xref: /titanic_52/usr/src/uts/common/inet/ip/ip_if.c (revision c6f76c3487b0d7e374ba5897fabad436f221c46e)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */
/* Copyright (c) 1990 Mentat Inc. */

#pragma ident	"%Z%%M%	%I%	%E% SMI"

/*
 * This file contains the interface control functions for IP.
 */

#include <sys/types.h>
#include <sys/stream.h>
#include <sys/dlpi.h>
#include <sys/stropts.h>
#include <sys/strsun.h>
#include <sys/sysmacros.h>
#include <sys/strlog.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/cmn_err.h>
#include <sys/kstat.h>
#include <sys/debug.h>
#include <sys/zone.h>

#include <sys/kmem.h>
#include <sys/systm.h>
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/isa_defs.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_types.h>
#include <net/if_dl.h>
#include <net/route.h>
#include <sys/sockio.h>
#include <netinet/in.h>
#include <netinet/ip6.h>
#include <netinet/icmp6.h>
#include <netinet/igmp_var.h>
#include <sys/strsun.h>
#include <sys/policy.h>
#include <sys/ethernet.h>

#include <inet/common.h>   /* for various inet/mi.h and inet/nd.h needs */
#include <inet/mi.h>
#include <inet/nd.h>
#include <inet/arp.h>
#include <inet/mib2.h>
#include <inet/ip.h>
#include <inet/ip6.h>
#include <inet/ip6_asp.h>
#include <inet/tcp.h>
#include <inet/ip_multi.h>
#include <inet/ip_ire.h>
#include <inet/ip_ftable.h>
#include <inet/ip_rts.h>
#include <inet/ip_ndp.h>
#include <inet/ip_if.h>
#include <inet/ip_impl.h>
#include <inet/tun.h>
#include <inet/sctp_ip.h>

#include <net/pfkeyv2.h>
#include <inet/ipsec_info.h>
#include <inet/sadb.h>
#include <inet/ipsec_impl.h>
#include <sys/iphada.h>


#include <netinet/igmp.h>
#include <inet/ip_listutils.h>
#include <inet/ipclassifier.h>
#include <sys/mac.h>

#include <sys/systeminfo.h>
#include <sys/bootconf.h>

#include <sys/tsol/tndb.h>
#include <sys/tsol/tnet.h>

/* The character which tells where the ill_name ends */
#define	IPIF_SEPARATOR_CHAR	':'

/* IP ioctl function table entry */
typedef struct ipft_s {
	int	ipft_cmd;
	pfi_t	ipft_pfi;
	int	ipft_min_size;
	int	ipft_flags;
} ipft_t;
#define	IPFT_F_NO_REPLY		0x1	/* IP ioctl does not expect any reply */
#define	IPFT_F_SELF_REPLY	0x2	/* ioctl callee does the ioctl reply */

typedef struct ip_sock_ar_s {
	union {
		area_t	ip_sock_area;
		ared_t	ip_sock_ared;
		areq_t	ip_sock_areq;
	} ip_sock_ar_u;
	queue_t	*ip_sock_ar_q;
} ip_sock_ar_t;

static int	nd_ill_forward_get(queue_t *, mblk_t *, caddr_t, cred_t *);
static int	nd_ill_forward_set(queue_t *q, mblk_t *mp,
		    char *value, caddr_t cp, cred_t *ioc_cr);

static boolean_t ip_addr_ok_v4(ipaddr_t addr, ipaddr_t subnet_mask);
static ip_m_t	*ip_m_lookup(t_uscalar_t mac_type);
static int	ip_sioctl_addr_tail(ipif_t *ipif, sin_t *sin, queue_t *q,
    mblk_t *mp, boolean_t need_up);
static int	ip_sioctl_dstaddr_tail(ipif_t *ipif, sin_t *sin, queue_t *q,
    mblk_t *mp, boolean_t need_up);
static int	ip_sioctl_slifzone_tail(ipif_t *ipif, zoneid_t zoneid,
    queue_t *q, mblk_t *mp, boolean_t need_up);
static int	ip_sioctl_flags_tail(ipif_t *ipif, uint64_t flags, queue_t *q,
    mblk_t *mp, boolean_t need_up);
static int	ip_sioctl_netmask_tail(ipif_t *ipif, sin_t *sin, queue_t *q,
    mblk_t *mp);
static int	ip_sioctl_subnet_tail(ipif_t *ipif, in6_addr_t, in6_addr_t,
    queue_t *q, mblk_t *mp, boolean_t need_up);
static int	ip_sioctl_arp_common(ill_t *ill, queue_t *q, mblk_t *mp,
    sin_t *sin, boolean_t x_arp_ioctl, boolean_t if_arp_ioctl);
static ipaddr_t	ip_subnet_mask(ipaddr_t addr, ipif_t **);
static void	ip_wput_ioctl(queue_t *q, mblk_t *mp);
static void	ipsq_flush(ill_t *ill);
static void	ipsq_clean_all(ill_t *ill);
static void	ipsq_clean_ring(ill_t *ill, ill_rx_ring_t *rx_ring);
static	int	ip_sioctl_token_tail(ipif_t *ipif, sin6_t *sin6, int addrlen,
    queue_t *q, mblk_t *mp, boolean_t need_up);
static void	ipsq_delete(ipsq_t *);

static ipif_t	*ipif_allocate(ill_t *ill, int id, uint_t ire_type,
		    boolean_t initialize);
static void	ipif_check_bcast_ires(ipif_t *test_ipif);
static void	ipif_down_delete_ire(ire_t *ire, char *ipif);
static void	ipif_delete_cache_ire(ire_t *, char *);
static int	ipif_logical_down(ipif_t *ipif, queue_t *q, mblk_t *mp);
static void	ipif_free(ipif_t *ipif);
static void	ipif_free_tail(ipif_t *ipif);
static void	ipif_mtu_change(ire_t *ire, char *ipif_arg);
static void	ipif_multicast_down(ipif_t *ipif);
static void	ipif_recreate_interface_routes(ipif_t *old_ipif, ipif_t *ipif);
static void	ipif_set_default(ipif_t *ipif);
static int	ipif_set_values(queue_t *q, mblk_t *mp,
    char *interf_name, uint_t *ppa);
static int	ipif_set_values_tail(ill_t *ill, ipif_t *ipif, mblk_t *mp,
    queue_t *q);
static ipif_t	*ipif_lookup_on_name(char *name, size_t namelen,
    boolean_t do_alloc, boolean_t *exists, boolean_t isv6, zoneid_t zoneid,
    queue_t *q, mblk_t *mp, ipsq_func_t func, int *error);
static int	ipif_up(ipif_t *ipif, queue_t *q, mblk_t *mp);
static void	ipif_update_other_ipifs(ipif_t *old_ipif, ill_group_t *illgrp);

static int	ill_alloc_ppa(ill_if_t *, ill_t *);
static int	ill_arp_off(ill_t *ill);
static int	ill_arp_on(ill_t *ill);
static void	ill_delete_interface_type(ill_if_t *);
static int	ill_dl_up(ill_t *ill, ipif_t *ipif, mblk_t *mp, queue_t *q);
static void	ill_dl_down(ill_t *ill);
static void	ill_down(ill_t *ill);
static void	ill_downi(ire_t *ire, char *ill_arg);
static void	ill_downi_mrtun_srcif(ire_t *ire, char *ill_arg);
static void	ill_down_tail(ill_t *ill);
static void	ill_free_mib(ill_t *ill);
static void	ill_glist_delete(ill_t *);
static boolean_t ill_has_usable_ipif(ill_t *);
static int	ill_lock_ipsq_ills(ipsq_t *sq, ill_t **list, int);
static void	ill_nominate_bcast_rcv(ill_group_t *illgrp);
static void	ill_phyint_free(ill_t *ill);
static void	ill_phyint_reinit(ill_t *ill);
static void	ill_set_nce_router_flags(ill_t *, boolean_t);
static void	ill_signal_ipsq_ills(ipsq_t *, boolean_t);
static boolean_t ill_split_ipsq(ipsq_t *cur_sq);
static void	ill_stq_cache_delete(ire_t *, char *);

static boolean_t ip_ether_v6intfid(uint_t, uint8_t *, in6_addr_t *);
static boolean_t ip_nodef_v6intfid(uint_t, uint8_t *, in6_addr_t *);
static boolean_t ip_ether_v6mapinfo(uint_t, uint8_t *, uint8_t *, uint32_t *,
    in6_addr_t *);
static boolean_t ip_ether_v4mapinfo(uint_t, uint8_t *, uint8_t *, uint32_t *,
    ipaddr_t *);
static boolean_t ip_ib_v6intfid(uint_t, uint8_t *, in6_addr_t *);
static boolean_t ip_ib_v6mapinfo(uint_t, uint8_t *, uint8_t *, uint32_t *,
    in6_addr_t *);
static boolean_t ip_ib_v4mapinfo(uint_t, uint8_t *, uint8_t *, uint32_t *,
    ipaddr_t *);

static void	ipif_save_ire(ipif_t *, ire_t *);
static void	ipif_remove_ire(ipif_t *, ire_t *);
static void 	ip_cgtp_bcast_add(ire_t *, ire_t *);
static void 	ip_cgtp_bcast_delete(ire_t *);

/*
 * Per-ill IPsec capabilities management.
 */
static ill_ipsec_capab_t *ill_ipsec_capab_alloc(void);
static void	ill_ipsec_capab_free(ill_ipsec_capab_t *);
static void	ill_ipsec_capab_add(ill_t *, uint_t, boolean_t);
static void	ill_ipsec_capab_delete(ill_t *, uint_t);
static boolean_t ill_ipsec_capab_resize_algparm(ill_ipsec_capab_t *, int);
static void ill_capability_proto(ill_t *, int, mblk_t *);
static void ill_capability_dispatch(ill_t *, mblk_t *, dl_capability_sub_t *,
    boolean_t);
static void ill_capability_id_ack(ill_t *, mblk_t *, dl_capability_sub_t *);
static void ill_capability_mdt_ack(ill_t *, mblk_t *, dl_capability_sub_t *);
static void ill_capability_mdt_reset(ill_t *, mblk_t **);
static void ill_capability_ipsec_ack(ill_t *, mblk_t *, dl_capability_sub_t *);
static void ill_capability_ipsec_reset(ill_t *, mblk_t **);
static void ill_capability_hcksum_ack(ill_t *, mblk_t *, dl_capability_sub_t *);
static void ill_capability_hcksum_reset(ill_t *, mblk_t **);
static void ill_capability_zerocopy_ack(ill_t *, mblk_t *,
    dl_capability_sub_t *);
static void ill_capability_zerocopy_reset(ill_t *, mblk_t **);

static void ill_capability_dls_ack(ill_t *, mblk_t *, dl_capability_sub_t *);
static mac_resource_handle_t ill_ring_add(void *, mac_resource_t *);
static void ill_capability_dls_reset(ill_t *, mblk_t **);
static void ill_capability_dls_disable(ill_t *);

static void	illgrp_cache_delete(ire_t *, char *);
static void	illgrp_delete(ill_t *ill);
static void	illgrp_reset_schednext(ill_t *ill);

static ill_t	*ill_prev_usesrc(ill_t *);
static int	ill_relink_usesrc_ills(ill_t *, ill_t *, uint_t);
static void	ill_disband_usesrc_group(ill_t *);

static void	conn_cleanup_stale_ire(conn_t *, caddr_t);

/*
 * if we go over the memory footprint limit more than once in this msec
 * interval, we'll start pruning aggressively.
 */
int ip_min_frag_prune_time = 0;

/*
 * max # of IPsec algorithms supported.  Limited to 1 byte by PF_KEY
 * and the IPsec DOI
 */
#define	MAX_IPSEC_ALGS	256

#define	BITSPERBYTE	8
#define	BITS(type)	(BITSPERBYTE * (long)sizeof (type))

#define	IPSEC_ALG_ENABLE(algs, algid) \
		((algs)[(algid) / BITS(ipsec_capab_elem_t)] |= \
		(1 << ((algid) % BITS(ipsec_capab_elem_t))))

#define	IPSEC_ALG_IS_ENABLED(algid, algs) \
		((algs)[(algid) / BITS(ipsec_capab_elem_t)] & \
		(1 << ((algid) % BITS(ipsec_capab_elem_t))))

typedef uint8_t ipsec_capab_elem_t;

/*
 * Per-algorithm parameters.  Note that at present, only encryption
 * algorithms have variable keysize (IKE does not provide a way to negotiate
 * auth algorithm keysize).
 *
 * All sizes here are in bits.
 */
typedef struct
{
	uint16_t	minkeylen;
	uint16_t	maxkeylen;
} ipsec_capab_algparm_t;

/*
 * Per-ill capabilities.
 */
struct ill_ipsec_capab_s {
	ipsec_capab_elem_t *encr_hw_algs;
	ipsec_capab_elem_t *auth_hw_algs;
	uint32_t algs_size;	/* size of _hw_algs in bytes */
	/* algorithm key lengths */
	ipsec_capab_algparm_t *encr_algparm;
	uint32_t encr_algparm_size;
	uint32_t encr_algparm_end;
};

/*
 * List of AH and ESP IPsec acceleration capable ills
 */
typedef struct ipsec_capab_ill_s {
	uint_t ill_index;
	boolean_t ill_isv6;
	struct ipsec_capab_ill_s *next;
} ipsec_capab_ill_t;

static ipsec_capab_ill_t *ipsec_capab_ills_ah;
static ipsec_capab_ill_t *ipsec_capab_ills_esp;
krwlock_t ipsec_capab_ills_lock;

/*
 * The field values are larger than strictly necessary for simple
 * AR_ENTRY_ADDs but the padding lets us accomodate the socket ioctls.
 */
static area_t	ip_area_template = {
	AR_ENTRY_ADD,			/* area_cmd */
	sizeof (ip_sock_ar_t) + (IP_ADDR_LEN*2) + sizeof (struct sockaddr_dl),
					/* area_name_offset */
	/* area_name_length temporarily holds this structure length */
	sizeof (area_t),			/* area_name_length */
	IP_ARP_PROTO_TYPE,		/* area_proto */
	sizeof (ip_sock_ar_t),		/* area_proto_addr_offset */
	IP_ADDR_LEN,			/* area_proto_addr_length */
	sizeof (ip_sock_ar_t) + IP_ADDR_LEN,
					/* area_proto_mask_offset */
	0,				/* area_flags */
	sizeof (ip_sock_ar_t) + IP_ADDR_LEN + IP_ADDR_LEN,
					/* area_hw_addr_offset */
	/* Zero length hw_addr_length means 'use your idea of the address' */
	0				/* area_hw_addr_length */
};

/*
 * AR_ENTRY_ADD/DELETE templates have been added for IPv6 external resolver
 * support
 */
static area_t	ip6_area_template = {
	AR_ENTRY_ADD,			/* area_cmd */
	sizeof (ip_sock_ar_t) + (IPV6_ADDR_LEN*2) + sizeof (sin6_t),
					/* area_name_offset */
	/* area_name_length temporarily holds this structure length */
	sizeof (area_t),			/* area_name_length */
	IP_ARP_PROTO_TYPE,		/* area_proto */
	sizeof (ip_sock_ar_t),		/* area_proto_addr_offset */
	IPV6_ADDR_LEN,			/* area_proto_addr_length */
	sizeof (ip_sock_ar_t) + IPV6_ADDR_LEN,
					/* area_proto_mask_offset */
	0,				/* area_flags */
	sizeof (ip_sock_ar_t) + IPV6_ADDR_LEN + IPV6_ADDR_LEN,
					/* area_hw_addr_offset */
	/* Zero length hw_addr_length means 'use your idea of the address' */
	0				/* area_hw_addr_length */
};

static ared_t	ip_ared_template = {
	AR_ENTRY_DELETE,
	sizeof (ared_t) + IP_ADDR_LEN,
	sizeof (ared_t),
	IP_ARP_PROTO_TYPE,
	sizeof (ared_t),
	IP_ADDR_LEN
};

static ared_t	ip6_ared_template = {
	AR_ENTRY_DELETE,
	sizeof (ared_t) + IPV6_ADDR_LEN,
	sizeof (ared_t),
	IP_ARP_PROTO_TYPE,
	sizeof (ared_t),
	IPV6_ADDR_LEN
};

/*
 * A template for an IPv6 AR_ENTRY_QUERY template has not been created, as
 * as the areq doesn't include an IP address in ill_dl_up() (the only place a
 * areq is used).
 */
static areq_t	ip_areq_template = {
	AR_ENTRY_QUERY,			/* cmd */
	sizeof (areq_t)+(2*IP_ADDR_LEN),	/* name offset */
	sizeof (areq_t),	/* name len (filled by ill_arp_alloc) */
	IP_ARP_PROTO_TYPE,		/* protocol, from arps perspective */
	sizeof (areq_t),			/* target addr offset */
	IP_ADDR_LEN,			/* target addr_length */
	0,				/* flags */
	sizeof (areq_t) + IP_ADDR_LEN,	/* sender addr offset */
	IP_ADDR_LEN,			/* sender addr length */
	6,				/* xmit_count */
	1000,				/* (re)xmit_interval in milliseconds */
	4				/* max # of requests to buffer */
	/* anything else filled in by the code */
};

static arc_t	ip_aru_template = {
	AR_INTERFACE_UP,
	sizeof (arc_t),		/* Name offset */
	sizeof (arc_t)		/* Name length (set by ill_arp_alloc) */
};

static arc_t	ip_ard_template = {
	AR_INTERFACE_DOWN,
	sizeof (arc_t),		/* Name offset */
	sizeof (arc_t)		/* Name length (set by ill_arp_alloc) */
};

static arc_t	ip_aron_template = {
	AR_INTERFACE_ON,
	sizeof (arc_t),		/* Name offset */
	sizeof (arc_t)		/* Name length (set by ill_arp_alloc) */
};

static arc_t	ip_aroff_template = {
	AR_INTERFACE_OFF,
	sizeof (arc_t),		/* Name offset */
	sizeof (arc_t)		/* Name length (set by ill_arp_alloc) */
};


static arma_t	ip_arma_multi_template = {
	AR_MAPPING_ADD,
	sizeof (arma_t) + 3*IP_ADDR_LEN + IP_MAX_HW_LEN,
				/* Name offset */
	sizeof (arma_t),	/* Name length (set by ill_arp_alloc) */
	IP_ARP_PROTO_TYPE,
	sizeof (arma_t),			/* proto_addr_offset */
	IP_ADDR_LEN,				/* proto_addr_length */
	sizeof (arma_t) + IP_ADDR_LEN,		/* proto_mask_offset */
	sizeof (arma_t) + 2*IP_ADDR_LEN,	/* proto_extract_mask_offset */
	ACE_F_PERMANENT | ACE_F_MAPPING,	/* flags */
	sizeof (arma_t) + 3*IP_ADDR_LEN,	/* hw_addr_offset */
	IP_MAX_HW_LEN,				/* hw_addr_length */
	0,					/* hw_mapping_start */
};

static ipft_t	ip_ioctl_ftbl[] = {
	{ IP_IOC_IRE_DELETE, ip_ire_delete, sizeof (ipid_t), 0 },
	{ IP_IOC_IRE_DELETE_NO_REPLY, ip_ire_delete, sizeof (ipid_t),
		IPFT_F_NO_REPLY },
	{ IP_IOC_IRE_ADVISE_NO_REPLY, ip_ire_advise, sizeof (ipic_t),
		IPFT_F_NO_REPLY },
	{ IP_IOC_RTS_REQUEST, ip_rts_request, 0, IPFT_F_SELF_REPLY },
	{ 0 }
};

/* Simple ICMP IP Header Template */
static ipha_t icmp_ipha = {
	IP_SIMPLE_HDR_VERSION, 0, 0, 0, 0, 0, IPPROTO_ICMP
};

/* Flag descriptors for ip_ipif_report */
static nv_t	ipif_nv_tbl[] = {
	{ IPIF_UP,		"UP" },
	{ IPIF_BROADCAST,	"BROADCAST" },
	{ ILLF_DEBUG,		"DEBUG" },
	{ PHYI_LOOPBACK,	"LOOPBACK" },
	{ IPIF_POINTOPOINT,	"POINTOPOINT" },
	{ ILLF_NOTRAILERS,	"NOTRAILERS" },
	{ PHYI_RUNNING,		"RUNNING" },
	{ ILLF_NOARP,		"NOARP" },
	{ PHYI_PROMISC,		"PROMISC" },
	{ PHYI_ALLMULTI,	"ALLMULTI" },
	{ PHYI_INTELLIGENT,	"INTELLIGENT" },
	{ ILLF_MULTICAST,	"MULTICAST" },
	{ PHYI_MULTI_BCAST,	"MULTI_BCAST" },
	{ IPIF_UNNUMBERED,	"UNNUMBERED" },
	{ IPIF_DHCPRUNNING,	"DHCP" },
	{ IPIF_PRIVATE,		"PRIVATE" },
	{ IPIF_NOXMIT,		"NOXMIT" },
	{ IPIF_NOLOCAL,		"NOLOCAL" },
	{ IPIF_DEPRECATED,	"DEPRECATED" },
	{ IPIF_PREFERRED,	"PREFERRED" },
	{ IPIF_TEMPORARY,	"TEMPORARY" },
	{ IPIF_ADDRCONF,	"ADDRCONF" },
	{ PHYI_VIRTUAL,		"VIRTUAL" },
	{ ILLF_ROUTER,		"ROUTER" },
	{ ILLF_NONUD,		"NONUD" },
	{ IPIF_ANYCAST,		"ANYCAST" },
	{ ILLF_NORTEXCH,	"NORTEXCH" },
	{ ILLF_IPV4,		"IPV4" },
	{ ILLF_IPV6,		"IPV6" },
	{ IPIF_MIPRUNNING,	"MIP" },
	{ IPIF_NOFAILOVER,	"NOFAILOVER" },
	{ PHYI_FAILED,		"FAILED" },
	{ PHYI_STANDBY,		"STANDBY" },
	{ PHYI_INACTIVE,	"INACTIVE" },
	{ PHYI_OFFLINE,		"OFFLINE" },
};

static uchar_t	ip_six_byte_all_ones[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };

static ip_m_t	ip_m_tbl[] = {
	{ DL_ETHER, IFT_ETHER, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_ether_v6intfid },
	{ DL_CSMACD, IFT_ISO88023, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_nodef_v6intfid },
	{ DL_TPB, IFT_ISO88024, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_nodef_v6intfid },
	{ DL_TPR, IFT_ISO88025, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_nodef_v6intfid },
	{ DL_FDDI, IFT_FDDI, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_ether_v6intfid },
	{ DL_IB, IFT_IB, ip_ib_v4mapinfo, ip_ib_v6mapinfo,
	    ip_ib_v6intfid },
	{ SUNW_DL_VNI, IFT_OTHER, NULL, NULL, NULL},
	{ DL_OTHER, IFT_OTHER, ip_ether_v4mapinfo, ip_ether_v6mapinfo,
	    ip_nodef_v6intfid }
};

static ill_t	ill_null;		/* Empty ILL for init. */
char	ipif_loopback_name[] = "lo0";
static char *ipv4_forward_suffix = ":ip_forwarding";
static char *ipv6_forward_suffix = ":ip6_forwarding";
static kstat_t *loopback_ksp = NULL;
static	sin6_t	sin6_null;	/* Zero address for quick clears */
static	sin_t	sin_null;	/* Zero address for quick clears */
static	uint_t	ill_index = 1;	/* Used to assign interface indicies */
/* When set search for unused index */
static boolean_t ill_index_wrap = B_FALSE;
/* When set search for unused ipif_seqid */
static ipif_t	ipif_zero;
uint_t	ipif_src_random;

/*
 * For details on the protection offered by these locks please refer
 * to the notes under the Synchronization section at the start of ip.c
 */
krwlock_t	ill_g_lock;		/* The global ill_g_lock */
kmutex_t	ip_addr_avail_lock;	/* Address availability check lock */
ipsq_t		*ipsq_g_head;		/* List of all ipsq's on the system */

krwlock_t	ill_g_usesrc_lock;	/* Protects usesrc related fields */

/*
 * illgrp_head/ifgrp_head is protected by IP's perimeter.
 */
static  ill_group_t *illgrp_head_v4;	/* Head of IPv4 ill groups */
ill_group_t *illgrp_head_v6;		/* Head of IPv6 ill groups */

ill_g_head_t	ill_g_heads[MAX_G_HEADS];   /* ILL List Head */

/*
 * ppa arena is created after these many
 * interfaces have been plumbed.
 */
uint_t	ill_no_arena = 12;

#pragma align CACHE_ALIGN_SIZE(phyint_g_list)
static phyint_list_t phyint_g_list;	/* start of phyint list */

/*
 * Reflects value of FAILBACK variable in IPMP config file
 * /etc/default/mpathd. Default value is B_TRUE.
 * Set to B_FALSE if user disabled failback by configuring "FAILBACK=no"
 * in.mpathd uses SIOCSIPMPFAILBACK ioctl to pass this information to kernel.
 */
static boolean_t ipmp_enable_failback = B_TRUE;

/*
 * Enable soft rings if ip_squeue_soft_ring or ip_squeue_fanout
 * is set and ip_soft_rings_cnt > 0. ip_squeue_soft_ring is
 * set through platform specific code (Niagara/Ontario).
 */
#define	SOFT_RINGS_ENABLED()	(ip_soft_rings_cnt ? \
		(ip_squeue_soft_ring || ip_squeue_fanout) : B_FALSE)

#define	ILL_CAPAB_DLS	(ILL_CAPAB_SOFT_RING | ILL_CAPAB_POLL)

static uint_t
ipif_rand(void)
{
	ipif_src_random = ipif_src_random * 1103515245 + 12345;
	return ((ipif_src_random >> 16) & 0x7fff);
}

/*
 * Allocate per-interface mibs. Only used for ipv6.
 * Returns true if ok. False otherwise.
 *  ipsq  may not yet be allocated (loopback case ).
 */
static boolean_t
ill_allocate_mibs(ill_t *ill)
{
	ASSERT(ill->ill_isv6);

	/* Already allocated? */
	if (ill->ill_ip6_mib != NULL) {
		ASSERT(ill->ill_icmp6_mib != NULL);
		return (B_TRUE);
	}

	ill->ill_ip6_mib = kmem_zalloc(sizeof (*ill->ill_ip6_mib),
	    KM_NOSLEEP);
	if (ill->ill_ip6_mib == NULL) {
		return (B_FALSE);
	}
	ill->ill_icmp6_mib = kmem_zalloc(sizeof (*ill->ill_icmp6_mib),
	    KM_NOSLEEP);
	if (ill->ill_icmp6_mib == NULL) {
		kmem_free(ill->ill_ip6_mib, sizeof (*ill->ill_ip6_mib));
		ill->ill_ip6_mib = NULL;
		return (B_FALSE);
	}
	/*
	 * The ipv6Ifindex and ipv6IfIcmpIndex will be assigned later
	 * after the phyint merge occurs in ipif_set_values -> ill_glist_insert
	 * -> ill_phyint_reinit
	 */
	return (B_TRUE);
}

/*
 * Common code for preparation of ARP commands.  Two points to remember:
 * 	1) The ill_name is tacked on at the end of the allocated space so
 *	   the templates name_offset field must contain the total space
 *	   to allocate less the name length.
 *
 *	2) The templates name_length field should contain the *template*
 *	   length.  We use it as a parameter to bcopy() and then write
 *	   the real ill_name_length into the name_length field of the copy.
 * (Always called as writer.)
 */
mblk_t *
ill_arp_alloc(ill_t *ill, uchar_t *template, caddr_t addr)
{
	arc_t	*arc = (arc_t *)template;
	char	*cp;
	int	len;
	mblk_t	*mp;
	uint_t	name_length = ill->ill_name_length;
	uint_t	template_len = arc->arc_name_length;

	len = arc->arc_name_offset + name_length;
	mp = allocb(len, BPRI_HI);
	if (mp == NULL)
		return (NULL);
	cp = (char *)mp->b_rptr;
	mp->b_wptr = (uchar_t *)&cp[len];
	if (template_len)
		bcopy(template, cp, template_len);
	if (len > template_len)
		bzero(&cp[template_len], len - template_len);
	mp->b_datap->db_type = M_PROTO;

	arc = (arc_t *)cp;
	arc->arc_name_length = name_length;
	cp = (char *)arc + arc->arc_name_offset;
	bcopy(ill->ill_name, cp, name_length);

	if (addr) {
		area_t	*area = (area_t *)mp->b_rptr;

		cp = (char *)area + area->area_proto_addr_offset;
		bcopy(addr, cp, area->area_proto_addr_length);
		if (area->area_cmd == AR_ENTRY_ADD) {
			cp = (char *)area;
			len = area->area_proto_addr_length;
			if (area->area_proto_mask_offset)
				cp += area->area_proto_mask_offset;
			else
				cp += area->area_proto_addr_offset + len;
			while (len-- > 0)
				*cp++ = (char)~0;
		}
	}
	return (mp);
}

mblk_t *
ipif_area_alloc(ipif_t *ipif)
{
	return (ill_arp_alloc(ipif->ipif_ill, (uchar_t *)&ip_area_template,
	    (char *)&ipif->ipif_lcl_addr));
}

mblk_t *
ipif_ared_alloc(ipif_t *ipif)
{
	return (ill_arp_alloc(ipif->ipif_ill, (uchar_t *)&ip_ared_template,
	    (char *)&ipif->ipif_lcl_addr));
}

/*
 * Completely vaporize a lower level tap and all associated interfaces.
 * ill_delete is called only out of ip_close when the device control
 * stream is being closed.
 */
void
ill_delete(ill_t *ill)
{
	ipif_t	*ipif;
	ill_t	*prev_ill;

	/*
	 * ill_delete may be forcibly entering the ipsq. The previous
	 * ioctl may not have completed and may need to be aborted.
	 * ipsq_flush takes care of it. If we don't need to enter the
	 * the ipsq forcibly, the 2nd invocation of ipsq_flush in
	 * ill_delete_tail is sufficient.
	 */
	ipsq_flush(ill);

	/*
	 * Nuke all interfaces.  ipif_free will take down the interface,
	 * remove it from the list, and free the data structure.
	 * Walk down the ipif list and remove the logical interfaces
	 * first before removing the main ipif. We can't unplumb
	 * zeroth interface first in the case of IPv6 as reset_conn_ill
	 * -> ip_ll_delmulti_v6 de-references ill_ipif for checking
	 * POINTOPOINT.
	 *
	 * If ill_ipif was not properly initialized (i.e low on memory),
	 * then no interfaces to clean up. In this case just clean up the
	 * ill.
	 */
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next)
		ipif_free(ipif);

	/*
	 * Used only by ill_arp_on and ill_arp_off, which are writers.
	 * So nobody can be using this mp now. Free the mp allocated for
	 * honoring ILLF_NOARP
	 */
	freemsg(ill->ill_arp_on_mp);
	ill->ill_arp_on_mp = NULL;

	/* Clean up msgs on pending upcalls for mrouted */
	reset_mrt_ill(ill);

	/*
	 * ipif_free -> reset_conn_ipif will remove all multicast
	 * references for IPv4. For IPv6, we need to do it here as
	 * it points only at ills.
	 */
	reset_conn_ill(ill);

	/*
	 * ill_down will arrange to blow off any IRE's dependent on this
	 * ILL, and shut down fragmentation reassembly.
	 */
	ill_down(ill);

	/* Let SCTP know, so that it can remove this from its list. */
	sctp_update_ill(ill, SCTP_ILL_REMOVE);

	/*
	 * If an address on this ILL is being used as a source address then
	 * clear out the pointers in other ILLs that point to this ILL.
	 */
	rw_enter(&ill_g_usesrc_lock, RW_WRITER);
	if (ill->ill_usesrc_grp_next != NULL) {
		if (ill->ill_usesrc_ifindex == 0) { /* usesrc ILL ? */
			ill_disband_usesrc_group(ill);
		} else {	/* consumer of the usesrc ILL */
			prev_ill = ill_prev_usesrc(ill);
			prev_ill->ill_usesrc_grp_next =
			    ill->ill_usesrc_grp_next;
		}
	}
	rw_exit(&ill_g_usesrc_lock);
}

static void
ipif_non_duplicate(ipif_t *ipif)
{
	ill_t *ill = ipif->ipif_ill;
	mutex_enter(&ill->ill_lock);
	if (ipif->ipif_flags & IPIF_DUPLICATE) {
		ipif->ipif_flags &= ~IPIF_DUPLICATE;
		ASSERT(ill->ill_ipif_dup_count > 0);
		ill->ill_ipif_dup_count--;
	}
	mutex_exit(&ill->ill_lock);
}

/*
 * ill_delete_tail is called from ip_modclose after all references
 * to the closing ill are gone. The wait is done in ip_modclose
 */
void
ill_delete_tail(ill_t *ill)
{
	mblk_t	**mpp;
	ipif_t	*ipif;

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		ipif_non_duplicate(ipif);
		ipif_down_tail(ipif);
	}

	ASSERT(ill->ill_ipif_dup_count == 0 &&
	    ill->ill_arp_down_mp == NULL &&
	    ill->ill_arp_del_mapping_mp == NULL);

	/*
	 * If polling capability is enabled (which signifies direct
	 * upcall into IP and driver has ill saved as a handle),
	 * we need to make sure that unbind has completed before we
	 * let the ill disappear and driver no longer has any reference
	 * to this ill.
	 */
	mutex_enter(&ill->ill_lock);
	while (ill->ill_state_flags & ILL_DL_UNBIND_IN_PROGRESS)
		cv_wait(&ill->ill_cv, &ill->ill_lock);
	mutex_exit(&ill->ill_lock);

	/*
	 * Clean up polling and soft ring capabilities
	 */
	if (ill->ill_capabilities & (ILL_CAPAB_POLL|ILL_CAPAB_SOFT_RING))
		ill_capability_dls_disable(ill);

	/*
	 * Send the detach if there's one to send (i.e., if we're above a
	 * style 2 DLPI driver).
	 */
	if (ill->ill_detach_mp != NULL) {
		ill_dlpi_send(ill, ill->ill_detach_mp);
		ill->ill_detach_mp = NULL;
	}

	if (ill->ill_net_type != IRE_LOOPBACK)
		qprocsoff(ill->ill_rq);

	/*
	 * We do an ipsq_flush once again now. New messages could have
	 * landed up from below (M_ERROR or M_HANGUP). Similarly ioctls
	 * could also have landed up if an ioctl thread had looked up
	 * the ill before we set the ILL_CONDEMNED flag, but not yet
	 * enqueued the ioctl when we did the ipsq_flush last time.
	 */
	ipsq_flush(ill);

	/*
	 * Free capabilities.
	 */
	if (ill->ill_ipsec_capab_ah != NULL) {
		ill_ipsec_capab_delete(ill, DL_CAPAB_IPSEC_AH);
		ill_ipsec_capab_free(ill->ill_ipsec_capab_ah);
		ill->ill_ipsec_capab_ah = NULL;
	}

	if (ill->ill_ipsec_capab_esp != NULL) {
		ill_ipsec_capab_delete(ill, DL_CAPAB_IPSEC_ESP);
		ill_ipsec_capab_free(ill->ill_ipsec_capab_esp);
		ill->ill_ipsec_capab_esp = NULL;
	}

	if (ill->ill_mdt_capab != NULL) {
		kmem_free(ill->ill_mdt_capab, sizeof (ill_mdt_capab_t));
		ill->ill_mdt_capab = NULL;
	}

	if (ill->ill_hcksum_capab != NULL) {
		kmem_free(ill->ill_hcksum_capab, sizeof (ill_hcksum_capab_t));
		ill->ill_hcksum_capab = NULL;
	}

	if (ill->ill_zerocopy_capab != NULL) {
		kmem_free(ill->ill_zerocopy_capab,
		    sizeof (ill_zerocopy_capab_t));
		ill->ill_zerocopy_capab = NULL;
	}

	if (ill->ill_dls_capab != NULL) {
		CONN_DEC_REF(ill->ill_dls_capab->ill_unbind_conn);
		ill->ill_dls_capab->ill_unbind_conn = NULL;
		kmem_free(ill->ill_dls_capab,
		    sizeof (ill_dls_capab_t) +
		    (sizeof (ill_rx_ring_t) * ILL_MAX_RINGS));
		ill->ill_dls_capab = NULL;
	}

	ASSERT(!(ill->ill_capabilities & ILL_CAPAB_POLL));

	while (ill->ill_ipif != NULL)
		ipif_free_tail(ill->ill_ipif);

	ill_down_tail(ill);

	/*
	 * We have removed all references to ilm from conn and the ones joined
	 * within the kernel.
	 *
	 * We don't walk conns, mrts and ires because
	 *
	 * 1) reset_conn_ill and reset_mrt_ill cleans up conns and mrts.
	 * 2) ill_down ->ill_downi walks all the ires and cleans up
	 *    ill references.
	 */
	ASSERT(ilm_walk_ill(ill) == 0);
	/*
	 * Take us out of the list of ILLs. ill_glist_delete -> ill_phyint_free
	 * could free the phyint. No more reference to the phyint after this
	 * point.
	 */
	(void) ill_glist_delete(ill);

	rw_enter(&ip_g_nd_lock, RW_WRITER);
	if (ill->ill_ndd_name != NULL)
		nd_unload(&ip_g_nd, ill->ill_ndd_name);
	rw_exit(&ip_g_nd_lock);


	if (ill->ill_frag_ptr != NULL) {
		uint_t count;

		for (count = 0; count < ILL_FRAG_HASH_TBL_COUNT; count++) {
			mutex_destroy(&ill->ill_frag_hash_tbl[count].ipfb_lock);
		}
		mi_free(ill->ill_frag_ptr);
		ill->ill_frag_ptr = NULL;
		ill->ill_frag_hash_tbl = NULL;
	}
	if (ill->ill_nd_lla_mp != NULL)
		freemsg(ill->ill_nd_lla_mp);
	/* Free all retained control messages. */
	mpp = &ill->ill_first_mp_to_free;
	do {
		while (mpp[0]) {
			mblk_t  *mp;
			mblk_t  *mp1;

			mp = mpp[0];
			mpp[0] = mp->b_next;
			for (mp1 = mp; mp1 != NULL; mp1 = mp1->b_cont) {
				mp1->b_next = NULL;
				mp1->b_prev = NULL;
			}
			freemsg(mp);
		}
	} while (mpp++ != &ill->ill_last_mp_to_free);

	ill_free_mib(ill);
	ILL_TRACE_CLEANUP(ill);
}

static void
ill_free_mib(ill_t *ill)
{
	if (ill->ill_ip6_mib != NULL) {
		kmem_free(ill->ill_ip6_mib, sizeof (*ill->ill_ip6_mib));
		ill->ill_ip6_mib = NULL;
	}
	if (ill->ill_icmp6_mib != NULL) {
		kmem_free(ill->ill_icmp6_mib, sizeof (*ill->ill_icmp6_mib));
		ill->ill_icmp6_mib = NULL;
	}
}

/*
 * Concatenate together a physical address and a sap.
 *
 * Sap_lengths are interpreted as follows:
 *   sap_length == 0	==>	no sap
 *   sap_length > 0	==>	sap is at the head of the dlpi address
 *   sap_length < 0	==>	sap is at the tail of the dlpi address
 */
static void
ill_dlur_copy_address(uchar_t *phys_src, uint_t phys_length,
    t_scalar_t sap_src, t_scalar_t sap_length, uchar_t *dst)
{
	uint16_t sap_addr = (uint16_t)sap_src;

	if (sap_length == 0) {
		if (phys_src == NULL)
			bzero(dst, phys_length);
		else
			bcopy(phys_src, dst, phys_length);
	} else if (sap_length < 0) {
		if (phys_src == NULL)
			bzero(dst, phys_length);
		else
			bcopy(phys_src, dst, phys_length);
		bcopy(&sap_addr, (char *)dst + phys_length, sizeof (sap_addr));
	} else {
		bcopy(&sap_addr, dst, sizeof (sap_addr));
		if (phys_src == NULL)
			bzero((char *)dst + sap_length, phys_length);
		else
			bcopy(phys_src, (char *)dst + sap_length, phys_length);
	}
}

/*
 * Generate a dl_unitdata_req mblk for the device and address given.
 * addr_length is the length of the physical portion of the address.
 * If addr is NULL include an all zero address of the specified length.
 * TRUE? In any case, addr_length is taken to be the entire length of the
 * dlpi address, including the absolute value of sap_length.
 */
mblk_t *
ill_dlur_gen(uchar_t *addr, uint_t addr_length, t_uscalar_t sap,
		t_scalar_t sap_length)
{
	dl_unitdata_req_t *dlur;
	mblk_t	*mp;
	t_scalar_t	abs_sap_length;		/* absolute value */

	abs_sap_length = ABS(sap_length);
	mp = ip_dlpi_alloc(sizeof (*dlur) + addr_length + abs_sap_length,
		DL_UNITDATA_REQ);
	if (mp == NULL)
		return (NULL);
	dlur = (dl_unitdata_req_t *)mp->b_rptr;
	/* HACK: accomodate incompatible DLPI drivers */
	if (addr_length == 8)
		addr_length = 6;
	dlur->dl_dest_addr_length = addr_length + abs_sap_length;
	dlur->dl_dest_addr_offset = sizeof (*dlur);
	dlur->dl_priority.dl_min = 0;
	dlur->dl_priority.dl_max = 0;
	ill_dlur_copy_address(addr, addr_length, sap, sap_length,
	    (uchar_t *)&dlur[1]);
	return (mp);
}

/*
 * Add the 'mp' to the list of pending mp's headed by ill_pending_mp
 * Return an error if we already have 1 or more ioctls in progress.
 * This is used only for non-exclusive ioctls. Currently this is used
 * for SIOC*ARP and SIOCGTUNPARAM ioctls. Most set ioctls are exclusive
 * and thus need to use ipsq_pending_mp_add.
 */
boolean_t
ill_pending_mp_add(ill_t *ill, conn_t *connp, mblk_t *add_mp)
{
	ASSERT(MUTEX_HELD(&ill->ill_lock));
	ASSERT((add_mp->b_next == NULL) && (add_mp->b_prev == NULL));
	/*
	 * M_IOCDATA from ioctls, M_IOCTL from tunnel ioctls.
	 */
	ASSERT((add_mp->b_datap->db_type == M_IOCDATA) ||
	    (add_mp->b_datap->db_type == M_IOCTL));

	ASSERT(MUTEX_HELD(&connp->conn_lock));
	/*
	 * Return error if the conn has started closing. The conn
	 * could have finished cleaning up the pending mp list,
	 * If so we should not add another mp to the list negating
	 * the cleanup.
	 */
	if (connp->conn_state_flags & CONN_CLOSING)
		return (B_FALSE);
	/*
	 * Add the pending mp to the head of the list, chained by b_next.
	 * Note down the conn on which the ioctl request came, in b_prev.
	 * This will be used to later get the conn, when we get a response
	 * on the ill queue, from some other module (typically arp)
	 */
	add_mp->b_next = (void *)ill->ill_pending_mp;
	add_mp->b_queue = CONNP_TO_WQ(connp);
	ill->ill_pending_mp = add_mp;
	if (connp != NULL)
		connp->conn_oper_pending_ill = ill;
	return (B_TRUE);
}

/*
 * Retrieve the ill_pending_mp and return it. We have to walk the list
 * of mblks starting at ill_pending_mp, and match based on the ioc_id.
 */
mblk_t *
ill_pending_mp_get(ill_t *ill, conn_t **connpp, uint_t ioc_id)
{
	mblk_t	*prev = NULL;
	mblk_t	*curr = NULL;
	uint_t	id;
	conn_t	*connp;

	/*
	 * When the conn closes, conn_ioctl_cleanup needs to clean
	 * up the pending mp, but it does not know the ioc_id and
	 * passes in a zero for it.
	 */
	mutex_enter(&ill->ill_lock);
	if (ioc_id != 0)
		*connpp = NULL;

	/* Search the list for the appropriate ioctl based on ioc_id */
	for (prev = NULL, curr = ill->ill_pending_mp; curr != NULL;
	    prev = curr, curr = curr->b_next) {
		id = ((struct iocblk *)curr->b_rptr)->ioc_id;
		connp = Q_TO_CONN(curr->b_queue);
		/* Match based on the ioc_id or based on the conn */
		if ((id == ioc_id) || (ioc_id == 0 && connp == *connpp))
			break;
	}

	if (curr != NULL) {
		/* Unlink the mblk from the pending mp list */
		if (prev != NULL) {
			prev->b_next = curr->b_next;
		} else {
			ASSERT(ill->ill_pending_mp == curr);
			ill->ill_pending_mp = curr->b_next;
		}

		/*
		 * conn refcnt must have been bumped up at the start of
		 * the ioctl. So we can safely access the conn.
		 */
		ASSERT(CONN_Q(curr->b_queue));
		*connpp = Q_TO_CONN(curr->b_queue);
		curr->b_next = NULL;
		curr->b_queue = NULL;
	}

	mutex_exit(&ill->ill_lock);

	return (curr);
}

/*
 * Add the pending mp to the list. There can be only 1 pending mp
 * in the list. Any exclusive ioctl that needs to wait for a response
 * from another module or driver needs to use this function to set
 * the ipsq_pending_mp to the ioctl mblk and wait for the response from
 * the other module/driver. This is also used while waiting for the
 * ipif/ill/ire refcnts to drop to zero in bringing down an ipif.
 */
boolean_t
ipsq_pending_mp_add(conn_t *connp, ipif_t *ipif, queue_t *q, mblk_t *add_mp,
    int waitfor)
{
	ipsq_t	*ipsq;

	ASSERT(IAM_WRITER_IPIF(ipif));
	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));
	ASSERT((add_mp->b_next == NULL) && (add_mp->b_prev == NULL));
	/*
	 * M_IOCDATA from ioctls, M_IOCTL from tunnel ioctls,
	 * M_ERROR/M_HANGUP from driver
	 */
	ASSERT((DB_TYPE(add_mp) == M_IOCDATA) || (DB_TYPE(add_mp) == M_IOCTL) ||
	    (DB_TYPE(add_mp) == M_ERROR) || (DB_TYPE(add_mp) == M_HANGUP));

	ipsq = ipif->ipif_ill->ill_phyint->phyint_ipsq;
	if (connp != NULL) {
		ASSERT(MUTEX_HELD(&connp->conn_lock));
		/*
		 * Return error if the conn has started closing. The conn
		 * could have finished cleaning up the pending mp list,
		 * If so we should not add another mp to the list negating
		 * the cleanup.
		 */
		if (connp->conn_state_flags & CONN_CLOSING)
			return (B_FALSE);
	}
	mutex_enter(&ipsq->ipsq_lock);
	ipsq->ipsq_pending_ipif = ipif;
	/*
	 * Note down the queue in b_queue. This will be returned by
	 * ipsq_pending_mp_get. Caller will then use these values to restart
	 * the processing
	 */
	add_mp->b_next = NULL;
	add_mp->b_queue = q;
	ipsq->ipsq_pending_mp = add_mp;
	ipsq->ipsq_waitfor = waitfor;
	/*
	 * ipsq_current_ipif is needed to restart the operation from
	 * ipif_ill_refrele_tail when the last reference to the ipi/ill
	 * is gone. Since this is not an ioctl ipsq_current_ipif has not
	 * been set until now.
	 */
	if (DB_TYPE(add_mp) == M_ERROR || DB_TYPE(add_mp) == M_HANGUP) {
		ASSERT(ipsq->ipsq_current_ipif == NULL);
		ipsq->ipsq_current_ipif = ipif;
		ipsq->ipsq_last_cmd = DB_TYPE(add_mp);
	}
	if (connp != NULL)
		connp->conn_oper_pending_ill = ipif->ipif_ill;
	mutex_exit(&ipsq->ipsq_lock);
	return (B_TRUE);
}

/*
 * Retrieve the ipsq_pending_mp and return it. There can be only 1 mp
 * queued in the list.
 */
mblk_t *
ipsq_pending_mp_get(ipsq_t *ipsq, conn_t **connpp)
{
	mblk_t	*curr = NULL;

	mutex_enter(&ipsq->ipsq_lock);
	*connpp = NULL;
	if (ipsq->ipsq_pending_mp == NULL) {
		mutex_exit(&ipsq->ipsq_lock);
		return (NULL);
	}

	/* There can be only 1 such excl message */
	curr = ipsq->ipsq_pending_mp;
	ASSERT(curr != NULL && curr->b_next == NULL);
	ipsq->ipsq_pending_ipif = NULL;
	ipsq->ipsq_pending_mp = NULL;
	ipsq->ipsq_waitfor = 0;
	mutex_exit(&ipsq->ipsq_lock);

	if (CONN_Q(curr->b_queue)) {
		/*
		 * This mp did a refhold on the conn, at the start of the ioctl.
		 * So we can safely return a pointer to the conn to the caller.
		 */
		*connpp = Q_TO_CONN(curr->b_queue);
	} else {
		*connpp = NULL;
	}
	curr->b_next = NULL;
	curr->b_prev = NULL;
	return (curr);
}

/*
 * Cleanup the ioctl mp queued in ipsq_pending_mp
 * - Called in the ill_delete path
 * - Called in the M_ERROR or M_HANGUP path on the ill.
 * - Called in the conn close path.
 */
boolean_t
ipsq_pending_mp_cleanup(ill_t *ill, conn_t *connp)
{
	mblk_t	*mp;
	ipsq_t	*ipsq;
	queue_t	*q;
	ipif_t	*ipif;

	ASSERT(IAM_WRITER_ILL(ill));
	ipsq = ill->ill_phyint->phyint_ipsq;
	mutex_enter(&ipsq->ipsq_lock);
	/*
	 * If connp is null, unconditionally clean up the ipsq_pending_mp.
	 * This happens in M_ERROR/M_HANGUP. We need to abort the current ioctl
	 * even if it is meant for another ill, since we have to enqueue
	 * a new mp now in ipsq_pending_mp to complete the ipif_down.
	 * If connp is non-null we are called from the conn close path.
	 */
	mp = ipsq->ipsq_pending_mp;
	if (mp == NULL || (connp != NULL &&
	    mp->b_queue != CONNP_TO_WQ(connp))) {
		mutex_exit(&ipsq->ipsq_lock);
		return (B_FALSE);
	}
	/* Now remove from the ipsq_pending_mp */
	ipsq->ipsq_pending_mp = NULL;
	q = mp->b_queue;
	mp->b_next = NULL;
	mp->b_prev = NULL;
	mp->b_queue = NULL;

	/* If MOVE was in progress, clear the move_in_progress fields also. */
	ill = ipsq->ipsq_pending_ipif->ipif_ill;
	if (ill->ill_move_in_progress) {
		ILL_CLEAR_MOVE(ill);
	} else if (ill->ill_up_ipifs) {
		ill_group_cleanup(ill);
	}

	ipif = ipsq->ipsq_pending_ipif;
	ipsq->ipsq_pending_ipif = NULL;
	ipsq->ipsq_waitfor = 0;
	ipsq->ipsq_current_ipif = NULL;
	mutex_exit(&ipsq->ipsq_lock);

	if (DB_TYPE(mp) == M_IOCTL || DB_TYPE(mp) == M_IOCDATA) {
		ip_ioctl_finish(q, mp, ENXIO, connp != NULL ? CONN_CLOSE :
		    NO_COPYOUT, connp != NULL ? ipif : NULL, NULL);
	} else {
		/*
		 * IP-MT XXX In the case of TLI/XTI bind / optmgmt this can't
		 * be just inet_freemsg. we have to restart it
		 * otherwise the thread will be stuck.
		 */
		inet_freemsg(mp);
	}
	return (B_TRUE);
}

/*
 * The ill is closing. Cleanup all the pending mps. Called exclusively
 * towards the end of ill_delete. The refcount has gone to 0. So nobody
 * knows this ill, and hence nobody can add an mp to this list
 */
static void
ill_pending_mp_cleanup(ill_t *ill)
{
	mblk_t	*mp;
	queue_t	*q;

	ASSERT(IAM_WRITER_ILL(ill));

	mutex_enter(&ill->ill_lock);
	/*
	 * Every mp on the pending mp list originating from an ioctl
	 * added 1 to the conn refcnt, at the start of the ioctl.
	 * So bump it down now.  See comments in ip_wput_nondata()
	 */
	while (ill->ill_pending_mp != NULL) {
		mp = ill->ill_pending_mp;
		ill->ill_pending_mp = mp->b_next;
		mutex_exit(&ill->ill_lock);

		q = mp->b_queue;
		ASSERT(CONN_Q(q));
		mp->b_next = NULL;
		mp->b_prev = NULL;
		mp->b_queue = NULL;
		ip_ioctl_finish(q, mp, ENXIO, NO_COPYOUT, NULL, NULL);
		mutex_enter(&ill->ill_lock);
	}
	ill->ill_pending_ipif = NULL;

	mutex_exit(&ill->ill_lock);
}

/*
 * Called in the conn close path and ill delete path
 */
static void
ipsq_xopq_mp_cleanup(ill_t *ill, conn_t *connp)
{
	ipsq_t	*ipsq;
	mblk_t	*prev;
	mblk_t	*curr;
	mblk_t	*next;
	queue_t	*q;
	mblk_t	*tmp_list = NULL;

	ASSERT(IAM_WRITER_ILL(ill));
	if (connp != NULL)
		q = CONNP_TO_WQ(connp);
	else
		q = ill->ill_wq;

	ipsq = ill->ill_phyint->phyint_ipsq;
	/*
	 * Cleanup the ioctl mp's queued in ipsq_xopq_pending_mp if any.
	 * In the case of ioctl from a conn, there can be only 1 mp
	 * queued on the ipsq. If an ill is being unplumbed, only messages
	 * related to this ill are flushed, like M_ERROR or M_HANGUP message.
	 * ioctls meant for this ill form conn's are not flushed. They will
	 * be processed during ipsq_exit and will not find the ill and will
	 * return error.
	 */
	mutex_enter(&ipsq->ipsq_lock);
	for (prev = NULL, curr = ipsq->ipsq_xopq_mphead; curr != NULL;
	    curr = next) {
		next = curr->b_next;
		if (curr->b_queue == q || curr->b_queue == RD(q)) {
			/* Unlink the mblk from the pending mp list */
			if (prev != NULL) {
				prev->b_next = curr->b_next;
			} else {
				ASSERT(ipsq->ipsq_xopq_mphead == curr);
				ipsq->ipsq_xopq_mphead = curr->b_next;
			}
			if (ipsq->ipsq_xopq_mptail == curr)
				ipsq->ipsq_xopq_mptail = prev;
			/*
			 * Create a temporary list and release the ipsq lock
			 * New elements are added to the head of the tmp_list
			 */
			curr->b_next = tmp_list;
			tmp_list = curr;
		} else {
			prev = curr;
		}
	}
	mutex_exit(&ipsq->ipsq_lock);

	while (tmp_list != NULL) {
		curr = tmp_list;
		tmp_list = curr->b_next;
		curr->b_next = NULL;
		curr->b_prev = NULL;
		curr->b_queue = NULL;
		if (DB_TYPE(curr) == M_IOCTL || DB_TYPE(curr) == M_IOCDATA) {
			ip_ioctl_finish(q, curr, ENXIO, connp != NULL ?
			    CONN_CLOSE : NO_COPYOUT, NULL, NULL);
		} else {
			/*
			 * IP-MT XXX In the case of TLI/XTI bind / optmgmt
			 * this can't be just inet_freemsg. we have to
			 * restart it otherwise the thread will be stuck.
			 */
			inet_freemsg(curr);
		}
	}
}

/*
 * This conn has started closing. Cleanup any pending ioctl from this conn.
 * STREAMS ensures that there can be at most 1 ioctl pending on a stream.
 */
void
conn_ioctl_cleanup(conn_t *connp)
{
	mblk_t *curr;
	ipsq_t	*ipsq;
	ill_t	*ill;
	boolean_t refheld;

	/*
	 * Is any exclusive ioctl pending ? If so clean it up. If the
	 * ioctl has not yet started, the mp is pending in the list headed by
	 * ipsq_xopq_head. If the ioctl has started the mp could be present in
	 * ipsq_pending_mp. If the ioctl timed out in the streamhead but
	 * is currently executing now the mp is not queued anywhere but
	 * conn_oper_pending_ill is null. The conn close will wait
	 * till the conn_ref drops to zero.
	 */
	mutex_enter(&connp->conn_lock);
	ill = connp->conn_oper_pending_ill;
	if (ill == NULL) {
		mutex_exit(&connp->conn_lock);
		return;
	}

	curr = ill_pending_mp_get(ill, &connp, 0);
	if (curr != NULL) {
		mutex_exit(&connp->conn_lock);
		CONN_DEC_REF(connp);
		inet_freemsg(curr);
		return;
	}
	/*
	 * We may not be able to refhold the ill if the ill/ipif
	 * is changing. But we need to make sure that the ill will
	 * not vanish. So we just bump up the ill_waiter count.
	 */
	refheld = ill_waiter_inc(ill);
	mutex_exit(&connp->conn_lock);
	if (refheld) {
		if (ipsq_enter(ill, B_TRUE)) {
			ill_waiter_dcr(ill);
			/*
			 * Check whether this ioctl has started and is
			 * pending now in ipsq_pending_mp. If it is not
			 * found there then check whether this ioctl has
			 * not even started and is in the ipsq_xopq list.
			 */
			if (!ipsq_pending_mp_cleanup(ill, connp))
				ipsq_xopq_mp_cleanup(ill, connp);
			ipsq = ill->ill_phyint->phyint_ipsq;
			ipsq_exit(ipsq, B_TRUE, B_TRUE);
			return;
		}
	}

	/*
	 * The ill is also closing and we could not bump up the
	 * ill_waiter_count or we could not enter the ipsq. Leave
	 * the cleanup to ill_delete
	 */
	mutex_enter(&connp->conn_lock);
	while (connp->conn_oper_pending_ill != NULL)
		cv_wait(&connp->conn_refcv, &connp->conn_lock);
	mutex_exit(&connp->conn_lock);
	if (refheld)
		ill_waiter_dcr(ill);
}

/*
 * ipcl_walk function for cleaning up conn_*_ill fields.
 */
static void
conn_cleanup_ill(conn_t *connp, caddr_t arg)
{
	ill_t	*ill = (ill_t *)arg;
	ire_t	*ire;

	mutex_enter(&connp->conn_lock);
	if (connp->conn_multicast_ill == ill) {
		/* Revert to late binding */
		connp->conn_multicast_ill = NULL;
		connp->conn_orig_multicast_ifindex = 0;
	}
	if (connp->conn_incoming_ill == ill)
		connp->conn_incoming_ill = NULL;
	if (connp->conn_outgoing_ill == ill)
		connp->conn_outgoing_ill = NULL;
	if (connp->conn_outgoing_pill == ill)
		connp->conn_outgoing_pill = NULL;
	if (connp->conn_nofailover_ill == ill)
		connp->conn_nofailover_ill = NULL;
	if (connp->conn_xmit_if_ill == ill)
		connp->conn_xmit_if_ill = NULL;
	if (connp->conn_ire_cache != NULL) {
		ire = connp->conn_ire_cache;
		/*
		 * ip_newroute creates IRE_CACHE with ire_stq coming from
		 * interface X and ipif coming from interface Y, if interface
		 * X and Y are part of the same IPMPgroup. Thus whenever
		 * interface X goes down, remove all references to it by
		 * checking both on ire_ipif and ire_stq.
		 */
		if ((ire->ire_ipif != NULL && ire->ire_ipif->ipif_ill == ill) ||
		    (ire->ire_type == IRE_CACHE &&
		    ire->ire_stq == ill->ill_wq)) {
			connp->conn_ire_cache = NULL;
			mutex_exit(&connp->conn_lock);
			ire_refrele_notr(ire);
			return;
		}
	}
	mutex_exit(&connp->conn_lock);

}

/* ARGSUSED */
void
ipif_all_down_tail(ipsq_t *ipsq, queue_t *q, mblk_t *mp, void *dummy_arg)
{
	ill_t	*ill = q->q_ptr;
	ipif_t	*ipif;

	ASSERT(IAM_WRITER_IPSQ(ipsq));
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		ipif_non_duplicate(ipif);
		ipif_down_tail(ipif);
	}
	ill_down_tail(ill);
	freemsg(mp);
	ipsq->ipsq_current_ipif = NULL;
}

/*
 * ill_down_start is called when we want to down this ill and bring it up again
 * It is called when we receive an M_ERROR / M_HANGUP. In this case we shut down
 * all interfaces, but don't tear down any plumbing.
 */
boolean_t
ill_down_start(queue_t *q, mblk_t *mp)
{
	ill_t	*ill;
	ipif_t	*ipif;

	ill = q->q_ptr;

	ASSERT(IAM_WRITER_ILL(ill));

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next)
		(void) ipif_down(ipif, NULL, NULL);

	ill_down(ill);

	(void) ipsq_pending_mp_cleanup(ill, NULL);
	mutex_enter(&ill->ill_lock);
	/*
	 * Atomically test and add the pending mp if references are
	 * still active.
	 */
	if (!ill_is_quiescent(ill)) {
		/*
		 * Get rid of any pending mps and cleanup. Call will
		 * not fail since we are passing a null connp.
		 */
		(void) ipsq_pending_mp_add(NULL, ill->ill_ipif, ill->ill_rq,
		    mp, ILL_DOWN);
		mutex_exit(&ill->ill_lock);
		return (B_FALSE);
	}
	mutex_exit(&ill->ill_lock);
	return (B_TRUE);
}

static void
ill_down(ill_t *ill)
{
	/* Blow off any IREs dependent on this ILL. */
	ire_walk(ill_downi, (char *)ill);

	mutex_enter(&ire_mrtun_lock);
	if (ire_mrtun_count != 0) {
		mutex_exit(&ire_mrtun_lock);
		ire_walk_ill_mrtun(0, 0, ill_downi_mrtun_srcif,
		    (char *)ill, NULL);
	} else {
		mutex_exit(&ire_mrtun_lock);
	}

	/*
	 * If any interface based forwarding table exists
	 * Blow off the ires there dependent on this ill
	 */
	mutex_enter(&ire_srcif_table_lock);
	if (ire_srcif_table_count > 0) {
		mutex_exit(&ire_srcif_table_lock);
		ire_walk_srcif_table_v4(ill_downi_mrtun_srcif, (char *)ill);
	} else {
		mutex_exit(&ire_srcif_table_lock);
	}

	/* Remove any conn_*_ill depending on this ill */
	ipcl_walk(conn_cleanup_ill, (caddr_t)ill);

	if (ill->ill_group != NULL) {
		illgrp_delete(ill);
	}

}

static void
ill_down_tail(ill_t *ill)
{
	int	i;

	/* Destroy ill_srcif_table if it exists */
	/* Lock not reqd really because nobody should be able to access */
	mutex_enter(&ill->ill_lock);
	if (ill->ill_srcif_table != NULL) {
		ill->ill_srcif_refcnt = 0;
		for (i = 0; i < IP_SRCIF_TABLE_SIZE; i++) {
			rw_destroy(&ill->ill_srcif_table[i].irb_lock);
		}
		kmem_free(ill->ill_srcif_table,
		    IP_SRCIF_TABLE_SIZE * sizeof (irb_t));
		ill->ill_srcif_table = NULL;
		ill->ill_srcif_refcnt = 0;
		ill->ill_mrtun_refcnt = 0;
	}
	mutex_exit(&ill->ill_lock);
}

/*
 * ire_walk routine used to delete every IRE that depends on queues
 * associated with 'ill'.  (Always called as writer.)
 */
static void
ill_downi(ire_t *ire, char *ill_arg)
{
	ill_t	*ill = (ill_t *)ill_arg;

	/*
	 * ip_newroute creates IRE_CACHE with ire_stq coming from
	 * interface X and ipif coming from interface Y, if interface
	 * X and Y are part of the same IPMP group. Thus whenever interface
	 * X goes down, remove all references to it by checking both
	 * on ire_ipif and ire_stq.
	 */
	if ((ire->ire_ipif != NULL && ire->ire_ipif->ipif_ill == ill) ||
	    (ire->ire_type == IRE_CACHE && ire->ire_stq == ill->ill_wq)) {
		ire_delete(ire);
	}
}

/*
 * A seperate routine for deleting revtun and srcif based routes
 * are needed because the ires only deleted when the interface
 * is unplumbed. Also these ires have ire_in_ill non-null as well.
 * we want to keep mobile IP specific code separate.
 */
static void
ill_downi_mrtun_srcif(ire_t *ire, char *ill_arg)
{
	ill_t   *ill = (ill_t *)ill_arg;

	ASSERT(ire->ire_in_ill != NULL);

	if ((ire->ire_in_ill != NULL && ire->ire_in_ill == ill) ||
	    (ire->ire_stq == ill->ill_wq) || (ire->ire_stq == ill->ill_rq)) {
		ire_delete(ire);
	}
}

/*
 * Remove ire/nce from the fastpath list.
 */
void
ill_fastpath_nack(ill_t *ill)
{
	if (ill->ill_isv6) {
		nce_fastpath_list_dispatch(ill, NULL, NULL);
	} else {
		ire_fastpath_list_dispatch(ill, NULL, NULL);
	}
}

/* Consume an M_IOCACK of the fastpath probe. */
void
ill_fastpath_ack(ill_t *ill, mblk_t *mp)
{
	mblk_t	*mp1 = mp;

	/*
	 * If this was the first attempt turn on the fastpath probing.
	 */
	mutex_enter(&ill->ill_lock);
	if (ill->ill_dlpi_fastpath_state == IDMS_INPROGRESS)
		ill->ill_dlpi_fastpath_state = IDMS_OK;
	mutex_exit(&ill->ill_lock);

	/* Free the M_IOCACK mblk, hold on to the data */
	mp = mp->b_cont;
	freeb(mp1);
	if (mp == NULL)
		return;
	if (mp->b_cont != NULL) {
		/*
		 * Update all IRE's or NCE's that are waiting for
		 * fastpath update.
		 */
		if (ill->ill_isv6) {
			/*
			 * update nce's in the fastpath list.
			 */
			nce_fastpath_list_dispatch(ill,
			    ndp_fastpath_update, mp);
		} else {

			/*
			 * update ire's in the fastpath list.
			 */
			ire_fastpath_list_dispatch(ill,
			    ire_fastpath_update, mp);
			/*
			 * Check if we need to traverse reverse tunnel table.
			 * Since there is only single ire_type (IRE_MIPRTUN)
			 * in the table, we don't need to match on ire_type.
			 * We have to check ire_mrtun_count and not the
			 * ill_mrtun_refcnt since ill_mrtun_refcnt is set
			 * on the incoming ill and here we are dealing with
			 * outgoing ill.
			 */
			mutex_enter(&ire_mrtun_lock);
			if (ire_mrtun_count != 0) {
				mutex_exit(&ire_mrtun_lock);
				ire_walk_ill_mrtun(MATCH_IRE_WQ, IRE_MIPRTUN,
				    (void (*)(ire_t *, void *))
					ire_fastpath_update, mp, ill);
			} else {
				mutex_exit(&ire_mrtun_lock);
			}
		}
		mp1 = mp->b_cont;
		freeb(mp);
		mp = mp1;
	} else {
		ip0dbg(("ill_fastpath_ack:  no b_cont\n"));
	}

	freeb(mp);
}

/*
 * Throw an M_IOCTL message downstream asking "do you know fastpath?"
 * The data portion of the request is a dl_unitdata_req_t template for
 * what we would send downstream in the absence of a fastpath confirmation.
 */
int
ill_fastpath_probe(ill_t *ill, mblk_t *dlur_mp)
{
	struct iocblk	*ioc;
	mblk_t	*mp;

	if (dlur_mp == NULL)
		return (EINVAL);

	mutex_enter(&ill->ill_lock);
	switch (ill->ill_dlpi_fastpath_state) {
	case IDMS_FAILED:
		/*
		 * Driver NAKed the first fastpath ioctl - assume it doesn't
		 * support it.
		 */
		mutex_exit(&ill->ill_lock);
		return (ENOTSUP);
	case IDMS_UNKNOWN:
		/* This is the first probe */
		ill->ill_dlpi_fastpath_state = IDMS_INPROGRESS;
		break;
	default:
		break;
	}
	mutex_exit(&ill->ill_lock);

	if ((mp = mkiocb(DL_IOC_HDR_INFO)) == NULL)
		return (EAGAIN);

	mp->b_cont = copyb(dlur_mp);
	if (mp->b_cont == NULL) {
		freeb(mp);
		return (EAGAIN);
	}

	ioc = (struct iocblk *)mp->b_rptr;
	ioc->ioc_count = msgdsize(mp->b_cont);

	putnext(ill->ill_wq, mp);
	return (0);
}

void
ill_capability_probe(ill_t *ill)
{
	/*
	 * Do so only if negotiation is enabled, capabilities are unknown,
	 * and a capability negotiation is not already in progress.
	 */
	if (ill->ill_capab_state != IDMS_UNKNOWN &&
	    ill->ill_capab_state != IDMS_RENEG)
		return;

	ill->ill_capab_state = IDMS_INPROGRESS;
	ip1dbg(("ill_capability_probe: starting capability negotiation\n"));
	ill_capability_proto(ill, DL_CAPABILITY_REQ, NULL);
}

void
ill_capability_reset(ill_t *ill)
{
	mblk_t *sc_mp = NULL;
	mblk_t *tmp;

	/*
	 * Note here that we reset the state to UNKNOWN, and later send
	 * down the DL_CAPABILITY_REQ without first setting the state to
	 * INPROGRESS.  We do this in order to distinguish the
	 * DL_CAPABILITY_ACK response which may come back in response to
	 * a "reset" apart from the "probe" DL_CAPABILITY_REQ.  This would
	 * also handle the case where the driver doesn't send us back
	 * a DL_CAPABILITY_ACK in response, since the "probe" routine
	 * requires the state to be in UNKNOWN anyway.  In any case, all
	 * features are turned off until the state reaches IDMS_OK.
	 */
	ill->ill_capab_state = IDMS_UNKNOWN;

	/*
	 * Disable sub-capabilities and request a list of sub-capability
	 * messages which will be sent down to the driver.  Each handler
	 * allocates the corresponding dl_capability_sub_t inside an
	 * mblk, and links it to the existing sc_mp mblk, or return it
	 * as sc_mp if it's the first sub-capability (the passed in
	 * sc_mp is NULL).  Upon returning from all capability handlers,
	 * sc_mp will be pulled-up, before passing it downstream.
	 */
	ill_capability_mdt_reset(ill, &sc_mp);
	ill_capability_hcksum_reset(ill, &sc_mp);
	ill_capability_zerocopy_reset(ill, &sc_mp);
	ill_capability_ipsec_reset(ill, &sc_mp);
	ill_capability_dls_reset(ill, &sc_mp);

	/* Nothing to send down in order to disable the capabilities? */
	if (sc_mp == NULL)
		return;

	tmp = msgpullup(sc_mp, -1);
	freemsg(sc_mp);
	if ((sc_mp = tmp) == NULL) {
		cmn_err(CE_WARN, "ill_capability_reset: unable to send down "
		    "DL_CAPABILITY_REQ (ENOMEM)\n");
		return;
	}

	ip1dbg(("ill_capability_reset: resetting negotiated capabilities\n"));
	ill_capability_proto(ill, DL_CAPABILITY_REQ, sc_mp);
}

/*
 * Request or set new-style hardware capabilities supported by DLS provider.
 */
static void
ill_capability_proto(ill_t *ill, int type, mblk_t *reqp)
{
	mblk_t *mp;
	dl_capability_req_t *capb;
	size_t size = 0;
	uint8_t *ptr;

	if (reqp != NULL)
		size = MBLKL(reqp);

	mp = ip_dlpi_alloc(sizeof (dl_capability_req_t) + size, type);
	if (mp == NULL) {
		freemsg(reqp);
		return;
	}
	ptr = mp->b_rptr;

	capb = (dl_capability_req_t *)ptr;
	ptr += sizeof (dl_capability_req_t);

	if (reqp != NULL) {
		capb->dl_sub_offset = sizeof (dl_capability_req_t);
		capb->dl_sub_length = size;
		bcopy(reqp->b_rptr, ptr, size);
		ptr += size;
		mp->b_cont = reqp->b_cont;
		freeb(reqp);
	}
	ASSERT(ptr == mp->b_wptr);

	ill_dlpi_send(ill, mp);
}

static void
ill_capability_id_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *outers)
{
	dl_capab_id_t *id_ic;
	uint_t sub_dl_cap = outers->dl_cap;
	dl_capability_sub_t *inners;
	uint8_t *capend;

	ASSERT(sub_dl_cap == DL_CAPAB_ID_WRAPPER);

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */

	capend = (uint8_t *)(outers + 1) + outers->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_id_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	id_ic = (dl_capab_id_t *)(outers + 1);

	if (outers->dl_length < sizeof (*id_ic) ||
	    (inners = &id_ic->id_subcap,
	    inners->dl_length > (outers->dl_length - sizeof (*inners)))) {
		cmn_err(CE_WARN, "ill_capability_id_ack: malformed "
		    "encapsulated capab type %d too long for mblk",
		    inners->dl_cap);
		return;
	}

	if (!dlcapabcheckqid(&id_ic->id_mid, ill->ill_lmod_rq)) {
		ip1dbg(("ill_capability_id_ack: mid token for capab type %d "
		    "isn't as expected; pass-thru module(s) detected, "
		    "discarding capability\n", inners->dl_cap));
		return;
	}

	/* Process the encapsulated sub-capability */
	ill_capability_dispatch(ill, mp, inners, B_TRUE);
}

/*
 * Process Multidata Transmit capability negotiation ack received from a
 * DLS Provider.  isub must point to the sub-capability (DL_CAPAB_MDT) of a
 * DL_CAPABILITY_ACK message.
 */
static void
ill_capability_mdt_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *isub)
{
	mblk_t *nmp = NULL;
	dl_capability_req_t *oc;
	dl_capab_mdt_t *mdt_ic, *mdt_oc;
	ill_mdt_capab_t **ill_mdt_capab;
	uint_t sub_dl_cap = isub->dl_cap;
	uint8_t *capend;

	ASSERT(sub_dl_cap == DL_CAPAB_MDT);

	ill_mdt_capab = (ill_mdt_capab_t **)&ill->ill_mdt_capab;

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */

	capend = (uint8_t *)(isub + 1) + isub->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_mdt_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	mdt_ic = (dl_capab_mdt_t *)(isub + 1);

	if (mdt_ic->mdt_version != MDT_VERSION_2) {
		cmn_err(CE_CONT, "ill_capability_mdt_ack: "
		    "unsupported MDT sub-capability (version %d, expected %d)",
		    mdt_ic->mdt_version, MDT_VERSION_2);
		return;
	}

	if (!dlcapabcheckqid(&mdt_ic->mdt_mid, ill->ill_lmod_rq)) {
		ip1dbg(("ill_capability_mdt_ack: mid token for MDT "
		    "capability isn't as expected; pass-thru module(s) "
		    "detected, discarding capability\n"));
		return;
	}

	if (mdt_ic->mdt_flags & DL_CAPAB_MDT_ENABLE) {

		if (*ill_mdt_capab == NULL) {
			*ill_mdt_capab = kmem_zalloc(sizeof (ill_mdt_capab_t),
			    KM_NOSLEEP);

			if (*ill_mdt_capab == NULL) {
				cmn_err(CE_WARN, "ill_capability_mdt_ack: "
				    "could not enable MDT version %d "
				    "for %s (ENOMEM)\n", MDT_VERSION_2,
				    ill->ill_name);
				return;
			}
		}

		ip1dbg(("ill_capability_mdt_ack: interface %s supports "
		    "MDT version %d (%d bytes leading, %d bytes trailing "
		    "header spaces, %d max pld bufs, %d span limit)\n",
		    ill->ill_name, MDT_VERSION_2,
		    mdt_ic->mdt_hdr_head, mdt_ic->mdt_hdr_tail,
		    mdt_ic->mdt_max_pld, mdt_ic->mdt_span_limit));

		(*ill_mdt_capab)->ill_mdt_version = MDT_VERSION_2;
		(*ill_mdt_capab)->ill_mdt_on = 1;
		/*
		 * Round the following values to the nearest 32-bit; ULP
		 * may further adjust them to accomodate for additional
		 * protocol headers.  We pass these values to ULP during
		 * bind time.
		 */
		(*ill_mdt_capab)->ill_mdt_hdr_head =
		    roundup(mdt_ic->mdt_hdr_head, 4);
		(*ill_mdt_capab)->ill_mdt_hdr_tail =
		    roundup(mdt_ic->mdt_hdr_tail, 4);
		(*ill_mdt_capab)->ill_mdt_max_pld = mdt_ic->mdt_max_pld;
		(*ill_mdt_capab)->ill_mdt_span_limit = mdt_ic->mdt_span_limit;

		ill->ill_capabilities |= ILL_CAPAB_MDT;
	} else {
		uint_t size;
		uchar_t *rptr;

		size = sizeof (dl_capability_req_t) +
		    sizeof (dl_capability_sub_t) + sizeof (dl_capab_mdt_t);

		if ((nmp = ip_dlpi_alloc(size, DL_CAPABILITY_REQ)) == NULL) {
			cmn_err(CE_WARN, "ill_capability_mdt_ack: "
			    "could not enable MDT for %s (ENOMEM)\n",
			    ill->ill_name);
			return;
		}

		rptr = nmp->b_rptr;
		/* initialize dl_capability_req_t */
		oc = (dl_capability_req_t *)nmp->b_rptr;
		oc->dl_sub_offset = sizeof (dl_capability_req_t);
		oc->dl_sub_length = sizeof (dl_capability_sub_t) +
		    sizeof (dl_capab_mdt_t);
		nmp->b_rptr += sizeof (dl_capability_req_t);

		/* initialize dl_capability_sub_t */
		bcopy(isub, nmp->b_rptr, sizeof (*isub));
		nmp->b_rptr += sizeof (*isub);

		/* initialize dl_capab_mdt_t */
		mdt_oc = (dl_capab_mdt_t *)nmp->b_rptr;
		bcopy(mdt_ic, mdt_oc, sizeof (*mdt_ic));

		nmp->b_rptr = rptr;

		ip1dbg(("ill_capability_mdt_ack: asking interface %s "
		    "to enable MDT version %d\n", ill->ill_name,
		    MDT_VERSION_2));

		/* set ENABLE flag */
		mdt_oc->mdt_flags |= DL_CAPAB_MDT_ENABLE;

		/* nmp points to a DL_CAPABILITY_REQ message to enable MDT */
		ill_dlpi_send(ill, nmp);
	}
}

static void
ill_capability_mdt_reset(ill_t *ill, mblk_t **sc_mp)
{
	mblk_t *mp;
	dl_capab_mdt_t *mdt_subcap;
	dl_capability_sub_t *dl_subcap;
	int size;

	if (!ILL_MDT_CAPABLE(ill))
		return;

	ASSERT(ill->ill_mdt_capab != NULL);
	/*
	 * Clear the capability flag for MDT but retain the ill_mdt_capab
	 * structure since it's possible that another thread is still
	 * referring to it.  The structure only gets deallocated when
	 * we destroy the ill.
	 */
	ill->ill_capabilities &= ~ILL_CAPAB_MDT;

	size = sizeof (*dl_subcap) + sizeof (*mdt_subcap);

	mp = allocb(size, BPRI_HI);
	if (mp == NULL) {
		ip1dbg(("ill_capability_mdt_reset: unable to allocate "
		    "request to disable MDT\n"));
		return;
	}

	mp->b_wptr = mp->b_rptr + size;

	dl_subcap = (dl_capability_sub_t *)mp->b_rptr;
	dl_subcap->dl_cap = DL_CAPAB_MDT;
	dl_subcap->dl_length = sizeof (*mdt_subcap);

	mdt_subcap = (dl_capab_mdt_t *)(dl_subcap + 1);
	mdt_subcap->mdt_version = ill->ill_mdt_capab->ill_mdt_version;
	mdt_subcap->mdt_flags = 0;
	mdt_subcap->mdt_hdr_head = 0;
	mdt_subcap->mdt_hdr_tail = 0;

	if (*sc_mp != NULL)
		linkb(*sc_mp, mp);
	else
		*sc_mp = mp;
}

/*
 * Send a DL_NOTIFY_REQ to the specified ill to enable
 * DL_NOTE_PROMISC_ON/OFF_PHYS notifications.
 * Invoked by ill_capability_ipsec_ack() before enabling IPsec hardware
 * acceleration.
 * Returns B_TRUE on success, B_FALSE if the message could not be sent.
 */
static boolean_t
ill_enable_promisc_notify(ill_t *ill)
{
	mblk_t *mp;
	dl_notify_req_t *req;

	IPSECHW_DEBUG(IPSECHW_PKT, ("ill_enable_promisc_notify:\n"));

	mp = ip_dlpi_alloc(sizeof (dl_notify_req_t), DL_NOTIFY_REQ);
	if (mp == NULL)
		return (B_FALSE);

	req = (dl_notify_req_t *)mp->b_rptr;
	req->dl_notifications = DL_NOTE_PROMISC_ON_PHYS |
	    DL_NOTE_PROMISC_OFF_PHYS;

	ill_dlpi_send(ill, mp);

	return (B_TRUE);
}


/*
 * Allocate an IPsec capability request which will be filled by our
 * caller to turn on support for one or more algorithms.
 */
static mblk_t *
ill_alloc_ipsec_cap_req(ill_t *ill, dl_capability_sub_t *isub)
{
	mblk_t *nmp;
	dl_capability_req_t	*ocap;
	dl_capab_ipsec_t	*ocip;
	dl_capab_ipsec_t	*icip;
	uint8_t			*ptr;
	icip = (dl_capab_ipsec_t *)(isub + 1);

	/*
	 * The first time around, we send a DL_NOTIFY_REQ to enable
	 * PROMISC_ON/OFF notification from the provider. We need to
	 * do this before enabling the algorithms to avoid leakage of
	 * cleartext packets.
	 */

	if (!ill_enable_promisc_notify(ill))
		return (NULL);

	/*
	 * Allocate new mblk which will contain a new capability
	 * request to enable the capabilities.
	 */

	nmp = ip_dlpi_alloc(sizeof (dl_capability_req_t) +
	    sizeof (dl_capability_sub_t) + isub->dl_length, DL_CAPABILITY_REQ);
	if (nmp == NULL)
		return (NULL);

	ptr = nmp->b_rptr;

	/* initialize dl_capability_req_t */
	ocap = (dl_capability_req_t *)ptr;
	ocap->dl_sub_offset = sizeof (dl_capability_req_t);
	ocap->dl_sub_length = sizeof (dl_capability_sub_t) + isub->dl_length;
	ptr += sizeof (dl_capability_req_t);

	/* initialize dl_capability_sub_t */
	bcopy(isub, ptr, sizeof (*isub));
	ptr += sizeof (*isub);

	/* initialize dl_capab_ipsec_t */
	ocip = (dl_capab_ipsec_t *)ptr;
	bcopy(icip, ocip, sizeof (*icip));

	nmp->b_wptr = (uchar_t *)(&ocip->cip_data[0]);
	return (nmp);
}

/*
 * Process an IPsec capability negotiation ack received from a DLS Provider.
 * isub must point to the sub-capability (DL_CAPAB_IPSEC_AH or
 * DL_CAPAB_IPSEC_ESP) of a DL_CAPABILITY_ACK message.
 */
static void
ill_capability_ipsec_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *isub)
{
	dl_capab_ipsec_t	*icip;
	dl_capab_ipsec_alg_t	*ialg;	/* ptr to input alg spec. */
	dl_capab_ipsec_alg_t	*oalg;	/* ptr to output alg spec. */
	uint_t cipher, nciphers;
	mblk_t *nmp;
	uint_t alg_len;
	boolean_t need_sadb_dump;
	uint_t sub_dl_cap = isub->dl_cap;
	ill_ipsec_capab_t **ill_capab;
	uint64_t ill_capab_flag;
	uint8_t *capend, *ciphend;
	boolean_t sadb_resync;

	ASSERT(sub_dl_cap == DL_CAPAB_IPSEC_AH ||
	    sub_dl_cap == DL_CAPAB_IPSEC_ESP);

	if (sub_dl_cap == DL_CAPAB_IPSEC_AH) {
		ill_capab = (ill_ipsec_capab_t **)&ill->ill_ipsec_capab_ah;
		ill_capab_flag = ILL_CAPAB_AH;
	} else {
		ill_capab = (ill_ipsec_capab_t **)&ill->ill_ipsec_capab_esp;
		ill_capab_flag = ILL_CAPAB_ESP;
	}

	/*
	 * If the ill capability structure exists, then this incoming
	 * DL_CAPABILITY_ACK is a response to a "renegotiation" cycle.
	 * If this is so, then we'd need to resynchronize the SADB
	 * after re-enabling the offloaded ciphers.
	 */
	sadb_resync = (*ill_capab != NULL);

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */

	capend = (uint8_t *)(isub + 1) + isub->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_ipsec_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	/*
	 * There are two types of acks we process here:
	 * 1. acks in reply to a (first form) generic capability req
	 *    (no ENABLE flag set)
	 * 2. acks in reply to a ENABLE capability req.
	 *    (ENABLE flag set)
	 *
	 * We process the subcapability passed as argument as follows:
	 * 1 do initializations
	 *   1.1 initialize nmp = NULL
	 *   1.2 set need_sadb_dump to B_FALSE
	 * 2 for each cipher in subcapability:
	 *   2.1 if ENABLE flag is set:
	 *	2.1.1 update per-ill ipsec capabilities info
	 *	2.1.2 set need_sadb_dump to B_TRUE
	 *   2.2 if ENABLE flag is not set:
	 *	2.2.1 if nmp is NULL:
	 *		2.2.1.1 allocate and initialize nmp
	 *		2.2.1.2 init current pos in nmp
	 *	2.2.2 copy current cipher to current pos in nmp
	 *	2.2.3 set ENABLE flag in nmp
	 *	2.2.4 update current pos
	 * 3 if nmp is not equal to NULL, send enable request
	 *   3.1 send capability request
	 * 4 if need_sadb_dump is B_TRUE
	 *   4.1 enable promiscuous on/off notifications
	 *   4.2 call ill_dlpi_send(isub->dlcap) to send all
	 *	AH or ESP SA's to interface.
	 */

	nmp = NULL;
	oalg = NULL;
	need_sadb_dump = B_FALSE;
	icip = (dl_capab_ipsec_t *)(isub + 1);
	ialg = (dl_capab_ipsec_alg_t *)(&icip->cip_data[0]);

	nciphers = icip->cip_nciphers;
	ciphend = (uint8_t *)(ialg + icip->cip_nciphers);

	if (ciphend > capend) {
		cmn_err(CE_WARN, "ill_capability_ipsec_ack: "
		    "too many ciphers for sub-capability len");
		return;
	}

	for (cipher = 0; cipher < nciphers; cipher++) {
		alg_len = sizeof (dl_capab_ipsec_alg_t);

		if (ialg->alg_flag & DL_CAPAB_ALG_ENABLE) {
			/*
			 * TBD: when we provide a way to disable capabilities
			 * from above, need to manage the request-pending state
			 * and fail if we were not expecting this ACK.
			 */
			IPSECHW_DEBUG(IPSECHW_CAPAB,
			    ("ill_capability_ipsec_ack: got ENABLE ACK\n"));

			/*
			 * Update IPsec capabilities for this ill
			 */

			if (*ill_capab == NULL) {
				IPSECHW_DEBUG(IPSECHW_CAPAB,
				    ("ill_capability_ipsec_ack: "
					"allocating ipsec_capab for ill\n"));
				*ill_capab = ill_ipsec_capab_alloc();

				if (*ill_capab == NULL) {
					cmn_err(CE_WARN,
					    "ill_capability_ipsec_ack: "
					    "could not enable IPsec Hardware "
					    "acceleration for %s (ENOMEM)\n",
					    ill->ill_name);
					return;
				}
			}

			ASSERT(ialg->alg_type == DL_CAPAB_IPSEC_ALG_AUTH ||
			    ialg->alg_type == DL_CAPAB_IPSEC_ALG_ENCR);

			if (ialg->alg_prim >= MAX_IPSEC_ALGS) {
				cmn_err(CE_WARN,
				    "ill_capability_ipsec_ack: "
				    "malformed IPsec algorithm id %d",
				    ialg->alg_prim);
				continue;
			}

			if (ialg->alg_type == DL_CAPAB_IPSEC_ALG_AUTH) {
				IPSEC_ALG_ENABLE((*ill_capab)->auth_hw_algs,
				    ialg->alg_prim);
			} else {
				ipsec_capab_algparm_t *alp;

				IPSEC_ALG_ENABLE((*ill_capab)->encr_hw_algs,
				    ialg->alg_prim);
				if (!ill_ipsec_capab_resize_algparm(*ill_capab,
				    ialg->alg_prim)) {
					cmn_err(CE_WARN,
					    "ill_capability_ipsec_ack: "
					    "no space for IPsec alg id %d",
					    ialg->alg_prim);
					continue;
				}
				alp = &((*ill_capab)->encr_algparm[
						ialg->alg_prim]);
				alp->minkeylen = ialg->alg_minbits;
				alp->maxkeylen = ialg->alg_maxbits;
			}
			ill->ill_capabilities |= ill_capab_flag;
			/*
			 * indicate that a capability was enabled, which
			 * will be used below to kick off a SADB dump
			 * to the ill.
			 */
			need_sadb_dump = B_TRUE;
		} else {
			IPSECHW_DEBUG(IPSECHW_CAPAB,
			    ("ill_capability_ipsec_ack: enabling alg 0x%x\n",
				ialg->alg_prim));

			if (nmp == NULL) {
				nmp = ill_alloc_ipsec_cap_req(ill, isub);
				if (nmp == NULL) {
					/*
					 * Sending the PROMISC_ON/OFF
					 * notification request failed.
					 * We cannot enable the algorithms
					 * since the Provider will not
					 * notify IP of promiscous mode
					 * changes, which could lead
					 * to leakage of packets.
					 */
					cmn_err(CE_WARN,
					    "ill_capability_ipsec_ack: "
					    "could not enable IPsec Hardware "
					    "acceleration for %s (ENOMEM)\n",
					    ill->ill_name);
					return;
				}
				/* ptr to current output alg specifier */
				oalg = (dl_capab_ipsec_alg_t *)nmp->b_wptr;
			}

			/*
			 * Copy current alg specifier, set ENABLE
			 * flag, and advance to next output alg.
			 * For now we enable all IPsec capabilities.
			 */
			ASSERT(oalg != NULL);
			bcopy(ialg, oalg, alg_len);
			oalg->alg_flag |= DL_CAPAB_ALG_ENABLE;
			nmp->b_wptr += alg_len;
			oalg = (dl_capab_ipsec_alg_t *)nmp->b_wptr;
		}

		/* move to next input algorithm specifier */
		ialg = (dl_capab_ipsec_alg_t *)
		    ((char *)ialg + alg_len);
	}

	if (nmp != NULL)
		/*
		 * nmp points to a DL_CAPABILITY_REQ message to enable
		 * IPsec hardware acceleration.
		 */
		ill_dlpi_send(ill, nmp);

	if (need_sadb_dump)
		/*
		 * An acknowledgement corresponding to a request to
		 * enable acceleration was received, notify SADB.
		 */
		ill_ipsec_capab_add(ill, sub_dl_cap, sadb_resync);
}

/*
 * Given an mblk with enough space in it, create sub-capability entries for
 * DL_CAPAB_IPSEC_{AH,ESP} types which consist of previously-advertised
 * offloaded ciphers (both AUTH and ENCR) with their enable flags cleared,
 * in preparation for the reset the DL_CAPABILITY_REQ message.
 */
static void
ill_fill_ipsec_reset(uint_t nciphers, int stype, uint_t slen,
    ill_ipsec_capab_t *ill_cap, mblk_t *mp)
{
	dl_capab_ipsec_t *oipsec;
	dl_capab_ipsec_alg_t *oalg;
	dl_capability_sub_t *dl_subcap;
	int i, k;

	ASSERT(nciphers > 0);
	ASSERT(ill_cap != NULL);
	ASSERT(mp != NULL);
	ASSERT(MBLKTAIL(mp) >= sizeof (*dl_subcap) + sizeof (*oipsec) + slen);

	/* dl_capability_sub_t for "stype" */
	dl_subcap = (dl_capability_sub_t *)mp->b_wptr;
	dl_subcap->dl_cap = stype;
	dl_subcap->dl_length = sizeof (dl_capab_ipsec_t) + slen;
	mp->b_wptr += sizeof (dl_capability_sub_t);

	/* dl_capab_ipsec_t for "stype" */
	oipsec = (dl_capab_ipsec_t *)mp->b_wptr;
	oipsec->cip_version = 1;
	oipsec->cip_nciphers = nciphers;
	mp->b_wptr = (uchar_t *)&oipsec->cip_data[0];

	/* create entries for "stype" AUTH ciphers */
	for (i = 0; i < ill_cap->algs_size; i++) {
		for (k = 0; k < BITSPERBYTE; k++) {
			if ((ill_cap->auth_hw_algs[i] & (1 << k)) == 0)
				continue;

			oalg = (dl_capab_ipsec_alg_t *)mp->b_wptr;
			bzero((void *)oalg, sizeof (*oalg));
			oalg->alg_type = DL_CAPAB_IPSEC_ALG_AUTH;
			oalg->alg_prim = k + (BITSPERBYTE * i);
			mp->b_wptr += sizeof (dl_capab_ipsec_alg_t);
		}
	}
	/* create entries for "stype" ENCR ciphers */
	for (i = 0; i < ill_cap->algs_size; i++) {
		for (k = 0; k < BITSPERBYTE; k++) {
			if ((ill_cap->encr_hw_algs[i] & (1 << k)) == 0)
				continue;

			oalg = (dl_capab_ipsec_alg_t *)mp->b_wptr;
			bzero((void *)oalg, sizeof (*oalg));
			oalg->alg_type = DL_CAPAB_IPSEC_ALG_ENCR;
			oalg->alg_prim = k + (BITSPERBYTE * i);
			mp->b_wptr += sizeof (dl_capab_ipsec_alg_t);
		}
	}
}

/*
 * Macro to count number of 1s in a byte (8-bit word).  The total count is
 * accumulated into the passed-in argument (sum).  We could use SPARCv9's
 * POPC instruction, but our macro is more flexible for an arbitrary length
 * of bytes, such as {auth,encr}_hw_algs.  These variables are currently
 * 256-bits long (MAX_IPSEC_ALGS), so if we know for sure that the length
 * stays that way, we can reduce the number of iterations required.
 */
#define	COUNT_1S(val, sum) {					\
	uint8_t x = val & 0xff;					\
	x = (x & 0x55) + ((x >> 1) & 0x55);			\
	x = (x & 0x33) + ((x >> 2) & 0x33);			\
	sum += (x & 0xf) + ((x >> 4) & 0xf);			\
}

/* ARGSUSED */
static void
ill_capability_ipsec_reset(ill_t *ill, mblk_t **sc_mp)
{
	mblk_t *mp;
	ill_ipsec_capab_t *cap_ah = ill->ill_ipsec_capab_ah;
	ill_ipsec_capab_t *cap_esp = ill->ill_ipsec_capab_esp;
	uint64_t ill_capabilities = ill->ill_capabilities;
	int ah_cnt = 0, esp_cnt = 0;
	int ah_len = 0, esp_len = 0;
	int i, size = 0;

	if (!(ill_capabilities & (ILL_CAPAB_AH | ILL_CAPAB_ESP)))
		return;

	ASSERT(cap_ah != NULL || !(ill_capabilities & ILL_CAPAB_AH));
	ASSERT(cap_esp != NULL || !(ill_capabilities & ILL_CAPAB_ESP));

	/* Find out the number of ciphers for AH */
	if (cap_ah != NULL) {
		for (i = 0; i < cap_ah->algs_size; i++) {
			COUNT_1S(cap_ah->auth_hw_algs[i], ah_cnt);
			COUNT_1S(cap_ah->encr_hw_algs[i], ah_cnt);
		}
		if (ah_cnt > 0) {
			size += sizeof (dl_capability_sub_t) +
			    sizeof (dl_capab_ipsec_t);
			/* dl_capab_ipsec_t contains one dl_capab_ipsec_alg_t */
			ah_len = (ah_cnt - 1) * sizeof (dl_capab_ipsec_alg_t);
			size += ah_len;
		}
	}

	/* Find out the number of ciphers for ESP */
	if (cap_esp != NULL) {
		for (i = 0; i < cap_esp->algs_size; i++) {
			COUNT_1S(cap_esp->auth_hw_algs[i], esp_cnt);
			COUNT_1S(cap_esp->encr_hw_algs[i], esp_cnt);
		}
		if (esp_cnt > 0) {
			size += sizeof (dl_capability_sub_t) +
			    sizeof (dl_capab_ipsec_t);
			/* dl_capab_ipsec_t contains one dl_capab_ipsec_alg_t */
			esp_len = (esp_cnt - 1) * sizeof (dl_capab_ipsec_alg_t);
			size += esp_len;
		}
	}

	if (size == 0) {
		ip1dbg(("ill_capability_ipsec_reset: capabilities exist but "
		    "there's nothing to reset\n"));
		return;
	}

	mp = allocb(size, BPRI_HI);
	if (mp == NULL) {
		ip1dbg(("ill_capability_ipsec_reset: unable to allocate "
		    "request to disable IPSEC Hardware Acceleration\n"));
		return;
	}

	/*
	 * Clear the capability flags for IPSec HA but retain the ill
	 * capability structures since it's possible that another thread
	 * is still referring to them.  The structures only get deallocated
	 * when we destroy the ill.
	 *
	 * Various places check the flags to see if the ill is capable of
	 * hardware acceleration, and by clearing them we ensure that new
	 * outbound IPSec packets are sent down encrypted.
	 */
	ill->ill_capabilities &= ~(ILL_CAPAB_AH | ILL_CAPAB_ESP);

	/* Fill in DL_CAPAB_IPSEC_AH sub-capability entries */
	if (ah_cnt > 0) {
		ill_fill_ipsec_reset(ah_cnt, DL_CAPAB_IPSEC_AH, ah_len,
		    cap_ah, mp);
		ASSERT(mp->b_rptr + size >= mp->b_wptr);
	}

	/* Fill in DL_CAPAB_IPSEC_ESP sub-capability entries */
	if (esp_cnt > 0) {
		ill_fill_ipsec_reset(esp_cnt, DL_CAPAB_IPSEC_ESP, esp_len,
		    cap_esp, mp);
		ASSERT(mp->b_rptr + size >= mp->b_wptr);
	}

	/*
	 * At this point we've composed a bunch of sub-capabilities to be
	 * encapsulated in a DL_CAPABILITY_REQ and later sent downstream
	 * by the caller.  Upon receiving this reset message, the driver
	 * must stop inbound decryption (by destroying all inbound SAs)
	 * and let the corresponding packets come in encrypted.
	 */

	if (*sc_mp != NULL)
		linkb(*sc_mp, mp);
	else
		*sc_mp = mp;
}

static void
ill_capability_dispatch(ill_t *ill, mblk_t *mp, dl_capability_sub_t *subp,
    boolean_t encapsulated)
{
	boolean_t legacy = B_FALSE;

	/*
	 * If this DL_CAPABILITY_ACK came in as a response to our "reset"
	 * DL_CAPABILITY_REQ, ignore it during this cycle.  We've just
	 * instructed the driver to disable its advertised capabilities,
	 * so there's no point in accepting any response at this moment.
	 */
	if (ill->ill_capab_state == IDMS_UNKNOWN)
		return;

	/*
	 * Note that only the following two sub-capabilities may be
	 * considered as "legacy", since their original definitions
	 * do not incorporate the dl_mid_t module ID token, and hence
	 * may require the use of the wrapper sub-capability.
	 */
	switch (subp->dl_cap) {
	case DL_CAPAB_IPSEC_AH:
	case DL_CAPAB_IPSEC_ESP:
		legacy = B_TRUE;
		break;
	}

	/*
	 * For legacy sub-capabilities which don't incorporate a queue_t
	 * pointer in their structures, discard them if we detect that
	 * there are intermediate modules in between IP and the driver.
	 */
	if (!encapsulated && legacy && ill->ill_lmod_cnt > 1) {
		ip1dbg(("ill_capability_dispatch: unencapsulated capab type "
		    "%d discarded; %d module(s) present below IP\n",
		    subp->dl_cap, ill->ill_lmod_cnt));
		return;
	}

	switch (subp->dl_cap) {
	case DL_CAPAB_IPSEC_AH:
	case DL_CAPAB_IPSEC_ESP:
		ill_capability_ipsec_ack(ill, mp, subp);
		break;
	case DL_CAPAB_MDT:
		ill_capability_mdt_ack(ill, mp, subp);
		break;
	case DL_CAPAB_HCKSUM:
		ill_capability_hcksum_ack(ill, mp, subp);
		break;
	case DL_CAPAB_ZEROCOPY:
		ill_capability_zerocopy_ack(ill, mp, subp);
		break;
	case DL_CAPAB_POLL:
		if (!SOFT_RINGS_ENABLED())
			ill_capability_dls_ack(ill, mp, subp);
		break;
	case DL_CAPAB_SOFT_RING:
		if (SOFT_RINGS_ENABLED())
			ill_capability_dls_ack(ill, mp, subp);
		break;
	default:
		ip1dbg(("ill_capability_dispatch: unknown capab type %d\n",
		    subp->dl_cap));
	}
}

/*
 * As part of negotiating polling capability, the driver tells us
 * the default (or normal) blanking interval and packet threshold
 * (the receive timer fires if blanking interval is reached or
 * the packet threshold is reached).
 *
 * As part of manipulating the polling interval, we always use our
 * estimated interval (avg service time * number of packets queued
 * on the squeue) but we try to blank for a minimum of
 * rr_normal_blank_time * rr_max_blank_ratio. We disable the
 * packet threshold during this time. When we are not in polling mode
 * we set the blank interval typically lower, rr_normal_pkt_cnt *
 * rr_min_blank_ratio but up the packet cnt by a ratio of
 * rr_min_pkt_cnt_ratio so that we are still getting chains if
 * possible although for a shorter interval.
 */
#define	RR_MAX_BLANK_RATIO	20
#define	RR_MIN_BLANK_RATIO	10
#define	RR_MAX_PKT_CNT_RATIO	3
#define	RR_MIN_PKT_CNT_RATIO	3

/*
 * These can be tuned via /etc/system.
 */
int rr_max_blank_ratio = RR_MAX_BLANK_RATIO;
int rr_min_blank_ratio = RR_MIN_BLANK_RATIO;
int rr_max_pkt_cnt_ratio = RR_MAX_PKT_CNT_RATIO;
int rr_min_pkt_cnt_ratio = RR_MIN_PKT_CNT_RATIO;

static mac_resource_handle_t
ill_ring_add(void *arg, mac_resource_t *mrp)
{
	ill_t			*ill = (ill_t *)arg;
	mac_rx_fifo_t		*mrfp = (mac_rx_fifo_t *)mrp;
	ill_rx_ring_t		*rx_ring;
	int			ip_rx_index;

	ASSERT(mrp != NULL);
	if (mrp->mr_type != MAC_RX_FIFO) {
		return (NULL);
	}
	ASSERT(ill != NULL);
	ASSERT(ill->ill_dls_capab != NULL);

	mutex_enter(&ill->ill_lock);
	for (ip_rx_index = 0; ip_rx_index < ILL_MAX_RINGS; ip_rx_index++) {
		rx_ring = &ill->ill_dls_capab->ill_ring_tbl[ip_rx_index];
		ASSERT(rx_ring != NULL);

		if (rx_ring->rr_ring_state == ILL_RING_FREE) {
			time_t normal_blank_time =
			    mrfp->mrf_normal_blank_time;
			uint_t normal_pkt_cnt =
			    mrfp->mrf_normal_pkt_count;

			bzero(rx_ring, sizeof (ill_rx_ring_t));

			rx_ring->rr_blank = mrfp->mrf_blank;
			rx_ring->rr_handle = mrfp->mrf_arg;
			rx_ring->rr_ill = ill;
			rx_ring->rr_normal_blank_time = normal_blank_time;
			rx_ring->rr_normal_pkt_cnt = normal_pkt_cnt;

			rx_ring->rr_max_blank_time =
			    normal_blank_time * rr_max_blank_ratio;
			rx_ring->rr_min_blank_time =
			    normal_blank_time * rr_min_blank_ratio;
			rx_ring->rr_max_pkt_cnt =
			    normal_pkt_cnt * rr_max_pkt_cnt_ratio;
			rx_ring->rr_min_pkt_cnt =
			    normal_pkt_cnt * rr_min_pkt_cnt_ratio;

			rx_ring->rr_ring_state = ILL_RING_INUSE;
			mutex_exit(&ill->ill_lock);

			DTRACE_PROBE2(ill__ring__add, (void *), ill,
			    (int), ip_rx_index);
			return ((mac_resource_handle_t)rx_ring);
		}
	}

	/*
	 * We ran out of ILL_MAX_RINGS worth rx_ring structures. If
	 * we have devices which can overwhelm this limit, ILL_MAX_RING
	 * should be made configurable. Meanwhile it cause no panic because
	 * driver will pass ip_input a NULL handle which will make
	 * IP allocate the default squeue and Polling mode will not
	 * be used for this ring.
	 */
	cmn_err(CE_NOTE, "Reached maximum number of receiving rings (%d) "
	    "for %s\n", ILL_MAX_RINGS, ill->ill_name);

	mutex_exit(&ill->ill_lock);
	return (NULL);
}

static boolean_t
ill_capability_dls_init(ill_t *ill)
{
	ill_dls_capab_t	*ill_dls = ill->ill_dls_capab;
	conn_t 			*connp;
	size_t			sz;

	if (ill->ill_capabilities & ILL_CAPAB_SOFT_RING) {
		if (ill_dls == NULL) {
			cmn_err(CE_PANIC, "ill_capability_dls_init: "
			    "soft_ring enabled for ill=%s (%p) but data "
			    "structs uninitialized\n", ill->ill_name,
			    (void *)ill);
		}
		return (B_TRUE);
	} else if (ill->ill_capabilities & ILL_CAPAB_POLL) {
		if (ill_dls == NULL) {
			cmn_err(CE_PANIC, "ill_capability_dls_init: "
			    "polling enabled for ill=%s (%p) but data "
			    "structs uninitialized\n", ill->ill_name,
			(void *)ill);
		}
		return (B_TRUE);
	}

	if (ill_dls != NULL) {
		ill_rx_ring_t 	*rx_ring = ill_dls->ill_ring_tbl;
		/* Soft_Ring or polling is being re-enabled */

		connp = ill_dls->ill_unbind_conn;
		ASSERT(rx_ring != NULL);
		bzero((void *)ill_dls, sizeof (ill_dls_capab_t));
		bzero((void *)rx_ring,
		    sizeof (ill_rx_ring_t) * ILL_MAX_RINGS);
		ill_dls->ill_ring_tbl = rx_ring;
		ill_dls->ill_unbind_conn = connp;
		return (B_TRUE);
	}

	if ((connp = ipcl_conn_create(IPCL_TCPCONN, KM_NOSLEEP)) == NULL)
		return (B_FALSE);

	sz = sizeof (ill_dls_capab_t);
	sz += sizeof (ill_rx_ring_t) * ILL_MAX_RINGS;

	ill_dls = kmem_zalloc(sz, KM_NOSLEEP);
	if (ill_dls == NULL) {
		cmn_err(CE_WARN, "ill_capability_dls_init: could not "
		    "allocate dls_capab for %s (%p)\n", ill->ill_name,
		    (void *)ill);
		CONN_DEC_REF(connp);
		return (B_FALSE);
	}

	/* Allocate space to hold ring table */
	ill_dls->ill_ring_tbl = (ill_rx_ring_t *)&ill_dls[1];
	ill->ill_dls_capab = ill_dls;
	ill_dls->ill_unbind_conn = connp;
	return (B_TRUE);
}

/*
 * ill_capability_dls_disable: disable soft_ring and/or polling
 * capability. Since any of the rings might already be in use, need
 * to call ipsq_clean_all() which gets behind the squeue to disable
 * direct calls if necessary.
 */
static void
ill_capability_dls_disable(ill_t *ill)
{
	ill_dls_capab_t	*ill_dls = ill->ill_dls_capab;

	if (ill->ill_capabilities & ILL_CAPAB_DLS) {
		ipsq_clean_all(ill);
		ill_dls->ill_tx = NULL;
		ill_dls->ill_tx_handle = NULL;
		ill_dls->ill_dls_change_status = NULL;
		ill_dls->ill_dls_bind = NULL;
		ill_dls->ill_dls_unbind = NULL;
	}

	ASSERT(!(ill->ill_capabilities & ILL_CAPAB_DLS));
}

static void
ill_capability_dls_capable(ill_t *ill, dl_capab_dls_t *idls,
    dl_capability_sub_t *isub)
{
	uint_t			size;
	uchar_t			*rptr;
	dl_capab_dls_t	dls, *odls;
	ill_dls_capab_t	*ill_dls;
	mblk_t			*nmp = NULL;
	dl_capability_req_t	*ocap;
	uint_t			sub_dl_cap = isub->dl_cap;

	if (!ill_capability_dls_init(ill))
		return;
	ill_dls = ill->ill_dls_capab;

	/* Copy locally to get the members aligned */
	bcopy((void *)idls, (void *)&dls,
	    sizeof (dl_capab_dls_t));

	/* Get the tx function and handle from dld */
	ill_dls->ill_tx = (ip_dld_tx_t)dls.dls_tx;
	ill_dls->ill_tx_handle = (void *)dls.dls_tx_handle;

	if (sub_dl_cap == DL_CAPAB_SOFT_RING) {
		ill_dls->ill_dls_change_status =
		    (ip_dls_chg_soft_ring_t)dls.dls_ring_change_status;
		ill_dls->ill_dls_bind = (ip_dls_bind_t)dls.dls_ring_bind;
		ill_dls->ill_dls_unbind =
		    (ip_dls_unbind_t)dls.dls_ring_unbind;
		ill_dls->ill_dls_soft_ring_cnt = ip_soft_rings_cnt;
	}

	size = sizeof (dl_capability_req_t) + sizeof (dl_capability_sub_t) +
	    isub->dl_length;

	if ((nmp = ip_dlpi_alloc(size, DL_CAPABILITY_REQ)) == NULL) {
		cmn_err(CE_WARN, "ill_capability_dls_capable: could "
		    "not allocate memory for CAPAB_REQ for %s (%p)\n",
		    ill->ill_name, (void *)ill);
		return;
	}

	/* initialize dl_capability_req_t */
	rptr = nmp->b_rptr;
	ocap = (dl_capability_req_t *)rptr;
	ocap->dl_sub_offset = sizeof (dl_capability_req_t);
	ocap->dl_sub_length = sizeof (dl_capability_sub_t) + isub->dl_length;
	rptr += sizeof (dl_capability_req_t);

	/* initialize dl_capability_sub_t */
	bcopy(isub, rptr, sizeof (*isub));
	rptr += sizeof (*isub);

	odls = (dl_capab_dls_t *)rptr;
	rptr += sizeof (dl_capab_dls_t);

	/* initialize dl_capab_dls_t to be sent down */
	dls.dls_rx_handle = (uintptr_t)ill;
	dls.dls_rx = (uintptr_t)ip_input;
	dls.dls_ring_add = (uintptr_t)ill_ring_add;

	if (sub_dl_cap == DL_CAPAB_SOFT_RING) {
		dls.dls_ring_cnt = ip_soft_rings_cnt;
		dls.dls_ring_assign = (uintptr_t)ip_soft_ring_assignment;
		dls.dls_flags = SOFT_RING_ENABLE;
	} else {
		dls.dls_flags = POLL_ENABLE;
		ip1dbg(("ill_capability_dls_capable: asking interface %s "
		    "to enable polling\n", ill->ill_name));
	}
	bcopy((void *)&dls, (void *)odls,
	    sizeof (dl_capab_dls_t));
	ASSERT(nmp->b_wptr == (nmp->b_rptr + size));
	/*
	 * nmp points to a DL_CAPABILITY_REQ message to
	 * enable either soft_ring or polling
	 */
	ill_dlpi_send(ill, nmp);
}

static void
ill_capability_dls_reset(ill_t *ill, mblk_t **sc_mp)
{
	mblk_t *mp;
	dl_capab_dls_t *idls;
	dl_capability_sub_t *dl_subcap;
	int size;

	if (!(ill->ill_capabilities & ILL_CAPAB_DLS))
		return;

	ASSERT(ill->ill_dls_capab != NULL);

	size = sizeof (*dl_subcap) + sizeof (*idls);

	mp = allocb(size, BPRI_HI);
	if (mp == NULL) {
		ip1dbg(("ill_capability_dls_reset: unable to allocate "
		    "request to disable soft_ring\n"));
		return;
	}

	mp->b_wptr = mp->b_rptr + size;

	dl_subcap = (dl_capability_sub_t *)mp->b_rptr;
	dl_subcap->dl_length = sizeof (*idls);
	if (ill->ill_capabilities & ILL_CAPAB_SOFT_RING)
		dl_subcap->dl_cap = DL_CAPAB_SOFT_RING;
	else
		dl_subcap->dl_cap = DL_CAPAB_POLL;

	idls = (dl_capab_dls_t *)(dl_subcap + 1);
	if (ill->ill_capabilities & ILL_CAPAB_SOFT_RING)
		idls->dls_flags = SOFT_RING_DISABLE;
	else
		idls->dls_flags = POLL_DISABLE;

	if (*sc_mp != NULL)
		linkb(*sc_mp, mp);
	else
		*sc_mp = mp;
}

/*
 * Process a soft_ring/poll capability negotiation ack received
 * from a DLS Provider.isub must point to the sub-capability
 * (DL_CAPAB_SOFT_RING/DL_CAPAB_POLL) of a DL_CAPABILITY_ACK message.
 */
static void
ill_capability_dls_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *isub)
{
	dl_capab_dls_t		*idls;
	uint_t			sub_dl_cap = isub->dl_cap;
	uint8_t			*capend;

	ASSERT(sub_dl_cap == DL_CAPAB_SOFT_RING ||
	    sub_dl_cap == DL_CAPAB_POLL);

	if (ill->ill_isv6)
		return;

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */
	capend = (uint8_t *)(isub + 1) + isub->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_dls_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	/*
	 * There are two types of acks we process here:
	 * 1. acks in reply to a (first form) generic capability req
	 *    (dls_flag will be set to SOFT_RING_CAPABLE or POLL_CAPABLE)
	 * 2. acks in reply to a SOFT_RING_ENABLE or POLL_ENABLE
	 *    capability req.
	 */
	idls = (dl_capab_dls_t *)(isub + 1);

	if (!dlcapabcheckqid(&idls->dls_mid, ill->ill_lmod_rq)) {
		ip1dbg(("ill_capability_dls_ack: mid token for dls "
		    "capability isn't as expected; pass-thru "
		    "module(s) detected, discarding capability\n"));
		if (ill->ill_capabilities & ILL_CAPAB_DLS) {
			/*
			 * This is a capability renegotitation case.
			 * The interface better be unusable at this
			 * point other wise bad things will happen
			 * if we disable direct calls on a running
			 * and up interface.
			 */
			ill_capability_dls_disable(ill);
		}
		return;
	}

	switch (idls->dls_flags) {
	default:
		/* Disable if unknown flag */
	case SOFT_RING_DISABLE:
	case POLL_DISABLE:
		ill_capability_dls_disable(ill);
		break;
	case SOFT_RING_CAPABLE:
	case POLL_CAPABLE:
		/*
		 * If the capability was already enabled, its safe
		 * to disable it first to get rid of stale information
		 * and then start enabling it again.
		 */
		ill_capability_dls_disable(ill);
		ill_capability_dls_capable(ill, idls, isub);
		break;
	case SOFT_RING_ENABLE:
	case POLL_ENABLE:
		mutex_enter(&ill->ill_lock);
		if (sub_dl_cap == DL_CAPAB_SOFT_RING &&
		    !(ill->ill_capabilities & ILL_CAPAB_SOFT_RING)) {
			ASSERT(ill->ill_dls_capab != NULL);
			ill->ill_capabilities |= ILL_CAPAB_SOFT_RING;
		}
		if (sub_dl_cap == DL_CAPAB_POLL &&
		    !(ill->ill_capabilities & ILL_CAPAB_POLL)) {
			ASSERT(ill->ill_dls_capab != NULL);
			ill->ill_capabilities |= ILL_CAPAB_POLL;
			ip1dbg(("ill_capability_dls_ack: interface %s "
			    "has enabled polling\n", ill->ill_name));
		}
		mutex_exit(&ill->ill_lock);
		break;
	}
}

/*
 * Process a hardware checksum offload capability negotiation ack received
 * from a DLS Provider.isub must point to the sub-capability (DL_CAPAB_HCKSUM)
 * of a DL_CAPABILITY_ACK message.
 */
static void
ill_capability_hcksum_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *isub)
{
	dl_capability_req_t	*ocap;
	dl_capab_hcksum_t	*ihck, *ohck;
	ill_hcksum_capab_t	**ill_hcksum;
	mblk_t			*nmp = NULL;
	uint_t			sub_dl_cap = isub->dl_cap;
	uint8_t			*capend;

	ASSERT(sub_dl_cap == DL_CAPAB_HCKSUM);

	ill_hcksum = (ill_hcksum_capab_t **)&ill->ill_hcksum_capab;

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */
	capend = (uint8_t *)(isub + 1) + isub->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_hcksum_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	/*
	 * There are two types of acks we process here:
	 * 1. acks in reply to a (first form) generic capability req
	 *    (no ENABLE flag set)
	 * 2. acks in reply to a ENABLE capability req.
	 *    (ENABLE flag set)
	 */
	ihck = (dl_capab_hcksum_t *)(isub + 1);

	if (ihck->hcksum_version != HCKSUM_VERSION_1) {
		cmn_err(CE_CONT, "ill_capability_hcksum_ack: "
		    "unsupported hardware checksum "
		    "sub-capability (version %d, expected %d)",
		    ihck->hcksum_version, HCKSUM_VERSION_1);
		return;
	}

	if (!dlcapabcheckqid(&ihck->hcksum_mid, ill->ill_lmod_rq)) {
		ip1dbg(("ill_capability_hcksum_ack: mid token for hardware "
		    "checksum capability isn't as expected; pass-thru "
		    "module(s) detected, discarding capability\n"));
		return;
	}

#define	CURR_HCKSUM_CAPAB				\
	(HCKSUM_INET_PARTIAL | HCKSUM_INET_FULL_V4 |	\
	HCKSUM_INET_FULL_V6 | HCKSUM_IPHDRCKSUM)

	if ((ihck->hcksum_txflags & HCKSUM_ENABLE) &&
	    (ihck->hcksum_txflags & CURR_HCKSUM_CAPAB)) {
		/* do ENABLE processing */
		if (*ill_hcksum == NULL) {
			*ill_hcksum = kmem_zalloc(sizeof (ill_hcksum_capab_t),
			    KM_NOSLEEP);

			if (*ill_hcksum == NULL) {
				cmn_err(CE_WARN, "ill_capability_hcksum_ack: "
				    "could not enable hcksum version %d "
				    "for %s (ENOMEM)\n", HCKSUM_CURRENT_VERSION,
				    ill->ill_name);
				return;
			}
		}

		(*ill_hcksum)->ill_hcksum_version = ihck->hcksum_version;
		(*ill_hcksum)->ill_hcksum_txflags = ihck->hcksum_txflags;
		ill->ill_capabilities |= ILL_CAPAB_HCKSUM;
		ip1dbg(("ill_capability_hcksum_ack: interface %s "
		    "has enabled hardware checksumming\n ",
		    ill->ill_name));
	} else if (ihck->hcksum_txflags & CURR_HCKSUM_CAPAB) {
		/*
		 * Enabling hardware checksum offload
		 * Currently IP supports {TCP,UDP}/IPv4
		 * partial and full cksum offload and
		 * IPv4 header checksum offload.
		 * Allocate new mblk which will
		 * contain a new capability request
		 * to enable hardware checksum offload.
		 */
		uint_t	size;
		uchar_t	*rptr;

		size = sizeof (dl_capability_req_t) +
		    sizeof (dl_capability_sub_t) + isub->dl_length;

		if ((nmp = ip_dlpi_alloc(size, DL_CAPABILITY_REQ)) == NULL) {
			cmn_err(CE_WARN, "ill_capability_hcksum_ack: "
			    "could not enable hardware cksum for %s (ENOMEM)\n",
			    ill->ill_name);
			return;
		}

		rptr = nmp->b_rptr;
		/* initialize dl_capability_req_t */
		ocap = (dl_capability_req_t *)nmp->b_rptr;
		ocap->dl_sub_offset =
		    sizeof (dl_capability_req_t);
		ocap->dl_sub_length =
		    sizeof (dl_capability_sub_t) +
		    isub->dl_length;
		nmp->b_rptr += sizeof (dl_capability_req_t);

		/* initialize dl_capability_sub_t */
		bcopy(isub, nmp->b_rptr, sizeof (*isub));
		nmp->b_rptr += sizeof (*isub);

		/* initialize dl_capab_hcksum_t */
		ohck = (dl_capab_hcksum_t *)nmp->b_rptr;
		bcopy(ihck, ohck, sizeof (*ihck));

		nmp->b_rptr = rptr;
		ASSERT(nmp->b_wptr == (nmp->b_rptr + size));

		/* Set ENABLE flag */
		ohck->hcksum_txflags &= CURR_HCKSUM_CAPAB;
		ohck->hcksum_txflags |= HCKSUM_ENABLE;

		/*
		 * nmp points to a DL_CAPABILITY_REQ message to enable
		 * hardware checksum acceleration.
		 */
		ill_dlpi_send(ill, nmp);
	} else {
		ip1dbg(("ill_capability_hcksum_ack: interface %s has "
		    "advertised %x hardware checksum capability flags\n",
		    ill->ill_name, ihck->hcksum_txflags));
	}
}

static void
ill_capability_hcksum_reset(ill_t *ill, mblk_t **sc_mp)
{
	mblk_t *mp;
	dl_capab_hcksum_t *hck_subcap;
	dl_capability_sub_t *dl_subcap;
	int size;

	if (!ILL_HCKSUM_CAPABLE(ill))
		return;

	ASSERT(ill->ill_hcksum_capab != NULL);
	/*
	 * Clear the capability flag for hardware checksum offload but
	 * retain the ill_hcksum_capab structure since it's possible that
	 * another thread is still referring to it.  The structure only
	 * gets deallocated when we destroy the ill.
	 */
	ill->ill_capabilities &= ~ILL_CAPAB_HCKSUM;

	size = sizeof (*dl_subcap) + sizeof (*hck_subcap);

	mp = allocb(size, BPRI_HI);
	if (mp == NULL) {
		ip1dbg(("ill_capability_hcksum_reset: unable to allocate "
		    "request to disable hardware checksum offload\n"));
		return;
	}

	mp->b_wptr = mp->b_rptr + size;

	dl_subcap = (dl_capability_sub_t *)mp->b_rptr;
	dl_subcap->dl_cap = DL_CAPAB_HCKSUM;
	dl_subcap->dl_length = sizeof (*hck_subcap);

	hck_subcap = (dl_capab_hcksum_t *)(dl_subcap + 1);
	hck_subcap->hcksum_version = ill->ill_hcksum_capab->ill_hcksum_version;
	hck_subcap->hcksum_txflags = 0;

	if (*sc_mp != NULL)
		linkb(*sc_mp, mp);
	else
		*sc_mp = mp;
}

static void
ill_capability_zerocopy_ack(ill_t *ill, mblk_t *mp, dl_capability_sub_t *isub)
{
	mblk_t *nmp = NULL;
	dl_capability_req_t *oc;
	dl_capab_zerocopy_t *zc_ic, *zc_oc;
	ill_zerocopy_capab_t **ill_zerocopy_capab;
	uint_t sub_dl_cap = isub->dl_cap;
	uint8_t *capend;

	ASSERT(sub_dl_cap == DL_CAPAB_ZEROCOPY);

	ill_zerocopy_capab = (ill_zerocopy_capab_t **)&ill->ill_zerocopy_capab;

	/*
	 * Note: range checks here are not absolutely sufficient to
	 * make us robust against malformed messages sent by drivers;
	 * this is in keeping with the rest of IP's dlpi handling.
	 * (Remember, it's coming from something else in the kernel
	 * address space)
	 */
	capend = (uint8_t *)(isub + 1) + isub->dl_length;
	if (capend > mp->b_wptr) {
		cmn_err(CE_WARN, "ill_capability_zerocopy_ack: "
		    "malformed sub-capability too long for mblk");
		return;
	}

	zc_ic = (dl_capab_zerocopy_t *)(isub + 1);
	if (zc_ic->zerocopy_version != ZEROCOPY_VERSION_1) {
		cmn_err(CE_CONT, "ill_capability_zerocopy_ack: "
		    "unsupported ZEROCOPY sub-capability (version %d, "
		    "expected %d)", zc_ic->zerocopy_version,
		    ZEROCOPY_VERSION_1);
		return;
	}

	if (!dlcapabcheckqid(&zc_ic->zerocopy_mid, ill->ill_lmod_rq)) {
		ip1dbg(("ill_capability_zerocopy_ack: mid token for zerocopy "
		    "capability isn't as expected; pass-thru module(s) "
		    "detected, discarding capability\n"));
		return;
	}

	if ((zc_ic->zerocopy_flags & DL_CAPAB_VMSAFE_MEM) != 0) {
		if (*ill_zerocopy_capab == NULL) {
			*ill_zerocopy_capab =
			    kmem_zalloc(sizeof (ill_zerocopy_capab_t),
			    KM_NOSLEEP);

			if (*ill_zerocopy_capab == NULL) {
				cmn_err(CE_WARN, "ill_capability_zerocopy_ack: "
				    "could not enable Zero-copy version %d "
				    "for %s (ENOMEM)\n", ZEROCOPY_VERSION_1,
				    ill->ill_name);
				return;
			}
		}

		ip1dbg(("ill_capability_zerocopy_ack: interface %s "
		    "supports Zero-copy version %d\n", ill->ill_name,
		    ZEROCOPY_VERSION_1));

		(*ill_zerocopy_capab)->ill_zerocopy_version =
		    zc_ic->zerocopy_version;
		(*ill_zerocopy_capab)->ill_zerocopy_flags =
		    zc_ic->zerocopy_flags;

		ill->ill_capabilities |= ILL_CAPAB_ZEROCOPY;
	} else {
		uint_t size;
		uchar_t *rptr;

		size = sizeof (dl_capability_req_t) +
		    sizeof (dl_capability_sub_t) +
		    sizeof (dl_capab_zerocopy_t);

		if ((nmp = ip_dlpi_alloc(size, DL_CAPABILITY_REQ)) == NULL) {
			cmn_err(CE_WARN, "ill_capability_zerocopy_ack: "
			    "could not enable zerocopy for %s (ENOMEM)\n",
			    ill->ill_name);
			return;
		}

		rptr = nmp->b_rptr;
		/* initialize dl_capability_req_t */
		oc = (dl_capability_req_t *)rptr;
		oc->dl_sub_offset = sizeof (dl_capability_req_t);
		oc->dl_sub_length = sizeof (dl_capability_sub_t) +
		    sizeof (dl_capab_zerocopy_t);
		rptr += sizeof (dl_capability_req_t);

		/* initialize dl_capability_sub_t */
		bcopy(isub, rptr, sizeof (*isub));
		rptr += sizeof (*isub);

		/* initialize dl_capab_zerocopy_t */
		zc_oc = (dl_capab_zerocopy_t *)rptr;
		*zc_oc = *zc_ic;

		ip1dbg(("ill_capability_zerocopy_ack: asking interface %s "
		    "to enable zero-copy version %d\n", ill->ill_name,
		    ZEROCOPY_VERSION_1));

		/* set VMSAFE_MEM flag */
		zc_oc->zerocopy_flags |= DL_CAPAB_VMSAFE_MEM;

		/* nmp points to a DL_CAPABILITY_REQ message to enable zcopy */
		ill_dlpi_send(ill, nmp);
	}
}

static void
ill_capability_zerocopy_reset(ill_t *ill, mblk_t **sc_mp)
{
	mblk_t *mp;
	dl_capab_zerocopy_t *zerocopy_subcap;
	dl_capability_sub_t *dl_subcap;
	int size;

	if (!(ill->ill_capabilities & ILL_CAPAB_ZEROCOPY))
		return;

	ASSERT(ill->ill_zerocopy_capab != NULL);
	/*
	 * Clear the capability flag for Zero-copy but retain the
	 * ill_zerocopy_capab structure since it's possible that another
	 * thread is still referring to it.  The structure only gets
	 * deallocated when we destroy the ill.
	 */
	ill->ill_capabilities &= ~ILL_CAPAB_ZEROCOPY;

	size = sizeof (*dl_subcap) + sizeof (*zerocopy_subcap);

	mp = allocb(size, BPRI_HI);
	if (mp == NULL) {
		ip1dbg(("ill_capability_zerocopy_reset: unable to allocate "
		    "request to disable Zero-copy\n"));
		return;
	}

	mp->b_wptr = mp->b_rptr + size;

	dl_subcap = (dl_capability_sub_t *)mp->b_rptr;
	dl_subcap->dl_cap = DL_CAPAB_ZEROCOPY;
	dl_subcap->dl_length = sizeof (*zerocopy_subcap);

	zerocopy_subcap = (dl_capab_zerocopy_t *)(dl_subcap + 1);
	zerocopy_subcap->zerocopy_version =
	    ill->ill_zerocopy_capab->ill_zerocopy_version;
	zerocopy_subcap->zerocopy_flags = 0;

	if (*sc_mp != NULL)
		linkb(*sc_mp, mp);
	else
		*sc_mp = mp;
}

/*
 * Consume a new-style hardware capabilities negotiation ack.
 * Called from ip_rput_dlpi_writer().
 */
void
ill_capability_ack(ill_t *ill, mblk_t *mp)
{
	dl_capability_ack_t *capp;
	dl_capability_sub_t *subp, *endp;

	if (ill->ill_capab_state == IDMS_INPROGRESS)
		ill->ill_capab_state = IDMS_OK;

	capp = (dl_capability_ack_t *)mp->b_rptr;

	if (capp->dl_sub_length == 0)
		/* no new-style capabilities */
		return;

	/* make sure the driver supplied correct dl_sub_length */
	if ((sizeof (*capp) + capp->dl_sub_length) > MBLKL(mp)) {
		ip0dbg(("ill_capability_ack: bad DL_CAPABILITY_ACK, "
		    "invalid dl_sub_length (%d)\n", capp->dl_sub_length));
		return;
	}

#define	SC(base, offset) (dl_capability_sub_t *)(((uchar_t *)(base))+(offset))
	/*
	 * There are sub-capabilities. Process the ones we know about.
	 * Loop until we don't have room for another sub-cap header..
	 */
	for (subp = SC(capp, capp->dl_sub_offset),
	    endp = SC(subp, capp->dl_sub_length - sizeof (*subp));
	    subp <= endp;
	    subp = SC(subp, sizeof (dl_capability_sub_t) + subp->dl_length)) {

		switch (subp->dl_cap) {
		case DL_CAPAB_ID_WRAPPER:
			ill_capability_id_ack(ill, mp, subp);
			break;
		default:
			ill_capability_dispatch(ill, mp, subp, B_FALSE);
			break;
		}
	}
#undef SC
}

/*
 * This routine is called to scan the fragmentation reassembly table for
 * the specified ILL for any packets that are starting to smell.
 * dead_interval is the maximum time in seconds that will be tolerated.  It
 * will either be the value specified in ip_g_frag_timeout, or zero if the
 * ILL is shutting down and it is time to blow everything off.
 *
 * It returns the number of seconds (as a time_t) that the next frag timer
 * should be scheduled for, 0 meaning that the timer doesn't need to be
 * re-started.  Note that the method of calculating next_timeout isn't
 * entirely accurate since time will flow between the time we grab
 * current_time and the time we schedule the next timeout.  This isn't a
 * big problem since this is the timer for sending an ICMP reassembly time
 * exceeded messages, and it doesn't have to be exactly accurate.
 *
 * This function is
 * sometimes called as writer, although this is not required.
 */
time_t
ill_frag_timeout(ill_t *ill, time_t dead_interval)
{
	ipfb_t	*ipfb;
	ipfb_t	*endp;
	ipf_t	*ipf;
	ipf_t	*ipfnext;
	mblk_t	*mp;
	time_t	current_time = gethrestime_sec();
	time_t	next_timeout = 0;
	uint32_t	hdr_length;
	mblk_t	*send_icmp_head;
	mblk_t	*send_icmp_head_v6;

	ipfb = ill->ill_frag_hash_tbl;
	if (ipfb == NULL)
		return (B_FALSE);
	endp = &ipfb[ILL_FRAG_HASH_TBL_COUNT];
	/* Walk the frag hash table. */
	for (; ipfb < endp; ipfb++) {
		send_icmp_head = NULL;
		send_icmp_head_v6 = NULL;
		mutex_enter(&ipfb->ipfb_lock);
		while ((ipf = ipfb->ipfb_ipf) != 0) {
			time_t frag_time = current_time - ipf->ipf_timestamp;
			time_t frag_timeout;

			if (frag_time < dead_interval) {
				/*
				 * There are some outstanding fragments
				 * that will timeout later.  Make note of
				 * the time so that we can reschedule the
				 * next timeout appropriately.
				 */
				frag_timeout = dead_interval - frag_time;
				if (next_timeout == 0 ||
				    frag_timeout < next_timeout) {
					next_timeout = frag_timeout;
				}
				break;
			}
			/* Time's up.  Get it out of here. */
			hdr_length = ipf->ipf_nf_hdr_len;
			ipfnext = ipf->ipf_hash_next;
			if (ipfnext)
				ipfnext->ipf_ptphn = ipf->ipf_ptphn;
			*ipf->ipf_ptphn = ipfnext;
			mp = ipf->ipf_mp->b_cont;
			for (; mp; mp = mp->b_cont) {
				/* Extra points for neatness. */
				IP_REASS_SET_START(mp, 0);
				IP_REASS_SET_END(mp, 0);
			}
			mp = ipf->ipf_mp->b_cont;
			ill->ill_frag_count -= ipf->ipf_count;
			ASSERT(ipfb->ipfb_count >= ipf->ipf_count);
			ipfb->ipfb_count -= ipf->ipf_count;
			ASSERT(ipfb->ipfb_frag_pkts > 0);
			ipfb->ipfb_frag_pkts--;
			/*
			 * We do not send any icmp message from here because
			 * we currently are holding the ipfb_lock for this
			 * hash chain. If we try and send any icmp messages
			 * from here we may end up via a put back into ip
			 * trying to get the same lock, causing a recursive
			 * mutex panic. Instead we build a list and send all
			 * the icmp messages after we have dropped the lock.
			 */
			if (ill->ill_isv6) {
				BUMP_MIB(ill->ill_ip6_mib, ipv6ReasmFails);
				if (hdr_length != 0) {
					mp->b_next = send_icmp_head_v6;
					send_icmp_head_v6 = mp;
				} else {
					freemsg(mp);
				}
			} else {
				BUMP_MIB(&ip_mib, ipReasmFails);
				if (hdr_length != 0) {
					mp->b_next = send_icmp_head;
					send_icmp_head = mp;
				} else {
					freemsg(mp);
				}
			}
			freeb(ipf->ipf_mp);
		}
		mutex_exit(&ipfb->ipfb_lock);
		/*
		 * Now need to send any icmp messages that we delayed from
		 * above.
		 */
		while (send_icmp_head_v6 != NULL) {
			mp = send_icmp_head_v6;
			send_icmp_head_v6 = send_icmp_head_v6->b_next;
			mp->b_next = NULL;
			icmp_time_exceeded_v6(ill->ill_wq, mp,
			    ICMP_REASSEMBLY_TIME_EXCEEDED, B_FALSE, B_FALSE);
		}
		while (send_icmp_head != NULL) {
			mp = send_icmp_head;
			send_icmp_head = send_icmp_head->b_next;
			mp->b_next = NULL;
			icmp_time_exceeded(ill->ill_wq, mp,
			    ICMP_REASSEMBLY_TIME_EXCEEDED);
		}
	}
	/*
	 * A non-dying ILL will use the return value to decide whether to
	 * restart the frag timer, and for how long.
	 */
	return (next_timeout);
}

/*
 * This routine is called when the approximate count of mblk memory used
 * for the specified ILL has exceeded max_count.
 */
void
ill_frag_prune(ill_t *ill, uint_t max_count)
{
	ipfb_t	*ipfb;
	ipf_t	*ipf;
	size_t	count;

	/*
	 * If we are here within ip_min_frag_prune_time msecs remove
	 * ill_frag_free_num_pkts oldest packets from each bucket and increment
	 * ill_frag_free_num_pkts.
	 */
	mutex_enter(&ill->ill_lock);
	if (TICK_TO_MSEC(lbolt - ill->ill_last_frag_clean_time) <=
	    (ip_min_frag_prune_time != 0 ?
	    ip_min_frag_prune_time : msec_per_tick)) {

		ill->ill_frag_free_num_pkts++;

	} else {
		ill->ill_frag_free_num_pkts = 0;
	}
	ill->ill_last_frag_clean_time = lbolt;
	mutex_exit(&ill->ill_lock);

	/*
	 * free ill_frag_free_num_pkts oldest packets from each bucket.
	 */
	if (ill->ill_frag_free_num_pkts != 0) {
		int ix;

		for (ix = 0; ix < ILL_FRAG_HASH_TBL_COUNT; ix++) {
			ipfb = &ill->ill_frag_hash_tbl[ix];
			mutex_enter(&ipfb->ipfb_lock);
			if (ipfb->ipfb_ipf != NULL) {
				ill_frag_free_pkts(ill, ipfb, ipfb->ipfb_ipf,
				    ill->ill_frag_free_num_pkts);
			}
			mutex_exit(&ipfb->ipfb_lock);
		}
	}
	/*
	 * While the reassembly list for this ILL is too big, prune a fragment
	 * queue by age, oldest first.  Note that the per ILL count is
	 * approximate, while the per frag hash bucket counts are accurate.
	 */
	while (ill->ill_frag_count > max_count) {
		int	ix;
		ipfb_t	*oipfb = NULL;
		uint_t	oldest = UINT_MAX;

		count = 0;
		for (ix = 0; ix < ILL_FRAG_HASH_TBL_COUNT; ix++) {
			ipfb = &ill->ill_frag_hash_tbl[ix];
			mutex_enter(&ipfb->ipfb_lock);
			ipf = ipfb->ipfb_ipf;
			if (ipf != NULL && ipf->ipf_gen < oldest) {
				oldest = ipf->ipf_gen;
				oipfb = ipfb;
			}
			count += ipfb->ipfb_count;
			mutex_exit(&ipfb->ipfb_lock);
		}
		/* Refresh the per ILL count */
		ill->ill_frag_count = count;
		if (oipfb == NULL) {
			ill->ill_frag_count = 0;
			break;
		}
		if (count <= max_count)
			return;	/* Somebody beat us to it, nothing to do */
		mutex_enter(&oipfb->ipfb_lock);
		ipf = oipfb->ipfb_ipf;
		if (ipf != NULL) {
			ill_frag_free_pkts(ill, oipfb, ipf, 1);
		}
		mutex_exit(&oipfb->ipfb_lock);
	}
}

/*
 * free 'free_cnt' fragmented packets starting at ipf.
 */
void
ill_frag_free_pkts(ill_t *ill, ipfb_t *ipfb, ipf_t *ipf, int free_cnt)
{
	size_t	count;
	mblk_t	*mp;
	mblk_t	*tmp;
	ipf_t **ipfp = ipf->ipf_ptphn;

	ASSERT(MUTEX_HELD(&ipfb->ipfb_lock));
	ASSERT(ipfp != NULL);
	ASSERT(ipf != NULL);

	while (ipf != NULL && free_cnt-- > 0) {
		count = ipf->ipf_count;
		mp = ipf->ipf_mp;
		ipf = ipf->ipf_hash_next;
		for (tmp = mp; tmp; tmp = tmp->b_cont) {
			IP_REASS_SET_START(tmp, 0);
			IP_REASS_SET_END(tmp, 0);
		}
		ill->ill_frag_count -= count;
		ASSERT(ipfb->ipfb_count >= count);
		ipfb->ipfb_count -= count;
		ASSERT(ipfb->ipfb_frag_pkts > 0);
		ipfb->ipfb_frag_pkts--;
		freemsg(mp);
		BUMP_MIB(&ip_mib, ipReasmFails);
	}

	if (ipf)
		ipf->ipf_ptphn = ipfp;
	ipfp[0] = ipf;
}

#define	ND_FORWARD_WARNING	"The <if>:ip*_forwarding ndd variables are " \
	"obsolete and may be removed in a future release of Solaris.  Use " \
	"ifconfig(1M) to manipulate the forwarding status of an interface."

/*
 * For obsolete per-interface forwarding configuration;
 * called in response to ND_GET.
 */
/* ARGSUSED */
static int
nd_ill_forward_get(queue_t *q, mblk_t *mp, caddr_t cp, cred_t *ioc_cr)
{
	ill_t *ill = (ill_t *)cp;

	cmn_err(CE_WARN, ND_FORWARD_WARNING);

	(void) mi_mpprintf(mp, "%d", (ill->ill_flags & ILLF_ROUTER) != 0);
	return (0);
}

/*
 * For obsolete per-interface forwarding configuration;
 * called in response to ND_SET.
 */
/* ARGSUSED */
static int
nd_ill_forward_set(queue_t *q, mblk_t *mp, char *valuestr, caddr_t cp,
    cred_t *ioc_cr)
{
	long value;
	int retval;

	cmn_err(CE_WARN, ND_FORWARD_WARNING);

	if (ddi_strtol(valuestr, NULL, 10, &value) != 0 ||
	    value < 0 || value > 1) {
		return (EINVAL);
	}

	rw_enter(&ill_g_lock, RW_READER);
	retval = ill_forward_set(q, mp, (value != 0), cp);
	rw_exit(&ill_g_lock);
	return (retval);
}

/*
 * Set an ill's ILLF_ROUTER flag appropriately.  If the ill is part of an
 * IPMP group, make sure all ill's in the group adopt the new policy.  Send
 * up RTS_IFINFO routing socket messages for each interface whose flags we
 * change.
 */
/* ARGSUSED */
int
ill_forward_set(queue_t *q, mblk_t *mp, boolean_t enable, caddr_t cp)
{
	ill_t *ill = (ill_t *)cp;
	ill_group_t *illgrp;

	ASSERT(IAM_WRITER_ILL(ill) || RW_READ_HELD(&ill_g_lock));

	if ((enable && (ill->ill_flags & ILLF_ROUTER)) ||
	    (!enable && !(ill->ill_flags & ILLF_ROUTER)) ||
	    (ill->ill_phyint->phyint_flags & PHYI_LOOPBACK))
		return (EINVAL);

	/*
	 * If the ill is in an IPMP group, set the forwarding policy on all
	 * members of the group to the same value.
	 */
	illgrp = ill->ill_group;
	if (illgrp != NULL) {
		ill_t *tmp_ill;

		for (tmp_ill = illgrp->illgrp_ill; tmp_ill != NULL;
		    tmp_ill = tmp_ill->ill_group_next) {
			ip1dbg(("ill_forward_set: %s %s forwarding on %s",
			    (enable ? "Enabling" : "Disabling"),
			    (tmp_ill->ill_isv6 ? "IPv6" : "IPv4"),
			    tmp_ill->ill_name));
			mutex_enter(&tmp_ill->ill_lock);
			if (enable)
				tmp_ill->ill_flags |= ILLF_ROUTER;
			else
				tmp_ill->ill_flags &= ~ILLF_ROUTER;
			mutex_exit(&tmp_ill->ill_lock);
			if (tmp_ill->ill_isv6)
				ill_set_nce_router_flags(tmp_ill, enable);
			/* Notify routing socket listeners of this change. */
			ip_rts_ifmsg(tmp_ill->ill_ipif);
		}
	} else {
		ip1dbg(("ill_forward_set: %s %s forwarding on %s",
		    (enable ? "Enabling" : "Disabling"),
		    (ill->ill_isv6 ? "IPv6" : "IPv4"), ill->ill_name));
		mutex_enter(&ill->ill_lock);
		if (enable)
			ill->ill_flags |= ILLF_ROUTER;
		else
			ill->ill_flags &= ~ILLF_ROUTER;
		mutex_exit(&ill->ill_lock);
		if (ill->ill_isv6)
			ill_set_nce_router_flags(ill, enable);
		/* Notify routing socket listeners of this change. */
		ip_rts_ifmsg(ill->ill_ipif);
	}

	return (0);
}

/*
 * Based on the ILLF_ROUTER flag of an ill, make sure all local nce's for
 * addresses assigned to the ill have the NCE_F_ISROUTER flag appropriately
 * set or clear.
 */
static void
ill_set_nce_router_flags(ill_t *ill, boolean_t enable)
{
	ipif_t *ipif;
	nce_t *nce;

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		nce = ndp_lookup_v6(ill, &ipif->ipif_v6lcl_addr, B_FALSE);
		if (nce != NULL) {
			mutex_enter(&nce->nce_lock);
			if (enable)
				nce->nce_flags |= NCE_F_ISROUTER;
			else
				nce->nce_flags &= ~NCE_F_ISROUTER;
			mutex_exit(&nce->nce_lock);
			NCE_REFRELE(nce);
		}
	}
}

/*
 * Given an ill with a _valid_ name, add the ip_forwarding ndd variable
 * for this ill.  Make sure the v6/v4 question has been answered about this
 * ill.  The creation of this ndd variable is only for backwards compatibility.
 * The preferred way to control per-interface IP forwarding is through the
 * ILLF_ROUTER interface flag.
 */
static int
ill_set_ndd_name(ill_t *ill)
{
	char *suffix;

	ASSERT(IAM_WRITER_ILL(ill));

	if (ill->ill_isv6)
		suffix = ipv6_forward_suffix;
	else
		suffix = ipv4_forward_suffix;

	ill->ill_ndd_name = ill->ill_name + ill->ill_name_length;
	bcopy(ill->ill_name, ill->ill_ndd_name, ill->ill_name_length - 1);
	/*
	 * Copies over the '\0'.
	 * Note that strlen(suffix) is always bounded.
	 */
	bcopy(suffix, ill->ill_ndd_name + ill->ill_name_length - 1,
	    strlen(suffix) + 1);

	/*
	 * Use of the nd table requires holding the reader lock.
	 * Modifying the nd table thru nd_load/nd_unload requires
	 * the writer lock.
	 */
	rw_enter(&ip_g_nd_lock, RW_WRITER);
	if (!nd_load(&ip_g_nd, ill->ill_ndd_name, nd_ill_forward_get,
	    nd_ill_forward_set, (caddr_t)ill)) {
		/*
		 * If the nd_load failed, it only meant that it could not
		 * allocate a new bunch of room for further NDD expansion.
		 * Because of that, the ill_ndd_name will be set to 0, and
		 * this interface is at the mercy of the global ip_forwarding
		 * variable.
		 */
		rw_exit(&ip_g_nd_lock);
		ill->ill_ndd_name = NULL;
		return (ENOMEM);
	}
	rw_exit(&ip_g_nd_lock);
	return (0);
}

/*
 * Intializes the context structure and returns the first ill in the list
 * cuurently start_list and end_list can have values:
 * MAX_G_HEADS		Traverse both IPV4 and IPV6 lists.
 * IP_V4_G_HEAD		Traverse IPV4 list only.
 * IP_V6_G_HEAD		Traverse IPV6 list only.
 */

/*
 * We don't check for CONDEMNED ills here. Caller must do that if
 * necessary under the ill lock.
 */
ill_t *
ill_first(int start_list, int end_list, ill_walk_context_t *ctx)
{
	ill_if_t *ifp;
	ill_t *ill;
	avl_tree_t *avl_tree;

	ASSERT(RW_LOCK_HELD(&ill_g_lock));
	ASSERT(end_list <= MAX_G_HEADS && start_list >= 0);

	/*
	 * setup the lists to search
	 */
	if (end_list != MAX_G_HEADS) {
		ctx->ctx_current_list = start_list;
		ctx->ctx_last_list = end_list;
	} else {
		ctx->ctx_last_list = MAX_G_HEADS - 1;
		ctx->ctx_current_list = 0;
	}

	while (ctx->ctx_current_list <= ctx->ctx_last_list) {
		ifp = IP_VX_ILL_G_LIST(ctx->ctx_current_list);
		if (ifp != (ill_if_t *)
		    &IP_VX_ILL_G_LIST(ctx->ctx_current_list)) {
			avl_tree = &ifp->illif_avl_by_ppa;
			ill = avl_first(avl_tree);
			/*
			 * ill is guaranteed to be non NULL or ifp should have
			 * not existed.
			 */
			ASSERT(ill != NULL);
			return (ill);
		}
		ctx->ctx_current_list++;
	}

	return (NULL);
}

/*
 * returns the next ill in the list. ill_first() must have been called
 * before calling ill_next() or bad things will happen.
 */

/*
 * We don't check for CONDEMNED ills here. Caller must do that if
 * necessary under the ill lock.
 */
ill_t *
ill_next(ill_walk_context_t *ctx, ill_t *lastill)
{
	ill_if_t *ifp;
	ill_t *ill;


	ASSERT(RW_LOCK_HELD(&ill_g_lock));
	ASSERT(lastill->ill_ifptr != (ill_if_t *)
	    &IP_VX_ILL_G_LIST(ctx->ctx_current_list));
	if ((ill = avl_walk(&lastill->ill_ifptr->illif_avl_by_ppa, lastill,
	    AVL_AFTER)) != NULL) {
		return (ill);
	}

	/* goto next ill_ifp in the list. */
	ifp = lastill->ill_ifptr->illif_next;

	/* make sure not at end of circular list */
	while (ifp == (ill_if_t *)&IP_VX_ILL_G_LIST(ctx->ctx_current_list)) {
		if (++ctx->ctx_current_list > ctx->ctx_last_list)
			return (NULL);
		ifp = IP_VX_ILL_G_LIST(ctx->ctx_current_list);
	}

	return (avl_first(&ifp->illif_avl_by_ppa));
}

/*
 * Check interface name for correct format which is name+ppa.
 * name can contain characters and digits, the right most digits
 * make up the ppa number. use of octal is not allowed, name must contain
 * a ppa, return pointer to the start of ppa.
 * In case of error return NULL.
 */
static char *
ill_get_ppa_ptr(char *name)
{
	int namelen = mi_strlen(name);

	int len = namelen;

	name += len;
	while (len > 0) {
		name--;
		if (*name < '0' || *name > '9')
			break;
		len--;
	}

	/* empty string, all digits, or no trailing digits */
	if (len == 0 || len == (int)namelen)
		return (NULL);

	name++;
	/* check for attempted use of octal */
	if (*name == '0' && len != (int)namelen - 1)
		return (NULL);
	return (name);
}

/*
 * use avl tree to locate the ill.
 */
static ill_t *
ill_find_by_name(char *name, boolean_t isv6, queue_t *q, mblk_t *mp,
    ipsq_func_t func, int *error)
{
	char *ppa_ptr = NULL;
	int len;
	uint_t ppa;
	ill_t *ill = NULL;
	ill_if_t *ifp;
	int list;
	ipsq_t *ipsq;

	if (error != NULL)
		*error = 0;

	/*
	 * get ppa ptr
	 */
	if (isv6)
		list = IP_V6_G_HEAD;
	else
		list = IP_V4_G_HEAD;

	if ((ppa_ptr = ill_get_ppa_ptr(name)) == NULL) {
		if (error != NULL)
			*error = ENXIO;
		return (NULL);
	}

	len = ppa_ptr - name + 1;

	ppa = stoi(&ppa_ptr);

	ifp = IP_VX_ILL_G_LIST(list);

	while (ifp != (ill_if_t *)&IP_VX_ILL_G_LIST(list)) {
		/*
		 * match is done on len - 1 as the name is not null
		 * terminated it contains ppa in addition to the interface
		 * name.
		 */
		if ((ifp->illif_name_len == len) &&
		    bcmp(ifp->illif_name, name, len - 1) == 0) {
			break;
		} else {
			ifp = ifp->illif_next;
		}
	}


	if (ifp == (ill_if_t *)&IP_VX_ILL_G_LIST(list)) {
		/*
		 * Even the interface type does not exist.
		 */
		if (error != NULL)
			*error = ENXIO;
		return (NULL);
	}

	ill = avl_find(&ifp->illif_avl_by_ppa, (void *) &ppa, NULL);
	if (ill != NULL) {
		/*
		 * The block comment at the start of ipif_down
		 * explains the use of the macros used below
		 */
		GRAB_CONN_LOCK(q);
		mutex_enter(&ill->ill_lock);
		if (ILL_CAN_LOOKUP(ill)) {
			ill_refhold_locked(ill);
			mutex_exit(&ill->ill_lock);
			RELEASE_CONN_LOCK(q);
			return (ill);
		} else if (ILL_CAN_WAIT(ill, q)) {
			ipsq = ill->ill_phyint->phyint_ipsq;
			mutex_enter(&ipsq->ipsq_lock);
			mutex_exit(&ill->ill_lock);
			ipsq_enq(ipsq, q, mp, func, NEW_OP, ill);
			mutex_exit(&ipsq->ipsq_lock);
			RELEASE_CONN_LOCK(q);
			*error = EINPROGRESS;
			return (NULL);
		}
		mutex_exit(&ill->ill_lock);
		RELEASE_CONN_LOCK(q);
	}
	if (error != NULL)
		*error = ENXIO;
	return (NULL);
}

/*
 * comparison function for use with avl.
 */
static int
ill_compare_ppa(const void *ppa_ptr, const void *ill_ptr)
{
	uint_t ppa;
	uint_t ill_ppa;

	ASSERT(ppa_ptr != NULL && ill_ptr != NULL);

	ppa = *((uint_t *)ppa_ptr);
	ill_ppa = ((const ill_t *)ill_ptr)->ill_ppa;
	/*
	 * We want the ill with the lowest ppa to be on the
	 * top.
	 */
	if (ill_ppa < ppa)
		return (1);
	if (ill_ppa > ppa)
		return (-1);
	return (0);
}

/*
 * remove an interface type from the global list.
 */
static void
ill_delete_interface_type(ill_if_t *interface)
{
	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	ASSERT(interface != NULL);
	ASSERT(avl_numnodes(&interface->illif_avl_by_ppa) == 0);

	avl_destroy(&interface->illif_avl_by_ppa);
	if (interface->illif_ppa_arena != NULL)
		vmem_destroy(interface->illif_ppa_arena);

	remque(interface);

	mi_free(interface);
}

/*
 * remove ill from the global list.
 */
static void
ill_glist_delete(ill_t *ill)
{
	if (ill == NULL)
		return;

	rw_enter(&ill_g_lock, RW_WRITER);
	/*
	 * If the ill was never inserted into the AVL tree
	 * we skip the if branch.
	 */
	if (ill->ill_ifptr != NULL) {
		/*
		 * remove from AVL tree and free ppa number
		 */
		avl_remove(&ill->ill_ifptr->illif_avl_by_ppa, ill);

		if (ill->ill_ifptr->illif_ppa_arena != NULL) {
			vmem_free(ill->ill_ifptr->illif_ppa_arena,
			    (void *)(uintptr_t)(ill->ill_ppa+1), 1);
		}
		if (avl_numnodes(&ill->ill_ifptr->illif_avl_by_ppa) == 0) {
			ill_delete_interface_type(ill->ill_ifptr);
		}

		/*
		 * Indicate ill is no longer in the list.
		 */
		ill->ill_ifptr = NULL;
		ill->ill_name_length = 0;
		ill->ill_name[0] = '\0';
		ill->ill_ppa = UINT_MAX;
	}
	ill_phyint_free(ill);
	rw_exit(&ill_g_lock);
}

/*
 * allocate a ppa, if the number of plumbed interfaces of this type are
 * less than ill_no_arena do a linear search to find a unused ppa.
 * When the number goes beyond ill_no_arena switch to using an arena.
 * Note: ppa value of zero cannot be allocated from vmem_arena as it
 * is the return value for an error condition, so allocation starts at one
 * and is decremented by one.
 */
static int
ill_alloc_ppa(ill_if_t *ifp, ill_t *ill)
{
	ill_t *tmp_ill;
	uint_t start, end;
	int ppa;

	if (ifp->illif_ppa_arena == NULL &&
	    (avl_numnodes(&ifp->illif_avl_by_ppa) + 1 > ill_no_arena)) {
		/*
		 * Create an arena.
		 */
		ifp->illif_ppa_arena = vmem_create(ifp->illif_name,
		    (void *)1, UINT_MAX - 1, 1, NULL, NULL,
		    NULL, 0, VM_SLEEP | VMC_IDENTIFIER);
			/* allocate what has already been assigned */
		for (tmp_ill = avl_first(&ifp->illif_avl_by_ppa);
		    tmp_ill != NULL; tmp_ill = avl_walk(&ifp->illif_avl_by_ppa,
		    tmp_ill, AVL_AFTER)) {
			ppa = (int)(uintptr_t)vmem_xalloc(ifp->illif_ppa_arena,
			    1,		/* size */
			    1,		/* align/quantum */
			    0,		/* phase */
			    0,		/* nocross */
		(void *)((uintptr_t)tmp_ill->ill_ppa + 1), /* minaddr */
		(void *)((uintptr_t)tmp_ill->ill_ppa + 2), /* maxaddr */
			    VM_NOSLEEP|VM_FIRSTFIT);
			if (ppa == 0) {
				ip1dbg(("ill_alloc_ppa: ppa allocation"
				    " failed while switching"));
				vmem_destroy(ifp->illif_ppa_arena);
				ifp->illif_ppa_arena = NULL;
				break;
			}
		}
	}

	if (ifp->illif_ppa_arena != NULL) {
		if (ill->ill_ppa == UINT_MAX) {
			ppa = (int)(uintptr_t)vmem_alloc(ifp->illif_ppa_arena,
			    1, VM_NOSLEEP|VM_FIRSTFIT);
			if (ppa == 0)
				return (EAGAIN);
			ill->ill_ppa = --ppa;
		} else {
			ppa = (int)(uintptr_t)vmem_xalloc(ifp->illif_ppa_arena,
			    1, 		/* size */
			    1, 		/* align/quantum */
			    0, 		/* phase */
			    0, 		/* nocross */
			    (void *)(uintptr_t)(ill->ill_ppa + 1), /* minaddr */
			    (void *)(uintptr_t)(ill->ill_ppa + 2), /* maxaddr */
			    VM_NOSLEEP|VM_FIRSTFIT);
			/*
			 * Most likely the allocation failed because
			 * the requested ppa was in use.
			 */
			if (ppa == 0)
				return (EEXIST);
		}
		return (0);
	}

	/*
	 * No arena is in use and not enough (>ill_no_arena) interfaces have
	 * been plumbed to create one. Do a linear search to get a unused ppa.
	 */
	if (ill->ill_ppa == UINT_MAX) {
		end = UINT_MAX - 1;
		start = 0;
	} else {
		end = start = ill->ill_ppa;
	}

	tmp_ill = avl_find(&ifp->illif_avl_by_ppa, (void *)&start, NULL);
	while (tmp_ill != NULL && tmp_ill->ill_ppa == start) {
		if (start++ >= end) {
			if (ill->ill_ppa == UINT_MAX)
				return (EAGAIN);
			else
				return (EEXIST);
		}
		tmp_ill = avl_walk(&ifp->illif_avl_by_ppa, tmp_ill, AVL_AFTER);
	}
	ill->ill_ppa = start;
	return (0);
}

/*
 * Insert ill into the list of configured ill's. Once this function completes,
 * the ill is globally visible and is available through lookups. More precisely
 * this happens after the caller drops the ill_g_lock.
 */
static int
ill_glist_insert(ill_t *ill, char *name, boolean_t isv6)
{
	ill_if_t *ill_interface;
	avl_index_t where = 0;
	int error;
	int name_length;
	int index;
	boolean_t check_length = B_FALSE;

	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	name_length = mi_strlen(name) + 1;

	if (isv6)
		index = IP_V6_G_HEAD;
	else
		index = IP_V4_G_HEAD;

	ill_interface = IP_VX_ILL_G_LIST(index);
	/*
	 * Search for interface type based on name
	 */
	while (ill_interface != (ill_if_t *)&IP_VX_ILL_G_LIST(index)) {
		if ((ill_interface->illif_name_len == name_length) &&
		    (strcmp(ill_interface->illif_name, name) == 0)) {
			break;
		}
		ill_interface = ill_interface->illif_next;
	}

	/*
	 * Interface type not found, create one.
	 */
	if (ill_interface == (ill_if_t *)&IP_VX_ILL_G_LIST(index)) {

		ill_g_head_t ghead;

		/*
		 * allocate ill_if_t structure
		 */

		ill_interface = (ill_if_t *)mi_zalloc(sizeof (ill_if_t));
		if (ill_interface == NULL) {
			return (ENOMEM);
		}



		(void) strcpy(ill_interface->illif_name, name);
		ill_interface->illif_name_len = name_length;

		avl_create(&ill_interface->illif_avl_by_ppa,
		    ill_compare_ppa, sizeof (ill_t),
		    offsetof(struct ill_s, ill_avl_byppa));

		/*
		 * link the structure in the back to maintain order
		 * of configuration for ifconfig output.
		 */
		ghead = ill_g_heads[index];
		insque(ill_interface, ghead.ill_g_list_tail);

	}

	if (ill->ill_ppa == UINT_MAX)
		check_length = B_TRUE;

	error = ill_alloc_ppa(ill_interface, ill);
	if (error != 0) {
		if (avl_numnodes(&ill_interface->illif_avl_by_ppa) == 0)
			ill_delete_interface_type(ill->ill_ifptr);
		return (error);
	}

	/*
	 * When the ppa is choosen by the system, check that there is
	 * enough space to insert ppa. if a specific ppa was passed in this
	 * check is not required as the interface name passed in will have
	 * the right ppa in it.
	 */
	if (check_length) {
		/*
		 * UINT_MAX - 1 should fit in 10 chars, alloc 12 chars.
		 */
		char buf[sizeof (uint_t) * 3];

		/*
		 * convert ppa to string to calculate the amount of space
		 * required for it in the name.
		 */
		numtos(ill->ill_ppa, buf);

		/* Do we have enough space to insert ppa ? */

		if ((mi_strlen(name) + mi_strlen(buf) + 1) > LIFNAMSIZ) {
			/* Free ppa and interface type struct */
			if (ill_interface->illif_ppa_arena != NULL) {
				vmem_free(ill_interface->illif_ppa_arena,
				    (void *)(uintptr_t)(ill->ill_ppa+1), 1);
			}
			if (avl_numnodes(&ill_interface->illif_avl_by_ppa) ==
			    0) {
				ill_delete_interface_type(ill->ill_ifptr);
			}

			return (EINVAL);
		}
	}

	(void) sprintf(ill->ill_name, "%s%u", name, ill->ill_ppa);
	ill->ill_name_length = mi_strlen(ill->ill_name) + 1;

	(void) avl_find(&ill_interface->illif_avl_by_ppa, &ill->ill_ppa,
	    &where);
	ill->ill_ifptr = ill_interface;
	avl_insert(&ill_interface->illif_avl_by_ppa, ill, where);

	ill_phyint_reinit(ill);
	return (0);
}

/* Initialize the per phyint (per IPMP group) ipsq used for serialization */
static boolean_t
ipsq_init(ill_t *ill)
{
	ipsq_t  *ipsq;

	/* Init the ipsq and impicitly enter as writer */
	ill->ill_phyint->phyint_ipsq =
	    kmem_zalloc(sizeof (ipsq_t), KM_NOSLEEP);
	if (ill->ill_phyint->phyint_ipsq == NULL)
		return (B_FALSE);
	ipsq = ill->ill_phyint->phyint_ipsq;
	ipsq->ipsq_phyint_list = ill->ill_phyint;
	ill->ill_phyint->phyint_ipsq_next = NULL;
	mutex_init(&ipsq->ipsq_lock, NULL, MUTEX_DEFAULT, 0);
	ipsq->ipsq_refs = 1;
	ipsq->ipsq_writer = curthread;
	ipsq->ipsq_reentry_cnt = 1;
#ifdef ILL_DEBUG
	ipsq->ipsq_depth = getpcstack((pc_t *)ipsq->ipsq_stack, IP_STACK_DEPTH);
#endif
	(void) strcpy(ipsq->ipsq_name, ill->ill_name);
	return (B_TRUE);
}

/*
 * ill_init is called by ip_open when a device control stream is opened.
 * It does a few initializations, and shoots a DL_INFO_REQ message down
 * to the driver.  The response is later picked up in ip_rput_dlpi and
 * used to set up default mechanisms for talking to the driver.  (Always
 * called as writer.)
 *
 * If this function returns error, ip_open will call ip_close which in
 * turn will call ill_delete to clean up any memory allocated here that
 * is not yet freed.
 */
int
ill_init(queue_t *q, ill_t *ill)
{
	int	count;
	dl_info_req_t	*dlir;
	mblk_t	*info_mp;
	uchar_t *frag_ptr;

	/*
	 * The ill is initialized to zero by mi_alloc*(). In addition
	 * some fields already contain valid values, initialized in
	 * ip_open(), before we reach here.
	 */
	mutex_init(&ill->ill_lock, NULL, MUTEX_DEFAULT, 0);

	ill->ill_rq = q;
	ill->ill_wq = WR(q);

	info_mp = allocb(MAX(sizeof (dl_info_req_t), sizeof (dl_info_ack_t)),
	    BPRI_HI);
	if (info_mp == NULL)
		return (ENOMEM);

	/*
	 * Allocate sufficient space to contain our fragment hash table and
	 * the device name.
	 */
	frag_ptr = (uchar_t *)mi_zalloc(ILL_FRAG_HASH_TBL_SIZE +
	    2 * LIFNAMSIZ + 5 + strlen(ipv6_forward_suffix));
	if (frag_ptr == NULL) {
		freemsg(info_mp);
		return (ENOMEM);
	}
	ill->ill_frag_ptr = frag_ptr;
	ill->ill_frag_free_num_pkts = 0;
	ill->ill_last_frag_clean_time = 0;
	ill->ill_frag_hash_tbl = (ipfb_t *)frag_ptr;
	ill->ill_name = (char *)(frag_ptr + ILL_FRAG_HASH_TBL_SIZE);
	for (count = 0; count < ILL_FRAG_HASH_TBL_COUNT; count++) {
		mutex_init(&ill->ill_frag_hash_tbl[count].ipfb_lock,
		    NULL, MUTEX_DEFAULT, NULL);
	}

	ill->ill_phyint = (phyint_t *)mi_zalloc(sizeof (phyint_t));
	if (ill->ill_phyint == NULL) {
		freemsg(info_mp);
		mi_free(frag_ptr);
		return (ENOMEM);
	}

	mutex_init(&ill->ill_phyint->phyint_lock, NULL, MUTEX_DEFAULT, 0);
	/*
	 * For now pretend this is a v4 ill. We need to set phyint_ill*
	 * at this point because of the following reason. If we can't
	 * enter the ipsq at some point and cv_wait, the writer that
	 * wakes us up tries to locate us using the list of all phyints
	 * in an ipsq and the ills from the phyint thru the phyint_ill*.
	 * If we don't set it now, we risk a missed wakeup.
	 */
	ill->ill_phyint->phyint_illv4 = ill;
	ill->ill_ppa = UINT_MAX;
	ill->ill_fastpath_list = &ill->ill_fastpath_list;

	if (!ipsq_init(ill)) {
		freemsg(info_mp);
		mi_free(frag_ptr);
		mi_free(ill->ill_phyint);
		return (ENOMEM);
	}

	ill->ill_state_flags |= ILL_LL_SUBNET_PENDING;


	/* Frag queue limit stuff */
	ill->ill_frag_count = 0;
	ill->ill_ipf_gen = 0;

	ill->ill_global_timer = INFINITY;
	ill->ill_mcast_type = IGMP_V3_ROUTER;	/* == MLD_V2_ROUTER */
	ill->ill_mcast_v1_time = ill->ill_mcast_v2_time = 0;
	ill->ill_mcast_v1_tset = ill->ill_mcast_v2_tset = 0;
	ill->ill_mcast_rv = MCAST_DEF_ROBUSTNESS;
	ill->ill_mcast_qi = MCAST_DEF_QUERY_INTERVAL;

	/*
	 * Initialize IPv6 configuration variables.  The IP module is always
	 * opened as an IPv4 module.  Instead tracking down the cases where
	 * it switches to do ipv6, we'll just initialize the IPv6 configuration
	 * here for convenience, this has no effect until the ill is set to do
	 * IPv6.
	 */
	ill->ill_reachable_time = ND_REACHABLE_TIME;
	ill->ill_reachable_retrans_time = ND_RETRANS_TIMER;
	ill->ill_xmit_count = ND_MAX_MULTICAST_SOLICIT;
	ill->ill_max_buf = ND_MAX_Q;
	ill->ill_refcnt = 0;

	/* Send down the Info Request to the driver. */
	info_mp->b_datap->db_type = M_PCPROTO;
	dlir = (dl_info_req_t *)info_mp->b_rptr;
	info_mp->b_wptr = (uchar_t *)&dlir[1];
	dlir->dl_primitive = DL_INFO_REQ;

	ill->ill_dlpi_pending = DL_PRIM_INVAL;

	qprocson(q);
	ill_dlpi_send(ill, info_mp);

	return (0);
}

/*
 * ill_dls_info
 * creates datalink socket info from the device.
 */
int
ill_dls_info(struct sockaddr_dl *sdl, const ipif_t *ipif)
{
	size_t	length;
	ill_t	*ill = ipif->ipif_ill;

	sdl->sdl_family = AF_LINK;
	sdl->sdl_index = ill->ill_phyint->phyint_ifindex;
	sdl->sdl_type = ipif->ipif_type;
	(void) ipif_get_name(ipif, sdl->sdl_data, sizeof (sdl->sdl_data));
	length = mi_strlen(sdl->sdl_data);
	ASSERT(length < 256);
	sdl->sdl_nlen = (uchar_t)length;
	sdl->sdl_alen = ill->ill_phys_addr_length;
	mutex_enter(&ill->ill_lock);
	if (ill->ill_phys_addr_length != 0 && ill->ill_phys_addr != NULL) {
		bcopy(ill->ill_phys_addr, &sdl->sdl_data[length],
		    ill->ill_phys_addr_length);
	}
	mutex_exit(&ill->ill_lock);
	sdl->sdl_slen = 0;
	return (sizeof (struct sockaddr_dl));
}

/*
 * ill_xarp_info
 * creates xarp info from the device.
 */
static int
ill_xarp_info(struct sockaddr_dl *sdl, ill_t *ill)
{
	sdl->sdl_family = AF_LINK;
	sdl->sdl_index = ill->ill_phyint->phyint_ifindex;
	sdl->sdl_type = ill->ill_type;
	(void) ipif_get_name(ill->ill_ipif, sdl->sdl_data,
	    sizeof (sdl->sdl_data));
	sdl->sdl_nlen = (uchar_t)mi_strlen(sdl->sdl_data);
	sdl->sdl_alen = ill->ill_phys_addr_length;
	sdl->sdl_slen = 0;
	return (sdl->sdl_nlen);
}

static int
loopback_kstat_update(kstat_t *ksp, int rw)
{
	kstat_named_t *kn = KSTAT_NAMED_PTR(ksp);

	if (rw == KSTAT_WRITE)
		return (EACCES);
	kn[0].value.ui32 = loopback_packets;
	kn[1].value.ui32 = loopback_packets;
	return (0);
}


/*
 * Has ifindex been plumbed already.
 */
static boolean_t
phyint_exists(uint_t index)
{
	phyint_t *phyi;

	ASSERT(RW_LOCK_HELD(&ill_g_lock));
	/*
	 * Indexes are stored in the phyint - a common structure
	 * to both IPv4 and IPv6.
	 */
	phyi = avl_find(&phyint_g_list.phyint_list_avl_by_index,
	    (void *) &index, NULL);
	return (phyi != NULL);
}

/*
 * Assign a unique interface index for the phyint.
 */
static boolean_t
phyint_assign_ifindex(phyint_t *phyi)
{
	uint_t starting_index;

	ASSERT(phyi->phyint_ifindex == 0);
	if (!ill_index_wrap) {
		phyi->phyint_ifindex = ill_index++;
		if (ill_index == 0) {
			/* Reached the uint_t limit Next time wrap  */
			ill_index_wrap = B_TRUE;
		}
		return (B_TRUE);
	}

	/*
	 * Start reusing unused indexes. Note that we hold the ill_g_lock
	 * at this point and don't want to call any function that attempts
	 * to get the lock again.
	 */
	starting_index = ill_index++;
	for (; ill_index != starting_index; ill_index++) {
		if (ill_index != 0 && !phyint_exists(ill_index)) {
			/* found unused index - use it */
			phyi->phyint_ifindex = ill_index;
			return (B_TRUE);
		}
	}

	/*
	 * all interface indicies are inuse.
	 */
	return (B_FALSE);
}

/*
 * Return a pointer to the ill which matches the supplied name.  Note that
 * the ill name length includes the null termination character.  (May be
 * called as writer.)
 * If do_alloc and the interface is "lo0" it will be automatically created.
 * Cannot bump up reference on condemned ills. So dup detect can't be done
 * using this func.
 */
ill_t *
ill_lookup_on_name(char *name, boolean_t do_alloc, boolean_t isv6,
    queue_t *q, mblk_t *mp, ipsq_func_t func, int *error, boolean_t *did_alloc)
{
	ill_t	*ill;
	ipif_t	*ipif;
	kstat_named_t	*kn;
	boolean_t isloopback;
	ipsq_t *old_ipsq;

	isloopback = mi_strcmp(name, ipif_loopback_name) == 0;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ill_find_by_name(name, isv6, q, mp, func, error);
	rw_exit(&ill_g_lock);
	if (ill != NULL || (error != NULL && *error == EINPROGRESS))
		return (ill);

	/*
	 * Couldn't find it.  Does this happen to be a lookup for the
	 * loopback device and are we allowed to allocate it?
	 */
	if (!isloopback || !do_alloc)
		return (NULL);

	rw_enter(&ill_g_lock, RW_WRITER);

	ill = ill_find_by_name(name, isv6, q, mp, func, error);
	if (ill != NULL || (error != NULL && *error == EINPROGRESS)) {
		rw_exit(&ill_g_lock);
		return (ill);
	}

	/* Create the loopback device on demand */
	ill = (ill_t *)(mi_alloc(sizeof (ill_t) +
	    sizeof (ipif_loopback_name), BPRI_MED));
	if (ill == NULL)
		goto done;

	*ill = ill_null;
	mutex_init(&ill->ill_lock, NULL, MUTEX_DEFAULT, NULL);
	ill->ill_phyint = (phyint_t *)mi_zalloc(sizeof (phyint_t));
	if (ill->ill_phyint == NULL)
		goto done;

	if (isv6)
		ill->ill_phyint->phyint_illv6 = ill;
	else
		ill->ill_phyint->phyint_illv4 = ill;
	mutex_init(&ill->ill_phyint->phyint_lock, NULL, MUTEX_DEFAULT, 0);
	ill->ill_max_frag = IP_LOOPBACK_MTU;
	/* Add room for tcp+ip headers */
	if (isv6) {
		ill->ill_isv6 = B_TRUE;
		ill->ill_max_frag += IPV6_HDR_LEN + 20;	/* for TCP */
		if (!ill_allocate_mibs(ill))
			goto done;
	} else {
		ill->ill_max_frag += IP_SIMPLE_HDR_LENGTH + 20;
	}
	ill->ill_max_mtu = ill->ill_max_frag;
	/*
	 * ipif_loopback_name can't be pointed at directly because its used
	 * by both the ipv4 and ipv6 interfaces.  When the ill is removed
	 * from the glist, ill_glist_delete() sets the first character of
	 * ill_name to '\0'.
	 */
	ill->ill_name = (char *)ill + sizeof (*ill);
	(void) strcpy(ill->ill_name, ipif_loopback_name);
	ill->ill_name_length = sizeof (ipif_loopback_name);
	/* Set ill_name_set for ill_phyint_reinit to work properly */

	ill->ill_global_timer = INFINITY;
	ill->ill_mcast_type = IGMP_V3_ROUTER;	/* == MLD_V2_ROUTER */
	ill->ill_mcast_v1_time = ill->ill_mcast_v2_time = 0;
	ill->ill_mcast_v1_tset = ill->ill_mcast_v2_tset = 0;
	ill->ill_mcast_rv = MCAST_DEF_ROBUSTNESS;
	ill->ill_mcast_qi = MCAST_DEF_QUERY_INTERVAL;

	/* No resolver here. */
	ill->ill_net_type = IRE_LOOPBACK;

	/* Initialize the ipsq */
	if (!ipsq_init(ill))
		goto done;

	ill->ill_phyint->phyint_ipsq->ipsq_writer = NULL;
	ill->ill_phyint->phyint_ipsq->ipsq_reentry_cnt--;
	ASSERT(ill->ill_phyint->phyint_ipsq->ipsq_reentry_cnt == 0);
#ifdef ILL_DEBUG
	ill->ill_phyint->phyint_ipsq->ipsq_depth = 0;
#endif
	ipif = ipif_allocate(ill, 0L, IRE_LOOPBACK, B_TRUE);
	if (ipif == NULL)
		goto done;

	ill->ill_flags = ILLF_MULTICAST;

	/* Set up default loopback address and mask. */
	if (!isv6) {
		ipaddr_t inaddr_loopback = htonl(INADDR_LOOPBACK);

		IN6_IPADDR_TO_V4MAPPED(inaddr_loopback, &ipif->ipif_v6lcl_addr);
		ipif->ipif_v6src_addr = ipif->ipif_v6lcl_addr;
		V4MASK_TO_V6(htonl(IN_CLASSA_NET), ipif->ipif_v6net_mask);
		V6_MASK_COPY(ipif->ipif_v6lcl_addr, ipif->ipif_v6net_mask,
		    ipif->ipif_v6subnet);
		ill->ill_flags |= ILLF_IPV4;
	} else {
		ipif->ipif_v6lcl_addr = ipv6_loopback;
		ipif->ipif_v6src_addr = ipif->ipif_v6lcl_addr;
		ipif->ipif_v6net_mask = ipv6_all_ones;
		V6_MASK_COPY(ipif->ipif_v6lcl_addr, ipif->ipif_v6net_mask,
		    ipif->ipif_v6subnet);
		ill->ill_flags |= ILLF_IPV6;
	}

	/*
	 * Chain us in at the end of the ill list. hold the ill
	 * before we make it globally visible. 1 for the lookup.
	 */
	ill->ill_refcnt = 0;
	ill_refhold(ill);

	ill->ill_frag_count = 0;
	ill->ill_frag_free_num_pkts = 0;
	ill->ill_last_frag_clean_time = 0;

	old_ipsq = ill->ill_phyint->phyint_ipsq;

	if (ill_glist_insert(ill, "lo", isv6) != 0)
		cmn_err(CE_PANIC, "cannot insert loopback interface");

	/* Let SCTP know so that it can add this to its list */
	sctp_update_ill(ill, SCTP_ILL_INSERT);

	/* Let SCTP know about this IPIF, so that it can add it to its list */
	sctp_update_ipif(ipif, SCTP_IPIF_INSERT);

	/*
	 * If the ipsq was changed in ill_phyint_reinit free the old ipsq.
	 */
	if (old_ipsq != ill->ill_phyint->phyint_ipsq) {
		/* Loopback ills aren't in any IPMP group */
		ASSERT(!(old_ipsq->ipsq_flags & IPSQ_GROUP));
		ipsq_delete(old_ipsq);
	}

	/*
	 * Delay this till the ipif is allocated as ipif_allocate
	 * de-references ill_phyint for getting the ifindex. We
	 * can't do this before ipif_allocate because ill_phyint_reinit
	 * -> phyint_assign_ifindex expects ipif to be present.
	 */
	mutex_enter(&ill->ill_phyint->phyint_lock);
	ill->ill_phyint->phyint_flags |= PHYI_LOOPBACK | PHYI_VIRTUAL;
	mutex_exit(&ill->ill_phyint->phyint_lock);

	if (loopback_ksp == NULL) {
		/* Export loopback interface statistics */
		loopback_ksp = kstat_create("lo", 0, ipif_loopback_name, "net",
		    KSTAT_TYPE_NAMED, 2, 0);
		if (loopback_ksp != NULL) {
			loopback_ksp->ks_update = loopback_kstat_update;
			kn = KSTAT_NAMED_PTR(loopback_ksp);
			kstat_named_init(&kn[0], "ipackets", KSTAT_DATA_UINT32);
			kstat_named_init(&kn[1], "opackets", KSTAT_DATA_UINT32);
			kstat_install(loopback_ksp);
		}
	}

	if (error != NULL)
		*error = 0;
	*did_alloc = B_TRUE;
	rw_exit(&ill_g_lock);
	return (ill);
done:
	if (ill != NULL) {
		if (ill->ill_phyint != NULL) {
			ipsq_t	*ipsq;

			ipsq = ill->ill_phyint->phyint_ipsq;
			if (ipsq != NULL)
				kmem_free(ipsq, sizeof (ipsq_t));
			mi_free(ill->ill_phyint);
		}
		ill_free_mib(ill);
		mi_free(ill);
	}
	rw_exit(&ill_g_lock);
	if (error != NULL)
		*error = ENOMEM;
	return (NULL);
}

/*
 * Return a pointer to the ill which matches the index and IP version type.
 */
ill_t *
ill_lookup_on_ifindex(uint_t index, boolean_t isv6, queue_t *q, mblk_t *mp,
    ipsq_func_t func, int *err)
{
	ill_t	*ill;
	ipsq_t  *ipsq;
	phyint_t *phyi;

	ASSERT((q == NULL && mp == NULL && func == NULL && err == NULL) ||
	    (q != NULL && mp != NULL && func != NULL && err != NULL));

	if (err != NULL)
		*err = 0;

	/*
	 * Indexes are stored in the phyint - a common structure
	 * to both IPv4 and IPv6.
	 */
	rw_enter(&ill_g_lock, RW_READER);
	phyi = avl_find(&phyint_g_list.phyint_list_avl_by_index,
	    (void *) &index, NULL);
	if (phyi != NULL) {
		ill = isv6 ? phyi->phyint_illv6: phyi->phyint_illv4;
		if (ill != NULL) {
			/*
			 * The block comment at the start of ipif_down
			 * explains the use of the macros used below
			 */
			GRAB_CONN_LOCK(q);
			mutex_enter(&ill->ill_lock);
			if (ILL_CAN_LOOKUP(ill)) {
				ill_refhold_locked(ill);
				mutex_exit(&ill->ill_lock);
				RELEASE_CONN_LOCK(q);
				rw_exit(&ill_g_lock);
				return (ill);
			} else if (ILL_CAN_WAIT(ill, q)) {
				ipsq = ill->ill_phyint->phyint_ipsq;
				mutex_enter(&ipsq->ipsq_lock);
				rw_exit(&ill_g_lock);
				mutex_exit(&ill->ill_lock);
				ipsq_enq(ipsq, q, mp, func, NEW_OP, ill);
				mutex_exit(&ipsq->ipsq_lock);
				RELEASE_CONN_LOCK(q);
				*err = EINPROGRESS;
				return (NULL);
			}
			RELEASE_CONN_LOCK(q);
			mutex_exit(&ill->ill_lock);
		}
	}
	rw_exit(&ill_g_lock);
	if (err != NULL)
		*err = ENXIO;
	return (NULL);
}

/*
 * Obtain a reference to the ill. The ill_refcnt is a dynamic refcnt
 * that gives a running thread a reference to the ill. This reference must be
 * released by the thread when it is done accessing the ill and related
 * objects. ill_refcnt can not be used to account for static references
 * such as other structures pointing to an ill. Callers must generally
 * check whether an ill can be refheld by using ILL_CAN_LOOKUP macros
 * or be sure that the ill is not being deleted or changing state before
 * calling the refhold functions. A non-zero ill_refcnt ensures that the
 * ill won't change any of its critical state such as address, netmask etc.
 */
void
ill_refhold(ill_t *ill)
{
	mutex_enter(&ill->ill_lock);
	ill->ill_refcnt++;
	ILL_TRACE_REF(ill);
	mutex_exit(&ill->ill_lock);
}

void
ill_refhold_locked(ill_t *ill)
{
	ASSERT(MUTEX_HELD(&ill->ill_lock));
	ill->ill_refcnt++;
	ILL_TRACE_REF(ill);
}

int
ill_check_and_refhold(ill_t *ill)
{
	mutex_enter(&ill->ill_lock);
	if (ILL_CAN_LOOKUP(ill)) {
		ill_refhold_locked(ill);
		mutex_exit(&ill->ill_lock);
		return (0);
	}
	mutex_exit(&ill->ill_lock);
	return (ILL_LOOKUP_FAILED);
}

/*
 * Must not be called while holding any locks. Otherwise if this is
 * the last reference to be released, there is a chance of recursive mutex
 * panic due to ill_refrele -> ipif_ill_refrele_tail -> qwriter_ip trying
 * to restart an ioctl.
 */
void
ill_refrele(ill_t *ill)
{
	mutex_enter(&ill->ill_lock);
	ASSERT(ill->ill_refcnt != 0);
	ill->ill_refcnt--;
	ILL_UNTRACE_REF(ill);
	if (ill->ill_refcnt != 0) {
		/* Every ire pointing to the ill adds 1 to ill_refcnt */
		mutex_exit(&ill->ill_lock);
		return;
	}

	/* Drops the ill_lock */
	ipif_ill_refrele_tail(ill);
}

/*
 * Obtain a weak reference count on the ill. This reference ensures the
 * ill won't be freed, but the ill may change any of its critical state
 * such as netmask, address etc. Returns an error if the ill has started
 * closing.
 */
boolean_t
ill_waiter_inc(ill_t *ill)
{
	mutex_enter(&ill->ill_lock);
	if (ill->ill_state_flags & ILL_CONDEMNED) {
		mutex_exit(&ill->ill_lock);
		return (B_FALSE);
	}
	ill->ill_waiters++;
	mutex_exit(&ill->ill_lock);
	return (B_TRUE);
}

void
ill_waiter_dcr(ill_t *ill)
{
	mutex_enter(&ill->ill_lock);
	ill->ill_waiters--;
	if (ill->ill_waiters == 0)
		cv_broadcast(&ill->ill_cv);
	mutex_exit(&ill->ill_lock);
}

/*
 * Named Dispatch routine to produce a formatted report on all ILLs.
 * This report is accessed by using the ndd utility to "get" ND variable
 * "ip_ill_status".
 */
/* ARGSUSED */
int
ip_ill_report(queue_t *q, mblk_t *mp, caddr_t arg, cred_t *ioc_cr)
{
	ill_t		*ill;
	ill_walk_context_t ctx;

	(void) mi_mpprintf(mp,
	    "ILL      " MI_COL_HDRPAD_STR
	/*   01234567[89ABCDEF] */
	    "rq       " MI_COL_HDRPAD_STR
	/*   01234567[89ABCDEF] */
	    "wq       " MI_COL_HDRPAD_STR
	/*   01234567[89ABCDEF] */
	    "upcnt mxfrg err name");
	/*   12345 12345 123 xxxxxxxx  */

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_ALL(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		(void) mi_mpprintf(mp,
		    MI_COL_PTRFMT_STR MI_COL_PTRFMT_STR MI_COL_PTRFMT_STR
		    "%05u %05u %03d %s",
		    (void *)ill, (void *)ill->ill_rq, (void *)ill->ill_wq,
		    ill->ill_ipif_up_count,
		    ill->ill_max_frag, ill->ill_error, ill->ill_name);
	}
	rw_exit(&ill_g_lock);

	return (0);
}

/*
 * Named Dispatch routine to produce a formatted report on all IPIFs.
 * This report is accessed by using the ndd utility to "get" ND variable
 * "ip_ipif_status".
 */
/* ARGSUSED */
int
ip_ipif_report(queue_t *q, mblk_t *mp, caddr_t arg, cred_t *ioc_cr)
{
	char	buf1[INET6_ADDRSTRLEN];
	char	buf2[INET6_ADDRSTRLEN];
	char	buf3[INET6_ADDRSTRLEN];
	char	buf4[INET6_ADDRSTRLEN];
	char	buf5[INET6_ADDRSTRLEN];
	char	buf6[INET6_ADDRSTRLEN];
	char	buf[LIFNAMSIZ];
	ill_t	*ill;
	ipif_t	*ipif;
	nv_t	*nvp;
	uint64_t flags;
	zoneid_t zoneid;
	ill_walk_context_t ctx;

	(void) mi_mpprintf(mp,
	    "IPIF metric mtu in/out/forward name zone flags...\n"
	    "\tlocal address\n"
	    "\tsrc address\n"
	    "\tsubnet\n"
	    "\tmask\n"
	    "\tbroadcast\n"
	    "\tp-p-dst");

	ASSERT(q->q_next == NULL);
	zoneid = Q_TO_CONN(q)->conn_zoneid;	/* IP is a driver */

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_ALL(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif; ipif = ipif->ipif_next) {
			if (zoneid != GLOBAL_ZONEID &&
			    zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES)
				continue;
			(void) mi_mpprintf(mp,
			    MI_COL_PTRFMT_STR
			    "%04u %05u %u/%u/%u %s %d",
			    (void *)ipif,
			    ipif->ipif_metric, ipif->ipif_mtu,
			    ipif->ipif_ib_pkt_count,
			    ipif->ipif_ob_pkt_count,
			    ipif->ipif_fo_pkt_count,
			    ipif_get_name(ipif, buf, sizeof (buf)),
			    ipif->ipif_zoneid);

		flags = ipif->ipif_flags | ipif->ipif_ill->ill_flags |
		    ipif->ipif_ill->ill_phyint->phyint_flags;

		/* Tack on text strings for any flags. */
		nvp = ipif_nv_tbl;
		for (; nvp < A_END(ipif_nv_tbl); nvp++) {
			if (nvp->nv_value & flags)
				(void) mi_mpprintf_nr(mp, " %s",
				    nvp->nv_name);
		}
		(void) mi_mpprintf(mp,
		    "\t%s\n\t%s\n\t%s\n\t%s\n\t%s\n\t%s",
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6lcl_addr, buf1, sizeof (buf1)),
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6src_addr, buf2, sizeof (buf2)),
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6subnet, buf3, sizeof (buf3)),
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6net_mask, buf4, sizeof (buf4)),
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6brd_addr, buf5, sizeof (buf5)),
		    inet_ntop(AF_INET6,
			&ipif->ipif_v6pp_dst_addr,
			buf6, sizeof (buf6)));
		}
	}
	rw_exit(&ill_g_lock);
	return (0);
}

/*
 * ip_ll_subnet_defaults is called when we get the DL_INFO_ACK back from the
 * driver.  We construct best guess defaults for lower level information that
 * we need.  If an interface is brought up without injection of any overriding
 * information from outside, we have to be ready to go with these defaults.
 * When we get the first DL_INFO_ACK (from ip_open() sending a DL_INFO_REQ)
 * we primarely want the dl_provider_style.
 * The subsequent DL_INFO_ACK is received after doing a DL_ATTACH and DL_BIND
 * at which point we assume the other part of the information is valid.
 */
void
ip_ll_subnet_defaults(ill_t *ill, mblk_t *mp)
{
	uchar_t		*brdcst_addr;
	uint_t		brdcst_addr_length, phys_addr_length;
	t_scalar_t	sap_length;
	dl_info_ack_t	*dlia;
	ip_m_t		*ipm;
	dl_qos_cl_sel1_t *sel1;

	ASSERT(IAM_WRITER_ILL(ill));

	/*
	 * Till the ill is fully up ILL_CHANGING will be set and
	 * the ill is not globally visible. So no need for a lock.
	 */
	dlia = (dl_info_ack_t *)mp->b_rptr;
	ill->ill_mactype = dlia->dl_mac_type;

	ipm = ip_m_lookup(dlia->dl_mac_type);
	if (ipm == NULL) {
		ipm = ip_m_lookup(DL_OTHER);
		ASSERT(ipm != NULL);
	}
	ill->ill_media = ipm;

	/*
	 * When the new DLPI stuff is ready we'll pull lengths
	 * from dlia.
	 */
	if (dlia->dl_version == DL_VERSION_2) {
		brdcst_addr_length = dlia->dl_brdcst_addr_length;
		brdcst_addr = mi_offset_param(mp, dlia->dl_brdcst_addr_offset,
		    brdcst_addr_length);
		if (brdcst_addr == NULL) {
			brdcst_addr_length = 0;
		}
		sap_length = dlia->dl_sap_length;
		phys_addr_length = dlia->dl_addr_length - ABS(sap_length);
		ip1dbg(("ip: bcast_len %d, sap_len %d, phys_len %d\n",
		    brdcst_addr_length, sap_length, phys_addr_length));
	} else {
		brdcst_addr_length = 6;
		brdcst_addr = ip_six_byte_all_ones;
		sap_length = -2;
		phys_addr_length = brdcst_addr_length;
	}

	ill->ill_bcast_addr_length = brdcst_addr_length;
	ill->ill_phys_addr_length = phys_addr_length;
	ill->ill_sap_length = sap_length;
	ill->ill_max_frag = dlia->dl_max_sdu;
	ill->ill_max_mtu = ill->ill_max_frag;

	ill->ill_type = ipm->ip_m_type;

	if (!ill->ill_dlpi_style_set) {
		if (dlia->dl_provider_style == DL_STYLE2)
			ill->ill_needs_attach = 1;

		/*
		 * Allocate the first ipif on this ill. We don't delay it
		 * further as ioctl handling assumes atleast one ipif to
		 * be present.
		 *
		 * At this point we don't know whether the ill is v4 or v6.
		 * We will know this whan the SIOCSLIFNAME happens and
		 * the correct value for ill_isv6 will be assigned in
		 * ipif_set_values(). We need to hold the ill lock and
		 * clear the ILL_LL_SUBNET_PENDING flag and atomically do
		 * the wakeup.
		 */
		(void) ipif_allocate(ill, 0, IRE_LOCAL,
		    dlia->dl_provider_style == DL_STYLE2 ? B_FALSE : B_TRUE);
		mutex_enter(&ill->ill_lock);
		ASSERT(ill->ill_dlpi_style_set == 0);
		ill->ill_dlpi_style_set = 1;
		ill->ill_state_flags &= ~ILL_LL_SUBNET_PENDING;
		cv_broadcast(&ill->ill_cv);
		mutex_exit(&ill->ill_lock);
		freemsg(mp);
		return;
	}
	ASSERT(ill->ill_ipif != NULL);
	/*
	 * We know whether it is IPv4 or IPv6 now, as this is the
	 * second DL_INFO_ACK we are recieving in response to the
	 * DL_INFO_REQ sent in ipif_set_values.
	 */
	if (ill->ill_isv6)
		ill->ill_sap = IP6_DL_SAP;
	else
		ill->ill_sap = IP_DL_SAP;
	/*
	 * Set ipif_mtu which is used to set the IRE's
	 * ire_max_frag value. The driver could have sent
	 * a different mtu from what it sent last time. No
	 * need to call ipif_mtu_change because IREs have
	 * not yet been created.
	 */
	ill->ill_ipif->ipif_mtu = ill->ill_max_mtu;
	/*
	 * Clear all the flags that were set based on ill_bcast_addr_length
	 * and ill_phys_addr_length (in ipif_set_values) as these could have
	 * changed now and we need to re-evaluate.
	 */
	ill->ill_flags &= ~(ILLF_MULTICAST | ILLF_NONUD | ILLF_NOARP);
	ill->ill_ipif->ipif_flags &= ~(IPIF_BROADCAST | IPIF_POINTOPOINT);

	/*
	 * Free ill_resolver_mp and ill_bcast_mp as things could have
	 * changed now.
	 */
	if (ill->ill_bcast_addr_length == 0) {
		if (ill->ill_resolver_mp != NULL)
			freemsg(ill->ill_resolver_mp);
		if (ill->ill_bcast_mp != NULL)
			freemsg(ill->ill_bcast_mp);
		if (ill->ill_flags & ILLF_XRESOLV)
			ill->ill_net_type = IRE_IF_RESOLVER;
		else
			ill->ill_net_type = IRE_IF_NORESOLVER;
		ill->ill_resolver_mp = ill_dlur_gen(NULL,
		    ill->ill_phys_addr_length,
		    ill->ill_sap,
		    ill->ill_sap_length);
		ill->ill_bcast_mp = copymsg(ill->ill_resolver_mp);

		if (ill->ill_isv6)
			/*
			 * Note: xresolv interfaces will eventually need NOARP
			 * set here as well, but that will require those
			 * external resolvers to have some knowledge of
			 * that flag and act appropriately. Not to be changed
			 * at present.
			 */
			ill->ill_flags |= ILLF_NONUD;
		else
			ill->ill_flags |= ILLF_NOARP;

		if (ill->ill_phys_addr_length == 0) {
			if (ill->ill_media->ip_m_mac_type == SUNW_DL_VNI) {
				ill->ill_ipif->ipif_flags |= IPIF_NOXMIT;
				ill->ill_phyint->phyint_flags |= PHYI_VIRTUAL;
			} else {
				/* pt-pt supports multicast. */
				ill->ill_flags |= ILLF_MULTICAST;
				ill->ill_ipif->ipif_flags |= IPIF_POINTOPOINT;
			}
		}
	} else {
		ill->ill_net_type = IRE_IF_RESOLVER;
		if (ill->ill_bcast_mp != NULL)
			freemsg(ill->ill_bcast_mp);
		ill->ill_bcast_mp = ill_dlur_gen(brdcst_addr,
		    ill->ill_bcast_addr_length, ill->ill_sap,
		    ill->ill_sap_length);
		/*
		 * Later detect lack of DLPI driver multicast
		 * capability by catching DL_ENABMULTI errors in
		 * ip_rput_dlpi.
		 */
		ill->ill_flags |= ILLF_MULTICAST;
		if (!ill->ill_isv6)
			ill->ill_ipif->ipif_flags |= IPIF_BROADCAST;
	}
	/* By default an interface does not support any CoS marking */
	ill->ill_flags &= ~ILLF_COS_ENABLED;

	/*
	 * If we get QoS information in DL_INFO_ACK, the device supports
	 * some form of CoS marking, set ILLF_COS_ENABLED.
	 */
	sel1 = (dl_qos_cl_sel1_t *)mi_offset_param(mp, dlia->dl_qos_offset,
	    dlia->dl_qos_length);
	if ((sel1 != NULL) && (sel1->dl_qos_type == DL_QOS_CL_SEL1)) {
		ill->ill_flags |= ILLF_COS_ENABLED;
	}

	/* Clear any previous error indication. */
	ill->ill_error = 0;
	freemsg(mp);
}

/*
 * Perform various checks to verify that an address would make sense as a
 * local, remote, or subnet interface address.
 */
static boolean_t
ip_addr_ok_v4(ipaddr_t addr, ipaddr_t subnet_mask)
{
	ipaddr_t	net_mask;

	/*
	 * Don't allow all zeroes, all ones or experimental address, but allow
	 * all ones netmask.
	 */
	if ((net_mask = ip_net_mask(addr)) == 0)
		return (B_FALSE);
	/* A given netmask overrides the "guess" netmask */
	if (subnet_mask != 0)
		net_mask = subnet_mask;
	if ((net_mask != ~(ipaddr_t)0) && ((addr == (addr & net_mask)) ||
	    (addr == (addr | ~net_mask)))) {
		return (B_FALSE);
	}
	if (CLASSD(addr))
		return (B_FALSE);

	return (B_TRUE);
}

/*
 * ipif_lookup_group
 * Returns held ipif
 */
ipif_t *
ipif_lookup_group(ipaddr_t group, zoneid_t zoneid)
{
	ire_t	*ire;
	ipif_t	*ipif;

	ire = ire_lookup_multi(group, zoneid);
	if (ire == NULL)
		return (NULL);
	ipif = ire->ire_ipif;
	ipif_refhold(ipif);
	ire_refrele(ire);
	return (ipif);
}

/*
 * Look for an ipif with the specified interface address and destination.
 * The destination address is used only for matching point-to-point interfaces.
 */
ipif_t *
ipif_lookup_interface(ipaddr_t if_addr, ipaddr_t dst, queue_t *q, mblk_t *mp,
    ipsq_func_t func, int *error)
{
	ipif_t	*ipif;
	ill_t	*ill;
	ill_walk_context_t ctx;
	ipsq_t	*ipsq;

	if (error != NULL)
		*error = 0;

	/*
	 * First match all the point-to-point interfaces
	 * before looking at non-point-to-point interfaces.
	 * This is done to avoid returning non-point-to-point
	 * ipif instead of unnumbered point-to-point ipif.
	 */
	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_V4(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		GRAB_CONN_LOCK(q);
		mutex_enter(&ill->ill_lock);
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			/* Allow the ipif to be down */
			if ((ipif->ipif_flags & IPIF_POINTOPOINT) &&
			    (ipif->ipif_lcl_addr == if_addr) &&
			    (ipif->ipif_pp_dst_addr == dst)) {
				/*
				 * The block comment at the start of ipif_down
				 * explains the use of the macros used below
				 */
				if (IPIF_CAN_LOOKUP(ipif)) {
					ipif_refhold_locked(ipif);
					mutex_exit(&ill->ill_lock);
					RELEASE_CONN_LOCK(q);
					rw_exit(&ill_g_lock);
					return (ipif);
				} else if (IPIF_CAN_WAIT(ipif, q)) {
					ipsq = ill->ill_phyint->phyint_ipsq;
					mutex_enter(&ipsq->ipsq_lock);
					mutex_exit(&ill->ill_lock);
					rw_exit(&ill_g_lock);
					ipsq_enq(ipsq, q, mp, func, NEW_OP,
						ill);
					mutex_exit(&ipsq->ipsq_lock);
					RELEASE_CONN_LOCK(q);
					*error = EINPROGRESS;
					return (NULL);
				}
			}
		}
		mutex_exit(&ill->ill_lock);
		RELEASE_CONN_LOCK(q);
	}
	rw_exit(&ill_g_lock);

	/* lookup the ipif based on interface address */
	ipif = ipif_lookup_addr(if_addr, NULL, ALL_ZONES, q, mp, func, error);
	ASSERT(ipif == NULL || !ipif->ipif_isv6);
	return (ipif);
}

/*
 * Look for an ipif with the specified address. For point-point links
 * we look for matches on either the destination address and the local
 * address, but we ignore the check on the local address if IPIF_UNNUMBERED
 * is set.
 * Matches on a specific ill if match_ill is set.
 */
ipif_t *
ipif_lookup_addr(ipaddr_t addr, ill_t *match_ill, zoneid_t zoneid, queue_t *q,
    mblk_t *mp, ipsq_func_t func, int *error)
{
	ipif_t  *ipif;
	ill_t   *ill;
	boolean_t ptp = B_FALSE;
	ipsq_t	*ipsq;
	ill_walk_context_t	ctx;

	if (error != NULL)
		*error = 0;

	rw_enter(&ill_g_lock, RW_READER);
	/*
	 * Repeat twice, first based on local addresses and
	 * next time for pointopoint.
	 */
repeat:
	ill = ILL_START_WALK_V4(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		if (match_ill != NULL && ill != match_ill) {
			continue;
		}
		GRAB_CONN_LOCK(q);
		mutex_enter(&ill->ill_lock);
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (zoneid != ALL_ZONES &&
			    zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES)
				continue;
			/* Allow the ipif to be down */
			if ((!ptp && (ipif->ipif_lcl_addr == addr) &&
			    ((ipif->ipif_flags & IPIF_UNNUMBERED) == 0)) ||
			    (ptp && (ipif->ipif_flags & IPIF_POINTOPOINT) &&
			    (ipif->ipif_pp_dst_addr == addr))) {
				/*
				 * The block comment at the start of ipif_down
				 * explains the use of the macros used below
				 */
				if (IPIF_CAN_LOOKUP(ipif)) {
					ipif_refhold_locked(ipif);
					mutex_exit(&ill->ill_lock);
					RELEASE_CONN_LOCK(q);
					rw_exit(&ill_g_lock);
					return (ipif);
				} else if (IPIF_CAN_WAIT(ipif, q)) {
					ipsq = ill->ill_phyint->phyint_ipsq;
					mutex_enter(&ipsq->ipsq_lock);
					mutex_exit(&ill->ill_lock);
					rw_exit(&ill_g_lock);
					ipsq_enq(ipsq, q, mp, func, NEW_OP,
						ill);
					mutex_exit(&ipsq->ipsq_lock);
					RELEASE_CONN_LOCK(q);
					*error = EINPROGRESS;
					return (NULL);
				}
			}
		}
		mutex_exit(&ill->ill_lock);
		RELEASE_CONN_LOCK(q);
	}

	/* Now try the ptp case */
	if (ptp) {
		rw_exit(&ill_g_lock);
		if (error != NULL)
			*error = ENXIO;
		return (NULL);
	}
	ptp = B_TRUE;
	goto repeat;
}

/*
 * Look for an ipif that matches the specified remote address i.e. the
 * ipif that would receive the specified packet.
 * First look for directly connected interfaces and then do a recursive
 * IRE lookup and pick the first ipif corresponding to the source address in the
 * ire.
 * Returns: held ipif
 */
ipif_t *
ipif_lookup_remote(ill_t *ill, ipaddr_t addr, zoneid_t zoneid)
{
	ipif_t	*ipif;
	ire_t	*ire;

	ASSERT(!ill->ill_isv6);

	/*
	 * Someone could be changing this ipif currently or change it
	 * after we return this. Thus  a few packets could use the old
	 * old values. However structure updates/creates (ire, ilg, ilm etc)
	 * will atomically be updated or cleaned up with the new value
	 * Thus we don't need a lock to check the flags or other attrs below.
	 */
	mutex_enter(&ill->ill_lock);
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (!IPIF_CAN_LOOKUP(ipif))
			continue;
		if (zoneid != ALL_ZONES && zoneid != ipif->ipif_zoneid &&
		    ipif->ipif_zoneid != ALL_ZONES)
			continue;
		/* Allow the ipif to be down */
		if (ipif->ipif_flags & IPIF_POINTOPOINT) {
			if ((ipif->ipif_pp_dst_addr == addr) ||
			    (!(ipif->ipif_flags & IPIF_UNNUMBERED) &&
			    ipif->ipif_lcl_addr == addr)) {
				ipif_refhold_locked(ipif);
				mutex_exit(&ill->ill_lock);
				return (ipif);
			}
		} else if (ipif->ipif_subnet == (addr & ipif->ipif_net_mask)) {
			ipif_refhold_locked(ipif);
			mutex_exit(&ill->ill_lock);
			return (ipif);
		}
	}
	mutex_exit(&ill->ill_lock);
	ire = ire_route_lookup(addr, 0, 0, 0, NULL, NULL, zoneid,
	    NULL, MATCH_IRE_RECURSIVE);
	if (ire != NULL) {
		/*
		 * The callers of this function wants to know the
		 * interface on which they have to send the replies
		 * back. For IRE_CACHES that have ire_stq and ire_ipif
		 * derived from different ills, we really don't care
		 * what we return here.
		 */
		ipif = ire->ire_ipif;
		if (ipif != NULL) {
			ipif_refhold(ipif);
			ire_refrele(ire);
			return (ipif);
		}
		ire_refrele(ire);
	}
	/* Pick the first interface */
	ipif = ipif_get_next_ipif(NULL, ill);
	return (ipif);
}

/*
 * This func does not prevent refcnt from increasing. But if
 * the caller has taken steps to that effect, then this func
 * can be used to determine whether the ill has become quiescent
 */
boolean_t
ill_is_quiescent(ill_t *ill)
{
	ipif_t	*ipif;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (ipif->ipif_refcnt != 0 || ipif->ipif_ire_cnt != 0) {
			return (B_FALSE);
		}
	}
	if (ill->ill_ire_cnt != 0 || ill->ill_refcnt != 0 ||
	    ill->ill_nce_cnt != 0 || ill->ill_srcif_refcnt != 0 ||
	    ill->ill_mrtun_refcnt != 0) {
		return (B_FALSE);
	}
	return (B_TRUE);
}

/*
 * This func does not prevent refcnt from increasing. But if
 * the caller has taken steps to that effect, then this func
 * can be used to determine whether the ipif has become quiescent
 */
static boolean_t
ipif_is_quiescent(ipif_t *ipif)
{
	ill_t *ill;

	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	if (ipif->ipif_refcnt != 0 || ipif->ipif_ire_cnt != 0) {
		return (B_FALSE);
	}

	ill = ipif->ipif_ill;
	if (ill->ill_ipif_up_count != 0 || ill->ill_ipif_dup_count != 0 ||
	    ill->ill_logical_down) {
		return (B_TRUE);
	}

	/* This is the last ipif going down or being deleted on this ill */
	if (ill->ill_ire_cnt != 0 || ill->ill_refcnt != 0) {
		return (B_FALSE);
	}

	return (B_TRUE);
}

/*
 * This func does not prevent refcnt from increasing. But if
 * the caller has taken steps to that effect, then this func
 * can be used to determine whether the ipifs marked with IPIF_MOVING
 * have become quiescent and can be moved in a failover/failback.
 */
static ipif_t *
ill_quiescent_to_move(ill_t *ill)
{
	ipif_t  *ipif;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (ipif->ipif_state_flags & IPIF_MOVING) {
			if (ipif->ipif_refcnt != 0 || ipif->ipif_ire_cnt != 0) {
				return (ipif);
			}
		}
	}
	return (NULL);
}

/*
 * The ipif/ill/ire has been refreled. Do the tail processing.
 * Determine if the ipif or ill in question has become quiescent and if so
 * wakeup close and/or restart any queued pending ioctl that is waiting
 * for the ipif_down (or ill_down)
 */
void
ipif_ill_refrele_tail(ill_t *ill)
{
	mblk_t	*mp;
	conn_t	*connp;
	ipsq_t	*ipsq;
	ipif_t	*ipif;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	if ((ill->ill_state_flags & ILL_CONDEMNED) &&
	    ill_is_quiescent(ill)) {
		/* ill_close may be waiting */
		cv_broadcast(&ill->ill_cv);
	}

	/* ipsq can't change because ill_lock  is held */
	ipsq = ill->ill_phyint->phyint_ipsq;
	if (ipsq->ipsq_waitfor == 0) {
		/* Not waiting for anything, just return. */
		mutex_exit(&ill->ill_lock);
		return;
	}
	ASSERT(ipsq->ipsq_pending_mp != NULL &&
		ipsq->ipsq_pending_ipif != NULL);
	/*
	 * ipif->ipif_refcnt must go down to zero for restarting REMOVEIF.
	 * Last ipif going down needs to down the ill, so ill_ire_cnt must
	 * be zero for restarting an ioctl that ends up downing the ill.
	 */
	ipif = ipsq->ipsq_pending_ipif;
	if (ipif->ipif_ill != ill) {
		/* The ioctl is pending on some other ill. */
		mutex_exit(&ill->ill_lock);
		return;
	}

	switch (ipsq->ipsq_waitfor) {
	case IPIF_DOWN:
	case IPIF_FREE:
		if (!ipif_is_quiescent(ipif)) {
			mutex_exit(&ill->ill_lock);
			return;
		}
		break;

	case ILL_DOWN:
	case ILL_FREE:
		/*
		 * case ILL_FREE arises only for loopback. otherwise ill_delete
		 * waits synchronously in ip_close, and no message is queued in
		 * ipsq_pending_mp at all in this case
		 */
		if (!ill_is_quiescent(ill)) {
			mutex_exit(&ill->ill_lock);
			return;
		}

		break;

	case ILL_MOVE_OK:
		if (ill_quiescent_to_move(ill) != NULL) {
			mutex_exit(&ill->ill_lock);
			return;
		}

		break;
	default:
		cmn_err(CE_PANIC, "ipsq: %p unknown ipsq_waitfor %d\n",
		    (void *)ipsq, ipsq->ipsq_waitfor);
	}

	/*
	 * Incr refcnt for the qwriter_ip call below which
	 * does a refrele
	 */
	ill_refhold_locked(ill);
	mutex_exit(&ill->ill_lock);

	mp = ipsq_pending_mp_get(ipsq, &connp);
	ASSERT(mp != NULL);

	switch (mp->b_datap->db_type) {
	case M_ERROR:
	case M_HANGUP:
		(void) qwriter_ip(NULL, ill, ill->ill_rq, mp,
		    ipif_all_down_tail, CUR_OP, B_TRUE);
		return;

	case M_IOCTL:
	case M_IOCDATA:
		(void) qwriter_ip(NULL, ill,
		    (connp != NULL ? CONNP_TO_WQ(connp) : ill->ill_wq), mp,
		    ip_reprocess_ioctl, CUR_OP, B_TRUE);
		return;

	default:
		cmn_err(CE_PANIC, "ipif_ill_refrele_tail mp %p "
		    "db_type %d\n", (void *)mp, mp->b_datap->db_type);
	}
}

#ifdef ILL_DEBUG
/* Reuse trace buffer from beginning (if reached the end) and record trace */
void
th_trace_rrecord(th_trace_t *th_trace)
{
	tr_buf_t *tr_buf;
	uint_t lastref;

	lastref = th_trace->th_trace_lastref;
	lastref++;
	if (lastref == TR_BUF_MAX)
		lastref = 0;
	th_trace->th_trace_lastref = lastref;
	tr_buf = &th_trace->th_trbuf[lastref];
	tr_buf->tr_depth = getpcstack(tr_buf->tr_stack, IP_STACK_DEPTH);
}

th_trace_t *
th_trace_ipif_lookup(ipif_t *ipif)
{
	int bucket_id;
	th_trace_t *th_trace;

	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	bucket_id = IP_TR_HASH(curthread);
	ASSERT(bucket_id < IP_TR_HASH_MAX);

	for (th_trace = ipif->ipif_trace[bucket_id]; th_trace != NULL;
	    th_trace = th_trace->th_next) {
		if (th_trace->th_id == curthread)
			return (th_trace);
	}
	return (NULL);
}

void
ipif_trace_ref(ipif_t *ipif)
{
	int bucket_id;
	th_trace_t *th_trace;

	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	if (ipif->ipif_trace_disable)
		return;

	/*
	 * Attempt to locate the trace buffer for the curthread.
	 * If it does not exist, then allocate a new trace buffer
	 * and link it in list of trace bufs for this ipif, at the head
	 */
	th_trace = th_trace_ipif_lookup(ipif);
	if (th_trace == NULL) {
		bucket_id = IP_TR_HASH(curthread);
		th_trace = (th_trace_t *)kmem_zalloc(sizeof (th_trace_t),
		    KM_NOSLEEP);
		if (th_trace == NULL) {
			ipif->ipif_trace_disable = B_TRUE;
			ipif_trace_cleanup(ipif);
			return;
		}
		th_trace->th_id = curthread;
		th_trace->th_next = ipif->ipif_trace[bucket_id];
		th_trace->th_prev = &ipif->ipif_trace[bucket_id];
		if (th_trace->th_next != NULL)
			th_trace->th_next->th_prev = &th_trace->th_next;
		ipif->ipif_trace[bucket_id] = th_trace;
	}
	ASSERT(th_trace->th_refcnt >= 0 &&
		th_trace->th_refcnt < TR_BUF_MAX -1);
	th_trace->th_refcnt++;
	th_trace_rrecord(th_trace);
}

void
ipif_untrace_ref(ipif_t *ipif)
{
	th_trace_t *th_trace;

	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	if (ipif->ipif_trace_disable)
		return;
	th_trace = th_trace_ipif_lookup(ipif);
	ASSERT(th_trace != NULL);
	ASSERT(th_trace->th_refcnt > 0);

	th_trace->th_refcnt--;
	th_trace_rrecord(th_trace);
}

th_trace_t *
th_trace_ill_lookup(ill_t *ill)
{
	th_trace_t *th_trace;
	int bucket_id;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	bucket_id = IP_TR_HASH(curthread);
	ASSERT(bucket_id < IP_TR_HASH_MAX);

	for (th_trace = ill->ill_trace[bucket_id]; th_trace != NULL;
	    th_trace = th_trace->th_next) {
		if (th_trace->th_id == curthread)
			return (th_trace);
	}
	return (NULL);
}

void
ill_trace_ref(ill_t *ill)
{
	int bucket_id;
	th_trace_t *th_trace;

	ASSERT(MUTEX_HELD(&ill->ill_lock));
	if (ill->ill_trace_disable)
		return;
	/*
	 * Attempt to locate the trace buffer for the curthread.
	 * If it does not exist, then allocate a new trace buffer
	 * and link it in list of trace bufs for this ill, at the head
	 */
	th_trace = th_trace_ill_lookup(ill);
	if (th_trace == NULL) {
		bucket_id = IP_TR_HASH(curthread);
		th_trace = (th_trace_t *)kmem_zalloc(sizeof (th_trace_t),
		    KM_NOSLEEP);
		if (th_trace == NULL) {
			ill->ill_trace_disable = B_TRUE;
			ill_trace_cleanup(ill);
			return;
		}
		th_trace->th_id = curthread;
		th_trace->th_next = ill->ill_trace[bucket_id];
		th_trace->th_prev = &ill->ill_trace[bucket_id];
		if (th_trace->th_next != NULL)
			th_trace->th_next->th_prev = &th_trace->th_next;
		ill->ill_trace[bucket_id] = th_trace;
	}
	ASSERT(th_trace->th_refcnt >= 0 &&
		th_trace->th_refcnt < TR_BUF_MAX - 1);

	th_trace->th_refcnt++;
	th_trace_rrecord(th_trace);
}

void
ill_untrace_ref(ill_t *ill)
{
	th_trace_t *th_trace;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	if (ill->ill_trace_disable)
		return;
	th_trace = th_trace_ill_lookup(ill);
	ASSERT(th_trace != NULL);
	ASSERT(th_trace->th_refcnt > 0);

	th_trace->th_refcnt--;
	th_trace_rrecord(th_trace);
}

/*
 * Verify that this thread has no refs to the ipif and free
 * the trace buffers
 */
/* ARGSUSED */
void
ipif_thread_exit(ipif_t *ipif, void *dummy)
{
	th_trace_t *th_trace;

	mutex_enter(&ipif->ipif_ill->ill_lock);

	th_trace = th_trace_ipif_lookup(ipif);
	if (th_trace == NULL) {
		mutex_exit(&ipif->ipif_ill->ill_lock);
		return;
	}
	ASSERT(th_trace->th_refcnt == 0);
	/* unlink th_trace and free it */
	*th_trace->th_prev = th_trace->th_next;
	if (th_trace->th_next != NULL)
		th_trace->th_next->th_prev = th_trace->th_prev;
	th_trace->th_next = NULL;
	th_trace->th_prev = NULL;
	kmem_free(th_trace, sizeof (th_trace_t));

	mutex_exit(&ipif->ipif_ill->ill_lock);
}

/*
 * Verify that this thread has no refs to the ill and free
 * the trace buffers
 */
/* ARGSUSED */
void
ill_thread_exit(ill_t *ill, void *dummy)
{
	th_trace_t *th_trace;

	mutex_enter(&ill->ill_lock);

	th_trace = th_trace_ill_lookup(ill);
	if (th_trace == NULL) {
		mutex_exit(&ill->ill_lock);
		return;
	}
	ASSERT(th_trace->th_refcnt == 0);
	/* unlink th_trace and free it */
	*th_trace->th_prev = th_trace->th_next;
	if (th_trace->th_next != NULL)
		th_trace->th_next->th_prev = th_trace->th_prev;
	th_trace->th_next = NULL;
	th_trace->th_prev = NULL;
	kmem_free(th_trace, sizeof (th_trace_t));

	mutex_exit(&ill->ill_lock);
}
#endif

#ifdef ILL_DEBUG
void
ip_thread_exit(void)
{
	ill_t	*ill;
	ipif_t	*ipif;
	ill_walk_context_t	ctx;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_ALL(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			ipif_thread_exit(ipif, NULL);
		}
		ill_thread_exit(ill, NULL);
	}
	rw_exit(&ill_g_lock);

	ire_walk(ire_thread_exit, NULL);
	ndp_walk_common(&ndp4, NULL, nce_thread_exit, NULL, B_FALSE);
	ndp_walk_common(&ndp6, NULL, nce_thread_exit, NULL, B_FALSE);
}

/*
 * Called when ipif is unplumbed or when memory alloc fails
 */
void
ipif_trace_cleanup(ipif_t *ipif)
{
	int	i;
	th_trace_t	*th_trace;
	th_trace_t	*th_trace_next;

	for (i = 0; i < IP_TR_HASH_MAX; i++) {
		for (th_trace = ipif->ipif_trace[i]; th_trace != NULL;
		    th_trace = th_trace_next) {
			th_trace_next = th_trace->th_next;
			kmem_free(th_trace, sizeof (th_trace_t));
		}
		ipif->ipif_trace[i] = NULL;
	}
}

/*
 * Called when ill is unplumbed or when memory alloc fails
 */
void
ill_trace_cleanup(ill_t *ill)
{
	int	i;
	th_trace_t	*th_trace;
	th_trace_t	*th_trace_next;

	for (i = 0; i < IP_TR_HASH_MAX; i++) {
		for (th_trace = ill->ill_trace[i]; th_trace != NULL;
		    th_trace = th_trace_next) {
			th_trace_next = th_trace->th_next;
			kmem_free(th_trace, sizeof (th_trace_t));
		}
		ill->ill_trace[i] = NULL;
	}
}

#else
void ip_thread_exit(void) {}
#endif

void
ipif_refhold_locked(ipif_t *ipif)
{
	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));
	ipif->ipif_refcnt++;
	IPIF_TRACE_REF(ipif);
}

void
ipif_refhold(ipif_t *ipif)
{
	ill_t	*ill;

	ill = ipif->ipif_ill;
	mutex_enter(&ill->ill_lock);
	ipif->ipif_refcnt++;
	IPIF_TRACE_REF(ipif);
	mutex_exit(&ill->ill_lock);
}

/*
 * Must not be called while holding any locks. Otherwise if this is
 * the last reference to be released there is a chance of recursive mutex
 * panic due to ipif_refrele -> ipif_ill_refrele_tail -> qwriter_ip trying
 * to restart an ioctl.
 */
void
ipif_refrele(ipif_t *ipif)
{
	ill_t	*ill;

	ill = ipif->ipif_ill;

	mutex_enter(&ill->ill_lock);
	ASSERT(ipif->ipif_refcnt != 0);
	ipif->ipif_refcnt--;
	IPIF_UNTRACE_REF(ipif);
	if (ipif->ipif_refcnt != 0) {
		mutex_exit(&ill->ill_lock);
		return;
	}

	/* Drops the ill_lock */
	ipif_ill_refrele_tail(ill);
}

ipif_t *
ipif_get_next_ipif(ipif_t *curr, ill_t *ill)
{
	ipif_t	*ipif;

	mutex_enter(&ill->ill_lock);
	for (ipif = (curr == NULL ? ill->ill_ipif : curr->ipif_next);
	    ipif != NULL; ipif = ipif->ipif_next) {
		if (!IPIF_CAN_LOOKUP(ipif))
			continue;
		ipif_refhold_locked(ipif);
		mutex_exit(&ill->ill_lock);
		return (ipif);
	}
	mutex_exit(&ill->ill_lock);
	return (NULL);
}

/*
 * TODO: make this table extendible at run time
 * Return a pointer to the mac type info for 'mac_type'
 */
static ip_m_t *
ip_m_lookup(t_uscalar_t mac_type)
{
	ip_m_t	*ipm;

	for (ipm = ip_m_tbl; ipm < A_END(ip_m_tbl); ipm++)
		if (ipm->ip_m_mac_type == mac_type)
			return (ipm);
	return (NULL);
}

/*
 * ip_rt_add is called to add an IPv4 route to the forwarding table.
 * ipif_arg is passed in to associate it with the correct interface.
 * We may need to restart this operation if the ipif cannot be looked up
 * due to an exclusive operation that is currently in progress. The restart
 * entry point is specified by 'func'
 */
int
ip_rt_add(ipaddr_t dst_addr, ipaddr_t mask, ipaddr_t gw_addr,
    ipaddr_t src_addr, int flags, ipif_t *ipif_arg, ipif_t *src_ipif,
    ire_t **ire_arg, boolean_t ioctl_msg, queue_t *q, mblk_t *mp,
    ipsq_func_t func, struct rtsa_s *sp)
{
	ire_t	*ire;
	ire_t	*gw_ire = NULL;
	ipif_t	*ipif = NULL;
	boolean_t ipif_refheld = B_FALSE;
	uint_t	type;
	int	match_flags = MATCH_IRE_TYPE;
	int	error;
	tsol_gc_t *gc = NULL;
	tsol_gcgrp_t *gcgrp = NULL;
	boolean_t gcgrp_xtraref = B_FALSE;

	ip1dbg(("ip_rt_add:"));

	if (ire_arg != NULL)
		*ire_arg = NULL;

	/*
	 * If this is the case of RTF_HOST being set, then we set the netmask
	 * to all ones (regardless if one was supplied).
	 */
	if (flags & RTF_HOST)
		mask = IP_HOST_MASK;

	/*
	 * Prevent routes with a zero gateway from being created (since
	 * interfaces can currently be plumbed and brought up no assigned
	 * address).
	 * For routes with RTA_SRCIFP, the gateway address can be 0.0.0.0.
	 */
	if (gw_addr == 0 && src_ipif == NULL)
		return (ENETUNREACH);
	/*
	 * Get the ipif, if any, corresponding to the gw_addr
	 */
	if (gw_addr != 0) {
		ipif = ipif_lookup_interface(gw_addr, dst_addr, q, mp, func,
		    &error);
		if (ipif != NULL) {
			if (IS_VNI(ipif->ipif_ill)) {
				ipif_refrele(ipif);
				return (EINVAL);
			}
			ipif_refheld = B_TRUE;
		} else if (error == EINPROGRESS) {
			ip1dbg(("ip_rt_add: null and EINPROGRESS"));
			return (EINPROGRESS);
		} else {
			error = 0;
		}
	}

	if (ipif != NULL) {
		ip1dbg(("ip_rt_add: ipif_lookup_interface done ipif nonnull"));
		ASSERT(!MUTEX_HELD(&ipif->ipif_ill->ill_lock));
	} else {
		ip1dbg(("ip_rt_add: ipif_lookup_interface done ipif is null"));
	}

	/*
	 * GateD will attempt to create routes with a loopback interface
	 * address as the gateway and with RTF_GATEWAY set.  We allow
	 * these routes to be added, but create them as interface routes
	 * since the gateway is an interface address.
	 */
	if ((ipif != NULL) && (ipif->ipif_ire_type == IRE_LOOPBACK)) {
		flags &= ~RTF_GATEWAY;
		if (gw_addr == INADDR_LOOPBACK && dst_addr == INADDR_LOOPBACK &&
		    mask == IP_HOST_MASK) {
			ire = ire_ctable_lookup(dst_addr, 0, IRE_LOOPBACK, ipif,
			    ALL_ZONES, NULL, match_flags);
			if (ire != NULL) {
				ire_refrele(ire);
				if (ipif_refheld)
					ipif_refrele(ipif);
				return (EEXIST);
			}
			ip1dbg(("ipif_up_done: 0x%p creating IRE 0x%x"
			    "for 0x%x\n", (void *)ipif,
			    ipif->ipif_ire_type,
			    ntohl(ipif->ipif_lcl_addr)));
			ire = ire_create(
			    (uchar_t *)&dst_addr,	/* dest address */
			    (uchar_t *)&mask,		/* mask */
			    (uchar_t *)&ipif->ipif_src_addr,
			    NULL,			/* no gateway */
			    NULL,
			    &ipif->ipif_mtu,
			    NULL,
			    ipif->ipif_rq,		/* recv-from queue */
			    NULL,			/* no send-to queue */
			    ipif->ipif_ire_type,	/* LOOPBACK */
			    NULL,
			    ipif,
			    NULL,
			    0,
			    0,
			    0,
			    (ipif->ipif_flags & IPIF_PRIVATE) ?
			    RTF_PRIVATE : 0,
			    &ire_uinfo_null,
			    NULL,
			    NULL);

			if (ire == NULL) {
				if (ipif_refheld)
					ipif_refrele(ipif);
				return (ENOMEM);
			}
			error = ire_add(&ire, q, mp, func, B_FALSE);
			if (error == 0)
				goto save_ire;
			if (ipif_refheld)
				ipif_refrele(ipif);
			return (error);

		}
	}

	/*
	 * Traditionally, interface routes are ones where RTF_GATEWAY isn't set
	 * and the gateway address provided is one of the system's interface
	 * addresses.  By using the routing socket interface and supplying an
	 * RTA_IFP sockaddr with an interface index, an alternate method of
	 * specifying an interface route to be created is available which uses
	 * the interface index that specifies the outgoing interface rather than
	 * the address of an outgoing interface (which may not be able to
	 * uniquely identify an interface).  When coupled with the RTF_GATEWAY
	 * flag, routes can be specified which not only specify the next-hop to
	 * be used when routing to a certain prefix, but also which outgoing
	 * interface should be used.
	 *
	 * Previously, interfaces would have unique addresses assigned to them
	 * and so the address assigned to a particular interface could be used
	 * to identify a particular interface.  One exception to this was the
	 * case of an unnumbered interface (where IPIF_UNNUMBERED was set).
	 *
	 * With the advent of IPv6 and its link-local addresses, this
	 * restriction was relaxed and interfaces could share addresses between
	 * themselves.  In fact, typically all of the link-local interfaces on
	 * an IPv6 node or router will have the same link-local address.  In
	 * order to differentiate between these interfaces, the use of an
	 * interface index is necessary and this index can be carried inside a
	 * RTA_IFP sockaddr (which is actually a sockaddr_dl).  One restriction
	 * of using the interface index, however, is that all of the ipif's that
	 * are part of an ill have the same index and so the RTA_IFP sockaddr
	 * cannot be used to differentiate between ipif's (or logical
	 * interfaces) that belong to the same ill (physical interface).
	 *
	 * For example, in the following case involving IPv4 interfaces and
	 * logical interfaces
	 *
	 *	192.0.2.32	255.255.255.224	192.0.2.33	U	if0
	 *	192.0.2.32	255.255.255.224	192.0.2.34	U	if0:1
	 *	192.0.2.32	255.255.255.224	192.0.2.35	U	if0:2
	 *
	 * the ipif's corresponding to each of these interface routes can be
	 * uniquely identified by the "gateway" (actually interface address).
	 *
	 * In this case involving multiple IPv6 default routes to a particular
	 * link-local gateway, the use of RTA_IFP is necessary to specify which
	 * default route is of interest:
	 *
	 *	default		fe80::123:4567:89ab:cdef	U	if0
	 *	default		fe80::123:4567:89ab:cdef	U	if1
	 */

	/* RTF_GATEWAY not set */
	if (!(flags & RTF_GATEWAY)) {
		queue_t	*stq;
		queue_t	*rfq = NULL;
		ill_t	*in_ill = NULL;

		if (sp != NULL) {
			ip2dbg(("ip_rt_add: gateway security attributes "
			    "cannot be set with interface route\n"));
			if (ipif_refheld)
				ipif_refrele(ipif);
			return (EINVAL);
		}

		/*
		 * As the interface index specified with the RTA_IFP sockaddr is
		 * the same for all ipif's off of an ill, the matching logic
		 * below uses MATCH_IRE_ILL if such an index was specified.
		 * This means that routes sharing the same prefix when added
		 * using a RTA_IFP sockaddr must have distinct interface
		 * indices (namely, they must be on distinct ill's).
		 *
		 * On the other hand, since the gateway address will usually be
		 * different for each ipif on the system, the matching logic
		 * uses MATCH_IRE_IPIF in the case of a traditional interface
		 * route.  This means that interface routes for the same prefix
		 * can be created if they belong to distinct ipif's and if a
		 * RTA_IFP sockaddr is not present.
		 */
		if (ipif_arg != NULL) {
			if (ipif_refheld)  {
				ipif_refrele(ipif);
				ipif_refheld = B_FALSE;
			}
			ipif = ipif_arg;
			match_flags |= MATCH_IRE_ILL;
		} else {
			/*
			 * Check the ipif corresponding to the gw_addr
			 */
			if (ipif == NULL)
				return (ENETUNREACH);
			match_flags |= MATCH_IRE_IPIF;
		}
		ASSERT(ipif != NULL);
		/*
		 * If src_ipif is not NULL, we have to create
		 * an ire with non-null ire_in_ill value
		 */
		if (src_ipif != NULL) {
			in_ill = src_ipif->ipif_ill;
		}

		/*
		 * We check for an existing entry at this point.
		 *
		 * Since a netmask isn't passed in via the ioctl interface
		 * (SIOCADDRT), we don't check for a matching netmask in that
		 * case.
		 */
		if (!ioctl_msg)
			match_flags |= MATCH_IRE_MASK;
		if (src_ipif != NULL) {
			/* Look up in the special table */
			ire = ire_srcif_table_lookup(dst_addr, IRE_INTERFACE,
			    ipif, src_ipif->ipif_ill, match_flags);
		} else {
			ire = ire_ftable_lookup(dst_addr, mask, 0,
			    IRE_INTERFACE, ipif, NULL, ALL_ZONES, 0,
			    NULL, match_flags);
		}
		if (ire != NULL) {
			ire_refrele(ire);
			if (ipif_refheld)
				ipif_refrele(ipif);
			return (EEXIST);
		}

		if (src_ipif != NULL) {
			/*
			 * Create the special ire for the IRE table
			 * which hangs out of ire_in_ill. This ire
			 * is in-between IRE_CACHE and IRE_INTERFACE.
			 * Thus rfq is non-NULL.
			 */
			rfq = ipif->ipif_rq;
		}
		/* Create the usual interface ires */

		stq = (ipif->ipif_net_type == IRE_IF_RESOLVER)
		    ? ipif->ipif_rq : ipif->ipif_wq;

		/*
		 * Create a copy of the IRE_LOOPBACK,
		 * IRE_IF_NORESOLVER or IRE_IF_RESOLVER with
		 * the modified address and netmask.
		 */
		ire = ire_create(
		    (uchar_t *)&dst_addr,
		    (uint8_t *)&mask,
		    (uint8_t *)&ipif->ipif_src_addr,
		    NULL,
		    NULL,
		    &ipif->ipif_mtu,
		    NULL,
		    rfq,
		    stq,
		    ipif->ipif_net_type,
		    ipif->ipif_resolver_mp,
		    ipif,
		    in_ill,
		    0,
		    0,
		    0,
		    flags,
		    &ire_uinfo_null,
		    NULL,
		    NULL);
		if (ire == NULL) {
			if (ipif_refheld)
				ipif_refrele(ipif);
			return (ENOMEM);
		}

		/*
		 * Some software (for example, GateD and Sun Cluster) attempts
		 * to create (what amount to) IRE_PREFIX routes with the
		 * loopback address as the gateway.  This is primarily done to
		 * set up prefixes with the RTF_REJECT flag set (for example,
		 * when generating aggregate routes.)
		 *
		 * If the IRE type (as defined by ipif->ipif_net_type) is
		 * IRE_LOOPBACK, then we map the request into a
		 * IRE_IF_NORESOLVER.
		 *
		 * Needless to say, the real IRE_LOOPBACK is NOT created by this
		 * routine, but rather using ire_create() directly.
		 *
		 */
		if (ipif->ipif_net_type == IRE_LOOPBACK)
			ire->ire_type = IRE_IF_NORESOLVER;

		error = ire_add(&ire, q, mp, func, B_FALSE);
		if (error == 0)
			goto save_ire;

		/*
		 * In the result of failure, ire_add() will have already
		 * deleted the ire in question, so there is no need to
		 * do that here.
		 */
		if (ipif_refheld)
			ipif_refrele(ipif);
		return (error);
	}
	if (ipif_refheld) {
		ipif_refrele(ipif);
		ipif_refheld = B_FALSE;
	}

	if (src_ipif != NULL) {
		/* RTA_SRCIFP is not supported on RTF_GATEWAY */
		ip2dbg(("ip_rt_add: SRCIF cannot be set with gateway route\n"));
		return (EINVAL);
	}
	/*
	 * Get an interface IRE for the specified gateway.
	 * If we don't have an IRE_IF_NORESOLVER or IRE_IF_RESOLVER for the
	 * gateway, it is currently unreachable and we fail the request
	 * accordingly.
	 */
	ipif = ipif_arg;
	if (ipif_arg != NULL)
		match_flags |= MATCH_IRE_ILL;
	gw_ire = ire_ftable_lookup(gw_addr, 0, 0, IRE_INTERFACE, ipif_arg, NULL,
	    ALL_ZONES, 0, NULL, match_flags);
	if (gw_ire == NULL)
		return (ENETUNREACH);

	/*
	 * We create one of three types of IREs as a result of this request
	 * based on the netmask.  A netmask of all ones (which is automatically
	 * assumed when RTF_HOST is set) results in an IRE_HOST being created.
	 * An all zeroes netmask implies a default route so an IRE_DEFAULT is
	 * created.  Otherwise, an IRE_PREFIX route is created for the
	 * destination prefix.
	 */
	if (mask == IP_HOST_MASK)
		type = IRE_HOST;
	else if (mask == 0)
		type = IRE_DEFAULT;
	else
		type = IRE_PREFIX;

	/* check for a duplicate entry */
	ire = ire_ftable_lookup(dst_addr, mask, gw_addr, type, ipif_arg,
	    NULL, ALL_ZONES, 0, NULL,
	    match_flags | MATCH_IRE_MASK | MATCH_IRE_GW);
	if (ire != NULL) {
		ire_refrele(gw_ire);
		ire_refrele(ire);
		return (EEXIST);
	}

	/* Security attribute exists */
	if (sp != NULL) {
		tsol_gcgrp_addr_t ga;

		/* find or create the gateway credentials group */
		ga.ga_af = AF_INET;
		IN6_IPADDR_TO_V4MAPPED(gw_addr, &ga.ga_addr);

		/* we hold reference to it upon success */
		gcgrp = gcgrp_lookup(&ga, B_TRUE);
		if (gcgrp == NULL) {
			ire_refrele(gw_ire);
			return (ENOMEM);
		}

		/*
		 * Create and add the security attribute to the group; a
		 * reference to the group is made upon allocating a new
		 * entry successfully.  If it finds an already-existing
		 * entry for the security attribute in the group, it simply
		 * returns it and no new reference is made to the group.
		 */
		gc = gc_create(sp, gcgrp, &gcgrp_xtraref);
		if (gc == NULL) {
			/* release reference held by gcgrp_lookup */
			GCGRP_REFRELE(gcgrp);
			ire_refrele(gw_ire);
			return (ENOMEM);
		}
	}

	/* Create the IRE. */
	ire = ire_create(
	    (uchar_t *)&dst_addr,		/* dest address */
	    (uchar_t *)&mask,			/* mask */
	    /* src address assigned by the caller? */
	    (uchar_t *)(((src_addr != INADDR_ANY) &&
		(flags & RTF_SETSRC)) ?  &src_addr : NULL),
	    (uchar_t *)&gw_addr,		/* gateway address */
	    NULL,				/* no in-srcaddress */
	    &gw_ire->ire_max_frag,
	    NULL,				/* no Fast Path header */
	    NULL,				/* no recv-from queue */
	    NULL,				/* no send-to queue */
	    (ushort_t)type,			/* IRE type */
	    NULL,
	    ipif_arg,
	    NULL,
	    0,
	    0,
	    0,
	    flags,
	    &gw_ire->ire_uinfo,			/* Inherit ULP info from gw */
	    gc,					/* security attribute */
	    NULL);
	/*
	 * The ire holds a reference to the 'gc' and the 'gc' holds a
	 * reference to the 'gcgrp'. We can now release the extra reference
	 * the 'gcgrp' acquired in the gcgrp_lookup, if it was not used.
	 */
	if (gcgrp_xtraref)
		GCGRP_REFRELE(gcgrp);
	if (ire == NULL) {
		if (gc != NULL)
			GC_REFRELE(gc);
		ire_refrele(gw_ire);
		return (ENOMEM);
	}

	/*
	 * POLICY: should we allow an RTF_HOST with address INADDR_ANY?
	 * SUN/OS socket stuff does but do we really want to allow 0.0.0.0?
	 */

	/* Add the new IRE. */
	error = ire_add(&ire, q, mp, func, B_FALSE);
	if (error != 0) {
		/*
		 * In the result of failure, ire_add() will have already
		 * deleted the ire in question, so there is no need to
		 * do that here.
		 */
		ire_refrele(gw_ire);
		return (error);
	}

	if (flags & RTF_MULTIRT) {
		/*
		 * Invoke the CGTP (multirouting) filtering module
		 * to add the dst address in the filtering database.
		 * Replicated inbound packets coming from that address
		 * will be filtered to discard the duplicates.
		 * It is not necessary to call the CGTP filter hook
		 * when the dst address is a broadcast or multicast,
		 * because an IP source address cannot be a broadcast
		 * or a multicast.
		 */
		ire_t *ire_dst = ire_ctable_lookup(ire->ire_addr, 0,
		    IRE_BROADCAST, NULL, ALL_ZONES, NULL, MATCH_IRE_TYPE);
		if (ire_dst != NULL) {
			ip_cgtp_bcast_add(ire, ire_dst);
			ire_refrele(ire_dst);
			goto save_ire;
		}
		if ((ip_cgtp_filter_ops != NULL) && !CLASSD(ire->ire_addr)) {
			int res = ip_cgtp_filter_ops->cfo_add_dest_v4(
			    ire->ire_addr,
			    ire->ire_gateway_addr,
			    ire->ire_src_addr,
			    gw_ire->ire_src_addr);
			if (res != 0) {
				ire_refrele(gw_ire);
				ire_delete(ire);
				return (res);
			}
		}
	}

	/*
	 * Now that the prefix IRE entry has been created, delete any
	 * existing gateway IRE cache entries as well as any IRE caches
	 * using the gateway, and force them to be created through
	 * ip_newroute.
	 */
	if (gc != NULL) {
		ASSERT(gcgrp != NULL);
		ire_clookup_delete_cache_gw(gw_addr, ALL_ZONES);
	}

save_ire:
	if (gw_ire != NULL) {
		ire_refrele(gw_ire);
	}
	/*
	 * We do not do save_ire for the routes added with RTA_SRCIFP
	 * flag. This route is only added and deleted by mipagent.
	 * So, for simplicity of design, we refrain from saving
	 * ires that are created with srcif value. This may change
	 * in future if we find more usage of srcifp feature.
	 */
	if (ipif != NULL && src_ipif == NULL) {
		/*
		 * Save enough information so that we can recreate the IRE if
		 * the interface goes down and then up.  The metrics associated
		 * with the route will be saved as well when rts_setmetrics() is
		 * called after the IRE has been created.  In the case where
		 * memory cannot be allocated, none of this information will be
		 * saved.
		 */
		ipif_save_ire(ipif, ire);
	}
	if (ioctl_msg)
		ip_rts_rtmsg(RTM_OLDADD, ire, 0);
	if (ire_arg != NULL) {
		/*
		 * Store the ire that was successfully added into where ire_arg
		 * points to so that callers don't have to look it up
		 * themselves (but they are responsible for ire_refrele()ing
		 * the ire when they are finished with it).
		 */
		*ire_arg = ire;
	} else {
		ire_refrele(ire);		/* Held in ire_add */
	}
	if (ipif_refheld)
		ipif_refrele(ipif);
	return (0);
}

/*
 * ip_rt_delete is called to delete an IPv4 route.
 * ipif_arg is passed in to associate it with the correct interface.
 * src_ipif is passed to associate the incoming interface of the packet.
 * We may need to restart this operation if the ipif cannot be looked up
 * due to an exclusive operation that is currently in progress. The restart
 * entry point is specified by 'func'
 */
/* ARGSUSED4 */
int
ip_rt_delete(ipaddr_t dst_addr, ipaddr_t mask, ipaddr_t gw_addr,
    uint_t rtm_addrs, int flags, ipif_t *ipif_arg, ipif_t *src_ipif,
    boolean_t ioctl_msg, queue_t *q, mblk_t *mp, ipsq_func_t func)
{
	ire_t	*ire = NULL;
	ipif_t	*ipif;
	boolean_t ipif_refheld = B_FALSE;
	uint_t	type;
	uint_t	match_flags = MATCH_IRE_TYPE;
	int	err = 0;

	ip1dbg(("ip_rt_delete:"));
	/*
	 * If this is the case of RTF_HOST being set, then we set the netmask
	 * to all ones.  Otherwise, we use the netmask if one was supplied.
	 */
	if (flags & RTF_HOST) {
		mask = IP_HOST_MASK;
		match_flags |= MATCH_IRE_MASK;
	} else if (rtm_addrs & RTA_NETMASK) {
		match_flags |= MATCH_IRE_MASK;
	}

	/*
	 * Note that RTF_GATEWAY is never set on a delete, therefore
	 * we check if the gateway address is one of our interfaces first,
	 * and fall back on RTF_GATEWAY routes.
	 *
	 * This makes it possible to delete an original
	 * IRE_IF_NORESOLVER/IRE_IF_RESOLVER - consistent with SunOS 4.1.
	 *
	 * As the interface index specified with the RTA_IFP sockaddr is the
	 * same for all ipif's off of an ill, the matching logic below uses
	 * MATCH_IRE_ILL if such an index was specified.  This means a route
	 * sharing the same prefix and interface index as the the route
	 * intended to be deleted might be deleted instead if a RTA_IFP sockaddr
	 * is specified in the request.
	 *
	 * On the other hand, since the gateway address will usually be
	 * different for each ipif on the system, the matching logic
	 * uses MATCH_IRE_IPIF in the case of a traditional interface
	 * route.  This means that interface routes for the same prefix can be
	 * uniquely identified if they belong to distinct ipif's and if a
	 * RTA_IFP sockaddr is not present.
	 *
	 * For more detail on specifying routes by gateway address and by
	 * interface index, see the comments in ip_rt_add().
	 * gw_addr could be zero in some cases when both RTA_SRCIFP and
	 * RTA_IFP are specified. If RTA_SRCIFP is specified and  both
	 * RTA_IFP and gateway_addr are NULL/zero, then delete will not
	 * succeed.
	 */
	if (src_ipif != NULL) {
		if (ipif_arg == NULL && gw_addr != 0) {
			ipif_arg = ipif_lookup_interface(gw_addr, dst_addr,
			    q, mp, func, &err);
			if (ipif_arg != NULL)
				ipif_refheld = B_TRUE;
		}
		if (ipif_arg == NULL) {
			err = (err == EINPROGRESS) ? err : ESRCH;
			return (err);
		}
		ipif = ipif_arg;
	} else {
		ipif = ipif_lookup_interface(gw_addr, dst_addr,
			    q, mp, func, &err);
		if (ipif != NULL)
			ipif_refheld = B_TRUE;
		else if (err == EINPROGRESS)
			return (err);
		else
			err = 0;
	}
	if (ipif != NULL) {
		if (ipif_arg != NULL) {
			if (ipif_refheld) {
				ipif_refrele(ipif);
				ipif_refheld = B_FALSE;
			}
			ipif = ipif_arg;
			match_flags |= MATCH_IRE_ILL;
		} else {
			match_flags |= MATCH_IRE_IPIF;
		}
		if (src_ipif != NULL) {
			ire = ire_srcif_table_lookup(dst_addr, IRE_INTERFACE,
			    ipif, src_ipif->ipif_ill, match_flags);
		} else {
			if (ipif->ipif_ire_type == IRE_LOOPBACK) {
				ire = ire_ctable_lookup(dst_addr, 0,
				    IRE_LOOPBACK, ipif, ALL_ZONES, NULL,
				    match_flags);
			}
			if (ire == NULL) {
				ire = ire_ftable_lookup(dst_addr, mask, 0,
				    IRE_INTERFACE, ipif, NULL, ALL_ZONES, 0,
				    NULL, match_flags);
			}
		}
	}

	if (ire == NULL) {
		/*
		 * At this point, the gateway address is not one of our own
		 * addresses or a matching interface route was not found.  We
		 * set the IRE type to lookup based on whether
		 * this is a host route, a default route or just a prefix.
		 *
		 * If an ipif_arg was passed in, then the lookup is based on an
		 * interface index so MATCH_IRE_ILL is added to match_flags.
		 * In any case, MATCH_IRE_IPIF is cleared and MATCH_IRE_GW is
		 * set as the route being looked up is not a traditional
		 * interface route.
		 * Since we do not add gateway route with srcipif, we don't
		 * expect to find it either.
		 */
		if (src_ipif != NULL) {
			if (ipif_refheld)
				ipif_refrele(ipif);
			return (ESRCH);
		} else {
			match_flags &= ~MATCH_IRE_IPIF;
			match_flags |= MATCH_IRE_GW;
			if (ipif_arg != NULL)
				match_flags |= MATCH_IRE_ILL;
			if (mask == IP_HOST_MASK)
				type = IRE_HOST;
			else if (mask == 0)
				type = IRE_DEFAULT;
			else
				type = IRE_PREFIX;
			ire = ire_ftable_lookup(dst_addr, mask, gw_addr, type,
			    ipif_arg, NULL, ALL_ZONES, 0, NULL, match_flags);
			if (ire == NULL && type == IRE_HOST) {
				ire = ire_ftable_lookup(dst_addr, mask, gw_addr,
				    IRE_HOST_REDIRECT, ipif_arg, NULL,
				    ALL_ZONES, 0, NULL, match_flags);
			}
		}
	}

	if (ipif_refheld)
		ipif_refrele(ipif);

	/* ipif is not refheld anymore */
	if (ire == NULL)
		return (ESRCH);

	if (ire->ire_flags & RTF_MULTIRT) {
		/*
		 * Invoke the CGTP (multirouting) filtering module
		 * to remove the dst address from the filtering database.
		 * Packets coming from that address will no longer be
		 * filtered to remove duplicates.
		 */
		if (ip_cgtp_filter_ops != NULL) {
			err = ip_cgtp_filter_ops->cfo_del_dest_v4(ire->ire_addr,
			    ire->ire_gateway_addr);
		}
		ip_cgtp_bcast_delete(ire);
	}

	ipif = ire->ire_ipif;
	/*
	 * Removing from ipif_saved_ire_mp is not necessary
	 * when src_ipif being non-NULL. ip_rt_add does not
	 * save the ires which src_ipif being non-NULL.
	 */
	if (ipif != NULL && src_ipif == NULL) {
		ipif_remove_ire(ipif, ire);
	}
	if (ioctl_msg)
		ip_rts_rtmsg(RTM_OLDDEL, ire, 0);
	ire_delete(ire);
	ire_refrele(ire);
	return (err);
}

/*
 * ip_siocaddrt is called to complete processing of an SIOCADDRT IOCTL.
 */
/* ARGSUSED */
int
ip_siocaddrt(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_if_req)
{
	ipaddr_t dst_addr;
	ipaddr_t gw_addr;
	ipaddr_t mask;
	int error = 0;
	mblk_t *mp1;
	struct rtentry *rt;
	ipif_t *ipif = NULL;

	ip1dbg(("ip_siocaddrt:"));
	/* Existence of mp1 verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	rt = (struct rtentry *)mp1->b_rptr;

	dst_addr = ((sin_t *)&rt->rt_dst)->sin_addr.s_addr;
	gw_addr = ((sin_t *)&rt->rt_gateway)->sin_addr.s_addr;

	/*
	 * If the RTF_HOST flag is on, this is a request to assign a gateway
	 * to a particular host address.  In this case, we set the netmask to
	 * all ones for the particular destination address.  Otherwise,
	 * determine the netmask to be used based on dst_addr and the interfaces
	 * in use.
	 */
	if (rt->rt_flags & RTF_HOST) {
		mask = IP_HOST_MASK;
	} else {
		/*
		 * Note that ip_subnet_mask returns a zero mask in the case of
		 * default (an all-zeroes address).
		 */
		mask = ip_subnet_mask(dst_addr, &ipif);
	}

	error = ip_rt_add(dst_addr, mask, gw_addr, 0, rt->rt_flags, NULL, NULL,
	    NULL, B_TRUE, q, mp, ip_process_ioctl, NULL);
	if (ipif != NULL)
		ipif_refrele(ipif);
	return (error);
}

/*
 * ip_siocdelrt is called to complete processing of an SIOCDELRT IOCTL.
 */
/* ARGSUSED */
int
ip_siocdelrt(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_if_req)
{
	ipaddr_t dst_addr;
	ipaddr_t gw_addr;
	ipaddr_t mask;
	int error;
	mblk_t *mp1;
	struct rtentry *rt;
	ipif_t *ipif = NULL;

	ip1dbg(("ip_siocdelrt:"));
	/* Existence of mp1 verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	rt = (struct rtentry *)mp1->b_rptr;

	dst_addr = ((sin_t *)&rt->rt_dst)->sin_addr.s_addr;
	gw_addr = ((sin_t *)&rt->rt_gateway)->sin_addr.s_addr;

	/*
	 * If the RTF_HOST flag is on, this is a request to delete a gateway
	 * to a particular host address.  In this case, we set the netmask to
	 * all ones for the particular destination address.  Otherwise,
	 * determine the netmask to be used based on dst_addr and the interfaces
	 * in use.
	 */
	if (rt->rt_flags & RTF_HOST) {
		mask = IP_HOST_MASK;
	} else {
		/*
		 * Note that ip_subnet_mask returns a zero mask in the case of
		 * default (an all-zeroes address).
		 */
		mask = ip_subnet_mask(dst_addr, &ipif);
	}

	error = ip_rt_delete(dst_addr, mask, gw_addr,
	    RTA_DST | RTA_GATEWAY | RTA_NETMASK, rt->rt_flags, NULL, NULL,
	    B_TRUE, q, mp, ip_process_ioctl);
	if (ipif != NULL)
		ipif_refrele(ipif);
	return (error);
}

/*
 * Enqueue the mp onto the ipsq, chained by b_next.
 * b_prev stores the function to be executed later, and b_queue the queue
 * where this mp originated.
 */
void
ipsq_enq(ipsq_t *ipsq, queue_t *q, mblk_t *mp, ipsq_func_t func, int type,
    ill_t *pending_ill)
{
	conn_t	*connp = NULL;

	ASSERT(MUTEX_HELD(&ipsq->ipsq_lock));
	ASSERT(func != NULL);

	mp->b_queue = q;
	mp->b_prev = (void *)func;
	mp->b_next = NULL;

	switch (type) {
	case CUR_OP:
		if (ipsq->ipsq_mptail != NULL) {
			ASSERT(ipsq->ipsq_mphead != NULL);
			ipsq->ipsq_mptail->b_next = mp;
		} else {
			ASSERT(ipsq->ipsq_mphead == NULL);
			ipsq->ipsq_mphead = mp;
		}
		ipsq->ipsq_mptail = mp;
		break;

	case NEW_OP:
		if (ipsq->ipsq_xopq_mptail != NULL) {
			ASSERT(ipsq->ipsq_xopq_mphead != NULL);
			ipsq->ipsq_xopq_mptail->b_next = mp;
		} else {
			ASSERT(ipsq->ipsq_xopq_mphead == NULL);
			ipsq->ipsq_xopq_mphead = mp;
		}
		ipsq->ipsq_xopq_mptail = mp;
		break;
	default:
		cmn_err(CE_PANIC, "ipsq_enq %d type \n", type);
	}

	if (CONN_Q(q) && pending_ill != NULL) {
		connp = Q_TO_CONN(q);

		ASSERT(MUTEX_HELD(&connp->conn_lock));
		connp->conn_oper_pending_ill = pending_ill;
	}
}

/*
 * Return the mp at the head of the ipsq. After emptying the ipsq
 * look at the next ioctl, if this ioctl is complete. Otherwise
 * return, we will resume when we complete the current ioctl.
 * The current ioctl will wait till it gets a response from the
 * driver below.
 */
static mblk_t *
ipsq_dq(ipsq_t *ipsq)
{
	mblk_t	*mp;

	ASSERT(MUTEX_HELD(&ipsq->ipsq_lock));

	mp = ipsq->ipsq_mphead;
	if (mp != NULL) {
		ipsq->ipsq_mphead = mp->b_next;
		if (ipsq->ipsq_mphead == NULL)
			ipsq->ipsq_mptail = NULL;
		mp->b_next = NULL;
		return (mp);
	}
	if (ipsq->ipsq_current_ipif != NULL)
		return (NULL);
	mp = ipsq->ipsq_xopq_mphead;
	if (mp != NULL) {
		ipsq->ipsq_xopq_mphead = mp->b_next;
		if (ipsq->ipsq_xopq_mphead == NULL)
			ipsq->ipsq_xopq_mptail = NULL;
		mp->b_next = NULL;
		return (mp);
	}
	return (NULL);
}

/*
 * Enter the ipsq corresponding to ill, by waiting synchronously till
 * we can enter the ipsq exclusively. Unless 'force' is used, the ipsq
 * will have to drain completely before ipsq_enter returns success.
 * ipsq_current_ipif will be set if some exclusive ioctl is in progress,
 * and the ipsq_exit logic will start the next enqueued ioctl after
 * completion of the current ioctl. If 'force' is used, we don't wait
 * for the enqueued ioctls. This is needed when a conn_close wants to
 * enter the ipsq and abort an ioctl that is somehow stuck. Unplumb
 * of an ill can also use this option. But we dont' use it currently.
 */
#define	ENTER_SQ_WAIT_TICKS 100
boolean_t
ipsq_enter(ill_t *ill, boolean_t force)
{
	ipsq_t	*ipsq;
	boolean_t waited_enough = B_FALSE;

	/*
	 * Holding the ill_lock prevents <ill-ipsq> assocs from changing.
	 * Since the <ill-ipsq> assocs could change while we wait for the
	 * writer, it is easier to wait on a fixed global rather than try to
	 * cv_wait on a changing ipsq.
	 */
	mutex_enter(&ill->ill_lock);
	for (;;) {
		if (ill->ill_state_flags & ILL_CONDEMNED) {
			mutex_exit(&ill->ill_lock);
			return (B_FALSE);
		}

		ipsq = ill->ill_phyint->phyint_ipsq;
		mutex_enter(&ipsq->ipsq_lock);
		if (ipsq->ipsq_writer == NULL &&
		    (ipsq->ipsq_current_ipif == NULL || waited_enough)) {
			break;
		} else if (ipsq->ipsq_writer != NULL) {
			mutex_exit(&ipsq->ipsq_lock);
			cv_wait(&ill->ill_cv, &ill->ill_lock);
		} else {
			mutex_exit(&ipsq->ipsq_lock);
			if (force) {
				(void) cv_timedwait(&ill->ill_cv,
				    &ill->ill_lock,
				    lbolt + ENTER_SQ_WAIT_TICKS);
				waited_enough = B_TRUE;
				continue;
			} else {
				cv_wait(&ill->ill_cv, &ill->ill_lock);
			}
		}
	}

	ASSERT(ipsq->ipsq_mphead == NULL && ipsq->ipsq_mptail == NULL);
	ASSERT(ipsq->ipsq_reentry_cnt == 0);
	ipsq->ipsq_writer = curthread;
	ipsq->ipsq_reentry_cnt++;
#ifdef ILL_DEBUG
	ipsq->ipsq_depth = getpcstack(ipsq->ipsq_stack, IP_STACK_DEPTH);
#endif
	mutex_exit(&ipsq->ipsq_lock);
	mutex_exit(&ill->ill_lock);
	return (B_TRUE);
}

/*
 * The ipsq_t (ipsq) is the synchronization data structure used to serialize
 * certain critical operations like plumbing (i.e. most set ioctls),
 * multicast joins, igmp/mld timers, IPMP operations etc. On a non-IPMP
 * system there is 1 ipsq per phyint. On an IPMP system there is 1 ipsq per
 * IPMP group. The ipsq serializes exclusive ioctls issued by applications
 * on a per ipsq basis in ipsq_xopq_mphead. It also protects against multiple
 * threads executing in the ipsq. Responses from the driver pertain to the
 * current ioctl (say a DL_BIND_ACK in response to a DL_BIND_REQUEST initiated
 * as part of bringing up the interface) and are enqueued in ipsq_mphead.
 *
 * If a thread does not want to reenter the ipsq when it is already writer,
 * it must make sure that the specified reentry point to be called later
 * when the ipsq is empty, nor any code path starting from the specified reentry
 * point must never ever try to enter the ipsq again. Otherwise it can lead
 * to an infinite loop. The reentry point ip_rput_dlpi_writer is an example.
 * When the thread that is currently exclusive finishes, it (ipsq_exit)
 * dequeues the requests waiting to become exclusive in ipsq_mphead and calls
 * the reentry point. When the list at ipsq_mphead becomes empty ipsq_exit
 * proceeds to dequeue the next ioctl in ipsq_xopq_mphead and start the next
 * ioctl if the current ioctl has completed. If the current ioctl is still
 * in progress it simply returns. The current ioctl could be waiting for
 * a response from another module (arp_ or the driver or could be waiting for
 * the ipif/ill/ire refcnts to drop to zero. In such a case the ipsq_pending_mp
 * and ipsq_pending_ipif are set. ipsq_current_ipif is set throughout the
 * execution of the ioctl and ipsq_exit does not start the next ioctl unless
 * ipsq_current_ipif is clear which happens only on ioctl completion.
 */

/*
 * Try to enter the ipsq exclusively, corresponding to ipif or ill. (only 1 of
 * ipif or ill can be specified). The caller ensures ipif or ill is valid by
 * ref-holding it if necessary. If the ipsq cannot be entered, the mp is queued
 * completion.
 */
ipsq_t *
ipsq_try_enter(ipif_t *ipif, ill_t *ill, queue_t *q, mblk_t *mp,
    ipsq_func_t func, int type, boolean_t reentry_ok)
{
	ipsq_t	*ipsq;

	/* Only 1 of ipif or ill can be specified */
	ASSERT((ipif != NULL) ^ (ill != NULL));
	if (ipif != NULL)
		ill = ipif->ipif_ill;

	/*
	 * lock ordering ill_g_lock -> conn_lock -> ill_lock -> ipsq_lock
	 * ipsq of an ill can't change when ill_lock is held.
	 */
	GRAB_CONN_LOCK(q);
	mutex_enter(&ill->ill_lock);
	ipsq = ill->ill_phyint->phyint_ipsq;
	mutex_enter(&ipsq->ipsq_lock);

	/*
	 * 1. Enter the ipsq if we are already writer and reentry is ok.
	 *    (Note: If the caller does not specify reentry_ok then neither
	 *    'func' nor any of its callees must ever attempt to enter the ipsq
	 *    again. Otherwise it can lead to an infinite loop
	 * 2. Enter the ipsq if there is no current writer and this attempted
	 *    entry is part of the current ioctl or operation
	 * 3. Enter the ipsq if there is no current writer and this is a new
	 *    ioctl (or operation) and the ioctl (or operation) queue is
	 *    empty and there is no ioctl (or operation) currently in progress
	 */
	if ((ipsq->ipsq_writer == NULL && ((type == CUR_OP) ||
	    (type == NEW_OP && ipsq->ipsq_xopq_mphead == NULL &&
	    ipsq->ipsq_current_ipif == NULL))) ||
	    (ipsq->ipsq_writer == curthread && reentry_ok)) {
		/* Success. */
		ipsq->ipsq_reentry_cnt++;
		ipsq->ipsq_writer = curthread;
		mutex_exit(&ipsq->ipsq_lock);
		mutex_exit(&ill->ill_lock);
		RELEASE_CONN_LOCK(q);
#ifdef ILL_DEBUG
		ipsq->ipsq_depth = getpcstack(ipsq->ipsq_stack, IP_STACK_DEPTH);
#endif
		return (ipsq);
	}

	ipsq_enq(ipsq, q, mp, func, type, ill);

	mutex_exit(&ipsq->ipsq_lock);
	mutex_exit(&ill->ill_lock);
	RELEASE_CONN_LOCK(q);
	return (NULL);
}

/*
 * Try to enter the ipsq exclusively, corresponding to ipif or ill. (only 1 of
 * ipif or ill can be specified). The caller ensures ipif or ill is valid by
 * ref-holding it if necessary. If the ipsq cannot be entered, the mp is queued
 * completion.
 *
 * This function does a refrele on the ipif/ill.
 */
void
qwriter_ip(ipif_t *ipif, ill_t *ill, queue_t *q, mblk_t *mp,
    ipsq_func_t func, int type, boolean_t reentry_ok)
{
	ipsq_t	*ipsq;

	ipsq = ipsq_try_enter(ipif, ill, q, mp, func, type, reentry_ok);
	/*
	 * Caller must have done a refhold on the ipif. ipif_refrele
	 * happens on the passed ipif. We can do this since we are
	 * already exclusive, or we won't access ipif henceforth, Both
	 * this func and caller will just return if we ipsq_try_enter
	 * fails above. This is needed because func needs to
	 * see the correct refcount. Eg. removeif can work only then.
	 */
	if (ipif != NULL)
		ipif_refrele(ipif);
	else
		ill_refrele(ill);
	if (ipsq != NULL) {
		(*func)(ipsq, q, mp, NULL);
		ipsq_exit(ipsq, B_TRUE, B_TRUE);
	}
}

/*
 * If there are more than ILL_GRP_CNT ills in a group,
 * we use kmem alloc'd buffers, else use the stack
 */
#define	ILL_GRP_CNT	14
/*
 * Drain the ipsq, if there are messages on it, and then leave the ipsq.
 * Called by a thread that is currently exclusive on this ipsq.
 */
void
ipsq_exit(ipsq_t *ipsq, boolean_t start_igmp_timer, boolean_t start_mld_timer)
{
	queue_t	*q;
	mblk_t	*mp;
	ipsq_func_t	func;
	int	next;
	ill_t	**ill_list = NULL;
	size_t	ill_list_size = 0;
	int	cnt = 0;
	boolean_t need_ipsq_free = B_FALSE;

	ASSERT(IAM_WRITER_IPSQ(ipsq));
	mutex_enter(&ipsq->ipsq_lock);
	ASSERT(ipsq->ipsq_reentry_cnt >= 1);
	if (ipsq->ipsq_reentry_cnt != 1) {
		ipsq->ipsq_reentry_cnt--;
		mutex_exit(&ipsq->ipsq_lock);
		return;
	}

	mp = ipsq_dq(ipsq);
	while (mp != NULL) {
again:
		mutex_exit(&ipsq->ipsq_lock);
		func = (ipsq_func_t)mp->b_prev;
		q = (queue_t *)mp->b_queue;
		mp->b_prev = NULL;
		mp->b_queue = NULL;

		/*
		 * If 'q' is an conn queue, it is valid, since we did a
		 * a refhold on the connp, at the start of the ioctl.
		 * If 'q' is an ill queue, it is valid, since close of an
		 * ill will clean up the 'ipsq'.
		 */
		(*func)(ipsq, q, mp, NULL);

		mutex_enter(&ipsq->ipsq_lock);
		mp = ipsq_dq(ipsq);
	}

	mutex_exit(&ipsq->ipsq_lock);

	/*
	 * Need to grab the locks in the right order. Need to
	 * atomically check (under ipsq_lock) that there are no
	 * messages before relinquishing the ipsq. Also need to
	 * atomically wakeup waiters on ill_cv while holding ill_lock.
	 * Holding ill_g_lock ensures that ipsq list of ills is stable.
	 * If we need to call ill_split_ipsq and change <ill-ipsq> we need
	 * to grab ill_g_lock as writer.
	 */
	rw_enter(&ill_g_lock, ipsq->ipsq_split ? RW_WRITER : RW_READER);

	/* ipsq_refs can't change while ill_g_lock is held as reader */
	if (ipsq->ipsq_refs != 0) {
		/* At most 2 ills v4/v6 per phyint */
		cnt = ipsq->ipsq_refs << 1;
		ill_list_size = cnt * sizeof (ill_t *);
		/*
		 * If memory allocation fails, we will do the split
		 * the next time ipsq_exit is called for whatever reason.
		 * As long as the ipsq_split flag is set the need to
		 * split is remembered.
		 */
		ill_list = kmem_zalloc(ill_list_size, KM_NOSLEEP);
		if (ill_list != NULL)
			cnt = ill_lock_ipsq_ills(ipsq, ill_list, cnt);
	}
	mutex_enter(&ipsq->ipsq_lock);
	mp = ipsq_dq(ipsq);
	if (mp != NULL) {
		/* oops, some message has landed up, we can't get out */
		if (ill_list != NULL)
			ill_unlock_ills(ill_list, cnt);
		rw_exit(&ill_g_lock);
		if (ill_list != NULL)
			kmem_free(ill_list, ill_list_size);
		ill_list = NULL;
		ill_list_size = 0;
		cnt = 0;
		goto again;
	}

	/*
	 * Split only if no ioctl is pending and if memory alloc succeeded
	 * above.
	 */
	if (ipsq->ipsq_split && ipsq->ipsq_current_ipif == NULL &&
		ill_list != NULL) {
		/*
		 * No new ill can join this ipsq since we are holding the
		 * ill_g_lock. Hence ill_split_ipsq can safely traverse the
		 * ipsq. ill_split_ipsq may fail due to memory shortage.
		 * If so we will retry on the next ipsq_exit.
		 */
		ipsq->ipsq_split = ill_split_ipsq(ipsq);
	}

	/*
	 * We are holding the ipsq lock, hence no new messages can
	 * land up on the ipsq, and there are no messages currently.
	 * Now safe to get out. Wake up waiters and relinquish ipsq
	 * atomically while holding ill locks.
	 */
	ipsq->ipsq_writer = NULL;
	ipsq->ipsq_reentry_cnt--;
	ASSERT(ipsq->ipsq_reentry_cnt == 0);
#ifdef ILL_DEBUG
	ipsq->ipsq_depth = 0;
#endif
	mutex_exit(&ipsq->ipsq_lock);
	/*
	 * For IPMP this should wake up all ills in this ipsq.
	 * We need to hold the ill_lock while waking up waiters to
	 * avoid missed wakeups. But there is no need to acquire all
	 * the ill locks and then wakeup. If we have not acquired all
	 * the locks (due to memory failure above) ill_signal_ipsq_ills
	 * wakes up ills one at a time after getting the right ill_lock
	 */
	ill_signal_ipsq_ills(ipsq, ill_list != NULL);
	if (ill_list != NULL)
		ill_unlock_ills(ill_list, cnt);
	if (ipsq->ipsq_refs == 0)
		need_ipsq_free = B_TRUE;
	rw_exit(&ill_g_lock);
	if (ill_list != 0)
		kmem_free(ill_list, ill_list_size);

	if (need_ipsq_free) {
		/*
		 * Free the ipsq. ipsq_refs can't increase because ipsq can't be
		 * looked up. ipsq can be looked up only thru ill or phyint
		 * and there are no ills/phyint on this ipsq.
		 */
		ipsq_delete(ipsq);
	}
	/*
	 * Now start any igmp or mld timers that could not be started
	 * while inside the ipsq. The timers can't be started while inside
	 * the ipsq, since igmp_start_timers may need to call untimeout()
	 * which can't be done while holding a lock i.e. the ipsq. Otherwise
	 * there could be a deadlock since the timeout handlers
	 * mld_timeout_handler / igmp_timeout_handler also synchronously
	 * wait in ipsq_enter() trying to get the ipsq.
	 *
	 * However there is one exception to the above. If this thread is
	 * itself the igmp/mld timeout handler thread, then we don't want
	 * to start any new timer until the current handler is done. The
	 * handler thread passes in B_FALSE for start_igmp/mld_timers, while
	 * all others pass B_TRUE.
	 */
	if (start_igmp_timer) {
		mutex_enter(&igmp_timer_lock);
		next = igmp_deferred_next;
		igmp_deferred_next = INFINITY;
		mutex_exit(&igmp_timer_lock);

		if (next != INFINITY)
			igmp_start_timers(next);
	}

	if (start_mld_timer) {
		mutex_enter(&mld_timer_lock);
		next = mld_deferred_next;
		mld_deferred_next = INFINITY;
		mutex_exit(&mld_timer_lock);

		if (next != INFINITY)
			mld_start_timers(next);
	}
}

/*
 * The ill is closing. Flush all messages on the ipsq that originated
 * from this ill. Usually there wont' be any messages on the ipsq_xopq_mphead
 * for this ill since ipsq_enter could not have entered until then.
 * New messages can't be queued since the CONDEMNED flag is set.
 */
static void
ipsq_flush(ill_t *ill)
{
	queue_t	*q;
	mblk_t	*prev;
	mblk_t	*mp;
	mblk_t	*mp_next;
	ipsq_t	*ipsq;

	ASSERT(IAM_WRITER_ILL(ill));
	ipsq = ill->ill_phyint->phyint_ipsq;
	/*
	 * Flush any messages sent up by the driver.
	 */
	mutex_enter(&ipsq->ipsq_lock);
	for (prev = NULL, mp = ipsq->ipsq_mphead; mp != NULL; mp = mp_next) {
		mp_next = mp->b_next;
		q = mp->b_queue;
		if (q == ill->ill_rq || q == ill->ill_wq) {
			/* Remove the mp from the ipsq */
			if (prev == NULL)
				ipsq->ipsq_mphead = mp->b_next;
			else
				prev->b_next = mp->b_next;
			if (ipsq->ipsq_mptail == mp) {
				ASSERT(mp_next == NULL);
				ipsq->ipsq_mptail = prev;
			}
			inet_freemsg(mp);
		} else {
			prev = mp;
		}
	}
	mutex_exit(&ipsq->ipsq_lock);
	(void) ipsq_pending_mp_cleanup(ill, NULL);
	ipsq_xopq_mp_cleanup(ill, NULL);
	ill_pending_mp_cleanup(ill);
}

/*
 * Clean up one squeue element. ill_inuse_ref is protected by ill_lock.
 * The real cleanup happens behind the squeue via ip_squeue_clean function but
 * we need to protect ourselfs from 2 threads trying to cleanup at the same
 * time (possible with one port going down for aggr and someone tearing down the
 * entire aggr simultaneously. So we use ill_inuse_ref protected by ill_lock
 * to indicate when the cleanup has started (1 ref) and when the cleanup
 * is done (0 ref). When a new ring gets assigned to squeue, we start by
 * putting 2 ref on ill_inuse_ref.
 */
static void
ipsq_clean_ring(ill_t *ill, ill_rx_ring_t *rx_ring)
{
	conn_t *connp;
	squeue_t *sqp;
	mblk_t *mp;

	ASSERT(rx_ring != NULL);

	/* Just clean one squeue */
	mutex_enter(&ill->ill_lock);
	/*
	 * Reset the ILL_SOFT_RING_ASSIGN bit so that
	 * ip_squeue_soft_ring_affinty() will not go
	 * ahead with assigning rings.
	 */
	ill->ill_state_flags &= ~ILL_SOFT_RING_ASSIGN;
	while (rx_ring->rr_ring_state == ILL_RING_INPROC)
		/* Some operations pending on the ring. Wait */
		cv_wait(&ill->ill_cv, &ill->ill_lock);

	if (rx_ring->rr_ring_state != ILL_RING_INUSE) {
		/*
		 * Someone already trying to clean
		 * this squeue or its already been cleaned.
		 */
		mutex_exit(&ill->ill_lock);
		return;
	}
	sqp = rx_ring->rr_sqp;

	if (sqp == NULL) {
		/*
		 * The rx_ring never had a squeue assigned to it.
		 * We are under ill_lock so we can clean it up
		 * here itself since no one can get to it.
		 */
		rx_ring->rr_blank = NULL;
		rx_ring->rr_handle = NULL;
		rx_ring->rr_sqp = NULL;
		rx_ring->rr_ring_state = ILL_RING_FREE;
		mutex_exit(&ill->ill_lock);
		return;
	}

	/* Set the state that its being cleaned */
	rx_ring->rr_ring_state = ILL_RING_BEING_FREED;
	ASSERT(sqp != NULL);
	mutex_exit(&ill->ill_lock);

	/*
	 * Use the preallocated ill_unbind_conn for this purpose
	 */
	connp = ill->ill_dls_capab->ill_unbind_conn;
	mp = &connp->conn_tcp->tcp_closemp;
	CONN_INC_REF(connp);
	squeue_enter(sqp, mp, ip_squeue_clean, connp, NULL);

	mutex_enter(&ill->ill_lock);
	while (rx_ring->rr_ring_state != ILL_RING_FREE)
		cv_wait(&ill->ill_cv, &ill->ill_lock);

	mutex_exit(&ill->ill_lock);
}

static void
ipsq_clean_all(ill_t *ill)
{
	int idx;

	/*
	 * No need to clean if poll_capab isn't set for this ill
	 */
	if (!(ill->ill_capabilities & (ILL_CAPAB_POLL|ILL_CAPAB_SOFT_RING)))
		return;

	for (idx = 0; idx < ILL_MAX_RINGS; idx++) {
		ill_rx_ring_t *ipr = &ill->ill_dls_capab->ill_ring_tbl[idx];
		ipsq_clean_ring(ill, ipr);
	}

	ill->ill_capabilities &= ~(ILL_CAPAB_POLL|ILL_CAPAB_SOFT_RING);
}

/* ARGSUSED */
int
ip_sioctl_slifoindex(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	ill_t	*ill;
	struct lifreq	*lifr = (struct lifreq *)ifreq;
	boolean_t isv6;
	conn_t	*connp;

	connp = Q_TO_CONN(q);
	isv6 = connp->conn_af_isv6;
	/*
	 * Set original index.
	 * Failover and failback move logical interfaces
	 * from one physical interface to another.  The
	 * original index indicates the parent of a logical
	 * interface, in other words, the physical interface
	 * the logical interface will be moved back to on
	 * failback.
	 */

	/*
	 * Don't allow the original index to be changed
	 * for non-failover addresses, autoconfigured
	 * addresses, or IPv6 link local addresses.
	 */
	if (((ipif->ipif_flags & (IPIF_NOFAILOVER | IPIF_ADDRCONF)) != NULL) ||
	    (isv6 && IN6_IS_ADDR_LINKLOCAL(&ipif->ipif_v6lcl_addr))) {
		return (EINVAL);
	}
	/*
	 * The new original index must be in use by some
	 * physical interface.
	 */
	ill = ill_lookup_on_ifindex(lifr->lifr_index, isv6, NULL, NULL,
	    NULL, NULL);
	if (ill == NULL)
		return (ENXIO);
	ill_refrele(ill);

	ipif->ipif_orig_ifindex = lifr->lifr_index;
	/*
	 * When this ipif gets failed back, don't
	 * preserve the original id, as it is no
	 * longer applicable.
	 */
	ipif->ipif_orig_ipifid = 0;
	/*
	 * For IPv4, change the original index of any
	 * multicast addresses associated with the
	 * ipif to the new value.
	 */
	if (!isv6) {
		ilm_t *ilm;

		mutex_enter(&ipif->ipif_ill->ill_lock);
		for (ilm = ipif->ipif_ill->ill_ilm; ilm != NULL;
		    ilm = ilm->ilm_next) {
			if (ilm->ilm_ipif == ipif) {
				ilm->ilm_orig_ifindex = lifr->lifr_index;
			}
		}
		mutex_exit(&ipif->ipif_ill->ill_lock);
	}
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_oindex(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifreq *lifr = (struct lifreq *)ifreq;

	/*
	 * Get the original interface index i.e the one
	 * before FAILOVER if it ever happened.
	 */
	lifr->lifr_index = ipif->ipif_orig_ifindex;
	return (0);
}

/*
 * Parse an iftun_req structure coming down SIOC[GS]TUNPARAM ioctls,
 * refhold and return the associated ipif
 */
int
ip_extract_tunreq(queue_t *q, mblk_t *mp, ipif_t **ipifp, ipsq_func_t func)
{
	boolean_t exists;
	struct iftun_req *ta;
	ipif_t	*ipif;
	ill_t	*ill;
	boolean_t isv6;
	mblk_t	*mp1;
	int	error;
	conn_t	*connp;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	ta = (struct iftun_req *)mp1->b_rptr;
	/*
	 * Null terminate the string to protect against buffer
	 * overrun. String was generated by user code and may not
	 * be trusted.
	 */
	ta->ifta_lifr_name[LIFNAMSIZ - 1] = '\0';

	connp = Q_TO_CONN(q);
	isv6 = connp->conn_af_isv6;

	/* Disallows implicit create */
	ipif = ipif_lookup_on_name(ta->ifta_lifr_name,
	    mi_strlen(ta->ifta_lifr_name), B_FALSE, &exists, isv6,
	    connp->conn_zoneid, CONNP_TO_WQ(connp), mp, func, &error);
	if (ipif == NULL)
		return (error);

	if (ipif->ipif_id != 0) {
		/*
		 * We really don't want to set/get tunnel parameters
		 * on virtual tunnel interfaces.  Only allow the
		 * base tunnel to do these.
		 */
		ipif_refrele(ipif);
		return (EINVAL);
	}

	/*
	 * Send down to tunnel mod for ioctl processing.
	 * Will finish ioctl in ip_rput_other().
	 */
	ill = ipif->ipif_ill;
	if (ill->ill_net_type == IRE_LOOPBACK) {
		ipif_refrele(ipif);
		return (EOPNOTSUPP);
	}

	if (ill->ill_wq == NULL) {
		ipif_refrele(ipif);
		return (ENXIO);
	}
	/*
	 * Mark the ioctl as coming from an IPv6 interface for
	 * tun's convenience.
	 */
	if (ill->ill_isv6)
		ta->ifta_flags |= 0x80000000;
	*ipifp = ipif;
	return (0);
}

/*
 * Parse an ifreq or lifreq struct coming down ioctls and refhold
 * and return the associated ipif.
 * Return value:
 *	Non zero: An error has occurred. ci may not be filled out.
 *	zero : ci is filled out with the ioctl cmd in ci.ci_name, and
 *	a held ipif in ci.ci_ipif.
 */
int
ip_extract_lifreq_cmn(queue_t *q, mblk_t *mp, int cmd_type, int flags,
    cmd_info_t *ci, ipsq_func_t func)
{
	sin_t		*sin;
	sin6_t		*sin6;
	char		*name;
	struct ifreq    *ifr;
	struct lifreq    *lifr;
	ipif_t		*ipif = NULL;
	ill_t		*ill;
	conn_t		*connp;
	boolean_t	isv6;
	struct iocblk   *iocp = (struct iocblk *)mp->b_rptr;
	boolean_t	exists;
	int		err;
	mblk_t		*mp1;
	zoneid_t	zoneid;

	if (q->q_next != NULL) {
		ill = (ill_t *)q->q_ptr;
		isv6 = ill->ill_isv6;
		connp = NULL;
		zoneid = ALL_ZONES;
	} else {
		ill = NULL;
		connp = Q_TO_CONN(q);
		isv6 = connp->conn_af_isv6;
		zoneid = connp->conn_zoneid;
		if (zoneid == GLOBAL_ZONEID) {
			/* global zone can access ipifs in all zones */
			zoneid = ALL_ZONES;
		}
	}

	/* Has been checked in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;


	if (cmd_type == IF_CMD) {
		/* This a old style SIOC[GS]IF* command */
		ifr = (struct ifreq *)mp1->b_rptr;
		/*
		 * Null terminate the string to protect against buffer
		 * overrun. String was generated by user code and may not
		 * be trusted.
		 */
		ifr->ifr_name[IFNAMSIZ - 1] = '\0';
		sin = (sin_t *)&ifr->ifr_addr;
		name = ifr->ifr_name;
		ci->ci_sin = sin;
		ci->ci_sin6 = NULL;
		ci->ci_lifr = (struct lifreq *)ifr;
	} else {
		/* This a new style SIOC[GS]LIF* command */
		ASSERT(cmd_type == LIF_CMD);
		lifr = (struct lifreq *)mp1->b_rptr;
		/*
		 * Null terminate the string to protect against buffer
		 * overrun. String was generated by user code and may not
		 * be trusted.
		 */
		lifr->lifr_name[LIFNAMSIZ - 1] = '\0';
		name = lifr->lifr_name;
		sin = (sin_t *)&lifr->lifr_addr;
		sin6 = (sin6_t *)&lifr->lifr_addr;
		if (iocp->ioc_cmd == SIOCSLIFGROUPNAME) {
			(void) strncpy(ci->ci_groupname, lifr->lifr_groupname,
			    LIFNAMSIZ);
		}
		ci->ci_sin = sin;
		ci->ci_sin6 = sin6;
		ci->ci_lifr = lifr;
	}


	if (iocp->ioc_cmd == SIOCSLIFNAME) {
		/*
		 * The ioctl will be failed if the ioctl comes down
		 * an conn stream
		 */
		if (ill == NULL) {
			/*
			 * Not an ill queue, return EINVAL same as the
			 * old error code.
			 */
			return (ENXIO);
		}
		ipif = ill->ill_ipif;
		ipif_refhold(ipif);
	} else {
		ipif = ipif_lookup_on_name(name, mi_strlen(name), B_FALSE,
		    &exists, isv6, zoneid,
		    (connp == NULL) ? q : CONNP_TO_WQ(connp), mp, func, &err);
		if (ipif == NULL) {
			if (err == EINPROGRESS)
				return (err);
			if (iocp->ioc_cmd == SIOCLIFFAILOVER ||
			    iocp->ioc_cmd == SIOCLIFFAILBACK) {
				/*
				 * Need to try both v4 and v6 since this
				 * ioctl can come down either v4 or v6
				 * socket. The lifreq.lifr_family passed
				 * down by this ioctl is AF_UNSPEC.
				 */
				ipif = ipif_lookup_on_name(name,
				    mi_strlen(name), B_FALSE, &exists, !isv6,
				    zoneid, (connp == NULL) ? q :
				    CONNP_TO_WQ(connp), mp, func, &err);
				if (err == EINPROGRESS)
					return (err);
			}
			err = 0;	/* Ensure we don't use it below */
		}
	}

	/*
	 * Old style [GS]IFCMD does not admit IPv6 ipif
	 */
	if (ipif != NULL && ipif->ipif_isv6 && cmd_type == IF_CMD) {
		ipif_refrele(ipif);
		return (ENXIO);
	}

	if (ipif == NULL && ill != NULL && ill->ill_ipif != NULL &&
	    name[0] == '\0') {
		/*
		 * Handle a or a SIOC?IF* with a null name
		 * during plumb (on the ill queue before the I_PLINK).
		 */
		ipif = ill->ill_ipif;
		ipif_refhold(ipif);
	}

	if (ipif == NULL)
		return (ENXIO);

	/*
	 * Allow only GET operations if this ipif has been created
	 * temporarily due to a MOVE operation.
	 */
	if (ipif->ipif_replace_zero && !(flags & IPI_REPL)) {
		ipif_refrele(ipif);
		return (EINVAL);
	}

	ci->ci_ipif = ipif;
	return (0);
}

/*
 * Return the total number of ipifs.
 */
static uint_t
ip_get_numifs(zoneid_t zoneid)
{
	uint_t numifs = 0;
	ill_t	*ill;
	ill_walk_context_t	ctx;
	ipif_t	*ipif;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_V4(&ctx);

	while (ill != NULL) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (ipif->ipif_zoneid == zoneid ||
			    ipif->ipif_zoneid == ALL_ZONES)
				numifs++;
		}
		ill = ill_next(&ctx, ill);
	}
	rw_exit(&ill_g_lock);
	return (numifs);
}

/*
 * Return the total number of ipifs.
 */
static uint_t
ip_get_numlifs(int family, int lifn_flags, zoneid_t zoneid)
{
	uint_t numifs = 0;
	ill_t	*ill;
	ipif_t	*ipif;
	ill_walk_context_t	ctx;

	ip1dbg(("ip_get_numlifs(%d %u %d)\n", family, lifn_flags, (int)zoneid));

	rw_enter(&ill_g_lock, RW_READER);
	if (family == AF_INET)
		ill = ILL_START_WALK_V4(&ctx);
	else if (family == AF_INET6)
		ill = ILL_START_WALK_V6(&ctx);
	else
		ill = ILL_START_WALK_ALL(&ctx);

	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if ((ipif->ipif_flags & IPIF_NOXMIT) &&
			    !(lifn_flags & LIFC_NOXMIT))
				continue;
			if ((ipif->ipif_flags & IPIF_TEMPORARY) &&
			    !(lifn_flags & LIFC_TEMPORARY))
				continue;
			if (((ipif->ipif_flags &
			    (IPIF_NOXMIT|IPIF_NOLOCAL|
			    IPIF_DEPRECATED)) ||
			    (ill->ill_phyint->phyint_flags &
			    PHYI_LOOPBACK) ||
			    !(ipif->ipif_flags & IPIF_UP)) &&
			    (lifn_flags & LIFC_EXTERNAL_SOURCE))
				continue;

			if (zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES &&
			    (zoneid != GLOBAL_ZONEID ||
			    !(lifn_flags & LIFC_ALLZONES)))
				continue;

			numifs++;
		}
	}
	rw_exit(&ill_g_lock);
	return (numifs);
}

uint_t
ip_get_lifsrcofnum(ill_t *ill)
{
	uint_t numifs = 0;
	ill_t	*ill_head = ill;

	/*
	 * ill_g_usesrc_lock protects ill_usesrc_grp_next, for example, some
	 * other thread may be trying to relink the ILLs in this usesrc group
	 * and adjusting the ill_usesrc_grp_next pointers
	 */
	rw_enter(&ill_g_usesrc_lock, RW_READER);
	if ((ill->ill_usesrc_ifindex == 0) &&
	    (ill->ill_usesrc_grp_next != NULL)) {
		for (; (ill != NULL) && (ill->ill_usesrc_grp_next != ill_head);
		    ill = ill->ill_usesrc_grp_next)
			numifs++;
	}
	rw_exit(&ill_g_usesrc_lock);

	return (numifs);
}

/* Null values are passed in for ipif, sin, and ifreq */
/* ARGSUSED */
int
ip_sioctl_get_ifnum(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	int *nump;

	ASSERT(q->q_next == NULL); /* not a valid ioctl for ip as a module */

	/* Existence of b_cont->b_cont checked in ip_wput_nondata */
	nump = (int *)mp->b_cont->b_cont->b_rptr;

	*nump = ip_get_numifs(Q_TO_CONN(q)->conn_zoneid);
	ip1dbg(("ip_sioctl_get_ifnum numifs %d", *nump));
	return (0);
}

/* Null values are passed in for ipif, sin, and ifreq */
/* ARGSUSED */
int
ip_sioctl_get_lifnum(ipif_t *dummy_ipif, sin_t *dummy_sin,
    queue_t *q, mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifnum *lifn;
	mblk_t	*mp1;

	ASSERT(q->q_next == NULL); /* not a valid ioctl for ip as a module */

	/* Existence checked in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;

	lifn = (struct lifnum *)mp1->b_rptr;
	switch (lifn->lifn_family) {
	case AF_UNSPEC:
	case AF_INET:
	case AF_INET6:
		break;
	default:
		return (EAFNOSUPPORT);
	}

	lifn->lifn_count = ip_get_numlifs(lifn->lifn_family, lifn->lifn_flags,
	    Q_TO_CONN(q)->conn_zoneid);
	ip1dbg(("ip_sioctl_get_lifnum numifs %d", lifn->lifn_count));
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_ifconf(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	STRUCT_HANDLE(ifconf, ifc);
	mblk_t *mp1;
	struct iocblk *iocp;
	struct ifreq *ifr;
	ill_walk_context_t	ctx;
	ill_t	*ill;
	ipif_t	*ipif;
	struct sockaddr_in *sin;
	int32_t	ifclen;
	zoneid_t zoneid;

	ASSERT(q->q_next == NULL); /* not valid ioctls for ip as a module */

	ip1dbg(("ip_sioctl_get_ifconf"));
	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	iocp = (struct iocblk *)mp->b_rptr;
	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/*
	 * The original SIOCGIFCONF passed in a struct ifconf which specified
	 * the user buffer address and length into which the list of struct
	 * ifreqs was to be copied.  Since AT&T Streams does not seem to
	 * allow M_COPYOUT to be used in conjunction with I_STR IOCTLS,
	 * the SIOCGIFCONF operation was redefined to simply provide
	 * a large output buffer into which we are supposed to jam the ifreq
	 * array.  The same ioctl command code was used, despite the fact that
	 * both the applications and the kernel code had to change, thus making
	 * it impossible to support both interfaces.
	 *
	 * For reasons not good enough to try to explain, the following
	 * algorithm is used for deciding what to do with one of these:
	 * If the IOCTL comes in as an I_STR, it is assumed to be of the new
	 * form with the output buffer coming down as the continuation message.
	 * If it arrives as a TRANSPARENT IOCTL, it is assumed to be old style,
	 * and we have to copy in the ifconf structure to find out how big the
	 * output buffer is and where to copy out to.  Sure no problem...
	 *
	 */
	STRUCT_SET_HANDLE(ifc, iocp->ioc_flag, NULL);
	if ((mp1->b_wptr - mp1->b_rptr) == STRUCT_SIZE(ifc)) {
		int numifs = 0;
		size_t ifc_bufsize;

		/*
		 * Must be (better be!) continuation of a TRANSPARENT
		 * IOCTL.  We just copied in the ifconf structure.
		 */
		STRUCT_SET_HANDLE(ifc, iocp->ioc_flag,
		    (struct ifconf *)mp1->b_rptr);

		/*
		 * Allocate a buffer to hold requested information.
		 *
		 * If ifc_len is larger than what is needed, we only
		 * allocate what we will use.
		 *
		 * If ifc_len is smaller than what is needed, return
		 * EINVAL.
		 *
		 * XXX: the ill_t structure can hava 2 counters, for
		 * v4 and v6 (not just ill_ipif_up_count) to store the
		 * number of interfaces for a device, so we don't need
		 * to count them here...
		 */
		numifs = ip_get_numifs(zoneid);

		ifclen = STRUCT_FGET(ifc, ifc_len);
		ifc_bufsize = numifs * sizeof (struct ifreq);
		if (ifc_bufsize > ifclen) {
			if (iocp->ioc_cmd == O_SIOCGIFCONF) {
				/* old behaviour */
				return (EINVAL);
			} else {
				ifc_bufsize = ifclen;
			}
		}

		mp1 = mi_copyout_alloc(q, mp,
		    STRUCT_FGETP(ifc, ifc_buf), ifc_bufsize, B_FALSE);
		if (mp1 == NULL)
			return (ENOMEM);

		mp1->b_wptr = mp1->b_rptr + ifc_bufsize;
	}
	bzero(mp1->b_rptr, mp1->b_wptr - mp1->b_rptr);
	/*
	 * the SIOCGIFCONF ioctl only knows about
	 * IPv4 addresses, so don't try to tell
	 * it about interfaces with IPv6-only
	 * addresses. (Last parm 'isv6' is B_FALSE)
	 */

	ifr = (struct ifreq *)mp1->b_rptr;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_V4(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif;
		    ipif = ipif->ipif_next) {
			if (zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES)
				continue;
			if ((uchar_t *)&ifr[1] > mp1->b_wptr) {
				if (iocp->ioc_cmd == O_SIOCGIFCONF) {
					/* old behaviour */
					rw_exit(&ill_g_lock);
					return (EINVAL);
				} else {
					goto if_copydone;
				}
			}
			(void) ipif_get_name(ipif,
			    ifr->ifr_name,
			    sizeof (ifr->ifr_name));
			sin = (sin_t *)&ifr->ifr_addr;
			*sin = sin_null;
			sin->sin_family = AF_INET;
			sin->sin_addr.s_addr = ipif->ipif_lcl_addr;
			ifr++;
		}
	}
if_copydone:
	rw_exit(&ill_g_lock);
	mp1->b_wptr = (uchar_t *)ifr;

	if (STRUCT_BUF(ifc) != NULL) {
		STRUCT_FSET(ifc, ifc_len,
			(int)((uchar_t *)ifr - mp1->b_rptr));
	}
	return (0);
}

/*
 * Get the interfaces using the address hosted on the interface passed in,
 * as a source adddress
 */
/* ARGSUSED */
int
ip_sioctl_get_lifsrcof(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	mblk_t *mp1;
	ill_t	*ill, *ill_head;
	ipif_t	*ipif, *orig_ipif;
	int	numlifs = 0;
	size_t	lifs_bufsize, lifsmaxlen;
	struct	lifreq *lifr;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;
	uint_t	ifindex;
	zoneid_t zoneid;
	int err = 0;
	boolean_t isv6 = B_FALSE;
	struct	sockaddr_in	*sin;
	struct	sockaddr_in6	*sin6;

	STRUCT_HANDLE(lifsrcof, lifs);

	ASSERT(q->q_next == NULL);

	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;

	/*
	 * Must be (better be!) continuation of a TRANSPARENT
	 * IOCTL.  We just copied in the lifsrcof structure.
	 */
	STRUCT_SET_HANDLE(lifs, iocp->ioc_flag,
	    (struct lifsrcof *)mp1->b_rptr);

	if (MBLKL(mp1) != STRUCT_SIZE(lifs))
		return (EINVAL);

	ifindex = STRUCT_FGET(lifs, lifs_ifindex);
	isv6 = (Q_TO_CONN(q))->conn_af_isv6;
	ipif = ipif_lookup_on_ifindex(ifindex, isv6, zoneid, q, mp,
	    ip_process_ioctl, &err);
	if (ipif == NULL) {
		ip1dbg(("ip_sioctl_get_lifsrcof: no ipif for ifindex %d\n",
		    ifindex));
		return (err);
	}


	/* Allocate a buffer to hold requested information */
	numlifs = ip_get_lifsrcofnum(ipif->ipif_ill);
	lifs_bufsize = numlifs * sizeof (struct lifreq);
	lifsmaxlen =  STRUCT_FGET(lifs, lifs_maxlen);
	/* The actual size needed is always returned in lifs_len */
	STRUCT_FSET(lifs, lifs_len, lifs_bufsize);

	/* If the amount we need is more than what is passed in, abort */
	if (lifs_bufsize > lifsmaxlen || lifs_bufsize == 0) {
		ipif_refrele(ipif);
		return (0);
	}

	mp1 = mi_copyout_alloc(q, mp,
	    STRUCT_FGETP(lifs, lifs_buf), lifs_bufsize, B_FALSE);
	if (mp1 == NULL) {
		ipif_refrele(ipif);
		return (ENOMEM);
	}

	mp1->b_wptr = mp1->b_rptr + lifs_bufsize;
	bzero(mp1->b_rptr, lifs_bufsize);

	lifr = (struct lifreq *)mp1->b_rptr;

	ill = ill_head = ipif->ipif_ill;
	orig_ipif = ipif;

	/* ill_g_usesrc_lock protects ill_usesrc_grp_next */
	rw_enter(&ill_g_usesrc_lock, RW_READER);
	rw_enter(&ill_g_lock, RW_READER);

	ill = ill->ill_usesrc_grp_next; /* start from next ill */
	for (; (ill != NULL) && (ill != ill_head);
	    ill = ill->ill_usesrc_grp_next) {

		if ((uchar_t *)&lifr[1] > mp1->b_wptr)
			break;

		ipif = ill->ill_ipif;
		(void) ipif_get_name(ipif,
		    lifr->lifr_name, sizeof (lifr->lifr_name));
		if (ipif->ipif_isv6) {
			sin6 = (sin6_t *)&lifr->lifr_addr;
			*sin6 = sin6_null;
			sin6->sin6_family = AF_INET6;
			sin6->sin6_addr = ipif->ipif_v6lcl_addr;
			lifr->lifr_addrlen = ip_mask_to_plen_v6(
			    &ipif->ipif_v6net_mask);
		} else {
			sin = (sin_t *)&lifr->lifr_addr;
			*sin = sin_null;
			sin->sin_family = AF_INET;
			sin->sin_addr.s_addr = ipif->ipif_lcl_addr;
			lifr->lifr_addrlen = ip_mask_to_plen(
			    ipif->ipif_net_mask);
		}
		lifr++;
	}
	rw_exit(&ill_g_usesrc_lock);
	rw_exit(&ill_g_lock);
	ipif_refrele(orig_ipif);
	mp1->b_wptr = (uchar_t *)lifr;
	STRUCT_FSET(lifs, lifs_len, (int)((uchar_t *)lifr - mp1->b_rptr));

	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_lifconf(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	mblk_t *mp1;
	int	list;
	ill_t	*ill;
	ipif_t	*ipif;
	int	flags;
	int	numlifs = 0;
	size_t	lifc_bufsize;
	struct	lifreq *lifr;
	sa_family_t	family;
	struct	sockaddr_in	*sin;
	struct	sockaddr_in6	*sin6;
	ill_walk_context_t	ctx;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;
	int32_t	lifclen;
	zoneid_t zoneid;
	STRUCT_HANDLE(lifconf, lifc);

	ip1dbg(("ip_sioctl_get_lifconf"));

	ASSERT(q->q_next == NULL);

	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;

	/*
	 * An extended version of SIOCGIFCONF that takes an
	 * additional address family and flags field.
	 * AF_UNSPEC retrieve both IPv4 and IPv6.
	 * Unless LIFC_NOXMIT is specified the IPIF_NOXMIT
	 * interfaces are omitted.
	 * Similarly, IPIF_TEMPORARY interfaces are omitted
	 * unless LIFC_TEMPORARY is specified.
	 * If LIFC_EXTERNAL_SOURCE is specified, IPIF_NOXMIT,
	 * IPIF_NOLOCAL, PHYI_LOOPBACK, IPIF_DEPRECATED and
	 * not IPIF_UP interfaces are omitted. LIFC_EXTERNAL_SOURCE
	 * has priority over LIFC_NOXMIT.
	 */
	STRUCT_SET_HANDLE(lifc, iocp->ioc_flag, NULL);

	if ((mp1->b_wptr - mp1->b_rptr) != STRUCT_SIZE(lifc))
		return (EINVAL);

	/*
	 * Must be (better be!) continuation of a TRANSPARENT
	 * IOCTL.  We just copied in the lifconf structure.
	 */
	STRUCT_SET_HANDLE(lifc, iocp->ioc_flag, (struct lifconf *)mp1->b_rptr);

	family = STRUCT_FGET(lifc, lifc_family);
	flags = STRUCT_FGET(lifc, lifc_flags);

	switch (family) {
	case AF_UNSPEC:
		/*
		 * walk all ILL's.
		 */
		list = MAX_G_HEADS;
		break;
	case AF_INET:
		/*
		 * walk only IPV4 ILL's.
		 */
		list = IP_V4_G_HEAD;
		break;
	case AF_INET6:
		/*
		 * walk only IPV6 ILL's.
		 */
		list = IP_V6_G_HEAD;
		break;
	default:
		return (EAFNOSUPPORT);
	}

	/*
	 * Allocate a buffer to hold requested information.
	 *
	 * If lifc_len is larger than what is needed, we only
	 * allocate what we will use.
	 *
	 * If lifc_len is smaller than what is needed, return
	 * EINVAL.
	 */
	numlifs = ip_get_numlifs(family, flags, zoneid);
	lifc_bufsize = numlifs * sizeof (struct lifreq);
	lifclen = STRUCT_FGET(lifc, lifc_len);
	if (lifc_bufsize > lifclen) {
		if (iocp->ioc_cmd == O_SIOCGLIFCONF)
			return (EINVAL);
		else
			lifc_bufsize = lifclen;
	}

	mp1 = mi_copyout_alloc(q, mp,
	    STRUCT_FGETP(lifc, lifc_buf), lifc_bufsize, B_FALSE);
	if (mp1 == NULL)
		return (ENOMEM);

	mp1->b_wptr = mp1->b_rptr + lifc_bufsize;
	bzero(mp1->b_rptr, mp1->b_wptr - mp1->b_rptr);

	lifr = (struct lifreq *)mp1->b_rptr;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ill_first(list, list, &ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if ((ipif->ipif_flags & IPIF_NOXMIT) &&
			    !(flags & LIFC_NOXMIT))
				continue;

			if ((ipif->ipif_flags & IPIF_TEMPORARY) &&
			    !(flags & LIFC_TEMPORARY))
				continue;

			if (((ipif->ipif_flags &
			    (IPIF_NOXMIT|IPIF_NOLOCAL|
			    IPIF_DEPRECATED)) ||
			    (ill->ill_phyint->phyint_flags &
			    PHYI_LOOPBACK) ||
			    !(ipif->ipif_flags & IPIF_UP)) &&
			    (flags & LIFC_EXTERNAL_SOURCE))
				continue;

			if (zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES &&
			    (zoneid != GLOBAL_ZONEID ||
			    !(flags & LIFC_ALLZONES)))
				continue;

			if ((uchar_t *)&lifr[1] > mp1->b_wptr) {
				if (iocp->ioc_cmd == O_SIOCGLIFCONF) {
					rw_exit(&ill_g_lock);
					return (EINVAL);
				} else {
					goto lif_copydone;
				}
			}

			(void) ipif_get_name(ipif,
				lifr->lifr_name,
				sizeof (lifr->lifr_name));
			if (ipif->ipif_isv6) {
				sin6 = (sin6_t *)&lifr->lifr_addr;
				*sin6 = sin6_null;
				sin6->sin6_family = AF_INET6;
				sin6->sin6_addr =
				ipif->ipif_v6lcl_addr;
				lifr->lifr_addrlen =
				ip_mask_to_plen_v6(
				    &ipif->ipif_v6net_mask);
			} else {
				sin = (sin_t *)&lifr->lifr_addr;
				*sin = sin_null;
				sin->sin_family = AF_INET;
				sin->sin_addr.s_addr =
				    ipif->ipif_lcl_addr;
				lifr->lifr_addrlen =
				    ip_mask_to_plen(
				    ipif->ipif_net_mask);
			}
			lifr++;
		}
	}
lif_copydone:
	rw_exit(&ill_g_lock);

	mp1->b_wptr = (uchar_t *)lifr;
	if (STRUCT_BUF(lifc) != NULL) {
		STRUCT_FSET(lifc, lifc_len,
			(int)((uchar_t *)lifr - mp1->b_rptr));
	}
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_set_ipmpfailback(ipif_t *dummy_ipif, sin_t *dummy_sin,
    queue_t *q, mblk_t *mp, ip_ioctl_cmd_t *ipip, void *ifreq)
{
	/* Existence of b_cont->b_cont checked in ip_wput_nondata */
	ipmp_enable_failback = *(int *)mp->b_cont->b_cont->b_rptr;
	return (0);
}

static void
ip_sioctl_ip6addrpolicy(queue_t *q, mblk_t *mp)
{
	ip6_asp_t *table;
	size_t table_size;
	mblk_t *data_mp;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;

	/* These two ioctls are I_STR only */
	if (iocp->ioc_count == TRANSPARENT) {
		miocnak(q, mp, 0, EINVAL);
		return;
	}

	data_mp = mp->b_cont;
	if (data_mp == NULL) {
		/* The user passed us a NULL argument */
		table = NULL;
		table_size = iocp->ioc_count;
	} else {
		/*
		 * The user provided a table.  The stream head
		 * may have copied in the user data in chunks,
		 * so make sure everything is pulled up
		 * properly.
		 */
		if (MBLKL(data_mp) < iocp->ioc_count) {
			mblk_t *new_data_mp;
			if ((new_data_mp = msgpullup(data_mp, -1)) ==
			    NULL) {
				miocnak(q, mp, 0, ENOMEM);
				return;
			}
			freemsg(data_mp);
			data_mp = new_data_mp;
			mp->b_cont = data_mp;
		}
		table = (ip6_asp_t *)data_mp->b_rptr;
		table_size = iocp->ioc_count;
	}

	switch (iocp->ioc_cmd) {
	case SIOCGIP6ADDRPOLICY:
		iocp->ioc_rval = ip6_asp_get(table, table_size);
		if (iocp->ioc_rval == -1)
			iocp->ioc_error = EINVAL;
#if defined(_SYSCALL32_IMPL) && _LONG_LONG_ALIGNMENT_32 == 4
		else if (table != NULL &&
		    (iocp->ioc_flag & IOC_MODELS) == IOC_ILP32) {
			ip6_asp_t *src = table;
			ip6_asp32_t *dst = (void *)table;
			int count = table_size / sizeof (ip6_asp_t);
			int i;

			/*
			 * We need to do an in-place shrink of the array
			 * to match the alignment attributes of the
			 * 32-bit ABI looking at it.
			 */
			/* LINTED: logical expression always true: op "||" */
			ASSERT(sizeof (*src) > sizeof (*dst));
			for (i = 1; i < count; i++)
				bcopy(src + i, dst + i, sizeof (*dst));
		}
#endif
		break;

	case SIOCSIP6ADDRPOLICY:
		ASSERT(mp->b_prev == NULL);
		mp->b_prev = (void *)q;
#if defined(_SYSCALL32_IMPL) && _LONG_LONG_ALIGNMENT_32 == 4
		/*
		 * We pass in the datamodel here so that the ip6_asp_replace()
		 * routine can handle converting from 32-bit to native formats
		 * where necessary.
		 *
		 * A better way to handle this might be to convert the inbound
		 * data structure here, and hang it off a new 'mp'; thus the
		 * ip6_asp_replace() logic would always be dealing with native
		 * format data structures..
		 *
		 * (An even simpler way to handle these ioctls is to just
		 * add a 32-bit trailing 'pad' field to the ip6_asp_t structure
		 * and just recompile everything that depends on it.)
		 */
#endif
		ip6_asp_replace(mp, table, table_size, B_FALSE,
		    iocp->ioc_flag & IOC_MODELS);
		return;
	}

	DB_TYPE(mp) =  (iocp->ioc_error == 0) ? M_IOCACK : M_IOCNAK;
	qreply(q, mp);
}

static void
ip_sioctl_dstinfo(queue_t *q, mblk_t *mp)
{
	mblk_t 		*data_mp;
	struct dstinforeq	*dir;
	uint8_t		*end, *cur;
	in6_addr_t	*daddr, *saddr;
	ipaddr_t	v4daddr;
	ire_t		*ire;
	char		*slabel, *dlabel;
	boolean_t	isipv4;
	int		match_ire;
	ill_t		*dst_ill;
	ipif_t		*src_ipif, *ire_ipif;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;
	zoneid_t	zoneid;

	ASSERT(q->q_next == NULL); /* this ioctl not allowed if ip is module */
	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/*
	 * This ioctl is I_STR only, and must have a
	 * data mblk following the M_IOCTL mblk.
	 */
	data_mp = mp->b_cont;
	if (iocp->ioc_count == TRANSPARENT || data_mp == NULL) {
		miocnak(q, mp, 0, EINVAL);
		return;
	}

	if (MBLKL(data_mp) < iocp->ioc_count) {
		mblk_t *new_data_mp;

		if ((new_data_mp = msgpullup(data_mp, -1)) == NULL) {
			miocnak(q, mp, 0, ENOMEM);
			return;
		}
		freemsg(data_mp);
		data_mp = new_data_mp;
		mp->b_cont = data_mp;
	}
	match_ire = MATCH_IRE_RECURSIVE | MATCH_IRE_DEFAULT | MATCH_IRE_PARENT;

	for (cur = data_mp->b_rptr, end = data_mp->b_wptr;
	    end - cur >= sizeof (struct dstinforeq);
	    cur += sizeof (struct dstinforeq)) {
		dir = (struct dstinforeq *)cur;
		daddr = &dir->dir_daddr;
		saddr = &dir->dir_saddr;

		/*
		 * ip_addr_scope_v6() and ip6_asp_lookup() handle
		 * v4 mapped addresses; ire_ftable_lookup[_v6]()
		 * and ipif_select_source[_v6]() do not.
		 */
		dir->dir_dscope = ip_addr_scope_v6(daddr);
		dlabel = ip6_asp_lookup(daddr, &dir->dir_precedence);

		isipv4 = IN6_IS_ADDR_V4MAPPED(daddr);
		if (isipv4) {
			IN6_V4MAPPED_TO_IPADDR(daddr, v4daddr);
			ire = ire_ftable_lookup(v4daddr, NULL, NULL,
			    0, NULL, NULL, zoneid, 0, NULL, match_ire);
		} else {
			ire = ire_ftable_lookup_v6(daddr, NULL, NULL,
			    0, NULL, NULL, zoneid, 0, NULL, match_ire);
		}
		if (ire == NULL) {
			dir->dir_dreachable = 0;

			/* move on to next dst addr */
			continue;
		}
		dir->dir_dreachable = 1;

		ire_ipif = ire->ire_ipif;
		if (ire_ipif == NULL)
			goto next_dst;

		/*
		 * We expect to get back an interface ire or a
		 * gateway ire cache entry.  For both types, the
		 * output interface is ire_ipif->ipif_ill.
		 */
		dst_ill = ire_ipif->ipif_ill;
		dir->dir_dmactype = dst_ill->ill_mactype;

		if (isipv4) {
			src_ipif = ipif_select_source(dst_ill, v4daddr, zoneid);
		} else {
			src_ipif = ipif_select_source_v6(dst_ill,
			    daddr, RESTRICT_TO_NONE, IPV6_PREFER_SRC_DEFAULT,
			    zoneid);
		}
		if (src_ipif == NULL)
			goto next_dst;

		*saddr = src_ipif->ipif_v6lcl_addr;
		dir->dir_sscope = ip_addr_scope_v6(saddr);
		slabel = ip6_asp_lookup(saddr, NULL);
		dir->dir_labelmatch = ip6_asp_labelcmp(dlabel, slabel);
		dir->dir_sdeprecated =
		    (src_ipif->ipif_flags & IPIF_DEPRECATED) ? 1 : 0;
		ipif_refrele(src_ipif);
next_dst:
		ire_refrele(ire);
	}
	miocack(q, mp, iocp->ioc_count, 0);
}


/*
 * Check if this is an address assigned to this machine.
 * Skips interfaces that are down by using ire checks.
 * Translates mapped addresses to v4 addresses and then
 * treats them as such, returning true if the v4 address
 * associated with this mapped address is configured.
 * Note: Applications will have to be careful what they do
 * with the response; use of mapped addresses limits
 * what can be done with the socket, especially with
 * respect to socket options and ioctls - neither IPv4
 * options nor IPv6 sticky options/ancillary data options
 * may be used.
 */
/* ARGSUSED */
int
ip_sioctl_tmyaddr(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	struct sioc_addrreq *sia;
	sin_t *sin;
	ire_t *ire;
	mblk_t *mp1;
	zoneid_t zoneid;

	ip1dbg(("ip_sioctl_tmyaddr"));

	ASSERT(q->q_next == NULL); /* this ioctl not allowed if ip is module */
	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	sia = (struct sioc_addrreq *)mp1->b_rptr;
	sin = (sin_t *)&sia->sa_addr;
	switch (sin->sin_family) {
	case AF_INET6: {
		sin6_t *sin6 = (sin6_t *)sin;

		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
			ipaddr_t v4_addr;

			IN6_V4MAPPED_TO_IPADDR(&sin6->sin6_addr,
			    v4_addr);
			ire = ire_ctable_lookup(v4_addr, 0,
			    IRE_LOCAL|IRE_LOOPBACK, NULL, zoneid,
			    NULL, MATCH_IRE_TYPE | MATCH_IRE_ZONEONLY);
		} else {
			in6_addr_t v6addr;

			v6addr = sin6->sin6_addr;
			ire = ire_ctable_lookup_v6(&v6addr, 0,
			    IRE_LOCAL|IRE_LOOPBACK, NULL, zoneid,
			    NULL, MATCH_IRE_TYPE | MATCH_IRE_ZONEONLY);
		}
		break;
	}
	case AF_INET: {
		ipaddr_t v4addr;

		v4addr = sin->sin_addr.s_addr;
		ire = ire_ctable_lookup(v4addr, 0,
		    IRE_LOCAL|IRE_LOOPBACK, NULL, zoneid,
		    NULL, MATCH_IRE_TYPE | MATCH_IRE_ZONEONLY);
		break;
	}
	default:
		return (EAFNOSUPPORT);
	}
	if (ire != NULL) {
		sia->sa_res = 1;
		ire_refrele(ire);
	} else {
		sia->sa_res = 0;
	}
	return (0);
}

/*
 * Check if this is an address assigned on-link i.e. neighbor,
 * and makes sure it's reachable from the current zone.
 * Returns true for my addresses as well.
 * Translates mapped addresses to v4 addresses and then
 * treats them as such, returning true if the v4 address
 * associated with this mapped address is configured.
 * Note: Applications will have to be careful what they do
 * with the response; use of mapped addresses limits
 * what can be done with the socket, especially with
 * respect to socket options and ioctls - neither IPv4
 * options nor IPv6 sticky options/ancillary data options
 * may be used.
 */
/* ARGSUSED */
int
ip_sioctl_tonlink(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *duymmy_ifreq)
{
	struct sioc_addrreq *sia;
	sin_t *sin;
	mblk_t	*mp1;
	ire_t *ire = NULL;
	zoneid_t zoneid;

	ip1dbg(("ip_sioctl_tonlink"));

	ASSERT(q->q_next == NULL); /* this ioctl not allowed if ip is module */
	zoneid = Q_TO_CONN(q)->conn_zoneid;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	sia = (struct sioc_addrreq *)mp1->b_rptr;
	sin = (sin_t *)&sia->sa_addr;

	/*
	 * Match addresses with a zero gateway field to avoid
	 * routes going through a router.
	 * Exclude broadcast and multicast addresses.
	 */
	switch (sin->sin_family) {
	case AF_INET6: {
		sin6_t *sin6 = (sin6_t *)sin;

		if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
			ipaddr_t v4_addr;

			IN6_V4MAPPED_TO_IPADDR(&sin6->sin6_addr,
			    v4_addr);
			if (!CLASSD(v4_addr)) {
				ire = ire_route_lookup(v4_addr, 0, 0, 0,
				    NULL, NULL, zoneid, NULL,
				    MATCH_IRE_GW);
			}
		} else {
			in6_addr_t v6addr;
			in6_addr_t v6gw;

			v6addr = sin6->sin6_addr;
			v6gw = ipv6_all_zeros;
			if (!IN6_IS_ADDR_MULTICAST(&v6addr)) {
				ire = ire_route_lookup_v6(&v6addr, 0,
				    &v6gw, 0, NULL, NULL, zoneid,
				    NULL, MATCH_IRE_GW);
			}
		}
		break;
	}
	case AF_INET: {
		ipaddr_t v4addr;

		v4addr = sin->sin_addr.s_addr;
		if (!CLASSD(v4addr)) {
			ire = ire_route_lookup(v4addr, 0, 0, 0,
			    NULL, NULL, zoneid, NULL,
			    MATCH_IRE_GW);
		}
		break;
	}
	default:
		return (EAFNOSUPPORT);
	}
	sia->sa_res = 0;
	if (ire != NULL) {
		if (ire->ire_type & (IRE_INTERFACE|IRE_CACHE|
		    IRE_LOCAL|IRE_LOOPBACK)) {
			sia->sa_res = 1;
		}
		ire_refrele(ire);
	}
	return (0);
}

/*
 * TBD: implement when kernel maintaines a list of site prefixes.
 */
/* ARGSUSED */
int
ip_sioctl_tmysite(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	return (ENXIO);
}

/* ARGSUSED */
int
ip_sioctl_tunparam(ipif_t *ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	ill_t  		*ill;
	mblk_t		*mp1;
	conn_t		*connp;
	boolean_t	success;

	ip1dbg(("ip_sioctl_tunparam(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/* ioctl comes down on an conn */
	ASSERT(!(q->q_flag & QREADR) && q->q_next == NULL);
	connp = Q_TO_CONN(q);

	mp->b_datap->db_type = M_IOCTL;

	/*
	 * Send down a copy. (copymsg does not copy b_next/b_prev).
	 * The original mp contains contaminated b_next values due to 'mi',
	 * which is needed to do the mi_copy_done. Unfortunately if we
	 * send down the original mblk itself and if we are popped due to an
	 * an unplumb before the response comes back from tunnel,
	 * the streamhead (which does a freemsg) will see this contaminated
	 * message and the assertion in freemsg about non-null b_next/b_prev
	 * will panic a DEBUG kernel.
	 */
	mp1 = copymsg(mp);
	if (mp1 == NULL)
		return (ENOMEM);

	ill = ipif->ipif_ill;
	mutex_enter(&connp->conn_lock);
	mutex_enter(&ill->ill_lock);
	if (ipip->ipi_cmd == SIOCSTUNPARAM || ipip->ipi_cmd == OSIOCSTUNPARAM) {
		success = ipsq_pending_mp_add(connp, ipif, CONNP_TO_WQ(connp),
		    mp, 0);
	} else {
		success = ill_pending_mp_add(ill, connp, mp);
	}
	mutex_exit(&ill->ill_lock);
	mutex_exit(&connp->conn_lock);

	if (success) {
		ip1dbg(("sending down tunparam request "));
		putnext(ill->ill_wq, mp1);
		return (EINPROGRESS);
	} else {
		/* The conn has started closing */
		freemsg(mp1);
		return (EINTR);
	}
}

static int
ip_sioctl_arp_common(ill_t *ill, queue_t *q, mblk_t *mp, sin_t *sin,
    boolean_t x_arp_ioctl, boolean_t if_arp_ioctl)
{
	mblk_t *mp1;
	mblk_t *mp2;
	mblk_t *pending_mp;
	ipaddr_t ipaddr;
	area_t *area;
	struct iocblk *iocp;
	conn_t *connp;
	struct arpreq *ar;
	struct xarpreq *xar;
	boolean_t success;
	int flags, alength;
	char *lladdr;

	ASSERT(!(q->q_flag & QREADR) && q->q_next == NULL);
	connp = Q_TO_CONN(q);

	iocp = (struct iocblk *)mp->b_rptr;
	/*
	 * ill has already been set depending on whether
	 * bsd style or interface style ioctl.
	 */
	ASSERT(ill != NULL);

	/*
	 * Is this one of the new SIOC*XARP ioctls?
	 */
	if (x_arp_ioctl) {
		/* We have a chain - M_IOCTL-->MI_COPY_MBLK-->XARPREQ_MBLK */
		xar = (struct xarpreq *)mp->b_cont->b_cont->b_rptr;
		ar = NULL;

		flags = xar->xarp_flags;
		lladdr = LLADDR(&xar->xarp_ha);
		/*
		 * Validate against user's link layer address length
		 * input and name and addr length limits.
		 */
		alength = ill->ill_phys_addr_length;
		if (iocp->ioc_cmd == SIOCSXARP) {
			if (alength != xar->xarp_ha.sdl_alen ||
			    (alength + xar->xarp_ha.sdl_nlen >
			    sizeof (xar->xarp_ha.sdl_data)))
				return (EINVAL);
		}
	} else {
		/* We have a chain - M_IOCTL-->MI_COPY_MBLK-->ARPREQ_MBLK */
		ar = (struct arpreq *)mp->b_cont->b_cont->b_rptr;
		xar = NULL;

		flags = ar->arp_flags;
		lladdr = ar->arp_ha.sa_data;
		/*
		 * Theoretically, the sa_family could tell us what link
		 * layer type this operation is trying to deal with. By
		 * common usage AF_UNSPEC means ethernet. We'll assume
		 * any attempt to use the SIOC?ARP ioctls is for ethernet,
		 * for now. Our new SIOC*XARP ioctls can be used more
		 * generally.
		 *
		 * If the underlying media happens to have a non 6 byte
		 * address, arp module will fail set/get, but the del
		 * operation will succeed.
		 */
		alength = 6;
		if ((iocp->ioc_cmd != SIOCDARP) &&
		    (alength != ill->ill_phys_addr_length)) {
			return (EINVAL);
		}
	}

	/*
	 * We are going to pass up to ARP a packet chain that looks
	 * like:
	 *
	 * M_IOCTL-->ARP_op_MBLK-->ORIG_M_IOCTL-->MI_COPY_MBLK-->[X]ARPREQ_MBLK
	 *
	 * Get a copy of the original IOCTL mblk to head the chain,
	 * to be sent up (in mp1). Also get another copy to store
	 * in the ill_pending_mp list, for matching the response
	 * when it comes back from ARP.
	 */
	mp1 = copyb(mp);
	pending_mp = copymsg(mp);
	if (mp1 == NULL || pending_mp == NULL) {
		if (mp1 != NULL)
			freeb(mp1);
		if (pending_mp != NULL)
			inet_freemsg(pending_mp);
		return (ENOMEM);
	}

	ipaddr = sin->sin_addr.s_addr;

	mp2 = ill_arp_alloc(ill, (uchar_t *)&ip_area_template,
	    (caddr_t)&ipaddr);
	if (mp2 == NULL) {
		freeb(mp1);
		inet_freemsg(pending_mp);
		return (ENOMEM);
	}
	/* Put together the chain. */
	mp1->b_cont = mp2;
	mp1->b_datap->db_type = M_IOCTL;
	mp2->b_cont = mp;
	mp2->b_datap->db_type = M_DATA;

	iocp = (struct iocblk *)mp1->b_rptr;

	/*
	 * An M_IOCDATA's payload (struct copyresp) is mostly the same as an
	 * M_IOCTL's payload (struct iocblk), but 'struct copyresp' has a
	 * cp_private field (or cp_rval on 32-bit systems) in place of the
	 * ioc_count field; set ioc_count to be correct.
	 */
	iocp->ioc_count = MBLKL(mp1->b_cont);

	/*
	 * Set the proper command in the ARP message.
	 * Convert the SIOC{G|S|D}ARP calls into our
	 * AR_ENTRY_xxx calls.
	 */
	area = (area_t *)mp2->b_rptr;
	switch (iocp->ioc_cmd) {
	case SIOCDARP:
	case SIOCDXARP:
		/*
		 * We defer deleting the corresponding IRE until
		 * we return from arp.
		 */
		area->area_cmd = AR_ENTRY_DELETE;
		area->area_proto_mask_offset = 0;
		break;
	case SIOCGARP:
	case SIOCGXARP:
		area->area_cmd = AR_ENTRY_SQUERY;
		area->area_proto_mask_offset = 0;
		break;
	case SIOCSARP:
	case SIOCSXARP: {
		/*
		 * Delete the corresponding ire to make sure IP will
		 * pick up any change from arp.
		 */
		if (!if_arp_ioctl) {
			(void) ip_ire_clookup_and_delete(ipaddr, NULL);
			break;
		} else {
			ipif_t *ipif = ipif_get_next_ipif(NULL, ill);
			if (ipif != NULL) {
				(void) ip_ire_clookup_and_delete(ipaddr, ipif);
				ipif_refrele(ipif);
			}
			break;
		}
	}
	}
	iocp->ioc_cmd = area->area_cmd;

	/*
	 * Before sending 'mp' to ARP, we have to clear the b_next
	 * and b_prev. Otherwise if STREAMS encounters such a message
	 * in freemsg(), (because ARP can close any time) it can cause
	 * a panic. But mi code needs the b_next and b_prev values of
	 * mp->b_cont, to complete the ioctl. So we store it here
	 * in pending_mp->bcont, and restore it in ip_sioctl_iocack()
	 * when the response comes down from ARP.
	 */
	pending_mp->b_cont->b_next = mp->b_cont->b_next;
	pending_mp->b_cont->b_prev = mp->b_cont->b_prev;
	mp->b_cont->b_next = NULL;
	mp->b_cont->b_prev = NULL;

	mutex_enter(&connp->conn_lock);
	mutex_enter(&ill->ill_lock);
	/* conn has not yet started closing, hence this can't fail */
	success = ill_pending_mp_add(ill, connp, pending_mp);
	ASSERT(success);
	mutex_exit(&ill->ill_lock);
	mutex_exit(&connp->conn_lock);

	/*
	 * Fill in the rest of the ARP operation fields.
	 */
	area->area_hw_addr_length = alength;
	bcopy(lladdr,
	    (char *)area + area->area_hw_addr_offset,
	    area->area_hw_addr_length);
	/* Translate the flags. */
	if (flags & ATF_PERM)
		area->area_flags |= ACE_F_PERMANENT;
	if (flags & ATF_PUBL)
		area->area_flags |= ACE_F_PUBLISH;
	if (flags & ATF_AUTHORITY)
		area->area_flags |= ACE_F_AUTHORITY;

	/*
	 * Up to ARP it goes.  The response will come
	 * back in ip_wput as an M_IOCACK message, and
	 * will be handed to ip_sioctl_iocack for
	 * completion.
	 */
	putnext(ill->ill_rq, mp1);
	return (EINPROGRESS);
}

/* ARGSUSED */
int
ip_sioctl_xarp(ipif_t *ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct xarpreq *xar;
	boolean_t isv6;
	mblk_t	*mp1;
	int	err;
	conn_t	*connp;
	int ifnamelen;
	ire_t	*ire = NULL;
	ill_t	*ill = NULL;
	struct sockaddr_in *sin;
	boolean_t if_arp_ioctl = B_FALSE;

	/* ioctl comes down on an conn */
	ASSERT(!(q->q_flag & QREADR) && q->q_next == NULL);
	connp = Q_TO_CONN(q);
	isv6 = connp->conn_af_isv6;

	/* Existance verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;

	ASSERT(MBLKL(mp1) >= sizeof (*xar));
	xar = (struct xarpreq *)mp1->b_rptr;
	sin = (sin_t *)&xar->xarp_pa;

	if (isv6 || (xar->xarp_ha.sdl_family != AF_LINK) ||
	    (xar->xarp_pa.ss_family != AF_INET))
		return (ENXIO);

	ifnamelen = xar->xarp_ha.sdl_nlen;
	if (ifnamelen != 0) {
		char	*cptr, cval;

		if (ifnamelen >= LIFNAMSIZ)
			return (EINVAL);

		/*
		 * Instead of bcopying a bunch of bytes,
		 * null-terminate the string in-situ.
		 */
		cptr = xar->xarp_ha.sdl_data + ifnamelen;
		cval = *cptr;
		*cptr = '\0';
		ill = ill_lookup_on_name(xar->xarp_ha.sdl_data,
		    B_FALSE, isv6, CONNP_TO_WQ(connp), mp, ip_process_ioctl,
		    &err, NULL);
		*cptr = cval;
		if (ill == NULL)
			return (err);
		if (ill->ill_net_type != IRE_IF_RESOLVER) {
			ill_refrele(ill);
			return (ENXIO);
		}

		if_arp_ioctl = B_TRUE;
	} else {
		/*
		 * PSARC 2003/088 states that if sdl_nlen == 0, it behaves
		 * as an extended BSD ioctl. The kernel uses the IP address
		 * to figure out the network interface.
		 */
		ire = ire_cache_lookup(sin->sin_addr.s_addr, ALL_ZONES, NULL);
		if ((ire == NULL) || (ire->ire_type == IRE_LOOPBACK) ||
		    ((ill = ire_to_ill(ire)) == NULL) ||
		    (ill->ill_net_type != IRE_IF_RESOLVER)) {
			if (ire != NULL)
				ire_refrele(ire);
			ire = ire_ftable_lookup(sin->sin_addr.s_addr,
			    0, 0, IRE_IF_RESOLVER, NULL, NULL, ALL_ZONES, 0,
			    NULL, MATCH_IRE_TYPE);
			if ((ire == NULL) ||
			    ((ill = ire_to_ill(ire)) == NULL)) {
				if (ire != NULL)
					ire_refrele(ire);
				return (ENXIO);
			}
		}
		ASSERT(ire != NULL && ill != NULL);
	}

	err = ip_sioctl_arp_common(ill, q, mp, sin, B_TRUE, if_arp_ioctl);
	if (if_arp_ioctl)
		ill_refrele(ill);
	if (ire != NULL)
		ire_refrele(ire);

	return (err);
}

/*
 * ARP IOCTLs.
 * How does IP get in the business of fronting ARP configuration/queries?
 * Well its like this, the Berkeley ARP IOCTLs (SIOCGARP, SIOCDARP, SIOCSARP)
 * are by tradition passed in through a datagram socket.  That lands in IP.
 * As it happens, this is just as well since the interface is quite crude in
 * that it passes in no information about protocol or hardware types, or
 * interface association.  After making the protocol assumption, IP is in
 * the position to look up the name of the ILL, which ARP will need, and
 * format a request that can be handled by ARP.	 The request is passed up
 * stream to ARP, and the original IOCTL is completed by IP when ARP passes
 * back a response.  ARP supports its own set of more general IOCTLs, in
 * case anyone is interested.
 */
/* ARGSUSED */
int
ip_sioctl_arp(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	struct arpreq *ar;
	struct sockaddr_in *sin;
	ire_t	*ire;
	boolean_t isv6;
	mblk_t	*mp1;
	int	err;
	conn_t	*connp;
	ill_t	*ill;

	/* ioctl comes down on an conn */
	ASSERT(!(q->q_flag & QREADR) && q->q_next == NULL);
	connp = Q_TO_CONN(q);
	isv6 = connp->conn_af_isv6;
	if (isv6)
		return (ENXIO);

	/* Existance verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;

	ar = (struct arpreq *)mp1->b_rptr;
	sin = (sin_t *)&ar->arp_pa;

	/*
	 * We need to let ARP know on which interface the IP
	 * address has an ARP mapping. In the IPMP case, a
	 * simple forwarding table lookup will return the
	 * IRE_IF_RESOLVER for the first interface in the group,
	 * which might not be the interface on which the
	 * requested IP address was resolved due to the ill
	 * selection algorithm (see ip_newroute_get_dst_ill()).
	 * So we do a cache table lookup first: if the IRE cache
	 * entry for the IP address is still there, it will
	 * contain the ill pointer for the right interface, so
	 * we use that. If the cache entry has been flushed, we
	 * fall back to the forwarding table lookup. This should
	 * be rare enough since IRE cache entries have a longer
	 * life expectancy than ARP cache entries.
	 */
	ire = ire_cache_lookup(sin->sin_addr.s_addr, ALL_ZONES, NULL);
	if ((ire == NULL) || (ire->ire_type == IRE_LOOPBACK) ||
	    ((ill = ire_to_ill(ire)) == NULL)) {
		if (ire != NULL)
			ire_refrele(ire);
		ire = ire_ftable_lookup(sin->sin_addr.s_addr,
		    0, 0, IRE_IF_RESOLVER, NULL, NULL, ALL_ZONES, 0,
		    NULL, MATCH_IRE_TYPE);
		if ((ire == NULL) || ((ill = ire_to_ill(ire)) == NULL)) {
			if (ire != NULL)
				ire_refrele(ire);
			return (ENXIO);
		}
	}
	ASSERT(ire != NULL && ill != NULL);

	err = ip_sioctl_arp_common(ill, q, mp, sin, B_FALSE, B_FALSE);
	ire_refrele(ire);
	return (err);
}

/*
 * Do I_PLINK/I_LINK or I_PUNLINK/I_UNLINK with consistency checks and also
 * atomically set/clear the muxids. Also complete the ioctl by acking or
 * naking it.  Note that the code is structured such that the link type,
 * whether it's persistent or not, is treated equally.  ifconfig(1M) and
 * its clones use the persistent link, while pppd(1M) and perhaps many
 * other daemons may use non-persistent link.  When combined with some
 * ill_t states, linking and unlinking lower streams may be used as
 * indicators of dynamic re-plumbing events [see PSARC/1999/348].
 */
/* ARGSUSED */
void
ip_sioctl_plink(ipsq_t *ipsq, queue_t *q, mblk_t *mp, void *dummy_arg)
{
	mblk_t *mp1;
	mblk_t *mp2;
	struct linkblk *li;
	queue_t	*ipwq;
	char	*name;
	struct qinit *qinfo;
	struct ipmx_s *ipmxp;
	ill_t	*ill = NULL;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;
	int	err = 0;
	boolean_t	entered_ipsq = B_FALSE;
	boolean_t islink;
	queue_t *dwq = NULL;

	ASSERT(iocp->ioc_cmd == I_PLINK || iocp->ioc_cmd == I_PUNLINK ||
	    iocp->ioc_cmd == I_LINK || iocp->ioc_cmd == I_UNLINK);

	islink = (iocp->ioc_cmd == I_PLINK || iocp->ioc_cmd == I_LINK) ?
	    B_TRUE : B_FALSE;

	mp1 = mp->b_cont;	/* This is the linkblk info */
	li = (struct linkblk *)mp1->b_rptr;

	/*
	 * ARP has added this special mblk, and the utility is asking us
	 * to perform consistency checks, and also atomically set the
	 * muxid. Ifconfig is an example.  It achieves this by using
	 * /dev/arp as the mux to plink the arp stream, and pushes arp on
	 * to /dev/udp[6] stream for use as the mux when plinking the IP
	 * stream. SIOCSLIFMUXID is not required.  See ifconfig.c, arp.c
	 * and other comments in this routine for more details.
	 */
	mp2 = mp1->b_cont;	/* This is added by ARP */

	/*
	 * If I_{P}LINK/I_{P}UNLINK is issued by a utility other than
	 * ifconfig which didn't push ARP on top of the dummy mux, we won't
	 * get the special mblk above.  For backward compatibility, we just
	 * return success.  The utility will use SIOCSLIFMUXID to store
	 * the muxids.  This is not atomic, and can leave the streams
	 * unplumbable if the utility is interrrupted, before it does the
	 * SIOCSLIFMUXID.
	 */
	if (mp2 == NULL) {
		/*
		 * At this point we don't know whether or not this is the
		 * IP module stream or the ARP device stream.  We need to
		 * walk the lower stream in order to find this out, since
		 * the capability negotiation is done only on the IP module
		 * stream.  IP module instance is identified by the module
		 * name IP, non-null q_next, and it's wput not being ip_lwput.
		 * STREAMS ensures that the lower stream (l_qbot) will not
		 * vanish until this ioctl completes. So we can safely walk
		 * the stream or refer to the q_ptr.
		 */
		ipwq = li->l_qbot;
		while (ipwq != NULL) {
			qinfo = ipwq->q_qinfo;
			name = qinfo->qi_minfo->mi_idname;
			if (name != NULL && name[0] != NULL &&
			    (strcmp(name, ip_mod_info.mi_idname) == 0) &&
			    ((void *)(qinfo->qi_putp) != (void *)ip_lwput) &&
			    (ipwq->q_next != NULL)) {
				break;
			}
			ipwq = ipwq->q_next;
		}
		/*
		 * This looks like an IP module stream, so trigger
		 * the capability reset or re-negotiation if necessary.
		 */
		if (ipwq != NULL) {
			ill = ipwq->q_ptr;
			ASSERT(ill != NULL);

			if (ipsq == NULL) {
				ipsq = ipsq_try_enter(NULL, ill, q, mp,
				    ip_sioctl_plink, NEW_OP, B_TRUE);
				if (ipsq == NULL)
					return;
				entered_ipsq = B_TRUE;
			}
			ASSERT(IAM_WRITER_ILL(ill));
			/*
			 * Store the upper read queue of the module
			 * immediately below IP, and count the total
			 * number of lower modules.  Do this only
			 * for I_PLINK or I_LINK event.
			 */
			ill->ill_lmod_rq = NULL;
			ill->ill_lmod_cnt = 0;
			if (islink && (dwq = ipwq->q_next) != NULL) {
				ill->ill_lmod_rq = RD(dwq);

				while (dwq != NULL) {
					ill->ill_lmod_cnt++;
					dwq = dwq->q_next;
				}
			}
			/*
			 * There's no point in resetting or re-negotiating if
			 * we are not bound to the driver, so only do this if
			 * the DLPI state is idle (up); we assume such state
			 * since ill_ipif_up_count gets incremented in
			 * ipif_up_done(), which is after we are bound to the
			 * driver.  Note that in the case of logical
			 * interfaces, IP won't rebind to the driver unless
			 * the ill_ipif_up_count is 0, meaning that all other
			 * IP interfaces (including the main ipif) are in the
			 * down state.  Because of this, we use such counter
			 * as an indicator, instead of relying on the IPIF_UP
			 * flag, which is per ipif instance.
			 */
			if (ill->ill_ipif_up_count > 0) {
				if (islink)
					ill_capability_probe(ill);
				else
					ill_capability_reset(ill);
			}
		}
		goto done;
	}

	/*
	 * This is an I_{P}LINK sent down by ifconfig on
	 * /dev/arp. ARP has appended this last (3rd) mblk,
	 * giving more info. STREAMS ensures that the lower
	 * stream (l_qbot) will not vanish until this ioctl
	 * completes. So we can safely walk the stream or refer
	 * to the q_ptr.
	 */
	ipmxp = (struct ipmx_s *)mp2->b_rptr;
	if (ipmxp->ipmx_arpdev_stream) {
		/*
		 * The operation is occuring on the arp-device
		 * stream.
		 */
		ill = ill_lookup_on_name(ipmxp->ipmx_name, B_FALSE, B_FALSE,
		    q, mp, ip_sioctl_plink, &err, NULL);
		if (ill == NULL) {
			if (err == EINPROGRESS) {
				return;
			} else {
				err = EINVAL;
				goto done;
			}
		}

		if (ipsq == NULL) {
			ipsq = ipsq_try_enter(NULL, ill, q, mp, ip_sioctl_plink,
			    NEW_OP, B_TRUE);
			if (ipsq == NULL) {
				ill_refrele(ill);
				return;
			}
			entered_ipsq = B_TRUE;
		}
		ASSERT(IAM_WRITER_ILL(ill));
		ill_refrele(ill);
		/*
		 * To ensure consistency between IP and ARP,
		 * the following LIFO scheme is used in
		 * plink/punlink. (IP first, ARP last).
		 * This is because the muxid's are stored
		 * in the IP stream on the ill.
		 *
		 * I_{P}LINK: ifconfig plinks the IP stream before
		 * plinking the ARP stream. On an arp-dev
		 * stream, IP checks that it is not yet
		 * plinked, and it also checks that the
		 * corresponding IP stream is already plinked.
		 *
		 * I_{P}UNLINK: ifconfig punlinks the ARP stream
		 * before punlinking the IP stream. IP does
		 * not allow punlink of the IP stream unless
		 * the arp stream has been punlinked.
		 *
		 */
		if ((islink &&
		    (ill->ill_arp_muxid != 0 || ill->ill_ip_muxid == 0)) ||
		    (!islink &&
		    ill->ill_arp_muxid != li->l_index)) {
			err = EINVAL;
			goto done;
		}
		if (islink) {
			ill->ill_arp_muxid = li->l_index;
		} else {
			ill->ill_arp_muxid = 0;
		}
	} else {
		/*
		 * This must be the IP module stream with or
		 * without arp. Walk the stream and locate the
		 * IP module. An IP module instance is
		 * identified by the module name IP, non-null
		 * q_next, and it's wput not being ip_lwput.
		 */
		ipwq = li->l_qbot;
		while (ipwq != NULL) {
			qinfo = ipwq->q_qinfo;
			name = qinfo->qi_minfo->mi_idname;
			if (name != NULL && name[0] != NULL &&
			    (strcmp(name, ip_mod_info.mi_idname) == 0) &&
			    ((void *)(qinfo->qi_putp) != (void *)ip_lwput) &&
			    (ipwq->q_next != NULL)) {
				break;
			}
			ipwq = ipwq->q_next;
		}
		if (ipwq != NULL) {
			ill = ipwq->q_ptr;
			ASSERT(ill != NULL);

			if (ipsq == NULL) {
				ipsq = ipsq_try_enter(NULL, ill, q, mp,
				    ip_sioctl_plink, NEW_OP, B_TRUE);
				if (ipsq == NULL)
					return;
				entered_ipsq = B_TRUE;
			}
			ASSERT(IAM_WRITER_ILL(ill));
			/*
			 * Return error if the ip_mux_id is
			 * non-zero and command is I_{P}LINK.
			 * If command is I_{P}UNLINK, return
			 * error if the arp-devstr is not
			 * yet punlinked.
			 */
			if ((islink && ill->ill_ip_muxid != 0) ||
			    (!islink && ill->ill_arp_muxid != 0)) {
				err = EINVAL;
				goto done;
			}
			ill->ill_lmod_rq = NULL;
			ill->ill_lmod_cnt = 0;
			if (islink) {
				/*
				 * Store the upper read queue of the module
				 * immediately below IP, and count the total
				 * number of lower modules.
				 */
				if ((dwq = ipwq->q_next) != NULL) {
					ill->ill_lmod_rq = RD(dwq);

					while (dwq != NULL) {
						ill->ill_lmod_cnt++;
						dwq = dwq->q_next;
					}
				}
				ill->ill_ip_muxid = li->l_index;
			} else {
				ill->ill_ip_muxid = 0;
			}

			/*
			 * See comments above about resetting/re-
			 * negotiating driver sub-capabilities.
			 */
			if (ill->ill_ipif_up_count > 0) {
				if (islink)
					ill_capability_probe(ill);
				else
					ill_capability_reset(ill);
			}
		}
	}
done:
	iocp->ioc_count = 0;
	iocp->ioc_error = err;
	if (err == 0)
		mp->b_datap->db_type = M_IOCACK;
	else
		mp->b_datap->db_type = M_IOCNAK;
	qreply(q, mp);

	/* Conn was refheld in ip_sioctl_copyin_setup */
	if (CONN_Q(q))
		CONN_OPER_PENDING_DONE(Q_TO_CONN(q));
	if (entered_ipsq)
		ipsq_exit(ipsq, B_TRUE, B_TRUE);
}

/*
 * Search the ioctl command in the ioctl tables and return a pointer
 * to the ioctl command information. The ioctl command tables are
 * static and fully populated at compile time.
 */
ip_ioctl_cmd_t *
ip_sioctl_lookup(int ioc_cmd)
{
	int index;
	ip_ioctl_cmd_t *ipip;
	ip_ioctl_cmd_t *ipip_end;

	if (ioc_cmd == IPI_DONTCARE)
		return (NULL);

	/*
	 * Do a 2 step search. First search the indexed table
	 * based on the least significant byte of the ioctl cmd.
	 * If we don't find a match, then search the misc table
	 * serially.
	 */
	index = ioc_cmd & 0xFF;
	if (index < ip_ndx_ioctl_count) {
		ipip = &ip_ndx_ioctl_table[index];
		if (ipip->ipi_cmd == ioc_cmd) {
			/* Found a match in the ndx table */
			return (ipip);
		}
	}

	/* Search the misc table */
	ipip_end = &ip_misc_ioctl_table[ip_misc_ioctl_count];
	for (ipip = ip_misc_ioctl_table; ipip < ipip_end; ipip++) {
		if (ipip->ipi_cmd == ioc_cmd)
			/* Found a match in the misc table */
			return (ipip);
	}

	return (NULL);
}

/*
 * Wrapper function for resuming deferred ioctl processing
 * Used for SIOCGDSTINFO, SIOCGIP6ADDRPOLICY, SIOCGMSFILTER,
 * SIOCSMSFILTER, SIOCGIPMSFILTER, and SIOCSIPMSFILTER currently.
 */
/* ARGSUSED */
void
ip_sioctl_copyin_resume(ipsq_t *dummy_ipsq, queue_t *q, mblk_t *mp,
    void *dummy_arg)
{
	ip_sioctl_copyin_setup(q, mp);
}

/*
 * ip_sioctl_copyin_setup is called by ip_wput with any M_IOCTL message
 * that arrives.  Most of the IOCTLs are "socket" IOCTLs which we handle
 * in either I_STR or TRANSPARENT form, using the mi_copy facility.
 * We establish here the size of the block to be copied in.  mi_copyin
 * arranges for this to happen, an processing continues in ip_wput with
 * an M_IOCDATA message.
 */
void
ip_sioctl_copyin_setup(queue_t *q, mblk_t *mp)
{
	int	copyin_size;
	struct iocblk *iocp = (struct iocblk *)mp->b_rptr;
	ip_ioctl_cmd_t *ipip;
	cred_t *cr;

	ipip = ip_sioctl_lookup(iocp->ioc_cmd);
	if (ipip == NULL) {
		/*
		 * The ioctl is not one we understand or own.
		 * Pass it along to be processed down stream,
		 * if this is a module instance of IP, else nak
		 * the ioctl.
		 */
		if (q->q_next == NULL) {
			goto nak;
		} else {
			putnext(q, mp);
			return;
		}
	}

	/*
	 * If this is deferred, then we will do all the checks when we
	 * come back.
	 */
	if ((iocp->ioc_cmd == SIOCGDSTINFO ||
	    iocp->ioc_cmd == SIOCGIP6ADDRPOLICY) && !ip6_asp_can_lookup()) {
		ip6_asp_pending_op(q, mp, ip_sioctl_copyin_resume);
		return;
	}

	/*
	 * Only allow a very small subset of IP ioctls on this stream if
	 * IP is a module and not a driver. Allowing ioctls to be processed
	 * in this case may cause assert failures or data corruption.
	 * Typically G[L]IFFLAGS, SLIFNAME/IF_UNITSEL are the only few
	 * ioctls allowed on an IP module stream, after which this stream
	 * normally becomes a multiplexor (at which time the stream head
	 * will fail all ioctls).
	 */
	if ((q->q_next != NULL) && !(ipip->ipi_flags & IPI_MODOK)) {
		if (ipip->ipi_flags & IPI_PASS_DOWN) {
			/*
			 * Pass common Streams ioctls which the IP
			 * module does not own or consume along to
			 * be processed down stream.
			 */
			putnext(q, mp);
			return;
		} else {
			goto nak;
		}
	}

	/* Make sure we have ioctl data to process. */
	if (mp->b_cont == NULL && !(ipip->ipi_flags & IPI_NULL_BCONT))
		goto nak;

	/*
	 * Prefer dblk credential over ioctl credential; some synthesized
	 * ioctls have kcred set because there's no way to crhold()
	 * a credential in some contexts.  (ioc_cr is not crfree() by
	 * the framework; the caller of ioctl needs to hold the reference
	 * for the duration of the call).
	 */
	cr = DB_CREDDEF(mp, iocp->ioc_cr);

	/* Make sure normal users don't send down privileged ioctls */
	if ((ipip->ipi_flags & IPI_PRIV) &&
	    (cr != NULL) && secpolicy_net_config(cr, B_TRUE) != 0) {
		/* We checked the privilege earlier but log it here */
		miocnak(q, mp, 0, secpolicy_net_config(cr, B_FALSE));
		return;
	}

	/*
	 * The ioctl command tables can only encode fixed length
	 * ioctl data. If the length is variable, the table will
	 * encode the length as zero. Such special cases are handled
	 * below in the switch.
	 */
	if (ipip->ipi_copyin_size != 0) {
		mi_copyin(q, mp, NULL, ipip->ipi_copyin_size);
		return;
	}

	switch (iocp->ioc_cmd) {
	case O_SIOCGIFCONF:
	case SIOCGIFCONF:
		/*
		 * This IOCTL is hilarious.  See comments in
		 * ip_sioctl_get_ifconf for the story.
		 */
		if (iocp->ioc_count == TRANSPARENT)
			copyin_size = SIZEOF_STRUCT(ifconf,
			    iocp->ioc_flag);
		else
			copyin_size = iocp->ioc_count;
		mi_copyin(q, mp, NULL, copyin_size);
		return;

	case O_SIOCGLIFCONF:
	case SIOCGLIFCONF:
		copyin_size = SIZEOF_STRUCT(lifconf, iocp->ioc_flag);
		mi_copyin(q, mp, NULL, copyin_size);
		return;

	case SIOCGLIFSRCOF:
		copyin_size = SIZEOF_STRUCT(lifsrcof, iocp->ioc_flag);
		mi_copyin(q, mp, NULL, copyin_size);
		return;
	case SIOCGIP6ADDRPOLICY:
		ip_sioctl_ip6addrpolicy(q, mp);
		ip6_asp_table_refrele();
		return;

	case SIOCSIP6ADDRPOLICY:
		ip_sioctl_ip6addrpolicy(q, mp);
		return;

	case SIOCGDSTINFO:
		ip_sioctl_dstinfo(q, mp);
		ip6_asp_table_refrele();
		return;

	case I_PLINK:
	case I_PUNLINK:
	case I_LINK:
	case I_UNLINK:
		/*
		 * We treat non-persistent link similarly as the persistent
		 * link case, in terms of plumbing/unplumbing, as well as
		 * dynamic re-plumbing events indicator.  See comments
		 * in ip_sioctl_plink() for more.
		 *
		 * Request can be enqueued in the 'ipsq' while waiting
		 * to become exclusive. So bump up the conn ref.
		 */
		if (CONN_Q(q))
			CONN_INC_REF(Q_TO_CONN(q));
		ip_sioctl_plink(NULL, q, mp, NULL);
		return;

	case ND_GET:
	case ND_SET:
		/*
		 * Use of the nd table requires holding the reader lock.
		 * Modifying the nd table thru nd_load/nd_unload requires
		 * the writer lock.
		 */
		rw_enter(&ip_g_nd_lock, RW_READER);
		if (nd_getset(q, ip_g_nd, mp)) {
			rw_exit(&ip_g_nd_lock);

			if (iocp->ioc_error)
				iocp->ioc_count = 0;
			mp->b_datap->db_type = M_IOCACK;
			qreply(q, mp);
			return;
		}
		rw_exit(&ip_g_nd_lock);
		/*
		 * We don't understand this subioctl of ND_GET / ND_SET.
		 * Maybe intended for some driver / module below us
		 */
		if (q->q_next) {
			putnext(q, mp);
		} else {
			iocp->ioc_error = ENOENT;
			mp->b_datap->db_type = M_IOCNAK;
			iocp->ioc_count = 0;
			qreply(q, mp);
		}
		return;

	case IP_IOCTL:
		ip_wput_ioctl(q, mp);
		return;
	default:
		cmn_err(CE_PANIC, "should not happen ");
	}
nak:
	if (mp->b_cont != NULL) {
		freemsg(mp->b_cont);
		mp->b_cont = NULL;
	}
	iocp->ioc_error = EINVAL;
	mp->b_datap->db_type = M_IOCNAK;
	iocp->ioc_count = 0;
	qreply(q, mp);
}

/* ip_wput hands off ARP IOCTL responses to us */
void
ip_sioctl_iocack(queue_t *q, mblk_t *mp)
{
	struct arpreq *ar;
	struct xarpreq *xar;
	area_t	*area;
	mblk_t	*area_mp;
	struct iocblk *iocp;
	mblk_t	*orig_ioc_mp, *tmp;
	struct iocblk	*orig_iocp;
	ill_t *ill;
	conn_t *connp = NULL;
	uint_t ioc_id;
	mblk_t *pending_mp;
	int x_arp_ioctl = B_FALSE, ifx_arp_ioctl = B_FALSE;
	int *flagsp;
	char *storage = NULL;
	sin_t *sin;
	ipaddr_t addr;
	int err;

	ill = q->q_ptr;
	ASSERT(ill != NULL);

	/*
	 * We should get back from ARP a packet chain that looks like:
	 * M_IOCACK-->ARP_op_MBLK-->ORIG_M_IOCTL-->MI_COPY_MBLK-->[X]ARPREQ_MBLK
	 */
	if (!(area_mp = mp->b_cont) ||
	    (area_mp->b_wptr - area_mp->b_rptr) < sizeof (ip_sock_ar_t) ||
	    !(orig_ioc_mp = area_mp->b_cont) ||
	    !orig_ioc_mp->b_cont || !orig_ioc_mp->b_cont->b_cont) {
		freemsg(mp);
		return;
	}

	orig_iocp = (struct iocblk *)orig_ioc_mp->b_rptr;

	tmp = (orig_ioc_mp->b_cont)->b_cont;
	if ((orig_iocp->ioc_cmd == SIOCGXARP) ||
	    (orig_iocp->ioc_cmd == SIOCSXARP) ||
	    (orig_iocp->ioc_cmd == SIOCDXARP)) {
		x_arp_ioctl = B_TRUE;
		xar = (struct xarpreq *)tmp->b_rptr;
		sin = (sin_t *)&xar->xarp_pa;
		flagsp = &xar->xarp_flags;
		storage = xar->xarp_ha.sdl_data;
		if (xar->xarp_ha.sdl_nlen != 0)
			ifx_arp_ioctl = B_TRUE;
	} else {
		ar = (struct arpreq *)tmp->b_rptr;
		sin = (sin_t *)&ar->arp_pa;
		flagsp = &ar->arp_flags;
		storage = ar->arp_ha.sa_data;
	}

	iocp = (struct iocblk *)mp->b_rptr;

	/*
	 * Pick out the originating queue based on the ioc_id.
	 */
	ioc_id = iocp->ioc_id;
	pending_mp = ill_pending_mp_get(ill, &connp, ioc_id);
	if (pending_mp == NULL) {
		ASSERT(connp == NULL);
		inet_freemsg(mp);
		return;
	}
	ASSERT(connp != NULL);
	q = CONNP_TO_WQ(connp);

	/* Uncouple the internally generated IOCTL from the original one */
	area = (area_t *)area_mp->b_rptr;
	area_mp->b_cont = NULL;

	/*
	 * Restore the b_next and b_prev used by mi code. This is needed
	 * to complete the ioctl using mi* functions. We stored them in
	 * the pending mp prior to sending the request to ARP.
	 */
	orig_ioc_mp->b_cont->b_next = pending_mp->b_cont->b_next;
	orig_ioc_mp->b_cont->b_prev = pending_mp->b_cont->b_prev;
	inet_freemsg(pending_mp);

	/*
	 * We're done if there was an error or if this is not an SIOCG{X}ARP
	 * Catch the case where there is an IRE_CACHE by no entry in the
	 * arp table.
	 */
	addr = sin->sin_addr.s_addr;
	if (iocp->ioc_error && iocp->ioc_cmd == AR_ENTRY_SQUERY) {
		ire_t			*ire;
		dl_unitdata_req_t	*dlup;
		mblk_t			*llmp;
		int			addr_len;
		ill_t			*ipsqill = NULL;

		if (ifx_arp_ioctl) {
			/*
			 * There's no need to lookup the ill, since
			 * we've already done that when we started
			 * processing the ioctl and sent the message
			 * to ARP on that ill.  So use the ill that
			 * is stored in q->q_ptr.
			 */
			ipsqill = ill;
			ire = ire_ctable_lookup(addr, 0, IRE_CACHE,
			    ipsqill->ill_ipif, ALL_ZONES,
			    NULL, MATCH_IRE_TYPE | MATCH_IRE_ILL);
		} else {
			ire = ire_ctable_lookup(addr, 0, IRE_CACHE,
			    NULL, ALL_ZONES, NULL, MATCH_IRE_TYPE);
			if (ire != NULL)
				ipsqill = ire_to_ill(ire);
		}

		if ((x_arp_ioctl) && (ipsqill != NULL))
			storage += ill_xarp_info(&xar->xarp_ha, ipsqill);

		if (ire != NULL) {
			/*
			 * Since the ire obtained from cachetable is used for
			 * mac addr copying below, treat an incomplete ire as if
			 * as if we never found it.
			 */
			if (ire->ire_nce != NULL &&
			    ire->ire_nce->nce_state != ND_REACHABLE) {
				ire_refrele(ire);
				ire = NULL;
				ipsqill = NULL;
				goto errack;
			}
			*flagsp = ATF_INUSE;
			llmp = (ire->ire_nce != NULL ?
			    ire->ire_nce->nce_res_mp : NULL);
			if (llmp != NULL && ipsqill != NULL) {
				uchar_t *macaddr;

				addr_len = ipsqill->ill_phys_addr_length;
				if (x_arp_ioctl && ((addr_len +
				    ipsqill->ill_name_length) >
				    sizeof (xar->xarp_ha.sdl_data))) {
					ire_refrele(ire);
					freemsg(mp);
					ip_ioctl_finish(q, orig_ioc_mp,
					    EINVAL, NO_COPYOUT, NULL, NULL);
					return;
				}
				*flagsp |= ATF_COM;
				dlup = (dl_unitdata_req_t *)llmp->b_rptr;
				if (ipsqill->ill_sap_length < 0)
					macaddr = llmp->b_rptr +
					    dlup->dl_dest_addr_offset;
				else
					macaddr = llmp->b_rptr +
					    dlup->dl_dest_addr_offset +
					    ipsqill->ill_sap_length;
				/*
				 * For SIOCGARP, MAC address length
				 * validation has already been done
				 * before the ioctl was issued to ARP to
				 * allow it to progress only on 6 byte
				 * addressable (ethernet like) media. Thus
				 * the mac address copying can not overwrite
				 * the sa_data area below.
				 */
				bcopy(macaddr, storage, addr_len);
			}
			/* Ditch the internal IOCTL. */
			freemsg(mp);
			ire_refrele(ire);
			ip_ioctl_finish(q, orig_ioc_mp, 0, COPYOUT, NULL, NULL);
			return;
		}
	}

	/*
	 * Delete the coresponding IRE_CACHE if any.
	 * Reset the error if there was one (in case there was no entry
	 * in arp.)
	 */
	if (iocp->ioc_cmd == AR_ENTRY_DELETE) {
		ipif_t *ipintf = NULL;

		if (ifx_arp_ioctl) {
			/*
			 * There's no need to lookup the ill, since
			 * we've already done that when we started
			 * processing the ioctl and sent the message
			 * to ARP on that ill.  So use the ill that
			 * is stored in q->q_ptr.
			 */
			ipintf = ill->ill_ipif;
		}
		if (ip_ire_clookup_and_delete(addr, ipintf)) {
			/*
			 * The address in "addr" may be an entry for a
			 * router. If that's true, then any off-net
			 * IRE_CACHE entries that go through the router
			 * with address "addr" must be clobbered. Use
			 * ire_walk to achieve this goal.
			 */
			if (ifx_arp_ioctl)
				ire_walk_ill_v4(MATCH_IRE_ILL, 0,
				    ire_delete_cache_gw, (char *)&addr, ill);
			else
				ire_walk_v4(ire_delete_cache_gw, (char *)&addr,
				    ALL_ZONES);
			iocp->ioc_error = 0;
		}
	}
errack:
	if (iocp->ioc_error || iocp->ioc_cmd != AR_ENTRY_SQUERY) {
		err = iocp->ioc_error;
		freemsg(mp);
		ip_ioctl_finish(q, orig_ioc_mp, err, NO_COPYOUT, NULL, NULL);
		return;
	}

	/*
	 * Completion of an SIOCG{X}ARP.  Translate the information from
	 * the area_t into the struct {x}arpreq.
	 */
	if (x_arp_ioctl) {
		storage += ill_xarp_info(&xar->xarp_ha, ill);
		if ((ill->ill_phys_addr_length + ill->ill_name_length) >
		    sizeof (xar->xarp_ha.sdl_data)) {
			freemsg(mp);
			ip_ioctl_finish(q, orig_ioc_mp, EINVAL,
			    NO_COPYOUT, NULL, NULL);
			return;
		}
	}
	*flagsp = ATF_INUSE;
	if (area->area_flags & ACE_F_PERMANENT)
		*flagsp |= ATF_PERM;
	if (area->area_flags & ACE_F_PUBLISH)
		*flagsp |= ATF_PUBL;
	if (area->area_flags & ACE_F_AUTHORITY)
		*flagsp |= ATF_AUTHORITY;
	if (area->area_hw_addr_length != 0) {
		*flagsp |= ATF_COM;
		/*
		 * For SIOCGARP, MAC address length validation has
		 * already been done before the ioctl was issued to ARP
		 * to allow it to progress only on 6 byte addressable
		 * (ethernet like) media. Thus the mac address copying
		 * can not overwrite the sa_data area below.
		 */
		bcopy((char *)area + area->area_hw_addr_offset,
		    storage, area->area_hw_addr_length);
	}

	/* Ditch the internal IOCTL. */
	freemsg(mp);
	/* Complete the original. */
	ip_ioctl_finish(q, orig_ioc_mp, 0, COPYOUT, NULL, NULL);
}

/*
 * Create a new logical interface. If ipif_id is zero (i.e. not a logical
 * interface) create the next available logical interface for this
 * physical interface.
 * If ipif is NULL (i.e. the lookup didn't find one) attempt to create an
 * ipif with the specified name.
 *
 * If the address family is not AF_UNSPEC then set the address as well.
 *
 * If ip_sioctl_addr returns EINPROGRESS then the ioctl (the copyout)
 * is completed when the DL_BIND_ACK arrive in ip_rput_dlpi_writer.
 *
 * Executed as a writer on the ill or ill group.
 * So no lock is needed to traverse the ipif chain, or examine the
 * phyint flags.
 */
/* ARGSUSED */
int
ip_sioctl_addif(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *dummy_ipip, void *dummy_ifreq)
{
	mblk_t	*mp1;
	struct lifreq *lifr;
	boolean_t	isv6;
	boolean_t	exists;
	char 	*name;
	char	*endp;
	char	*cp;
	int	namelen;
	ipif_t	*ipif;
	long	id;
	ipsq_t	*ipsq;
	ill_t	*ill;
	sin_t	*sin;
	int	err = 0;
	boolean_t found_sep = B_FALSE;
	conn_t	*connp;
	zoneid_t zoneid;
	int	orig_ifindex = 0;

	ip1dbg(("ip_sioctl_addif\n"));
	/* Existence of mp1 has been checked in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	/*
	 * Null terminate the string to protect against buffer
	 * overrun. String was generated by user code and may not
	 * be trusted.
	 */
	lifr = (struct lifreq *)mp1->b_rptr;
	lifr->lifr_name[LIFNAMSIZ - 1] = '\0';
	name = lifr->lifr_name;
	ASSERT(CONN_Q(q));
	connp = Q_TO_CONN(q);
	isv6 = connp->conn_af_isv6;
	zoneid = connp->conn_zoneid;
	namelen = mi_strlen(name);
	if (namelen == 0)
		return (EINVAL);

	exists = B_FALSE;
	if ((namelen + 1 == sizeof (ipif_loopback_name)) &&
	    (mi_strcmp(name, ipif_loopback_name) == 0)) {
		/*
		 * Allow creating lo0 using SIOCLIFADDIF.
		 * can't be any other writer thread. So can pass null below
		 * for the last 4 args to ipif_lookup_name.
		 */
		ipif = ipif_lookup_on_name(lifr->lifr_name, namelen,
		    B_TRUE, &exists, isv6, zoneid, NULL, NULL, NULL, NULL);
		/* Prevent any further action */
		if (ipif == NULL) {
			return (ENOBUFS);
		} else if (!exists) {
			/* We created the ipif now and as writer */
			ipif_refrele(ipif);
			return (0);
		} else {
			ill = ipif->ipif_ill;
			ill_refhold(ill);
			ipif_refrele(ipif);
		}
	} else {
		/* Look for a colon in the name. */
		endp = &name[namelen];
		for (cp = endp; --cp > name; ) {
			if (*cp == IPIF_SEPARATOR_CHAR) {
				found_sep = B_TRUE;
				/*
				 * Reject any non-decimal aliases for plumbing
				 * of logical interfaces. Aliases with leading
				 * zeroes are also rejected as they introduce
				 * ambiguity in the naming of the interfaces.
				 * Comparing with "0" takes care of all such
				 * cases.
				 */
				if ((strncmp("0", cp+1, 1)) == 0)
					return (EINVAL);

				if (ddi_strtol(cp+1, &endp, 10, &id) != 0 ||
				    id <= 0 || *endp != '\0') {
					return (EINVAL);
				}
				*cp = '\0';
				break;
			}
		}
		ill = ill_lookup_on_name(name, B_FALSE, isv6,
		    CONNP_TO_WQ(connp), mp, ip_process_ioctl, &err, NULL);
		if (found_sep)
			*cp = IPIF_SEPARATOR_CHAR;
		if (ill == NULL)
			return (err);
	}

	ipsq = ipsq_try_enter(NULL, ill, q, mp, ip_process_ioctl, NEW_OP,
	    B_TRUE);

	/*
	 * Release the refhold due to the lookup, now that we are excl
	 * or we are just returning
	 */
	ill_refrele(ill);

	if (ipsq == NULL)
		return (EINPROGRESS);

	/*
	 * If the interface is failed, inactive or offlined, look for a working
	 * interface in the ill group and create the ipif there. If we can't
	 * find a good interface, create the ipif anyway so that in.mpathd can
	 * move it to the first repaired interface.
	 */
	if ((ill->ill_phyint->phyint_flags &
	    (PHYI_FAILED|PHYI_INACTIVE|PHYI_OFFLINE)) &&
	    ill->ill_phyint->phyint_groupname_len != 0) {
		phyint_t *phyi;
		char *groupname = ill->ill_phyint->phyint_groupname;

		/*
		 * We're looking for a working interface, but it doesn't matter
		 * if it's up or down; so instead of following the group lists,
		 * we look at each physical interface and compare the groupname.
		 * We're only interested in interfaces with IPv4 (resp. IPv6)
		 * plumbed when we're adding an IPv4 (resp. IPv6) ipif.
		 * Otherwise we create the ipif on the failed interface.
		 */
		rw_enter(&ill_g_lock, RW_READER);
		phyi = avl_first(&phyint_g_list.phyint_list_avl_by_index);
		for (; phyi != NULL;
		    phyi = avl_walk(&phyint_g_list.phyint_list_avl_by_index,
		    phyi, AVL_AFTER)) {
			if (phyi->phyint_groupname_len == 0)
				continue;
			ASSERT(phyi->phyint_groupname != NULL);
			if (mi_strcmp(groupname, phyi->phyint_groupname) == 0 &&
			    !(phyi->phyint_flags &
			    (PHYI_FAILED|PHYI_INACTIVE|PHYI_OFFLINE)) &&
			    (ill->ill_isv6 ? (phyi->phyint_illv6 != NULL) :
			    (phyi->phyint_illv4 != NULL))) {
				break;
			}
		}
		rw_exit(&ill_g_lock);

		if (phyi != NULL) {
			orig_ifindex = ill->ill_phyint->phyint_ifindex;
			ill = (ill->ill_isv6 ? phyi->phyint_illv6 :
			    phyi->phyint_illv4);
		}
	}

	/*
	 * We are now exclusive on the ipsq, so an ill move will be serialized
	 * before or after us.
	 */
	ASSERT(IAM_WRITER_ILL(ill));
	ASSERT(ill->ill_move_in_progress == B_FALSE);

	if (found_sep && orig_ifindex == 0) {
		/* Now see if there is an IPIF with this unit number. */
		for (ipif = ill->ill_ipif; ipif; ipif = ipif->ipif_next) {
			if (ipif->ipif_id == id) {
				err = EEXIST;
				goto done;
			}
		}
	}

	/*
	 * We use IRE_LOCAL for lo0:1 etc. for "receive only" use
	 * of lo0. We never come here when we plumb lo0:0. It
	 * happens in ipif_lookup_on_name.
	 * The specified unit number is ignored when we create the ipif on a
	 * different interface. However, we save it in ipif_orig_ipifid below so
	 * that the ipif fails back to the right position.
	 */
	if ((ipif = ipif_allocate(ill, (found_sep && orig_ifindex == 0) ?
	    id : -1, IRE_LOCAL, B_TRUE)) == NULL) {
		err = ENOBUFS;
		goto done;
	}

	/* Return created name with ioctl */
	(void) sprintf(lifr->lifr_name, "%s%c%d", ill->ill_name,
	    IPIF_SEPARATOR_CHAR, ipif->ipif_id);
	ip1dbg(("created %s\n", lifr->lifr_name));

	/* Set address */
	sin = (sin_t *)&lifr->lifr_addr;
	if (sin->sin_family != AF_UNSPEC) {
		err = ip_sioctl_addr(ipif, sin, q, mp,
		    &ip_ndx_ioctl_table[SIOCLIFADDR_NDX], lifr);
	}

	/* Set ifindex and unit number for failback */
	if (err == 0 && orig_ifindex != 0) {
		ipif->ipif_orig_ifindex = orig_ifindex;
		if (found_sep) {
			ipif->ipif_orig_ipifid = id;
		}
	}

done:
	ipsq_exit(ipsq, B_TRUE, B_TRUE);
	return (err);
}

/*
 * Remove an existing logical interface. If ipif_id is zero (i.e. not a logical
 * interface) delete it based on the IP address (on this physical interface).
 * Otherwise delete it based on the ipif_id.
 * Also, special handling to allow a removeif of lo0.
 */
/* ARGSUSED */
int
ip_sioctl_removeif(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_if_req)
{
	conn_t		*connp;
	ill_t		*ill = ipif->ipif_ill;
	boolean_t	 success;

	ip1dbg(("ip_sioctl_remove_if(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));

	connp = Q_TO_CONN(q);
	/*
	 * Special case for unplumbing lo0 (the loopback physical interface).
	 * If unplumbing lo0, the incoming address structure has been
	 * initialized to all zeros. When unplumbing lo0, all its logical
	 * interfaces must be removed too.
	 *
	 * Note that this interface may be called to remove a specific
	 * loopback logical interface (eg, lo0:1). But in that case
	 * ipif->ipif_id != 0 so that the code path for that case is the
	 * same as any other interface (meaning it skips the code directly
	 * below).
	 */
	if (ipif->ipif_id == 0 && ipif->ipif_net_type == IRE_LOOPBACK) {
		if (sin->sin_family == AF_UNSPEC &&
		    (IN6_IS_ADDR_UNSPECIFIED(&((sin6_t *)sin)->sin6_addr))) {
			/*
			 * Mark it condemned. No new ref. will be made to ill.
			 */
			mutex_enter(&ill->ill_lock);
			ill->ill_state_flags |= ILL_CONDEMNED;
			for (ipif = ill->ill_ipif; ipif != NULL;
			    ipif = ipif->ipif_next) {
				ipif->ipif_state_flags |= IPIF_CONDEMNED;
			}
			mutex_exit(&ill->ill_lock);

			ipif = ill->ill_ipif;
			/* unplumb the loopback interface */
			ill_delete(ill);
			mutex_enter(&connp->conn_lock);
			mutex_enter(&ill->ill_lock);
			ASSERT(ill->ill_group == NULL);

			/* Are any references to this ill active */
			if (ill_is_quiescent(ill)) {
				mutex_exit(&ill->ill_lock);
				mutex_exit(&connp->conn_lock);
				ill_delete_tail(ill);
				mi_free(ill);
				return (0);
			}
			success = ipsq_pending_mp_add(connp, ipif,
			    CONNP_TO_WQ(connp), mp, ILL_FREE);
			mutex_exit(&connp->conn_lock);
			mutex_exit(&ill->ill_lock);
			if (success)
				return (EINPROGRESS);
			else
				return (EINTR);
		}
	}

	/*
	 * We are exclusive on the ipsq, so an ill move will be serialized
	 * before or after us.
	 */
	ASSERT(ill->ill_move_in_progress == B_FALSE);

	if (ipif->ipif_id == 0) {
		/* Find based on address */
		if (ipif->ipif_isv6) {
			sin6_t *sin6;

			if (sin->sin_family != AF_INET6)
				return (EAFNOSUPPORT);

			sin6 = (sin6_t *)sin;
			/* We are a writer, so we should be able to lookup */
			ipif = ipif_lookup_addr_v6(&sin6->sin6_addr,
			    ill, ALL_ZONES, NULL, NULL, NULL, NULL);
			if (ipif == NULL) {
				/*
				 * Maybe the address in on another interface in
				 * the same IPMP group? We check this below.
				 */
				ipif = ipif_lookup_addr_v6(&sin6->sin6_addr,
				    NULL, ALL_ZONES, NULL, NULL, NULL, NULL);
			}
		} else {
			ipaddr_t addr;

			if (sin->sin_family != AF_INET)
				return (EAFNOSUPPORT);

			addr = sin->sin_addr.s_addr;
			/* We are a writer, so we should be able to lookup */
			ipif = ipif_lookup_addr(addr, ill, ALL_ZONES, NULL,
			    NULL, NULL, NULL);
			if (ipif == NULL) {
				/*
				 * Maybe the address in on another interface in
				 * the same IPMP group? We check this below.
				 */
				ipif = ipif_lookup_addr(addr, NULL, ALL_ZONES,
				    NULL, NULL, NULL, NULL);
			}
		}
		if (ipif == NULL) {
			return (EADDRNOTAVAIL);
		}
		/*
		 * When the address to be removed is hosted on a different
		 * interface, we check if the interface is in the same IPMP
		 * group as the specified one; if so we proceed with the
		 * removal.
		 * ill->ill_group is NULL when the ill is down, so we have to
		 * compare the group names instead.
		 */
		if (ipif->ipif_ill != ill &&
		    (ipif->ipif_ill->ill_phyint->phyint_groupname_len == 0 ||
		    ill->ill_phyint->phyint_groupname_len == 0 ||
		    mi_strcmp(ipif->ipif_ill->ill_phyint->phyint_groupname,
		    ill->ill_phyint->phyint_groupname) != 0)) {
			ipif_refrele(ipif);
			return (EADDRNOTAVAIL);
		}

		/* This is a writer */
		ipif_refrele(ipif);
	}

	/*
	 * Can not delete instance zero since it is tied to the ill.
	 */
	if (ipif->ipif_id == 0)
		return (EBUSY);

	mutex_enter(&ill->ill_lock);
	ipif->ipif_state_flags |= IPIF_CONDEMNED;
	mutex_exit(&ill->ill_lock);

	ipif_free(ipif);

	mutex_enter(&connp->conn_lock);
	mutex_enter(&ill->ill_lock);

	/* Are any references to this ipif active */
	if (ipif->ipif_refcnt == 0 && ipif->ipif_ire_cnt == 0) {
		mutex_exit(&ill->ill_lock);
		mutex_exit(&connp->conn_lock);
		ipif_non_duplicate(ipif);
		ipif_down_tail(ipif);
		ipif_free_tail(ipif);
		return (0);
	}
	success = ipsq_pending_mp_add(connp, ipif, CONNP_TO_WQ(connp), mp,
	    IPIF_FREE);
	mutex_exit(&ill->ill_lock);
	mutex_exit(&connp->conn_lock);
	if (success)
		return (EINPROGRESS);
	else
		return (EINTR);
}

/*
 * Restart the removeif ioctl. The refcnt has gone down to 0.
 * The ipif is already condemned. So can't find it thru lookups.
 */
/* ARGSUSED */
int
ip_sioctl_removeif_restart(ipif_t *ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *dummy_if_req)
{
	ill_t *ill;

	ip1dbg(("ip_sioctl_removeif_restart(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (ipif->ipif_id == 0 && ipif->ipif_net_type == IRE_LOOPBACK) {
		ill = ipif->ipif_ill;
		ASSERT(IAM_WRITER_ILL(ill));
		ASSERT((ipif->ipif_state_flags & IPIF_CONDEMNED) &&
		    (ill->ill_state_flags & IPIF_CONDEMNED));
		ill_delete_tail(ill);
		mi_free(ill);
		return (0);
	}

	ill = ipif->ipif_ill;
	ASSERT(IAM_WRITER_IPIF(ipif));
	ASSERT(ipif->ipif_state_flags & IPIF_CONDEMNED);

	ipif_non_duplicate(ipif);
	ipif_down_tail(ipif);
	ipif_free_tail(ipif);

	ILL_UNMARK_CHANGING(ill);
	return (0);
}

/*
 * Set the local interface address.
 * Allow an address of all zero when the interface is down.
 */
/* ARGSUSED */
int
ip_sioctl_addr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *dummy_ipip, void *dummy_ifreq)
{
	int err = 0;
	in6_addr_t v6addr;
	boolean_t need_up = B_FALSE;

	ip1dbg(("ip_sioctl_addr(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	ASSERT(IAM_WRITER_IPIF(ipif));

	if (ipif->ipif_isv6) {
		sin6_t *sin6;
		ill_t *ill;
		phyint_t *phyi;

		if (sin->sin_family != AF_INET6)
			return (EAFNOSUPPORT);

		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;
		ill = ipif->ipif_ill;
		phyi = ill->ill_phyint;

		/*
		 * Enforce that true multicast interfaces have a link-local
		 * address for logical unit 0.
		 */
		if (ipif->ipif_id == 0 &&
		    (ill->ill_flags & ILLF_MULTICAST) &&
		    !(ipif->ipif_flags & (IPIF_POINTOPOINT)) &&
		    !(phyi->phyint_flags & (PHYI_LOOPBACK)) &&
		    !IN6_IS_ADDR_LINKLOCAL(&v6addr)) {
			return (EADDRNOTAVAIL);
		}

		/*
		 * up interfaces shouldn't have the unspecified address
		 * unless they also have the IPIF_NOLOCAL flags set and
		 * have a subnet assigned.
		 */
		if ((ipif->ipif_flags & IPIF_UP) &&
		    IN6_IS_ADDR_UNSPECIFIED(&v6addr) &&
		    (!(ipif->ipif_flags & IPIF_NOLOCAL) ||
		    IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6subnet))) {
			return (EADDRNOTAVAIL);
		}

		if (!ip_local_addr_ok_v6(&v6addr, &ipif->ipif_v6net_mask))
			return (EADDRNOTAVAIL);
	} else {
		ipaddr_t addr;

		if (sin->sin_family != AF_INET)
			return (EAFNOSUPPORT);

		addr = sin->sin_addr.s_addr;

		/* Allow 0 as the local address. */
		if (addr != 0 && !ip_addr_ok_v4(addr, ipif->ipif_net_mask))
			return (EADDRNOTAVAIL);

		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
	}


	/*
	 * Even if there is no change we redo things just to rerun
	 * ipif_set_default.
	 */
	if (ipif->ipif_flags & IPIF_UP) {
		/*
		 * Setting a new local address, make sure
		 * we have net and subnet bcast ire's for
		 * the old address if we need them.
		 */
		if (!ipif->ipif_isv6)
			ipif_check_bcast_ires(ipif);
		/*
		 * If the interface is already marked up,
		 * we call ipif_down which will take care
		 * of ditching any IREs that have been set
		 * up based on the old interface address.
		 */
		err = ipif_logical_down(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
		need_up = 1;
	}

	err = ip_sioctl_addr_tail(ipif, sin, q, mp, need_up);
	return (err);
}

int
ip_sioctl_addr_tail(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    boolean_t need_up)
{
	in6_addr_t v6addr;
	ipaddr_t addr;
	sin6_t	*sin6;
	int	err = 0;
	ill_t	*ill = ipif->ipif_ill;
	boolean_t need_dl_down;
	boolean_t need_arp_down;

	ip1dbg(("ip_sioctl_addr_tail(%s:%u %p)\n",
	    ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));

	/* Must cancel any pending timer before taking the ill_lock */
	if (ipif->ipif_recovery_id != 0)
		(void) untimeout(ipif->ipif_recovery_id);
	ipif->ipif_recovery_id = 0;

	if (ipif->ipif_isv6) {
		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;
	} else {
		addr = sin->sin_addr.s_addr;
		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
	}
	mutex_enter(&ill->ill_lock);
	ipif->ipif_v6lcl_addr = v6addr;
	if (ipif->ipif_flags & (IPIF_ANYCAST | IPIF_NOLOCAL)) {
		ipif->ipif_v6src_addr = ipv6_all_zeros;
	} else {
		ipif->ipif_v6src_addr = v6addr;
	}
	ipif->ipif_addr_ready = 0;

	/*
	 * If the interface was previously marked as a duplicate, then since
	 * we've now got a "new" address, it should no longer be considered a
	 * duplicate -- even if the "new" address is the same as the old one.
	 * Note that if all ipifs are down, we may have a pending ARP down
	 * event to handle.  This is because we want to recover from duplicates
	 * and thus delay tearing down ARP until the duplicates have been
	 * removed or disabled.
	 */
	need_dl_down = need_arp_down = B_FALSE;
	if (ipif->ipif_flags & IPIF_DUPLICATE) {
		need_arp_down = !need_up;
		ipif->ipif_flags &= ~IPIF_DUPLICATE;
		if (--ill->ill_ipif_dup_count == 0 && !need_up &&
		    ill->ill_ipif_up_count == 0 && ill->ill_dl_up) {
			need_dl_down = B_TRUE;
		}
	}

	if (ipif->ipif_isv6 && IN6_IS_ADDR_6TO4(&v6addr) &&
	    !ill->ill_is_6to4tun) {
		queue_t *wqp = ill->ill_wq;

		/*
		 * The local address of this interface is a 6to4 address,
		 * check if this interface is in fact a 6to4 tunnel or just
		 * an interface configured with a 6to4 address.  We are only
		 * interested in the former.
		 */
		if (wqp != NULL) {
			while ((wqp->q_next != NULL) &&
			    (wqp->q_next->q_qinfo != NULL) &&
			    (wqp->q_next->q_qinfo->qi_minfo != NULL)) {

				if (wqp->q_next->q_qinfo->qi_minfo->mi_idnum
				    == TUN6TO4_MODID) {
					/* set for use in IP */
					ill->ill_is_6to4tun = 1;
					break;
				}
				wqp = wqp->q_next;
			}
		}
	}

	ipif_set_default(ipif);
	mutex_exit(&ill->ill_lock);

	if (need_up) {
		/*
		 * Now bring the interface back up.  If this
		 * is the only IPIF for the ILL, ipif_up
		 * will have to re-bind to the device, so
		 * we may get back EINPROGRESS, in which
		 * case, this IOCTL will get completed in
		 * ip_rput_dlpi when we see the DL_BIND_ACK.
		 */
		err = ipif_up(ipif, q, mp);
	} else {
		/*
		 * Update the IPIF list in SCTP, ipif_up_done() will do it
		 * if need_up is true.
		 */
		sctp_update_ipif(ipif, SCTP_IPIF_UPDATE);
	}

	if (need_dl_down)
		ill_dl_down(ill);
	if (need_arp_down)
		ipif_arp_down(ipif);

	return (err);
}


/*
 * Restart entry point to restart the address set operation after the
 * refcounts have dropped to zero.
 */
/* ARGSUSED */
int
ip_sioctl_addr_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	ip1dbg(("ip_sioctl_addr_restart(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));
	ipif_down_tail(ipif);
	return (ip_sioctl_addr_tail(ipif, sin, q, mp, B_TRUE));
}

/* ARGSUSED */
int
ip_sioctl_get_addr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	sin6_t *sin6 = (struct sockaddr_in6 *)sin;
	struct lifreq *lifr = (struct lifreq *)if_req;

	ip1dbg(("ip_sioctl_get_addr(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/*
	 * The net mask and address can't change since we have a
	 * reference to the ipif. So no lock is necessary.
	 */
	if (ipif->ipif_isv6) {
		*sin6 = sin6_null;
		sin6->sin6_family = AF_INET6;
		sin6->sin6_addr = ipif->ipif_v6lcl_addr;
		ASSERT(ipip->ipi_cmd_type == LIF_CMD);
		lifr->lifr_addrlen =
		    ip_mask_to_plen_v6(&ipif->ipif_v6net_mask);
	} else {
		*sin = sin_null;
		sin->sin_family = AF_INET;
		sin->sin_addr.s_addr = ipif->ipif_lcl_addr;
		if (ipip->ipi_cmd_type == LIF_CMD) {
			lifr->lifr_addrlen =
			    ip_mask_to_plen(ipif->ipif_net_mask);
		}
	}
	return (0);
}

/*
 * Set the destination address for a pt-pt interface.
 */
/* ARGSUSED */
int
ip_sioctl_dstaddr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int err = 0;
	in6_addr_t v6addr;
	boolean_t need_up = B_FALSE;

	ip1dbg(("ip_sioctl_dstaddr(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));

	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		if (sin->sin_family != AF_INET6)
			return (EAFNOSUPPORT);

		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;

		if (!ip_remote_addr_ok_v6(&v6addr, &ipif->ipif_v6net_mask))
			return (EADDRNOTAVAIL);
	} else {
		ipaddr_t addr;

		if (sin->sin_family != AF_INET)
			return (EAFNOSUPPORT);

		addr = sin->sin_addr.s_addr;
		if (!ip_addr_ok_v4(addr, ipif->ipif_net_mask))
			return (EADDRNOTAVAIL);

		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
	}

	if (IN6_ARE_ADDR_EQUAL(&ipif->ipif_v6pp_dst_addr, &v6addr))
		return (0);	/* No change */

	if (ipif->ipif_flags & IPIF_UP) {
		/*
		 * If the interface is already marked up,
		 * we call ipif_down which will take care
		 * of ditching any IREs that have been set
		 * up based on the old pp dst address.
		 */
		err = ipif_logical_down(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
		need_up = B_TRUE;
	}
	/*
	 * could return EINPROGRESS. If so ioctl will complete in
	 * ip_rput_dlpi_writer
	 */
	err = ip_sioctl_dstaddr_tail(ipif, sin, q, mp, need_up);
	return (err);
}

static int
ip_sioctl_dstaddr_tail(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    boolean_t need_up)
{
	in6_addr_t v6addr;
	ill_t	*ill = ipif->ipif_ill;
	int	err = 0;
	boolean_t need_dl_down;
	boolean_t need_arp_down;

	ip1dbg(("ip_sioctl_dstaddr_tail(%s:%u %p)\n", ill->ill_name,
	    ipif->ipif_id, (void *)ipif));

	/* Must cancel any pending timer before taking the ill_lock */
	if (ipif->ipif_recovery_id != 0)
		(void) untimeout(ipif->ipif_recovery_id);
	ipif->ipif_recovery_id = 0;

	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;
	} else {
		ipaddr_t addr;

		addr = sin->sin_addr.s_addr;
		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
	}
	mutex_enter(&ill->ill_lock);
	/* Set point to point destination address. */
	if ((ipif->ipif_flags & IPIF_POINTOPOINT) == 0) {
		/*
		 * Allow this as a means of creating logical
		 * pt-pt interfaces on top of e.g. an Ethernet.
		 * XXX Undocumented HACK for testing.
		 * pt-pt interfaces are created with NUD disabled.
		 */
		ipif->ipif_flags |= IPIF_POINTOPOINT;
		ipif->ipif_flags &= ~IPIF_BROADCAST;
		if (ipif->ipif_isv6)
			ill->ill_flags |= ILLF_NONUD;
	}

	/*
	 * If the interface was previously marked as a duplicate, then since
	 * we've now got a "new" address, it should no longer be considered a
	 * duplicate -- even if the "new" address is the same as the old one.
	 * Note that if all ipifs are down, we may have a pending ARP down
	 * event to handle.
	 */
	need_dl_down = need_arp_down = B_FALSE;
	if (ipif->ipif_flags & IPIF_DUPLICATE) {
		need_arp_down = !need_up;
		ipif->ipif_flags &= ~IPIF_DUPLICATE;
		if (--ill->ill_ipif_dup_count == 0 && !need_up &&
		    ill->ill_ipif_up_count == 0 && ill->ill_dl_up) {
			need_dl_down = B_TRUE;
		}
	}

	/* Set the new address. */
	ipif->ipif_v6pp_dst_addr = v6addr;
	/* Make sure subnet tracks pp_dst */
	ipif->ipif_v6subnet = ipif->ipif_v6pp_dst_addr;
	mutex_exit(&ill->ill_lock);

	if (need_up) {
		/*
		 * Now bring the interface back up.  If this
		 * is the only IPIF for the ILL, ipif_up
		 * will have to re-bind to the device, so
		 * we may get back EINPROGRESS, in which
		 * case, this IOCTL will get completed in
		 * ip_rput_dlpi when we see the DL_BIND_ACK.
		 */
		err = ipif_up(ipif, q, mp);
	}

	if (need_dl_down)
		ill_dl_down(ill);

	if (need_arp_down)
		ipif_arp_down(ipif);
	return (err);
}

/*
 * Restart entry point to restart the dstaddress set operation after the
 * refcounts have dropped to zero.
 */
/* ARGSUSED */
int
ip_sioctl_dstaddr_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	ip1dbg(("ip_sioctl_dstaddr_restart(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ipif_down_tail(ipif);
	return (ip_sioctl_dstaddr_tail(ipif, sin, q, mp, B_TRUE));
}

/* ARGSUSED */
int
ip_sioctl_get_dstaddr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	sin6_t	*sin6 = (struct sockaddr_in6 *)sin;

	ip1dbg(("ip_sioctl_get_dstaddr(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/*
	 * Get point to point destination address. The addresses can't
	 * change since we hold a reference to the ipif.
	 */
	if ((ipif->ipif_flags & IPIF_POINTOPOINT) == 0)
		return (EADDRNOTAVAIL);

	if (ipif->ipif_isv6) {
		ASSERT(ipip->ipi_cmd_type == LIF_CMD);
		*sin6 = sin6_null;
		sin6->sin6_family = AF_INET6;
		sin6->sin6_addr = ipif->ipif_v6pp_dst_addr;
	} else {
		*sin = sin_null;
		sin->sin_family = AF_INET;
		sin->sin_addr.s_addr = ipif->ipif_pp_dst_addr;
	}
	return (0);
}

/*
 * part of ipmp, make this func return the active/inactive state and
 * caller can set once atomically instead of multiple mutex_enter/mutex_exit
 */
/*
 * This function either sets or clears the IFF_INACTIVE flag.
 *
 * As long as there are some addresses or multicast memberships on the
 * IPv4 or IPv6 interface of the "phyi" that does not belong in here, we
 * will consider it to be ACTIVE (clear IFF_INACTIVE) i.e the interface
 * will be used for outbound packets.
 *
 * Caller needs to verify the validity of setting IFF_INACTIVE.
 */
static void
phyint_inactive(phyint_t *phyi)
{
	ill_t *ill_v4;
	ill_t *ill_v6;
	ipif_t *ipif;
	ilm_t *ilm;

	ill_v4 = phyi->phyint_illv4;
	ill_v6 = phyi->phyint_illv6;

	/*
	 * No need for a lock while traversing the list since iam
	 * a writer
	 */
	if (ill_v4 != NULL) {
		ASSERT(IAM_WRITER_ILL(ill_v4));
		for (ipif = ill_v4->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (ipif->ipif_orig_ifindex != phyi->phyint_ifindex) {
				mutex_enter(&phyi->phyint_lock);
				phyi->phyint_flags &= ~PHYI_INACTIVE;
				mutex_exit(&phyi->phyint_lock);
				return;
			}
		}
		for (ilm = ill_v4->ill_ilm; ilm != NULL;
		    ilm = ilm->ilm_next) {
			if (ilm->ilm_orig_ifindex != phyi->phyint_ifindex) {
				mutex_enter(&phyi->phyint_lock);
				phyi->phyint_flags &= ~PHYI_INACTIVE;
				mutex_exit(&phyi->phyint_lock);
				return;
			}
		}
	}
	if (ill_v6 != NULL) {
		ill_v6 = phyi->phyint_illv6;
		for (ipif = ill_v6->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (ipif->ipif_orig_ifindex != phyi->phyint_ifindex) {
				mutex_enter(&phyi->phyint_lock);
				phyi->phyint_flags &= ~PHYI_INACTIVE;
				mutex_exit(&phyi->phyint_lock);
				return;
			}
		}
		for (ilm = ill_v6->ill_ilm; ilm != NULL;
		    ilm = ilm->ilm_next) {
			if (ilm->ilm_orig_ifindex != phyi->phyint_ifindex) {
				mutex_enter(&phyi->phyint_lock);
				phyi->phyint_flags &= ~PHYI_INACTIVE;
				mutex_exit(&phyi->phyint_lock);
				return;
			}
		}
	}
	mutex_enter(&phyi->phyint_lock);
	phyi->phyint_flags |= PHYI_INACTIVE;
	mutex_exit(&phyi->phyint_lock);
}

/*
 * This function is called only when the phyint flags change. Currently
 * called from ip_sioctl_flags. We re-do the broadcast nomination so
 * that we can select a good ill.
 */
static void
ip_redo_nomination(phyint_t *phyi)
{
	ill_t *ill_v4;

	ill_v4 = phyi->phyint_illv4;

	if (ill_v4 != NULL && ill_v4->ill_group != NULL) {
		ASSERT(IAM_WRITER_ILL(ill_v4));
		if (ill_v4->ill_group->illgrp_ill_count > 1)
			ill_nominate_bcast_rcv(ill_v4->ill_group);
	}
}

/*
 * Heuristic to check if ill is INACTIVE.
 * Checks if ill has an ipif with an usable ip address.
 *
 * Return values:
 *	B_TRUE	- ill is INACTIVE; has no usable ipif
 *	B_FALSE - ill is not INACTIVE; ill has at least one usable ipif
 */
static boolean_t
ill_is_inactive(ill_t *ill)
{
	ipif_t *ipif;

	/* Check whether it is in an IPMP group */
	if (ill->ill_phyint->phyint_groupname == NULL)
		return (B_FALSE);

	if (ill->ill_ipif_up_count == 0)
		return (B_TRUE);

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		uint64_t flags = ipif->ipif_flags;

		/*
		 * This ipif is usable if it is IPIF_UP and not a
		 * dedicated test address.  A dedicated test address
		 * is marked IPIF_NOFAILOVER *and* IPIF_DEPRECATED
		 * (note in particular that V6 test addresses are
		 * link-local data addresses and thus are marked
		 * IPIF_NOFAILOVER but not IPIF_DEPRECATED).
		 */
		if ((flags & IPIF_UP) &&
		    ((flags & (IPIF_DEPRECATED|IPIF_NOFAILOVER)) !=
		    (IPIF_DEPRECATED|IPIF_NOFAILOVER)))
			return (B_FALSE);
	}
	return (B_TRUE);
}

/*
 * Set interface flags.
 * Need to do special action for IPIF_UP, IPIF_DEPRECATED, IPIF_NOXMIT,
 * IPIF_NOLOCAL, ILLF_NONUD, ILLF_NOARP, IPIF_PRIVATE, IPIF_ANYCAST,
 * IPIF_PREFERRED, PHYI_STANDBY, PHYI_FAILED and PHYI_OFFLINE.
 *
 * NOTE : We really don't enforce that ipif_id zero should be used
 *	  for setting any flags other than IFF_LOGINT_FLAGS. This
 *	  is because applications generally does SICGLIFFLAGS and
 *	  ORs in the new flags (that affects the logical) and does a
 *	  SIOCSLIFFLAGS. Thus, "flags" below could contain bits other
 *	  than IFF_LOGINT_FLAGS. One could check whether "turn_on" - the
 *	  flags that will be turned on is correct with respect to
 *	  ipif_id 0. For backward compatibility reasons, it is not done.
 */
/* ARGSUSED */
int
ip_sioctl_flags(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	uint64_t turn_on;
	uint64_t turn_off;
	int	err;
	boolean_t need_up = B_FALSE;
	phyint_t *phyi;
	ill_t *ill;
	uint64_t intf_flags;
	boolean_t phyint_flags_modified = B_FALSE;
	uint64_t flags;
	struct ifreq *ifr;
	struct lifreq *lifr;
	boolean_t set_linklocal = B_FALSE;
	boolean_t zero_source = B_FALSE;

	ip1dbg(("ip_sioctl_flags(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	ASSERT(IAM_WRITER_IPIF(ipif));

	ill = ipif->ipif_ill;
	phyi = ill->ill_phyint;

	if (ipip->ipi_cmd_type == IF_CMD) {
		ifr = (struct ifreq *)if_req;
		flags =  (uint64_t)(ifr->ifr_flags & 0x0000ffff);
	} else {
		lifr = (struct lifreq *)if_req;
		flags = lifr->lifr_flags;
	}

	intf_flags = ipif->ipif_flags | ill->ill_flags | phyi->phyint_flags;

	/*
	 * Has the flags been set correctly till now ?
	 */
	ASSERT((phyi->phyint_flags & ~(IFF_PHYINT_FLAGS)) == 0);
	ASSERT((ill->ill_flags & ~(IFF_PHYINTINST_FLAGS)) == 0);
	ASSERT((ipif->ipif_flags & ~(IFF_LOGINT_FLAGS)) == 0);
	/*
	 * Compare the new flags to the old, and partition
	 * into those coming on and those going off.
	 * For the 16 bit command keep the bits above bit 16 unchanged.
	 */
	if (ipip->ipi_cmd == SIOCSIFFLAGS)
		flags |= intf_flags & ~0xFFFF;

	/*
	 * First check which bits will change and then which will
	 * go on and off
	 */
	turn_on = (flags ^ intf_flags) & ~IFF_CANTCHANGE;
	if (!turn_on)
		return (0);	/* No change */

	turn_off = intf_flags & turn_on;
	turn_on ^= turn_off;
	err = 0;

	/*
	 * Don't allow any bits belonging to the logical interface
	 * to be set or cleared on the replacement ipif that was
	 * created temporarily during a MOVE.
	 */
	if (ipif->ipif_replace_zero &&
	    ((turn_on|turn_off) & IFF_LOGINT_FLAGS) != 0) {
		return (EINVAL);
	}

	/*
	 * Only allow the IFF_XRESOLV and IFF_TEMPORARY flags to be set on
	 * IPv6 interfaces.
	 */
	if ((turn_on & (IFF_XRESOLV|IFF_TEMPORARY)) && !(ipif->ipif_isv6))
		return (EINVAL);

	/*
	 * Don't allow the IFF_ROUTER flag to be turned on on loopback
	 * interfaces.  It makes no sense in that context.
	 */
	if ((turn_on & IFF_ROUTER) && (phyi->phyint_flags & PHYI_LOOPBACK))
		return (EINVAL);

	if (flags & (IFF_NOLOCAL|IFF_ANYCAST))
		zero_source = B_TRUE;

	/*
	 * For IPv6 ipif_id 0, don't allow the interface to be up without
	 * a link local address if IFF_NOLOCAL or IFF_ANYCAST are not set.
	 * If the link local address isn't set, and can be set, it will get
	 * set later on in this function.
	 */
	if (ipif->ipif_id == 0 && ipif->ipif_isv6 &&
	    (flags & IFF_UP) && !zero_source &&
	    IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr)) {
		if (ipif_cant_setlinklocal(ipif))
			return (EINVAL);
		set_linklocal = B_TRUE;
	}

	/*
	 * ILL cannot be part of a usesrc group and and IPMP group at the
	 * same time. No need to grab ill_g_usesrc_lock here, see
	 * synchronization notes in ip.c
	 */
	if (turn_on & PHYI_STANDBY &&
	    ipif->ipif_ill->ill_usesrc_grp_next != NULL) {
		return (EINVAL);
	}

	/*
	 * If we modify physical interface flags, we'll potentially need to
	 * send up two routing socket messages for the changes (one for the
	 * IPv4 ill, and another for the IPv6 ill).  Note that here.
	 */
	if ((turn_on|turn_off) & IFF_PHYINT_FLAGS)
		phyint_flags_modified = B_TRUE;

	/*
	 * If we are setting or clearing FAILED or STANDBY or OFFLINE,
	 * we need to flush the IRE_CACHES belonging to this ill.
	 * We handle this case here without doing the DOWN/UP dance
	 * like it is done for other flags. If some other flags are
	 * being turned on/off with FAILED/STANDBY/OFFLINE, the code
	 * below will handle it by bringing it down and then
	 * bringing it UP.
	 */
	if ((turn_on|turn_off) & (PHYI_FAILED|PHYI_STANDBY|PHYI_OFFLINE)) {
		ill_t *ill_v4, *ill_v6;

		ill_v4 = phyi->phyint_illv4;
		ill_v6 = phyi->phyint_illv6;

		/*
		 * First set the INACTIVE flag if needed. Then delete the ires.
		 * ire_add will atomically prevent creating new IRE_CACHEs
		 * unless hidden flag is set.
		 * PHYI_FAILED and PHYI_INACTIVE are exclusive
		 */
		if ((turn_on & PHYI_FAILED) &&
		    ((intf_flags & PHYI_STANDBY) || !ipmp_enable_failback)) {
			/* Reset PHYI_INACTIVE when PHYI_FAILED is being set */
			phyi->phyint_flags &= ~PHYI_INACTIVE;
		}
		if ((turn_off & PHYI_FAILED) &&
		    ((intf_flags & PHYI_STANDBY) ||
		    (!ipmp_enable_failback && ill_is_inactive(ill)))) {
			phyint_inactive(phyi);
		}

		if (turn_on & PHYI_STANDBY) {
			/*
			 * We implicitly set INACTIVE only when STANDBY is set.
			 * INACTIVE is also set on non-STANDBY phyint when user
			 * disables FAILBACK using configuration file.
			 * Do not allow STANDBY to be set on such INACTIVE
			 * phyint
			 */
			if (phyi->phyint_flags & PHYI_INACTIVE)
				return (EINVAL);
			if (!(phyi->phyint_flags & PHYI_FAILED))
				phyint_inactive(phyi);
		}
		if (turn_off & PHYI_STANDBY) {
			if (ipmp_enable_failback) {
				/*
				 * Reset PHYI_INACTIVE.
				 */
				phyi->phyint_flags &= ~PHYI_INACTIVE;
			} else if (ill_is_inactive(ill) &&
			    !(phyi->phyint_flags & PHYI_FAILED)) {
				/*
				 * Need to set INACTIVE, when user sets
				 * STANDBY on a non-STANDBY phyint and
				 * later resets STANDBY
				 */
				phyint_inactive(phyi);
			}
		}
		/*
		 * We should always send up a message so that the
		 * daemons come to know of it. Note that the zeroth
		 * interface can be down and the check below for IPIF_UP
		 * will not make sense as we are actually setting
		 * a phyint flag here. We assume that the ipif used
		 * is always the zeroth ipif. (ip_rts_ifmsg does not
		 * send up any message for non-zero ipifs).
		 */
		phyint_flags_modified = B_TRUE;

		if (ill_v4 != NULL) {
			ire_walk_ill_v4(MATCH_IRE_ILL | MATCH_IRE_TYPE,
			    IRE_CACHE, ill_stq_cache_delete,
			    (char *)ill_v4, ill_v4);
			illgrp_reset_schednext(ill_v4);
		}
		if (ill_v6 != NULL) {
			ire_walk_ill_v6(MATCH_IRE_ILL | MATCH_IRE_TYPE,
			    IRE_CACHE, ill_stq_cache_delete,
			    (char *)ill_v6, ill_v6);
			illgrp_reset_schednext(ill_v6);
		}
	}

	/*
	 * If ILLF_ROUTER changes, we need to change the ip forwarding
	 * status of the interface and, if the interface is part of an IPMP
	 * group, all other interfaces that are part of the same IPMP
	 * group.
	 */
	if ((turn_on | turn_off) & ILLF_ROUTER) {
		(void) ill_forward_set(q, mp, ((turn_on & ILLF_ROUTER) != 0),
		    (caddr_t)ill);
	}

	/*
	 * If the interface is not UP and we are not going to
	 * bring it UP, record the flags and return. When the
	 * interface comes UP later, the right actions will be
	 * taken.
	 */
	if (!(ipif->ipif_flags & IPIF_UP) &&
	    !(turn_on & IPIF_UP)) {
		/* Record new flags in their respective places. */
		mutex_enter(&ill->ill_lock);
		mutex_enter(&ill->ill_phyint->phyint_lock);
		ipif->ipif_flags |= (turn_on & IFF_LOGINT_FLAGS);
		ipif->ipif_flags &= (~turn_off & IFF_LOGINT_FLAGS);
		ill->ill_flags |= (turn_on & IFF_PHYINTINST_FLAGS);
		ill->ill_flags &= (~turn_off & IFF_PHYINTINST_FLAGS);
		phyi->phyint_flags |= (turn_on & IFF_PHYINT_FLAGS);
		phyi->phyint_flags &= (~turn_off & IFF_PHYINT_FLAGS);
		mutex_exit(&ill->ill_lock);
		mutex_exit(&ill->ill_phyint->phyint_lock);

		/*
		 * We do the broadcast and nomination here rather
		 * than waiting for a FAILOVER/FAILBACK to happen. In
		 * the case of FAILBACK from INACTIVE standby to the
		 * interface that has been repaired, PHYI_FAILED has not
		 * been cleared yet. If there are only two interfaces in
		 * that group, all we have is a FAILED and INACTIVE
		 * interface. If we do the nomination soon after a failback,
		 * the broadcast nomination code would select the
		 * INACTIVE interface for receiving broadcasts as FAILED is
		 * not yet cleared. As we don't want STANDBY/INACTIVE to
		 * receive broadcast packets, we need to redo nomination
		 * when the FAILED is cleared here. Thus, in general we
		 * always do the nomination here for FAILED, STANDBY
		 * and OFFLINE.
		 */
		if (((turn_on | turn_off) &
		    (PHYI_FAILED|PHYI_STANDBY|PHYI_OFFLINE))) {
			ip_redo_nomination(phyi);
		}
		if (phyint_flags_modified) {
			if (phyi->phyint_illv4 != NULL) {
				ip_rts_ifmsg(phyi->phyint_illv4->
				    ill_ipif);
			}
			if (phyi->phyint_illv6 != NULL) {
				ip_rts_ifmsg(phyi->phyint_illv6->
				    ill_ipif);
			}
		}
		return (0);
	} else if (set_linklocal || zero_source) {
		mutex_enter(&ill->ill_lock);
		if (set_linklocal)
			ipif->ipif_state_flags |= IPIF_SET_LINKLOCAL;
		if (zero_source)
			ipif->ipif_state_flags |= IPIF_ZERO_SOURCE;
		mutex_exit(&ill->ill_lock);
	}

	/*
	 * Disallow IPv6 interfaces coming up that have the unspecified address,
	 * or point-to-point interfaces with an unspecified destination. We do
	 * allow the address to be unspecified for IPIF_NOLOCAL interfaces that
	 * have a subnet assigned, which is how in.ndpd currently manages its
	 * onlink prefix list when no addresses are configured with those
	 * prefixes.
	 */
	if (ipif->ipif_isv6 &&
	    ((IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr) &&
	    (!(ipif->ipif_flags & IPIF_NOLOCAL) && !(turn_on & IPIF_NOLOCAL) ||
	    IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6subnet))) ||
	    ((ipif->ipif_flags & IPIF_POINTOPOINT) &&
	    IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6pp_dst_addr)))) {
		return (EINVAL);
	}

	/*
	 * Prevent IPv4 point-to-point interfaces with a 0.0.0.0 destination
	 * from being brought up.
	 */
	if (!ipif->ipif_isv6 &&
	    ((ipif->ipif_flags & IPIF_POINTOPOINT) &&
	    ipif->ipif_pp_dst_addr == INADDR_ANY)) {
		return (EINVAL);
	}

	/*
	 * The only flag changes that we currently take specific action on
	 * is IPIF_UP, IPIF_DEPRECATED, IPIF_NOXMIT, IPIF_NOLOCAL,
	 * ILLF_NOARP, ILLF_NONUD, IPIF_PRIVATE, IPIF_ANYCAST, and
	 * IPIF_PREFERRED.  This is done by bring the ipif down, changing
	 * the flags and bringing it back up again.
	 */
	if ((turn_on|turn_off) &
	    (IPIF_UP|IPIF_DEPRECATED|IPIF_NOXMIT|IPIF_NOLOCAL|ILLF_NOARP|
	    ILLF_NONUD|IPIF_PRIVATE|IPIF_ANYCAST|IPIF_PREFERRED)) {
		/*
		 * Taking this ipif down, make sure we have
		 * valid net and subnet bcast ire's for other
		 * logical interfaces, if we need them.
		 */
		if (!ipif->ipif_isv6)
			ipif_check_bcast_ires(ipif);

		if (((ipif->ipif_flags | turn_on) & IPIF_UP) &&
		    !(turn_off & IPIF_UP)) {
			need_up = B_TRUE;
			if (ipif->ipif_flags & IPIF_UP)
				ill->ill_logical_down = 1;
			turn_on &= ~IPIF_UP;
		}
		err = ipif_down(ipif, q, mp);
		ip1dbg(("ipif_down returns %d err ", err));
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
	}
	return (ip_sioctl_flags_tail(ipif, flags, q, mp, need_up));
}

static int
ip_sioctl_flags_tail(ipif_t *ipif, uint64_t flags, queue_t *q, mblk_t *mp,
    boolean_t need_up)
{
	ill_t	*ill;
	phyint_t *phyi;
	uint64_t turn_on;
	uint64_t turn_off;
	uint64_t intf_flags;
	boolean_t phyint_flags_modified = B_FALSE;
	int	err = 0;
	boolean_t set_linklocal = B_FALSE;
	boolean_t zero_source = B_FALSE;

	ip1dbg(("ip_sioctl_flags_tail(%s:%u)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id));

	ASSERT(IAM_WRITER_IPIF(ipif));

	ill = ipif->ipif_ill;
	phyi = ill->ill_phyint;

	intf_flags = ipif->ipif_flags | ill->ill_flags | phyi->phyint_flags;
	turn_on = (flags ^ intf_flags) & ~(IFF_CANTCHANGE | IFF_UP);

	turn_off = intf_flags & turn_on;
	turn_on ^= turn_off;

	if ((turn_on|turn_off) & (PHYI_FAILED|PHYI_STANDBY|PHYI_OFFLINE))
		phyint_flags_modified = B_TRUE;

	/*
	 * Now we change the flags. Track current value of
	 * other flags in their respective places.
	 */
	mutex_enter(&ill->ill_lock);
	mutex_enter(&phyi->phyint_lock);
	ipif->ipif_flags |= (turn_on & IFF_LOGINT_FLAGS);
	ipif->ipif_flags &= (~turn_off & IFF_LOGINT_FLAGS);
	ill->ill_flags |= (turn_on & IFF_PHYINTINST_FLAGS);
	ill->ill_flags &= (~turn_off & IFF_PHYINTINST_FLAGS);
	phyi->phyint_flags |= (turn_on & IFF_PHYINT_FLAGS);
	phyi->phyint_flags &= (~turn_off & IFF_PHYINT_FLAGS);
	if (ipif->ipif_state_flags & IPIF_SET_LINKLOCAL) {
		set_linklocal = B_TRUE;
		ipif->ipif_state_flags &= ~IPIF_SET_LINKLOCAL;
	}
	if (ipif->ipif_state_flags & IPIF_ZERO_SOURCE) {
		zero_source = B_TRUE;
		ipif->ipif_state_flags &= ~IPIF_ZERO_SOURCE;
	}
	mutex_exit(&ill->ill_lock);
	mutex_exit(&phyi->phyint_lock);

	if (((turn_on | turn_off) & (PHYI_FAILED|PHYI_STANDBY|PHYI_OFFLINE)))
		ip_redo_nomination(phyi);

	if (set_linklocal)
		(void) ipif_setlinklocal(ipif);

	if (zero_source)
		ipif->ipif_v6src_addr = ipv6_all_zeros;
	else
		ipif->ipif_v6src_addr = ipif->ipif_v6lcl_addr;

	if (need_up) {
		/*
		 * XXX ipif_up really does not know whether a phyint flags
		 * was modified or not. So, it sends up information on
		 * only one routing sockets message. As we don't bring up
		 * the interface and also set STANDBY/FAILED simultaneously
		 * it should be okay.
		 */
		err = ipif_up(ipif, q, mp);
	} else {
		/*
		 * Make sure routing socket sees all changes to the flags.
		 * ipif_up_done* handles this when we use ipif_up.
		 */
		if (phyint_flags_modified) {
			if (phyi->phyint_illv4 != NULL) {
				ip_rts_ifmsg(phyi->phyint_illv4->
				    ill_ipif);
			}
			if (phyi->phyint_illv6 != NULL) {
				ip_rts_ifmsg(phyi->phyint_illv6->
				    ill_ipif);
			}
		} else {
			ip_rts_ifmsg(ipif);
		}
	}
	return (err);
}

/*
 * Restart entry point to restart the flags restart operation after the
 * refcounts have dropped to zero.
 */
/* ARGSUSED */
int
ip_sioctl_flags_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int	err;
	struct ifreq *ifr = (struct ifreq *)if_req;
	struct lifreq *lifr = (struct lifreq *)if_req;

	ip1dbg(("ip_sioctl_flags_restart(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	ipif_down_tail(ipif);
	if (ipip->ipi_cmd_type == IF_CMD) {
		/*
		 * Since ip_sioctl_flags expects an int and ifr_flags
		 * is a short we need to cast ifr_flags into an int
		 * to avoid having sign extension cause bits to get
		 * set that should not be.
		 */
		err = ip_sioctl_flags_tail(ipif,
		    (uint64_t)(ifr->ifr_flags & 0x0000ffff),
		    q, mp, B_TRUE);
	} else {
		err = ip_sioctl_flags_tail(ipif, lifr->lifr_flags,
		    q, mp, B_TRUE);
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_get_flags(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	/*
	 * Has the flags been set correctly till now ?
	 */
	ill_t *ill = ipif->ipif_ill;
	phyint_t *phyi = ill->ill_phyint;

	ip1dbg(("ip_sioctl_get_flags(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT((phyi->phyint_flags & ~(IFF_PHYINT_FLAGS)) == 0);
	ASSERT((ill->ill_flags & ~(IFF_PHYINTINST_FLAGS)) == 0);
	ASSERT((ipif->ipif_flags & ~(IFF_LOGINT_FLAGS)) == 0);

	/*
	 * Need a lock since some flags can be set even when there are
	 * references to the ipif.
	 */
	mutex_enter(&ill->ill_lock);
	if (ipip->ipi_cmd_type == IF_CMD) {
		struct ifreq *ifr = (struct ifreq *)if_req;

		/* Get interface flags (low 16 only). */
		ifr->ifr_flags = ((ipif->ipif_flags |
		    ill->ill_flags | phyi->phyint_flags) & 0xffff);
	} else {
		struct lifreq *lifr = (struct lifreq *)if_req;

		/* Get interface flags. */
		lifr->lifr_flags = ipif->ipif_flags |
		    ill->ill_flags | phyi->phyint_flags;
	}
	mutex_exit(&ill->ill_lock);
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_mtu(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int mtu;
	int ip_min_mtu;
	struct ifreq	*ifr;
	struct lifreq *lifr;
	ire_t	*ire;

	ip1dbg(("ip_sioctl_mtu(%s:%u %p)\n", ipif->ipif_ill->ill_name,
	    ipif->ipif_id, (void *)ipif));
	if (ipip->ipi_cmd_type == IF_CMD) {
		ifr = (struct ifreq *)if_req;
		mtu = ifr->ifr_metric;
	} else {
		lifr = (struct lifreq *)if_req;
		mtu = lifr->lifr_mtu;
	}

	if (ipif->ipif_isv6)
		ip_min_mtu = IPV6_MIN_MTU;
	else
		ip_min_mtu = IP_MIN_MTU;

	if (mtu > ipif->ipif_ill->ill_max_frag || mtu < ip_min_mtu)
		return (EINVAL);

	/*
	 * Change the MTU size in all relevant ire's.
	 * Mtu change Vs. new ire creation - protocol below.
	 * First change ipif_mtu and the ire_max_frag of the
	 * interface ire. Then do an ire walk and change the
	 * ire_max_frag of all affected ires. During ire_add
	 * under the bucket lock, set the ire_max_frag of the
	 * new ire being created from the ipif/ire from which
	 * it is being derived. If an mtu change happens after
	 * the ire is added, the new ire will be cleaned up.
	 * Conversely if the mtu change happens before the ire
	 * is added, ire_add will see the new value of the mtu.
	 */
	ipif->ipif_mtu = mtu;
	ipif->ipif_flags |= IPIF_FIXEDMTU;

	if (ipif->ipif_isv6)
		ire = ipif_to_ire_v6(ipif);
	else
		ire = ipif_to_ire(ipif);
	if (ire != NULL) {
		ire->ire_max_frag = ipif->ipif_mtu;
		ire_refrele(ire);
	}
	if (ipif->ipif_flags & IPIF_UP) {
		if (ipif->ipif_isv6)
			ire_walk_v6(ipif_mtu_change, (char *)ipif, ALL_ZONES);
		else
			ire_walk_v4(ipif_mtu_change, (char *)ipif, ALL_ZONES);
	}
	/* Update the MTU in SCTP's list */
	sctp_update_ipif(ipif, SCTP_IPIF_UPDATE);
	return (0);
}

/* Get interface MTU. */
/* ARGSUSED */
int
ip_sioctl_get_mtu(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
	ip_ioctl_cmd_t *ipip, void *if_req)
{
	struct ifreq	*ifr;
	struct lifreq	*lifr;

	ip1dbg(("ip_sioctl_get_mtu(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (ipip->ipi_cmd_type == IF_CMD) {
		ifr = (struct ifreq *)if_req;
		ifr->ifr_metric = ipif->ipif_mtu;
	} else {
		lifr = (struct lifreq *)if_req;
		lifr->lifr_mtu = ipif->ipif_mtu;
	}
	return (0);
}

/* Set interface broadcast address. */
/* ARGSUSED2 */
int
ip_sioctl_brdaddr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
	ip_ioctl_cmd_t *ipip, void *if_req)
{
	ipaddr_t addr;
	ire_t	*ire;

	ip1dbg(("ip_sioctl_brdaddr(%s:%u)\n", ipif->ipif_ill->ill_name,
	    ipif->ipif_id));

	ASSERT(IAM_WRITER_IPIF(ipif));
	if (!(ipif->ipif_flags & IPIF_BROADCAST))
		return (EADDRNOTAVAIL);

	ASSERT(!(ipif->ipif_isv6));	/* No IPv6 broadcast */

	if (sin->sin_family != AF_INET)
		return (EAFNOSUPPORT);

	addr = sin->sin_addr.s_addr;
	if (ipif->ipif_flags & IPIF_UP) {
		/*
		 * If we are already up, make sure the new
		 * broadcast address makes sense.  If it does,
		 * there should be an IRE for it already.
		 * Don't match on ipif, only on the ill
		 * since we are sharing these now. Don't use
		 * MATCH_IRE_ILL_GROUP as we are looking for
		 * the broadcast ire on this ill and each ill
		 * in the group has its own broadcast ire.
		 */
		ire = ire_ctable_lookup(addr, 0, IRE_BROADCAST,
		    ipif, ALL_ZONES, NULL,
		    (MATCH_IRE_ILL | MATCH_IRE_TYPE));
		if (ire == NULL) {
			return (EINVAL);
		} else {
			ire_refrele(ire);
		}
	}
	/*
	 * Changing the broadcast addr for this ipif.
	 * Make sure we have valid net and subnet bcast
	 * ire's for other logical interfaces, if needed.
	 */
	if (addr != ipif->ipif_brd_addr)
		ipif_check_bcast_ires(ipif);
	IN6_IPADDR_TO_V4MAPPED(addr, &ipif->ipif_v6brd_addr);
	return (0);
}

/* Get interface broadcast address. */
/* ARGSUSED */
int
ip_sioctl_get_brdaddr(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	ip1dbg(("ip_sioctl_get_brdaddr(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (!(ipif->ipif_flags & IPIF_BROADCAST))
		return (EADDRNOTAVAIL);

	/* IPIF_BROADCAST not possible with IPv6 */
	ASSERT(!ipif->ipif_isv6);
	*sin = sin_null;
	sin->sin_family = AF_INET;
	sin->sin_addr.s_addr = ipif->ipif_brd_addr;
	return (0);
}

/*
 * This routine is called to handle the SIOCS*IFNETMASK IOCTL.
 */
/* ARGSUSED */
int
ip_sioctl_netmask(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int err = 0;
	in6_addr_t v6mask;

	ip1dbg(("ip_sioctl_netmask(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	ASSERT(IAM_WRITER_IPIF(ipif));

	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		if (sin->sin_family != AF_INET6)
			return (EAFNOSUPPORT);

		sin6 = (sin6_t *)sin;
		v6mask = sin6->sin6_addr;
	} else {
		ipaddr_t mask;

		if (sin->sin_family != AF_INET)
			return (EAFNOSUPPORT);

		mask = sin->sin_addr.s_addr;
		V4MASK_TO_V6(mask, v6mask);
	}

	/*
	 * No big deal if the interface isn't already up, or the mask
	 * isn't really changing, or this is pt-pt.
	 */
	if (!(ipif->ipif_flags & IPIF_UP) ||
	    IN6_ARE_ADDR_EQUAL(&v6mask, &ipif->ipif_v6net_mask) ||
	    (ipif->ipif_flags & IPIF_POINTOPOINT)) {
		ipif->ipif_v6net_mask = v6mask;
		if ((ipif->ipif_flags & IPIF_POINTOPOINT) == 0) {
			V6_MASK_COPY(ipif->ipif_v6lcl_addr,
			    ipif->ipif_v6net_mask,
			    ipif->ipif_v6subnet);
		}
		return (0);
	}
	/*
	 * Make sure we have valid net and subnet broadcast ire's
	 * for the old netmask, if needed by other logical interfaces.
	 */
	if (!ipif->ipif_isv6)
		ipif_check_bcast_ires(ipif);

	err = ipif_logical_down(ipif, q, mp);
	if (err == EINPROGRESS)
		return (err);
	ipif_down_tail(ipif);
	err = ip_sioctl_netmask_tail(ipif, sin, q, mp);
	return (err);
}

static int
ip_sioctl_netmask_tail(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp)
{
	in6_addr_t v6mask;
	int err = 0;

	ip1dbg(("ip_sioctl_netmask_tail(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		sin6 = (sin6_t *)sin;
		v6mask = sin6->sin6_addr;
	} else {
		ipaddr_t mask;

		mask = sin->sin_addr.s_addr;
		V4MASK_TO_V6(mask, v6mask);
	}

	ipif->ipif_v6net_mask = v6mask;
	if ((ipif->ipif_flags & IPIF_POINTOPOINT) == 0) {
		V6_MASK_COPY(ipif->ipif_v6lcl_addr, ipif->ipif_v6net_mask,
		    ipif->ipif_v6subnet);
	}
	err = ipif_up(ipif, q, mp);

	if (err == 0 || err == EINPROGRESS) {
		/*
		 * The interface must be DL_BOUND if this packet has to
		 * go out on the wire. Since we only go through a logical
		 * down and are bound with the driver during an internal
		 * down/up that is satisfied.
		 */
		if (!ipif->ipif_isv6 && ipif->ipif_ill->ill_wq != NULL) {
			/* Potentially broadcast an address mask reply. */
			ipif_mask_reply(ipif);
		}
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_netmask_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	ip1dbg(("ip_sioctl_netmask_restart(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ipif_down_tail(ipif);
	return (ip_sioctl_netmask_tail(ipif, sin, q, mp));
}

/* Get interface net mask. */
/* ARGSUSED */
int
ip_sioctl_get_netmask(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	struct lifreq *lifr = (struct lifreq *)if_req;
	struct sockaddr_in6 *sin6 = (sin6_t *)sin;

	ip1dbg(("ip_sioctl_get_netmask(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	/*
	 * net mask can't change since we have a reference to the ipif.
	 */
	if (ipif->ipif_isv6) {
		ASSERT(ipip->ipi_cmd_type == LIF_CMD);
		*sin6 = sin6_null;
		sin6->sin6_family = AF_INET6;
		sin6->sin6_addr = ipif->ipif_v6net_mask;
		lifr->lifr_addrlen =
		    ip_mask_to_plen_v6(&ipif->ipif_v6net_mask);
	} else {
		*sin = sin_null;
		sin->sin_family = AF_INET;
		sin->sin_addr.s_addr = ipif->ipif_net_mask;
		if (ipip->ipi_cmd_type == LIF_CMD) {
			lifr->lifr_addrlen =
			    ip_mask_to_plen(ipif->ipif_net_mask);
		}
	}
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_metric(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{

	ip1dbg(("ip_sioctl_metric(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/*
	 * Set interface metric.  We don't use this for
	 * anything but we keep track of it in case it is
	 * important to routing applications or such.
	 */
	if (ipip->ipi_cmd_type == IF_CMD) {
		struct ifreq    *ifr;

		ifr = (struct ifreq *)if_req;
		ipif->ipif_metric = ifr->ifr_metric;
	} else {
		struct lifreq   *lifr;

		lifr = (struct lifreq *)if_req;
		ipif->ipif_metric = lifr->lifr_metric;
	}
	return (0);
}


/* ARGSUSED */
int
ip_sioctl_get_metric(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{

	/* Get interface metric. */
	ip1dbg(("ip_sioctl_get_metric(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (ipip->ipi_cmd_type == IF_CMD) {
		struct ifreq    *ifr;

		ifr = (struct ifreq *)if_req;
		ifr->ifr_metric = ipif->ipif_metric;
	} else {
		struct lifreq   *lifr;

		lifr = (struct lifreq *)if_req;
		lifr->lifr_metric = ipif->ipif_metric;
	}

	return (0);
}

/* ARGSUSED */
int
ip_sioctl_muxid(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{

	ip1dbg(("ip_sioctl_muxid(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/*
	 * Set the muxid returned from I_PLINK.
	 */
	if (ipip->ipi_cmd_type == IF_CMD) {
		struct ifreq *ifr = (struct ifreq *)if_req;

		ipif->ipif_ill->ill_ip_muxid = ifr->ifr_ip_muxid;
		ipif->ipif_ill->ill_arp_muxid = ifr->ifr_arp_muxid;
	} else {
		struct lifreq *lifr = (struct lifreq *)if_req;

		ipif->ipif_ill->ill_ip_muxid = lifr->lifr_ip_muxid;
		ipif->ipif_ill->ill_arp_muxid = lifr->lifr_arp_muxid;
	}
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_muxid(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{

	ip1dbg(("ip_sioctl_get_muxid(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/*
	 * Get the muxid saved in ill for I_PUNLINK.
	 */
	if (ipip->ipi_cmd_type == IF_CMD) {
		struct ifreq *ifr = (struct ifreq *)if_req;

		ifr->ifr_ip_muxid = ipif->ipif_ill->ill_ip_muxid;
		ifr->ifr_arp_muxid = ipif->ipif_ill->ill_arp_muxid;
	} else {
		struct lifreq *lifr = (struct lifreq *)if_req;

		lifr->lifr_ip_muxid = ipif->ipif_ill->ill_ip_muxid;
		lifr->lifr_arp_muxid = ipif->ipif_ill->ill_arp_muxid;
	}
	return (0);
}

/*
 * Set the subnet prefix. Does not modify the broadcast address.
 */
/* ARGSUSED */
int
ip_sioctl_subnet(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int err = 0;
	in6_addr_t v6addr;
	in6_addr_t v6mask;
	boolean_t need_up = B_FALSE;
	int addrlen;

	ip1dbg(("ip_sioctl_subnet(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	ASSERT(IAM_WRITER_IPIF(ipif));
	addrlen = ((struct lifreq *)if_req)->lifr_addrlen;

	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		if (sin->sin_family != AF_INET6)
			return (EAFNOSUPPORT);

		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;
		if (!ip_remote_addr_ok_v6(&v6addr, &ipv6_all_ones))
			return (EADDRNOTAVAIL);
	} else {
		ipaddr_t addr;

		if (sin->sin_family != AF_INET)
			return (EAFNOSUPPORT);

		addr = sin->sin_addr.s_addr;
		if (!ip_addr_ok_v4(addr, 0xFFFFFFFF))
			return (EADDRNOTAVAIL);
		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
		/* Add 96 bits */
		addrlen += IPV6_ABITS - IP_ABITS;
	}

	if (ip_plen_to_mask_v6(addrlen, &v6mask) == NULL)
		return (EINVAL);

	/* Check if bits in the address is set past the mask */
	if (!V6_MASK_EQ(v6addr, v6mask, v6addr))
		return (EINVAL);

	if (IN6_ARE_ADDR_EQUAL(&ipif->ipif_v6subnet, &v6addr) &&
	    IN6_ARE_ADDR_EQUAL(&ipif->ipif_v6net_mask, &v6mask))
		return (0);	/* No change */

	if (ipif->ipif_flags & IPIF_UP) {
		/*
		 * If the interface is already marked up,
		 * we call ipif_down which will take care
		 * of ditching any IREs that have been set
		 * up based on the old interface address.
		 */
		err = ipif_logical_down(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
		need_up = B_TRUE;
	}

	err = ip_sioctl_subnet_tail(ipif, v6addr, v6mask, q, mp, need_up);
	return (err);
}

static int
ip_sioctl_subnet_tail(ipif_t *ipif, in6_addr_t v6addr, in6_addr_t v6mask,
    queue_t *q, mblk_t *mp, boolean_t need_up)
{
	ill_t	*ill = ipif->ipif_ill;
	int	err = 0;

	ip1dbg(("ip_sioctl_subnet_tail(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	/* Set the new address. */
	mutex_enter(&ill->ill_lock);
	ipif->ipif_v6net_mask = v6mask;
	if ((ipif->ipif_flags & IPIF_POINTOPOINT) == 0) {
		V6_MASK_COPY(v6addr, ipif->ipif_v6net_mask,
		    ipif->ipif_v6subnet);
	}
	mutex_exit(&ill->ill_lock);

	if (need_up) {
		/*
		 * Now bring the interface back up.  If this
		 * is the only IPIF for the ILL, ipif_up
		 * will have to re-bind to the device, so
		 * we may get back EINPROGRESS, in which
		 * case, this IOCTL will get completed in
		 * ip_rput_dlpi when we see the DL_BIND_ACK.
		 */
		err = ipif_up(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_subnet_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int	addrlen;
	in6_addr_t v6addr;
	in6_addr_t v6mask;
	struct lifreq *lifr = (struct lifreq *)if_req;

	ip1dbg(("ip_sioctl_subnet_restart(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ipif_down_tail(ipif);

	addrlen = lifr->lifr_addrlen;
	if (ipif->ipif_isv6) {
		sin6_t *sin6;

		sin6 = (sin6_t *)sin;
		v6addr = sin6->sin6_addr;
	} else {
		ipaddr_t addr;

		addr = sin->sin_addr.s_addr;
		IN6_IPADDR_TO_V4MAPPED(addr, &v6addr);
		addrlen += IPV6_ABITS - IP_ABITS;
	}
	(void) ip_plen_to_mask_v6(addrlen, &v6mask);

	return (ip_sioctl_subnet_tail(ipif, v6addr, v6mask, q, mp, B_TRUE));
}

/* ARGSUSED */
int
ip_sioctl_get_subnet(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	struct lifreq *lifr = (struct lifreq *)if_req;
	struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sin;

	ip1dbg(("ip_sioctl_get_subnet(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(ipip->ipi_cmd_type == LIF_CMD);

	if (ipif->ipif_isv6) {
		*sin6 = sin6_null;
		sin6->sin6_family = AF_INET6;
		sin6->sin6_addr = ipif->ipif_v6subnet;
		lifr->lifr_addrlen =
		    ip_mask_to_plen_v6(&ipif->ipif_v6net_mask);
	} else {
		*sin = sin_null;
		sin->sin_family = AF_INET;
		sin->sin_addr.s_addr = ipif->ipif_subnet;
		lifr->lifr_addrlen = ip_mask_to_plen(ipif->ipif_net_mask);
	}
	return (0);
}

/*
 * Set the IPv6 address token.
 */
/* ARGSUSED */
int
ip_sioctl_token(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipi, void *if_req)
{
	ill_t *ill = ipif->ipif_ill;
	int err;
	in6_addr_t v6addr;
	in6_addr_t v6mask;
	boolean_t need_up = B_FALSE;
	int i;
	sin6_t *sin6 = (sin6_t *)sin;
	struct lifreq *lifr = (struct lifreq *)if_req;
	int addrlen;

	ip1dbg(("ip_sioctl_token(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));

	addrlen = lifr->lifr_addrlen;
	/* Only allow for logical unit zero i.e. not on "le0:17" */
	if (ipif->ipif_id != 0)
		return (EINVAL);

	if (!ipif->ipif_isv6)
		return (EINVAL);

	if (addrlen > IPV6_ABITS)
		return (EINVAL);

	v6addr = sin6->sin6_addr;

	/*
	 * The length of the token is the length from the end.  To get
	 * the proper mask for this, compute the mask of the bits not
	 * in the token; ie. the prefix, and then xor to get the mask.
	 */
	if (ip_plen_to_mask_v6(IPV6_ABITS - addrlen, &v6mask) == NULL)
		return (EINVAL);
	for (i = 0; i < 4; i++) {
		v6mask.s6_addr32[i] ^= (uint32_t)0xffffffff;
	}

	if (V6_MASK_EQ(v6addr, v6mask, ill->ill_token) &&
	    ill->ill_token_length == addrlen)
		return (0);	/* No change */

	if (ipif->ipif_flags & IPIF_UP) {
		err = ipif_logical_down(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
		need_up = B_TRUE;
	}
	err = ip_sioctl_token_tail(ipif, sin6, addrlen, q, mp, need_up);
	return (err);
}

static int
ip_sioctl_token_tail(ipif_t *ipif, sin6_t *sin6, int addrlen, queue_t *q,
    mblk_t *mp, boolean_t need_up)
{
	in6_addr_t v6addr;
	in6_addr_t v6mask;
	ill_t	*ill = ipif->ipif_ill;
	int	i;
	int	err = 0;

	ip1dbg(("ip_sioctl_token_tail(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	v6addr = sin6->sin6_addr;
	/*
	 * The length of the token is the length from the end.  To get
	 * the proper mask for this, compute the mask of the bits not
	 * in the token; ie. the prefix, and then xor to get the mask.
	 */
	(void) ip_plen_to_mask_v6(IPV6_ABITS - addrlen, &v6mask);
	for (i = 0; i < 4; i++)
		v6mask.s6_addr32[i] ^= (uint32_t)0xffffffff;

	mutex_enter(&ill->ill_lock);
	V6_MASK_COPY(v6addr, v6mask, ill->ill_token);
	ill->ill_token_length = addrlen;
	mutex_exit(&ill->ill_lock);

	if (need_up) {
		/*
		 * Now bring the interface back up.  If this
		 * is the only IPIF for the ILL, ipif_up
		 * will have to re-bind to the device, so
		 * we may get back EINPROGRESS, in which
		 * case, this IOCTL will get completed in
		 * ip_rput_dlpi when we see the DL_BIND_ACK.
		 */
		err = ipif_up(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_get_token(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipi, void *if_req)
{
	ill_t *ill;
	sin6_t *sin6 = (sin6_t *)sin;
	struct lifreq *lifr = (struct lifreq *)if_req;

	ip1dbg(("ip_sioctl_get_token(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (ipif->ipif_id != 0)
		return (EINVAL);

	ill = ipif->ipif_ill;
	if (!ill->ill_isv6)
		return (ENXIO);

	*sin6 = sin6_null;
	sin6->sin6_family = AF_INET6;
	ASSERT(!IN6_IS_ADDR_V4MAPPED(&ill->ill_token));
	sin6->sin6_addr = ill->ill_token;
	lifr->lifr_addrlen = ill->ill_token_length;
	return (0);
}

/*
 * Set (hardware) link specific information that might override
 * what was acquired through the DL_INFO_ACK.
 * The logic is as follows.
 *
 * become exclusive
 * set CHANGING flag
 * change mtu on affected IREs
 * clear CHANGING flag
 *
 * An ire add that occurs before the CHANGING flag is set will have its mtu
 * changed by the ip_sioctl_lnkinfo.
 *
 * During the time the CHANGING flag is set, no new ires will be added to the
 * bucket, and ire add will fail (due the CHANGING flag).
 *
 * An ire add that occurs after the CHANGING flag is set will have the right mtu
 * before it is added to the bucket.
 *
 * Obviously only 1 thread can set the CHANGING flag and we need to become
 * exclusive to set the flag.
 */
/* ARGSUSED */
int
ip_sioctl_lnkinfo(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipi, void *if_req)
{
	ill_t		*ill = ipif->ipif_ill;
	ipif_t		*nipif;
	int		ip_min_mtu;
	boolean_t	mtu_walk = B_FALSE;
	struct lifreq	*lifr = (struct lifreq *)if_req;
	lif_ifinfo_req_t *lir;
	ire_t		*ire;

	ip1dbg(("ip_sioctl_lnkinfo(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	lir = &lifr->lifr_ifinfo;
	ASSERT(IAM_WRITER_IPIF(ipif));

	/* Only allow for logical unit zero i.e. not on "le0:17" */
	if (ipif->ipif_id != 0)
		return (EINVAL);

	/* Set interface MTU. */
	if (ipif->ipif_isv6)
		ip_min_mtu = IPV6_MIN_MTU;
	else
		ip_min_mtu = IP_MIN_MTU;

	/*
	 * Verify values before we set anything. Allow zero to
	 * mean unspecified.
	 */
	if (lir->lir_maxmtu != 0 &&
	    (lir->lir_maxmtu > ill->ill_max_frag ||
	    lir->lir_maxmtu < ip_min_mtu))
		return (EINVAL);
	if (lir->lir_reachtime != 0 &&
	    lir->lir_reachtime > ND_MAX_REACHTIME)
		return (EINVAL);
	if (lir->lir_reachretrans != 0 &&
	    lir->lir_reachretrans > ND_MAX_REACHRETRANSTIME)
		return (EINVAL);

	mutex_enter(&ill->ill_lock);
	ill->ill_state_flags |= ILL_CHANGING;
	for (nipif = ill->ill_ipif; nipif != NULL;
	    nipif = nipif->ipif_next) {
		nipif->ipif_state_flags |= IPIF_CHANGING;
	}

	mutex_exit(&ill->ill_lock);

	if (lir->lir_maxmtu != 0) {
		ill->ill_max_mtu = lir->lir_maxmtu;
		ill->ill_mtu_userspecified = 1;
		mtu_walk = B_TRUE;
	}

	if (lir->lir_reachtime != 0)
		ill->ill_reachable_time = lir->lir_reachtime;

	if (lir->lir_reachretrans != 0)
		ill->ill_reachable_retrans_time = lir->lir_reachretrans;

	ill->ill_max_hops = lir->lir_maxhops;

	ill->ill_max_buf = ND_MAX_Q;

	if (mtu_walk) {
		/*
		 * Set the MTU on all ipifs associated with this ill except
		 * for those whose MTU was fixed via SIOCSLIFMTU.
		 */
		for (nipif = ill->ill_ipif; nipif != NULL;
		    nipif = nipif->ipif_next) {
			if (nipif->ipif_flags & IPIF_FIXEDMTU)
				continue;

			nipif->ipif_mtu = ill->ill_max_mtu;

			if (!(nipif->ipif_flags & IPIF_UP))
				continue;

			if (nipif->ipif_isv6)
				ire = ipif_to_ire_v6(nipif);
			else
				ire = ipif_to_ire(nipif);
			if (ire != NULL) {
				ire->ire_max_frag = ipif->ipif_mtu;
				ire_refrele(ire);
			}
			if (ill->ill_isv6) {
				ire_walk_ill_v6(MATCH_IRE_ILL, 0,
				    ipif_mtu_change, (char *)nipif,
				    ill);
			} else {
				ire_walk_ill_v4(MATCH_IRE_ILL, 0,
				    ipif_mtu_change, (char *)nipif,
				    ill);
			}
		}
	}

	mutex_enter(&ill->ill_lock);
	for (nipif = ill->ill_ipif; nipif != NULL;
	    nipif = nipif->ipif_next) {
		nipif->ipif_state_flags &= ~IPIF_CHANGING;
	}
	ILL_UNMARK_CHANGING(ill);
	mutex_exit(&ill->ill_lock);

	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_lnkinfo(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipi, void *if_req)
{
	struct lif_ifinfo_req *lir;
	ill_t *ill = ipif->ipif_ill;

	ip1dbg(("ip_sioctl_get_lnkinfo(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	if (ipif->ipif_id != 0)
		return (EINVAL);

	lir = &((struct lifreq *)if_req)->lifr_ifinfo;
	lir->lir_maxhops = ill->ill_max_hops;
	lir->lir_reachtime = ill->ill_reachable_time;
	lir->lir_reachretrans = ill->ill_reachable_retrans_time;
	lir->lir_maxmtu = ill->ill_max_mtu;

	return (0);
}

/*
 * Return best guess as to the subnet mask for the specified address.
 * Based on the subnet masks for all the configured interfaces.
 *
 * We end up returning a zero mask in the case of default, multicast or
 * experimental.
 */
static ipaddr_t
ip_subnet_mask(ipaddr_t addr, ipif_t **ipifp)
{
	ipaddr_t net_mask;
	ill_t	*ill;
	ipif_t	*ipif;
	ill_walk_context_t ctx;
	ipif_t	*fallback_ipif = NULL;

	net_mask = ip_net_mask(addr);
	if (net_mask == 0) {
		*ipifp = NULL;
		return (0);
	}

	/* Let's check to see if this is maybe a local subnet route. */
	/* this function only applies to IPv4 interfaces */
	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_V4(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		mutex_enter(&ill->ill_lock);
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (!IPIF_CAN_LOOKUP(ipif))
				continue;
			if (!(ipif->ipif_flags & IPIF_UP))
				continue;
			if ((ipif->ipif_subnet & net_mask) ==
			    (addr & net_mask)) {
				/*
				 * Don't trust pt-pt interfaces if there are
				 * other interfaces.
				 */
				if (ipif->ipif_flags & IPIF_POINTOPOINT) {
					if (fallback_ipif == NULL) {
						ipif_refhold_locked(ipif);
						fallback_ipif = ipif;
					}
					continue;
				}

				/*
				 * Fine. Just assume the same net mask as the
				 * directly attached subnet interface is using.
				 */
				ipif_refhold_locked(ipif);
				mutex_exit(&ill->ill_lock);
				rw_exit(&ill_g_lock);
				if (fallback_ipif != NULL)
					ipif_refrele(fallback_ipif);
				*ipifp = ipif;
				return (ipif->ipif_net_mask);
			}
		}
		mutex_exit(&ill->ill_lock);
	}
	rw_exit(&ill_g_lock);

	*ipifp = fallback_ipif;
	return ((fallback_ipif != NULL) ?
	    fallback_ipif->ipif_net_mask : net_mask);
}

/*
 * ip_sioctl_copyin_setup calls ip_wput_ioctl to process the IP_IOCTL ioctl.
 */
static void
ip_wput_ioctl(queue_t *q, mblk_t *mp)
{
	IOCP	iocp;
	ipft_t	*ipft;
	ipllc_t	*ipllc;
	mblk_t	*mp1;
	cred_t	*cr;
	int	error = 0;
	conn_t	*connp;

	ip1dbg(("ip_wput_ioctl"));
	iocp = (IOCP)mp->b_rptr;
	mp1 = mp->b_cont;
	if (mp1 == NULL) {
		iocp->ioc_error = EINVAL;
		mp->b_datap->db_type = M_IOCNAK;
		iocp->ioc_count = 0;
		qreply(q, mp);
		return;
	}

	/*
	 * These IOCTLs provide various control capabilities to
	 * upstream agents such as ULPs and processes.	There
	 * are currently two such IOCTLs implemented.  They
	 * are used by TCP to provide update information for
	 * existing IREs and to forcibly delete an IRE for a
	 * host that is not responding, thereby forcing an
	 * attempt at a new route.
	 */
	iocp->ioc_error = EINVAL;
	if (!pullupmsg(mp1, sizeof (ipllc->ipllc_cmd)))
		goto done;

	ipllc = (ipllc_t *)mp1->b_rptr;
	for (ipft = ip_ioctl_ftbl; ipft->ipft_pfi; ipft++) {
		if (ipllc->ipllc_cmd == ipft->ipft_cmd)
			break;
	}
	/*
	 * prefer credential from mblk over ioctl;
	 * see ip_sioctl_copyin_setup
	 */
	cr = DB_CREDDEF(mp, iocp->ioc_cr);

	/*
	 * Refhold the conn in case the request gets queued up in some lookup
	 */
	ASSERT(CONN_Q(q));
	connp = Q_TO_CONN(q);
	CONN_INC_REF(connp);
	if (ipft->ipft_pfi &&
	    ((mp1->b_wptr - mp1->b_rptr) >= ipft->ipft_min_size ||
		pullupmsg(mp1, ipft->ipft_min_size))) {
		error = (*ipft->ipft_pfi)(q,
		    (ipft->ipft_flags & IPFT_F_SELF_REPLY) ? mp : mp1, cr);
	}
	if (ipft->ipft_flags & IPFT_F_SELF_REPLY) {
		/*
		 * CONN_OPER_PENDING_DONE happens in the function called
		 * through ipft_pfi above.
		 */
		return;
	}

	CONN_OPER_PENDING_DONE(connp);
	if (ipft->ipft_flags & IPFT_F_NO_REPLY) {
		freemsg(mp);
		return;
	}
	iocp->ioc_error = error;

done:
	mp->b_datap->db_type = M_IOCACK;
	if (iocp->ioc_error)
		iocp->ioc_count = 0;
	qreply(q, mp);
}

/*
 * Lookup an ipif using the sequence id (ipif_seqid)
 */
ipif_t *
ipif_lookup_seqid(ill_t *ill, uint_t seqid)
{
	ipif_t *ipif;

	ASSERT(MUTEX_HELD(&ill->ill_lock));

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (ipif->ipif_seqid == seqid && IPIF_CAN_LOOKUP(ipif))
			return (ipif);
	}
	return (NULL);
}

uint64_t ipif_g_seqid;

/*
 * Assign a unique id for the ipif. This is used later when we send
 * IRES to ARP for resolution where we initialize ire_ipif_seqid
 * to the value pointed by ire_ipif->ipif_seqid. Later when the
 * IRE is added, we verify that ipif has not disappeared.
 */

static void
ipif_assign_seqid(ipif_t *ipif)
{
	ipif->ipif_seqid = atomic_add_64_nv(&ipif_g_seqid, 1);
}

/*
 * Insert the ipif, so that the list of ipifs on the ill will be sorted
 * with respect to ipif_id. Note that an ipif with an ipif_id of -1 will
 * be inserted into the first space available in the list. The value of
 * ipif_id will then be set to the appropriate value for its position.
 */
static int
ipif_insert(ipif_t *ipif, boolean_t acquire_g_lock, boolean_t acquire_ill_lock)
{
	ill_t *ill;
	ipif_t *tipif;
	ipif_t **tipifp;
	int id;

	ASSERT(ipif->ipif_ill->ill_net_type == IRE_LOOPBACK ||
	    IAM_WRITER_IPIF(ipif));

	ill = ipif->ipif_ill;
	ASSERT(ill != NULL);

	/*
	 * In the case of lo0:0 we already hold the ill_g_lock.
	 * ill_lookup_on_name (acquires ill_g_lock) -> ipif_allocate ->
	 * ipif_insert. Another such caller is ipif_move.
	 */
	if (acquire_g_lock)
		rw_enter(&ill_g_lock, RW_WRITER);
	if (acquire_ill_lock)
		mutex_enter(&ill->ill_lock);
	id = ipif->ipif_id;
	tipifp = &(ill->ill_ipif);
	if (id == -1) {	/* need to find a real id */
		id = 0;
		while ((tipif = *tipifp) != NULL) {
			ASSERT(tipif->ipif_id >= id);
			if (tipif->ipif_id != id)
				break; /* non-consecutive id */
			id++;
			tipifp = &(tipif->ipif_next);
		}
		/* limit number of logical interfaces */
		if (id >= ip_addrs_per_if) {
			if (acquire_ill_lock)
				mutex_exit(&ill->ill_lock);
			if (acquire_g_lock)
				rw_exit(&ill_g_lock);
			return (-1);
		}
		ipif->ipif_id = id; /* assign new id */
	} else if (id < ip_addrs_per_if) {
		/* we have a real id; insert ipif in the right place */
		while ((tipif = *tipifp) != NULL) {
			ASSERT(tipif->ipif_id != id);
			if (tipif->ipif_id > id)
				break; /* found correct location */
			tipifp = &(tipif->ipif_next);
		}
	} else {
		if (acquire_ill_lock)
			mutex_exit(&ill->ill_lock);
		if (acquire_g_lock)
			rw_exit(&ill_g_lock);
		return (-1);
	}

	ASSERT(tipifp != &(ill->ill_ipif) || id == 0);

	ipif->ipif_next = tipif;
	*tipifp = ipif;
	if (acquire_ill_lock)
		mutex_exit(&ill->ill_lock);
	if (acquire_g_lock)
		rw_exit(&ill_g_lock);
	return (0);
}

/*
 * Allocate and initialize a new interface control structure.  (Always
 * called as writer.)
 * When ipif_allocate() is called from ip_ll_subnet_defaults, the ill
 * is not part of the global linked list of ills. ipif_seqid is unique
 * in the system and to preserve the uniqueness, it is assigned only
 * when ill becomes part of the global list. At that point ill will
 * have a name. If it doesn't get assigned here, it will get assigned
 * in ipif_set_values() as part of SIOCSLIFNAME processing.
 * Aditionally, if we come here from ip_ll_subnet_defaults, we don't set
 * the interface flags or any other information from the DL_INFO_ACK for
 * DL_STYLE2 drivers (initialize == B_FALSE), since we won't have them at
 * this point. The flags etc. will be set in ip_ll_subnet_defaults when the
 * second DL_INFO_ACK comes in from the driver.
 */
static ipif_t *
ipif_allocate(ill_t *ill, int id, uint_t ire_type, boolean_t initialize)
{
	ipif_t	*ipif;
	phyint_t *phyi;

	ip1dbg(("ipif_allocate(%s:%d ill %p)\n",
	    ill->ill_name, id, (void *)ill));
	ASSERT(ire_type == IRE_LOOPBACK || IAM_WRITER_ILL(ill));

	if ((ipif = (ipif_t *)mi_alloc(sizeof (ipif_t), BPRI_MED)) == NULL)
		return (NULL);
	*ipif = ipif_zero;	/* start clean */

	ipif->ipif_ill = ill;
	ipif->ipif_id = id;	/* could be -1 */
	ipif->ipif_zoneid = GLOBAL_ZONEID;

	mutex_init(&ipif->ipif_saved_ire_lock, NULL, MUTEX_DEFAULT, NULL);

	ipif->ipif_refcnt = 0;
	ipif->ipif_saved_ire_cnt = 0;

	if (ipif_insert(ipif, ire_type != IRE_LOOPBACK, B_TRUE)) {
		mi_free(ipif);
		return (NULL);
	}
	/* -1 id should have been replaced by real id */
	id = ipif->ipif_id;
	ASSERT(id >= 0);

	if (ill->ill_name[0] != '\0') {
		ipif_assign_seqid(ipif);
		if (ill->ill_phyint->phyint_ifindex != 0)
			sctp_update_ipif(ipif, SCTP_IPIF_INSERT);
	}
	/*
	 * Keep a copy of original id in ipif_orig_ipifid.  Failback
	 * will attempt to restore the original id.  The SIOCSLIFOINDEX
	 * ioctl sets ipif_orig_ipifid to zero.
	 */
	ipif->ipif_orig_ipifid = id;

	/*
	 * We grab the ill_lock and phyint_lock to protect the flag changes.
	 * The ipif is still not up and can't be looked up until the
	 * ioctl completes and the IPIF_CHANGING flag is cleared.
	 */
	mutex_enter(&ill->ill_lock);
	mutex_enter(&ill->ill_phyint->phyint_lock);
	/*
	 * Set the running flag when logical interface zero is created.
	 * For subsequent logical interfaces, a DLPI link down
	 * notification message may have cleared the running flag to
	 * indicate the link is down, so we shouldn't just blindly set it.
	 */
	if (id == 0)
		ill->ill_phyint->phyint_flags |= PHYI_RUNNING;
	ipif->ipif_ire_type = ire_type;
	phyi = ill->ill_phyint;
	ipif->ipif_orig_ifindex = phyi->phyint_ifindex;

	if (ipif->ipif_isv6) {
		ill->ill_flags |= ILLF_IPV6;
	} else {
		ipaddr_t inaddr_any = INADDR_ANY;

		ill->ill_flags |= ILLF_IPV4;

		/* Keep the IN6_IS_ADDR_V4MAPPED assertions happy */
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6lcl_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6src_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6subnet);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6net_mask);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6brd_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &ipif->ipif_v6pp_dst_addr);
	}

	/*
	 * Don't set the interface flags etc. now, will do it in
	 * ip_ll_subnet_defaults.
	 */
	if (!initialize) {
		mutex_exit(&ill->ill_lock);
		mutex_exit(&ill->ill_phyint->phyint_lock);
		return (ipif);
	}
	ipif->ipif_mtu = ill->ill_max_mtu;

	if (ill->ill_bcast_addr_length != 0) {
		/*
		 * Later detect lack of DLPI driver multicast
		 * capability by catching DL_ENABMULTI errors in
		 * ip_rput_dlpi.
		 */
		ill->ill_flags |= ILLF_MULTICAST;
		if (!ipif->ipif_isv6)
			ipif->ipif_flags |= IPIF_BROADCAST;
	} else {
		if (ill->ill_net_type != IRE_LOOPBACK) {
			if (ipif->ipif_isv6)
				/*
				 * Note: xresolv interfaces will eventually need
				 * NOARP set here as well, but that will require
				 * those external resolvers to have some
				 * knowledge of that flag and act appropriately.
				 * Not to be changed at present.
				 */
				ill->ill_flags |= ILLF_NONUD;
			else
				ill->ill_flags |= ILLF_NOARP;
		}
		if (ill->ill_phys_addr_length == 0) {
			if (ill->ill_media &&
			    ill->ill_media->ip_m_mac_type == SUNW_DL_VNI) {
				ipif->ipif_flags |= IPIF_NOXMIT;
				phyi->phyint_flags |= PHYI_VIRTUAL;
			} else {
				/* pt-pt supports multicast. */
				ill->ill_flags |= ILLF_MULTICAST;
				if (ill->ill_net_type == IRE_LOOPBACK) {
					phyi->phyint_flags |=
					    (PHYI_LOOPBACK | PHYI_VIRTUAL);
				} else {
					ipif->ipif_flags |= IPIF_POINTOPOINT;
				}
			}
		}
	}
	mutex_exit(&ill->ill_lock);
	mutex_exit(&ill->ill_phyint->phyint_lock);
	return (ipif);
}

/*
 * If appropriate, send a message up to the resolver delete the entry
 * for the address of this interface which is going out of business.
 * (Always called as writer).
 *
 * NOTE : We need to check for NULL mps as some of the fields are
 *	  initialized only for some interface types. See ipif_resolver_up()
 *	  for details.
 */
void
ipif_arp_down(ipif_t *ipif)
{
	mblk_t	*mp;
	ill_t	*ill = ipif->ipif_ill;

	ip1dbg(("ipif_arp_down(%s:%u)\n", ill->ill_name, ipif->ipif_id));
	ASSERT(IAM_WRITER_IPIF(ipif));

	/* Delete the mapping for the local address */
	mp = ipif->ipif_arp_del_mp;
	if (mp != NULL) {
		ip1dbg(("ipif_arp_down: arp cmd %x for %s:%u\n",
		    *(unsigned *)mp->b_rptr, ill->ill_name, ipif->ipif_id));
		putnext(ill->ill_rq, mp);
		ipif->ipif_arp_del_mp = NULL;
	}

	/*
	 * If this is the last ipif that is going down and there are no
	 * duplicate addresses we may yet attempt to re-probe, then we need to
	 * clean up ARP completely.
	 */
	if (ill->ill_ipif_up_count == 0 && ill->ill_ipif_dup_count == 0) {

		/* Send up AR_INTERFACE_DOWN message */
		mp = ill->ill_arp_down_mp;
		if (mp != NULL) {
			ip1dbg(("ipif_arp_down: arp cmd %x for %s:%u\n",
			    *(unsigned *)mp->b_rptr, ill->ill_name,
			    ipif->ipif_id));
			putnext(ill->ill_rq, mp);
			ill->ill_arp_down_mp = NULL;
		}

		/* Tell ARP to delete the multicast mappings */
		mp = ill->ill_arp_del_mapping_mp;
		if (mp != NULL) {
			ip1dbg(("ipif_arp_down: arp cmd %x for %s:%u\n",
			    *(unsigned *)mp->b_rptr, ill->ill_name,
			    ipif->ipif_id));
			putnext(ill->ill_rq, mp);
			ill->ill_arp_del_mapping_mp = NULL;
		}
	}
}

/*
 * This function sets up the multicast mappings in ARP. When ipif_resolver_up
 * calls this function, it passes a non-NULL arp_add_mapping_mp indicating
 * that it wants the add_mp allocated in this function to be returned
 * wihtout sending it to arp. When ip_rput_dlpi_writer calls this to
 * just re-do the multicast, it wants us to send the add_mp to ARP also.
 * ipif_resolver_up does not want us to do the "add" i.e sending to ARP,
 * as it does a ipif_arp_down after calling this function - which will
 * remove what we add here.
 *
 * Returns -1 on failures and 0 on success.
 */
int
ipif_arp_setup_multicast(ipif_t *ipif, mblk_t **arp_add_mapping_mp)
{
	mblk_t	*del_mp = NULL;
	mblk_t *add_mp = NULL;
	mblk_t *mp;
	ill_t	*ill = ipif->ipif_ill;
	phyint_t *phyi = ill->ill_phyint;
	ipaddr_t addr, mask, extract_mask = 0;
	arma_t	*arma;
	uint8_t *maddr, *bphys_addr;
	uint32_t hw_start;
	dl_unitdata_req_t *dlur;

	ASSERT(IAM_WRITER_IPIF(ipif));
	if (ipif->ipif_flags & IPIF_POINTOPOINT)
		return (0);

	/*
	 * Delete the existing mapping from ARP. Normally ipif_down
	 * -> ipif_arp_down should send this up to ARP. The only
	 * reason we would find this when we are switching from
	 * Multicast to Broadcast where we did not do a down.
	 */
	mp = ill->ill_arp_del_mapping_mp;
	if (mp != NULL) {
		ip1dbg(("ipif_arp_down: arp cmd %x for %s:%u\n",
		    *(unsigned *)mp->b_rptr, ill->ill_name, ipif->ipif_id));
		putnext(ill->ill_rq, mp);
		ill->ill_arp_del_mapping_mp = NULL;
	}

	if (arp_add_mapping_mp != NULL)
		*arp_add_mapping_mp = NULL;

	/*
	 * Check that the address is not to long for the constant
	 * length reserved in the template arma_t.
	 */
	if (ill->ill_phys_addr_length > IP_MAX_HW_LEN)
		return (-1);

	/* Add mapping mblk */
	addr = (ipaddr_t)htonl(INADDR_UNSPEC_GROUP);
	mask = (ipaddr_t)htonl(IN_CLASSD_NET);
	add_mp = ill_arp_alloc(ill, (uchar_t *)&ip_arma_multi_template,
	    (caddr_t)&addr);
	if (add_mp == NULL)
		return (-1);
	arma = (arma_t *)add_mp->b_rptr;
	maddr = (uint8_t *)arma + arma->arma_hw_addr_offset;
	bcopy(&mask, (char *)arma + arma->arma_proto_mask_offset, IP_ADDR_LEN);
	arma->arma_hw_addr_length = ill->ill_phys_addr_length;

	/*
	 * Determine the broadcast address.
	 */
	dlur = (dl_unitdata_req_t *)ill->ill_bcast_mp->b_rptr;
	if (ill->ill_sap_length < 0)
		bphys_addr = (uchar_t *)dlur + dlur->dl_dest_addr_offset;
	else
		bphys_addr = (uchar_t *)dlur +
		    dlur->dl_dest_addr_offset + ill->ill_sap_length;
	/*
	 * Check PHYI_MULTI_BCAST and length of physical
	 * address to determine if we use the mapping or the
	 * broadcast address.
	 */
	if (!(phyi->phyint_flags & PHYI_MULTI_BCAST))
		if (!MEDIA_V4MINFO(ill->ill_media, ill->ill_phys_addr_length,
		    bphys_addr, maddr, &hw_start, &extract_mask))
			phyi->phyint_flags |= PHYI_MULTI_BCAST;

	if ((phyi->phyint_flags & PHYI_MULTI_BCAST) ||
	    (ill->ill_flags & ILLF_MULTICAST)) {
		/* Make sure this will not match the "exact" entry. */
		addr = (ipaddr_t)htonl(INADDR_ALLHOSTS_GROUP);
		del_mp = ill_arp_alloc(ill, (uchar_t *)&ip_ared_template,
		    (caddr_t)&addr);
		if (del_mp == NULL) {
			freemsg(add_mp);
			return (-1);
		}
		bcopy(&extract_mask, (char *)arma +
		    arma->arma_proto_extract_mask_offset, IP_ADDR_LEN);
		if (phyi->phyint_flags & PHYI_MULTI_BCAST) {
			/* Use link-layer broadcast address for MULTI_BCAST */
			bcopy(bphys_addr, maddr, ill->ill_phys_addr_length);
			ip2dbg(("ipif_arp_setup_multicast: adding"
			    " MULTI_BCAST ARP setup for %s\n", ill->ill_name));
		} else {
			arma->arma_hw_mapping_start = hw_start;
			ip2dbg(("ipif_arp_setup_multicast: adding multicast"
			    " ARP setup for %s\n", ill->ill_name));
		}
	} else {
		freemsg(add_mp);
		ASSERT(del_mp == NULL);
		/* It is neither MULTICAST nor MULTI_BCAST */
		return (0);
	}
	ASSERT(add_mp != NULL && del_mp != NULL);
	ASSERT(ill->ill_arp_del_mapping_mp == NULL);
	ill->ill_arp_del_mapping_mp = del_mp;
	if (arp_add_mapping_mp != NULL) {
		/* The caller just wants the mblks allocated */
		*arp_add_mapping_mp = add_mp;
	} else {
		/* The caller wants us to send it to arp */
		putnext(ill->ill_rq, add_mp);
	}
	return (0);
}

/*
 * Get the resolver set up for a new interface address.
 * (Always called as writer.)
 * Called both for IPv4 and IPv6 interfaces,
 * though it only sets up the resolver for v6
 * if it's an xresolv interface (one using an external resolver).
 * Honors ILLF_NOARP.
 * The enumerated value res_act is used to tune the behavior.
 * If set to Res_act_initial, then we set up all the resolver
 * structures for a new interface.  If set to Res_act_move, then
 * we just send an AR_ENTRY_ADD message up to ARP for IPv4
 * interfaces; this is called by ip_rput_dlpi_writer() to handle
 * asynchronous hardware address change notification.  If set to
 * Res_act_defend, then we tell ARP that it needs to send a single
 * gratuitous message in defense of the address.
 * Returns error on failure.
 */
int
ipif_resolver_up(ipif_t *ipif, enum ip_resolver_action res_act)
{
	caddr_t	addr;
	mblk_t	*arp_up_mp = NULL;
	mblk_t	*arp_down_mp = NULL;
	mblk_t	*arp_add_mp = NULL;
	mblk_t	*arp_del_mp = NULL;
	mblk_t	*arp_add_mapping_mp = NULL;
	mblk_t	*arp_del_mapping_mp = NULL;
	ill_t	*ill = ipif->ipif_ill;
	uchar_t	*area_p = NULL;
	uchar_t	*ared_p = NULL;
	int	err = ENOMEM;
	boolean_t was_dup;

	ip1dbg(("ipif_resolver_up(%s:%u) flags 0x%x\n",
	    ill->ill_name, ipif->ipif_id, (uint_t)ipif->ipif_flags));
	ASSERT(IAM_WRITER_IPIF(ipif));

	was_dup = B_FALSE;
	if (res_act == Res_act_initial) {
		ipif->ipif_addr_ready = 0;
		/*
		 * We're bringing an interface up here.  There's no way that we
		 * should need to shut down ARP now.
		 */
		mutex_enter(&ill->ill_lock);
		if (ipif->ipif_flags & IPIF_DUPLICATE) {
			ipif->ipif_flags &= ~IPIF_DUPLICATE;
			ill->ill_ipif_dup_count--;
			was_dup = B_TRUE;
		}
		mutex_exit(&ill->ill_lock);
	}
	if (ipif->ipif_recovery_id != 0)
		(void) untimeout(ipif->ipif_recovery_id);
	ipif->ipif_recovery_id = 0;
	if (ill->ill_net_type != IRE_IF_RESOLVER) {
		ipif->ipif_addr_ready = 1;
		return (0);
	}
	/* NDP will set the ipif_addr_ready flag when it's ready */
	if (ill->ill_isv6 && !(ill->ill_flags & ILLF_XRESOLV))
		return (0);

	if (ill->ill_isv6) {
		/*
		 * External resolver for IPv6
		 */
		ASSERT(res_act == Res_act_initial);
		if (!IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr)) {
			addr = (caddr_t)&ipif->ipif_v6lcl_addr;
			area_p = (uchar_t *)&ip6_area_template;
			ared_p = (uchar_t *)&ip6_ared_template;
		}
	} else {
		/*
		 * IPv4 arp case. If the ARP stream has already started
		 * closing, fail this request for ARP bringup. Else
		 * record the fact that an ARP bringup is pending.
		 */
		mutex_enter(&ill->ill_lock);
		if (ill->ill_arp_closing) {
			mutex_exit(&ill->ill_lock);
			err = EINVAL;
			goto failed;
		} else {
			if (ill->ill_ipif_up_count == 0 &&
			    ill->ill_ipif_dup_count == 0 && !was_dup)
				ill->ill_arp_bringup_pending = 1;
			mutex_exit(&ill->ill_lock);
		}
		if (ipif->ipif_lcl_addr != INADDR_ANY) {
			addr = (caddr_t)&ipif->ipif_lcl_addr;
			area_p = (uchar_t *)&ip_area_template;
			ared_p = (uchar_t *)&ip_ared_template;
		}
	}

	/*
	 * Add an entry for the local address in ARP only if it
	 * is not UNNUMBERED and the address is not INADDR_ANY.
	 */
	if (!(ipif->ipif_flags & IPIF_UNNUMBERED) && area_p != NULL) {
		area_t *area;

		/* Now ask ARP to publish our address. */
		arp_add_mp = ill_arp_alloc(ill, area_p, addr);
		if (arp_add_mp == NULL)
			goto failed;
		area = (area_t *)arp_add_mp->b_rptr;
		if (res_act != Res_act_initial) {
			/*
			 * Copy the new hardware address and length into
			 * arp_add_mp to be sent to ARP.
			 */
			area->area_hw_addr_length =
			    ill->ill_phys_addr_length;
			bcopy((char *)ill->ill_phys_addr,
			    ((char *)area + area->area_hw_addr_offset),
			    area->area_hw_addr_length);
		}

		area->area_flags = ACE_F_PERMANENT | ACE_F_PUBLISH |
		    ACE_F_MYADDR;

		if (res_act == Res_act_defend) {
			area->area_flags |= ACE_F_DEFEND;
			/*
			 * If we're just defending our address now, then
			 * there's no need to set up ARP multicast mappings.
			 * The publish command is enough.
			 */
			goto done;
		}

		if (res_act != Res_act_initial)
			goto arp_setup_multicast;

		/*
		 * Allocate an ARP deletion message so we know we can tell ARP
		 * when the interface goes down.
		 */
		arp_del_mp = ill_arp_alloc(ill, ared_p, addr);
		if (arp_del_mp == NULL)
			goto failed;

	} else {
		if (res_act != Res_act_initial)
			goto done;
	}
	/*
	 * Need to bring up ARP or setup multicast mapping only
	 * when the first interface is coming UP.
	 */
	if (ill->ill_ipif_up_count != 0 || ill->ill_ipif_dup_count != 0 ||
	    was_dup) {
		goto done;
	}

	/*
	 * Allocate an ARP down message (to be saved) and an ARP up
	 * message.
	 */
	arp_down_mp = ill_arp_alloc(ill, (uchar_t *)&ip_ard_template, 0);
	if (arp_down_mp == NULL)
		goto failed;

	arp_up_mp = ill_arp_alloc(ill, (uchar_t *)&ip_aru_template, 0);
	if (arp_up_mp == NULL)
		goto failed;

	if (ipif->ipif_flags & IPIF_POINTOPOINT)
		goto done;

arp_setup_multicast:
	/*
	 * Setup the multicast mappings. This function initializes
	 * ill_arp_del_mapping_mp also. This does not need to be done for
	 * IPv6.
	 */
	if (!ill->ill_isv6) {
		err = ipif_arp_setup_multicast(ipif, &arp_add_mapping_mp);
		if (err != 0)
			goto failed;
		ASSERT(ill->ill_arp_del_mapping_mp != NULL);
		ASSERT(arp_add_mapping_mp != NULL);
	}

done:
	if (arp_del_mp != NULL) {
		ASSERT(ipif->ipif_arp_del_mp == NULL);
		ipif->ipif_arp_del_mp = arp_del_mp;
	}
	if (arp_down_mp != NULL) {
		ASSERT(ill->ill_arp_down_mp == NULL);
		ill->ill_arp_down_mp = arp_down_mp;
	}
	if (arp_del_mapping_mp != NULL) {
		ASSERT(ill->ill_arp_del_mapping_mp == NULL);
		ill->ill_arp_del_mapping_mp = arp_del_mapping_mp;
	}
	if (arp_up_mp != NULL) {
		ip1dbg(("ipif_resolver_up: ARP_UP for %s:%u\n",
		    ill->ill_name, ipif->ipif_id));
		putnext(ill->ill_rq, arp_up_mp);
	}
	if (arp_add_mp != NULL) {
		ip1dbg(("ipif_resolver_up: ARP_ADD for %s:%u\n",
		    ill->ill_name, ipif->ipif_id));
		/*
		 * If it's an extended ARP implementation, then we'll wait to
		 * hear that DAD has finished before using the interface.
		 */
		if (!ill->ill_arp_extend)
			ipif->ipif_addr_ready = 1;
		putnext(ill->ill_rq, arp_add_mp);
	} else {
		ipif->ipif_addr_ready = 1;
	}
	if (arp_add_mapping_mp != NULL) {
		ip1dbg(("ipif_resolver_up: MAPPING_ADD for %s:%u\n",
		    ill->ill_name, ipif->ipif_id));
		putnext(ill->ill_rq, arp_add_mapping_mp);
	}
	if (res_act != Res_act_initial)
		return (0);

	if (ill->ill_flags & ILLF_NOARP)
		err = ill_arp_off(ill);
	else
		err = ill_arp_on(ill);
	if (err != 0) {
		ip0dbg(("ipif_resolver_up: arp_on/off failed %d\n", err));
		freemsg(ipif->ipif_arp_del_mp);
		freemsg(ill->ill_arp_down_mp);
		freemsg(ill->ill_arp_del_mapping_mp);
		ipif->ipif_arp_del_mp = NULL;
		ill->ill_arp_down_mp = NULL;
		ill->ill_arp_del_mapping_mp = NULL;
		return (err);
	}
	return ((ill->ill_ipif_up_count != 0 || was_dup ||
	    ill->ill_ipif_dup_count != 0) ? 0 : EINPROGRESS);

failed:
	ip1dbg(("ipif_resolver_up: FAILED\n"));
	freemsg(arp_add_mp);
	freemsg(arp_del_mp);
	freemsg(arp_add_mapping_mp);
	freemsg(arp_up_mp);
	freemsg(arp_down_mp);
	ill->ill_arp_bringup_pending = 0;
	return (err);
}

/*
 * This routine restarts IPv4 duplicate address detection (DAD) when a link has
 * just gone back up.
 */
static void
ipif_arp_start_dad(ipif_t *ipif)
{
	ill_t *ill = ipif->ipif_ill;
	mblk_t *arp_add_mp;
	area_t *area;

	if (ill->ill_net_type != IRE_IF_RESOLVER || ill->ill_arp_closing ||
	    (ipif->ipif_flags & IPIF_UNNUMBERED) ||
	    ipif->ipif_lcl_addr == INADDR_ANY ||
	    (arp_add_mp = ill_arp_alloc(ill, (uchar_t *)&ip_area_template,
	    (char *)&ipif->ipif_lcl_addr)) == NULL) {
		/*
		 * If we can't contact ARP for some reason, that's not really a
		 * problem.  Just send out the routing socket notification that
		 * DAD completion would have done, and continue.
		 */
		ipif_mask_reply(ipif);
		ip_rts_ifmsg(ipif);
		ip_rts_newaddrmsg(RTM_ADD, 0, ipif);
		sctp_update_ipif(ipif, SCTP_IPIF_UP);
		ipif->ipif_addr_ready = 1;
		return;
	}

	/* Setting the 'unverified' flag restarts DAD */
	area = (area_t *)arp_add_mp->b_rptr;
	area->area_flags = ACE_F_PERMANENT | ACE_F_PUBLISH | ACE_F_MYADDR |
	    ACE_F_UNVERIFIED;
	putnext(ill->ill_rq, arp_add_mp);
}

static void
ipif_ndp_start_dad(ipif_t *ipif)
{
	nce_t *nce;

	nce = ndp_lookup_v6(ipif->ipif_ill, &ipif->ipif_v6lcl_addr, B_FALSE);
	if (nce == NULL)
		return;

	if (!ndp_restart_dad(nce)) {
		/*
		 * If we can't restart DAD for some reason, that's not really a
		 * problem.  Just send out the routing socket notification that
		 * DAD completion would have done, and continue.
		 */
		ip_rts_ifmsg(ipif);
		ip_rts_newaddrmsg(RTM_ADD, 0, ipif);
		sctp_update_ipif(ipif, SCTP_IPIF_UP);
		ipif->ipif_addr_ready = 1;
	}
	NCE_REFRELE(nce);
}

/*
 * Restart duplicate address detection on all interfaces on the given ill.
 *
 * This is called when an interface transitions from down to up
 * (DL_NOTE_LINK_UP) or up to down (DL_NOTE_LINK_DOWN).
 *
 * Note that since the underlying physical link has transitioned, we must cause
 * at least one routing socket message to be sent here, either via DAD
 * completion or just by default on the first ipif.  (If we don't do this, then
 * in.mpathd will see long delays when doing link-based failure recovery.)
 */
void
ill_restart_dad(ill_t *ill, boolean_t went_up)
{
	ipif_t *ipif;

	if (ill == NULL)
		return;

	/*
	 * If layer two doesn't support duplicate address detection, then just
	 * send the routing socket message now and be done with it.
	 */
	if ((ill->ill_isv6 && (ill->ill_flags & ILLF_XRESOLV)) ||
	    (!ill->ill_isv6 && !ill->ill_arp_extend)) {
		ip_rts_ifmsg(ill->ill_ipif);
		return;
	}

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (went_up) {
			if (ipif->ipif_flags & IPIF_UP) {
				if (ill->ill_isv6)
					ipif_ndp_start_dad(ipif);
				else
					ipif_arp_start_dad(ipif);
			} else if (ill->ill_isv6 &&
			    (ipif->ipif_flags & IPIF_DUPLICATE)) {
				/*
				 * For IPv4, the ARP module itself will
				 * automatically start the DAD process when it
				 * sees DL_NOTE_LINK_UP.  We respond to the
				 * AR_CN_READY at the completion of that task.
				 * For IPv6, we must kick off the bring-up
				 * process now.
				 */
				ndp_do_recovery(ipif);
			} else {
				/*
				 * Unfortunately, the first ipif is "special"
				 * and represents the underlying ill in the
				 * routing socket messages.  Thus, when this
				 * one ipif is down, we must still notify so
				 * that the user knows the IFF_RUNNING status
				 * change.  (If the first ipif is up, then
				 * we'll handle eventual routing socket
				 * notification via DAD completion.)
				 */
				if (ipif == ill->ill_ipif)
					ip_rts_ifmsg(ill->ill_ipif);
			}
		} else {
			/*
			 * After link down, we'll need to send a new routing
			 * message when the link comes back, so clear
			 * ipif_addr_ready.
			 */
			ipif->ipif_addr_ready = 0;
		}
	}

	/*
	 * If we've torn down links, then notify the user right away.
	 */
	if (!went_up)
		ip_rts_ifmsg(ill->ill_ipif);
}

/*
 * Wakeup all threads waiting to enter the ipsq, and sleeping
 * on any of the ills in this ipsq. The ill_lock of the ill
 * must be held so that waiters don't miss wakeups
 */
static void
ill_signal_ipsq_ills(ipsq_t *ipsq, boolean_t caller_holds_lock)
{
	phyint_t *phyint;

	phyint = ipsq->ipsq_phyint_list;
	while (phyint != NULL) {
		if (phyint->phyint_illv4) {
			if (!caller_holds_lock)
				mutex_enter(&phyint->phyint_illv4->ill_lock);
			ASSERT(MUTEX_HELD(&phyint->phyint_illv4->ill_lock));
			cv_broadcast(&phyint->phyint_illv4->ill_cv);
			if (!caller_holds_lock)
				mutex_exit(&phyint->phyint_illv4->ill_lock);
		}
		if (phyint->phyint_illv6) {
			if (!caller_holds_lock)
				mutex_enter(&phyint->phyint_illv6->ill_lock);
			ASSERT(MUTEX_HELD(&phyint->phyint_illv6->ill_lock));
			cv_broadcast(&phyint->phyint_illv6->ill_cv);
			if (!caller_holds_lock)
				mutex_exit(&phyint->phyint_illv6->ill_lock);
		}
		phyint = phyint->phyint_ipsq_next;
	}
}

static ipsq_t *
ipsq_create(char *groupname)
{
	ipsq_t	*ipsq;

	ASSERT(RW_WRITE_HELD(&ill_g_lock));
	ipsq = kmem_zalloc(sizeof (ipsq_t), KM_NOSLEEP);
	if (ipsq == NULL) {
		return (NULL);
	}

	if (groupname != NULL)
		(void) strcpy(ipsq->ipsq_name, groupname);
	else
		ipsq->ipsq_name[0] = '\0';

	mutex_init(&ipsq->ipsq_lock, NULL, MUTEX_DEFAULT, NULL);
	ipsq->ipsq_flags |= IPSQ_GROUP;
	ipsq->ipsq_next = ipsq_g_head;
	ipsq_g_head = ipsq;
	return (ipsq);
}

/*
 * Return an ipsq correspoding to the groupname. If 'create' is true
 * allocate a new ipsq if one does not exist. Usually an ipsq is associated
 * uniquely with an IPMP group. However during IPMP groupname operations,
 * multiple IPMP groups may be associated with a single ipsq. But no
 * IPMP group can be associated with more than 1 ipsq at any time.
 * For example
 *	Interfaces		IPMP grpname	ipsq	ipsq_name      ipsq_refs
 * 	hme1, hme2		mpk17-84	ipsq1	mpk17-84	2
 *	hme3, hme4		mpk17-85	ipsq2	mpk17-85	2
 *
 * Now the command ifconfig hme3 group mpk17-84 results in the temporary
 * status shown below during the execution of the above command.
 * 	hme1, hme2, hme3, hme4	mpk17-84, mpk17-85	ipsq1	mpk17-84  4
 *
 * After the completion of the above groupname command we return to the stable
 * state shown below.
 * 	hme1, hme2, hme3	mpk17-84	ipsq1	mpk17-84	3
 *	hme4			mpk17-85	ipsq2	mpk17-85	1
 *
 * Because of the above, we don't search based on the ipsq_name since that
 * would miss the correct ipsq during certain windows as shown above.
 * The ipsq_name is only used during split of an ipsq to return the ipsq to its
 * natural state.
 */
static ipsq_t *
ip_ipsq_lookup(char *groupname, boolean_t create, ipsq_t *exclude_ipsq)
{
	ipsq_t	*ipsq;
	int	group_len;
	phyint_t *phyint;

	ASSERT(RW_LOCK_HELD(&ill_g_lock));

	group_len = strlen(groupname);
	ASSERT(group_len != 0);
	group_len++;

	for (ipsq = ipsq_g_head; ipsq != NULL; ipsq = ipsq->ipsq_next) {
		/*
		 * When an ipsq is being split, and ill_split_ipsq
		 * calls this function, we exclude it from being considered.
		 */
		if (ipsq == exclude_ipsq)
			continue;

		/*
		 * Compare against the ipsq_name. The groupname change happens
		 * in 2 phases. The 1st phase merges the from group into
		 * the to group's ipsq, by calling ill_merge_groups and restarts
		 * the ioctl. The 2nd phase then locates the ipsq again thru
		 * ipsq_name. At this point the phyint_groupname has not been
		 * updated.
		 */
		if ((group_len == strlen(ipsq->ipsq_name) + 1) &&
		    (bcmp(ipsq->ipsq_name, groupname, group_len) == 0)) {
			/*
			 * Verify that an ipmp groupname is exactly
			 * part of 1 ipsq and is not found in any other
			 * ipsq.
			 */
			ASSERT(ip_ipsq_lookup(groupname, B_FALSE, ipsq) ==
			    NULL);
			return (ipsq);
		}

		/*
		 * Comparison against ipsq_name alone is not sufficient.
		 * In the case when groups are currently being
		 * merged, the ipsq could hold other IPMP groups temporarily.
		 * so we walk the phyint list and compare against the
		 * phyint_groupname as well.
		 */
		phyint = ipsq->ipsq_phyint_list;
		while (phyint != NULL) {
			if ((group_len == phyint->phyint_groupname_len) &&
			    (bcmp(phyint->phyint_groupname, groupname,
			    group_len) == 0)) {
				/*
				 * Verify that an ipmp groupname is exactly
				 * part of 1 ipsq and is not found in any other
				 * ipsq.
				 */
				ASSERT(ip_ipsq_lookup(groupname, B_FALSE, ipsq)
					== NULL);
				return (ipsq);
			}
			phyint = phyint->phyint_ipsq_next;
		}
	}
	if (create)
		ipsq = ipsq_create(groupname);
	return (ipsq);
}

static void
ipsq_delete(ipsq_t *ipsq)
{
	ipsq_t *nipsq;
	ipsq_t *pipsq = NULL;

	/*
	 * We don't hold the ipsq lock, but we are sure no new
	 * messages can land up, since the ipsq_refs is zero.
	 * i.e. this ipsq is unnamed and no phyint or phyint group
	 * is associated with this ipsq. (Lookups are based on ill_name
	 * or phyint_group_name)
	 */
	ASSERT(ipsq->ipsq_refs == 0);
	ASSERT(ipsq->ipsq_xopq_mphead == NULL && ipsq->ipsq_mphead == NULL);
	ASSERT(ipsq->ipsq_pending_mp == NULL);
	if (!(ipsq->ipsq_flags & IPSQ_GROUP)) {
		/*
		 * This is not the ipsq of an IPMP group.
		 */
		kmem_free(ipsq, sizeof (ipsq_t));
		return;
	}

	rw_enter(&ill_g_lock, RW_WRITER);

	/*
	 * Locate the ipsq  before we can remove it from
	 * the singly linked list of ipsq's.
	 */
	for (nipsq = ipsq_g_head; nipsq != NULL; nipsq = nipsq->ipsq_next) {
		if (nipsq == ipsq) {
			break;
		}
		pipsq = nipsq;
	}

	ASSERT(nipsq == ipsq);

	/* unlink ipsq from the list */
	if (pipsq != NULL)
		pipsq->ipsq_next = ipsq->ipsq_next;
	else
		ipsq_g_head = ipsq->ipsq_next;
	kmem_free(ipsq, sizeof (ipsq_t));
	rw_exit(&ill_g_lock);
}

static void
ill_move_to_new_ipsq(ipsq_t *old_ipsq, ipsq_t *new_ipsq, mblk_t *current_mp,
    queue_t *q)

{

	ASSERT(MUTEX_HELD(&new_ipsq->ipsq_lock));
	ASSERT(old_ipsq->ipsq_mphead == NULL && old_ipsq->ipsq_mptail == NULL);
	ASSERT(old_ipsq->ipsq_pending_ipif == NULL);
	ASSERT(old_ipsq->ipsq_pending_mp == NULL);
	ASSERT(current_mp != NULL);

	ipsq_enq(new_ipsq, q, current_mp, (ipsq_func_t)ip_process_ioctl,
		NEW_OP, NULL);

	ASSERT(new_ipsq->ipsq_xopq_mptail != NULL &&
	    new_ipsq->ipsq_xopq_mphead != NULL);

	/*
	 * move from old ipsq to the new ipsq.
	 */
	new_ipsq->ipsq_xopq_mptail->b_next = old_ipsq->ipsq_xopq_mphead;
	if (old_ipsq->ipsq_xopq_mphead != NULL)
		new_ipsq->ipsq_xopq_mptail = old_ipsq->ipsq_xopq_mptail;

	old_ipsq->ipsq_xopq_mphead = old_ipsq->ipsq_xopq_mptail = NULL;
}

void
ill_group_cleanup(ill_t *ill)
{
	ill_t *ill_v4;
	ill_t *ill_v6;
	ipif_t *ipif;

	ill_v4 = ill->ill_phyint->phyint_illv4;
	ill_v6 = ill->ill_phyint->phyint_illv6;

	if (ill_v4 != NULL) {
		mutex_enter(&ill_v4->ill_lock);
		for (ipif = ill_v4->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			IPIF_UNMARK_MOVING(ipif);
		}
		ill_v4->ill_up_ipifs = B_FALSE;
		mutex_exit(&ill_v4->ill_lock);
	}

	if (ill_v6 != NULL) {
		mutex_enter(&ill_v6->ill_lock);
		for (ipif = ill_v6->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			IPIF_UNMARK_MOVING(ipif);
		}
		ill_v6->ill_up_ipifs = B_FALSE;
		mutex_exit(&ill_v6->ill_lock);
	}
}
/*
 * This function is called when an ill has had a change in its group status
 * to bring up all the ipifs that were up before the change.
 */
int
ill_up_ipifs(ill_t *ill, queue_t *q, mblk_t *mp)
{
	ipif_t *ipif;
	ill_t *ill_v4;
	ill_t *ill_v6;
	ill_t *from_ill;
	int err = 0;


	ASSERT(IAM_WRITER_ILL(ill));

	/*
	 * Except for ipif_state_flags and ill_state_flags the other
	 * fields of the ipif/ill that are modified below are protected
	 * implicitly since we are a writer. We would have tried to down
	 * even an ipif that was already down, in ill_down_ipifs. So we
	 * just blindly clear the IPIF_CHANGING flag here on all ipifs.
	 */
	ill_v4 = ill->ill_phyint->phyint_illv4;
	ill_v6 = ill->ill_phyint->phyint_illv6;
	if (ill_v4 != NULL) {
		ill_v4->ill_up_ipifs = B_TRUE;
		for (ipif = ill_v4->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			mutex_enter(&ill_v4->ill_lock);
			ipif->ipif_state_flags &= ~IPIF_CHANGING;
			IPIF_UNMARK_MOVING(ipif);
			mutex_exit(&ill_v4->ill_lock);
			if (ipif->ipif_was_up) {
				if (!(ipif->ipif_flags & IPIF_UP))
					err = ipif_up(ipif, q, mp);
				ipif->ipif_was_up = B_FALSE;
				if (err != 0) {
					/*
					 * Can there be any other error ?
					 */
					ASSERT(err == EINPROGRESS);
					return (err);
				}
			}
		}
		mutex_enter(&ill_v4->ill_lock);
		ill_v4->ill_state_flags &= ~ILL_CHANGING;
		mutex_exit(&ill_v4->ill_lock);
		ill_v4->ill_up_ipifs = B_FALSE;
		if (ill_v4->ill_move_in_progress) {
			ASSERT(ill_v4->ill_move_peer != NULL);
			ill_v4->ill_move_in_progress = B_FALSE;
			from_ill = ill_v4->ill_move_peer;
			from_ill->ill_move_in_progress = B_FALSE;
			from_ill->ill_move_peer = NULL;
			mutex_enter(&from_ill->ill_lock);
			from_ill->ill_state_flags &= ~ILL_CHANGING;
			mutex_exit(&from_ill->ill_lock);
			if (ill_v6 == NULL) {
				if (from_ill->ill_phyint->phyint_flags &
				    PHYI_STANDBY) {
					phyint_inactive(from_ill->ill_phyint);
				}
				if (ill_v4->ill_phyint->phyint_flags &
				    PHYI_STANDBY) {
					phyint_inactive(ill_v4->ill_phyint);
				}
			}
			ill_v4->ill_move_peer = NULL;
		}
	}

	if (ill_v6 != NULL) {
		ill_v6->ill_up_ipifs = B_TRUE;
		for (ipif = ill_v6->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			mutex_enter(&ill_v6->ill_lock);
			ipif->ipif_state_flags &= ~IPIF_CHANGING;
			IPIF_UNMARK_MOVING(ipif);
			mutex_exit(&ill_v6->ill_lock);
			if (ipif->ipif_was_up) {
				if (!(ipif->ipif_flags & IPIF_UP))
					err = ipif_up(ipif, q, mp);
				ipif->ipif_was_up = B_FALSE;
				if (err != 0) {
					/*
					 * Can there be any other error ?
					 */
					ASSERT(err == EINPROGRESS);
					return (err);
				}
			}
		}
		mutex_enter(&ill_v6->ill_lock);
		ill_v6->ill_state_flags &= ~ILL_CHANGING;
		mutex_exit(&ill_v6->ill_lock);
		ill_v6->ill_up_ipifs = B_FALSE;
		if (ill_v6->ill_move_in_progress) {
			ASSERT(ill_v6->ill_move_peer != NULL);
			ill_v6->ill_move_in_progress = B_FALSE;
			from_ill = ill_v6->ill_move_peer;
			from_ill->ill_move_in_progress = B_FALSE;
			from_ill->ill_move_peer = NULL;
			mutex_enter(&from_ill->ill_lock);
			from_ill->ill_state_flags &= ~ILL_CHANGING;
			mutex_exit(&from_ill->ill_lock);
			if (from_ill->ill_phyint->phyint_flags & PHYI_STANDBY) {
				phyint_inactive(from_ill->ill_phyint);
			}
			if (ill_v6->ill_phyint->phyint_flags & PHYI_STANDBY) {
				phyint_inactive(ill_v6->ill_phyint);
			}
			ill_v6->ill_move_peer = NULL;
		}
	}
	return (0);
}

/*
 * bring down all the approriate ipifs.
 */
/* ARGSUSED */
static void
ill_down_ipifs(ill_t *ill, mblk_t *mp, int index, boolean_t chk_nofailover)
{
	ipif_t *ipif;

	ASSERT(IAM_WRITER_ILL(ill));

	/*
	 * Except for ipif_state_flags the other fields of the ipif/ill that
	 * are modified below are protected implicitly since we are a writer
	 */
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (chk_nofailover && (ipif->ipif_flags & IPIF_NOFAILOVER))
			continue;
		if (index == 0 || index == ipif->ipif_orig_ifindex) {
			/*
			 * We go through the ipif_down logic even if the ipif
			 * is already down, since routes can be added based
			 * on down ipifs. Going through ipif_down once again
			 * will delete any IREs created based on these routes.
			 */
			if (ipif->ipif_flags & IPIF_UP)
				ipif->ipif_was_up = B_TRUE;
			/*
			 * If called with chk_nofailover true ipif is moving.
			 */
			mutex_enter(&ill->ill_lock);
			if (chk_nofailover) {
				ipif->ipif_state_flags |=
					IPIF_MOVING | IPIF_CHANGING;
			} else {
				ipif->ipif_state_flags |= IPIF_CHANGING;
			}
			mutex_exit(&ill->ill_lock);
			/*
			 * Need to re-create net/subnet bcast ires if
			 * they are dependent on ipif.
			 */
			if (!ipif->ipif_isv6)
				ipif_check_bcast_ires(ipif);
			(void) ipif_logical_down(ipif, NULL, NULL);
			ipif_non_duplicate(ipif);
			ipif_down_tail(ipif);
			/*
			 * We don't do ipif_multicast_down for IPv4 in
			 * ipif_down. We need to set this so that
			 * ipif_multicast_up will join the
			 * ALLHOSTS_GROUP on to_ill.
			 */
			ipif->ipif_multicast_up = B_FALSE;
		}
	}
}

#define	IPSQ_INC_REF(ipsq)	{			\
	ASSERT(RW_WRITE_HELD(&ill_g_lock));		\
	(ipsq)->ipsq_refs++;				\
}

#define	IPSQ_DEC_REF(ipsq)	{			\
	ASSERT(RW_WRITE_HELD(&ill_g_lock));		\
	(ipsq)->ipsq_refs--;				\
	if ((ipsq)->ipsq_refs == 0)				\
		(ipsq)->ipsq_name[0] = '\0'; 		\
}

/*
 * Change the ipsq of all the ill's whose current ipsq is 'cur_ipsq' to
 * new_ipsq.
 */
static void
ill_merge_ipsq(ipsq_t *cur_ipsq, ipsq_t *new_ipsq)
{
	phyint_t *phyint;
	phyint_t *next_phyint;

	/*
	 * To change the ipsq of an ill, we need to hold the ill_g_lock as
	 * writer and the ill_lock of the ill in question. Also the dest
	 * ipsq can't vanish while we hold the ill_g_lock as writer.
	 */
	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	phyint = cur_ipsq->ipsq_phyint_list;
	cur_ipsq->ipsq_phyint_list = NULL;
	while (phyint != NULL) {
		next_phyint = phyint->phyint_ipsq_next;
		IPSQ_DEC_REF(cur_ipsq);
		phyint->phyint_ipsq_next = new_ipsq->ipsq_phyint_list;
		new_ipsq->ipsq_phyint_list = phyint;
		IPSQ_INC_REF(new_ipsq);
		phyint->phyint_ipsq = new_ipsq;
		phyint = next_phyint;
	}
}

#define	SPLIT_SUCCESS		0
#define	SPLIT_NOT_NEEDED	1
#define	SPLIT_FAILED		2

int
ill_split_to_grp_ipsq(phyint_t *phyint, ipsq_t *cur_ipsq, boolean_t need_retry)
{
	ipsq_t *newipsq = NULL;

	/*
	 * Assertions denote pre-requisites for changing the ipsq of
	 * a phyint
	 */
	ASSERT(RW_WRITE_HELD(&ill_g_lock));
	/*
	 * <ill-phyint> assocs can't change while ill_g_lock
	 * is held as writer. See ill_phyint_reinit()
	 */
	ASSERT(phyint->phyint_illv4 == NULL ||
	    MUTEX_HELD(&phyint->phyint_illv4->ill_lock));
	ASSERT(phyint->phyint_illv6 == NULL ||
	    MUTEX_HELD(&phyint->phyint_illv6->ill_lock));

	if ((phyint->phyint_groupname_len !=
	    (strlen(cur_ipsq->ipsq_name) + 1) ||
	    bcmp(phyint->phyint_groupname, cur_ipsq->ipsq_name,
	    phyint->phyint_groupname_len) != 0)) {
		/*
		 * Once we fail in creating a new ipsq due to memory shortage,
		 * don't attempt to create new ipsq again, based on another
		 * phyint, since we want all phyints belonging to an IPMP group
		 * to be in the same ipsq even in the event of mem alloc fails.
		 */
		newipsq = ip_ipsq_lookup(phyint->phyint_groupname, !need_retry,
		    cur_ipsq);
		if (newipsq == NULL) {
			/* Memory allocation failure */
			return (SPLIT_FAILED);
		} else {
			/* ipsq_refs protected by ill_g_lock (writer) */
			IPSQ_DEC_REF(cur_ipsq);
			phyint->phyint_ipsq = newipsq;
			phyint->phyint_ipsq_next = newipsq->ipsq_phyint_list;
			newipsq->ipsq_phyint_list = phyint;
			IPSQ_INC_REF(newipsq);
			return (SPLIT_SUCCESS);
		}
	}
	return (SPLIT_NOT_NEEDED);
}

/*
 * The ill locks of the phyint and the ill_g_lock (writer) must be held
 * to do this split
 */
static int
ill_split_to_own_ipsq(phyint_t *phyint, ipsq_t *cur_ipsq)
{
	ipsq_t *newipsq;

	ASSERT(RW_WRITE_HELD(&ill_g_lock));
	/*
	 * <ill-phyint> assocs can't change while ill_g_lock
	 * is held as writer. See ill_phyint_reinit()
	 */

	ASSERT(phyint->phyint_illv4 == NULL ||
	    MUTEX_HELD(&phyint->phyint_illv4->ill_lock));
	ASSERT(phyint->phyint_illv6 == NULL ||
	    MUTEX_HELD(&phyint->phyint_illv6->ill_lock));

	if (!ipsq_init((phyint->phyint_illv4 != NULL) ?
	    phyint->phyint_illv4: phyint->phyint_illv6)) {
		/*
		 * ipsq_init failed due to no memory
		 * caller will use the same ipsq
		 */
		return (SPLIT_FAILED);
	}

	/* ipsq_ref is protected by ill_g_lock (writer) */
	IPSQ_DEC_REF(cur_ipsq);

	/*
	 * This is a new ipsq that is unknown to the world.
	 * So we don't need to hold ipsq_lock,
	 */
	newipsq = phyint->phyint_ipsq;
	newipsq->ipsq_writer = NULL;
	newipsq->ipsq_reentry_cnt--;
	ASSERT(newipsq->ipsq_reentry_cnt == 0);
#ifdef ILL_DEBUG
	newipsq->ipsq_depth = 0;
#endif

	return (SPLIT_SUCCESS);
}

/*
 * Change the ipsq of all the ill's whose current ipsq is 'cur_ipsq' to
 * ipsq's representing their individual groups or themselves. Return
 * whether split needs to be retried again later.
 */
static boolean_t
ill_split_ipsq(ipsq_t *cur_ipsq)
{
	phyint_t *phyint;
	phyint_t *next_phyint;
	int	error;
	boolean_t need_retry = B_FALSE;

	phyint = cur_ipsq->ipsq_phyint_list;
	cur_ipsq->ipsq_phyint_list = NULL;
	while (phyint != NULL) {
		next_phyint = phyint->phyint_ipsq_next;
		/*
		 * 'created' will tell us whether the callee actually
		 * created an ipsq. Lack of memory may force the callee
		 * to return without creating an ipsq.
		 */
		if (phyint->phyint_groupname == NULL) {
			error = ill_split_to_own_ipsq(phyint, cur_ipsq);
		} else {
			error = ill_split_to_grp_ipsq(phyint, cur_ipsq,
					need_retry);
		}

		switch (error) {
		case SPLIT_FAILED:
			need_retry = B_TRUE;
			/* FALLTHRU */
		case SPLIT_NOT_NEEDED:
			/*
			 * Keep it on the list.
			 */
			phyint->phyint_ipsq_next = cur_ipsq->ipsq_phyint_list;
			cur_ipsq->ipsq_phyint_list = phyint;
			break;
		case SPLIT_SUCCESS:
			break;
		default:
			ASSERT(0);
		}

		phyint = next_phyint;
	}
	return (need_retry);
}

/*
 * given an ipsq 'ipsq' lock all ills associated with this ipsq.
 * and return the ills in the list. This list will be
 * needed to unlock all the ills later on by the caller.
 * The <ill-ipsq> associations could change between the
 * lock and unlock. Hence the unlock can't traverse the
 * ipsq to get the list of ills.
 */
static int
ill_lock_ipsq_ills(ipsq_t *ipsq, ill_t **list, int list_max)
{
	int	cnt = 0;
	phyint_t	*phyint;

	/*
	 * The caller holds ill_g_lock to ensure that the ill memberships
	 * of the ipsq don't change
	 */
	ASSERT(RW_LOCK_HELD(&ill_g_lock));

	phyint = ipsq->ipsq_phyint_list;
	while (phyint != NULL) {
		if (phyint->phyint_illv4 != NULL) {
			ASSERT(cnt < list_max);
			list[cnt++] = phyint->phyint_illv4;
		}
		if (phyint->phyint_illv6 != NULL) {
			ASSERT(cnt < list_max);
			list[cnt++] = phyint->phyint_illv6;
		}
		phyint = phyint->phyint_ipsq_next;
	}
	ill_lock_ills(list, cnt);
	return (cnt);
}

void
ill_lock_ills(ill_t **list, int cnt)
{
	int	i;

	if (cnt > 1) {
		boolean_t try_again;
		do {
			try_again = B_FALSE;
			for (i = 0; i < cnt - 1; i++) {
				if (list[i] < list[i + 1]) {
					ill_t	*tmp;

					/* swap the elements */
					tmp = list[i];
					list[i] = list[i + 1];
					list[i + 1] = tmp;
					try_again = B_TRUE;
				}
			}
		} while (try_again);
	}

	for (i = 0; i < cnt; i++) {
		if (i == 0) {
			if (list[i] != NULL)
				mutex_enter(&list[i]->ill_lock);
			else
				return;
		} else if ((list[i-1] != list[i]) && (list[i] != NULL)) {
			mutex_enter(&list[i]->ill_lock);
		}
	}
}

void
ill_unlock_ills(ill_t **list, int cnt)
{
	int	i;

	for (i = 0; i < cnt; i++) {
		if ((i == 0) && (list[i] != NULL)) {
			mutex_exit(&list[i]->ill_lock);
		} else if ((list[i-1] != list[i]) && (list[i] != NULL)) {
			mutex_exit(&list[i]->ill_lock);
		}
	}
}

/*
 * Merge all the ills from 1 ipsq group into another ipsq group.
 * The source ipsq group is specified by the ipsq associated with
 * 'from_ill'. The destination ipsq group is specified by the ipsq
 * associated with 'to_ill' or 'groupname' respectively.
 * Note that ipsq itself does not have a reference count mechanism
 * and functions don't look up an ipsq and pass it around. Instead
 * functions pass around an ill or groupname, and the ipsq is looked
 * up from the ill or groupname and the required operation performed
 * atomically with the lookup on the ipsq.
 */
static int
ill_merge_groups(ill_t *from_ill, ill_t *to_ill, char *groupname, mblk_t *mp,
    queue_t *q)
{
	ipsq_t *old_ipsq;
	ipsq_t *new_ipsq;
	ill_t	**ill_list;
	int	cnt;
	size_t	ill_list_size;
	boolean_t became_writer_on_new_sq = B_FALSE;

	/* Exactly 1 of 'to_ill' and groupname can be specified. */
	ASSERT((to_ill != NULL) ^ (groupname != NULL));

	/*
	 * Need to hold ill_g_lock as writer and also the ill_lock to
	 * change the <ill-ipsq> assoc of an ill. Need to hold the
	 * ipsq_lock to prevent new messages from landing on an ipsq.
	 */
	rw_enter(&ill_g_lock, RW_WRITER);

	old_ipsq = from_ill->ill_phyint->phyint_ipsq;
	if (groupname != NULL)
		new_ipsq = ip_ipsq_lookup(groupname, B_TRUE, NULL);
	else {
		new_ipsq = to_ill->ill_phyint->phyint_ipsq;
	}

	ASSERT(old_ipsq != NULL && new_ipsq != NULL);

	/*
	 * both groups are on the same ipsq.
	 */
	if (old_ipsq == new_ipsq) {
		rw_exit(&ill_g_lock);
		return (0);
	}

	cnt = old_ipsq->ipsq_refs << 1;
	ill_list_size = cnt * sizeof (ill_t *);
	ill_list = kmem_zalloc(ill_list_size, KM_NOSLEEP);
	if (ill_list == NULL) {
		rw_exit(&ill_g_lock);
		return (ENOMEM);
	}
	cnt = ill_lock_ipsq_ills(old_ipsq, ill_list, cnt);

	/* Need ipsq lock to enque messages on new ipsq or to become writer */
	mutex_enter(&new_ipsq->ipsq_lock);
	if ((new_ipsq->ipsq_writer == NULL &&
		new_ipsq->ipsq_current_ipif == NULL) ||
	    (new_ipsq->ipsq_writer == curthread)) {
		new_ipsq->ipsq_writer = curthread;
		new_ipsq->ipsq_reentry_cnt++;
		became_writer_on_new_sq = B_TRUE;
	}

	/*
	 * We are holding ill_g_lock as writer and all the ill locks of
	 * the old ipsq. So the old_ipsq can't be looked up, and hence no new
	 * message can land up on the old ipsq even though we don't hold the
	 * ipsq_lock of the old_ipsq. Now move all messages to the newipsq.
	 */
	ill_move_to_new_ipsq(old_ipsq, new_ipsq, mp, q);

	/*
	 * now change the ipsq of all ills in the 'old_ipsq' to 'new_ipsq'.
	 * 'new_ipsq' has been looked up, and it can't change its <ill-ipsq>
	 * assocs. till we release the ill_g_lock, and hence it can't vanish.
	 */
	ill_merge_ipsq(old_ipsq, new_ipsq);

	/*
	 * Mark the new ipsq as needing a split since it is currently
	 * being shared by more than 1 IPMP group. The split will
	 * occur at the end of ipsq_exit
	 */
	new_ipsq->ipsq_split = B_TRUE;

	/* Now release all the locks */
	mutex_exit(&new_ipsq->ipsq_lock);
	ill_unlock_ills(ill_list, cnt);
	rw_exit(&ill_g_lock);

	kmem_free(ill_list, ill_list_size);

	/*
	 * If we succeeded in becoming writer on the new ipsq, then
	 * drain the new ipsq and start processing  all enqueued messages
	 * including the current ioctl we are processing which is either
	 * a set groupname or failover/failback.
	 */
	if (became_writer_on_new_sq)
		ipsq_exit(new_ipsq, B_TRUE, B_TRUE);

	/*
	 * syncq has been changed and all the messages have been moved.
	 */
	mutex_enter(&old_ipsq->ipsq_lock);
	old_ipsq->ipsq_current_ipif = NULL;
	mutex_exit(&old_ipsq->ipsq_lock);
	return (EINPROGRESS);
}

/*
 * Delete and add the loopback copy and non-loopback copy of
 * the BROADCAST ire corresponding to ill and addr. Used to
 * group broadcast ires together when ill becomes part of
 * a group.
 *
 * This function is also called when ill is leaving the group
 * so that the ires belonging to the group gets re-grouped.
 */
static void
ill_bcast_delete_and_add(ill_t *ill, ipaddr_t addr)
{
	ire_t *ire, *nire, *nire_next, *ire_head = NULL;
	ire_t **ire_ptpn = &ire_head;

	/*
	 * The loopback and non-loopback IREs are inserted in the order in which
	 * they're found, on the basis that they are correctly ordered (loopback
	 * first).
	 */
	for (;;) {
		ire = ire_ctable_lookup(addr, 0, IRE_BROADCAST, ill->ill_ipif,
		    ALL_ZONES, NULL, MATCH_IRE_TYPE | MATCH_IRE_ILL);
		if (ire == NULL)
			break;

		/*
		 * we are passing in KM_SLEEP because it is not easy to
		 * go back to a sane state in case of memory failure.
		 */
		nire = kmem_cache_alloc(ire_cache, KM_SLEEP);
		ASSERT(nire != NULL);
		bzero(nire, sizeof (ire_t));
		/*
		 * Don't use ire_max_frag directly since we don't
		 * hold on to 'ire' until we add the new ire 'nire' and
		 * we don't want the new ire to have a dangling reference
		 * to 'ire'. The ire_max_frag of a broadcast ire must
		 * be in sync with the ipif_mtu of the associate ipif.
		 * For eg. this happens as a result of SIOCSLIFNAME,
		 * SIOCSLIFLNKINFO or a DL_NOTE_SDU_SIZE inititated by
		 * the driver. A change in ire_max_frag triggered as
		 * as a result of path mtu discovery, or due to an
		 * IP_IOC_IRE_ADVISE_NOREPLY from the transport or due a
		 * route change -mtu command does not apply to broadcast ires.
		 *
		 * XXX We need a recovery strategy here if ire_init fails
		 */
		if (ire_init(nire,
		    (uchar_t *)&ire->ire_addr,
		    (uchar_t *)&ire->ire_mask,
		    (uchar_t *)&ire->ire_src_addr,
		    (uchar_t *)&ire->ire_gateway_addr,
		    (uchar_t *)&ire->ire_in_src_addr,
		    ire->ire_stq == NULL ? &ip_loopback_mtu :
			&ire->ire_ipif->ipif_mtu,
		    (ire->ire_nce != NULL ? ire->ire_nce->nce_fp_mp : NULL),
		    ire->ire_rfq,
		    ire->ire_stq,
		    ire->ire_type,
		    (ire->ire_nce != NULL? ire->ire_nce->nce_res_mp : NULL),
		    ire->ire_ipif,
		    ire->ire_in_ill,
		    ire->ire_cmask,
		    ire->ire_phandle,
		    ire->ire_ihandle,
		    ire->ire_flags,
		    &ire->ire_uinfo,
		    NULL,
		    NULL) == NULL) {
			cmn_err(CE_PANIC, "ire_init() failed");
		}
		ire_delete(ire);
		ire_refrele(ire);

		/*
		 * The newly created IREs are inserted at the tail of the list
		 * starting with ire_head. As we've just allocated them no one
		 * knows about them so it's safe.
		 */
		*ire_ptpn = nire;
		ire_ptpn = &nire->ire_next;
	}

	for (nire = ire_head; nire != NULL; nire = nire_next) {
		int error;
		ire_t *oire;
		/* unlink the IRE from our list before calling ire_add() */
		nire_next = nire->ire_next;
		nire->ire_next = NULL;

		/* ire_add adds the ire at the right place in the list */
		oire = nire;
		error = ire_add(&nire, NULL, NULL, NULL, B_FALSE);
		ASSERT(error == 0);
		ASSERT(oire == nire);
		ire_refrele(nire);	/* Held in ire_add */
	}
}

/*
 * This function is usually called when an ill is inserted in
 * a group and all the ipifs are already UP. As all the ipifs
 * are already UP, the broadcast ires have already been created
 * and been inserted. But, ire_add_v4 would not have grouped properly.
 * We need to re-group for the benefit of ip_wput_ire which
 * expects BROADCAST ires to be grouped properly to avoid sending
 * more than one copy of the broadcast packet per group.
 *
 * NOTE : We don't check for ill_ipif_up_count to be non-zero here
 *	  because when ipif_up_done ends up calling this, ires have
 *        already been added before illgrp_insert i.e before ill_group
 *	  has been initialized.
 */
static void
ill_group_bcast_for_xmit(ill_t *ill)
{
	ill_group_t *illgrp;
	ipif_t *ipif;
	ipaddr_t addr;
	ipaddr_t net_mask;
	ipaddr_t subnet_netmask;

	illgrp = ill->ill_group;

	/*
	 * This function is called even when an ill is deleted from
	 * the group. Hence, illgrp could be null.
	 */
	if (illgrp != NULL && illgrp->illgrp_ill_count == 1)
		return;

	/*
	 * Delete all the BROADCAST ires matching this ill and add
	 * them back. This time, ire_add_v4 should take care of
	 * grouping them with others because ill is part of the
	 * group.
	 */
	ill_bcast_delete_and_add(ill, 0);
	ill_bcast_delete_and_add(ill, INADDR_BROADCAST);

	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {

		if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
		    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
			net_mask = ip_net_mask(ipif->ipif_lcl_addr);
		} else {
			net_mask = htonl(IN_CLASSA_NET);
		}
		addr = net_mask & ipif->ipif_subnet;
		ill_bcast_delete_and_add(ill, addr);
		ill_bcast_delete_and_add(ill, ~net_mask | addr);

		subnet_netmask = ipif->ipif_net_mask;
		addr = ipif->ipif_subnet;
		ill_bcast_delete_and_add(ill, addr);
		ill_bcast_delete_and_add(ill, ~subnet_netmask | addr);
	}
}

/*
 * This function is called from illgrp_delete when ill is being deleted
 * from the group.
 *
 * As ill is not there in the group anymore, any address belonging
 * to this ill should be cleared of IRE_MARK_NORECV.
 */
static void
ill_clear_bcast_mark(ill_t *ill, ipaddr_t addr)
{
	ire_t *ire;
	irb_t *irb;

	ASSERT(ill->ill_group == NULL);

	ire = ire_ctable_lookup(addr, 0, IRE_BROADCAST, ill->ill_ipif,
	    ALL_ZONES, NULL, MATCH_IRE_TYPE | MATCH_IRE_ILL);

	if (ire != NULL) {
		/*
		 * IPMP and plumbing operations are serialized on the ipsq, so
		 * no one will insert or delete a broadcast ire under our feet.
		 */
		irb = ire->ire_bucket;
		rw_enter(&irb->irb_lock, RW_READER);
		ire_refrele(ire);

		for (; ire != NULL; ire = ire->ire_next) {
			if (ire->ire_addr != addr)
				break;
			if (ire_to_ill(ire) != ill)
				continue;

			ASSERT(!(ire->ire_marks & IRE_MARK_CONDEMNED));
			ire->ire_marks &= ~IRE_MARK_NORECV;
		}
		rw_exit(&irb->irb_lock);
	}
}

/*
 * This function must be called only after the broadcast ires
 * have been grouped together. For a given address addr, nominate
 * only one of the ires whose interface is not FAILED or OFFLINE.
 *
 * This is also called when an ipif goes down, so that we can nominate
 * a different ire with the same address for receiving.
 */
static void
ill_mark_bcast(ill_group_t *illgrp, ipaddr_t addr)
{
	irb_t *irb;
	ire_t *ire;
	ire_t *ire1;
	ire_t *save_ire;
	ire_t **irep = NULL;
	boolean_t first = B_TRUE;
	ire_t *clear_ire = NULL;
	ire_t *start_ire = NULL;
	ire_t	*new_lb_ire;
	ire_t	*new_nlb_ire;
	boolean_t new_lb_ire_used = B_FALSE;
	boolean_t new_nlb_ire_used = B_FALSE;
	uint64_t match_flags;
	uint64_t phyi_flags;
	boolean_t fallback = B_FALSE;

	ire = ire_ctable_lookup(addr, 0, IRE_BROADCAST, NULL, ALL_ZONES,
	    NULL, MATCH_IRE_TYPE);
	/*
	 * We may not be able to find some ires if a previous
	 * ire_create failed. This happens when an ipif goes
	 * down and we are unable to create BROADCAST ires due
	 * to memory failure. Thus, we have to check for NULL
	 * below. This should handle the case for LOOPBACK,
	 * POINTOPOINT and interfaces with some POINTOPOINT
	 * logicals for which there are no BROADCAST ires.
	 */
	if (ire == NULL)
		return;
	/*
	 * Currently IRE_BROADCASTS are deleted when an ipif
	 * goes down which runs exclusively. Thus, setting
	 * IRE_MARK_RCVD should not race with ire_delete marking
	 * IRE_MARK_CONDEMNED. We grab the lock below just to
	 * be consistent with other parts of the code that walks
	 * a given bucket.
	 */
	save_ire = ire;
	irb = ire->ire_bucket;
	new_lb_ire = kmem_cache_alloc(ire_cache, KM_NOSLEEP);
	if (new_lb_ire == NULL) {
		ire_refrele(ire);
		return;
	}
	new_nlb_ire = kmem_cache_alloc(ire_cache, KM_NOSLEEP);
	if (new_nlb_ire == NULL) {
		ire_refrele(ire);
		kmem_cache_free(ire_cache, new_lb_ire);
		return;
	}
	IRB_REFHOLD(irb);
	rw_enter(&irb->irb_lock, RW_WRITER);
	/*
	 * Get to the first ire matching the address and the
	 * group. If the address does not match we are done
	 * as we could not find the IRE. If the address matches
	 * we should get to the first one matching the group.
	 */
	while (ire != NULL) {
		if (ire->ire_addr != addr ||
		    ire->ire_ipif->ipif_ill->ill_group == illgrp) {
			break;
		}
		ire = ire->ire_next;
	}
	match_flags = PHYI_FAILED | PHYI_INACTIVE;
	start_ire = ire;
redo:
	while (ire != NULL && ire->ire_addr == addr &&
	    ire->ire_ipif->ipif_ill->ill_group == illgrp) {
		/*
		 * The first ire for any address within a group
		 * should always be the one with IRE_MARK_NORECV cleared
		 * so that ip_wput_ire can avoid searching for one.
		 * Note down the insertion point which will be used
		 * later.
		 */
		if (first && (irep == NULL))
			irep = ire->ire_ptpn;
		/*
		 * PHYI_FAILED is set when the interface fails.
		 * This interface might have become good, but the
		 * daemon has not yet detected. We should still
		 * not receive on this. PHYI_OFFLINE should never
		 * be picked as this has been offlined and soon
		 * be removed.
		 */
		phyi_flags = ire->ire_ipif->ipif_ill->ill_phyint->phyint_flags;
		if (phyi_flags & PHYI_OFFLINE) {
			ire->ire_marks |= IRE_MARK_NORECV;
			ire = ire->ire_next;
			continue;
		}
		if (phyi_flags & match_flags) {
			ire->ire_marks |= IRE_MARK_NORECV;
			ire = ire->ire_next;
			if ((phyi_flags & (PHYI_FAILED | PHYI_INACTIVE)) ==
			    PHYI_INACTIVE) {
				fallback = B_TRUE;
			}
			continue;
		}
		if (first) {
			/*
			 * We will move this to the front of the list later
			 * on.
			 */
			clear_ire = ire;
			ire->ire_marks &= ~IRE_MARK_NORECV;
		} else {
			ire->ire_marks |= IRE_MARK_NORECV;
		}
		first = B_FALSE;
		ire = ire->ire_next;
	}
	/*
	 * If we never nominated anybody, try nominating at least
	 * an INACTIVE, if we found one. Do it only once though.
	 */
	if (first && (match_flags == (PHYI_FAILED | PHYI_INACTIVE)) &&
	    fallback) {
		match_flags = PHYI_FAILED;
		ire = start_ire;
		irep = NULL;
		goto redo;
	}
	ire_refrele(save_ire);

	/*
	 * irep non-NULL indicates that we entered the while loop
	 * above. If clear_ire is at the insertion point, we don't
	 * have to do anything. clear_ire will be NULL if all the
	 * interfaces are failed.
	 *
	 * We cannot unlink and reinsert the ire at the right place
	 * in the list since there can be other walkers of this bucket.
	 * Instead we delete and recreate the ire
	 */
	if (clear_ire != NULL && irep != NULL && *irep != clear_ire) {
		ire_t *clear_ire_stq = NULL;
		mblk_t *fp_mp = NULL, *res_mp = NULL;

		bzero(new_lb_ire, sizeof (ire_t));
		if (clear_ire->ire_nce != NULL) {
			fp_mp = clear_ire->ire_nce->nce_fp_mp;
			res_mp = clear_ire->ire_nce->nce_res_mp;
		}
		/* XXX We need a recovery strategy here. */
		if (ire_init(new_lb_ire,
		    (uchar_t *)&clear_ire->ire_addr,
		    (uchar_t *)&clear_ire->ire_mask,
		    (uchar_t *)&clear_ire->ire_src_addr,
		    (uchar_t *)&clear_ire->ire_gateway_addr,
		    (uchar_t *)&clear_ire->ire_in_src_addr,
		    &clear_ire->ire_max_frag,
		    fp_mp,
		    clear_ire->ire_rfq,
		    clear_ire->ire_stq,
		    clear_ire->ire_type,
		    res_mp,
		    clear_ire->ire_ipif,
		    clear_ire->ire_in_ill,
		    clear_ire->ire_cmask,
		    clear_ire->ire_phandle,
		    clear_ire->ire_ihandle,
		    clear_ire->ire_flags,
		    &clear_ire->ire_uinfo,
		    NULL,
		    NULL) == NULL)
			cmn_err(CE_PANIC, "ire_init() failed");
		if (clear_ire->ire_stq == NULL) {
			ire_t *ire_next = clear_ire->ire_next;
			if (ire_next != NULL &&
			    ire_next->ire_stq != NULL &&
			    ire_next->ire_addr == clear_ire->ire_addr &&
			    ire_next->ire_ipif->ipif_ill ==
			    clear_ire->ire_ipif->ipif_ill) {
				clear_ire_stq = ire_next;

				bzero(new_nlb_ire, sizeof (ire_t));
				if (clear_ire_stq->ire_nce != NULL) {
					fp_mp =
					    clear_ire_stq->ire_nce->nce_fp_mp;
					res_mp =
					    clear_ire_stq->ire_nce->nce_res_mp;
				} else {
					fp_mp = res_mp = NULL;
				}
				/* XXX We need a recovery strategy here. */
				if (ire_init(new_nlb_ire,
				    (uchar_t *)&clear_ire_stq->ire_addr,
				    (uchar_t *)&clear_ire_stq->ire_mask,
				    (uchar_t *)&clear_ire_stq->ire_src_addr,
				    (uchar_t *)&clear_ire_stq->ire_gateway_addr,
				    (uchar_t *)&clear_ire_stq->ire_in_src_addr,
				    &clear_ire_stq->ire_max_frag,
				    fp_mp,
				    clear_ire_stq->ire_rfq,
				    clear_ire_stq->ire_stq,
				    clear_ire_stq->ire_type,
				    res_mp,
				    clear_ire_stq->ire_ipif,
				    clear_ire_stq->ire_in_ill,
				    clear_ire_stq->ire_cmask,
				    clear_ire_stq->ire_phandle,
				    clear_ire_stq->ire_ihandle,
				    clear_ire_stq->ire_flags,
				    &clear_ire_stq->ire_uinfo,
				    NULL,
				    NULL) == NULL)
					cmn_err(CE_PANIC, "ire_init() failed");
			}
		}

		/*
		 * Delete the ire. We can't call ire_delete() since
		 * we are holding the bucket lock. We can't release the
		 * bucket lock since we can't allow irep to change. So just
		 * mark it CONDEMNED. The IRB_REFRELE will delete the
		 * ire from the list and do the refrele.
		 */
		clear_ire->ire_marks |= IRE_MARK_CONDEMNED;
		irb->irb_marks |= IRB_MARK_CONDEMNED;

		if (clear_ire_stq != NULL) {
			ire_fastpath_list_delete(
			    (ill_t *)clear_ire_stq->ire_stq->q_ptr,
			    clear_ire_stq);
			clear_ire_stq->ire_marks |= IRE_MARK_CONDEMNED;
		}

		/*
		 * Also take care of otherfields like ib/ob pkt count
		 * etc. Need to dup them. ditto in ill_bcast_delete_and_add
		 */

		/* Add the new ire's. Insert at *irep */
		new_lb_ire->ire_bucket = clear_ire->ire_bucket;
		ire1 = *irep;
		if (ire1 != NULL)
			ire1->ire_ptpn = &new_lb_ire->ire_next;
		new_lb_ire->ire_next = ire1;
		/* Link the new one in. */
		new_lb_ire->ire_ptpn = irep;
		membar_producer();
		*irep = new_lb_ire;
		new_lb_ire_used = B_TRUE;
		BUMP_IRE_STATS(ire_stats_v4, ire_stats_inserted);
		new_lb_ire->ire_bucket->irb_ire_cnt++;
		new_lb_ire->ire_ipif->ipif_ire_cnt++;

		if (clear_ire_stq != NULL) {
			new_nlb_ire->ire_bucket = clear_ire->ire_bucket;
			irep = &new_lb_ire->ire_next;
			/* Add the new ire. Insert at *irep */
			ire1 = *irep;
			if (ire1 != NULL)
				ire1->ire_ptpn = &new_nlb_ire->ire_next;
			new_nlb_ire->ire_next = ire1;
			/* Link the new one in. */
			new_nlb_ire->ire_ptpn = irep;
			membar_producer();
			*irep = new_nlb_ire;
			new_nlb_ire_used = B_TRUE;
			BUMP_IRE_STATS(ire_stats_v4, ire_stats_inserted);
			new_nlb_ire->ire_bucket->irb_ire_cnt++;
			new_nlb_ire->ire_ipif->ipif_ire_cnt++;
			((ill_t *)new_nlb_ire->ire_stq->q_ptr)->ill_ire_cnt++;
		}
	}
	rw_exit(&irb->irb_lock);
	if (!new_lb_ire_used)
		kmem_cache_free(ire_cache, new_lb_ire);
	if (!new_nlb_ire_used)
		kmem_cache_free(ire_cache, new_nlb_ire);
	IRB_REFRELE(irb);
}

/*
 * Whenever an ipif goes down we have to renominate a different
 * broadcast ire to receive. Whenever an ipif comes up, we need
 * to make sure that we have only one nominated to receive.
 */
static void
ipif_renominate_bcast(ipif_t *ipif)
{
	ill_t *ill = ipif->ipif_ill;
	ipaddr_t subnet_addr;
	ipaddr_t net_addr;
	ipaddr_t net_mask = 0;
	ipaddr_t subnet_netmask;
	ipaddr_t addr;
	ill_group_t *illgrp;

	illgrp = ill->ill_group;
	/*
	 * If this is the last ipif going down, it might take
	 * the ill out of the group. In that case ipif_down ->
	 * illgrp_delete takes care of doing the nomination.
	 * ipif_down does not call for this case.
	 */
	ASSERT(illgrp != NULL);

	/* There could not have been any ires associated with this */
	if (ipif->ipif_subnet == 0)
		return;

	ill_mark_bcast(illgrp, 0);
	ill_mark_bcast(illgrp, INADDR_BROADCAST);

	if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
	    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
		net_mask = ip_net_mask(ipif->ipif_lcl_addr);
	} else {
		net_mask = htonl(IN_CLASSA_NET);
	}
	addr = net_mask & ipif->ipif_subnet;
	ill_mark_bcast(illgrp, addr);

	net_addr = ~net_mask | addr;
	ill_mark_bcast(illgrp, net_addr);

	subnet_netmask = ipif->ipif_net_mask;
	addr = ipif->ipif_subnet;
	ill_mark_bcast(illgrp, addr);

	subnet_addr = ~subnet_netmask | addr;
	ill_mark_bcast(illgrp, subnet_addr);
}

/*
 * Whenever we form or delete ill groups, we need to nominate one set of
 * BROADCAST ires for receiving in the group.
 *
 * 1) When ipif_up_done -> ilgrp_insert calls this function, BROADCAST ires
 *    have been added, but ill_ipif_up_count is 0. Thus, we don't assert
 *    for ill_ipif_up_count to be non-zero. This is the only case where
 *    ill_ipif_up_count is zero and we would still find the ires.
 *
 * 2) ip_sioctl_group_name/ifgrp_insert calls this function, at least one
 *    ipif is UP and we just have to do the nomination.
 *
 * 3) When ill_handoff_responsibility calls us, some ill has been removed
 *    from the group. So, we have to do the nomination.
 *
 * Because of (3), there could be just one ill in the group. But we have
 * to nominate still as IRE_MARK_NORCV may have been marked on this.
 * Thus, this function does not optimize when there is only one ill as
 * it is not correct for (3).
 */
static void
ill_nominate_bcast_rcv(ill_group_t *illgrp)
{
	ill_t *ill;
	ipif_t *ipif;
	ipaddr_t subnet_addr;
	ipaddr_t prev_subnet_addr = 0;
	ipaddr_t net_addr;
	ipaddr_t prev_net_addr = 0;
	ipaddr_t net_mask = 0;
	ipaddr_t subnet_netmask;
	ipaddr_t addr;

	/*
	 * When the last memeber is leaving, there is nothing to
	 * nominate.
	 */
	if (illgrp->illgrp_ill_count == 0) {
		ASSERT(illgrp->illgrp_ill == NULL);
		return;
	}

	ill = illgrp->illgrp_ill;
	ASSERT(!ill->ill_isv6);
	/*
	 * We assume that ires with same address and belonging to the
	 * same group, has been grouped together. Nominating a *single*
	 * ill in the group for sending and receiving broadcast is done
	 * by making sure that the first BROADCAST ire (which will be
	 * the one returned by ire_ctable_lookup for ip_rput and the
	 * one that will be used in ip_wput_ire) will be the one that
	 * will not have IRE_MARK_NORECV set.
	 *
	 * 1) ip_rput checks and discards packets received on ires marked
	 *    with IRE_MARK_NORECV. Thus, we don't send up duplicate
	 *    broadcast packets. We need to clear IRE_MARK_NORECV on the
	 *    first ire in the group for every broadcast address in the group.
	 *    ip_rput will accept packets only on the first ire i.e only
	 *    one copy of the ill.
	 *
	 * 2) ip_wput_ire needs to send out just one copy of the broadcast
	 *    packet for the whole group. It needs to send out on the ill
	 *    whose ire has not been marked with IRE_MARK_NORECV. If it sends
	 *    on the one marked with IRE_MARK_NORECV, ip_rput will accept
	 *    the copy echoed back on other port where the ire is not marked
	 *    with IRE_MARK_NORECV.
	 *
	 * Note that we just need to have the first IRE either loopback or
	 * non-loopback (either of them may not exist if ire_create failed
	 * during ipif_down) with IRE_MARK_NORECV not set. ip_rput will
	 * always hit the first one and hence will always accept one copy.
	 *
	 * We have a broadcast ire per ill for all the unique prefixes
	 * hosted on that ill. As we don't have a way of knowing the
	 * unique prefixes on a given ill and hence in the whole group,
	 * we just call ill_mark_bcast on all the prefixes that exist
	 * in the group. For the common case of one prefix, the code
	 * below optimizes by remebering the last address used for
	 * markng. In the case of multiple prefixes, this will still
	 * optimize depending the order of prefixes.
	 *
	 * The only unique address across the whole group is 0.0.0.0 and
	 * 255.255.255.255 and thus we call only once. ill_mark_bcast enables
	 * the first ire in the bucket for receiving and disables the
	 * others.
	 */
	ill_mark_bcast(illgrp, 0);
	ill_mark_bcast(illgrp, INADDR_BROADCAST);
	for (; ill != NULL; ill = ill->ill_group_next) {

		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {

			if (!(ipif->ipif_flags & IPIF_UP) ||
			    ipif->ipif_subnet == 0) {
				continue;
			}
			if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
			    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
				net_mask = ip_net_mask(ipif->ipif_lcl_addr);
			} else {
				net_mask = htonl(IN_CLASSA_NET);
			}
			addr = net_mask & ipif->ipif_subnet;
			if (prev_net_addr == 0 || prev_net_addr != addr) {
				ill_mark_bcast(illgrp, addr);
				net_addr = ~net_mask | addr;
				ill_mark_bcast(illgrp, net_addr);
			}
			prev_net_addr = addr;

			subnet_netmask = ipif->ipif_net_mask;
			addr = ipif->ipif_subnet;
			if (prev_subnet_addr == 0 ||
			    prev_subnet_addr != addr) {
				ill_mark_bcast(illgrp, addr);
				subnet_addr = ~subnet_netmask | addr;
				ill_mark_bcast(illgrp, subnet_addr);
			}
			prev_subnet_addr = addr;
		}
	}
}

/*
 * This function is called while forming ill groups.
 *
 * Currently, we handle only allmulti groups. We want to join
 * allmulti on only one of the ills in the groups. In future,
 * when we have link aggregation, we may have to join normal
 * multicast groups on multiple ills as switch does inbound load
 * balancing. Following are the functions that calls this
 * function :
 *
 * 1) ill_recover_multicast : Interface is coming back UP.
 *    When the first ipif comes back UP, ipif_up_done/ipif_up_done_v6
 *    will call ill_recover_multicast to recover all the multicast
 *    groups. We need to make sure that only one member is joined
 *    in the ill group.
 *
 * 2) ip_addmulti/ip_addmulti_v6 : ill groups has already been formed.
 *    Somebody is joining allmulti. We need to make sure that only one
 *    member is joined in the group.
 *
 * 3) illgrp_insert : If allmulti has already joined, we need to make
 *    sure that only one member is joined in the group.
 *
 * 4) ip_delmulti/ip_delmulti_v6 : Somebody in the group is leaving
 *    allmulti who we have nominated. We need to pick someother ill.
 *
 * 5) illgrp_delete : The ill we nominated is leaving the group,
 *    we need to pick a new ill to join the group.
 *
 * For (1), (2), (5) - we just have to check whether there is
 * a good ill joined in the group. If we could not find any ills
 * joined the group, we should join.
 *
 * For (4), the one that was nominated to receive, left the group.
 * There could be nobody joined in the group when this function is
 * called.
 *
 * For (3) - we need to explicitly check whether there are multiple
 * ills joined in the group.
 *
 * For simplicity, we don't differentiate any of the above cases. We
 * just leave the group if it is joined on any of them and join on
 * the first good ill.
 */
int
ill_nominate_mcast_rcv(ill_group_t *illgrp)
{
	ilm_t *ilm;
	ill_t *ill;
	ill_t *fallback_inactive_ill = NULL;
	ill_t *fallback_failed_ill = NULL;
	int ret = 0;

	/*
	 * Leave the allmulti on all the ills and start fresh.
	 */
	for (ill = illgrp->illgrp_ill; ill != NULL;
	    ill = ill->ill_group_next) {
		if (ill->ill_join_allmulti)
			(void) ip_leave_allmulti(ill->ill_ipif);
	}

	/*
	 * Choose a good ill. Fallback to inactive or failed if
	 * none available. We need to fallback to FAILED in the
	 * case where we have 2 interfaces in a group - where
	 * one of them is failed and another is a good one and
	 * the good one (not marked inactive) is leaving the group.
	 */
	ret = 0;
	for (ill = illgrp->illgrp_ill; ill != NULL;
	    ill = ill->ill_group_next) {
		/* Never pick an offline interface */
		if (ill->ill_phyint->phyint_flags & PHYI_OFFLINE)
			continue;

		if (ill->ill_phyint->phyint_flags & PHYI_FAILED) {
			fallback_failed_ill = ill;
			continue;
		}
		if (ill->ill_phyint->phyint_flags & PHYI_INACTIVE) {
			fallback_inactive_ill = ill;
			continue;
		}
		for (ilm = ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {
			if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
				ret = ip_join_allmulti(ill->ill_ipif);
				/*
				 * ip_join_allmulti can fail because of memory
				 * failures. So, make sure we join at least
				 * on one ill.
				 */
				if (ill->ill_join_allmulti)
					return (0);
			}
		}
	}
	if (ret != 0) {
		/*
		 * If we tried nominating above and failed to do so,
		 * return error. We might have tried multiple times.
		 * But, return the latest error.
		 */
		return (ret);
	}
	if ((ill = fallback_inactive_ill) != NULL) {
		for (ilm = ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {
			if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
				ret = ip_join_allmulti(ill->ill_ipif);
				return (ret);
			}
		}
	} else if ((ill = fallback_failed_ill) != NULL) {
		for (ilm = ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {
			if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
				ret = ip_join_allmulti(ill->ill_ipif);
				return (ret);
			}
		}
	}
	return (0);
}

/*
 * This function is called from illgrp_delete after it is
 * deleted from the group to reschedule responsibilities
 * to a different ill.
 */
static void
ill_handoff_responsibility(ill_t *ill, ill_group_t *illgrp)
{
	ilm_t	*ilm;
	ipif_t	*ipif;
	ipaddr_t subnet_addr;
	ipaddr_t net_addr;
	ipaddr_t net_mask = 0;
	ipaddr_t subnet_netmask;
	ipaddr_t addr;

	ASSERT(ill->ill_group == NULL);
	/*
	 * Broadcast Responsibility:
	 *
	 * 1. If this ill has been nominated for receiving broadcast
	 * packets, we need to find a new one. Before we find a new
	 * one, we need to re-group the ires that are part of this new
	 * group (assumed by ill_nominate_bcast_rcv). We do this by
	 * calling ill_group_bcast_for_xmit(ill) which will do the right
	 * thing for us.
	 *
	 * 2. If this ill was not nominated for receiving broadcast
	 * packets, we need to clear the IRE_MARK_NORECV flag
	 * so that we continue to send up broadcast packets.
	 */
	if (!ill->ill_isv6) {
		/*
		 * Case 1 above : No optimization here. Just redo the
		 * nomination.
		 */
		ill_group_bcast_for_xmit(ill);
		ill_nominate_bcast_rcv(illgrp);

		/*
		 * Case 2 above : Lookup and clear IRE_MARK_NORECV.
		 */
		ill_clear_bcast_mark(ill, 0);
		ill_clear_bcast_mark(ill, INADDR_BROADCAST);

		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {

			if (!(ipif->ipif_flags & IPIF_UP) ||
			    ipif->ipif_subnet == 0) {
				continue;
			}
			if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
			    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
				net_mask = ip_net_mask(ipif->ipif_lcl_addr);
			} else {
				net_mask = htonl(IN_CLASSA_NET);
			}
			addr = net_mask & ipif->ipif_subnet;
			ill_clear_bcast_mark(ill, addr);

			net_addr = ~net_mask | addr;
			ill_clear_bcast_mark(ill, net_addr);

			subnet_netmask = ipif->ipif_net_mask;
			addr = ipif->ipif_subnet;
			ill_clear_bcast_mark(ill, addr);

			subnet_addr = ~subnet_netmask | addr;
			ill_clear_bcast_mark(ill, subnet_addr);
		}
	}

	/*
	 * Multicast Responsibility.
	 *
	 * If we have joined allmulti on this one, find a new member
	 * in the group to join allmulti. As this ill is already part
	 * of allmulti, we don't have to join on this one.
	 *
	 * If we have not joined allmulti on this one, there is no
	 * responsibility to handoff. But we need to take new
	 * responsibility i.e, join allmulti on this one if we need
	 * to.
	 */
	if (ill->ill_join_allmulti) {
		(void) ill_nominate_mcast_rcv(illgrp);
	} else {
		for (ilm = ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {
			if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
				(void) ip_join_allmulti(ill->ill_ipif);
				break;
			}
		}
	}

	/*
	 * We intentionally do the flushing of IRE_CACHES only matching
	 * on the ill and not on groups. Note that we are already deleted
	 * from the group.
	 *
	 * This will make sure that all IRE_CACHES whose stq is pointing
	 * at ill_wq or ire_ipif->ipif_ill pointing at this ill will get
	 * deleted and IRE_CACHES that are not pointing at this ill will
	 * be left alone.
	 */
	if (ill->ill_isv6) {
		ire_walk_ill_v6(MATCH_IRE_ILL | MATCH_IRE_TYPE,
		    IRE_CACHE, illgrp_cache_delete, (char *)ill, ill);
	} else {
		ire_walk_ill_v4(MATCH_IRE_ILL | MATCH_IRE_TYPE,
		    IRE_CACHE, illgrp_cache_delete, (char *)ill, ill);
	}

	/*
	 * Some conn may have cached one of the IREs deleted above. By removing
	 * the ire reference, we clean up the extra reference to the ill held in
	 * ire->ire_stq.
	 */
	ipcl_walk(conn_cleanup_stale_ire, NULL);

	/*
	 * Re-do source address selection for all the members in the
	 * group, if they borrowed source address from one of the ipifs
	 * in this ill.
	 */
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (ill->ill_isv6) {
			ipif_update_other_ipifs_v6(ipif, illgrp);
		} else {
			ipif_update_other_ipifs(ipif, illgrp);
		}
	}
}

/*
 * Delete the ill from the group. The caller makes sure that it is
 * in a group and it okay to delete from the group. So, we always
 * delete here.
 */
static void
illgrp_delete(ill_t *ill)
{
	ill_group_t *illgrp;
	ill_group_t *tmpg;
	ill_t *tmp_ill;

	/*
	 * Reset illgrp_ill_schednext if it was pointing at us.
	 * We need to do this before we set ill_group to NULL.
	 */
	rw_enter(&ill_g_lock, RW_WRITER);
	mutex_enter(&ill->ill_lock);

	illgrp_reset_schednext(ill);

	illgrp = ill->ill_group;

	/* Delete the ill from illgrp. */
	if (illgrp->illgrp_ill == ill) {
		illgrp->illgrp_ill = ill->ill_group_next;
	} else {
		tmp_ill = illgrp->illgrp_ill;
		while (tmp_ill->ill_group_next != ill) {
			tmp_ill = tmp_ill->ill_group_next;
			ASSERT(tmp_ill != NULL);
		}
		tmp_ill->ill_group_next = ill->ill_group_next;
	}
	ill->ill_group = NULL;
	ill->ill_group_next = NULL;

	illgrp->illgrp_ill_count--;
	mutex_exit(&ill->ill_lock);
	rw_exit(&ill_g_lock);

	/*
	 * As this ill is leaving the group, we need to hand off
	 * the responsibilities to the other ills in the group, if
	 * this ill had some responsibilities.
	 */

	ill_handoff_responsibility(ill, illgrp);

	rw_enter(&ill_g_lock, RW_WRITER);

	if (illgrp->illgrp_ill_count == 0) {

		ASSERT(illgrp->illgrp_ill == NULL);
		if (ill->ill_isv6) {
			if (illgrp == illgrp_head_v6) {
				illgrp_head_v6 = illgrp->illgrp_next;
			} else {
				tmpg = illgrp_head_v6;
				while (tmpg->illgrp_next != illgrp) {
					tmpg = tmpg->illgrp_next;
					ASSERT(tmpg != NULL);
				}
				tmpg->illgrp_next = illgrp->illgrp_next;
			}
		} else {
			if (illgrp == illgrp_head_v4) {
				illgrp_head_v4 = illgrp->illgrp_next;
			} else {
				tmpg = illgrp_head_v4;
				while (tmpg->illgrp_next != illgrp) {
					tmpg = tmpg->illgrp_next;
					ASSERT(tmpg != NULL);
				}
				tmpg->illgrp_next = illgrp->illgrp_next;
			}
		}
		mutex_destroy(&illgrp->illgrp_lock);
		mi_free(illgrp);
	}
	rw_exit(&ill_g_lock);

	/*
	 * Even though the ill is out of the group its not necessary
	 * to set ipsq_split as TRUE as the ipifs could be down temporarily
	 * We will split the ipsq when phyint_groupname is set to NULL.
	 */

	/*
	 * Send a routing sockets message if we are deleting from
	 * groups with names.
	 */
	if (ill->ill_phyint->phyint_groupname_len != 0)
		ip_rts_ifmsg(ill->ill_ipif);
}

/*
 * Re-do source address selection. This is normally called when
 * an ill joins the group or when a non-NOLOCAL/DEPRECATED/ANYCAST
 * ipif comes up.
 */
void
ill_update_source_selection(ill_t *ill)
{
	ipif_t *ipif;

	ASSERT(IAM_WRITER_ILL(ill));

	if (ill->ill_group != NULL)
		ill = ill->ill_group->illgrp_ill;

	for (; ill != NULL; ill = ill->ill_group_next) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (ill->ill_isv6)
				ipif_recreate_interface_routes_v6(NULL, ipif);
			else
				ipif_recreate_interface_routes(NULL, ipif);
		}
	}
}

/*
 * Insert ill in a group headed by illgrp_head. The caller can either
 * pass a groupname in which case we search for a group with the
 * same name to insert in or pass a group to insert in. This function
 * would only search groups with names.
 *
 * NOTE : The caller should make sure that there is at least one ipif
 *	  UP on this ill so that illgrp_scheduler can pick this ill
 *	  for outbound packets. If ill_ipif_up_count is zero, we have
 *	  already sent a DL_UNBIND to the driver and we don't want to
 *	  send anymore packets. We don't assert for ipif_up_count
 *	  to be greater than zero, because ipif_up_done wants to call
 *	  this function before bumping up the ipif_up_count. See
 *	  ipif_up_done() for details.
 */
int
illgrp_insert(ill_group_t **illgrp_head, ill_t *ill, char *groupname,
    ill_group_t *grp_to_insert, boolean_t ipif_is_coming_up)
{
	ill_group_t *illgrp;
	ill_t *prev_ill;
	phyint_t *phyi;

	ASSERT(ill->ill_group == NULL);

	rw_enter(&ill_g_lock, RW_WRITER);
	mutex_enter(&ill->ill_lock);

	if (groupname != NULL) {
		/*
		 * Look for a group with a matching groupname to insert.
		 */
		for (illgrp = *illgrp_head; illgrp != NULL;
		    illgrp = illgrp->illgrp_next) {

			ill_t *tmp_ill;

			/*
			 * If we have an ill_group_t in the list which has
			 * no ill_t assigned then we must be in the process of
			 * removing this group. We skip this as illgrp_delete()
			 * will remove it from the list.
			 */
			if ((tmp_ill = illgrp->illgrp_ill) == NULL) {
				ASSERT(illgrp->illgrp_ill_count == 0);
				continue;
			}

			ASSERT(tmp_ill->ill_phyint != NULL);
			phyi = tmp_ill->ill_phyint;
			/*
			 * Look at groups which has names only.
			 */
			if (phyi->phyint_groupname_len == 0)
				continue;
			/*
			 * Names are stored in the phyint common to both
			 * IPv4 and IPv6.
			 */
			if (mi_strcmp(phyi->phyint_groupname,
			    groupname) == 0) {
				break;
			}
		}
	} else {
		/*
		 * If the caller passes in a NULL "grp_to_insert", we
		 * allocate one below and insert this singleton.
		 */
		illgrp = grp_to_insert;
	}

	ill->ill_group_next = NULL;

	if (illgrp == NULL) {
		illgrp = (ill_group_t *)mi_zalloc(sizeof (ill_group_t));
		if (illgrp == NULL) {
			return (ENOMEM);
		}
		illgrp->illgrp_next = *illgrp_head;
		*illgrp_head = illgrp;
		illgrp->illgrp_ill = ill;
		illgrp->illgrp_ill_count = 1;
		ill->ill_group = illgrp;
		/*
		 * Used in illgrp_scheduler to protect multiple threads
		 * from traversing the list.
		 */
		mutex_init(&illgrp->illgrp_lock, NULL, MUTEX_DEFAULT, 0);
	} else {
		ASSERT(ill->ill_net_type ==
		    illgrp->illgrp_ill->ill_net_type);
		ASSERT(ill->ill_type == illgrp->illgrp_ill->ill_type);

		/* Insert ill at tail of this group */
		prev_ill = illgrp->illgrp_ill;
		while (prev_ill->ill_group_next != NULL)
			prev_ill = prev_ill->ill_group_next;
		prev_ill->ill_group_next = ill;
		ill->ill_group = illgrp;
		illgrp->illgrp_ill_count++;
		/*
		 * Inherit group properties. Currently only forwarding
		 * is the property we try to keep the same with all the
		 * ills. When there are more, we will abstract this into
		 * a function.
		 */
		ill->ill_flags &= ~ILLF_ROUTER;
		ill->ill_flags |= (illgrp->illgrp_ill->ill_flags & ILLF_ROUTER);
	}
	mutex_exit(&ill->ill_lock);
	rw_exit(&ill_g_lock);

	/*
	 * 1) When ipif_up_done() calls this function, ipif_up_count
	 *    may be zero as it has not yet been bumped. But the ires
	 *    have already been added. So, we do the nomination here
	 *    itself. But, when ip_sioctl_groupname calls this, it checks
	 *    for ill_ipif_up_count != 0. Thus we don't check for
	 *    ill_ipif_up_count here while nominating broadcast ires for
	 *    receive.
	 *
	 * 2) Similarly, we need to call ill_group_bcast_for_xmit here
	 *    to group them properly as ire_add() has already happened
	 *    in the ipif_up_done() case. For ip_sioctl_groupname/ifgrp_insert
	 *    case, we need to do it here anyway.
	 */
	if (!ill->ill_isv6) {
		ill_group_bcast_for_xmit(ill);
		ill_nominate_bcast_rcv(illgrp);
	}

	if (!ipif_is_coming_up) {
		/*
		 * When ipif_up_done() calls this function, the multicast
		 * groups have not been joined yet. So, there is no point in
		 * nomination. ip_join_allmulti will handle groups when
		 * ill_recover_multicast is called from ipif_up_done() later.
		 */
		(void) ill_nominate_mcast_rcv(illgrp);
		/*
		 * ipif_up_done calls ill_update_source_selection
		 * anyway. Moreover, we don't want to re-create
		 * interface routes while ipif_up_done() still has reference
		 * to them. Refer to ipif_up_done() for more details.
		 */
		ill_update_source_selection(ill);
	}

	/*
	 * Send a routing sockets message if we are inserting into
	 * groups with names.
	 */
	if (groupname != NULL)
		ip_rts_ifmsg(ill->ill_ipif);
	return (0);
}

/*
 * Return the first phyint matching the groupname. There could
 * be more than one when there are ill groups.
 *
 * Needs work: called only from ip_sioctl_groupname
 */
static phyint_t *
phyint_lookup_group(char *groupname)
{
	phyint_t *phyi;

	ASSERT(RW_LOCK_HELD(&ill_g_lock));
	/*
	 * Group names are stored in the phyint - a common structure
	 * to both IPv4 and IPv6.
	 */
	phyi = avl_first(&phyint_g_list.phyint_list_avl_by_index);
	for (; phyi != NULL;
	    phyi = avl_walk(&phyint_g_list.phyint_list_avl_by_index,
	    phyi, AVL_AFTER)) {
		if (phyi->phyint_groupname_len == 0)
			continue;
		ASSERT(phyi->phyint_groupname != NULL);
		if (mi_strcmp(groupname, phyi->phyint_groupname) == 0)
			return (phyi);
	}
	return (NULL);
}



/*
 * MT notes on creation and deletion of IPMP groups
 *
 * Creation and deletion of IPMP groups introduce the need to merge or
 * split the associated serialization objects i.e the ipsq's. Normally all
 * the ills in an IPMP group would map to a single ipsq. If IPMP is not enabled
 * an ill-pair(v4, v6) i.e. phyint would map to a single ipsq. However during
 * the execution of the SIOCSLIFGROUPNAME command the picture changes. There
 * is a need to change the <ill-ipsq> association and we have to operate on both
 * the source and destination IPMP groups. For eg. attempting to set the
 * groupname of hme0 to mpk17-85 when it already belongs to mpk17-84 has to
 * handle 2 IPMP groups and 2 ipsqs. All the ills belonging to either of the
 * source or destination IPMP group are mapped to a single ipsq for executing
 * the SIOCSLIFGROUPNAME command. This is termed as a merge of the ipsq's.
 * The <ill-ipsq> mapping is restored back to normal at a later point. This is
 * termed as a split of the ipsq. The converse of the merge i.e. a split of the
 * ipsq happens while unwinding from ipsq_exit. If at least 1 set groupname
 * occurred on the ipsq, then the ipsq_split flag is set. This indicates the
 * ipsq has to be examined for redoing the <ill-ipsq> associations.
 *
 * In the above example the ioctl handling code locates the current ipsq of hme0
 * which is ipsq(mpk17-84). It then enters the above ipsq immediately or
 * eventually (after queueing the ioctl in ipsq(mpk17-84)). Then it locates
 * the destination ipsq which is ipsq(mpk17-85) and merges the source ipsq into
 * the destination ipsq. If the destination ipsq is not busy, it also enters
 * the destination ipsq exclusively. Now the actual groupname setting operation
 * can proceed. If the destination ipsq is busy, the operation is enqueued
 * on the destination (merged) ipsq and will be handled in the unwind from
 * ipsq_exit.
 *
 * To prevent other threads accessing the ill while the group name change is
 * in progres, we bring down the ipifs which also removes the ill from the
 * group. The group is changed in phyint and when the first ipif on the ill
 * is brought up, the ill is inserted into the right IPMP group by
 * illgrp_insert.
 */
/* ARGSUSED */
int
ip_sioctl_groupname(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	int i;
	char *tmp;
	int namelen;
	ill_t *ill = ipif->ipif_ill;
	ill_t *ill_v4, *ill_v6;
	int err = 0;
	phyint_t *phyi;
	phyint_t *phyi_tmp;
	struct lifreq *lifr;
	mblk_t	*mp1;
	char *groupname;
	ipsq_t *ipsq;

	ASSERT(IAM_WRITER_IPIF(ipif));

	/* Existance verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	lifr = (struct lifreq *)mp1->b_rptr;
	groupname = lifr->lifr_groupname;

	if (ipif->ipif_id != 0)
		return (EINVAL);

	phyi = ill->ill_phyint;
	ASSERT(phyi != NULL);

	if (phyi->phyint_flags & PHYI_VIRTUAL)
		return (EINVAL);

	tmp = groupname;
	for (i = 0; i < LIFNAMSIZ && *tmp != '\0'; tmp++, i++)
		;

	if (i == LIFNAMSIZ) {
		/* no null termination */
		return (EINVAL);
	}

	/*
	 * Calculate the namelen exclusive of the null
	 * termination character.
	 */
	namelen = tmp - groupname;

	ill_v4 = phyi->phyint_illv4;
	ill_v6 = phyi->phyint_illv6;

	/*
	 * ILL cannot be part of a usesrc group and and IPMP group at the
	 * same time. No need to grab the ill_g_usesrc_lock here, see
	 * synchronization notes in ip.c
	 */
	if (ipif->ipif_ill->ill_usesrc_grp_next != NULL) {
		return (EINVAL);
	}

	/*
	 * mark the ill as changing.
	 * this should queue all new requests on the syncq.
	 */
	GRAB_ILL_LOCKS(ill_v4, ill_v6);

	if (ill_v4 != NULL)
		ill_v4->ill_state_flags |= ILL_CHANGING;
	if (ill_v6 != NULL)
		ill_v6->ill_state_flags |= ILL_CHANGING;
	RELEASE_ILL_LOCKS(ill_v4, ill_v6);

	if (namelen == 0) {
		/*
		 * Null string means remove this interface from the
		 * existing group.
		 */
		if (phyi->phyint_groupname_len == 0) {
			/*
			 * Never was in a group.
			 */
			err = 0;
			goto done;
		}

		/*
		 * IPv4 or IPv6 may be temporarily out of the group when all
		 * the ipifs are down. Thus, we need to check for ill_group to
		 * be non-NULL.
		 */
		if (ill_v4 != NULL && ill_v4->ill_group != NULL) {
			ill_down_ipifs(ill_v4, mp, 0, B_FALSE);
			mutex_enter(&ill_v4->ill_lock);
			if (!ill_is_quiescent(ill_v4)) {
				/*
				 * ipsq_pending_mp_add will not fail since
				 * connp is NULL
				 */
				(void) ipsq_pending_mp_add(NULL,
				    ill_v4->ill_ipif, q, mp, ILL_DOWN);
				mutex_exit(&ill_v4->ill_lock);
				err = EINPROGRESS;
				goto done;
			}
			mutex_exit(&ill_v4->ill_lock);
		}

		if (ill_v6 != NULL && ill_v6->ill_group != NULL) {
			ill_down_ipifs(ill_v6, mp, 0, B_FALSE);
			mutex_enter(&ill_v6->ill_lock);
			if (!ill_is_quiescent(ill_v6)) {
				(void) ipsq_pending_mp_add(NULL,
				    ill_v6->ill_ipif, q, mp, ILL_DOWN);
				mutex_exit(&ill_v6->ill_lock);
				err = EINPROGRESS;
				goto done;
			}
			mutex_exit(&ill_v6->ill_lock);
		}

		rw_enter(&ill_g_lock, RW_WRITER);
		GRAB_ILL_LOCKS(ill_v4, ill_v6);
		mutex_enter(&phyi->phyint_lock);
		ASSERT(phyi->phyint_groupname != NULL);
		mi_free(phyi->phyint_groupname);
		phyi->phyint_groupname = NULL;
		phyi->phyint_groupname_len = 0;
		mutex_exit(&phyi->phyint_lock);
		RELEASE_ILL_LOCKS(ill_v4, ill_v6);
		rw_exit(&ill_g_lock);
		err = ill_up_ipifs(ill, q, mp);

		/*
		 * set the split flag so that the ipsq can be split
		 */
		mutex_enter(&phyi->phyint_ipsq->ipsq_lock);
		phyi->phyint_ipsq->ipsq_split = B_TRUE;
		mutex_exit(&phyi->phyint_ipsq->ipsq_lock);

	} else {
		if (phyi->phyint_groupname_len != 0) {
			ASSERT(phyi->phyint_groupname != NULL);
			/* Are we inserting in the same group ? */
			if (mi_strcmp(groupname,
			    phyi->phyint_groupname) == 0) {
				err = 0;
				goto done;
			}
		}

		rw_enter(&ill_g_lock, RW_READER);
		/*
		 * Merge ipsq for the group's.
		 * This check is here as multiple groups/ills might be
		 * sharing the same ipsq.
		 * If we have to merege than the operation is restarted
		 * on the new ipsq.
		 */
		ipsq = ip_ipsq_lookup(groupname, B_FALSE, NULL);
		if (phyi->phyint_ipsq != ipsq) {
			rw_exit(&ill_g_lock);
			err = ill_merge_groups(ill, NULL, groupname, mp, q);
			goto done;
		}
		/*
		 * Running exclusive on new ipsq.
		 */

		ASSERT(ipsq != NULL);
		ASSERT(ipsq->ipsq_writer == curthread);

		/*
		 * Check whether the ill_type and ill_net_type matches before
		 * we allocate any memory so that the cleanup is easier.
		 *
		 * We can't group dissimilar ones as we can't load spread
		 * packets across the group because of potential link-level
		 * header differences.
		 */
		phyi_tmp = phyint_lookup_group(groupname);
		if (phyi_tmp != NULL) {
			if ((ill_v4 != NULL &&
			    phyi_tmp->phyint_illv4 != NULL) &&
			    ((ill_v4->ill_net_type !=
			    phyi_tmp->phyint_illv4->ill_net_type) ||
			    (ill_v4->ill_type !=
			    phyi_tmp->phyint_illv4->ill_type))) {
				mutex_enter(&phyi->phyint_ipsq->ipsq_lock);
				phyi->phyint_ipsq->ipsq_split = B_TRUE;
				mutex_exit(&phyi->phyint_ipsq->ipsq_lock);
				rw_exit(&ill_g_lock);
				return (EINVAL);
			}
			if ((ill_v6 != NULL &&
			    phyi_tmp->phyint_illv6 != NULL) &&
			    ((ill_v6->ill_net_type !=
			    phyi_tmp->phyint_illv6->ill_net_type) ||
			    (ill_v6->ill_type !=
			    phyi_tmp->phyint_illv6->ill_type))) {
				mutex_enter(&phyi->phyint_ipsq->ipsq_lock);
				phyi->phyint_ipsq->ipsq_split = B_TRUE;
				mutex_exit(&phyi->phyint_ipsq->ipsq_lock);
				rw_exit(&ill_g_lock);
				return (EINVAL);
			}
		}

		rw_exit(&ill_g_lock);

		/*
		 * bring down all v4 ipifs.
		 */
		if (ill_v4 != NULL) {
			ill_down_ipifs(ill_v4, mp, 0, B_FALSE);
		}

		/*
		 * bring down all v6 ipifs.
		 */
		if (ill_v6 != NULL) {
			ill_down_ipifs(ill_v6, mp, 0, B_FALSE);
		}

		/*
		 * make sure all ipifs are down and there are no active
		 * references. Call to ipsq_pending_mp_add will not fail
		 * since connp is NULL.
		 */
		if (ill_v4 != NULL) {
			mutex_enter(&ill_v4->ill_lock);
			if (!ill_is_quiescent(ill_v4)) {
				(void) ipsq_pending_mp_add(NULL,
				    ill_v4->ill_ipif, q, mp, ILL_DOWN);
				mutex_exit(&ill_v4->ill_lock);
				err = EINPROGRESS;
				goto done;
			}
			mutex_exit(&ill_v4->ill_lock);
		}

		if (ill_v6 != NULL) {
			mutex_enter(&ill_v6->ill_lock);
			if (!ill_is_quiescent(ill_v6)) {
				(void) ipsq_pending_mp_add(NULL,
				    ill_v6->ill_ipif, q, mp, ILL_DOWN);
				mutex_exit(&ill_v6->ill_lock);
				err = EINPROGRESS;
				goto done;
			}
			mutex_exit(&ill_v6->ill_lock);
		}

		/*
		 * allocate including space for null terminator
		 * before we insert.
		 */
		tmp = (char *)mi_alloc(namelen + 1, BPRI_MED);
		if (tmp == NULL)
			return (ENOMEM);

		rw_enter(&ill_g_lock, RW_WRITER);
		GRAB_ILL_LOCKS(ill_v4, ill_v6);
		mutex_enter(&phyi->phyint_lock);
		if (phyi->phyint_groupname_len != 0) {
			ASSERT(phyi->phyint_groupname != NULL);
			mi_free(phyi->phyint_groupname);
		}

		/*
		 * setup the new group name.
		 */
		phyi->phyint_groupname = tmp;
		bcopy(groupname, phyi->phyint_groupname, namelen + 1);
		phyi->phyint_groupname_len = namelen + 1;
		mutex_exit(&phyi->phyint_lock);
		RELEASE_ILL_LOCKS(ill_v4, ill_v6);
		rw_exit(&ill_g_lock);

		err = ill_up_ipifs(ill, q, mp);
	}

done:
	/*
	 *  normally ILL_CHANGING is cleared in ill_up_ipifs.
	 */
	if (err != EINPROGRESS) {
		GRAB_ILL_LOCKS(ill_v4, ill_v6);
		if (ill_v4 != NULL)
			ill_v4->ill_state_flags &= ~ILL_CHANGING;
		if (ill_v6 != NULL)
			ill_v6->ill_state_flags &= ~ILL_CHANGING;
		RELEASE_ILL_LOCKS(ill_v4, ill_v6);
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_get_groupname(ipif_t *ipif, sin_t *dummy_sin, queue_t *q,
    mblk_t *mp, ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	ill_t *ill;
	phyint_t *phyi;
	struct lifreq *lifr;
	mblk_t	*mp1;

	/* Existence verified in ip_wput_nondata */
	mp1 = mp->b_cont->b_cont;
	lifr = (struct lifreq *)mp1->b_rptr;
	ill = ipif->ipif_ill;
	phyi = ill->ill_phyint;

	lifr->lifr_groupname[0] = '\0';
	/*
	 * ill_group may be null if all the interfaces
	 * are down. But still, the phyint should always
	 * hold the name.
	 */
	if (phyi->phyint_groupname_len != 0) {
		bcopy(phyi->phyint_groupname, lifr->lifr_groupname,
		    phyi->phyint_groupname_len);
	}

	return (0);
}


typedef struct conn_move_s {
	ill_t	*cm_from_ill;
	ill_t	*cm_to_ill;
	int	cm_ifindex;
} conn_move_t;

/*
 * ipcl_walk function for moving conn_multicast_ill for a given ill.
 */
static void
conn_move(conn_t *connp, caddr_t arg)
{
	conn_move_t *connm;
	int ifindex;
	int i;
	ill_t *from_ill;
	ill_t *to_ill;
	ilg_t *ilg;
	ilm_t *ret_ilm;

	connm = (conn_move_t *)arg;
	ifindex = connm->cm_ifindex;
	from_ill = connm->cm_from_ill;
	to_ill = connm->cm_to_ill;

	/* Change IP_BOUND_IF/IPV6_BOUND_IF associations. */

	/* All multicast fields protected by conn_lock */
	mutex_enter(&connp->conn_lock);
	ASSERT(connp->conn_outgoing_ill == connp->conn_incoming_ill);
	if ((connp->conn_outgoing_ill == from_ill) &&
	    (ifindex == 0 || connp->conn_orig_bound_ifindex == ifindex)) {
		connp->conn_outgoing_ill = to_ill;
		connp->conn_incoming_ill = to_ill;
	}

	/* Change IP_MULTICAST_IF/IPV6_MULTICAST_IF associations */

	if ((connp->conn_multicast_ill == from_ill) &&
	    (ifindex == 0 || connp->conn_orig_multicast_ifindex == ifindex)) {
		connp->conn_multicast_ill = connm->cm_to_ill;
	}

	/* Change IP_XMIT_IF associations */
	if ((connp->conn_xmit_if_ill == from_ill) &&
	    (ifindex == 0 || connp->conn_orig_xmit_ifindex == ifindex)) {
		connp->conn_xmit_if_ill = to_ill;
	}
	/*
	 * Change the ilg_ill to point to the new one. This assumes
	 * ilm_move_v6 has moved the ilms to new_ill and the driver
	 * has been told to receive packets on this interface.
	 * ilm_move_v6 FAILBACKS all the ilms successfully always.
	 * But when doing a FAILOVER, it might fail with ENOMEM and so
	 * some ilms may not have moved. We check to see whether
	 * the ilms have moved to to_ill. We can't check on from_ill
	 * as in the process of moving, we could have split an ilm
	 * in to two - which has the same orig_ifindex and v6group.
	 *
	 * For IPv4, ilg_ipif moves implicitly. The code below really
	 * does not do anything for IPv4 as ilg_ill is NULL for IPv4.
	 */
	for (i = connp->conn_ilg_inuse - 1; i >= 0; i--) {
		ilg = &connp->conn_ilg[i];
		if ((ilg->ilg_ill == from_ill) &&
		    (ifindex == 0 || ilg->ilg_orig_ifindex == ifindex)) {
			/* ifindex != 0 indicates failback */
			if (ifindex != 0) {
				connp->conn_ilg[i].ilg_ill = to_ill;
				continue;
			}

			ret_ilm = ilm_lookup_ill_index_v6(to_ill,
			    &ilg->ilg_v6group, ilg->ilg_orig_ifindex,
			    connp->conn_zoneid);

			if (ret_ilm != NULL)
				connp->conn_ilg[i].ilg_ill = to_ill;
		}
	}
	mutex_exit(&connp->conn_lock);
}

static void
conn_move_ill(ill_t *from_ill, ill_t *to_ill, int ifindex)
{
	conn_move_t connm;

	connm.cm_from_ill = from_ill;
	connm.cm_to_ill = to_ill;
	connm.cm_ifindex = ifindex;

	ipcl_walk(conn_move, (caddr_t)&connm);
}

/*
 * ilm has been moved from from_ill to to_ill.
 * Send DL_DISABMULTI_REQ to ill and DL_ENABMULTI_REQ on to_ill.
 * appropriately.
 *
 * NOTE : We can't reuse the code in ip_ll_addmulti/delmulti because
 *	  the code there de-references ipif_ill to get the ill to
 *	  send multicast requests. It does not work as ipif is on its
 *	  move and already moved when this function is called.
 *	  Thus, we need to use from_ill and to_ill send down multicast
 *	  requests.
 */
static void
ilm_send_multicast_reqs(ill_t *from_ill, ill_t *to_ill)
{
	ipif_t *ipif;
	ilm_t *ilm;

	/*
	 * See whether we need to send down DL_ENABMULTI_REQ on
	 * to_ill as ilm has just been added.
	 */
	ASSERT(IAM_WRITER_ILL(to_ill));
	ASSERT(IAM_WRITER_ILL(from_ill));

	ILM_WALKER_HOLD(to_ill);
	for (ilm = to_ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {

		if (!ilm->ilm_is_new || (ilm->ilm_flags & ILM_DELETED))
			continue;
		/*
		 * no locks held, ill/ipif cannot dissappear as long
		 * as we are writer.
		 */
		ipif = to_ill->ill_ipif;
		/*
		 * No need to hold any lock as we are the writer and this
		 * can only be changed by a writer.
		 */
		ilm->ilm_is_new = B_FALSE;

		if (to_ill->ill_net_type != IRE_IF_RESOLVER ||
		    ipif->ipif_flags & IPIF_POINTOPOINT) {
			ip1dbg(("ilm_send_multicast_reqs: to_ill not "
			    "resolver\n"));
			continue;		/* Must be IRE_IF_NORESOLVER */
		}


		if (to_ill->ill_phyint->phyint_flags & PHYI_MULTI_BCAST) {
			ip1dbg(("ilm_send_multicast_reqs: "
			    "to_ill MULTI_BCAST\n"));
			goto from;
		}

		if (to_ill->ill_isv6)
			mld_joingroup(ilm);
		else
			igmp_joingroup(ilm);

		if (to_ill->ill_ipif_up_count == 0) {
			/*
			 * Nobody there. All multicast addresses will be
			 * re-joined when we get the DL_BIND_ACK bringing the
			 * interface up.
			 */
			ilm->ilm_notify_driver = B_FALSE;
			ip1dbg(("ilm_send_multicast_reqs: to_ill nobody up\n"));
			goto from;
		}

		/*
		 * For allmulti address, we want to join on only one interface.
		 * Checking for ilm_numentries_v6 is not correct as you may
		 * find an ilm with zero address on to_ill, but we may not
		 * have nominated to_ill for receiving. Thus, if we have
		 * nominated from_ill (ill_join_allmulti is set), nominate
		 * only if to_ill is not already nominated (to_ill normally
		 * should not have been nominated if "from_ill" has already
		 * been nominated. As we don't prevent failovers from happening
		 * across groups, we don't assert).
		 */
		if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
			/*
			 * There is no need to hold ill locks as we are
			 * writer on both ills and when ill_join_allmulti
			 * is changed the thread is always a writer.
			 */
			if (from_ill->ill_join_allmulti &&
			    !to_ill->ill_join_allmulti) {
				(void) ip_join_allmulti(to_ill->ill_ipif);
			}
		} else if (ilm->ilm_notify_driver) {

			/*
			 * This is a newly moved ilm so we need to tell the
			 * driver about the new group. There can be more than
			 * one ilm's for the same group in the list each with a
			 * different orig_ifindex. We have to inform the driver
			 * once. In ilm_move_v[4,6] we only set the flag
			 * ilm_notify_driver for the first ilm.
			 */

			(void) ip_ll_send_enabmulti_req(to_ill,
			    &ilm->ilm_v6addr);
		}

		ilm->ilm_notify_driver = B_FALSE;

		/*
		 * See whether we need to send down DL_DISABMULTI_REQ on
		 * from_ill as ilm has just been removed.
		 */
from:
		ipif = from_ill->ill_ipif;
		if (from_ill->ill_net_type != IRE_IF_RESOLVER ||
		    ipif->ipif_flags & IPIF_POINTOPOINT) {
			ip1dbg(("ilm_send_multicast_reqs: "
			    "from_ill not resolver\n"));
			continue;		/* Must be IRE_IF_NORESOLVER */
		}

		if (from_ill->ill_phyint->phyint_flags & PHYI_MULTI_BCAST) {
			ip1dbg(("ilm_send_multicast_reqs: "
			    "from_ill MULTI_BCAST\n"));
			continue;
		}

		if (IN6_IS_ADDR_UNSPECIFIED(&ilm->ilm_v6addr)) {
			if (from_ill->ill_join_allmulti)
			    (void) ip_leave_allmulti(from_ill->ill_ipif);
		} else if (ilm_numentries_v6(from_ill, &ilm->ilm_v6addr) == 0) {
			(void) ip_ll_send_disabmulti_req(from_ill,
		    &ilm->ilm_v6addr);
		}
	}
	ILM_WALKER_RELE(to_ill);
}

/*
 * This function is called when all multicast memberships needs
 * to be moved from "from_ill" to "to_ill" for IPv6. This function is
 * called only once unlike the IPv4 counterpart where it is called after
 * every logical interface is moved. The reason is due to multicast
 * memberships are joined using an interface address in IPv4 while in
 * IPv6, interface index is used.
 */
static void
ilm_move_v6(ill_t *from_ill, ill_t *to_ill, int ifindex)
{
	ilm_t	*ilm;
	ilm_t	*ilm_next;
	ilm_t	*new_ilm;
	ilm_t	**ilmp;
	int	count;
	char buf[INET6_ADDRSTRLEN];
	in6_addr_t ipv6_snm = ipv6_solicited_node_mcast;

	ASSERT(MUTEX_HELD(&to_ill->ill_lock));
	ASSERT(MUTEX_HELD(&from_ill->ill_lock));
	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	if (ifindex == 0) {
		/*
		 * Form the solicited node mcast address which is used later.
		 */
		ipif_t *ipif;

		ipif = from_ill->ill_ipif;
		ASSERT(ipif->ipif_id == 0);

		ipv6_snm.s6_addr32[3] |= ipif->ipif_v6lcl_addr.s6_addr32[3];
	}

	ilmp = &from_ill->ill_ilm;
	for (ilm = from_ill->ill_ilm; ilm != NULL; ilm = ilm_next) {
		ilm_next = ilm->ilm_next;

		if (ilm->ilm_flags & ILM_DELETED) {
			ilmp = &ilm->ilm_next;
			continue;
		}

		new_ilm = ilm_lookup_ill_index_v6(to_ill, &ilm->ilm_v6addr,
		    ilm->ilm_orig_ifindex, ilm->ilm_zoneid);
		ASSERT(ilm->ilm_orig_ifindex != 0);
		if (ilm->ilm_orig_ifindex == ifindex) {
			/*
			 * We are failing back multicast memberships.
			 * If the same ilm exists in to_ill, it means somebody
			 * has joined the same group there e.g. ff02::1
			 * is joined within the kernel when the interfaces
			 * came UP.
			 */
			ASSERT(ilm->ilm_ipif == NULL);
			if (new_ilm != NULL) {
				new_ilm->ilm_refcnt += ilm->ilm_refcnt;
				if (new_ilm->ilm_fmode != MODE_IS_EXCLUDE ||
				    !SLIST_IS_EMPTY(new_ilm->ilm_filter)) {
					new_ilm->ilm_is_new = B_TRUE;
				}
			} else {
				/*
				 * check if we can just move the ilm
				 */
				if (from_ill->ill_ilm_walker_cnt != 0) {
					/*
					 * We have walkers we cannot move
					 * the ilm, so allocate a new ilm,
					 * this (old) ilm will be marked
					 * ILM_DELETED at the end of the loop
					 * and will be freed when the
					 * last walker exits.
					 */
					new_ilm = (ilm_t *)mi_zalloc
					    (sizeof (ilm_t));
					if (new_ilm == NULL) {
						ip0dbg(("ilm_move_v6: "
						    "FAILBACK of IPv6"
						    " multicast address %s : "
						    "from %s to"
						    " %s failed : ENOMEM \n",
						    inet_ntop(AF_INET6,
						    &ilm->ilm_v6addr, buf,
						    sizeof (buf)),
						    from_ill->ill_name,
						    to_ill->ill_name));

							ilmp = &ilm->ilm_next;
							continue;
					}
					*new_ilm = *ilm;
					/*
					 * we don't want new_ilm linked to
					 * ilm's filter list.
					 */
					new_ilm->ilm_filter = NULL;
				} else {
					/*
					 * No walkers we can move the ilm.
					 * lets take it out of the list.
					 */
					*ilmp = ilm->ilm_next;
					ilm->ilm_next = NULL;
					new_ilm = ilm;
				}

				/*
				 * if this is the first ilm for the group
				 * set ilm_notify_driver so that we notify the
				 * driver in ilm_send_multicast_reqs.
				 */
				if (ilm_lookup_ill_v6(to_ill,
				    &new_ilm->ilm_v6addr, ALL_ZONES) == NULL)
					new_ilm->ilm_notify_driver = B_TRUE;

				new_ilm->ilm_ill = to_ill;
				/* Add to the to_ill's list */
				new_ilm->ilm_next = to_ill->ill_ilm;
				to_ill->ill_ilm = new_ilm;
				/*
				 * set the flag so that mld_joingroup is
				 * called in ilm_send_multicast_reqs().
				 */
				new_ilm->ilm_is_new = B_TRUE;
			}
			goto bottom;
		} else if (ifindex != 0) {
			/*
			 * If this is FAILBACK (ifindex != 0) and the ifindex
			 * has not matched above, look at the next ilm.
			 */
			ilmp = &ilm->ilm_next;
			continue;
		}
		/*
		 * If we are here, it means ifindex is 0. Failover
		 * everything.
		 *
		 * We need to handle solicited node mcast address
		 * and all_nodes mcast address differently as they
		 * are joined witin the kenrel (ipif_multicast_up)
		 * and potentially from the userland. We are called
		 * after the ipifs of from_ill has been moved.
		 * If we still find ilms on ill with solicited node
		 * mcast address or all_nodes mcast address, it must
		 * belong to the UP interface that has not moved e.g.
		 * ipif_id 0 with the link local prefix does not move.
		 * We join this on the new ill accounting for all the
		 * userland memberships so that applications don't
		 * see any failure.
		 *
		 * We need to make sure that we account only for the
		 * solicited node and all node multicast addresses
		 * that was brought UP on these. In the case of
		 * a failover from A to B, we might have ilms belonging
		 * to A (ilm_orig_ifindex pointing at A) on B accounting
		 * for the membership from the userland. If we are failing
		 * over from B to C now, we will find the ones belonging
		 * to A on B. These don't account for the ill_ipif_up_count.
		 * They just move from B to C. The check below on
		 * ilm_orig_ifindex ensures that.
		 */
		if ((ilm->ilm_orig_ifindex ==
		    from_ill->ill_phyint->phyint_ifindex) &&
		    (IN6_ARE_ADDR_EQUAL(&ipv6_snm, &ilm->ilm_v6addr) ||
		    IN6_ARE_ADDR_EQUAL(&ipv6_all_hosts_mcast,
		    &ilm->ilm_v6addr))) {
			ASSERT(ilm->ilm_refcnt > 0);
			count = ilm->ilm_refcnt - from_ill->ill_ipif_up_count;
			/*
			 * For indentation reasons, we are not using a
			 * "else" here.
			 */
			if (count == 0) {
				ilmp = &ilm->ilm_next;
				continue;
			}
			ilm->ilm_refcnt -= count;
			if (new_ilm != NULL) {
				/*
				 * Can find one with the same
				 * ilm_orig_ifindex, if we are failing
				 * over to a STANDBY. This happens
				 * when somebody wants to join a group
				 * on a STANDBY interface and we
				 * internally join on a different one.
				 * If we had joined on from_ill then, a
				 * failover now will find a new ilm
				 * with this index.
				 */
				ip1dbg(("ilm_move_v6: FAILOVER, found"
				    " new ilm on %s, group address %s\n",
				    to_ill->ill_name,
				    inet_ntop(AF_INET6,
				    &ilm->ilm_v6addr, buf,
				    sizeof (buf))));
				new_ilm->ilm_refcnt += count;
				if (new_ilm->ilm_fmode != MODE_IS_EXCLUDE ||
				    !SLIST_IS_EMPTY(new_ilm->ilm_filter)) {
					new_ilm->ilm_is_new = B_TRUE;
				}
			} else {
				new_ilm = (ilm_t *)mi_zalloc(sizeof (ilm_t));
				if (new_ilm == NULL) {
					ip0dbg(("ilm_move_v6: FAILOVER of IPv6"
					    " multicast address %s : from %s to"
					    " %s failed : ENOMEM \n",
					    inet_ntop(AF_INET6,
					    &ilm->ilm_v6addr, buf,
					    sizeof (buf)), from_ill->ill_name,
					    to_ill->ill_name));
					ilmp = &ilm->ilm_next;
					continue;
				}
				*new_ilm = *ilm;
				new_ilm->ilm_filter = NULL;
				new_ilm->ilm_refcnt = count;
				new_ilm->ilm_timer = INFINITY;
				new_ilm->ilm_rtx.rtx_timer = INFINITY;
				new_ilm->ilm_is_new = B_TRUE;
				/*
				 * If the to_ill has not joined this
				 * group we need to tell the driver in
				 * ill_send_multicast_reqs.
				 */
				if (ilm_lookup_ill_v6(to_ill,
				    &new_ilm->ilm_v6addr, ALL_ZONES) == NULL)
					new_ilm->ilm_notify_driver = B_TRUE;

				new_ilm->ilm_ill = to_ill;
				/* Add to the to_ill's list */
				new_ilm->ilm_next = to_ill->ill_ilm;
				to_ill->ill_ilm = new_ilm;
				ASSERT(new_ilm->ilm_ipif == NULL);
			}
			if (ilm->ilm_refcnt == 0) {
				goto bottom;
			} else {
				new_ilm->ilm_fmode = MODE_IS_EXCLUDE;
				CLEAR_SLIST(new_ilm->ilm_filter);
				ilmp = &ilm->ilm_next;
			}
			continue;
		} else {
			/*
			 * ifindex = 0 means, move everything pointing at
			 * from_ill. We are doing this becuase ill has
			 * either FAILED or became INACTIVE.
			 *
			 * As we would like to move things later back to
			 * from_ill, we want to retain the identity of this
			 * ilm. Thus, we don't blindly increment the reference
			 * count on the ilms matching the address alone. We
			 * need to match on the ilm_orig_index also. new_ilm
			 * was obtained by matching ilm_orig_index also.
			 */
			if (new_ilm != NULL) {
				/*
				 * This is possible only if a previous restore
				 * was incomplete i.e restore to
				 * ilm_orig_ifindex left some ilms because
				 * of some failures. Thus when we are failing
				 * again, we might find our old friends there.
				 */
				ip1dbg(("ilm_move_v6: FAILOVER, found new ilm"
				    " on %s, group address %s\n",
				    to_ill->ill_name,
				    inet_ntop(AF_INET6,
				    &ilm->ilm_v6addr, buf,
				    sizeof (buf))));
				new_ilm->ilm_refcnt += ilm->ilm_refcnt;
				if (new_ilm->ilm_fmode != MODE_IS_EXCLUDE ||
				    !SLIST_IS_EMPTY(new_ilm->ilm_filter)) {
					new_ilm->ilm_is_new = B_TRUE;
				}
			} else {
				if (from_ill->ill_ilm_walker_cnt != 0) {
					new_ilm = (ilm_t *)
					    mi_zalloc(sizeof (ilm_t));
					if (new_ilm == NULL) {
						ip0dbg(("ilm_move_v6: "
						    "FAILOVER of IPv6"
						    " multicast address %s : "
						    "from %s to"
						    " %s failed : ENOMEM \n",
						    inet_ntop(AF_INET6,
						    &ilm->ilm_v6addr, buf,
						    sizeof (buf)),
						    from_ill->ill_name,
						    to_ill->ill_name));

							ilmp = &ilm->ilm_next;
							continue;
					}
					*new_ilm = *ilm;
					new_ilm->ilm_filter = NULL;
				} else {
					*ilmp = ilm->ilm_next;
					new_ilm = ilm;
				}
				/*
				 * If the to_ill has not joined this
				 * group we need to tell the driver in
				 * ill_send_multicast_reqs.
				 */
				if (ilm_lookup_ill_v6(to_ill,
				    &new_ilm->ilm_v6addr, ALL_ZONES) == NULL)
					new_ilm->ilm_notify_driver = B_TRUE;

				/* Add to the to_ill's list */
				new_ilm->ilm_next = to_ill->ill_ilm;
				to_ill->ill_ilm = new_ilm;
				ASSERT(ilm->ilm_ipif == NULL);
				new_ilm->ilm_ill = to_ill;
				new_ilm->ilm_is_new = B_TRUE;
			}

		}

bottom:
		/*
		 * Revert multicast filter state to (EXCLUDE, NULL).
		 * new_ilm->ilm_is_new should already be set if needed.
		 */
		new_ilm->ilm_fmode = MODE_IS_EXCLUDE;
		CLEAR_SLIST(new_ilm->ilm_filter);
		/*
		 * We allocated/got a new ilm, free the old one.
		 */
		if (new_ilm != ilm) {
			if (from_ill->ill_ilm_walker_cnt == 0) {
				*ilmp = ilm->ilm_next;
				ilm->ilm_next = NULL;
				FREE_SLIST(ilm->ilm_filter);
				FREE_SLIST(ilm->ilm_pendsrcs);
				FREE_SLIST(ilm->ilm_rtx.rtx_allow);
				FREE_SLIST(ilm->ilm_rtx.rtx_block);
				mi_free((char *)ilm);
			} else {
				ilm->ilm_flags |= ILM_DELETED;
				from_ill->ill_ilm_cleanup_reqd = 1;
				ilmp = &ilm->ilm_next;
			}
		}
	}
}

/*
 * Move all the multicast memberships to to_ill. Called when
 * an ipif moves from "from_ill" to "to_ill". This function is slightly
 * different from IPv6 counterpart as multicast memberships are associated
 * with ills in IPv6. This function is called after every ipif is moved
 * unlike IPv6, where it is moved only once.
 */
static void
ilm_move_v4(ill_t *from_ill, ill_t *to_ill, ipif_t *ipif)
{
	ilm_t	*ilm;
	ilm_t	*ilm_next;
	ilm_t	*new_ilm;
	ilm_t	**ilmp;

	ASSERT(MUTEX_HELD(&to_ill->ill_lock));
	ASSERT(MUTEX_HELD(&from_ill->ill_lock));
	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	ilmp = &from_ill->ill_ilm;
	for (ilm = from_ill->ill_ilm; ilm != NULL; ilm = ilm_next) {
		ilm_next = ilm->ilm_next;

		if (ilm->ilm_flags & ILM_DELETED) {
			ilmp = &ilm->ilm_next;
			continue;
		}

		ASSERT(ilm->ilm_ipif != NULL);

		if (ilm->ilm_ipif != ipif) {
			ilmp = &ilm->ilm_next;
			continue;
		}

		if (V4_PART_OF_V6(ilm->ilm_v6addr) ==
		    htonl(INADDR_ALLHOSTS_GROUP)) {
			/*
			 * We joined this in ipif_multicast_up
			 * and we never did an ipif_multicast_down
			 * for IPv4. If nobody else from the userland
			 * has reference, we free the ilm, and later
			 * when this ipif comes up on the new ill,
			 * we will join this again.
			 */
			if (--ilm->ilm_refcnt == 0)
				goto delete_ilm;

			new_ilm = ilm_lookup_ipif(ipif,
			    V4_PART_OF_V6(ilm->ilm_v6addr));
			if (new_ilm != NULL) {
				new_ilm->ilm_refcnt += ilm->ilm_refcnt;
				/*
				 * We still need to deal with the from_ill.
				 */
				new_ilm->ilm_is_new = B_TRUE;
				new_ilm->ilm_fmode = MODE_IS_EXCLUDE;
				CLEAR_SLIST(new_ilm->ilm_filter);
				goto delete_ilm;
			}
			/*
			 * If we could not find one e.g. ipif is
			 * still down on to_ill, we add this ilm
			 * on ill_new to preserve the reference
			 * count.
			 */
		}
		/*
		 * When ipifs move, ilms always move with it
		 * to the NEW ill. Thus we should never be
		 * able to find ilm till we really move it here.
		 */
		ASSERT(ilm_lookup_ipif(ipif,
		    V4_PART_OF_V6(ilm->ilm_v6addr)) == NULL);

		if (from_ill->ill_ilm_walker_cnt != 0) {
			new_ilm = (ilm_t *)mi_zalloc(sizeof (ilm_t));
			if (new_ilm == NULL) {
				char buf[INET6_ADDRSTRLEN];
				ip0dbg(("ilm_move_v4: FAILBACK of IPv4"
				    " multicast address %s : "
				    "from %s to"
				    " %s failed : ENOMEM \n",
				    inet_ntop(AF_INET,
				    &ilm->ilm_v6addr, buf,
				    sizeof (buf)),
				    from_ill->ill_name,
				    to_ill->ill_name));

				ilmp = &ilm->ilm_next;
				continue;
			}
			*new_ilm = *ilm;
			/* We don't want new_ilm linked to ilm's filter list */
			new_ilm->ilm_filter = NULL;
		} else {
			/* Remove from the list */
			*ilmp = ilm->ilm_next;
			new_ilm = ilm;
		}

		/*
		 * If we have never joined this group on the to_ill
		 * make sure we tell the driver.
		 */
		if (ilm_lookup_ill_v6(to_ill, &new_ilm->ilm_v6addr,
		    ALL_ZONES) == NULL)
			new_ilm->ilm_notify_driver = B_TRUE;

		/* Add to the to_ill's list */
		new_ilm->ilm_next = to_ill->ill_ilm;
		to_ill->ill_ilm = new_ilm;
		new_ilm->ilm_is_new = B_TRUE;

		/*
		 * Revert multicast filter state to (EXCLUDE, NULL)
		 */
		new_ilm->ilm_fmode = MODE_IS_EXCLUDE;
		CLEAR_SLIST(new_ilm->ilm_filter);

		/*
		 * Delete only if we have allocated a new ilm.
		 */
		if (new_ilm != ilm) {
delete_ilm:
			if (from_ill->ill_ilm_walker_cnt == 0) {
				/* Remove from the list */
				*ilmp = ilm->ilm_next;
				ilm->ilm_next = NULL;
				FREE_SLIST(ilm->ilm_filter);
				FREE_SLIST(ilm->ilm_pendsrcs);
				FREE_SLIST(ilm->ilm_rtx.rtx_allow);
				FREE_SLIST(ilm->ilm_rtx.rtx_block);
				mi_free((char *)ilm);
			} else {
				ilm->ilm_flags |= ILM_DELETED;
				from_ill->ill_ilm_cleanup_reqd = 1;
				ilmp = &ilm->ilm_next;
			}
		}
	}
}

static uint_t
ipif_get_id(ill_t *ill, uint_t id)
{
	uint_t	unit;
	ipif_t	*tipif;
	boolean_t found = B_FALSE;

	/*
	 * During failback, we want to go back to the same id
	 * instead of the smallest id so that the original
	 * configuration is maintained. id is non-zero in that
	 * case.
	 */
	if (id != 0) {
		/*
		 * While failing back, if we still have an ipif with
		 * MAX_ADDRS_PER_IF, it means this will be replaced
		 * as soon as we return from this function. It was
		 * to set to MAX_ADDRS_PER_IF by the caller so that
		 * we can choose the smallest id. Thus we return zero
		 * in that case ignoring the hint.
		 */
		if (ill->ill_ipif->ipif_id == MAX_ADDRS_PER_IF)
			return (0);
		for (tipif = ill->ill_ipif; tipif != NULL;
		    tipif = tipif->ipif_next) {
			if (tipif->ipif_id == id) {
				found = B_TRUE;
				break;
			}
		}
		/*
		 * If somebody already plumbed another logical
		 * with the same id, we won't be able to find it.
		 */
		if (!found)
			return (id);
	}
	for (unit = 0; unit <= ip_addrs_per_if; unit++) {
		found = B_FALSE;
		for (tipif = ill->ill_ipif; tipif != NULL;
		    tipif = tipif->ipif_next) {
			if (tipif->ipif_id == unit) {
				found = B_TRUE;
				break;
			}
		}
		if (!found)
			break;
	}
	return (unit);
}

/* ARGSUSED */
static int
ipif_move(ipif_t *ipif, ill_t *to_ill, queue_t *q, mblk_t *mp,
    ipif_t **rep_ipif_ptr)
{
	ill_t	*from_ill;
	ipif_t	*rep_ipif;
	ipif_t	**ipifp;
	uint_t	unit;
	int err = 0;
	ipif_t	*to_ipif;
	struct iocblk	*iocp;
	boolean_t failback_cmd;
	boolean_t remove_ipif;
	int	rc;

	ASSERT(IAM_WRITER_ILL(to_ill));
	ASSERT(IAM_WRITER_IPIF(ipif));

	iocp = (struct iocblk *)mp->b_rptr;
	failback_cmd = (iocp->ioc_cmd == SIOCLIFFAILBACK);
	remove_ipif = B_FALSE;

	from_ill = ipif->ipif_ill;

	ASSERT(MUTEX_HELD(&to_ill->ill_lock));
	ASSERT(MUTEX_HELD(&from_ill->ill_lock));
	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	/*
	 * Don't move LINK LOCAL addresses as they are tied to
	 * physical interface.
	 */
	if (from_ill->ill_isv6 &&
	    IN6_IS_ADDR_LINKLOCAL(&ipif->ipif_v6lcl_addr)) {
		ipif->ipif_was_up = B_FALSE;
		IPIF_UNMARK_MOVING(ipif);
		return (0);
	}

	/*
	 * We set the ipif_id to maximum so that the search for
	 * ipif_id will pick the lowest number i.e 0 in the
	 * following 2 cases :
	 *
	 * 1) We have a replacement ipif at the head of to_ill.
	 *    We can't remove it yet as we can exceed ip_addrs_per_if
	 *    on to_ill and hence the MOVE might fail. We want to
	 *    remove it only if we could move the ipif. Thus, by
	 *    setting it to the MAX value, we make the search in
	 *    ipif_get_id return the zeroth id.
	 *
	 * 2) When DR pulls out the NIC and re-plumbs the interface,
	 *    we might just have a zero address plumbed on the ipif
	 *    with zero id in the case of IPv4. We remove that while
	 *    doing the failback. We want to remove it only if we
	 *    could move the ipif. Thus, by setting it to the MAX
	 *    value, we make the search in ipif_get_id return the
	 *    zeroth id.
	 *
	 * Both (1) and (2) are done only when when we are moving
	 * an ipif (either due to failover/failback) which originally
	 * belonged to this interface i.e the ipif_orig_ifindex is
	 * the same as to_ill's ifindex. This is needed so that
	 * FAILOVER from A -> B ( A failed) followed by FAILOVER
	 * from B -> A (B is being removed from the group) and
	 * FAILBACK from A -> B restores the original configuration.
	 * Without the check for orig_ifindex, the second FAILOVER
	 * could make the ipif belonging to B replace the A's zeroth
	 * ipif and the subsequent failback re-creating the replacement
	 * ipif again.
	 *
	 * NOTE : We created the replacement ipif when we did a
	 * FAILOVER (See below). We could check for FAILBACK and
	 * then look for replacement ipif to be removed. But we don't
	 * want to do that because we wan't to allow the possibility
	 * of a FAILOVER from A -> B (which creates the replacement ipif),
	 * followed by a *FAILOVER* from B -> A instead of a FAILBACK
	 * from B -> A.
	 */
	to_ipif = to_ill->ill_ipif;
	if ((to_ill->ill_phyint->phyint_ifindex ==
	    ipif->ipif_orig_ifindex) &&
	    IPIF_REPL_CHECK(to_ipif, failback_cmd)) {
		ASSERT(to_ipif->ipif_id == 0);
		remove_ipif = B_TRUE;
		to_ipif->ipif_id = MAX_ADDRS_PER_IF;
	}
	/*
	 * Find the lowest logical unit number on the to_ill.
	 * If we are failing back, try to get the original id
	 * rather than the lowest one so that the original
	 * configuration is maintained.
	 *
	 * XXX need a better scheme for this.
	 */
	if (failback_cmd) {
		unit = ipif_get_id(to_ill, ipif->ipif_orig_ipifid);
	} else {
		unit = ipif_get_id(to_ill, 0);
	}

	/* Reset back to zero in case we fail below */
	if (to_ipif->ipif_id == MAX_ADDRS_PER_IF)
		to_ipif->ipif_id = 0;

	if (unit == ip_addrs_per_if) {
		ipif->ipif_was_up = B_FALSE;
		IPIF_UNMARK_MOVING(ipif);
		return (EINVAL);
	}

	/*
	 * ipif is ready to move from "from_ill" to "to_ill".
	 *
	 * 1) If we are moving ipif with id zero, create a
	 *    replacement ipif for this ipif on from_ill. If this fails
	 *    fail the MOVE operation.
	 *
	 * 2) Remove the replacement ipif on to_ill if any.
	 *    We could remove the replacement ipif when we are moving
	 *    the ipif with id zero. But what if somebody already
	 *    unplumbed it ? Thus we always remove it if it is present.
	 *    We want to do it only if we are sure we are going to
	 *    move the ipif to to_ill which is why there are no
	 *    returns due to error till ipif is linked to to_ill.
	 *    Note that the first ipif that we failback will always
	 *    be zero if it is present.
	 */
	if (ipif->ipif_id == 0) {
		ipaddr_t inaddr_any = INADDR_ANY;

		rep_ipif = (ipif_t *)mi_alloc(sizeof (ipif_t), BPRI_MED);
		if (rep_ipif == NULL) {
			ipif->ipif_was_up = B_FALSE;
			IPIF_UNMARK_MOVING(ipif);
			return (ENOMEM);
		}
		*rep_ipif = ipif_zero;
		/*
		 * Before we put the ipif on the list, store the addresses
		 * as mapped addresses as some of the ioctls e.g SIOCGIFADDR
		 * assumes so. This logic is not any different from what
		 * ipif_allocate does.
		 */
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6lcl_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6src_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6subnet);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6net_mask);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6brd_addr);
		IN6_IPADDR_TO_V4MAPPED(inaddr_any,
		    &rep_ipif->ipif_v6pp_dst_addr);
		/*
		 * We mark IPIF_NOFAILOVER so that this can never
		 * move.
		 */
		rep_ipif->ipif_flags = ipif->ipif_flags | IPIF_NOFAILOVER;
		rep_ipif->ipif_flags &= ~IPIF_UP & ~IPIF_DUPLICATE;
		rep_ipif->ipif_replace_zero = B_TRUE;
		mutex_init(&rep_ipif->ipif_saved_ire_lock, NULL,
		    MUTEX_DEFAULT, NULL);
		rep_ipif->ipif_id = 0;
		rep_ipif->ipif_ire_type = ipif->ipif_ire_type;
		rep_ipif->ipif_ill = from_ill;
		rep_ipif->ipif_orig_ifindex =
		    from_ill->ill_phyint->phyint_ifindex;
		/* Insert at head */
		rep_ipif->ipif_next = from_ill->ill_ipif;
		from_ill->ill_ipif = rep_ipif;
		/*
		 * We don't really care to let apps know about
		 * this interface.
		 */
	}

	if (remove_ipif) {
		/*
		 * We set to a max value above for this case to get
		 * id zero. ASSERT that we did get one.
		 */
		ASSERT((to_ipif->ipif_id == 0) && (unit == 0));
		rep_ipif = to_ipif;
		to_ill->ill_ipif = rep_ipif->ipif_next;
		rep_ipif->ipif_next = NULL;
		/*
		 * If some apps scanned and find this interface,
		 * it is time to let them know, so that they can
		 * delete it.
		 */

		*rep_ipif_ptr = rep_ipif;
	}

	/* Get it out of the ILL interface list. */
	ipifp = &ipif->ipif_ill->ill_ipif;
	for (; *ipifp != NULL; ipifp = &ipifp[0]->ipif_next) {
		if (*ipifp == ipif) {
			*ipifp = ipif->ipif_next;
			break;
		}
	}

	/* Assign the new ill */
	ipif->ipif_ill = to_ill;
	ipif->ipif_id = unit;
	/* id has already been checked */
	rc = ipif_insert(ipif, B_FALSE, B_FALSE);
	ASSERT(rc == 0);
	/* Let SCTP update its list */
	sctp_move_ipif(ipif, from_ill, to_ill);
	/*
	 * Handle the failover and failback of ipif_t between
	 * ill_t that have differing maximum mtu values.
	 */
	if (ipif->ipif_mtu > to_ill->ill_max_mtu) {
		if (ipif->ipif_saved_mtu == 0) {
			/*
			 * As this ipif_t is moving to an ill_t
			 * that has a lower ill_max_mtu, its
			 * ipif_mtu needs to be saved so it can
			 * be restored during failback or during
			 * failover to an ill_t which has a
			 * higher ill_max_mtu.
			 */
			ipif->ipif_saved_mtu = ipif->ipif_mtu;
			ipif->ipif_mtu = to_ill->ill_max_mtu;
		} else {
			/*
			 * The ipif_t is, once again, moving to
			 * an ill_t that has a lower maximum mtu
			 * value.
			 */
			ipif->ipif_mtu = to_ill->ill_max_mtu;
		}
	} else if (ipif->ipif_mtu < to_ill->ill_max_mtu &&
	    ipif->ipif_saved_mtu != 0) {
		/*
		 * The mtu of this ipif_t had to be reduced
		 * during an earlier failover; this is an
		 * opportunity for it to be increased (either as
		 * part of another failover or a failback).
		 */
		if (ipif->ipif_saved_mtu <= to_ill->ill_max_mtu) {
			ipif->ipif_mtu = ipif->ipif_saved_mtu;
			ipif->ipif_saved_mtu = 0;
		} else {
			ipif->ipif_mtu = to_ill->ill_max_mtu;
		}
	}

	/*
	 * We preserve all the other fields of the ipif including
	 * ipif_saved_ire_mp. The routes that are saved here will
	 * be recreated on the new interface and back on the old
	 * interface when we move back.
	 */
	ASSERT(ipif->ipif_arp_del_mp == NULL);

	return (err);
}

static int
ipif_move_all(ill_t *from_ill, ill_t *to_ill, queue_t *q, mblk_t *mp,
    int ifindex, ipif_t **rep_ipif_ptr)
{
	ipif_t *mipif;
	ipif_t *ipif_next;
	int err;

	/*
	 * We don't really try to MOVE back things if some of the
	 * operations fail. The daemon will take care of moving again
	 * later on.
	 */
	for (mipif = from_ill->ill_ipif; mipif != NULL; mipif = ipif_next) {
		ipif_next = mipif->ipif_next;
		if (!(mipif->ipif_flags & IPIF_NOFAILOVER) &&
		    (ifindex == 0 || ifindex == mipif->ipif_orig_ifindex)) {

			err = ipif_move(mipif, to_ill, q, mp, rep_ipif_ptr);

			/*
			 * When the MOVE fails, it is the job of the
			 * application to take care of this properly
			 * i.e try again if it is ENOMEM.
			 */
			if (mipif->ipif_ill != from_ill) {
				/*
				 * ipif has moved.
				 *
				 * Move the multicast memberships associated
				 * with this ipif to the new ill. For IPv6, we
				 * do it once after all the ipifs are moved
				 * (in ill_move) as they are not associated
				 * with ipifs.
				 *
				 * We need to move the ilms as the ipif has
				 * already been moved to a new ill even
				 * in the case of errors. Neither
				 * ilm_free(ipif) will find the ilm
				 * when somebody unplumbs this ipif nor
				 * ilm_delete(ilm) will be able to find the
				 * ilm, if we don't move now.
				 */
				if (!from_ill->ill_isv6)
					ilm_move_v4(from_ill, to_ill, mipif);
			}

			if (err != 0)
				return (err);
		}
	}
	return (0);
}

static int
ill_move(ill_t *from_ill, ill_t *to_ill, queue_t *q, mblk_t *mp)
{
	int ifindex;
	int err;
	struct iocblk	*iocp;
	ipif_t	*ipif;
	ipif_t *rep_ipif_ptr = NULL;
	ipif_t	*from_ipif = NULL;
	boolean_t check_rep_if = B_FALSE;

	iocp = (struct iocblk *)mp->b_rptr;
	if (iocp->ioc_cmd == SIOCLIFFAILOVER) {
		/*
		 * Move everything pointing at from_ill to to_ill.
		 * We acheive this by passing in 0 as ifindex.
		 */
		ifindex = 0;
	} else {
		/*
		 * Move everything pointing at from_ill whose original
		 * ifindex of connp, ipif, ilm points at to_ill->ill_index.
		 * We acheive this by passing in ifindex rather than 0.
		 * Multicast vifs, ilgs move implicitly because ipifs move.
		 */
		ASSERT(iocp->ioc_cmd == SIOCLIFFAILBACK);
		ifindex = to_ill->ill_phyint->phyint_ifindex;
	}

	/*
	 * Determine if there is at least one ipif that would move from
	 * 'from_ill' to 'to_ill'. If so, it is possible that the replacement
	 * ipif (if it exists) on the to_ill would be consumed as a result of
	 * the move, in which case we need to quiesce the replacement ipif also.
	 */
	for (from_ipif = from_ill->ill_ipif; from_ipif != NULL;
	    from_ipif = from_ipif->ipif_next) {
		if (((ifindex == 0) ||
		    (ifindex == from_ipif->ipif_orig_ifindex)) &&
		    !(from_ipif->ipif_flags & IPIF_NOFAILOVER)) {
			check_rep_if = B_TRUE;
			break;
		}
	}


	ill_down_ipifs(from_ill, mp, ifindex, B_TRUE);

	GRAB_ILL_LOCKS(from_ill, to_ill);
	if ((ipif = ill_quiescent_to_move(from_ill)) != NULL) {
		(void) ipsq_pending_mp_add(NULL, ipif, q,
		    mp, ILL_MOVE_OK);
		RELEASE_ILL_LOCKS(from_ill, to_ill);
		return (EINPROGRESS);
	}

	/* Check if the replacement ipif is quiescent to delete */
	if (check_rep_if && IPIF_REPL_CHECK(to_ill->ill_ipif,
	    (iocp->ioc_cmd == SIOCLIFFAILBACK))) {
		to_ill->ill_ipif->ipif_state_flags |=
		    IPIF_MOVING | IPIF_CHANGING;
		if ((ipif = ill_quiescent_to_move(to_ill)) != NULL) {
			(void) ipsq_pending_mp_add(NULL, ipif, q,
			    mp, ILL_MOVE_OK);
			RELEASE_ILL_LOCKS(from_ill, to_ill);
			return (EINPROGRESS);
		}
	}
	RELEASE_ILL_LOCKS(from_ill, to_ill);

	ASSERT(!MUTEX_HELD(&to_ill->ill_lock));
	rw_enter(&ill_g_lock, RW_WRITER);
	GRAB_ILL_LOCKS(from_ill, to_ill);
	err = ipif_move_all(from_ill, to_ill, q, mp, ifindex, &rep_ipif_ptr);

	/* ilm_move is done inside ipif_move for IPv4 */
	if (err == 0 && from_ill->ill_isv6)
		ilm_move_v6(from_ill, to_ill, ifindex);

	RELEASE_ILL_LOCKS(from_ill, to_ill);
	rw_exit(&ill_g_lock);

	/*
	 * send rts messages and multicast messages.
	 */
	if (rep_ipif_ptr != NULL) {
		ip_rts_ifmsg(rep_ipif_ptr);
		ip_rts_newaddrmsg(RTM_DELETE, 0, rep_ipif_ptr);
		IPIF_TRACE_CLEANUP(rep_ipif_ptr);
		mi_free(rep_ipif_ptr);
	}

	conn_move_ill(from_ill, to_ill, ifindex);

	return (err);
}

/*
 * Used to extract arguments for FAILOVER/FAILBACK ioctls.
 * Also checks for the validity of the arguments.
 * Note: We are already exclusive inside the from group.
 * It is upto the caller to release refcnt on the to_ill's.
 */
static int
ip_extract_move_args(queue_t *q, mblk_t *mp, ill_t **ill_from_v4,
    ill_t **ill_from_v6, ill_t **ill_to_v4, ill_t **ill_to_v6)
{
	int dst_index;
	ipif_t *ipif_v4, *ipif_v6;
	struct lifreq *lifr;
	mblk_t *mp1;
	boolean_t exists;
	sin_t	*sin;
	int	err = 0;

	if ((mp1 = mp->b_cont) == NULL)
		return (EPROTO);

	if ((mp1 = mp1->b_cont) == NULL)
		return (EPROTO);

	lifr = (struct lifreq *)mp1->b_rptr;
	sin = (sin_t *)&lifr->lifr_addr;

	/*
	 * We operate on both IPv4 and IPv6. Thus, we don't allow IPv4/IPv6
	 * specific operations.
	 */
	if (sin->sin_family != AF_UNSPEC)
		return (EINVAL);

	/*
	 * Get ipif with id 0. We are writer on the from ill. So we can pass
	 * NULLs for the last 4 args and we know the lookup won't fail
	 * with EINPROGRESS.
	 */
	ipif_v4 = ipif_lookup_on_name(lifr->lifr_name,
	    mi_strlen(lifr->lifr_name), B_FALSE, &exists, B_FALSE,
	    ALL_ZONES, NULL, NULL, NULL, NULL);
	ipif_v6 = ipif_lookup_on_name(lifr->lifr_name,
	    mi_strlen(lifr->lifr_name), B_FALSE, &exists, B_TRUE,
	    ALL_ZONES, NULL, NULL, NULL, NULL);

	if (ipif_v4 == NULL && ipif_v6 == NULL)
		return (ENXIO);

	if (ipif_v4 != NULL) {
		ASSERT(ipif_v4->ipif_refcnt != 0);
		if (ipif_v4->ipif_id != 0) {
			err = EINVAL;
			goto done;
		}

		ASSERT(IAM_WRITER_IPIF(ipif_v4));
		*ill_from_v4 = ipif_v4->ipif_ill;
	}

	if (ipif_v6 != NULL) {
		ASSERT(ipif_v6->ipif_refcnt != 0);
		if (ipif_v6->ipif_id != 0) {
			err = EINVAL;
			goto done;
		}

		ASSERT(IAM_WRITER_IPIF(ipif_v6));
		*ill_from_v6 = ipif_v6->ipif_ill;
	}

	err = 0;
	dst_index = lifr->lifr_movetoindex;
	*ill_to_v4 = ill_lookup_on_ifindex(dst_index, B_FALSE,
	    q, mp, ip_process_ioctl, &err);
	if (err != 0) {
		/*
		 * There could be only v6.
		 */
		if (err != ENXIO)
			goto done;
		err = 0;
	}

	*ill_to_v6 = ill_lookup_on_ifindex(dst_index, B_TRUE,
	    q, mp, ip_process_ioctl, &err);
	if (err != 0) {
		if (err != ENXIO)
			goto done;
		if (*ill_to_v4 == NULL) {
			err = ENXIO;
			goto done;
		}
		err = 0;
	}

	/*
	 * If we have something to MOVE i.e "from" not NULL,
	 * "to" should be non-NULL.
	 */
	if ((*ill_from_v4 != NULL && *ill_to_v4 == NULL) ||
	    (*ill_from_v6 != NULL && *ill_to_v6 == NULL)) {
		err = EINVAL;
	}

done:
	if (ipif_v4 != NULL)
		ipif_refrele(ipif_v4);
	if (ipif_v6 != NULL)
		ipif_refrele(ipif_v6);
	return (err);
}

/*
 * FAILOVER and FAILBACK are modelled as MOVE operations.
 *
 * We don't check whether the MOVE is within the same group or
 * not, because this ioctl can be used as a generic mechanism
 * to failover from interface A to B, though things will function
 * only if they are really part of the same group. Moreover,
 * all ipifs may be down and hence temporarily out of the group.
 *
 * ipif's that need to be moved are first brought down; V4 ipifs are brought
 * down first and then V6.  For each we wait for the ipif's to become quiescent.
 * Bringing down the ipifs ensures that all ires pointing to these ipifs's
 * have been deleted and there are no active references. Once quiescent the
 * ipif's are moved and brought up on the new ill.
 *
 * Normally the source ill and destination ill belong to the same IPMP group
 * and hence the same ipsq_t. In the event they don't belong to the same
 * same group the two ipsq's are first merged into one ipsq - that of the
 * to_ill. The multicast memberships on the source and destination ill cannot
 * change during the move operation since multicast joins/leaves also have to
 * execute on the same ipsq and are hence serialized.
 */
/* ARGSUSED */
int
ip_sioctl_move(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	ill_t *ill_to_v4 = NULL;
	ill_t *ill_to_v6 = NULL;
	ill_t *ill_from_v4 = NULL;
	ill_t *ill_from_v6 = NULL;
	int err = 0;

	/*
	 * setup from and to ill's, we can get EINPROGRESS only for
	 * to_ill's.
	 */
	err = ip_extract_move_args(q, mp, &ill_from_v4, &ill_from_v6,
	    &ill_to_v4, &ill_to_v6);

	if (err != 0) {
		ip0dbg(("ip_sioctl_move: extract args failed\n"));
		goto done;
	}

	/*
	 * nothing to do.
	 */
	if ((ill_from_v4 != NULL) && (ill_from_v4 == ill_to_v4)) {
		goto done;
	}

	/*
	 * nothing to do.
	 */
	if ((ill_from_v6 != NULL) && (ill_from_v6 == ill_to_v6)) {
		goto done;
	}

	/*
	 * Mark the ill as changing.
	 * ILL_CHANGING flag is cleared when the ipif's are brought up
	 * in ill_up_ipifs in case of error they are cleared below.
	 */

	GRAB_ILL_LOCKS(ill_from_v4, ill_from_v6);
	if (ill_from_v4 != NULL)
		ill_from_v4->ill_state_flags |= ILL_CHANGING;
	if (ill_from_v6 != NULL)
		ill_from_v6->ill_state_flags |= ILL_CHANGING;
	RELEASE_ILL_LOCKS(ill_from_v4, ill_from_v6);

	/*
	 * Make sure that both src and dst are
	 * in the same syncq group. If not make it happen.
	 * We are not holding any locks because we are the writer
	 * on the from_ipsq and we will hold locks in ill_merge_groups
	 * to protect to_ipsq against changing.
	 */
	if (ill_from_v4 != NULL) {
		if (ill_from_v4->ill_phyint->phyint_ipsq !=
		    ill_to_v4->ill_phyint->phyint_ipsq) {
			err = ill_merge_groups(ill_from_v4, ill_to_v4,
			    NULL, mp, q);
			goto err_ret;

		}
		ASSERT(!MUTEX_HELD(&ill_to_v4->ill_lock));
	} else {

		if (ill_from_v6->ill_phyint->phyint_ipsq !=
		    ill_to_v6->ill_phyint->phyint_ipsq) {
			err = ill_merge_groups(ill_from_v6, ill_to_v6,
			    NULL, mp, q);
			goto err_ret;

		}
		ASSERT(!MUTEX_HELD(&ill_to_v6->ill_lock));
	}

	/*
	 * Now that the ipsq's have been merged and we are the writer
	 * lets mark to_ill as changing as well.
	 */

	GRAB_ILL_LOCKS(ill_to_v4, ill_to_v6);
	if (ill_to_v4 != NULL)
		ill_to_v4->ill_state_flags |= ILL_CHANGING;
	if (ill_to_v6 != NULL)
		ill_to_v6->ill_state_flags |= ILL_CHANGING;
	RELEASE_ILL_LOCKS(ill_to_v4, ill_to_v6);

	/*
	 * Its ok for us to proceed with the move even if
	 * ill_pending_mp is non null on one of the from ill's as the reply
	 * should not be looking at the ipif, it should only care about the
	 * ill itself.
	 */

	/*
	 * lets move ipv4 first.
	 */
	if (ill_from_v4 != NULL) {
		ASSERT(IAM_WRITER_ILL(ill_to_v4));
		ill_from_v4->ill_move_in_progress = B_TRUE;
		ill_to_v4->ill_move_in_progress = B_TRUE;
		ill_to_v4->ill_move_peer = ill_from_v4;
		ill_from_v4->ill_move_peer = ill_to_v4;
		err = ill_move(ill_from_v4, ill_to_v4, q, mp);
	}

	/*
	 * Now lets move ipv6.
	 */
	if (err == 0 && ill_from_v6 != NULL) {
		ASSERT(IAM_WRITER_ILL(ill_to_v6));
		ill_from_v6->ill_move_in_progress = B_TRUE;
		ill_to_v6->ill_move_in_progress = B_TRUE;
		ill_to_v6->ill_move_peer = ill_from_v6;
		ill_from_v6->ill_move_peer = ill_to_v6;
		err = ill_move(ill_from_v6, ill_to_v6, q, mp);
	}

err_ret:
	/*
	 * EINPROGRESS means we are waiting for the ipif's that need to be
	 * moved to become quiescent.
	 */
	if (err == EINPROGRESS) {
		goto done;
	}

	/*
	 * if err is set ill_up_ipifs will not be called
	 * lets clear the flags.
	 */

	GRAB_ILL_LOCKS(ill_to_v4, ill_to_v6);
	GRAB_ILL_LOCKS(ill_from_v4, ill_from_v6);
	/*
	 * Some of the clearing may be redundant. But it is simple
	 * not making any extra checks.
	 */
	if (ill_from_v6 != NULL) {
		ill_from_v6->ill_move_in_progress = B_FALSE;
		ill_from_v6->ill_move_peer = NULL;
		ill_from_v6->ill_state_flags &= ~ILL_CHANGING;
	}
	if (ill_from_v4 != NULL) {
		ill_from_v4->ill_move_in_progress = B_FALSE;
		ill_from_v4->ill_move_peer = NULL;
		ill_from_v4->ill_state_flags &= ~ILL_CHANGING;
	}
	if (ill_to_v6 != NULL) {
		ill_to_v6->ill_move_in_progress = B_FALSE;
		ill_to_v6->ill_move_peer = NULL;
		ill_to_v6->ill_state_flags &= ~ILL_CHANGING;
	}
	if (ill_to_v4 != NULL) {
		ill_to_v4->ill_move_in_progress = B_FALSE;
		ill_to_v4->ill_move_peer = NULL;
		ill_to_v4->ill_state_flags &= ~ILL_CHANGING;
	}

	/*
	 * Check for setting INACTIVE, if STANDBY is set and FAILED is not set.
	 * Do this always to maintain proper state i.e even in case of errors.
	 * As phyint_inactive looks at both v4 and v6 interfaces,
	 * we need not call on both v4 and v6 interfaces.
	 */
	if (ill_from_v4 != NULL) {
		if ((ill_from_v4->ill_phyint->phyint_flags &
		    (PHYI_STANDBY | PHYI_FAILED)) == PHYI_STANDBY) {
			phyint_inactive(ill_from_v4->ill_phyint);
		}
	} else if (ill_from_v6 != NULL) {
		if ((ill_from_v6->ill_phyint->phyint_flags &
		    (PHYI_STANDBY | PHYI_FAILED)) == PHYI_STANDBY) {
			phyint_inactive(ill_from_v6->ill_phyint);
		}
	}

	if (ill_to_v4 != NULL) {
		if (ill_to_v4->ill_phyint->phyint_flags & PHYI_INACTIVE) {
			ill_to_v4->ill_phyint->phyint_flags &= ~PHYI_INACTIVE;
		}
	} else if (ill_to_v6 != NULL) {
		if (ill_to_v6->ill_phyint->phyint_flags & PHYI_INACTIVE) {
			ill_to_v6->ill_phyint->phyint_flags &= ~PHYI_INACTIVE;
		}
	}

	RELEASE_ILL_LOCKS(ill_to_v4, ill_to_v6);
	RELEASE_ILL_LOCKS(ill_from_v4, ill_from_v6);

no_err:
	/*
	 * lets bring the interfaces up on the to_ill.
	 */
	if (err == 0) {
		err = ill_up_ipifs(ill_to_v4 == NULL ? ill_to_v6:ill_to_v4,
		    q, mp);
	}

	if (err == 0) {
		if (ill_from_v4 != NULL && ill_to_v4 != NULL)
			ilm_send_multicast_reqs(ill_from_v4, ill_to_v4);

		if (ill_from_v6 != NULL && ill_to_v6 != NULL)
			ilm_send_multicast_reqs(ill_from_v6, ill_to_v6);
	}
done:

	if (ill_to_v4 != NULL) {
		ill_refrele(ill_to_v4);
	}
	if (ill_to_v6 != NULL) {
		ill_refrele(ill_to_v6);
	}

	return (err);
}

static void
ill_dl_down(ill_t *ill)
{
	/*
	 * The ill is down; unbind but stay attached since we're still
	 * associated with a PPA.
	 */
	mblk_t	*mp = ill->ill_unbind_mp;

	ill->ill_unbind_mp = NULL;
	ip1dbg(("ill_dl_down(%s)\n", ill->ill_name));
	if (mp != NULL) {
		ip1dbg(("ill_dl_down: %s (%u) for %s\n",
		    dlpi_prim_str(*(int *)mp->b_rptr), *(int *)mp->b_rptr,
		    ill->ill_name));
		mutex_enter(&ill->ill_lock);
		ill->ill_state_flags |= ILL_DL_UNBIND_IN_PROGRESS;
		mutex_exit(&ill->ill_lock);
		ill_dlpi_send(ill, mp);
	}

	/*
	 * Toss all of our multicast memberships.  We could keep them, but
	 * then we'd have to do bookkeeping of any joins and leaves performed
	 * by the application while the the interface is down (we can't just
	 * issue them because arp cannot currently process AR_ENTRY_SQUERY's
	 * on a downed interface).
	 */
	ill_leave_multicast(ill);

	mutex_enter(&ill->ill_lock);
	ill->ill_dl_up = 0;
	mutex_exit(&ill->ill_lock);
}

void
ill_dlpi_dispatch(ill_t *ill, mblk_t *mp)
{
	union DL_primitives *dlp;
	t_uscalar_t prim;

	ASSERT(DB_TYPE(mp) == M_PROTO || DB_TYPE(mp) == M_PCPROTO);

	dlp = (union DL_primitives *)mp->b_rptr;
	prim = dlp->dl_primitive;

	ip1dbg(("ill_dlpi_dispatch: sending %s (%u) to %s\n",
		dlpi_prim_str(prim), prim, ill->ill_name));

	switch (prim) {
	case DL_PHYS_ADDR_REQ:
	{
		dl_phys_addr_req_t *dlpap = (dl_phys_addr_req_t *)mp->b_rptr;
		ill->ill_phys_addr_pend = dlpap->dl_addr_type;
		break;
	}
	case DL_BIND_REQ:
		mutex_enter(&ill->ill_lock);
		ill->ill_state_flags &= ~ILL_DL_UNBIND_IN_PROGRESS;
		mutex_exit(&ill->ill_lock);
		break;
	}

	ill->ill_dlpi_pending = prim;

	/*
	 * Some drivers send M_FLUSH up to IP as part of unbind
	 * request.  When this M_FLUSH is sent back to the driver,
	 * this can go after we send the detach request if the
	 * M_FLUSH ends up in IP's syncq. To avoid that, we reply
	 * to the M_FLUSH in ip_rput and locally generate another
	 * M_FLUSH for the correctness.  This will get freed in
	 * ip_wput_nondata.
	 */
	if (prim == DL_UNBIND_REQ)
		(void) putnextctl1(ill->ill_rq, M_FLUSH, FLUSHRW);

	putnext(ill->ill_wq, mp);
}

/*
 * Send a DLPI control message to the driver but make sure there
 * is only one outstanding message. Uses ill_dlpi_pending to tell
 * when it must queue. ip_rput_dlpi_writer calls ill_dlpi_done()
 * when an ACK or a NAK is received to process the next queued message.
 *
 * We don't protect ill_dlpi_pending with any lock. This is okay as
 * every place where its accessed, ip is exclusive while accessing
 * ill_dlpi_pending except when this function is called from ill_init()
 */
void
ill_dlpi_send(ill_t *ill, mblk_t *mp)
{
	mblk_t **mpp;

	ASSERT(IAM_WRITER_ILL(ill));
	ASSERT(DB_TYPE(mp) == M_PROTO || DB_TYPE(mp) == M_PCPROTO);

	if (ill->ill_dlpi_pending != DL_PRIM_INVAL) {
		/* Must queue message. Tail insertion */
		mpp = &ill->ill_dlpi_deferred;
		while (*mpp != NULL)
			mpp = &((*mpp)->b_next);

		ip1dbg(("ill_dlpi_send: deferring request for %s\n",
		    ill->ill_name));

		*mpp = mp;
		return;
	}

	ill_dlpi_dispatch(ill, mp);
}

/*
 * Called when an DLPI control message has been acked or nacked to
 * send down the next queued message (if any).
 */
void
ill_dlpi_done(ill_t *ill, t_uscalar_t prim)
{
	mblk_t *mp;

	ASSERT(IAM_WRITER_ILL(ill));

	ASSERT(prim != DL_PRIM_INVAL);
	if (ill->ill_dlpi_pending != prim) {
		if (ill->ill_dlpi_pending == DL_PRIM_INVAL) {
			(void) mi_strlog(ill->ill_rq, 1,
			    SL_CONSOLE|SL_ERROR|SL_TRACE,
			    "ill_dlpi_done: unsolicited ack for %s from %s\n",
			    dlpi_prim_str(prim), ill->ill_name);
		} else {
			(void) mi_strlog(ill->ill_rq, 1,
			    SL_CONSOLE|SL_ERROR|SL_TRACE,
			    "ill_dlpi_done: unexpected ack for %s from %s "
			    "(expecting ack for %s)\n",
			    dlpi_prim_str(prim), ill->ill_name,
			    dlpi_prim_str(ill->ill_dlpi_pending));
		}
		return;
	}

	ip1dbg(("ill_dlpi_done: %s has completed %s (%u)\n", ill->ill_name,
	    dlpi_prim_str(ill->ill_dlpi_pending), ill->ill_dlpi_pending));

	if ((mp = ill->ill_dlpi_deferred) == NULL) {
		ill->ill_dlpi_pending = DL_PRIM_INVAL;
		return;
	}

	ill->ill_dlpi_deferred = mp->b_next;
	mp->b_next = NULL;

	ill_dlpi_dispatch(ill, mp);
}

void
conn_delete_ire(conn_t *connp, caddr_t arg)
{
	ipif_t	*ipif = (ipif_t *)arg;
	ire_t	*ire;

	/*
	 * Look at the cached ires on conns which has pointers to ipifs.
	 * We just call ire_refrele which clears up the reference
	 * to ire. Called when a conn closes. Also called from ipif_free
	 * to cleanup indirect references to the stale ipif via the cached ire.
	 */
	mutex_enter(&connp->conn_lock);
	ire = connp->conn_ire_cache;
	if (ire != NULL && (ipif == NULL || ire->ire_ipif == ipif)) {
		connp->conn_ire_cache = NULL;
		mutex_exit(&connp->conn_lock);
		IRE_REFRELE_NOTR(ire);
		return;
	}
	mutex_exit(&connp->conn_lock);

}

/*
 * Some operations (illgrp_delete(), ipif_down()) conditionally delete a number
 * of IREs. Those IREs may have been previously cached in the conn structure.
 * This ipcl_walk() walker function releases all references to such IREs based
 * on the condemned flag.
 */
/* ARGSUSED */
void
conn_cleanup_stale_ire(conn_t *connp, caddr_t arg)
{
	ire_t	*ire;

	mutex_enter(&connp->conn_lock);
	ire = connp->conn_ire_cache;
	if (ire != NULL && (ire->ire_marks & IRE_MARK_CONDEMNED)) {
		connp->conn_ire_cache = NULL;
		mutex_exit(&connp->conn_lock);
		IRE_REFRELE_NOTR(ire);
		return;
	}
	mutex_exit(&connp->conn_lock);
}

/*
 * Take down a specific interface, but don't lose any information about it.
 * Also delete interface from its interface group (ifgrp).
 * (Always called as writer.)
 * This function goes through the down sequence even if the interface is
 * already down. There are 2 reasons.
 * a. Currently we permit interface routes that depend on down interfaces
 *    to be added. This behaviour itself is questionable. However it appears
 *    that both Solaris and 4.3 BSD have exhibited this behaviour for a long
 *    time. We go thru the cleanup in order to remove these routes.
 * b. The bringup of the interface could fail in ill_dl_up i.e. we get
 *    DL_ERROR_ACK in response to the the DL_BIND request. The interface is
 *    down, but we need to cleanup i.e. do ill_dl_down and
 *    ip_rput_dlpi_writer (DL_ERROR_ACK) -> ipif_down.
 *
 * IP-MT notes:
 *
 * Model of reference to interfaces.
 *
 * The following members in ipif_t track references to the ipif.
 *	int     ipif_refcnt;    Active reference count
 *	uint_t  ipif_ire_cnt;   Number of ire's referencing this ipif
 * The following members in ill_t track references to the ill.
 *	int             ill_refcnt;     active refcnt
 *	uint_t          ill_ire_cnt;	Number of ires referencing ill
 *	uint_t          ill_nce_cnt;	Number of nces referencing ill
 *
 * Reference to an ipif or ill can be obtained in any of the following ways.
 *
 * Through the lookup functions ipif_lookup_* / ill_lookup_* functions
 * Pointers to ipif / ill from other data structures viz ire and conn.
 * Implicit reference to the ipif / ill by holding a reference to the ire.
 *
 * The ipif/ill lookup functions return a reference held ipif / ill.
 * ipif_refcnt and ill_refcnt track the reference counts respectively.
 * This is a purely dynamic reference count associated with threads holding
 * references to the ipif / ill. Pointers from other structures do not
 * count towards this reference count.
 *
 * ipif_ire_cnt/ill_ire_cnt is the number of ire's associated with the
 * ipif/ill. This is incremented whenever a new ire is created referencing the
 * ipif/ill. This is done atomically inside ire_add_v[46] where the ire is
 * actually added to the ire hash table. The count is decremented in
 * ire_inactive where the ire is destroyed.
 *
 * nce's reference ill's thru nce_ill and the count of nce's associated with
 * an ill is recorded in ill_nce_cnt. This is incremented atomically in
 * ndp_add() where the nce is actually added to the table. Similarly it is
 * decremented in ndp_inactive where the nce is destroyed.
 *
 * Flow of ioctls involving interface down/up
 *
 * The following is the sequence of an attempt to set some critical flags on an
 * up interface.
 * ip_sioctl_flags
 * ipif_down
 * wait for ipif to be quiescent
 * ipif_down_tail
 * ip_sioctl_flags_tail
 *
 * All set ioctls that involve down/up sequence would have a skeleton similar
 * to the above. All the *tail functions are called after the refcounts have
 * dropped to the appropriate values.
 *
 * The mechanism to quiesce an ipif is as follows.
 *
 * Mark the ipif as IPIF_CHANGING. No more lookups will be allowed
 * on the ipif. Callers either pass a flag requesting wait or the lookup
 *  functions will return NULL.
 *
 * Delete all ires referencing this ipif
 *
 * Any thread attempting to do an ipif_refhold on an ipif that has been
 * obtained thru a cached pointer will first make sure that
 * the ipif can be refheld using the macro IPIF_CAN_LOOKUP and only then
 * increment the refcount.
 *
 * The above guarantees that the ipif refcount will eventually come down to
 * zero and the ipif will quiesce, once all threads that currently hold a
 * reference to the ipif refrelease the ipif. The ipif is quiescent after the
 * ipif_refcount has dropped to zero and all ire's associated with this ipif
 * have also been ire_inactive'd. i.e. when ipif_ire_cnt and ipif_refcnt both
 * drop to zero.
 *
 * Lookups during the IPIF_CHANGING/ILL_CHANGING interval.
 *
 * Threads trying to lookup an ipif or ill can pass a flag requesting
 * wait and restart if the ipif / ill cannot be looked up currently.
 * For eg. bind, and route operations (Eg. route add / delete) cannot return
 * failure if the ipif is currently undergoing an exclusive operation, and
 * hence pass the flag. The mblk is then enqueued in the ipsq and the operation
 * is restarted by ipsq_exit() when the currently exclusive ioctl completes.
 * The lookup and enqueue is atomic using the ill_lock and ipsq_lock. The
 * lookup is done holding the ill_lock. Hence the ill/ipif state flags can't
 * change while the ill_lock is held. Before dropping the ill_lock we acquire
 * the ipsq_lock and call ipsq_enq. This ensures that ipsq_exit can't finish
 * until we release the ipsq_lock, even though the the ill/ipif state flags
 * can change after we drop the ill_lock.
 *
 * An attempt to send out a packet using an ipif that is currently
 * IPIF_CHANGING will fail. No attempt is made in this case to enqueue this
 * operation and restart it later when the exclusive condition on the ipif ends.
 * This is an example of not passing the wait flag to the lookup functions. For
 * example an attempt to refhold and use conn->conn_multicast_ipif and send
 * out a multicast packet on that ipif will fail while the ipif is
 * IPIF_CHANGING. An attempt to create an IRE_CACHE using an ipif that is
 * currently IPIF_CHANGING will also fail.
 */
int
ipif_down(ipif_t *ipif, queue_t *q, mblk_t *mp)
{
	ill_t		*ill = ipif->ipif_ill;
	phyint_t	*phyi;
	conn_t		*connp;
	boolean_t	success;
	boolean_t	ipif_was_up = B_FALSE;

	ASSERT(IAM_WRITER_IPIF(ipif));

	ip1dbg(("ipif_down(%s:%u)\n", ill->ill_name, ipif->ipif_id));

	if (ipif->ipif_flags & IPIF_UP) {
		mutex_enter(&ill->ill_lock);
		ipif->ipif_flags &= ~IPIF_UP;
		ASSERT(ill->ill_ipif_up_count > 0);
		--ill->ill_ipif_up_count;
		mutex_exit(&ill->ill_lock);
		ipif_was_up = B_TRUE;
		/* Update status in SCTP's list */
		sctp_update_ipif(ipif, SCTP_IPIF_DOWN);
	}

	/*
	 * Blow away v6 memberships we established in ipif_multicast_up(); the
	 * v4 ones are left alone (as is the ipif_multicast_up flag, so we
	 * know not to rejoin when the interface is brought back up).
	 */
	if (ipif->ipif_isv6)
		ipif_multicast_down(ipif);
	/*
	 * Remove from the mapping for __sin6_src_id. We insert only
	 * when the address is not INADDR_ANY. As IPv4 addresses are
	 * stored as mapped addresses, we need to check for mapped
	 * INADDR_ANY also.
	 */
	if (ipif_was_up && !IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr) &&
	    !IN6_IS_ADDR_V4MAPPED_ANY(&ipif->ipif_v6lcl_addr) &&
	    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
		int err;

		err = ip_srcid_remove(&ipif->ipif_v6lcl_addr,
		    ipif->ipif_zoneid);
		if (err != 0) {
			ip0dbg(("ipif_down: srcid_remove %d\n", err));
		}
	}

	/*
	 * Before we delete the ill from the group (if any), we need
	 * to make sure that we delete all the routes dependent on
	 * this and also any ipifs dependent on this ipif for
	 * source address. We need to do before we delete from
	 * the group because
	 *
	 * 1) ipif_down_delete_ire de-references ill->ill_group.
	 *
	 * 2) ipif_update_other_ipifs needs to walk the whole group
	 *    for re-doing source address selection. Note that
	 *    ipif_select_source[_v6] called from
	 *    ipif_update_other_ipifs[_v6] will not pick this ipif
	 *    because we have already marked down here i.e cleared
	 *    IPIF_UP.
	 */
	if (ipif->ipif_isv6)
		ire_walk_v6(ipif_down_delete_ire, (char *)ipif, ALL_ZONES);
	else
		ire_walk_v4(ipif_down_delete_ire, (char *)ipif, ALL_ZONES);

	/*
	 * Need to add these also to be saved and restored when the
	 * ipif is brought down and up
	 */
	mutex_enter(&ire_mrtun_lock);
	if (ire_mrtun_count != 0) {
		mutex_exit(&ire_mrtun_lock);
		ire_walk_ill_mrtun(0, 0, ipif_down_delete_ire,
		    (char *)ipif, NULL);
	} else {
		mutex_exit(&ire_mrtun_lock);
	}

	mutex_enter(&ire_srcif_table_lock);
	if (ire_srcif_table_count > 0) {
		mutex_exit(&ire_srcif_table_lock);
		ire_walk_srcif_table_v4(ipif_down_delete_ire, (char *)ipif);
	} else {
		mutex_exit(&ire_srcif_table_lock);
	}

	/*
	 * Cleaning up the conn_ire_cache or conns must be done only after the
	 * ires have been deleted above. Otherwise a thread could end up
	 * caching an ire in a conn after we have finished the cleanup of the
	 * conn. The caching is done after making sure that the ire is not yet
	 * condemned. Also documented in the block comment above ip_output
	 */
	ipcl_walk(conn_cleanup_stale_ire, NULL);
	/* Also, delete the ires cached in SCTP */
	sctp_ire_cache_flush(ipif);

	/* Resolve any IPsec/IKE NAT-T instances that depend on this ipif. */
	nattymod_clean_ipif(ipif);

	/*
	 * Update any other ipifs which have used "our" local address as
	 * a source address. This entails removing and recreating IRE_INTERFACE
	 * entries for such ipifs.
	 */
	if (ipif->ipif_isv6)
		ipif_update_other_ipifs_v6(ipif, ill->ill_group);
	else
		ipif_update_other_ipifs(ipif, ill->ill_group);

	if (ipif_was_up) {
		/*
		 * Check whether it is last ipif to leave this group.
		 * If this is the last ipif to leave, we should remove
		 * this ill from the group as ipif_select_source will not
		 * be able to find any useful ipifs if this ill is selected
		 * for load balancing.
		 *
		 * For nameless groups, we should call ifgrp_delete if this
		 * belongs to some group. As this ipif is going down, we may
		 * need to reconstruct groups.
		 */
		phyi = ill->ill_phyint;
		/*
		 * If the phyint_groupname_len is 0, it may or may not
		 * be in the nameless group. If the phyint_groupname_len is
		 * not 0, then this ill should be part of some group.
		 * As we always insert this ill in the group if
		 * phyint_groupname_len is not zero when the first ipif
		 * comes up (in ipif_up_done), it should be in a group
		 * when the namelen is not 0.
		 *
		 * NOTE : When we delete the ill from the group,it will
		 * blow away all the IRE_CACHES pointing either at this ipif or
		 * ill_wq (illgrp_cache_delete does this). Thus, no IRES
		 * should be pointing at this ill.
		 */
		ASSERT(phyi->phyint_groupname_len == 0 ||
		    (phyi->phyint_groupname != NULL && ill->ill_group != NULL));

		if (phyi->phyint_groupname_len != 0) {
			if (ill->ill_ipif_up_count == 0)
				illgrp_delete(ill);
		}

		/*
		 * If we have deleted some of the broadcast ires associated
		 * with this ipif, we need to re-nominate somebody else if
		 * the ires that we deleted were the nominated ones.
		 */
		if (ill->ill_group != NULL && !ill->ill_isv6)
			ipif_renominate_bcast(ipif);
	}

	/*
	 * neighbor-discovery or arp entries for this interface.
	 */
	ipif_ndp_down(ipif);

	/*
	 * If mp is NULL the caller will wait for the appropriate refcnt.
	 * Eg. ip_sioctl_removeif -> ipif_free  -> ipif_down
	 * and ill_delete -> ipif_free -> ipif_down
	 */
	if (mp == NULL) {
		ASSERT(q == NULL);
		return (0);
	}

	if (CONN_Q(q)) {
		connp = Q_TO_CONN(q);
		mutex_enter(&connp->conn_lock);
	} else {
		connp = NULL;
	}
	mutex_enter(&ill->ill_lock);
	/*
	 * Are there any ire's pointing to this ipif that are still active ?
	 * If this is the last ipif going down, are there any ire's pointing
	 * to this ill that are still active ?
	 */
	if (ipif_is_quiescent(ipif)) {
		mutex_exit(&ill->ill_lock);
		if (connp != NULL)
			mutex_exit(&connp->conn_lock);
		return (0);
	}

	ip1dbg(("ipif_down: need to wait, adding pending mp %s ill %p",
	    ill->ill_name, (void *)ill));
	/*
	 * Enqueue the mp atomically in ipsq_pending_mp. When the refcount
	 * drops down, the operation will be restarted by ipif_ill_refrele_tail
	 * which in turn is called by the last refrele on the ipif/ill/ire.
	 */
	success = ipsq_pending_mp_add(connp, ipif, q, mp, IPIF_DOWN);
	if (!success) {
		/* The conn is closing. So just return */
		ASSERT(connp != NULL);
		mutex_exit(&ill->ill_lock);
		mutex_exit(&connp->conn_lock);
		return (EINTR);
	}

	mutex_exit(&ill->ill_lock);
	if (connp != NULL)
		mutex_exit(&connp->conn_lock);
	return (EINPROGRESS);
}

void
ipif_down_tail(ipif_t *ipif)
{
	ill_t	*ill = ipif->ipif_ill;

	/*
	 * Skip any loopback interface (null wq).
	 * If this is the last logical interface on the ill
	 * have ill_dl_down tell the driver we are gone (unbind)
	 * Note that lun 0 can ipif_down even though
	 * there are other logical units that are up.
	 * This occurs e.g. when we change a "significant" IFF_ flag.
	 */
	if (ill->ill_wq != NULL && !ill->ill_logical_down &&
	    ill->ill_ipif_up_count == 0 && ill->ill_ipif_dup_count == 0 &&
	    ill->ill_dl_up) {
		ill_dl_down(ill);
	}
	ill->ill_logical_down = 0;

	/*
	 * Have to be after removing the routes in ipif_down_delete_ire.
	 */
	if (ipif->ipif_isv6) {
		if (ill->ill_flags & ILLF_XRESOLV)
			ipif_arp_down(ipif);
	} else {
		ipif_arp_down(ipif);
	}

	ip_rts_ifmsg(ipif);
	ip_rts_newaddrmsg(RTM_DELETE, 0, ipif);
}

/*
 * Bring interface logically down without bringing the physical interface
 * down e.g. when the netmask is changed. This avoids long lasting link
 * negotiations between an ethernet interface and a certain switches.
 */
static int
ipif_logical_down(ipif_t *ipif, queue_t *q, mblk_t *mp)
{
	/*
	 * The ill_logical_down flag is a transient flag. It is set here
	 * and is cleared once the down has completed in ipif_down_tail.
	 * This flag does not indicate whether the ill stream is in the
	 * DL_BOUND state with the driver. Instead this flag is used by
	 * ipif_down_tail to determine whether to DL_UNBIND the stream with
	 * the driver. The state of the ill stream i.e. whether it is
	 * DL_BOUND with the driver or not is indicated by the ill_dl_up flag.
	 */
	ipif->ipif_ill->ill_logical_down = 1;
	return (ipif_down(ipif, q, mp));
}

/*
 * This is called when the SIOCSLIFUSESRC ioctl is processed in IP.
 * If the usesrc client ILL is already part of a usesrc group or not,
 * in either case a ire_stq with the matching usesrc client ILL will
 * locate the IRE's that need to be deleted. We want IREs to be created
 * with the new source address.
 */
static void
ipif_delete_cache_ire(ire_t *ire, char *ill_arg)
{
	ill_t	*ucill = (ill_t *)ill_arg;

	ASSERT(IAM_WRITER_ILL(ucill));

	if (ire->ire_stq == NULL)
		return;

	if ((ire->ire_type == IRE_CACHE) &&
	    ((ill_t *)ire->ire_stq->q_ptr == ucill))
		ire_delete(ire);
}

/*
 * ire_walk routine to delete every IRE dependent on the interface
 * address that is going down.	(Always called as writer.)
 * Works for both v4 and v6.
 * In addition for checking for ire_ipif matches it also checks for
 * IRE_CACHE entries which have the same source address as the
 * disappearing ipif since ipif_select_source might have picked
 * that source. Note that ipif_down/ipif_update_other_ipifs takes
 * care of any IRE_INTERFACE with the disappearing source address.
 */
static void
ipif_down_delete_ire(ire_t *ire, char *ipif_arg)
{
	ipif_t	*ipif = (ipif_t *)ipif_arg;
	ill_t *ire_ill;
	ill_t *ipif_ill;

	ASSERT(IAM_WRITER_IPIF(ipif));
	if (ire->ire_ipif == NULL)
		return;

	/*
	 * For IPv4, we derive source addresses for an IRE from ipif's
	 * belonging to the same IPMP group as the IRE's outgoing
	 * interface.  If an IRE's outgoing interface isn't in the
	 * same IPMP group as a particular ipif, then that ipif
	 * couldn't have been used as a source address for this IRE.
	 *
	 * For IPv6, source addresses are only restricted to the IPMP group
	 * if the IRE is for a link-local address or a multicast address.
	 * Otherwise, source addresses for an IRE can be chosen from
	 * interfaces other than the the outgoing interface for that IRE.
	 *
	 * For source address selection details, see ipif_select_source()
	 * and ipif_select_source_v6().
	 */
	if (ire->ire_ipversion == IPV4_VERSION ||
	    IN6_IS_ADDR_LINKLOCAL(&ire->ire_addr_v6) ||
	    IN6_IS_ADDR_MULTICAST(&ire->ire_addr_v6)) {
		ire_ill = ire->ire_ipif->ipif_ill;
		ipif_ill = ipif->ipif_ill;

		if (ire_ill->ill_group != ipif_ill->ill_group) {
			return;
		}
	}


	if (ire->ire_ipif != ipif) {
		/*
		 * Look for a matching source address.
		 */
		if (ire->ire_type != IRE_CACHE)
			return;
		if (ipif->ipif_flags & IPIF_NOLOCAL)
			return;

		if (ire->ire_ipversion == IPV4_VERSION) {
			if (ire->ire_src_addr != ipif->ipif_src_addr)
				return;
		} else {
			if (!IN6_ARE_ADDR_EQUAL(&ire->ire_src_addr_v6,
			    &ipif->ipif_v6lcl_addr))
				return;
		}
		ire_delete(ire);
		return;
	}
	/*
	 * ire_delete() will do an ire_flush_cache which will delete
	 * all ire_ipif matches
	 */
	ire_delete(ire);
}

/*
 * ire_walk_ill function for deleting all IRE_CACHE entries for an ill when
 * 1) an ipif (on that ill) changes the IPIF_DEPRECATED flags, or
 * 2) when an interface is brought up or down (on that ill).
 * This ensures that the IRE_CACHE entries don't retain stale source
 * address selection results.
 */
void
ill_ipif_cache_delete(ire_t *ire, char *ill_arg)
{
	ill_t	*ill = (ill_t *)ill_arg;
	ill_t	*ipif_ill;

	ASSERT(IAM_WRITER_ILL(ill));
	/*
	 * We use MATCH_IRE_TYPE/IRE_CACHE while calling ire_walk_ill_v4.
	 * Hence this should be IRE_CACHE.
	 */
	ASSERT(ire->ire_type == IRE_CACHE);

	/*
	 * We are called for IRE_CACHES whose ire_ipif matches ill.
	 * We are only interested in IRE_CACHES that has borrowed
	 * the source address from ill_arg e.g. ipif_up_done[_v6]
	 * for which we need to look at ire_ipif->ipif_ill match
	 * with ill.
	 */
	ASSERT(ire->ire_ipif != NULL);
	ipif_ill = ire->ire_ipif->ipif_ill;
	if (ipif_ill == ill || (ill->ill_group != NULL &&
	    ipif_ill->ill_group == ill->ill_group)) {
		ire_delete(ire);
	}
}

/*
 * Delete all the ire whose stq references ill_arg.
 */
static void
ill_stq_cache_delete(ire_t *ire, char *ill_arg)
{
	ill_t	*ill = (ill_t *)ill_arg;
	ill_t	*ire_ill;

	ASSERT(IAM_WRITER_ILL(ill));
	/*
	 * We use MATCH_IRE_TYPE/IRE_CACHE while calling ire_walk_ill_v4.
	 * Hence this should be IRE_CACHE.
	 */
	ASSERT(ire->ire_type == IRE_CACHE);

	/*
	 * We are called for IRE_CACHES whose ire_stq and ire_ipif
	 * matches ill. We are only interested in IRE_CACHES that
	 * has ire_stq->q_ptr pointing at ill_arg. Thus we do the
	 * filtering here.
	 */
	ire_ill = (ill_t *)ire->ire_stq->q_ptr;

	if (ire_ill == ill)
		ire_delete(ire);
}

/*
 * This is called when an ill leaves the group. We want to delete
 * all IRE_CACHES whose stq is pointing at ill_wq or ire_ipif is
 * pointing at ill.
 */
static void
illgrp_cache_delete(ire_t *ire, char *ill_arg)
{
	ill_t	*ill = (ill_t *)ill_arg;

	ASSERT(IAM_WRITER_ILL(ill));
	ASSERT(ill->ill_group == NULL);
	/*
	 * We use MATCH_IRE_TYPE/IRE_CACHE while calling ire_walk_ill_v4.
	 * Hence this should be IRE_CACHE.
	 */
	ASSERT(ire->ire_type == IRE_CACHE);
	/*
	 * We are called for IRE_CACHES whose ire_stq and ire_ipif
	 * matches ill. We are interested in both.
	 */
	ASSERT((ill == (ill_t *)ire->ire_stq->q_ptr) ||
	    (ire->ire_ipif->ipif_ill == ill));

	ire_delete(ire);
}

/*
 * Initiate deallocate of an IPIF. Always called as writer. Called by
 * ill_delete or ip_sioctl_removeif.
 */
static void
ipif_free(ipif_t *ipif)
{
	ASSERT(IAM_WRITER_IPIF(ipif));

	if (ipif->ipif_recovery_id != 0)
		(void) untimeout(ipif->ipif_recovery_id);
	ipif->ipif_recovery_id = 0;

	/* Remove conn references */
	reset_conn_ipif(ipif);

	/*
	 * Make sure we have valid net and subnet broadcast ire's for the
	 * other ipif's which share them with this ipif.
	 */
	if (!ipif->ipif_isv6)
		ipif_check_bcast_ires(ipif);

	/*
	 * Take down the interface. We can be called either from ill_delete
	 * or from ip_sioctl_removeif.
	 */
	(void) ipif_down(ipif, NULL, NULL);

	rw_enter(&ill_g_lock, RW_WRITER);
	/* Remove pointers to this ill in the multicast routing tables */
	reset_mrt_vif_ipif(ipif);
	rw_exit(&ill_g_lock);
}

static void
ipif_free_tail(ipif_t *ipif)
{
	mblk_t	*mp;
	ipif_t	**ipifp;

	/*
	 * Free state for addition IRE_IF_[NO]RESOLVER ire's.
	 */
	mutex_enter(&ipif->ipif_saved_ire_lock);
	mp = ipif->ipif_saved_ire_mp;
	ipif->ipif_saved_ire_mp = NULL;
	mutex_exit(&ipif->ipif_saved_ire_lock);
	freemsg(mp);

	/*
	 * Need to hold both ill_g_lock and ill_lock while
	 * inserting or removing an ipif from the linked list
	 * of ipifs hanging off the ill.
	 */
	rw_enter(&ill_g_lock, RW_WRITER);
	/*
	 * Remove all multicast memberships on the interface now.
	 * This removes IPv4 multicast memberships joined within
	 * the kernel as ipif_down does not do ipif_multicast_down
	 * for IPv4. IPv6 is not handled here as the multicast memberships
	 * are based on ill and not on ipif.
	 */
	ilm_free(ipif);

	/*
	 * Since we held the ill_g_lock while doing the ilm_free above,
	 * we can assert the ilms were really deleted and not just marked
	 * ILM_DELETED.
	 */
	ASSERT(ilm_walk_ipif(ipif) == 0);


	IPIF_TRACE_CLEANUP(ipif);

	/* Ask SCTP to take it out of it list */
	sctp_update_ipif(ipif, SCTP_IPIF_REMOVE);

	mutex_enter(&ipif->ipif_ill->ill_lock);
	/* Get it out of the ILL interface list. */
	ipifp = &ipif->ipif_ill->ill_ipif;
	for (; *ipifp != NULL; ipifp = &ipifp[0]->ipif_next) {
		if (*ipifp == ipif) {
			*ipifp = ipif->ipif_next;
			break;
		}
	}

	mutex_exit(&ipif->ipif_ill->ill_lock);
	rw_exit(&ill_g_lock);

	mutex_destroy(&ipif->ipif_saved_ire_lock);

	ASSERT(!(ipif->ipif_flags & (IPIF_UP | IPIF_DUPLICATE)));

	/* Free the memory. */
	mi_free((char *)ipif);
}

/*
 * Returns an ipif name in the form "ill_name/unit" if ipif_id is not zero,
 * "ill_name" otherwise.
 */
char *
ipif_get_name(const ipif_t *ipif, char *buf, int len)
{
	char	lbuf[32];
	char	*name;
	size_t	name_len;

	buf[0] = '\0';
	if (!ipif)
		return (buf);
	name = ipif->ipif_ill->ill_name;
	name_len = ipif->ipif_ill->ill_name_length;
	if (ipif->ipif_id != 0) {
		(void) sprintf(lbuf, "%s%c%d", name, IPIF_SEPARATOR_CHAR,
		    ipif->ipif_id);
		name = lbuf;
		name_len = mi_strlen(name) + 1;
	}
	len -= 1;
	buf[len] = '\0';
	len = MIN(len, name_len);
	bcopy(name, buf, len);
	return (buf);
}

/*
 * Find an IPIF based on the name passed in.  Names can be of the
 * form <phys> (e.g., le0), <phys>:<#> (e.g., le0:1),
 * The <phys> string can have forms like <dev><#> (e.g., le0),
 * <dev><#>.<module> (e.g. le0.foo), or <dev>.<module><#> (e.g. ip.tun3).
 * When there is no colon, the implied unit id is zero. <phys> must
 * correspond to the name of an ILL.  (May be called as writer.)
 */
static ipif_t *
ipif_lookup_on_name(char *name, size_t namelen, boolean_t do_alloc,
    boolean_t *exists, boolean_t isv6, zoneid_t zoneid, queue_t *q,
    mblk_t *mp, ipsq_func_t func, int *error)
{
	char	*cp;
	char	*endp;
	long	id;
	ill_t	*ill;
	ipif_t	*ipif;
	uint_t	ire_type;
	boolean_t did_alloc = B_FALSE;
	ipsq_t	*ipsq;

	if (error != NULL)
		*error = 0;

	/*
	 * If the caller wants to us to create the ipif, make sure we have a
	 * valid zoneid
	 */
	ASSERT(!do_alloc || zoneid != ALL_ZONES);

	if (namelen == 0) {
		if (error != NULL)
			*error = ENXIO;
		return (NULL);
	}

	*exists = B_FALSE;
	/* Look for a colon in the name. */
	endp = &name[namelen];
	for (cp = endp; --cp > name; ) {
		if (*cp == IPIF_SEPARATOR_CHAR)
			break;
	}

	if (*cp == IPIF_SEPARATOR_CHAR) {
		/*
		 * Reject any non-decimal aliases for logical
		 * interfaces. Aliases with leading zeroes
		 * are also rejected as they introduce ambiguity
		 * in the naming of the interfaces.
		 * In order to confirm with existing semantics,
		 * and to not break any programs/script relying
		 * on that behaviour, if<0>:0 is considered to be
		 * a valid interface.
		 *
		 * If alias has two or more digits and the first
		 * is zero, fail.
		 */
		if (&cp[2] < endp && cp[1] == '0')
			return (NULL);
	}

	if (cp <= name) {
		cp = endp;
	} else {
		*cp = '\0';
	}

	/*
	 * Look up the ILL, based on the portion of the name
	 * before the slash. ill_lookup_on_name returns a held ill.
	 * Temporary to check whether ill exists already. If so
	 * ill_lookup_on_name will clear it.
	 */
	ill = ill_lookup_on_name(name, do_alloc, isv6,
	    q, mp, func, error, &did_alloc);
	if (cp != endp)
		*cp = IPIF_SEPARATOR_CHAR;
	if (ill == NULL)
		return (NULL);

	/* Establish the unit number in the name. */
	id = 0;
	if (cp < endp && *endp == '\0') {
		/* If there was a colon, the unit number follows. */
		cp++;
		if (ddi_strtol(cp, NULL, 0, &id) != 0) {
			ill_refrele(ill);
			if (error != NULL)
				*error = ENXIO;
			return (NULL);
		}
	}

	GRAB_CONN_LOCK(q);
	mutex_enter(&ill->ill_lock);
	/* Now see if there is an IPIF with this unit number. */
	for (ipif = ill->ill_ipif; ipif; ipif = ipif->ipif_next) {
		if (ipif->ipif_id == id) {
			if (zoneid != ALL_ZONES &&
			    zoneid != ipif->ipif_zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES) {
				mutex_exit(&ill->ill_lock);
				RELEASE_CONN_LOCK(q);
				ill_refrele(ill);
				if (error != NULL)
					*error = ENXIO;
				return (NULL);
			}
			/*
			 * The block comment at the start of ipif_down
			 * explains the use of the macros used below
			 */
			if (IPIF_CAN_LOOKUP(ipif)) {
				ipif_refhold_locked(ipif);
				mutex_exit(&ill->ill_lock);
				if (!did_alloc)
					*exists = B_TRUE;
				/*
				 * Drop locks before calling ill_refrele
				 * since it can potentially call into
				 * ipif_ill_refrele_tail which can end up
				 * in trying to acquire any lock.
				 */
				RELEASE_CONN_LOCK(q);
				ill_refrele(ill);
				return (ipif);
			} else if (IPIF_CAN_WAIT(ipif, q)) {
				ipsq = ill->ill_phyint->phyint_ipsq;
				mutex_enter(&ipsq->ipsq_lock);
				mutex_exit(&ill->ill_lock);
				ipsq_enq(ipsq, q, mp, func, NEW_OP, ill);
				mutex_exit(&ipsq->ipsq_lock);
				RELEASE_CONN_LOCK(q);
				ill_refrele(ill);
				*error = EINPROGRESS;
				return (NULL);
			}
		}
	}
	RELEASE_CONN_LOCK(q);

	if (!do_alloc) {
		mutex_exit(&ill->ill_lock);
		ill_refrele(ill);
		if (error != NULL)
			*error = ENXIO;
		return (NULL);
	}

	/*
	 * If none found, atomically allocate and return a new one.
	 * Historically, we used IRE_LOOPBACK only for lun 0, and IRE_LOCAL
	 * to support "receive only" use of lo0:1 etc. as is still done
	 * below as an initial guess.
	 * However, this is now likely to be overriden later in ipif_up_done()
	 * when we know for sure what address has been configured on the
	 * interface, since we might have more than one loopback interface
	 * with a loopback address, e.g. in the case of zones, and all the
	 * interfaces with loopback addresses need to be marked IRE_LOOPBACK.
	 */
	if (ill->ill_net_type == IRE_LOOPBACK && id == 0)
		ire_type = IRE_LOOPBACK;
	else
		ire_type = IRE_LOCAL;
	ipif = ipif_allocate(ill, id, ire_type, B_TRUE);
	if (ipif != NULL)
		ipif_refhold_locked(ipif);
	else if (error != NULL)
		*error = ENOMEM;
	mutex_exit(&ill->ill_lock);
	ill_refrele(ill);
	return (ipif);
}

/*
 * This routine is called whenever a new address comes up on an ipif.  If
 * we are configured to respond to address mask requests, then we are supposed
 * to broadcast an address mask reply at this time.  This routine is also
 * called if we are already up, but a netmask change is made.  This is legal
 * but might not make the system manager very popular.	(May be called
 * as writer.)
 */
void
ipif_mask_reply(ipif_t *ipif)
{
	icmph_t	*icmph;
	ipha_t	*ipha;
	mblk_t	*mp;

#define	REPLY_LEN	(sizeof (icmp_ipha) + sizeof (icmph_t) + IP_ADDR_LEN)

	if (!ip_respond_to_address_mask_broadcast)
		return;

	/* ICMP mask reply is IPv4 only */
	ASSERT(!ipif->ipif_isv6);
	/* ICMP mask reply is not for a loopback interface */
	ASSERT(ipif->ipif_ill->ill_wq != NULL);

	mp = allocb(REPLY_LEN, BPRI_HI);
	if (mp == NULL)
		return;
	mp->b_wptr = mp->b_rptr + REPLY_LEN;

	ipha = (ipha_t *)mp->b_rptr;
	bzero(ipha, REPLY_LEN);
	*ipha = icmp_ipha;
	ipha->ipha_ttl = ip_broadcast_ttl;
	ipha->ipha_src = ipif->ipif_src_addr;
	ipha->ipha_dst = ipif->ipif_brd_addr;
	ipha->ipha_length = htons(REPLY_LEN);
	ipha->ipha_ident = 0;

	icmph = (icmph_t *)&ipha[1];
	icmph->icmph_type = ICMP_ADDRESS_MASK_REPLY;
	bcopy(&ipif->ipif_net_mask, &icmph[1], IP_ADDR_LEN);
	icmph->icmph_checksum = IP_CSUM(mp, sizeof (ipha_t), 0);
	if (icmph->icmph_checksum == 0)
		icmph->icmph_checksum = 0xffff;

	put(ipif->ipif_wq, mp);

#undef	REPLY_LEN
}

/*
 * When the mtu in the ipif changes, we call this routine through ire_walk
 * to update all the relevant IREs.
 * Skip IRE_LOCAL and "loopback" IRE_BROADCAST by checking ire_stq.
 */
static void
ipif_mtu_change(ire_t *ire, char *ipif_arg)
{
	ipif_t *ipif = (ipif_t *)ipif_arg;

	if (ire->ire_stq == NULL || ire->ire_ipif != ipif)
		return;
	ire->ire_max_frag = MIN(ipif->ipif_mtu, IP_MAXPACKET);
}

/*
 * When the mtu in the ill changes, we call this routine through ire_walk
 * to update all the relevant IREs.
 * Skip IRE_LOCAL and "loopback" IRE_BROADCAST by checking ire_stq.
 */
void
ill_mtu_change(ire_t *ire, char *ill_arg)
{
	ill_t	*ill = (ill_t *)ill_arg;

	if (ire->ire_stq == NULL || ire->ire_ipif->ipif_ill != ill)
		return;
	ire->ire_max_frag = ire->ire_ipif->ipif_mtu;
}

/*
 * Join the ipif specific multicast groups.
 * Must be called after a mapping has been set up in the resolver.  (Always
 * called as writer.)
 */
void
ipif_multicast_up(ipif_t *ipif)
{
	int err, index;
	ill_t *ill;

	ASSERT(IAM_WRITER_IPIF(ipif));

	ill = ipif->ipif_ill;
	index = ill->ill_phyint->phyint_ifindex;

	ip1dbg(("ipif_multicast_up\n"));
	if (!(ill->ill_flags & ILLF_MULTICAST) || ipif->ipif_multicast_up)
		return;

	if (ipif->ipif_isv6) {
		if (IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr))
			return;

		/* Join the all hosts multicast address */
		ip1dbg(("ipif_multicast_up - addmulti\n"));
		/*
		 * Passing B_TRUE means we have to join the multicast
		 * membership on this interface even though this is
		 * FAILED. If we join on a different one in the group,
		 * we will not be able to delete the membership later
		 * as we currently don't track where we join when we
		 * join within the kernel unlike applications where
		 * we have ilg/ilg_orig_index. See ip_addmulti_v6
		 * for more on this.
		 */
		err = ip_addmulti_v6(&ipv6_all_hosts_mcast, ill, index,
		    ipif->ipif_zoneid, ILGSTAT_NONE, MODE_IS_EXCLUDE, NULL);
		if (err != 0) {
			ip0dbg(("ipif_multicast_up: "
			    "all_hosts_mcast failed %d\n",
			    err));
			return;
		}
		/*
		 * Enable multicast for the solicited node multicast address
		 */
		if (!(ipif->ipif_flags & IPIF_NOLOCAL)) {
			in6_addr_t ipv6_multi = ipv6_solicited_node_mcast;

			ipv6_multi.s6_addr32[3] |=
			    ipif->ipif_v6lcl_addr.s6_addr32[3];

			err = ip_addmulti_v6(&ipv6_multi, ill, index,
			    ipif->ipif_zoneid, ILGSTAT_NONE, MODE_IS_EXCLUDE,
			    NULL);
			if (err != 0) {
				ip0dbg(("ipif_multicast_up: solicited MC"
				    " failed %d\n", err));
				(void) ip_delmulti_v6(&ipv6_all_hosts_mcast,
				    ill, ill->ill_phyint->phyint_ifindex,
				    ipif->ipif_zoneid, B_TRUE, B_TRUE);
				return;
			}
		}
	} else {
		if (ipif->ipif_lcl_addr == INADDR_ANY)
			return;

		/* Join the all hosts multicast address */
		ip1dbg(("ipif_multicast_up - addmulti\n"));
		err = ip_addmulti(htonl(INADDR_ALLHOSTS_GROUP), ipif,
		    ILGSTAT_NONE, MODE_IS_EXCLUDE, NULL);
		if (err) {
			ip0dbg(("ipif_multicast_up: failed %d\n", err));
			return;
		}
	}
	ipif->ipif_multicast_up = 1;
}

/*
 * Blow away any IPv6 multicast groups that we joined in ipif_multicast_up();
 * any explicit memberships are blown away in ill_leave_multicast() when the
 * ill is brought down.
 */
static void
ipif_multicast_down(ipif_t *ipif)
{
	int err;

	ASSERT(IAM_WRITER_IPIF(ipif));

	ip1dbg(("ipif_multicast_down\n"));
	if (!ipif->ipif_multicast_up)
		return;

	ASSERT(ipif->ipif_isv6);

	ip1dbg(("ipif_multicast_down - delmulti\n"));

	/*
	 * Leave the all hosts multicast address. Similar to ip_addmulti_v6,
	 * we should look for ilms on this ill rather than the ones that have
	 * been failed over here.  They are here temporarily. As
	 * ipif_multicast_up has joined on this ill, we should delete only
	 * from this ill.
	 */
	err = ip_delmulti_v6(&ipv6_all_hosts_mcast, ipif->ipif_ill,
	    ipif->ipif_ill->ill_phyint->phyint_ifindex, ipif->ipif_zoneid,
	    B_TRUE, B_TRUE);
	if (err != 0) {
		ip0dbg(("ipif_multicast_down: all_hosts_mcast failed %d\n",
		    err));
	}
	/*
	 * Disable multicast for the solicited node multicast address
	 */
	if (!(ipif->ipif_flags & IPIF_NOLOCAL)) {
		in6_addr_t ipv6_multi = ipv6_solicited_node_mcast;

		ipv6_multi.s6_addr32[3] |=
		    ipif->ipif_v6lcl_addr.s6_addr32[3];

		err = ip_delmulti_v6(&ipv6_multi, ipif->ipif_ill,
		    ipif->ipif_ill->ill_phyint->phyint_ifindex,
		    ipif->ipif_zoneid, B_TRUE, B_TRUE);

		if (err != 0) {
			ip0dbg(("ipif_multicast_down: sol MC failed %d\n",
			    err));
		}
	}

	ipif->ipif_multicast_up = 0;
}

/*
 * Used when an interface comes up to recreate any extra routes on this
 * interface.
 */
static ire_t **
ipif_recover_ire(ipif_t *ipif)
{
	mblk_t	*mp;
	ire_t	**ipif_saved_irep;
	ire_t	**irep;

	ip1dbg(("ipif_recover_ire(%s:%u)", ipif->ipif_ill->ill_name,
	    ipif->ipif_id));

	mutex_enter(&ipif->ipif_saved_ire_lock);
	ipif_saved_irep = (ire_t **)kmem_zalloc(sizeof (ire_t *) *
	    ipif->ipif_saved_ire_cnt, KM_NOSLEEP);
	if (ipif_saved_irep == NULL) {
		mutex_exit(&ipif->ipif_saved_ire_lock);
		return (NULL);
	}

	irep = ipif_saved_irep;
	for (mp = ipif->ipif_saved_ire_mp; mp != NULL; mp = mp->b_cont) {
		ire_t		*ire;
		queue_t		*rfq;
		queue_t		*stq;
		ifrt_t		*ifrt;
		uchar_t		*src_addr;
		uchar_t		*gateway_addr;
		mblk_t		*resolver_mp;
		ushort_t	type;

		/*
		 * When the ire was initially created and then added in
		 * ip_rt_add(), it was created either using ipif->ipif_net_type
		 * in the case of a traditional interface route, or as one of
		 * the IRE_OFFSUBNET types (with the exception of
		 * IRE_HOST_REDIRECT which is created by icmp_redirect() and
		 * which we don't need to save or recover).  In the case where
		 * ipif->ipif_net_type was IRE_LOOPBACK, ip_rt_add() will update
		 * the ire_type to IRE_IF_NORESOLVER before calling ire_add()
		 * to satisfy software like GateD and Sun Cluster which creates
		 * routes using the the loopback interface's address as a
		 * gateway.
		 *
		 * As ifrt->ifrt_type reflects the already updated ire_type and
		 * since ire_create() expects that IRE_IF_NORESOLVER will have
		 * a valid nce_res_mp field (which doesn't make sense for a
		 * IRE_LOOPBACK), ire_create() will be called in the same way
		 * here as in ip_rt_add(), namely using ipif->ipif_net_type when
		 * the route looks like a traditional interface route (where
		 * ifrt->ifrt_type & IRE_INTERFACE is true) and otherwise using
		 * the saved ifrt->ifrt_type.  This means that in the case where
		 * ipif->ipif_net_type is IRE_LOOPBACK, the ire created by
		 * ire_create() will be an IRE_LOOPBACK, it will then be turned
		 * into an IRE_IF_NORESOLVER and then added by ire_add().
		 */
		ifrt = (ifrt_t *)mp->b_rptr;
		if (ifrt->ifrt_type & IRE_INTERFACE) {
			rfq = NULL;
			stq = (ipif->ipif_net_type == IRE_IF_RESOLVER)
			    ? ipif->ipif_rq : ipif->ipif_wq;
			src_addr = (ifrt->ifrt_flags & RTF_SETSRC)
			    ? (uint8_t *)&ifrt->ifrt_src_addr
			    : (uint8_t *)&ipif->ipif_src_addr;
			gateway_addr = NULL;
			resolver_mp = ipif->ipif_resolver_mp;
			type = ipif->ipif_net_type;
		} else if (ifrt->ifrt_type & IRE_BROADCAST) {
			/* Recover multiroute broadcast IRE. */
			rfq = ipif->ipif_rq;
			stq = ipif->ipif_wq;
			src_addr = (ifrt->ifrt_flags & RTF_SETSRC)
			    ? (uint8_t *)&ifrt->ifrt_src_addr
			    : (uint8_t *)&ipif->ipif_src_addr;
			gateway_addr = (uint8_t *)&ifrt->ifrt_gateway_addr;
			resolver_mp = ipif->ipif_bcast_mp;
			type = ifrt->ifrt_type;
		} else {
			rfq = NULL;
			stq = NULL;
			src_addr = (ifrt->ifrt_flags & RTF_SETSRC)
			    ? (uint8_t *)&ifrt->ifrt_src_addr : NULL;
			gateway_addr = (uint8_t *)&ifrt->ifrt_gateway_addr;
			resolver_mp = NULL;
			type = ifrt->ifrt_type;
		}

		/*
		 * Create a copy of the IRE with the saved address and netmask.
		 */
		ip1dbg(("ipif_recover_ire: creating IRE %s (%d) for "
		    "0x%x/0x%x\n",
		    ip_nv_lookup(ire_nv_tbl, ifrt->ifrt_type), ifrt->ifrt_type,
		    ntohl(ifrt->ifrt_addr),
		    ntohl(ifrt->ifrt_mask)));
		ire = ire_create(
		    (uint8_t *)&ifrt->ifrt_addr,
		    (uint8_t *)&ifrt->ifrt_mask,
		    src_addr,
		    gateway_addr,
		    NULL,
		    &ifrt->ifrt_max_frag,
		    NULL,
		    rfq,
		    stq,
		    type,
		    resolver_mp,
		    ipif,
		    NULL,
		    0,
		    0,
		    0,
		    ifrt->ifrt_flags,
		    &ifrt->ifrt_iulp_info,
		    NULL,
		    NULL);

		if (ire == NULL) {
			mutex_exit(&ipif->ipif_saved_ire_lock);
			kmem_free(ipif_saved_irep,
			    ipif->ipif_saved_ire_cnt * sizeof (ire_t *));
			return (NULL);
		}

		/*
		 * Some software (for example, GateD and Sun Cluster) attempts
		 * to create (what amount to) IRE_PREFIX routes with the
		 * loopback address as the gateway.  This is primarily done to
		 * set up prefixes with the RTF_REJECT flag set (for example,
		 * when generating aggregate routes.)
		 *
		 * If the IRE type (as defined by ipif->ipif_net_type) is
		 * IRE_LOOPBACK, then we map the request into a
		 * IRE_IF_NORESOLVER.
		 */
		if (ipif->ipif_net_type == IRE_LOOPBACK)
			ire->ire_type = IRE_IF_NORESOLVER;
		/*
		 * ire held by ire_add, will be refreled' towards the
		 * the end of ipif_up_done
		 */
		(void) ire_add(&ire, NULL, NULL, NULL, B_FALSE);
		*irep = ire;
		irep++;
		ip1dbg(("ipif_recover_ire: added ire %p\n", (void *)ire));
	}
	mutex_exit(&ipif->ipif_saved_ire_lock);
	return (ipif_saved_irep);
}

/*
 * Used to set the netmask and broadcast address to default values when the
 * interface is brought up.  (Always called as writer.)
 */
static void
ipif_set_default(ipif_t *ipif)
{
	ASSERT(MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	if (!ipif->ipif_isv6) {
		/*
		 * Interface holds an IPv4 address. Default
		 * mask is the natural netmask.
		 */
		if (!ipif->ipif_net_mask) {
			ipaddr_t	v4mask;

			v4mask = ip_net_mask(ipif->ipif_lcl_addr);
			V4MASK_TO_V6(v4mask, ipif->ipif_v6net_mask);
		}
		if (ipif->ipif_flags & IPIF_POINTOPOINT) {
			/* ipif_subnet is ipif_pp_dst_addr for pt-pt */
			ipif->ipif_v6subnet = ipif->ipif_v6pp_dst_addr;
		} else {
			V6_MASK_COPY(ipif->ipif_v6lcl_addr,
			    ipif->ipif_v6net_mask, ipif->ipif_v6subnet);
		}
		/*
		 * NOTE: SunOS 4.X does this even if the broadcast address
		 * has been already set thus we do the same here.
		 */
		if (ipif->ipif_flags & IPIF_BROADCAST) {
			ipaddr_t	v4addr;

			v4addr = ipif->ipif_subnet | ~ipif->ipif_net_mask;
			IN6_IPADDR_TO_V4MAPPED(v4addr, &ipif->ipif_v6brd_addr);
		}
	} else {
		/*
		 * Interface holds an IPv6-only address.  Default
		 * mask is all-ones.
		 */
		if (IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6net_mask))
			ipif->ipif_v6net_mask = ipv6_all_ones;
		if (ipif->ipif_flags & IPIF_POINTOPOINT) {
			/* ipif_subnet is ipif_pp_dst_addr for pt-pt */
			ipif->ipif_v6subnet = ipif->ipif_v6pp_dst_addr;
		} else {
			V6_MASK_COPY(ipif->ipif_v6lcl_addr,
			    ipif->ipif_v6net_mask, ipif->ipif_v6subnet);
		}
	}
}

/*
 * Return 0 if this address can be used as local address without causing
 * duplicate address problems. Otherwise, return EADDRNOTAVAIL if the address
 * is already up on a different ill, and EADDRINUSE if it's up on the same ill.
 * Special checks are needed to allow the same IPv6 link-local address
 * on different ills.
 * TODO: allowing the same site-local address on different ill's.
 */
int
ip_addr_availability_check(ipif_t *new_ipif)
{
	in6_addr_t our_v6addr;
	ill_t *ill;
	ipif_t *ipif;
	ill_walk_context_t ctx;

	ASSERT(IAM_WRITER_IPIF(new_ipif));
	ASSERT(MUTEX_HELD(&ip_addr_avail_lock));
	ASSERT(RW_READ_HELD(&ill_g_lock));

	new_ipif->ipif_flags &= ~IPIF_UNNUMBERED;
	if (IN6_IS_ADDR_UNSPECIFIED(&new_ipif->ipif_v6lcl_addr) ||
	    IN6_IS_ADDR_V4MAPPED_ANY(&new_ipif->ipif_v6lcl_addr))
		return (0);

	our_v6addr = new_ipif->ipif_v6lcl_addr;

	if (new_ipif->ipif_isv6)
		ill = ILL_START_WALK_V6(&ctx);
	else
		ill = ILL_START_WALK_V4(&ctx);

	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if ((ipif == new_ipif) ||
			    !(ipif->ipif_flags & IPIF_UP) ||
			    (ipif->ipif_flags & IPIF_UNNUMBERED))
				continue;
			if (IN6_ARE_ADDR_EQUAL(&ipif->ipif_v6lcl_addr,
			    &our_v6addr)) {
				if (new_ipif->ipif_flags & IPIF_POINTOPOINT)
				    new_ipif->ipif_flags |= IPIF_UNNUMBERED;
				else if (ipif->ipif_flags & IPIF_POINTOPOINT)
				    ipif->ipif_flags |= IPIF_UNNUMBERED;
				else if (IN6_IS_ADDR_LINKLOCAL(&our_v6addr) &&
				    new_ipif->ipif_ill != ill)
					continue;
				else if (IN6_IS_ADDR_SITELOCAL(&our_v6addr) &&
				    new_ipif->ipif_ill != ill)
					continue;
				else if (new_ipif->ipif_zoneid !=
				    ipif->ipif_zoneid &&
				    ipif->ipif_zoneid != ALL_ZONES &&
				    (ill->ill_phyint->phyint_flags &
				    PHYI_LOOPBACK))
					continue;
				else if (new_ipif->ipif_ill == ill)
					return (EADDRINUSE);
				else
					return (EADDRNOTAVAIL);
			}
		}
	}

	return (0);
}

/*
 * Bring up an ipif: bring up arp/ndp, bring up the DLPI stream, and add
 * IREs for the ipif.
 * When the routine returns EINPROGRESS then mp has been consumed and
 * the ioctl will be acked from ip_rput_dlpi.
 */
static int
ipif_up(ipif_t *ipif, queue_t *q, mblk_t *mp)
{
	ill_t	*ill = ipif->ipif_ill;
	boolean_t isv6 = ipif->ipif_isv6;
	int	err = 0;
	boolean_t success;

	ASSERT(IAM_WRITER_IPIF(ipif));

	ip1dbg(("ipif_up(%s:%u)\n", ill->ill_name, ipif->ipif_id));

	/* Shouldn't get here if it is already up. */
	if (ipif->ipif_flags & IPIF_UP)
		return (EALREADY);

	/* Skip arp/ndp for any loopback interface. */
	if (ill->ill_wq != NULL) {
		conn_t *connp = Q_TO_CONN(q);
		ipsq_t	*ipsq = ill->ill_phyint->phyint_ipsq;

		if (!ill->ill_dl_up) {
			/*
			 * ill_dl_up is not yet set. i.e. we are yet to
			 * DL_BIND with the driver and this is the first
			 * logical interface on the ill to become "up".
			 * Tell the driver to get going (via DL_BIND_REQ).
			 * Note that changing "significant" IFF_ flags
			 * address/netmask etc cause a down/up dance, but
			 * does not cause an unbind (DL_UNBIND) with the driver
			 */
			return (ill_dl_up(ill, ipif, mp, q));
		}

		/*
		 * ipif_resolver_up may end up sending an
		 * AR_INTERFACE_UP message to ARP, which would, in
		 * turn send a DLPI message to the driver. ioctls are
		 * serialized and so we cannot send more than one
		 * interface up message at a time. If ipif_resolver_up
		 * does send an interface up message to ARP, we get
		 * EINPROGRESS and we will complete in ip_arp_done.
		 */

		ASSERT(connp != NULL);
		ASSERT(ipsq->ipsq_pending_mp == NULL);
		mutex_enter(&connp->conn_lock);
		mutex_enter(&ill->ill_lock);
		success = ipsq_pending_mp_add(connp, ipif, q, mp, 0);
		mutex_exit(&ill->ill_lock);
		mutex_exit(&connp->conn_lock);
		if (!success)
			return (EINTR);

		/*
		 * Crank up IPv6 neighbor discovery
		 * Unlike ARP, this should complete when
		 * ipif_ndp_up returns. However, for
		 * ILLF_XRESOLV interfaces we also send a
		 * AR_INTERFACE_UP to the external resolver.
		 * That ioctl will complete in ip_rput.
		 */
		if (isv6) {
			err = ipif_ndp_up(ipif, &ipif->ipif_v6lcl_addr,
			    B_FALSE);
			if (err != 0) {
				if (err != EINPROGRESS)
					mp = ipsq_pending_mp_get(ipsq, &connp);
				return (err);
			}
		}
		/* Now, ARP */
		err = ipif_resolver_up(ipif, Res_act_initial);
		if (err == EINPROGRESS) {
			/* We will complete it in ip_arp_done */
			return (err);
		}
		mp = ipsq_pending_mp_get(ipsq, &connp);
		ASSERT(mp != NULL);
		if (err != 0)
			return (err);
	}
	return (isv6 ? ipif_up_done_v6(ipif) : ipif_up_done(ipif));
}

/*
 * Perform a bind for the physical device.
 * When the routine returns EINPROGRESS then mp has been consumed and
 * the ioctl will be acked from ip_rput_dlpi.
 * Allocate an unbind message and save it until ipif_down.
 */
static int
ill_dl_up(ill_t *ill, ipif_t *ipif, mblk_t *mp, queue_t *q)
{
	mblk_t	*areq_mp = NULL;
	mblk_t	*bind_mp = NULL;
	mblk_t	*unbind_mp = NULL;
	conn_t	*connp;
	boolean_t success;

	ip1dbg(("ill_dl_up(%s)\n", ill->ill_name));
	ASSERT(IAM_WRITER_ILL(ill));

	ASSERT(mp != NULL);

	/* Create a resolver cookie for ARP */
	if (!ill->ill_isv6 && ill->ill_net_type == IRE_IF_RESOLVER) {
		areq_t		*areq;
		uint16_t	sap_addr;

		areq_mp = ill_arp_alloc(ill,
			(uchar_t *)&ip_areq_template, 0);
		if (areq_mp == NULL) {
			return (ENOMEM);
		}
		freemsg(ill->ill_resolver_mp);
		ill->ill_resolver_mp = areq_mp;
		areq = (areq_t *)areq_mp->b_rptr;
		sap_addr = ill->ill_sap;
		bcopy(&sap_addr, areq->areq_sap, sizeof (sap_addr));
		/*
		 * Wait till we call ill_pending_mp_add to determine
		 * the success before we free the ill_resolver_mp and
		 * attach areq_mp in it's place.
		 */
	}
	bind_mp = ip_dlpi_alloc(sizeof (dl_bind_req_t) + sizeof (long),
	    DL_BIND_REQ);
	if (bind_mp == NULL)
		goto bad;
	((dl_bind_req_t *)bind_mp->b_rptr)->dl_sap = ill->ill_sap;
	((dl_bind_req_t *)bind_mp->b_rptr)->dl_service_mode = DL_CLDLS;

	unbind_mp = ip_dlpi_alloc(sizeof (dl_unbind_req_t), DL_UNBIND_REQ);
	if (unbind_mp == NULL)
		goto bad;

	/*
	 * Record state needed to complete this operation when the
	 * DL_BIND_ACK shows up.  Also remember the pre-allocated mblks.
	 */
	if (WR(q)->q_next == NULL) {
		connp = Q_TO_CONN(q);
		mutex_enter(&connp->conn_lock);
	} else {
		connp = NULL;
	}
	mutex_enter(&ipif->ipif_ill->ill_lock);
	success = ipsq_pending_mp_add(connp, ipif, q, mp, 0);
	mutex_exit(&ipif->ipif_ill->ill_lock);
	if (connp != NULL)
		mutex_exit(&connp->conn_lock);
	if (!success)
		goto bad;

	/*
	 * Save the unbind message for ill_dl_down(); it will be consumed when
	 * the interface goes down.
	 */
	ASSERT(ill->ill_unbind_mp == NULL);
	ill->ill_unbind_mp = unbind_mp;

	ill_dlpi_send(ill, bind_mp);
	/* Send down link-layer capabilities probe if not already done. */
	ill_capability_probe(ill);

	/*
	 * Sysid used to rely on the fact that netboots set domainname
	 * and the like. Now that miniroot boots aren't strictly netboots
	 * and miniroot network configuration is driven from userland
	 * these things still need to be set. This situation can be detected
	 * by comparing the interface being configured here to the one
	 * dhcack was set to reference by the boot loader. Once sysid is
	 * converted to use dhcp_ipc_getinfo() this call can go away.
	 */
	if ((ipif->ipif_flags & IPIF_DHCPRUNNING) && (dhcack != NULL) &&
	    (strcmp(ill->ill_name, dhcack) == 0) &&
	    (strlen(srpc_domain) == 0)) {
		if (dhcpinit() != 0)
			cmn_err(CE_WARN, "no cached dhcp response");
	}

	/*
	 * This operation will complete in ip_rput_dlpi with either
	 * a DL_BIND_ACK or DL_ERROR_ACK.
	 */
	return (EINPROGRESS);
bad:
	ip1dbg(("ill_dl_up(%s) FAILED\n", ill->ill_name));
	/*
	 * We don't have to check for possible removal from illgrp
	 * as we have not yet inserted in illgrp. For groups
	 * without names, this ipif is still not UP and hence
	 * this could not have possibly had any influence in forming
	 * groups.
	 */

	if (bind_mp != NULL)
		freemsg(bind_mp);
	if (unbind_mp != NULL)
		freemsg(unbind_mp);
	return (ENOMEM);
}

uint_t ip_loopback_mtuplus = IP_LOOPBACK_MTU + IP_SIMPLE_HDR_LENGTH + 20;

/*
 * DLPI and ARP is up.
 * Create all the IREs associated with an interface bring up multicast.
 * Set the interface flag and finish other initialization
 * that potentially had to be differed to after DL_BIND_ACK.
 */
int
ipif_up_done(ipif_t *ipif)
{
	ire_t	*ire_array[20];
	ire_t	**irep = ire_array;
	ire_t	**irep1;
	ipaddr_t net_mask = 0;
	ipaddr_t subnet_mask, route_mask;
	ill_t	*ill = ipif->ipif_ill;
	queue_t	*stq;
	ipif_t	 *src_ipif;
	ipif_t   *tmp_ipif;
	boolean_t	flush_ire_cache = B_TRUE;
	int	err = 0;
	phyint_t *phyi;
	ire_t	**ipif_saved_irep = NULL;
	int ipif_saved_ire_cnt;
	int	cnt;
	boolean_t	src_ipif_held = B_FALSE;
	boolean_t	ire_added = B_FALSE;
	boolean_t	loopback = B_FALSE;

	ip1dbg(("ipif_up_done(%s:%u)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id));
	/* Check if this is a loopback interface */
	if (ipif->ipif_ill->ill_wq == NULL)
		loopback = B_TRUE;

	ASSERT(!MUTEX_HELD(&ipif->ipif_ill->ill_lock));
	/*
	 * If all other interfaces for this ill are down or DEPRECATED,
	 * or otherwise unsuitable for source address selection, remove
	 * any IRE_CACHE entries for this ill to make sure source
	 * address selection gets to take this new ipif into account.
	 * No need to hold ill_lock while traversing the ipif list since
	 * we are writer
	 */
	for (tmp_ipif = ill->ill_ipif; tmp_ipif;
		tmp_ipif = tmp_ipif->ipif_next) {
		if (((tmp_ipif->ipif_flags &
		    (IPIF_NOXMIT|IPIF_ANYCAST|IPIF_NOLOCAL|IPIF_DEPRECATED)) ||
		    !(tmp_ipif->ipif_flags & IPIF_UP)) ||
		    (tmp_ipif == ipif))
			continue;
		/* first useable pre-existing interface */
		flush_ire_cache = B_FALSE;
		break;
	}
	if (flush_ire_cache)
		ire_walk_ill_v4(MATCH_IRE_ILL_GROUP | MATCH_IRE_TYPE,
		    IRE_CACHE, ill_ipif_cache_delete, (char *)ill, ill);

	/*
	 * Figure out which way the send-to queue should go.  Only
	 * IRE_IF_RESOLVER or IRE_IF_NORESOLVER or IRE_LOOPBACK
	 * should show up here.
	 */
	switch (ill->ill_net_type) {
	case IRE_IF_RESOLVER:
		stq = ill->ill_rq;
		break;
	case IRE_IF_NORESOLVER:
	case IRE_LOOPBACK:
		stq = ill->ill_wq;
		break;
	default:
		return (EINVAL);
	}

	if (ill->ill_phyint->phyint_flags & PHYI_LOOPBACK) {
		/*
		 * lo0:1 and subsequent ipifs were marked IRE_LOCAL in
		 * ipif_lookup_on_name(), but in the case of zones we can have
		 * several loopback addresses on lo0. So all the interfaces with
		 * loopback addresses need to be marked IRE_LOOPBACK.
		 */
		if (V4_PART_OF_V6(ipif->ipif_v6lcl_addr) ==
		    htonl(INADDR_LOOPBACK))
			ipif->ipif_ire_type = IRE_LOOPBACK;
		else
			ipif->ipif_ire_type = IRE_LOCAL;
	}

	if (ipif->ipif_flags & (IPIF_NOLOCAL|IPIF_ANYCAST|IPIF_DEPRECATED)) {
		/*
		 * Can't use our source address. Select a different
		 * source address for the IRE_INTERFACE and IRE_LOCAL
		 */
		src_ipif = ipif_select_source(ipif->ipif_ill,
		    ipif->ipif_subnet, ipif->ipif_zoneid);
		if (src_ipif == NULL)
			src_ipif = ipif;	/* Last resort */
		else
			src_ipif_held = B_TRUE;
	} else {
		src_ipif = ipif;
	}

	/* Create all the IREs associated with this interface */
	if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
	    !(ipif->ipif_flags & IPIF_NOLOCAL)) {

		/*
		 * If we're on a labeled system then make sure that zone-
		 * private addresses have proper remote host database entries.
		 */
		if (is_system_labeled() &&
		    ipif->ipif_ire_type != IRE_LOOPBACK &&
		    !tsol_check_interface_address(ipif))
			return (EINVAL);

		/* Register the source address for __sin6_src_id */
		err = ip_srcid_insert(&ipif->ipif_v6lcl_addr,
		    ipif->ipif_zoneid);
		if (err != 0) {
			ip0dbg(("ipif_up_done: srcid_insert %d\n", err));
			return (err);
		}

		/* If the interface address is set, create the local IRE. */
		ip1dbg(("ipif_up_done: 0x%p creating IRE 0x%x for 0x%x\n",
			(void *)ipif,
			ipif->ipif_ire_type,
			ntohl(ipif->ipif_lcl_addr)));
		*irep++ = ire_create(
		    (uchar_t *)&ipif->ipif_lcl_addr,	/* dest address */
		    (uchar_t *)&ip_g_all_ones,		/* mask */
		    (uchar_t *)&src_ipif->ipif_src_addr, /* source address */
		    NULL,				/* no gateway */
		    NULL,
		    &ip_loopback_mtuplus,		/* max frag size */
		    NULL,
		    ipif->ipif_rq,			/* recv-from queue */
		    NULL,				/* no send-to queue */
		    ipif->ipif_ire_type,		/* LOCAL or LOOPBACK */
		    NULL,
		    ipif,
		    NULL,
		    0,
		    0,
		    0,
		    (ipif->ipif_flags & IPIF_PRIVATE) ?
		    RTF_PRIVATE : 0,
		    &ire_uinfo_null,
		    NULL,
		    NULL);
	} else {
		ip1dbg((
		    "ipif_up_done: not creating IRE %d for 0x%x: flags 0x%x\n",
		    ipif->ipif_ire_type,
		    ntohl(ipif->ipif_lcl_addr),
		    (uint_t)ipif->ipif_flags));
	}
	if ((ipif->ipif_lcl_addr != INADDR_ANY) &&
	    !(ipif->ipif_flags & IPIF_NOLOCAL)) {
		net_mask = ip_net_mask(ipif->ipif_lcl_addr);
	} else {
		net_mask = htonl(IN_CLASSA_NET);	/* fallback */
	}

	subnet_mask = ipif->ipif_net_mask;

	/*
	 * If mask was not specified, use natural netmask of
	 * interface address. Also, store this mask back into the
	 * ipif struct.
	 */
	if (subnet_mask == 0) {
		subnet_mask = net_mask;
		V4MASK_TO_V6(subnet_mask, ipif->ipif_v6net_mask);
		V6_MASK_COPY(ipif->ipif_v6lcl_addr, ipif->ipif_v6net_mask,
		    ipif->ipif_v6subnet);
	}

	/* