1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #if defined(DEBUG) 27 #define BUSRA_DEBUG 28 #endif 29 30 /* 31 * This module provides a set of resource management interfaces 32 * to manage bus resources globally in the system. 33 * 34 * The bus nexus drivers are typically responsible to setup resource 35 * maps for the bus resources available for a bus instance. However 36 * this module also provides resource setup functions for PCI bus 37 * (used by both SPARC and X86 platforms) and ISA bus instances (used 38 * only for X86 platforms). 39 */ 40 41 #include <sys/types.h> 42 #include <sys/systm.h> 43 #include <sys/ddi.h> 44 #include <sys/sunddi.h> 45 #include <sys/sunndi.h> 46 #include <sys/ddi_impldefs.h> 47 #include <sys/ndi_impldefs.h> 48 #include <sys/kmem.h> 49 #include <sys/pctypes.h> 50 #include <sys/modctl.h> 51 #include <sys/debug.h> 52 #include <sys/spl.h> 53 #include <sys/pci.h> 54 #include <sys/autoconf.h> 55 56 #if defined(BUSRA_DEBUG) 57 int busra_debug = 0; 58 #define DEBUGPRT \ 59 if (busra_debug) cmn_err 60 61 #else 62 #define DEBUGPRT \ 63 if (0) cmn_err 64 #endif 65 66 67 /* 68 * global mutex that protects the global list of resource maps. 69 */ 70 kmutex_t ra_lock; 71 72 /* 73 * basic resource element 74 */ 75 struct ra_resource { 76 struct ra_resource *ra_next; 77 uint64_t ra_base; 78 uint64_t ra_len; 79 }; 80 81 /* 82 * link list element for the list of dips (and their resource ranges) 83 * for a particular resource type. 84 * ra_rangeset points to the list of resources available 85 * for this type and this dip. 86 */ 87 struct ra_dip_type { 88 struct ra_dip_type *ra_next; 89 struct ra_resource *ra_rangeset; 90 dev_info_t *ra_dip; 91 }; 92 93 94 /* 95 * link list element for list of types resources. Each element 96 * has all resources for a particular type. 97 */ 98 struct ra_type_map { 99 struct ra_type_map *ra_next; 100 struct ra_dip_type *ra_dip_list; 101 char *type; 102 }; 103 104 105 /* 106 * place holder to keep the head of the whole global list. 107 * the address of the first typemap would be stored in it. 108 */ 109 static struct ra_type_map *ra_map_list_head = NULL; 110 111 112 /* 113 * This is the loadable module wrapper. 114 * It is essentially boilerplate so isn't documented 115 */ 116 extern struct mod_ops mod_miscops; 117 118 #ifdef BUSRA_DEBUG 119 void ra_dump_all(); 120 #endif 121 122 /* internal function prototypes */ 123 static struct ra_dip_type *find_dip_map_resources(dev_info_t *dip, char *type, 124 struct ra_dip_type ***backdip, struct ra_type_map ***backtype, 125 uint32_t flag); 126 static int isnot_pow2(uint64_t value); 127 static int claim_pci_busnum(dev_info_t *dip, void *arg); 128 static int ra_map_exist(dev_info_t *dip, char *type); 129 130 static int pci_get_available_prop(dev_info_t *dip, uint64_t base, 131 uint64_t len, char *busra_type); 132 static int pci_put_available_prop(dev_info_t *dip, uint64_t base, 133 uint64_t len, char *busra_type); 134 static uint32_t pci_type_ra2pci(char *type); 135 static boolean_t is_pcie_fabric(dev_info_t *dip); 136 137 #define PCI_ADDR_TYPE_MASK (PCI_REG_ADDR_M | PCI_REG_PF_M) 138 #define PCI_ADDR_TYPE_INVAL 0xffffffff 139 140 #define RA_INSERT(prev, el) \ 141 el->ra_next = *prev; \ 142 *prev = el; 143 144 #define RA_REMOVE(prev, el) \ 145 *prev = el->ra_next; 146 147 148 static struct modlmisc modlmisc = { 149 &mod_miscops, /* Type of module. This one is a module */ 150 "Bus Resource Allocator (BUSRA)", /* Name of the module. */ 151 }; 152 153 static struct modlinkage modlinkage = { 154 MODREV_1, (void *)&modlmisc, NULL 155 }; 156 157 int 158 _init() 159 { 160 int ret; 161 162 mutex_init(&ra_lock, NULL, MUTEX_DRIVER, 163 (void *)(intptr_t)__ipltospl(SPL7 - 1)); 164 if ((ret = mod_install(&modlinkage)) != 0) { 165 mutex_destroy(&ra_lock); 166 } 167 return (ret); 168 } 169 170 int 171 _fini() 172 { 173 int ret; 174 175 mutex_enter(&ra_lock); 176 177 if (ra_map_list_head != NULL) { 178 mutex_exit(&ra_lock); 179 return (EBUSY); 180 } 181 182 ret = mod_remove(&modlinkage); 183 184 mutex_exit(&ra_lock); 185 186 if (ret == 0) 187 mutex_destroy(&ra_lock); 188 189 return (ret); 190 } 191 192 int 193 _info(struct modinfo *modinfop) 194 195 { 196 return (mod_info(&modlinkage, modinfop)); 197 } 198 199 /* 200 * set up an empty resource map for a given type and dip 201 */ 202 int 203 ndi_ra_map_setup(dev_info_t *dip, char *type) 204 { 205 struct ra_type_map *typemapp; 206 struct ra_dip_type *dipmap; 207 struct ra_dip_type **backdip; 208 struct ra_type_map **backtype; 209 210 211 mutex_enter(&ra_lock); 212 213 dipmap = find_dip_map_resources(dip, type, &backdip, &backtype, 0); 214 215 if (dipmap == NULL) { 216 if (backtype == NULL) { 217 typemapp = (struct ra_type_map *) 218 kmem_zalloc(sizeof (*typemapp), KM_SLEEP); 219 typemapp->type = (char *)kmem_zalloc(strlen(type) + 1, 220 KM_SLEEP); 221 (void) strcpy(typemapp->type, type); 222 RA_INSERT(&ra_map_list_head, typemapp); 223 } else { 224 typemapp = *backtype; 225 } 226 if (backdip == NULL) { 227 /* allocate and insert in list of dips for this type */ 228 dipmap = (struct ra_dip_type *) 229 kmem_zalloc(sizeof (*dipmap), KM_SLEEP); 230 dipmap->ra_dip = dip; 231 RA_INSERT(&typemapp->ra_dip_list, dipmap); 232 } 233 } 234 235 mutex_exit(&ra_lock); 236 return (NDI_SUCCESS); 237 } 238 239 /* 240 * destroys a resource map for a given dip and type 241 */ 242 int 243 ndi_ra_map_destroy(dev_info_t *dip, char *type) 244 { 245 struct ra_dip_type *dipmap; 246 struct ra_dip_type **backdip; 247 struct ra_type_map **backtype, *typemap; 248 struct ra_resource *range; 249 250 mutex_enter(&ra_lock); 251 dipmap = find_dip_map_resources(dip, type, &backdip, &backtype, 0); 252 253 if (dipmap == NULL) { 254 mutex_exit(&ra_lock); 255 return (NDI_FAILURE); 256 } 257 258 /* 259 * destroy all resources for this dip 260 * remove dip from type list 261 */ 262 ASSERT((backdip != NULL) && (backtype != NULL)); 263 