METHOD_REP;
2307 
2308 	/* HIO futures: this is still an open question. */
2309 	hardware->max_macs = 1;
2310 }
2311 
2312 static void
2313 nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)
2314 {
2315 	uint_t vlan_cnt;
2316 	int *vlan_cfg_val;
2317 	int status;
2318 	p_nxge_param_t param_arr;
2319 	char *prop;
2320 
2321 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_vlan_config"));
2322 	param_arr = nxgep->param_arr;
2323 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2324 
2325 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2326 	    &vlan_cfg_val, &vlan_cnt);
2327 	if (status == DDI_PROP_SUCCESS) {
2328 		status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2329 		    nxgep->dip, prop, vlan_cfg_val, vlan_cnt);
2330 		ddi_prop_free(vlan_cfg_val);
2331 	}
2332 	nxge_set_hw_vlan_class_config(nxgep);
2333 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_vlan_config"));
2334 }
2335 
2336 static void
2337 nxge_use_cfg_mac_class_config(p_nxge_t nxgep)
2338 {
2339 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2340 	p_nxge_hw_pt_cfg_t p_cfgp;
2341 	uint_t mac_cnt;
2342 	int *mac_cfg_val;
2343 	int status;
2344 	p_nxge_param_t param_arr;
2345 	char *prop;
2346 
2347 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_mac_class_config"));
2348 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2349 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2350 	p_cfgp->start_mac_entry = 0;
2351 	param_arr = nxgep->param_arr;
2352 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2353 
2354 	switch (nxgep->function_num) {
2355 	case 0:
2356 	case 1:
2357 		/* 10G ports */
2358 		p_cfgp->max_macs = NXGE_MAX_MACS_XMACS;
2359 		break;
2360 	case 2:
2361 	case 3:
2362 		/* 1G ports */
2363 	default:
2364 		p_cfgp->max_macs = NXGE_MAX_MACS_BMACS;
2365 		break;
2366 	}
2367 
2368 	p_cfgp->mac_pref = 1;
2369 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2370 	    "== nxge_use_cfg_mac_class_config: "
2371 	    " mac_pref bit set def_mac_rxdma_grpid %d",
2372 	    p_cfgp->def_mac_rxdma_grpid));
2373 
2374 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2375 	    &mac_cfg_val, &mac_cnt);
2376 	if (status == DDI_PROP_SUCCESS) {
2377 		if (mac_cnt <= p_cfgp->max_macs)
2378 			status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2379 			    nxgep->dip, prop, mac_cfg_val, mac_cnt);
2380 		ddi_prop_free(mac_cfg_val);
2381 	}
2382 	nxge_set_hw_mac_class_config(nxgep);
2383 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_mac_class_config"));
2384 }
2385 
2386 static void
2387 nxge_use_cfg_class_config(p_nxge_t nxgep)
2388 {
2389 	nxge_set_hw_class_config(nxgep);
2390 }
2391 
2392 static void
2393 nxge_set_rdc_intr_property(p_nxge_t nxgep)
2394 {
2395 	int i;
2396 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2397 
2398 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_rdc_intr_property"));
2399 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2400 
2401 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2402 		p_dma_cfgp->rcr_timeout[i] = nxge_rcr_timeout;
2403 		p_dma_cfgp->rcr_threshold[i] = nxge_rcr_threshold;
2404 	}
2405 
2406 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_rdc_intr_property"));
2407 }
2408 
2409 static void
2410 nxge_set_hw_dma_config(p_nxge_t nxgep)
2411 {
2412 	int i, ndmas, ngrps, bitmap, end, st_rdc;
2413 	int32_t status;
2414 	uint8_t rdcs_per_grp;
2415 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2416 	p_nxge_hw_pt_cfg_t p_cfgp;
2417 	p_nxge_rdc_grp_t rdc_grp_p;
2418 	int rdcgrp_cfg = CFG_NOT_SPECIFIED, rx_quick_cfg;
2419 	char *prop, *prop_val;
2420 	p_nxge_param_t param_arr;
2421 	config_token_t token;
2422 	nxge_grp_t *group;
2423 
2424 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_dma_config"));
2425 
2426 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2427 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2428 	rdc_grp_p = p_dma_cfgp->rdc_grps;
2429 
2430 	bitmap = 0;
2431 	end = p_cfgp->tdc.start + p_cfgp->tdc.owned;
2432 	p_dma_cfgp->tx_dma_map = 0;
2433 	for (i = p_cfgp->tdc.start; i < end; i++) {
2434 		bitmap |= (1 << i);
2435 	}
2436 
2437 	nxgep->tx_set.owned.map |= bitmap; /* Owned, & not shared. */
2438 
2439 	group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_TRANSMIT_GROUP);
2440 	group->map = bitmap;
2441 
2442 	p_dma_cfgp->tx_dma_map = bitmap;
2443 	param_arr = nxgep->param_arr;
2444 
2445 	/* Assume RDCs are evenly distributed */
2446 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
2447 	switch (rx_quick_cfg) {
2448 	case CFG_NOT_SPECIFIED:
2449 		prop = "rxdma-grp-cfg";
2450 		status = ddi_prop_lookup_string(DDI_DEV_T_NONE,
2451 		    nxgep->dip, 0, prop, (char **)&prop_val);
2452 		if (status != DDI_PROP_SUCCESS) {
2453 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2454 			    " property %s not found", prop));
2455 			rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2456 		} else {
2457 			token = nxge_get_config_token(prop_val);
2458 			switch (token) {
2459 			case L2_CLASSIFY:
2460 				break;
2461 			case CLASSIFY:
2462 			case L3_CLASSIFY:
2463 			case L3_DISTRIBUTE:
2464 			case L3_TCAM:
2465 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2466 				break;
2467 			default:
2468 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2469 				break;
2470 			}
2471 			ddi_prop_free(prop_val);
2472 		}
2473 		break;
2474 	case CFG_L3_WEB:
2475 	case CFG_L3_DISTRIBUTE:
2476 	case CFG_L2_CLASSIFY:
2477 	case CFG_L3_TCAM:
2478 		rdcgrp_cfg = rx_quick_cfg;
2479 		break;
2480 	default:
2481 		rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2482 		break;
2483 	}
2484 
2485 	st_rdc = p_cfgp->start_rdc;
2486 
2487 	switch (rdcgrp_cfg) {
2488 	case CFG_L3_DISTRIBUTE:
2489 	case CFG_L3_WEB:
2490 	case CFG_L3_TCAM:
2491 		ndmas = p_cfgp->max_rdcs;
2492 		ngrps = 1;
2493 		rdcs_per_grp = ndmas / ngrps;
2494 		break;
2495 	case CFG_L2_CLASSIFY:
2496 		ndmas = p_cfgp->max_rdcs / 2;
2497 		if (p_cfgp->max_rdcs < 2)
2498 			ndmas = 1;
2499 		ngrps = 1;
2500 		rdcs_per_grp = ndmas / ngrps;
2501 		break;
2502 	default:
2503 		ngrps = p_cfgp->max_rdc_grpids;
2504 		ndmas = p_cfgp->max_rdcs;
2505 		rdcs_per_grp = ndmas / ngrps;
2506 		break;
2507 	}
2508 
2509 	for (i = 0; i < ngrps; i++) {
2510 		uint8_t count = rdcs_per_grp;
2511 		dc_map_t map = 0;
2512 
2513 		rdc_grp_p = &p_dma_cfgp->rdc_grps[
2514 		    p_cfgp->def_mac_rxdma_grpid + i];
2515 		rdc_grp_p->start_rdc = st_rdc + i * rdcs_per_grp;
2516 		rdc_grp_p->max_rdcs = rdcs_per_grp;
2517 		rdc_grp_p->def_rdc = rdc_grp_p->start_rdc;
2518 
2519 		/* default to: 0, 1, 2, 3, ...., 0, 1, 2, 3.... */
2520 		while (count) {
2521 			map |= (1 << count);
2522 			count--;
2523 		}
2524 		map >>= 1;	/* In case <start_rdc> is zero (0) */
2525 		map <<= rdc_grp_p->start_rdc;
2526 		rdc_grp_p->map = map;
2527 
2528 		nxgep->rx_set.owned.map |= map; /* Owned, & not shared. */
2529 
2530 		group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_RECEIVE_GROUP);
2531 		group->map = rdc_grp_p->map;
2532 
2533 		rdc_grp_p->config_method = RDC_TABLE_ENTRY_METHOD_SEQ;
2534 		rdc_grp_p->flag = 1; /* This group has been configured. */
2535 	}
2536 
2537 
2538 	/* default RDC */
2539 	p_cfgp->def_rdc = p_cfgp->start_rdc;
2540 	nxgep->def_rdc = p_cfgp->start_rdc;
2541 
2542 	/* full 18 byte header ? */
2543 	p_dma_cfgp->rcr_full_header = NXGE_RCR_FULL_HEADER;
2544 	p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2545 	if (nxgep->function_num > 1)
2546 		p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_1G;
2547 	p_dma_cfgp->rbr_size = nxge_rbr_size;
2548 	p_dma_cfgp->rcr_size = nxge_rcr_size;
2549 
2550 	nxge_set_rdc_intr_property(nxgep);
2551 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_dma_config"));
2552 }
2553 
2554 boolean_t
2555 nxge_check_rxdma_port_member(p_nxge_t nxgep, uint8_t rdc)
2556 {
2557 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2558 	p_nxge_hw_pt_cfg_t p_cfgp;
2559 	int status = B_TRUE;
2560 
2561 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2562 
2563 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2564 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2565 
2566 	/* Receive DMA Channels */
2567 	if (rdc < p_cfgp->max_rdcs)
2568 		status = B_TRUE;
2569 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2570 	return (status);
2571 }
2572 
2573 boolean_t
2574 nxge_check_txdma_port_member(p_nxge_t nxgep, uint8_t tdc)
2575 {
2576 	int status = B_FALSE;
2577 
2578 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_txdma_port_member"));
2579 
2580 	if (tdc >= nxgep->pt_config.hw_config.tdc.start &&
2581 	    tdc < nxgep->pt_config.hw_config.tdc.count)
2582 		status = B_TRUE;
2583 
2584 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_txdma_port_member"));
2585 	return (status);
2586 }
2587 
2588 boolean_t
2589 nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep, uint8_t rdc_grp, uint8_t rdc)
2590 {
2591 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2592 	int status = B_TRUE;
2593 	p_nxge_rdc_grp_t rdc_grp_p;
2594 
2595 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2596 	    " ==> nxge_check_rxdma_rdcgrp_member"));
2597 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  nxge_check_rxdma_rdcgrp_member"
2598 	    " rdc  %d group %d", rdc, rdc_grp));
2599 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2600 
2601 	rdc_grp_p = &p_dma_cfgp->rdc_grps[rdc_grp];
2602 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  max  %d ", rdc_grp_p->max_rdcs));
2603 	if (rdc >= rdc_grp_p->max_rdcs) {
2604 		status = B_FALSE;
2605 	}
2606 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2607 	    " <== nxge_check_rxdma_rdcgrp_member"));
2608 	return (status);
2609 }
2610 
2611 boolean_t
2612 nxge_check_rdcgrp_port_member(p_nxge_t nxgep, uint8_t rdc_grp)
2613 {
2614 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2615 	p_nxge_hw_pt_cfg_t p_cfgp;
2616 	int status = B_TRUE;
2617 
2618 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rdcgrp_port_member"));
2619 
2620 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2621 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2622 
2623 	if (rdc_grp >= p_cfgp->max_rdc_grpids)
2624 		status = B_FALSE;
2625 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rdcgrp_port_member"));
2626 	return (status);
2627 }
2628 
2629 static void
2630 nxge_set_hw_vlan_class_config(p_nxge_t nxgep)
2631 {
2632 	int i;
2633 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2634 	p_nxge_hw_pt_cfg_t p_cfgp;
2635 	p_nxge_param_t param_arr;
2636 	uint_t vlan_cnt;
2637 	int *vlan_cfg_val;
2638 	nxge_param_map_t *vmap;
2639 	char *prop;
2640 	p_nxge_class_pt_cfg_t p_class_cfgp;
2641 	uint32_t good_cfg[32];
2642 	int good_count = 0;
2643 	nxge_mv_cfg_t *vlan_tbl;
2644 
2645 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_vlan_config"));
2646 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2647 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2648 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2649 
2650 	param_arr = nxgep->param_arr;
2651 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2652 
2653 	/*
2654 	 * By default, VLAN to RDC group mapping is disabled Need to read HW or
2655 	 * .conf properties to find out if mapping is required
2656 	 *
2657 	 * Format
2658 	 *
2659 	 * uint32_t array, each array entry specifying the VLAN id and the
2660 	 * mapping
2661 	 *
2662 	 * bit[30] = add bit[29] = remove bit[28]  = preference bits[23-16] =
2663 	 * rdcgrp bits[15-0] = VLAN ID ( )
2664 	 */
2665 
2666 	for (i = 0; i < NXGE_MAX_VLANS; i++) {
2667 		p_class_cfgp->vlan_tbl[i].flag = 0;
2668 	}
2669 
2670 	vlan_tbl = (nxge_mv_cfg_t *)&p_class_cfgp->vlan_tbl[0];
2671 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2672 	    &vlan_cfg_val, &vlan_cnt) == DDI_PROP_SUCCESS) {
2673 		for (i = 0; i < vlan_cnt; i++) {
2674 			vmap = (nxge_param_map_t *)&vlan_cfg_val[i];
2675 			if ((vmap->param_id) &&
2676 			    (vmap->param_id < NXGE_MAX_VLANS) &&
2677 			    (vmap->map_to <
2678 			    p_cfgp->max_rdc_grpids) &&
2679 			    (vmap->map_to >= (uint8_t)0)) {
2680 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2681 				    " nxge_vlan_config mapping"
2682 				    " id %d grp %d",
2683 				    vmap->param_id, vmap->map_to));
2684 				good_cfg[good_count] = vlan_cfg_val[i];
2685 				if (vlan_tbl[vmap->param_id].flag == 0)
2686 					good_count++;
2687 				vlan_tbl[vmap->param_id].flag = 1;
2688 				vlan_tbl[vmap->param_id].rdctbl =
2689 				    vmap->map_to + p_cfgp->def_mac_rxdma_grpid;
2690 				vlan_tbl[vmap->param_id].mpr_npr = vmap->pref;
2691 			}
2692 		}
2693 		ddi_prop_free(vlan_cfg_val);
2694 		if (good_count != vlan_cnt) {
2695 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2696 			    nxgep->dip, prop, (int *)good_cfg, good_count);
2697 		}
2698 	}
2699 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_vlan_config"));
2700 }
2701 
2702 static void
2703 nxge_set_hw_mac_class_config(p_nxge_t nxgep)
2704 {
2705 	int i;
2706 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2707 	p_nxge_hw_pt_cfg_t p_cfgp;
2708 	p_nxge_param_t param_arr;
2709 	uint_t mac_cnt;
2710 	int *mac_cfg_val;
2711 	nxge_param_map_t *mac_map;
2712 	char *prop;
2713 	p_nxge_class_pt_cfg_t p_class_cfgp;
2714 	int good_count = 0;
2715 	int good_cfg[NXGE_MAX_MACS];
2716 	nxge_mv_cfg_t *mac_host_info;
2717 
2718 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_mac_config"));
2719 
2720 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2721 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2722 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2723 	mac_host_info = (nxge_mv_cfg_t *)&p_class_cfgp->mac_host_info[0];
2724 
2725 	param_arr = nxgep->param_arr;
2726 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2727 
2728 	for (i = 0; i < NXGE_MAX_MACS; i++) {
2729 		p_class_cfgp->mac_host_info[i].flag = 0;
2730 		p_class_cfgp->mac_host_info[i].rdctbl =
2731 		    p_cfgp->def_mac_rxdma_grpid;
2732 	}
2733 
2734 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2735 	    &mac_cfg_val, &mac_cnt) == DDI_PROP_SUCCESS) {
2736 		for (i = 0; i < mac_cnt; i++) {
2737 			mac_map = (nxge_param_map_t *)&mac_cfg_val[i];
2738 			if ((mac_map->param_id < p_cfgp->max_macs) &&
2739 			    (mac_map->map_to <
2740 			    p_cfgp->max_rdc_grpids) &&
2741 			    (mac_map->map_to >= (uint8_t)0)) {
2742 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2743 				    " nxge_mac_config mapping"
2744 				    " id %d grp %d",
2745 				    mac_map->param_id, mac_map->map_to));
2746 				mac_host_info[mac_map->param_id].mpr_npr =
2747 				    mac_map->pref;
2748 				mac_host_info[mac_map->param_id].rdctbl =
2749 				    mac_map->map_to +
2750 				    p_cfgp->def_mac_rxdma_grpid;
2751 				good_cfg[good_count] = mac_cfg_val[i];
2752 				if (mac_host_info[mac_map->param_id].flag == 0)
2753 					good_count++;
2754 				mac_host_info[mac_map->param_id].flag = 1;
2755 			}
2756 		}
2757 		ddi_prop_free(mac_cfg_val);
2758 		if (good_count != mac_cnt) {
2759 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2760 			    nxgep->dip, prop, good_cfg, good_count);
2761 		}
2762 	}
2763 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_mac_config"));
2764 }
2765 
2766 static void
2767 nxge_set_hw_class_config(p_nxge_t nxgep)
2768 {
2769 	int i;
2770 	p_nxge_param_t param_arr;
2771 	int *int_prop_val;
2772 	uint32_t cfg_value;
2773 	char *prop;
2774 	p_nxge_class_pt_cfg_t p_class_cfgp;
2775 	int start_prop, end_prop;
2776 	uint_t prop_cnt;
2777 
2778 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_class_config"));
2779 
2780 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2781 	param_arr = nxgep->param_arr;
2782 	start_prop = param_class_opt_ip_usr4;
2783 	end_prop = param_class_opt_ipv6_sctp;
2784 
2785 	for (i = start_prop; i <= end_prop; i++) {
2786 		prop = param_arr[i].fcode_name;
2787 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip,
2788 		    0, prop, &int_prop_val,
2789 		    &prop_cnt) == DDI_PROP_SUCCESS) {
2790 			cfg_value = (uint32_t)*int_prop_val;
2791 			ddi_prop_free(int_prop_val);
2792 		} else {
2793 			cfg_value = (uint32_t)param_arr[i].value;
2794 		}
2795 		p_class_cfgp->class_cfg[i - start_prop] = cfg_value;
2796 	}
2797 
2798 	prop = param_arr[param_h1_init_value].fcode_name;
2799 
2800 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2801 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2802 		cfg_value = (uint32_t)*int_prop_val;
2803 		ddi_prop_free(int_prop_val);
2804 	} else {
2805 		cfg_value = (uint32_t)param_arr[param_h1_init_value].value;
2806 	}
2807 
2808 	p_class_cfgp->init_h1 = (uint32_t)cfg_value;
2809 	prop = param_arr[param_h2_init_value].fcode_name;
2810 
2811 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2812 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2813 		cfg_value = (uint32_t)*int_prop_val;
2814 		ddi_prop_free(int_prop_val);
2815 	} else {
2816 		cfg_value = (uint32_t)param_arr[param_h2_init_value].value;
2817 	}
2818 
2819 	p_class_cfgp->init_h2 = (uint16_t)cfg_value;
2820 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_class_config"));
2821 }
2822 
2823 nxge_status_t
2824 nxge_ldgv_init_n2(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2825 {
2826 	int i, maxldvs, maxldgs, nldvs;
2827 	int ldv, endldg;
2828 	uint8_t func;
2829 	uint8_t channel;
2830 	uint8_t chn_start;
2831 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
2832 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2833 	p_nxge_hw_pt_cfg_t p_cfgp;
2834 	p_nxge_ldgv_t ldgvp;
2835 	p_nxge_ldg_t ldgp, ptr;
2836 	p_nxge_ldv_t ldvp;
2837 	nxge_status_t status = NXGE_OK;
2838 	nxge_grp_set_t *set;
2839 
2840 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2"));
2841 	if (!*navail_p) {
2842 		*nrequired_p = 0;
2843 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2844 		    "<== nxge_ldgv_init:no avail"));
2845 		return (NXGE_ERROR);
2846 	}
2847 	/*
2848 	 * N2/NIU: one logical device owns one logical group. and each
2849 	 * device/group will be assigned one vector by Hypervisor.
2850 	 */
2851 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2852 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2853 	maxldgs = p_cfgp->max_ldgs;
2854 	if (!maxldgs) {
2855 		/* No devices configured. */
2856 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init_n2: "
2857 		    "no logical groups configured."));
2858 		return (NXGE_ERROR);
2859 	} else {
2860 		maxldvs = maxldgs + 1;
2861 	}
2862 
2863 	/*
2864 	 * If function zero instance, it needs to handle the system and MIF
2865 	 * error interrupts. MIF interrupt may not be needed for N2/NIU.
2866 	 */
2867 	func = nxgep->function_num;
2868 	if (func == 0) {
2869 		own_sys_err = B_TRUE;
2870 		if (!p_cfgp->ser_ldvid) {
2871 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2872 			    "nxge_ldgv_init_n2: func 0, ERR ID not set!"));
2873 		}
2874 		/* MIF interrupt */
2875 		if (!p_cfgp->mif_ldvid) {
2876 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2877 			    "nxge_ldgv_init_n2: func 0, MIF ID not set!"));
2878 		}
2879 	}
2880 
2881 	/*
2882 	 * Assume single partition, each function owns mac.
2883 	 */
2884 	if (!nxge_use_partition)
2885 		own_fzc = B_TRUE;
2886 
2887 	ldgvp = nxgep->ldgvp;
2888 	if (ldgvp == NULL) {
2889 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
2890 		nxgep->ldgvp = ldgvp;
2891 		ldgvp->maxldgs = (uint8_t)maxldgs;
2892 		ldgvp->maxldvs = (uint8_t)maxldvs;
2893 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(
2894 		    sizeof (nxge_ldg_t) * maxldgs, KM_SLEEP);
2895 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(
2896 		    sizeof (nxge_ldv_t) * maxldvs, KM_SLEEP);
2897 	} else {
2898 		ldgp = ldgvp->ldgp;
2899 		ldvp = ldgvp->ldvp;
2900 	}
2901 
2902 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
2903 	ldgvp->tmres = NXGE_TIMER_RESO;
2904 
2905 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2906 	    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d",
2907 	    maxldvs, maxldgs));
2908 
2909 	/* logical start_ldg is ldv */
2910 	ptr = ldgp;
2911 	for (i = 0; i < maxldgs; i++) {
2912 		ptr->func = func;
2913 		ptr->arm = B_TRUE;
2914 		ptr->vldg_index = (uint8_t)i;
2915 		ptr->ldg_timer = NXGE_TIMER_LDG;
2916 		ptr->ldg = p_cfgp->ldg[i];
2917 		ptr->sys_intr_handler = nxge_intr;
2918 		ptr->nldvs = 0;
2919 		ptr->ldvp = NULL;
2920 		ptr->nxgep = nxgep;
2921 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2922 		    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d "
2923 		    "ldg %d ldgptr $%p",
2924 		    maxldvs, maxldgs, ptr->ldg, ptr));
2925 		ptr++;
2926 	}
2927 
2928 	endldg = NXGE_INT_MAX_LDG;
2929 	nldvs = 0;
2930 	ldgvp->nldvs = 0;
2931 	ldgp->ldvp = NULL;
2932 	*nrequired_p = 0;
2933 
2934 	/*
2935 	 * logical device group table is organized in the following order (same
2936 	 * as what interrupt property has). function 0: owns MAC, MIF, error,
2937 	 * rx, tx. function 1: owns MAC, rx, tx.
2938 	 */
2939 
2940 	if (own_fzc && p_cfgp->mac_ldvid) {
2941 		/* Each function should own MAC interrupt */
2942 		ldv = p_cfgp->mac_ldvid;
2943 		ldvp->ldv = (uint8_t)ldv;
2944 		ldvp->is_mac = B_TRUE;
2945 		ldvp->ldv_intr_handler = nxge_mac_intr;
2946 		ldvp->ldv_ldf_masks = 0;
2947 		ldvp->nxgep = nxgep;
2948 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2949 		    "==> nxge_ldgv_init_n2(mac): maxldvs %d ldv %d "
2950 		    "ldg %d ldgptr $%p ldvptr $%p",
2951 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2952 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2953 		nldvs++;
2954 	}
2955 
2956 	if (own_fzc && p_cfgp->mif_ldvid) {
2957 		ldv = p_cfgp->mif_ldvid;
2958 		ldvp->ldv = (uint8_t)ldv;
2959 		ldvp->is_mif = B_TRUE;
2960 		ldvp->ldv_intr_handler = nxge_mif_intr;
2961 		ldvp->ldv_ldf_masks = 0;
2962 		ldvp->nxgep = nxgep;
2963 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2964 		    "==> nxge_ldgv_init_n2(mif): maxldvs %d ldv %d "
2965 		    "ldg %d ldgptr $%p ldvptr $%p",
2966 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2967 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2968 		nldvs++;
2969 	}
2970 
2971 	ldv = NXGE_SYS_ERROR_LD;
2972 	ldvp->use_timer = B_TRUE;
2973 	if (own_sys_err && p_cfgp->ser_ldvid) {
2974 		ldv = p_cfgp->ser_ldvid;
2975 		/*
2976 		 * Unmask the system interrupt states.
2977 		 */
2978 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
2979 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
2980 		    SYS_ERR_ZCP_MASK);
2981 	}
2982 	ldvp->ldv = (uint8_t)ldv;
2983 	ldvp->is_syserr = B_TRUE;
2984 	ldvp->ldv_intr_handler = nxge_syserr_intr;
2985 	ldvp->ldv_ldf_masks = 0;
2986 	ldvp->nxgep = nxgep;
2987 	ldgvp->ldvp_syserr = ldvp;
2988 
2989 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2990 	    "==> nxge_ldgv_init_n2(syserr): maxldvs %d ldv %d "
2991 	    "ldg %d ldgptr $%p ldvptr p%p",
2992 	    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2993 
2994 	if (own_sys_err && p_cfgp->ser_ldvid) {
2995 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2996 	} else {
2997 		ldvp++;
2998 	}
2999 
3000 	nldvs++;
3001 
3002 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3003 	    "(before rx) func %d nldvs %d navail %d nrequired %d",
3004 	    func, nldvs, *navail_p, *nrequired_p));
3005 
3006 	/*
3007 	 * Start with RDC to configure logical devices for each group.
3008 	 */
3009 	chn_start = p_cfgp->ldg_chn_start;
3010 	set = &nxgep->rx_set;
3011 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3012 		if ((1 << channel) & set->owned.map) {
3013 			ldvp->is_rxdma = B_TRUE;
3014 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3015 			ldvp->channel = channel;
3016 			ldvp->vdma_index = (uint8_t)channel;
3017 			ldvp->ldv_intr_handler = nxge_rx_intr;
3018 			ldvp->ldv_ldf_masks = 0;
3019 			ldvp->nxgep = nxgep;
3020 			ldgp->ldg = p_cfgp->ldg[chn_start];
3021 
3022 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3023 			    "==> nxge_ldgv_init_n2(rx%d): maxldvs %d ldv %d "
3024 			    "ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
3025 			    i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3026 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3027 			    endldg, nrequired_p);
3028 			nldvs++;
3029 			chn_start++;
3030 		}
3031 	}
3032 
3033 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3034 	    "func %d nldvs %d navail %d nrequired %d",
3035 	    func, nldvs, *navail_p, *nrequired_p));
3036 
3037 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3038 	    "func %d nldvs %d navail %d nrequired %d ldgp 0x%llx "
3039 	    "ldvp 0x%llx",
3040 	    func, nldvs, *navail_p, *nrequired_p, ldgp, ldvp));
3041 	/*
3042 	 * Transmit DMA channels.
3043 	 */
3044 	chn_start = p_cfgp->ldg_chn_start + 8;
3045 	set = &nxgep->tx_set;
3046 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3047 		if ((1 << channel) & set->owned.map) {
3048 			ldvp->is_txdma = B_TRUE;
3049 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3050 			ldvp->channel = channel;
3051 			ldvp->vdma_index = (uint8_t)channel;
3052 			ldvp->ldv_intr_handler = nxge_tx_intr;
3053 			ldvp->ldv_ldf_masks = 0;
3054 			ldgp->ldg = p_cfgp->ldg[chn_start];
3055 			ldvp->nxgep = nxgep;
3056 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3057 			    "==> nxge_ldgv_init_n2(tx%d): maxldvs %d ldv %d "
3058 			    "ldg %d ldgptr %p ldvptr %p",
3059 			    channel, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3060 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3061 			    endldg, nrequired_p);
3062 			nldvs++;
3063 			chn_start++;
3064 		}
3065 	}
3066 
3067 	ldgvp->ldg_intrs = *nrequired_p;
3068 	ldgvp->nldvs = (uint8_t)nldvs;
3069 
3070 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3071 	    "func %d nldvs %d maxgrps %d navail %d nrequired %d",
3072 	    func, nldvs, maxldgs, *navail_p, *nrequired_p));
3073 
3074 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init_n2"));
3075 	return (status);
3076 }
3077 
3078 /*
3079  * Interrupts related interface functions.
3080  */
3081 
3082 nxge_status_t
3083 nxge_ldgv_init(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
3084 {
3085 	int i, maxldvs, maxldgs, nldvs;
3086 	int ldv, ldg, endldg, ngrps;
3087 	uint8_t func;
3088 	uint8_t channel;
3089 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
3090 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
3091 	p_nxge_hw_pt_cfg_t p_cfgp;
3092 	p_nxge_ldgv_t ldgvp;
3093 	p_nxge_ldg_t ldgp, ptr;
3094 	p_nxge_ldv_t ldvp;
3095 	nxge_grp_set_t *set;
3096 
3097 	nxge_status_t status = NXGE_OK;
3098 
3099 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init"));
3100 	if (!*navail_p) {
3101 		*nrequired_p = 0;
3102 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3103 		    "<== nxge_ldgv_init:no avail"));
3104 		return (NXGE_ERROR);
3105 	}
3106 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
3107 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
3108 
3109 	nldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3110 
3111 	/*
3112 	 * If function zero instance, it needs to handle the system error
3113 	 * interrupts.
3114 	 */
3115 	func = nxgep->function_num;
3116 	if (func == 0) {
3117 		nldvs++;
3118 		own_sys_err = B_TRUE;
3119 	} else {
3120 		/* use timer */
3121 		nldvs++;
3122 	}
3123 
3124 	/*
3125 	 * Assume single partition, each function owns mac.
3126 	 */
3127 	if (!nxge_use_partition) {
3128 		/* mac */
3129 		nldvs++;
3130 		/* MIF */
3131 		nldvs++;
3132 		own_fzc = B_TRUE;
3133 	}
3134 	maxldvs = nldvs;
3135 	maxldgs = p_cfgp->max_ldgs;
3136 	if (!maxldvs || !maxldgs) {
3137 		/* No devices configured. */
3138 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init: "
3139 		    "no logical devices or groups configured."));
3140 		return (NXGE_ERROR);
3141 	}
3142 	ldgvp = nxgep->ldgvp;
3143 	if (ldgvp == NULL) {
3144 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
3145 		nxgep->ldgvp = ldgvp;
3146 		ldgvp->maxldgs = (uint8_t)maxldgs;
3147 		ldgvp->maxldvs = (uint8_t)maxldvs;
3148 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
3149 		    KM_SLEEP);
3150 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
3151 		    KM_SLEEP);
3152 	}
3153 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3154 	ldgvp->tmres = NXGE_TIMER_RESO;
3155 
3156 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3157 	    "==> nxge_ldgv_init: maxldvs %d maxldgs %d nldvs %d",
3158 	    maxldvs, maxldgs, nldvs));
3159 	ldg = p_cfgp->start_ldg;
3160 	ptr = ldgp;
3161 	for (i = 0; i < maxldgs; i++) {
3162 		ptr->func = func;
3163 		ptr->arm = B_TRUE;
3164 		ptr->vldg_index = (uint8_t)i;
3165 		ptr->ldg_timer = NXGE_TIMER_LDG;
3166 		ptr->ldg = ldg++;
3167 		ptr->sys_intr_handler = nxge_intr;
3168 		ptr->nldvs = 0;
3169 		ptr->nxgep = nxgep;
3170 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3171 		    "==> nxge_ldgv_init: maxldvs %d maxldgs %d ldg %d",
3172 		    maxldvs, maxldgs, ptr->ldg));
3173 		ptr++;
3174 	}
3175 
3176 	ldg = p_cfgp->start_ldg;
3177 	if (maxldgs > *navail_p) {
3178 		ngrps = *navail_p;
3179 	} else {
3180 		ngrps = maxldgs;
3181 	}
3182 	endldg = ldg + ngrps;
3183 
3184 	/*
3185 	 * Receive DMA channels.
3186 	 */
3187 	nldvs = 0;
3188 	ldgvp->nldvs = 0;
3189 	ldgp->ldvp = NULL;
3190 	*nrequired_p = 0;
3191 
3192 	/*
3193 	 * Start with RDC to configure logical devices for each group.
3194 	 */
3195 	set = &nxgep->rx_set;
3196 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3197 		if ((1 << channel) & set->owned.map) {
3198 			/* For now, <channel & <vdma_index> are the same. */
3199 			ldvp->is_rxdma = B_TRUE;
3200 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3201 			ldvp->channel = channel;
3202 			ldvp->vdma_index = (uint8_t)channel;
3203 			ldvp->ldv_intr_handler = nxge_rx_intr;
3204 			ldvp->ldv_ldf_masks = 0;
3205 			ldvp->use_timer = B_FALSE;
3206 			ldvp->nxgep = nxgep;
3207 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3208 			    endldg, nrequired_p);
3209 			nldvs++;
3210 		}
3211 	}
3212 
3213 	/*
3214 	 * Transmit DMA channels.
3215 	 */
3216 	set = &nxgep->tx_set;
3217 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3218 		if ((1 << channel) & set->owned.map) {
3219 			/* For now, <channel & <vdma_index> are the same. */
3220 			ldvp->is_txdma = B_TRUE;
3221 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3222 			ldvp->channel = channel;
3223 			ldvp->vdma_index = (uint8_t)channel;
3224 			ldvp->ldv_intr_handler = nxge_tx_intr;
3225 			ldvp->ldv_ldf_masks = 0;
3226 			ldvp->use_timer = B_FALSE;
3227 			ldvp->nxgep = nxgep;
3228 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3229 			    endldg, nrequired_p);
3230 			nldvs++;
3231 		}
3232 	}
3233 
3234 	if (own_fzc) {
3235 		ldv = NXGE_MIF_LD;
3236 		ldvp->ldv = (uint8_t)ldv;
3237 		ldvp->is_mif = B_TRUE;
3238 		ldvp->ldv_intr_handler = nxge_mif_intr;
3239 		ldvp->ldv_ldf_masks = 0;
3240 		ldvp->use_timer = B_FALSE;
3241 		ldvp->nxgep = nxgep;
3242 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3243 		nldvs++;
3244 	}
3245 	/*
3246 	 * MAC port (function zero control)
3247 	 */
3248 	if (own_fzc) {
3249 		ldvp->is_mac = B_TRUE;
3250 		ldvp->ldv_intr_handler = nxge_mac_intr;
3251 		ldvp->ldv_ldf_masks = 0;
3252 		ldv = func + NXGE_MAC_LD_START;
3253 		ldvp->ldv = (uint8_t)ldv;
3254 		ldvp->use_timer = B_FALSE;
3255 		ldvp->nxgep = nxgep;
3256 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3257 		nldvs++;
3258 	}
3259 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3260 	    "func %d nldvs %d navail %d nrequired %d",
3261 	    func, nldvs, *navail_p, *nrequired_p));
3262 	/*
3263 	 * Function 0 owns system error interrupts.
3264 	 */
3265 	ldvp->use_timer = B_TRUE;
3266 	if (own_sys_err) {
3267 		ldv = NXGE_SYS_ERROR_LD;
3268 		ldvp->ldv = (uint8_t)ldv;
3269 		ldvp->is_syserr = B_TRUE;
3270 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3271 		ldvp->ldv_ldf_masks = 0;
3272 		ldvp->nxgep = nxgep;
3273 		ldgvp->ldvp_syserr = ldvp;
3274 		/*
3275 		 * Unmask the system interrupt states.
3276 		 */
3277 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3278 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3279 		    SYS_ERR_ZCP_MASK);
3280 
3281 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3282 		nldvs++;
3283 	} else {
3284 		ldv = NXGE_SYS_ERROR_LD;
3285 		ldvp->ldv = (uint8_t)ldv;
3286 		ldvp->is_syserr = B_TRUE;
3287 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3288 		ldvp->nxgep = nxgep;
3289 		ldvp->ldv_ldf_masks = 0;
3290 		ldgvp->ldvp_syserr = ldvp;
3291 	}
3292 
3293 	ldgvp->ldg_intrs = *nrequired_p;
3294 
3295 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3296 	    "func %d nldvs %d navail %d nrequired %d",
3297 	    func, nldvs, *navail_p, *nrequired_p));
3298 
3299 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init"));
3300 	return (status);
3301 }
3302 
3303 nxge_status_t
3304 nxge_ldgv_uninit(p_nxge_t nxgep)
3305 {
3306 	p_nxge_ldgv_t ldgvp;
3307 
3308 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_uninit"));
3309 	ldgvp = nxgep->ldgvp;
3310 	if (ldgvp == NULL) {
3311 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_uninit: "
3312 		    "no logical group configured."));
3313 		return (NXGE_OK);
3314 	}
3315 	if (ldgvp->ldgp) {
3316 		KMEM_FREE(ldgvp->ldgp, sizeof (nxge_ldg_t) * ldgvp->maxldgs);
3317 	}
3318 	if (ldgvp->ldvp) {
3319 		KMEM_FREE(ldgvp->ldvp, sizeof (nxge_ldv_t) * ldgvp->maxldvs);
3320 	}
3321 	KMEM_FREE(ldgvp, sizeof (nxge_ldgv_t));
3322 	nxgep->ldgvp = NULL;
3323 
3324 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_uninit"));
3325 	return (NXGE_OK);
3326 }
3327 
3328 nxge_status_t
3329 nxge_intr_ldgv_init(p_nxge_t nxgep)
3330 {
3331 	nxge_status_t status = NXGE_OK;
3332 
3333 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_ldgv_init"));
3334 	/*
3335 	 * Configure the logical device group numbers, state vectors and
3336 	 * interrupt masks for each logical device.
3337 	 */
3338 	status = nxge_fzc_intr_init(nxgep);
3339 
3340 	/*
3341 	 * Configure logical device masks and timers.
3342 	 */
3343 	status = nxge_intr_mask_mgmt(nxgep);
3344 
3345 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_ldgv_init"));
3346 	return (status);
3347 }
3348 
3349 nxge_status_t
3350 nxge_intr_mask_mgmt(p_nxge_t nxgep)
3351 {
3352 	p_nxge_ldgv_t ldgvp;
3353 	p_nxge_ldg_t ldgp;
3354 	p_nxge_ldv_t ldvp;
3355 	npi_handle_t handle;
3356 	int i, j;
3357 	npi_status_t rs = NPI_SUCCESS;
3358 
3359 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_mask_mgmt"));
3360 
3361 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3362 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3363 		    "<== nxge_intr_mask_mgmt: Null ldgvp"));
3364 		return (NXGE_ERROR);
3365 	}
3366 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3367 	ldgp = ldgvp->ldgp;
3368 	ldvp = ldgvp->ldvp;
3369 	if (ldgp == NULL || ldvp == NULL) {
3370 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3371 		    "<== nxge_intr_mask_mgmt: Null ldgp or ldvp"));
3372 		return (NXGE_ERROR);
3373 	}
3374 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3375 	    "==> nxge_intr_mask_mgmt: # of intrs %d ", ldgvp->ldg_intrs));
3376 	/* Initialize masks. */
3377 	if (nxgep->niu_type != N2_NIU) {
3378 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3379 		    "==> nxge_intr_mask_mgmt(Neptune): # intrs %d ",
3380 		    ldgvp->ldg_intrs));
3381 		for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3382 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3383 			    "==> nxge_intr_mask_mgmt(Neptune): # ldv %d "
3384 			    "in group %d", ldgp->nldvs, ldgp->ldg));
3385 			for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3386 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3387 				    "==> nxge_intr_mask_mgmt: set ldv # %d "
3388 				    "for ldg %d", ldvp->ldv, ldgp->ldg));
3389 				rs = npi_intr_mask_set(handle, ldvp->ldv,
3390 				    ldvp->ldv_ldf_masks);
3391 				if (rs != NPI_SUCCESS) {
3392 					NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3393 					    "<== nxge_intr_mask_mgmt: "
3394 					    "set mask failed "
3395 					    " rs 0x%x ldv %d mask 0x%x",
3396 					    rs, ldvp->ldv,
3397 					    ldvp->ldv_ldf_masks));
3398 					return (NXGE_ERROR | rs);
3399 				}
3400 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3401 				    "==> nxge_intr_mask_mgmt: "
3402 				    "set mask OK "
3403 				    " rs 0x%x ldv %d mask 0x%x",
3404 				    rs, ldvp->ldv,
3405 				    ldvp->ldv_ldf_masks));
3406 			}
3407 		}
3408 	}
3409 	ldgp = ldgvp->ldgp;
3410 	/* Configure timer and arm bit */
3411 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3412 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3413 		    ldgp->arm, ldgp->ldg_timer);
3414 		if (rs != NPI_SUCCESS) {
3415 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3416 			    "<== nxge_intr_mask_mgmt: "
3417 			    "set timer failed "
3418 			    " rs 0x%x dg %d timer 0x%x",
3419 			    rs, ldgp->ldg, ldgp->ldg_timer));
3420 			return (NXGE_ERROR | rs);
3421 		}
3422 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3423 		    "==> nxge_intr_mask_mgmt: "
3424 		    "set timer OK "
3425 		    " rs 0x%x ldg %d timer 0x%x",
3426 		    rs, ldgp->ldg, ldgp->ldg_timer));
3427 	}
3428 
3429 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_fzc_intr_mask_mgmt"));
3430 	return (NXGE_OK);
3431 }
3432 
3433 nxge_status_t
3434 nxge_intr_mask_mgmt_set(p_nxge_t nxgep, boolean_t on)
3435 {
3436 	p_nxge_ldgv_t ldgvp;
3437 	p_nxge_ldg_t ldgp;
3438 	p_nxge_ldv_t ldvp;
3439 	npi_handle_t handle;
3440 	int i, j;
3441 	npi_status_t rs = NPI_SUCCESS;
3442 
3443 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3444 	    "==> nxge_intr_mask_mgmt_set (%d)", on));
3445 
3446 	if (nxgep->niu_type == N2_NIU) {
3447 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3448 		    "<== nxge_intr_mask_mgmt_set (%d) not set (N2/NIU)",
3449 		    on));
3450 		return (NXGE_ERROR);
3451 	}
3452 
3453 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3454 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3455 		    "==> nxge_intr_mask_mgmt_set: Null ldgvp"));
3456 		return (NXGE_ERROR);
3457 	}
3458 
3459 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3460 	ldgp = ldgvp->ldgp;
3461 	ldvp = ldgvp->ldvp;
3462 	if (ldgp == NULL || ldvp == NULL) {
3463 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3464 		    "<== nxge_intr_mask_mgmt_set: Null ldgp or ldvp"));
3465 		return (NXGE_ERROR);
3466 	}
3467 	/* set masks. */
3468 	for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3469 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3470 		    "==> nxge_intr_mask_mgmt_set: flag %d ldg %d"
3471 		    "set mask nldvs %d", on, ldgp->ldg, ldgp->nldvs));
3472 		for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3473 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3474 			    "==> nxge_intr_mask_mgmt_set: "
3475 			    "for %d %d flag %d", i, j, on));
3476 			if (on) {
3477 				ldvp->ldv_ldf_masks = 0;
3478 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3479 				    "==> nxge_intr_mask_mgmt_set: "
3480 				    "ON mask off"));
3481 			} else if (!on) {
3482 				ldvp->ldv_ldf_masks = (uint8_t)LD_IM1_MASK;
3483 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3484 				    "==> nxge_intr_mask_mgmt_set:mask on"));
3485 			}
3486 			rs = npi_intr_mask_set(handle, ldvp->ldv,
3487 			    ldvp->ldv_ldf_masks);
3488 			if (rs != NPI_SUCCESS) {
3489 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3490 				    "==> nxge_intr_mask_mgmt_set: "
3491 				    "set mask failed "
3492 				    " rs 0x%x ldv %d mask 0x%x",
3493 				    rs, ldvp->ldv, ldvp->ldv_ldf_masks));
3494 				return (NXGE_ERROR | rs);
3495 			}
3496 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3497 			    "==> nxge_intr_mask_mgmt_set: flag %d"
3498 			    "set mask OK "
3499 			    " ldv %d mask 0x%x",
3500 			    on, ldvp->ldv, ldvp->ldv_ldf_masks));
3501 		}
3502 	}
3503 
3504 	ldgp = ldgvp->ldgp;
3505 	/* set the arm bit */
3506 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3507 		if (on && !ldgp->arm) {
3508 			ldgp->arm = B_TRUE;
3509 		} else if (!on && ldgp->arm) {
3510 			ldgp->arm = B_FALSE;
3511 		}
3512 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3513 		    ldgp->arm, ldgp->ldg_timer);
3514 		if (rs != NPI_SUCCESS) {
3515 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3516 			    "<== nxge_intr_mask_mgmt_set: "
3517 			    "set timer failed "
3518 			    " rs 0x%x ldg %d timer 0x%x",
3519 			    rs, ldgp->ldg, ldgp->ldg_timer));
3520 			return (NXGE_ERROR | rs);
3521 		}
3522 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3523 		    "==> nxge_intr_mask_mgmt_set: OK (flag %d) "
3524 		    "set timer "
3525 		    " ldg %d timer 0x%x",
3526 		    on, ldgp->ldg, ldgp->ldg_timer));
3527 	}
3528 
3529 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_mask_mgmt_set"));
3530 	return (NXGE_OK);
3531 }
3532 
3533 static nxge_status_t
3534 nxge_get_mac_addr_properties(p_nxge_t nxgep)
3535 {
3536 #if defined(_BIG_ENDIAN)
3537 	uchar_t *prop_val;
3538 	uint_t prop_len;
3539 	uint_t j;
3540 #endif
3541 	uint_t i;
3542 	uint8_t func_num;
3543 	boolean_t compute_macs = B_TRUE;
3544 
3545 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_mac_addr_properties "));
3546 
3547 #if defined(_BIG_ENDIAN)
3548 	/*
3549 	 * Get the ethernet address.
3550 	 */
3551 	(void) localetheraddr((struct ether_addr *)NULL, &nxgep->ouraddr);
3552 
3553 	/*
3554 	 * Check if it is an adapter with its own local mac address If it is
3555 	 * present, override the system mac address.
3556 	 */
3557 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3558 	    "local-mac-address", &prop_val,
3559 	    &prop_len) == DDI_PROP_SUCCESS) {
3560 		if (prop_len == ETHERADDRL) {
3561 			nxgep->factaddr = *(p_ether_addr_t)prop_val;
3562 			NXGE_DEBUG_MSG((nxgep, DDI_CTL, "Local mac address = "
3563 			    "%02x:%02x:%02x:%02x:%02x:%02x",
3564 			    prop_val[0], prop_val[1], prop_val[2],
3565 			    prop_val[3], prop_val[4], prop_val[5]));
3566 		}
3567 		ddi_prop_free(prop_val);
3568 	}
3569 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3570 	    "local-mac-address?", &prop_val,
3571 	    &prop_len) == DDI_PROP_SUCCESS) {
3572 		if (strncmp("true", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3573 			nxgep->ouraddr = nxgep->factaddr;
3574 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3575 			    "Using local MAC address"));
3576 		}
3577 		ddi_prop_free(prop_val);
3578 	} else {
3579 		nxgep->ouraddr = nxgep->factaddr;
3580 	}
3581 
3582 	if ((!nxgep->vpd_info.present) ||
3583 	    (nxge_is_valid_local_mac(nxgep->factaddr)))
3584 		goto got_mac_addr;
3585 
3586 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "nxge_get_mac_addr_properties: "
3587 	    "MAC address from properties is not valid...reading from PROM"));
3588 
3589 #endif
3590 	if (!nxgep->vpd_info.ver_valid) {
3591 		(void) nxge_espc_mac_addrs_get(nxgep);
3592 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3593 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3594 			    "MAC address"));
3595 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3596 			    "[%s] invalid...please update",
3597 			    nxgep->vpd_info.ver));
3598 			return (NXGE_ERROR);
3599 		}
3600 		nxgep->ouraddr = nxgep->factaddr;
3601 		goto got_mac_addr;
3602 	}
3603 	/*
3604 	 * First get the MAC address from the info in the VPD data read
3605 	 * from the EEPROM.
3606 	 */
3607 	nxge_espc_get_next_mac_addr(nxgep->vpd_info.mac_addr,
3608 	    nxgep->function_num, &nxgep->factaddr);
3609 
3610 	if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3611 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3612 		    "nxge_get_mac_addr_properties: "
3613 		    "MAC address in EEPROM VPD data not valid"
3614 		    "...reading from NCR registers"));
3615 		(void) nxge_espc_mac_addrs_get(nxgep);
3616 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3617 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3618 			    "MAC address"));
3619 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3620 			    "[%s] invalid...please update",
3621 			    nxgep->vpd_info.ver));
3622 			return (NXGE_ERROR);
3623 		}
3624 	}
3625 
3626 	nxgep->ouraddr = nxgep->factaddr;
3627 
3628 got_mac_addr:
3629 	func_num = nxgep->function_num;
3630 
3631 	/*
3632 	 * Note: mac-addresses property is the list of mac addresses for a
3633 	 * port. NXGE_MAX_MMAC_ADDRS is the total number of MAC addresses
3634 	 * allocated for a board.
3635 	 */
3636 	nxgep->nxge_mmac_info.total_factory_macs = NXGE_MAX_MMAC_ADDRS;
3637 
3638 #if defined(_BIG_ENDIAN)
3639 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3640 	    "mac-addresses", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3641 		/*
3642 		 * XAUI may have up to 18 MACs, more than the XMAC can
3643 		 * use (1 unique MAC plus 16 alternate MACs)
3644 		 */
3645 		nxgep->nxge_mmac_info.num_factory_mmac =
3646 		    prop_len / ETHERADDRL - 1;
3647 		if (nxgep->nxge_mmac_info.num_factory_mmac >
3648 		    XMAC_MAX_ALT_ADDR_ENTRY) {
3649 			nxgep->nxge_mmac_info.num_factory_mmac =
3650 			    XMAC_MAX_ALT_ADDR_ENTRY;
3651 		}
3652 
3653 		for (i = 1; i <= nxgep->nxge_mmac_info.num_factory_mmac; i++) {
3654 			for (j = 0; j < ETHERADDRL; j++) {
3655 				nxgep->nxge_mmac_info.factory_mac_pool[i][j] =
3656 				    *(prop_val + (i * ETHERADDRL) + j);
3657 			}
3658 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3659 			    "nxge_get_mac_addr_properties: Alt mac[%d] from "
3660 			    "mac-addresses property[%2x:%2x:%2x:%2x:%2x:%2x]",
3661 			    i, nxgep->nxge_mmac_info.factory_mac_pool[i][0],
3662 			    nxgep->nxge_mmac_info.factory_mac_pool[i][1],
3663 			    nxgep->nxge_mmac_info.factory_mac_pool[i][2],
3664 			    nxgep->nxge_mmac_info.factory_mac_pool[i][3],
3665 			    nxgep->nxge_mmac_info.factory_mac_pool[i][4],
3666 			    nxgep->nxge_mmac_info.factory_mac_pool[i][5]));
3667 		}
3668 
3669 		compute_macs = B_FALSE;
3670 		ddi_prop_free(prop_val);
3671 		goto got_mmac_info;
3672 	}
3673 #endif
3674 	/*
3675 	 * total_factory_macs = 32
3676 	 * num_factory_mmac = (32 >> (nports/2)) - 1
3677 	 * So if nports = 4, then num_factory_mmac =  7
3678 	 *    if nports = 2, then num_factory_mmac = 15
3679 	 */
3680 	nxgep->nxge_mmac_info.num_factory_mmac =
3681 	    ((nxgep->nxge_mmac_info.total_factory_macs >>
3682 	    (nxgep->nports >> 1))) - 1;
3683 
3684 got_mmac_info:
3685 
3686 	if ((nxgep->function_num < 2) &&
3687 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3688 	    XMAC_MAX_ALT_ADDR_ENTRY)) {
3689 		nxgep->nxge_mmac_info.num_factory_mmac =
3690 		    XMAC_MAX_ALT_ADDR_ENTRY;
3691 	} else if ((nxgep->function_num > 1) &&
3692 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3693 	    BMAC_MAX_ALT_ADDR_ENTRY)) {
3694 		nxgep->nxge_mmac_info.num_factory_mmac =
3695 		    BMAC_MAX_ALT_ADDR_ENTRY;
3696 	}
3697 
3698 	for (i = 0; i <= nxgep->nxge_mmac_info.num_mmac; i++) {
3699 		(void) npi_mac_altaddr_disable(nxgep->npi_handle,
3700 		    NXGE_GET_PORT_NUM(func_num), i);
3701 	}
3702 
3703 	(void) nxge_init_mmac(nxgep, compute_macs);
3704 	return (NXGE_OK);
3705 }
3706 
3707 void
3708 nxge_get_xcvr_properties(p_nxge_t nxgep)
3709 {
3710 	uchar_t *prop_val;
3711 	uint_t prop_len;
3712 
3713 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_xcvr_properties"));
3714 
3715 	/*
3716 	 * Read the type of physical layer interface being used.
3717 	 */
3718 	nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3719 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3720 	    "phy-type", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3721 		if (strncmp("pcs", (caddr_t)prop_val,
3722 		    (size_t)prop_len) == 0) {
3723 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3724 		} else {
3725 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3726 		}
3727 		ddi_prop_free(prop_val);
3728 	} else if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3729 	    "phy-interface", &prop_val,
3730 	    &prop_len) == DDI_PROP_SUCCESS) {
3731 		if (strncmp("pcs", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3732 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3733 		} else {
3734 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3735 		}
3736 		ddi_prop_free(prop_val);
3737 	}
3738 }
3739 
3740 /*
3741  * Static functions start here.
3742  */
3743 
3744 static void
3745 nxge_ldgv_setup(p_nxge_ldg_t *ldgp, p_nxge_ldv_t *ldvp, uint8_t ldv,
3746 	uint8_t endldg, int *ngrps)
3747 {
3748 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup"));
3749 	/* Assign the group number for each device. */
3750 	(*ldvp)->ldg_assigned = (*ldgp)->ldg;
3751 	(*ldvp)->ldgp = *ldgp;
3752 	(*ldvp)->ldv = ldv;
3753 
3754 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3755 	    "ldv %d endldg %d ldg %d, ldvp $%p",
3756 	    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3757 
3758 	(*ldgp)->nldvs++;
3759 	if ((*ldgp)->ldg == (endldg - 1)) {
3760 		if ((*ldgp)->ldvp == NULL) {
3761 			(*ldgp)->ldvp = *ldvp;
3762 			*ngrps += 1;
3763 			NXGE_DEBUG_MSG((NULL, INT_CTL,
3764 			    "==> nxge_ldgv_setup: ngrps %d", *ngrps));
3765 		}
3766 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3767 		    "==> nxge_ldgv_setup: ldvp $%p ngrps %d",
3768 		    *ldvp, *ngrps));
3769 		++*ldvp;
3770 	} else {
3771 		(*ldgp)->ldvp = *ldvp;
3772 		*ngrps += 1;
3773 		NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup(done): "
3774 		    "ldv %d endldg %d ldg %d, ldvp $%p",
3775 		    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3776 		(*ldvp) = ++*ldvp;
3777 		(*ldgp) = ++*ldgp;
3778 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3779 		    "==> nxge_ldgv_setup: new ngrps %d", *ngrps));
3780 	}
3781 
3782 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3783 	    "ldv %d ldvp $%p endldg %d ngrps %d",
3784 	    ldv, ldvp, endldg, *ngrps));
3785 
3786 	NXGE_DEBUG_MSG((NULL, INT_CTL, "<== nxge_ldgv_setup"));
3787 }
3788 
3789 /*
3790  * Note: This function assumes the following distribution of mac
3791  * addresses among 4 ports in neptune:
3792  *
3793  *      -------------
3794  *    0|            |0 - local-mac-address for fn 0
3795  *      -------------
3796  *    1|            |1 - local-mac-address for fn 1
3797  *      -------------
3798  *    2|            |2 - local-mac-address for fn 2
3799  *      -------------
3800  *    3|            |3 - local-mac-address for fn 3
3801  *      -------------
3802  *     |            |4 - Start of alt. mac addr. for fn 0
3803  *     |            |
3804  *     |            |
3805  *     |            |10
3806  *     --------------
3807  *     |            |11 - Start of alt. mac addr. for fn 1
3808  *     |            |
3809  *     |            |
3810  *     |            |17
3811  *     --------------
3812  *     |            |18 - Start of alt. mac addr. for fn 2
3813  *     |            |
3814  *     |            |
3815  *     |            |24
3816  *     --------------
3817  *     |            |25 - Start of alt. mac addr. for fn 3
3818  *     |            |
3819  *     |            |
3820  *     |            |31
3821  *     --------------
3822  *
3823  * For N2/NIU the mac addresses is from XAUI card.
3824  *
3825  * When 'compute_addrs' is true, the alternate mac addresses are computed
3826  * using the unique mac address as base. Otherwise the alternate addresses
3827  * are assigned from the list read off the 'mac-addresses' property.
3828  */
3829 
3830 static void
3831 nxge_init_mmac(p_nxge_t nxgep, boolean_t compute_addrs)
3832 {
3833 	int slot;
3834 	uint8_t func_num;
3835 	uint16_t *base_mmac_addr;
3836 	uint32_t alt_mac_ls4b;
3837 	uint16_t *mmac_addr;
3838 	uint32_t base_mac_ls4b; /* least significant 4 bytes */
3839 	nxge_mmac_t *mmac_info;
3840 	npi_mac_addr_t mac_addr;
3841 
3842 	func_num = nxgep->function_num;
3843 	base_mmac_addr = (uint16_t *)&nxgep->factaddr;
3844 	mmac_info = (nxge_mmac_t *)&nxgep->nxge_mmac_info;
3845 
3846 	if (compute_addrs) {
3847 		base_mac_ls4b = ((uint32_t)base_mmac_addr[1]) << 16 |
3848 		    base_mmac_addr[2];
3849 
3850 		if (nxgep->niu_type == N2_NIU) {
3851 			/* ls4b of 1st altmac */
3852 			alt_mac_ls4b = base_mac_ls4b + 1;
3853 		} else {			/* Neptune */
3854 			alt_mac_ls4b = base_mac_ls4b +
3855 			    (nxgep->nports - func_num) +
3856 			    (func_num * (mmac_info->num_factory_mmac));
3857 		}
3858 	}
3859 
3860 	/* Set flags for unique MAC */
3861 	mmac_info->mac_pool[0].flags |= MMAC_SLOT_USED | MMAC_VENDOR_ADDR;
3862 
3863 	/* Clear flags of all alternate MAC slots */
3864 	for (slot = 1; slot <= mmac_info->num_mmac; slot++) {
3865 		if (slot <= mmac_info->num_factory_mmac)
3866 			mmac_info->mac_pool[slot].flags = MMAC_VENDOR_ADDR;
3867 		else
3868 			mmac_info->mac_pool[slot].flags = 0;
3869 	}
3870 
3871 	/* Generate and store factory alternate MACs */
3872 	for (slot = 1; slot <= mmac_info->num_factory_mmac; slot++) {
3873 		mmac_addr = (uint16_t *)&mmac_info->factory_mac_pool[slot];
3874 		if (compute_addrs) {
3875 			mmac_addr[0] = base_mmac_addr[0];
3876 			mac_addr.w2 = mmac_addr[0];
3877 
3878 			mmac_addr[1] = (alt_mac_ls4b >> 16) & 0x0FFFF;
3879 			mac_addr.w1 = mmac_addr[1];
3880 
3881 			mmac_addr[2] = alt_mac_ls4b & 0x0FFFF;
3882 			mac_addr.w0 = mmac_addr[2];
3883 
3884 			alt_mac_ls4b++;
3885 		} else {
3886 			mac_addr.w2 = mmac_addr[0];
3887 			mac_addr.w1 = mmac_addr[1];
3888 			mac_addr.w0 = mmac_addr[2];
3889 		}
3890 
3891 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3892 		    "mac_pool_addr[%2x:%2x:%2x:%2x:%2x:%2x] npi_addr[%x%x%x]",
3893 		    mmac_info->factory_mac_pool[slot][0],
3894 		    mmac_info->factory_mac_pool[slot][1],
3895 		    mmac_info->factory_mac_pool[slot][2],
3896 		    mmac_info->factory_mac_pool[slot][3],
3897 		    mmac_info->factory_mac_pool[slot][4],
3898 		    mmac_info->factory_mac_pool[slot][5],
3899 		    mac_addr.w0, mac_addr.w1, mac_addr.w2));
3900 		/*
3901 		 * slot minus 1 because npi_mac_altaddr_entry expects 0
3902 		 * for the first alternate mac address.
3903 		 */
3904 		(void) npi_mac_altaddr_entry(nxgep->npi_handle, OP_SET,
3905 		    NXGE_GET_PORT_NUM(func_num), slot - 1, &mac_addr);
3906 	}
3907 	/* Initialize the first two parameters for mmac kstat */
3908 	nxgep->statsp->mmac_stats.mmac_max_cnt = mmac_info->num_mmac;
3909 	nxgep->statsp->mmac_stats.mmac_avail_cnt = mmac_info->num_mmac;
3910 }
3911