while (dipmap->ra_rangeset != NULL) { 264 range = dipmap->ra_rangeset; 265 RA_REMOVE(&dipmap->ra_rangeset, range); 266 kmem_free((caddr_t)range, sizeof (*range)); 267 } 268 /* remove from dip list */ 269 RA_REMOVE(backdip, dipmap); 270 kmem_free((caddr_t)dipmap, sizeof (*dipmap)); 271 if ((*backtype)->ra_dip_list == NULL) { 272 /* 273 * This was the last dip with this resource type. 274 * Remove the type from the global list. 275 */ 276 typemap = *backtype; 277 RA_REMOVE(backtype, (*backtype)); 278 kmem_free((caddr_t)typemap->type, strlen(typemap->type) + 1); 279 kmem_free((caddr_t)typemap, sizeof (*typemap)); 280 } 281 282 mutex_exit(&ra_lock); 283 return (NDI_SUCCESS); 284 } 285 286 static int 287 ra_map_exist(dev_info_t *dip, char *type) 288 { 289 struct ra_dip_type **backdip; 290 struct ra_type_map **backtype; 291 292 mutex_enter(&ra_lock); 293 if (find_dip_map_resources(dip, type, &backdip, &backtype, 0) == NULL) { 294 mutex_exit(&ra_lock); 295 return (NDI_FAILURE); 296 } 297 298 mutex_exit(&ra_lock); 299 return (NDI_SUCCESS); 300 } 301 /* 302 * Find a dip map for the specified type, if NDI_RA_PASS will go up on dev tree 303 * if found, backdip and backtype will be updated to point to the previous 304 * dip in the list and previous type for this dip in the list. 305 * If no such type at all in the resource list both backdip and backtype 306 * will be null. If the type found but no dip, back dip will be null. 307 */ 308 309 static struct ra_dip_type * 310 find_dip_map_resources(dev_info_t *dip, char *type, 311 struct ra_dip_type ***backdip, struct ra_type_map ***backtype, 312 uint32_t flag) 313 { 314 struct ra_type_map **prevmap; 315 struct ra_dip_type *dipmap, **prevdip; 316 317 ASSERT(mutex_owned(&ra_lock)); 318 prevdip = NULL; 319 dipmap = NULL; 320 prevmap = &ra_map_list_head; 321 322 while (*prevmap) { 323 if (strcmp((*prevmap)->type, type) == 0) 324 break; 325 prevmap = &(*prevmap)->ra_next; 326 } 327 328 if (*prevmap) { 329 for (; dip != NULL; dip = ddi_get_parent(dip)) { 330 prevdip = &(*prevmap)->ra_dip_list; 331 dipmap = *prevdip; 332 333 while (dipmap) { 334 if (dipmap->ra_dip == dip) 335 break; 336 prevdip = &dipmap->ra_next; 337 dipmap = dipmap->ra_next; 338 } 339 340 if (dipmap != NULL) { 341 /* found it */ 342 break; 343 } 344 345 if (!(flag & NDI_RA_PASS)) { 346 break; 347 } 348 } 349 } 350 351 *backtype = (*prevmap == NULL) ? NULL: prevmap; 352 *backdip = (dipmap == NULL) ? NULL: prevdip; 353 354 return (dipmap); 355 } 356 357 int 358 ndi_ra_free(dev_info_t *dip, uint64_t base, uint64_t len, char *type, 359 uint32_t flag) 360 { 361 struct ra_dip_type *dipmap; 362 struct ra_resource *newmap, *overlapmap, *oldmap = NULL; 363 struct ra_resource *mapp, **backp; 364 uint64_t newend, mapend; 365 struct ra_dip_type **backdip; 366 struct ra_type_map **backtype; 367 368 if (len == 0) { 369 return (NDI_SUCCESS); 370 } 371 372 mutex_enter(&ra_lock); 373 374 if ((dipmap = find_dip_map_resources(dip, type, &backdip, &backtype, 375 flag)) == NULL) { 376 mutex_exit(&ra_lock); 377 return (NDI_FAILURE); 378 } 379 380 mapp = dipmap->ra_rangeset; 381 backp = &dipmap->ra_rangeset; 382 383 /* now find where range lies and fix things up */ 384 newend = base + len; 385 for (; mapp != NULL; backp = &(mapp->ra_next), mapp = mapp->ra_next) { 386 mapend = mapp->ra_base + mapp->ra_len; 387 388 /* check for overlap first */ 389 if ((base <= mapp->ra_base && newend > mapp->ra_base) || 390 (base > mapp->ra_base && base < mapend)) { 391 /* overlap with mapp */ 392 overlapmap = mapp; 393 goto overlap; 394 } else if ((base == mapend && mapp->ra_next) && 395 (newend > mapp->ra_next->ra_base)) { 396 /* overlap with mapp->ra_next */ 397 overlapmap = mapp->ra_next; 398 goto overlap; 399 } 400 401 if (newend == mapp->ra_base) { 402 /* simple - on front */ 403 mapp->ra_base = base; 404 mapp->ra_len += len; 405 /* 406 * don't need to check if it merges with 407 * previous since that would match on on end 408 */ 409 break; 410 } else if (base == mapend) { 411 /* simple - on end */ 412 mapp->ra_len += len; 413 if (mapp->ra_next && 414 (newend == mapp->ra_next->ra_base)) { 415 /* merge with next node */ 416 oldmap = mapp->ra_next; 417 mapp->ra_len += oldmap->ra_len; 418 RA_REMOVE(&mapp->ra_next, oldmap); 419 kmem_free((caddr_t)oldmap, sizeof (*oldmap)); 420 } 421 break; 422 } else if (base < mapp->ra_base) { 423 /* somewhere in between so just an insert */ 424 newmap = (struct ra_resource *) 425 kmem_zalloc(sizeof (*newmap), KM_SLEEP); 426 newmap->ra_base = base; 427 newmap->ra_len = len; 428 RA_INSERT(backp, newmap); 429 break; 430 } 431 } 432 if (mapp == NULL) { 433 /* stick on end */ 434 newmap = (struct ra_resource *) 435 kmem_zalloc(sizeof (*newmap), KM_SLEEP); 436 newmap->ra_base = base; 437 newmap->ra_len = len; 438 RA_INSERT(backp, newmap); 439 } 440 441 mutex_exit(&ra_lock); 442 443 /* 444 * Update dip's "available" property, adding this piece of 445 * resource to the pool. 446 */ 447 (void) pci_put_available_prop(dip, base, len, type); 448 done: 449 return (NDI_SUCCESS); 450 451 overlap: 452 /* 453 * Bad free may happen on some x86 platforms with BIOS exporting 454 * incorrect resource maps. The system is otherwise functioning 455 * normally. We send such messages to syslog only. 456 */ 457 cmn_err(CE_NOTE, "!ndi_ra_free: bad free, dip %p, resource type %s \n", 458 (void *)dip, type); 459 cmn_err(CE_NOTE, "!ndi_ra_free: freeing base 0x%" PRIx64 ", len 0x%" 460 PRIX64 " overlaps with existing resource base 0x%" PRIx64 461 ", len 0x%" PRIx64 "\n", base, len, overlapmap->ra_base, 462 overlapmap->ra_len); 463 464 mutex_exit(&ra_lock); 465 return (NDI_FAILURE); 466 } 467 468 /* check to see if value is power of 2 or not. */ 469 static int 470 isnot_pow2(uint64_t value) 471 { 472 uint32_t low; 473 uint32_t hi; 474 475 low = value & 0xffffffff; 476 hi = value >> 32; 477 478 /* 479 * ddi_ffs and ddi_fls gets long values, so in 32bit environment 480 * won't work correctly for 64bit values 481 */ 482 if ((ddi_ffs(low) == ddi_fls(low)) && 483 (ddi_ffs(hi) == ddi_fls(hi))) 484 return (0); 485 return (1); 486 } 487 488 static void 489 adjust_link(struct ra_resource **backp, struct ra_resource *mapp, 490 uint64_t base, uint64_t len) 491 { 492 struct ra_resource *newmap; 493 uint64_t newlen; 494 495 if (base != mapp->ra_base) { 496 /* in the middle or end */ 497 newlen = base - mapp->ra_base; 498 if ((mapp->ra_len - newlen) == len) { 499 /* on the end */ 500 mapp->ra_len = newlen; 501 } else { 502 /* in the middle */ 503 newmap = (struct ra_resource *) 504 kmem_zalloc(sizeof (*newmap), KM_SLEEP); 505 newmap->ra_base = base + len; 506 newmap->ra_len = mapp->ra_len - (len + newlen); 507 mapp->ra_len = newlen; 508 RA_INSERT(&(mapp->ra_next), newmap); 509 } 510 } else { 511 /* at the beginning */ 512 mapp->ra_base += len; 513 mapp->ra_len -= len; 514 if (mapp->ra_len == 0) { 515 /* remove the whole node */ 516 RA_REMOVE(backp, mapp); 517 kmem_free((caddr_t)mapp, sizeof (*mapp)); 518 } 519 } 520 } 521 522 int 523 ndi_ra_alloc(dev_info_t *dip, ndi_ra_request_t *req, uint64_t *retbasep, 524 uint64_t *retlenp, char *type, uint32_t flag) 525 { 526 struct ra_dip_type *dipmap; 527 struct ra_resource *mapp, **backp, **backlargestp; 528 uint64_t mask = 0; 529 uint64_t len, remlen, largestbase, largestlen; 530 uint64_t base, oldbase, lower, upper; 531 struct ra_dip_type **backdip; 532 struct ra_type_map **backtype; 533 int rval = NDI_FAILURE; 534 535 536 len = req->ra_len; 537 538 if (req->ra_flags & NDI_RA_ALIGN_SIZE) { 539 if (isnot_pow2(req->ra_len)) { 540 DEBUGPRT(CE_WARN, "ndi_ra_alloc: bad length(pow2) 0x%" 541 PRIx64, req->ra_len); 542 *retbasep = 0; 543 *retlenp = 0; 544 return (NDI_FAILURE); 545 } 546 } 547 548 mask = (req->ra_flags & NDI_RA_ALIGN_SIZE) ? (len - 1) : 549 req->ra_align_mask; 550 551 552 mutex_enter(&ra_lock); 553 dipmap = find_dip_map_resources(dip, type, &backdip, &backtype, flag); 554 if ((dipmap == NULL) || ((mapp = dipmap->ra_rangeset) == NULL)) { 555 mutex_exit(&ra_lock); 556 DEBUGPRT(CE_CONT, "ndi_ra_alloc no map found for this type\n"); 557 return (NDI_FAILURE); 558 } 559 560 DEBUGPRT(CE_CONT, "ndi_ra_alloc: mapp = %p len=%" PRIx64 ", mask=%" 561 PRIx64 "\n", (void *)mapp, len, mask); 562 563 backp = &(dipmap->ra_rangeset); 564 backlargestp = NULL; 565 largestbase = 0; 566 largestlen = 0; 567 568 lower = 0; 569 upper = ~(uint64_t)0; 570 571 if (req->ra_flags & NDI_RA_ALLOC_BOUNDED) { 572 /* bounded so skip to first possible */ 573 lower = req->ra_boundbase; 574 upper = req->ra_boundlen + lower; 575 if ((upper == 0) || (upper < req->ra_boundlen)) 576 upper = ~(uint64_t)0; 577 DEBUGPRT(CE_CONT, "ndi_ra_alloc: ra_len = %" PRIx64 ", len = %" 578 PRIx64 " ra_base=%" PRIx64 ", mask=%" PRIx64 579 "\n", mapp->ra_len, len, mapp->ra_base, mask); 580 for (; mapp != NULL && (mapp->ra_base + mapp->ra_len) < lower; 581 backp = &(mapp->ra_next), mapp = mapp->ra_next) { 582 if (((mapp->ra_len + mapp->ra_base) == 0) || 583 ((mapp->ra_len + mapp->ra_base) < mapp->ra_len)) 584 /* 585 * This elements end goes beyond max uint64_t. 586 * potential candidate, check end against lower 587 * would not be precise. 588 */ 589 break; 590 591 DEBUGPRT(CE_CONT, " ra_len = %" PRIx64 ", ra_base=%" 592 PRIx64 "\n", mapp->ra_len, mapp->ra_base); 593 } 594 595 } 596 597 if (!(req->ra_flags & NDI_RA_ALLOC_SPECIFIED)) { 598 /* first fit - not user specified */ 599 DEBUGPRT(CE_CONT, "ndi_ra_alloc(unspecified request)" 600 "lower=%" PRIx64 ", upper=%" PRIx64 "\n", lower, upper); 601 for (; mapp != NULL && mapp->ra_base <= upper; 602 backp = &(mapp->ra_next), mapp = mapp->ra_next) { 603 604 DEBUGPRT(CE_CONT, "ndi_ra_alloc: ra_len = %" PRIx64 605 ", len = %" PRIx64 "", mapp->ra_len, len); 606 base = mapp->ra_base; 607 if (base < lower) { 608 base = lower; 609 DEBUGPRT(CE_CONT, "\tbase=%" PRIx64 610 ", ra_base=%" PRIx64 ", mask=%" PRIx64, 611 base, mapp->ra_base, mask); 612 } 613 614 if ((base & mask) != 0) { 615 oldbase = base; 616 /* 617 * failed a critical constraint 618 * adjust and see if it still fits 619 */ 620 base = base & ~mask; 621 base += (mask + 1); 622 DEBUGPRT(CE_CONT, "\tnew base=%" PRIx64 "\n", 623 base); 624 625 /* 626 * Check to see if the new base is past 627 * the end of the resource. 628 */ 629 if (base >= (oldbase + mapp->ra_len + 1)) { 630 continue; 631 } 632 } 633 634 if (req->ra_flags & NDI_RA_ALLOC_PARTIAL_OK) { 635 if ((upper - mapp->ra_base) < mapp->ra_len) 636 remlen = upper - base; 637 else 638 remlen = mapp->ra_len - 639 (base - mapp->ra_base); 640 641 if ((backlargestp == NULL) || 642 (largestlen < remlen)) { 643 644 backlargestp = backp; 645 largestbase = base; 646 largestlen = remlen; 647 } 648 } 649 650 if (mapp->ra_len >= len) { 651 /* a candidate -- apply constraints */ 652 if ((len > (mapp->ra_len - 653 (base - mapp->ra_base))) || 654 ((len - 1 + base) > upper)) { 655 continue; 656 } 657 658 /* we have a fit */ 659 660 DEBUGPRT(CE_CONT, "\thave a fit\n"); 661 662 adjust_link(backp, mapp, base, len); 663 rval = NDI_SUCCESS; 664 break; 665 666 } 667 } 668 } else { 669 /* want an exact value/fit */ 670 base = req->ra_addr; 671 len = req->ra_len; 672 for (; mapp != NULL && mapp->ra_base <= upper; 673 backp = &(mapp->ra_next), mapp = mapp->ra_next) { 674 if (base >= mapp->ra_base && 675 ((base - mapp->ra_base) < mapp->ra_len)) { 676 /* 677 * This is the node with he requested base in 678 * its range 679 */ 680 if ((len > mapp->ra_len) || 681 (base - mapp->ra_base > 682 mapp->ra_len - len)) { 683 /* length requirement not satisfied */ 684 if (req->ra_flags & 685 NDI_RA_ALLOC_PARTIAL_OK) { 686 if ((upper - mapp->ra_base) 687 < mapp->ra_len) 688 remlen = upper - base; 689 else 690 remlen = 691 mapp->ra_len - 692 (base - 693 mapp->ra_base); 694 } 695 backlargestp = backp; 696 largestbase = base; 697 largestlen = remlen; 698 base = 0; 699 } else { 700 /* We have a match */ 701 adjust_link(backp, mapp, base, len); 702 rval = NDI_SUCCESS; 703 } 704 break; 705 } 706 } 707 } 708 709 if ((rval != NDI_SUCCESS) && 710 (req->ra_flags & NDI_RA_ALLOC_PARTIAL_OK) && 711 (backlargestp != NULL)) { 712 adjust_link(backlargestp, *backlargestp, largestbase, 713 largestlen); 714 715 base = largestbase; 716 len = largestlen; 717 rval = NDI_RA_PARTIAL_REQ; 718 } 719 720 mutex_exit(&ra_lock); 721 722 if (rval == NDI_FAILURE) { 723 *retbasep = 0; 724 *retlenp = 0; 725 } else { 726 *retbasep = base; 727 *retlenp = len; 728 } 729 730 /* 731 * Update dip's "available" property, substract this piece of 732 * resource from the pool. 733 */ 734 if ((rval == NDI_SUCCESS) || (rval == NDI_RA_PARTIAL_REQ)) 735 (void) pci_get_available_prop(dip, *retbasep, *retlenp, type); 736 737 return (rval); 738 } 739 740 /* 741 * isa_resource_setup 742 * check for /used-resources and initialize 743 * based on info there. If no /used-resources, 744 * fail. 745 */ 746 int 747 isa_resource_setup() 748 { 749 dev_info_t *used, *usedpdip; 750 /* 751 * note that at this time bootconf creates 32 bit properties for 752 * io-space and device-memory 753 */ 754 struct iorange { 755 uint32_t base; 756 uint32_t len; 757 } *iorange; 758 struct memrange { 759 uint32_t base; 760 uint32_t len; 761 } *memrange; 762 uint32_t *irq; 763 int proplen; 764 int i, len; 765 int maxrange; 766 ndi_ra_request_t req; 767 uint64_t retbase; 768 uint64_t retlen; 769 770 used = ddi_find_devinfo("used-resources", -1, 0); 771 if (used == NULL) { 772 DEBUGPRT(CE_CONT, 773 "isa_resource_setup: used-resources not found"); 774 return (NDI_FAILURE); 775 } 776 777 /* 778 * initialize to all resources being present 779 * and then remove the ones in use. 780 */ 781 782 usedpdip = ddi_root_node(); 783 784 DEBUGPRT(CE_CONT, "isa_resource_setup: used = %p usedpdip = %p\n", 785 (void *)used, (void *)usedpdip); 786 787 if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_IO) == NDI_FAILURE) { 788 return (NDI_FAILURE); 789 } 790 791 /* initialize io space, highest end base is 0xffff */ 792 /* note that length is highest addr + 1 since starts from 0 */ 793 794 (void) ndi_ra_free(usedpdip, 0, 0xffff + 1, NDI_RA_TYPE_IO, 0); 795 796 if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS, 797 "io-space", (caddr_t)&iorange, &proplen) == DDI_SUCCESS) { 798 maxrange = proplen / sizeof (struct iorange); 799 /* remove the "used" I/O resources */ 800 for (i = 0; i < maxrange; i++) { 801 bzero((caddr_t)&req, sizeof (req)); 802 req.ra_addr = (uint64_t)iorange[i].base; 803 req.ra_len = (uint64_t)iorange[i].len; 804 req.ra_flags = NDI_RA_ALLOC_SPECIFIED; 805 (void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen, 806 NDI_RA_TYPE_IO, 0); 807 } 808 809 kmem_free((caddr_t)iorange, proplen); 810 } 811 812 if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_MEM) == NDI_FAILURE) { 813 return (NDI_FAILURE); 814 } 815 /* initialize memory space where highest end base is 0xffffffff */ 816 /* note that length is highest addr + 1 since starts from 0 */ 817 (void) ndi_ra_free(usedpdip, 0, ((uint64_t)((uint32_t)~0)) + 1, 818 NDI_RA_TYPE_MEM, 0); 819 820 if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS, 821 "device-memory", (caddr_t)&memrange, &proplen) == DDI_SUCCESS) { 822 maxrange = proplen / sizeof (struct memrange); 823 /* remove the "used" memory resources */ 824 for (i = 0; i < maxrange; i++) { 825 bzero((caddr_t)&req, sizeof (req)); 826 req.ra_addr = (uint64_t)memrange[i].base; 827 req.ra_len = (uint64_t)memrange[i].len; 828 req.ra_flags = NDI_RA_ALLOC_SPECIFIED; 829 (void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen, 830 NDI_RA_TYPE_MEM, 0); 831 } 832 833 kmem_free((caddr_t)memrange, proplen); 834 } 835 836 if (ndi_ra_map_setup(usedpdip, NDI_RA_TYPE_INTR) == NDI_FAILURE) { 837 return (NDI_FAILURE); 838 } 839 840 /* initialize the interrupt space */ 841 (void) ndi_ra_free(usedpdip, 0, 16, NDI_RA_TYPE_INTR, 0); 842 843 #if defined(__i386) || defined(__amd64) 844 bzero(&req, sizeof (req)); 845 req.ra_addr = 2; /* 2 == 9 so never allow */ 846 req.ra_len = 1; 847 req.ra_flags = NDI_RA_ALLOC_SPECIFIED; 848 (void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen, 849 NDI_RA_TYPE_INTR, 0); 850 #endif 851 852 if (ddi_getlongprop(DDI_DEV_T_ANY, used, DDI_PROP_DONTPASS, 853 "interrupts", (caddr_t)&irq, &proplen) == DDI_SUCCESS) { 854 /* Initialize available interrupts by negating the used */ 855 len = (proplen / sizeof (uint32_t)); 856 for (i = 0; i < len; i++) { 857 bzero((caddr_t)&req, sizeof (req)); 858 req.ra_addr = (uint64_t)irq[i]; 859 req.ra_len = 1; 860 req.ra_flags = NDI_RA_ALLOC_SPECIFIED; 861 (void) ndi_ra_alloc(usedpdip, &req, &retbase, &retlen, 862 NDI_RA_TYPE_INTR, 0); 863 } 864 kmem_free((caddr_t)irq, proplen); 865 } 866 867 #ifdef BUSRA_DEBUG 868 if (busra_debug) { 869 (void) ra_dump_all(NULL, usedpdip); 870 } 871 #endif 872 return (NDI_SUCCESS); 873 874 } 875 876 #ifdef BUSRA_DEBUG 877 void 878 ra_dump_all(char *type, dev_info_t *dip) 879 { 880 881 struct ra_type_map *typemap; 882 struct ra_dip_type *dipmap; 883 struct ra_resource *res; 884 885 typemap = (struct ra_type_map *)ra_map_list_head; 886 887 for (; typemap != NULL; typemap = typemap->ra_next) { 888 if (type != NULL) { 889 if (strcmp(typemap->type, type) != 0) 890 continue; 891 } 892 cmn_err(CE_CONT, "type is %s\n", typemap->type); 893 for (dipmap = typemap->ra_dip_list; dipmap != NULL; 894 dipmap = dipmap->ra_next) { 895 if (dip != NULL) { 896 if ((dipmap->ra_dip) != dip) 897 continue; 898 } 899 cmn_err(CE_CONT, " dip is %p\n", 900 (void *)dipmap->ra_dip); 901 for (res = dipmap->ra_rangeset; res != NULL; 902 res = res->ra_next) { 903 cmn_err(CE_CONT, "\t range is %" PRIx64 904 " %" PRIx64 "\n", res->ra_base, 905 res->ra_len); 906 } 907 if (dip != NULL) 908 break; 909 } 910 if (type != NULL) 911 break; 912 } 913 } 914 #endif 915 916 struct bus_range { /* 1275 "bus-range" property definition */ 917 uint32_t lo; 918 uint32_t hi; 919 } pci_bus_range; 920 921 struct busnum_ctrl { 922 int rv; 923 dev_info_t *dip; 924 struct bus_range *range; 925 }; 926 927 928 /* 929 * Setup resource map for the pci bus node based on the "available" 930 * property and "bus-range" property. 931 */ 932 int 933 pci_resource_setup(dev_info_t *dip) 934 { 935 pci_regspec_t *regs; 936 int rlen, rcount, i; 937 char bus_type[16] = "(unknown)"; 938 int len; 939 struct busnum_ctrl ctrl; 940 int circular_count; 941 int rval = NDI_SUCCESS; 942 943 /* 944 * If this is a pci bus node then look for "available" property 945 * to find the available resources on this bus. 946 */ 947 len = sizeof (bus_type); 948 if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF, 949 DDI_PROP_CANSLEEP | DDI_PROP_DONTPASS, "device_type", 950 (caddr_t)&bus_type, &len) != DDI_SUCCESS) 951 return (NDI_FAILURE); 952 953 /* it is not a pci/pci-ex bus type */ 954 if ((strcmp(bus_type, "pci") != 0) && (strcmp(bus_type, "pciex") != 0)) 955 return (NDI_FAILURE); 956 957 /* 958 * The pci-hotplug project addresses adding the call 959 * to pci_resource_setup from pci nexus driver. 960 * However that project would initially be only for x86, 961 * so for sparc pcmcia-pci support we still need to call 962 * pci_resource_setup in pcic driver. Once all pci nexus drivers 963 * are updated to call pci_resource_setup this portion of the 964 * code would really become an assert to make sure this 965 * function is not called for the same dip twice. 966 */ 967 /* 968 * Another user for the check below is hotplug PCI/PCIe bridges. 969 * 970 * For PCI/PCIE devices under a PCIE hierarchy, ndi_ra_alloc/free 971 * will update the devinfo node's "available" property, to reflect 972 * the fact that a piece of resource has been removed/added to 973 * a devinfo node. 974 * During probe of a new PCI bridge in the hotplug case, PCI 975 * configurator firstly allocates maximum MEM/IO from its parent, 976 * then calls ndi_ra_free() to use these resources to setup busra 977 * pool for the new bridge, as well as adding these resources to 978 * the "available" property of the new devinfo node. Then configu- 979 * rator will attach driver for the bridge before probing its 980 * children, and the bridge driver will then initialize its hotplug 981 * contollers (if it supports hotplug) and HPC driver will call 982 * this function to setup the busra pool, but the resource pool 983 * has already been setup at the first of pcicfg_probe_bridge(), 984 * thus we need the check below to return directly in this case. 985 * Otherwise the ndi_ra_free() below will see overlapping resources. 986 */ 987 { 988 if (ra_map_exist(dip, NDI_RA_TYPE_MEM) == NDI_SUCCESS) { 989 return (NDI_FAILURE); 990 } 991 } 992 993 994 /* 995 * Create empty resource maps first. 996 * 997 * NOTE: If all the allocated resources are already assigned to 998 * device(s) in the hot plug slot then "available" property may not 999 * be present. But, subsequent hot plug operation may unconfigure 1000 * the device in the slot and try to free up it's resources. So, 1001 * at the minimum we should create empty maps here. 1002 */ 1003 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_MEM) == NDI_FAILURE) { 1004 return (NDI_FAILURE); 1005 } 1006 1007 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_IO) == NDI_FAILURE) { 1008 return (NDI_FAILURE); 1009 } 1010 1011 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_BUSNUM) == NDI_FAILURE) { 1012 return (NDI_FAILURE); 1013 } 1014 1015 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM) == 1016 NDI_FAILURE) { 1017 return (NDI_FAILURE); 1018 } 1019 1020 /* read the "available" property if it is available */ 1021 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1022 "available", (caddr_t)®s, &rlen) == DDI_SUCCESS) { 1023 /* 1024 * Remove "available" property as the entries will be 1025 * re-created in ndi_ra_free() below, note prom based 1026 * property will not be removed. But in ndi_ra_free() 1027 * we'll be creating non prom based property entries. 1028 */ 1029 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "available"); 1030 /* 1031 * create the available resource list for both memory and 1032 * io space 1033 */ 1034 rcount = rlen / sizeof (pci_regspec_t); 1035 for (i = 0; i < rcount; i++) { 1036 switch (PCI_REG_ADDR_G(regs[i].pci_phys_hi)) { 1037 case PCI_REG_ADDR_G(PCI_ADDR_MEM32): 1038 (void) ndi_ra_free(dip, 1039 (uint64_t)regs[i].pci_phys_low, 1040 (uint64_t)regs[i].pci_size_low, 1041 (regs[i].pci_phys_hi & PCI_REG_PF_M) ? 1042 NDI_RA_TYPE_PCI_PREFETCH_MEM : 1043 NDI_RA_TYPE_MEM, 1044 0); 1045 break; 1046 case PCI_REG_ADDR_G(PCI_ADDR_MEM64): 1047 (void) ndi_ra_free(dip, 1048 ((uint64_t)(regs[i].pci_phys_mid) << 32) | 1049 ((uint64_t)(regs[i].pci_phys_low)), 1050 ((uint64_t)(regs[i].pci_size_hi) << 32) | 1051 ((uint64_t)(regs[i].pci_size_low)), 1052 (regs[i].pci_phys_hi & PCI_REG_PF_M) ? 1053 NDI_RA_TYPE_PCI_PREFETCH_MEM : 1054 NDI_RA_TYPE_MEM, 1055 0); 1056 break; 1057 case PCI_REG_ADDR_G(PCI_ADDR_IO): 1058 (void) ndi_ra_free(dip, 1059 (uint64_t)regs[i].pci_phys_low, 1060 (uint64_t)regs[i].pci_size_low, 1061 NDI_RA_TYPE_IO, 1062 0); 1063 break; 1064 case PCI_REG_ADDR_G(PCI_ADDR_CONFIG): 1065 break; 1066 default: 1067 cmn_err(CE_WARN, 1068 "pci_resource_setup: bad addr type: %x\n", 1069 PCI_REG_ADDR_G(regs[i].pci_phys_hi)); 1070 break; 1071 } 1072 } 1073 kmem_free(regs, rlen); 1074 } 1075 1076 /* 1077 * update resource map for available bus numbers if the node 1078 * has available-bus-range or bus-range property. 1079 */ 1080 len = sizeof (struct bus_range); 1081 if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1082 "available-bus-range", (caddr_t)&pci_bus_range, &len) == 1083 DDI_SUCCESS) { 1084 /* 1085 * Add bus numbers in the range to the free list. 1086 */ 1087 (void) ndi_ra_free(dip, (uint64_t)pci_bus_range.lo, 1088 (uint64_t)pci_bus_range.hi - (uint64_t)pci_bus_range.lo + 1089 1, NDI_RA_TYPE_PCI_BUSNUM, 0); 1090 } else { 1091 /* 1092 * We don't have an available-bus-range property. If, instead, 1093 * we have a bus-range property we add all the bus numbers 1094 * in that range to the free list but we must then scan 1095 * for pci-pci bridges on this bus to find out the if there 1096 * are any of those bus numbers already in use. If so, we can 1097 * reclaim them. 1098 */ 1099 len = sizeof (struct bus_range); 1100 if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, 1101 DDI_PROP_DONTPASS, "bus-range", (caddr_t)&pci_bus_range, 1102 &len) == DDI_SUCCESS) { 1103 if (pci_bus_range.lo != pci_bus_range.hi) { 1104 /* 1105 * Add bus numbers other than the secondary 1106 * bus number to the free list. 1107 */ 1108 (void) ndi_ra_free(dip, 1109 (uint64_t)pci_bus_range.lo + 1, 1110 (uint64_t)pci_bus_range.hi - 1111 (uint64_t)pci_bus_range.lo, 1112 NDI_RA_TYPE_PCI_BUSNUM, 0); 1113 1114 /* scan for pci-pci bridges */ 1115 ctrl.rv = DDI_SUCCESS; 1116 ctrl.dip = dip; 1117 ctrl.range = &pci_bus_range; 1118 ndi_devi_enter(dip, &circular_count); 1119 ddi_walk_devs(ddi_get_child(dip), 1120 claim_pci_busnum, (void *)&ctrl); 1121 ndi_devi_exit(dip, circular_count); 1122 if (ctrl.rv != DDI_SUCCESS) { 1123 /* failed to create the map */ 1124 (void) ndi_ra_map_destroy(dip, 1125 NDI_RA_TYPE_PCI_BUSNUM); 1126 rval = NDI_FAILURE; 1127 } 1128 } 1129 } 1130 } 1131 1132 #ifdef BUSRA_DEBUG 1133 if (busra_debug) { 1134 (void) ra_dump_all(NULL, dip); 1135 } 1136 #endif 1137 1138 return (rval); 1139 } 1140 1141 /* 1142 * If the device is a PCI bus device (i.e bus-range property exists) then 1143 * claim the bus numbers used by the device from the specified bus 1144 * resource map. 1145 */ 1146 static int 1147 claim_pci_busnum(dev_info_t *dip, void *arg) 1148 { 1149 struct bus_range pci_bus_range; 1150 struct busnum_ctrl *ctrl; 1151 ndi_ra_request_t req; 1152 char bus_type[16] = "(unknown)"; 1153 int len; 1154 uint64_t base; 1155 uint64_t retlen; 1156 1157 ctrl = (struct busnum_ctrl *)arg; 1158 1159 /* check if this is a PCI bus node */ 1160 len = sizeof (bus_type); 1161 if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF, 1162 DDI_PROP_CANSLEEP | DDI_PROP_DONTPASS, "device_type", 1163 (caddr_t)&bus_type, &len) != DDI_SUCCESS) 1164 return (DDI_WALK_PRUNECHILD); 1165 1166 /* it is not a pci/pci-ex bus type */ 1167 if ((strcmp(bus_type, "pci") != 0) && (strcmp(bus_type, "pciex") != 0)) 1168 return (DDI_WALK_PRUNECHILD); 1169 1170 /* look for the bus-range property */ 1171 len = sizeof (struct bus_range); 1172 if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1173 "bus-range", (caddr_t)&pci_bus_range, &len) == DDI_SUCCESS) { 1174 if ((pci_bus_range.lo >= ctrl->range->lo) && 1175 (pci_bus_range.hi <= ctrl->range->hi)) { 1176 1177 /* claim the bus range from the bus resource map */ 1178 bzero((caddr_t)&req, sizeof (req)); 1179 req.ra_addr = (uint64_t)pci_bus_range.lo; 1180 req.ra_flags |= NDI_RA_ALLOC_SPECIFIED; 1181 req.ra_len = (uint64_t)pci_bus_range.hi - 1182 (uint64_t)pci_bus_range.lo + 1; 1183 if (ndi_ra_alloc(ctrl->dip, &req, &base, &retlen, 1184 NDI_RA_TYPE_PCI_BUSNUM, 0) == NDI_SUCCESS) 1185 return (DDI_WALK_PRUNECHILD); 1186 } 1187 } 1188 1189 /* 1190 * Error return. 1191 */ 1192 ctrl->rv = DDI_FAILURE; 1193 return (DDI_WALK_TERMINATE); 1194 } 1195 1196 void 1197 pci_resource_destroy(dev_info_t *dip) 1198 { 1199 (void) ndi_ra_map_destroy(dip, NDI_RA_TYPE_IO); 1200 1201 (void) ndi_ra_map_destroy(dip, NDI_RA_TYPE_MEM); 1202 1203 (void) ndi_ra_map_destroy(dip, NDI_RA_TYPE_PCI_BUSNUM); 1204 1205 (void) ndi_ra_map_destroy(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM); 1206 } 1207 1208 1209 int 1210 pci_resource_setup_avail(dev_info_t *dip, pci_regspec_t *avail_p, int entries) 1211 { 1212 int i; 1213 1214 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_MEM) == NDI_FAILURE) 1215 return (NDI_FAILURE); 1216 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_IO) == NDI_FAILURE) 1217 return (NDI_FAILURE); 1218 if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM) == NDI_FAILURE) 1219 return (NDI_FAILURE); 1220 1221 /* for each entry in the PCI "available" property */ 1222 for (i = 0; i < entries; i++, avail_p++) { 1223 if (avail_p->pci_phys_hi == -1u) 1224 goto err; 1225 1226 switch (PCI_REG_ADDR_G(avail_p->pci_phys_hi)) { 1227 case PCI_REG_ADDR_G(PCI_ADDR_MEM32): { 1228 (void) ndi_ra_free(dip, (uint64_t)avail_p->pci_phys_low, 1229 (uint64_t)avail_p->pci_size_low, 1230 (avail_p->pci_phys_hi & PCI_REG_PF_M) ? 1231 NDI_RA_TYPE_PCI_PREFETCH_MEM : NDI_RA_TYPE_MEM, 1232 0); 1233 } 1234 break; 1235 case PCI_REG_ADDR_G(PCI_ADDR_IO): 1236 (void) ndi_ra_free(dip, (uint64_t)avail_p->pci_phys_low, 1237 (uint64_t)avail_p->pci_size_low, NDI_RA_TYPE_IO, 0); 1238 break; 1239 default: 1240 goto err; 1241 } 1242 } 1243 #ifdef BUSRA_DEBUG 1244 if (busra_debug) { 1245 (void) ra_dump_all(NULL, dip); 1246 } 1247 #endif 1248 return (NDI_SUCCESS); 1249 1250 err: 1251 cmn_err(CE_WARN, "pci_resource_setup_avail: bad entry[%d]=%x\n", 1252 i, avail_p->pci_phys_hi); 1253 return (NDI_FAILURE); 1254 } 1255 1256 /* 1257 * Return true if the devinfo node resides on PCI or PCI Express bus, 1258 * sitting in a PCI Express hierarchy. 1259 */ 1260 static boolean_t 1261 is_pcie_fabric(dev_info_t *dip) 1262 { 1263 dev_info_t *root = ddi_root_node(); 1264 dev_info_t *pdip; 1265 boolean_t found = B_FALSE; 1266 char *bus; 1267 1268 /* 1269 * Is this pci/pcie ? 1270 */ 1271 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, 1272 DDI_PROP_DONTPASS, "device_type", &bus) != 1273 DDI_PROP_SUCCESS) { 1274 DEBUGPRT(CE_WARN, "is_pcie_fabric: cannot find " 1275 "\"device_type\" property for dip %p\n", (void *)dip); 1276 return (B_FALSE); 1277 } 1278 1279 if (strcmp(bus, "pciex") == 0) { 1280 /* pcie bus, done */ 1281 ddi_prop_free(bus); 1282 return (B_TRUE); 1283 } else if (strcmp(bus, "pci") == 0) { 1284 /* 1285 * pci bus, fall through to check if it resides in 1286 * a pcie hierarchy. 1287 */ 1288 ddi_prop_free(bus); 1289 } else { 1290 /* other bus, return failure */ 1291 ddi_prop_free(bus); 1292 return (B_FALSE); 1293 } 1294 1295 /* 1296 * Does this device reside in a pcie fabric ? 1297 */ 1298 for (pdip = ddi_get_parent(dip); pdip && (pdip != root) && 1299 !found; pdip = ddi_get_parent(pdip)) { 1300 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip, 1301 DDI_PROP_DONTPASS, "device_type", &bus) != 1302 DDI_PROP_SUCCESS) 1303 break; 1304 1305 if (strcmp(bus, "pciex") == 0) 1306 found = B_TRUE; 1307 1308 ddi_prop_free(bus); 1309 } 1310 1311 return (found); 1312 } 1313 1314 /* 1315 * Remove a piece of IO/MEM resource from "available" property of 'dip'. 1316 */ 1317 static int 1318 pci_get_available_prop(dev_info_t *dip, uint64_t base, uint64_t len, 1319 char *busra_type) 1320 { 1321 pci_regspec_t *regs, *newregs; 1322 uint_t status; 1323 int rlen, rcount; 1324 int i, j, k; 1325 uint64_t dlen; 1326 boolean_t found = B_FALSE; 1327 uint32_t type; 1328 1329 /* check if we're manipulating MEM/IO resource */ 1330 if ((type = pci_type_ra2pci(busra_type)) == PCI_ADDR_TYPE_INVAL) 1331 return (DDI_SUCCESS); 1332 1333 /* check if dip is a pci/pcie device resides in a pcie fabric */ 1334 if (!is_pcie_fabric(dip)) 1335 return (DDI_SUCCESS); 1336 1337 status = ddi_getlongprop(DDI_DEV_T_ANY, dip, 1338 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, 1339 "available", (caddr_t)®s, &rlen); 1340 1341 ASSERT(status == DDI_SUCCESS); 1342 if (status != DDI_SUCCESS) 1343 return (status); 1344 1345 /* 1346 * The updated "available" property will at most have one more entry 1347 * than existing one (when the requested range is in the middle of 1348 * the matched property entry) 1349 */ 1350 newregs = kmem_alloc(rlen + sizeof (pci_regspec_t), KM_SLEEP); 1351 1352 rcount = rlen / sizeof (pci_regspec_t); 1353 for (i = 0, j = 0; i < rcount; i++) { 1354 if (type == (regs[i].pci_phys_hi & PCI_ADDR_TYPE_MASK)) { 1355 uint64_t range_base, range_len; 1356 1357 range_base = ((uint64_t)(regs[i].pci_phys_mid) << 32) | 1358 ((uint64_t)(regs[i].pci_phys_low)); 1359 range_len = ((uint64_t)(regs[i].pci_size_hi) << 32) | 1360 ((uint64_t)(regs[i].pci_size_low)); 1361 1362 if ((base < range_base) || 1363 (base + len > range_base + range_len)) { 1364 /* 1365 * not a match, copy the entry 1366 */ 1367 goto copy_entry; 1368 } 1369 1370 /* 1371 * range_base base base+len range_base 1372 * +range_len 1373 * +------------+-----------+----------+ 1374 * | |///////////| | 1375 * +------------+-----------+----------+ 1376 */ 1377 /* 1378 * Found a match, remove the range out of this entry. 1379 */ 1380 found = B_TRUE; 1381 1382 dlen = base - range_base; 1383 if (dlen != 0) { 1384 newregs[j].pci_phys_hi = regs[i].pci_phys_hi; 1385 newregs[j].pci_phys_mid = 1386 (uint32_t)(range_base >> 32); 1387 newregs[j].pci_phys_low = 1388 (uint32_t)(range_base); 1389 newregs[j].pci_size_hi = (uint32_t)(dlen >> 32); 1390 newregs[j].pci_size_low = (uint32_t)dlen; 1391 j++; 1392 } 1393 1394 dlen = (range_base + range_len) - (base + len); 1395 if (dlen != 0) { 1396 newregs[j].pci_phys_hi = regs[i].pci_phys_hi; 1397 newregs[j].pci_phys_mid = 1398 (uint32_t)((base + len)>> 32); 1399 newregs[j].pci_phys_low = 1400 (uint32_t)(base + len); 1401 newregs[j].pci_size_hi = (uint32_t)(dlen >> 32); 1402 newregs[j].pci_size_low = (uint32_t)dlen; 1403 j++; 1404 } 1405 1406 /* 1407 * We've allocated the resource from the matched 1408 * entry, almost finished but still need to copy 1409 * the rest entries from the original property 1410 * array. 1411 */ 1412 for (k = i + 1; k < rcount; k++) { 1413 newregs[j] = regs[k]; 1414 j++; 1415 } 1416 1417 goto done; 1418 1419 } else { 1420 copy_entry: 1421 newregs[j] = regs[i]; 1422 j++; 1423 } 1424 } 1425 1426 done: 1427 /* 1428 * This should not fail so assert it. For non-debug kernel we don't 1429 * want to panic thus only logging a warning message. 1430 */ 1431 ASSERT(found == B_TRUE); 1432 if (!found) { 1433 cmn_err(CE_WARN, "pci_get_available_prop: failed to remove " 1434 "resource from dip %p : base 0x%" PRIx64 ", len 0x%" PRIX64 1435 ", type 0x%x\n", (void *)dip, base, len, type); 1436 kmem_free(newregs, rlen + sizeof (pci_regspec_t)); 1437 kmem_free(regs, rlen); 1438 1439 return (DDI_FAILURE); 1440 } 1441 1442 /* 1443 * Found the resources from parent, update the "available" 1444 * property. 1445 */ 1446 if (j == 0) { 1447 /* all the resources are consumed, remove the property */ 1448 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "available"); 1449 } else { 1450 /* 1451 * There are still resource available in the parent dip, 1452 * update with the remaining resources. 1453 */ 1454 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 1455 "available", (int *)newregs, 1456 (j * sizeof (pci_regspec_t)) / sizeof (int)); 1457 } 1458 1459 kmem_free(newregs, rlen + sizeof (pci_regspec_t)); 1460 kmem_free(regs, rlen); 1461 1462 return (DDI_SUCCESS); 1463 } 1464 1465 /* 1466 * Add a piece of IO/MEM resource to "available" property of 'dip'. 1467 */ 1468 static int 1469 pci_put_available_prop(dev_info_t *dip, uint64_t base, uint64_t len, 1470 char *busra_type) 1471 { 1472 pci_regspec_t *regs, *newregs; 1473 uint_t status; 1474 int rlen, rcount; 1475 int i, j, k; 1476 int matched = 0; 1477 uint64_t orig_base = base; 1478 uint64_t orig_len = len; 1479 uint32_t type; 1480 1481 /* check if we're manipulating MEM/IO resource */ 1482 if ((type = pci_type_ra2pci(busra_type)) == PCI_ADDR_TYPE_INVAL) 1483 return (DDI_SUCCESS); 1484 1485 /* check if dip is a pci/pcie device resides in a pcie fabric */ 1486 if (!is_pcie_fabric(dip)) 1487 return (DDI_SUCCESS); 1488 1489 status = ddi_getlongprop(DDI_DEV_T_ANY, dip, 1490 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, 1491 "available", (caddr_t)®s, &rlen); 1492 1493 switch (status) { 1494 case DDI_PROP_NOT_FOUND: 1495 goto not_found; 1496 1497 case DDI_PROP_SUCCESS: 1498 break; 1499 1500 default: 1501 return (status); 1502 } 1503 1504 /* 1505 * The "available" property exist on the node, try to put this 1506 * resource back, merge if there are adjacent resources. 1507 * 1508 * The updated "available" property will at most have one more entry 1509 * than existing one (when there is no adjacent entries thus the new 1510 * resource is appended at the end) 1511 */ 1512 newregs = kmem_alloc(rlen + sizeof (pci_regspec_t), KM_SLEEP); 1513 1514 rcount = rlen / sizeof (pci_regspec_t); 1515 for (i = 0, j = 0; i < rcount; i++) { 1516 if (type == (regs[i].pci_phys_hi & PCI_ADDR_TYPE_MASK)) { 1517 uint64_t range_base, range_len; 1518 1519 range_base = ((uint64_t)(regs[i].pci_phys_mid) << 32) | 1520 ((uint64_t)(regs[i].pci_phys_low)); 1521 range_len = ((uint64_t)(regs[i].pci_size_hi) << 32) | 1522 ((uint64_t)(regs[i].pci_size_low)); 1523 1524 if ((base + len < range_base) || 1525 (base > range_base + range_len)) { 1526 /* 1527 * Not adjacent, copy the entry and contiue 1528 */ 1529 goto copy_entry; 1530 } 1531 1532 /* 1533 * Adjacent or overlap? 1534 * 1535 * Should not have overlapping resources so assert it. 1536 * For non-debug kernel we don't want to panic thus 1537 * only logging a warning message. 1538 */ 1539 #if 0 1540 ASSERT((base + len == range_base) || 1541 (base == range_base + range_len)); 1542 #endif 1543 if ((base + len != range_base) && 1544 (base != range_base + range_len)) { 1545 cmn_err(CE_WARN, "pci_put_available_prop: " 1546 "failed to add resource to dip %p : " 1547 "base 0x%" PRIx64 ", len 0x%" PRIx64 " " 1548 "overlaps with existing resource " 1549 "base 0x%" PRIx64 ", len 0x%" PRIx64 "\n", 1550 (void *)dip, orig_base, orig_len, 1551 range_base, range_len); 1552 1553 goto failure; 1554 } 1555 1556 /* 1557 * On the left: 1558 * 1559 * base range_base 1560 * +-------------+-------------+ 1561 * |/////////////| | 1562 * +-------------+-------------+ 1563 * len range_len 1564 * 1565 * On the right: 1566 * 1567 * range_base base 1568 * +-------------+-------------+ 1569 * | |/////////////| 1570 * +-------------+-------------+ 1571 * range_len len 1572 */ 1573 /* 1574 * There are at most two piece of resources adjacent 1575 * with this resource, assert it. 1576 */ 1577 ASSERT(matched < 2); 1578 1579 if (!(matched < 2)) { 1580 cmn_err(CE_WARN, "pci_put_available_prop: " 1581 "failed to add resource to dip %p : " 1582 "base 0x%" PRIx64 ", len 0x%" PRIx64 " " 1583 "found overlaps in existing resources\n", 1584 (void *)dip, orig_base, orig_len); 1585 1586 goto failure; 1587 } 1588 1589 /* setup base & len to refer to the merged range */ 1590 len += range_len; 1591 if (base == range_base + range_len) 1592 base = range_base; 1593 1594 if (matched == 0) { 1595 /* 1596 * One adjacent entry, add this resource in 1597 */ 1598 newregs[j].pci_phys_hi = regs[i].pci_phys_hi; 1599 newregs[j].pci_phys_mid = 1600 (uint32_t)(base >> 32); 1601 newregs[j].pci_phys_low = (uint32_t)(base); 1602 newregs[j].pci_size_hi = (uint32_t)(len >> 32); 1603 newregs[j].pci_size_low = (uint32_t)len; 1604 1605 matched = 1; 1606 k = j; 1607 j++; 1608 } else { /* matched == 1 */ 1609 /* 1610 * Two adjacent entries, merge them together 1611 */ 1612 newregs[k].pci_phys_hi = regs[i].pci_phys_hi; 1613 newregs[k].pci_phys_mid = 1614 (uint32_t)(base >> 32); 1615 newregs[k].pci_phys_low = (uint32_t)(base); 1616 newregs[k].pci_size_hi = (uint32_t)(len >> 32); 1617 newregs[k].pci_size_low = (uint32_t)len; 1618 1619 matched = 2; 1620 } 1621 } else { 1622 copy_entry: 1623 newregs[j] = regs[i]; 1624 j++; 1625 } 1626 } 1627 1628 if (matched == 0) { 1629 /* No adjacent entries, append at end */ 1630 ASSERT(j == rcount); 1631 1632 /* 1633 * According to page 15 of 1275 spec, bit "n" of "available" 1634 * should be set to 1. 1635 */ 1636 newregs[j].pci_phys_hi = type; 1637 newregs[j].pci_phys_hi |= PCI_REG_REL_M; 1638 1639 newregs[j].pci_phys_mid = (uint32_t)(base >> 32); 1640 newregs[j].pci_phys_low = (uint32_t)base; 1641 newregs[j].pci_size_hi = (uint32_t)(len >> 32); 1642 newregs[j].pci_size_low = (uint32_t)len; 1643 1644 j++; 1645 } 1646 1647 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 1648 "available", (int *)newregs, 1649 (j * sizeof (pci_regspec_t)) / sizeof (int)); 1650 1651 kmem_free(newregs, rlen + sizeof (pci_regspec_t)); 1652 kmem_free(regs, rlen); 1653 return (DDI_SUCCESS); 1654 1655 not_found: 1656 /* 1657 * There is no "available" property on the parent node, create it. 1658 */ 1659 newregs = kmem_alloc(sizeof (pci_regspec_t), KM_SLEEP); 1660 1661 /* 1662 * According to page 15 of 1275 spec, bit "n" of "available" should 1663 * be set to 1. 1664 */ 1665 newregs[0].pci_phys_hi = type; 1666 newregs[0].pci_phys_hi |= PCI_REG_REL_M; 1667 1668 newregs[0].pci_phys_mid = (uint32_t)(base >> 32); 1669 newregs[0].pci_phys_low = (uint32_t)base; 1670 newregs[0].pci_size_hi = (uint32_t)(len >> 32); 1671 newregs[0].pci_size_low = (uint32_t)len; 1672 1673 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 1674 "available", (int *)newregs, 1675 sizeof (pci_regspec_t) / sizeof (int)); 1676 kmem_free(newregs, sizeof (pci_regspec_t)); 1677 return (DDI_SUCCESS); 1678 1679 failure: 1680 kmem_free(newregs, rlen + sizeof (pci_regspec_t)); 1681 kmem_free(regs, rlen); 1682 return (DDI_FAILURE); 1683 } 1684 1685 static uint32_t 1686 pci_type_ra2pci(char *type) 1687 { 1688 uint32_t pci_type = PCI_ADDR_TYPE_INVAL; 1689 1690 /* 1691 * No 64 bit mem support for now 1692 */ 1693 if (strcmp(type, NDI_RA_TYPE_IO) == 0) { 1694 pci_type = PCI_ADDR_IO; 1695 1696 } else if (strcmp(type, NDI_RA_TYPE_MEM) == 0) { 1697 pci_type = PCI_ADDR_MEM32; 1698 1699 } else if (strcmp(type, NDI_RA_TYPE_PCI_PREFETCH_MEM) == 0) { 1700 pci_type = PCI_ADDR_MEM32; 1701 pci_type |= PCI_REG_PF_M; 1702 } 1703 1704 return (pci_type); 1705 } 1706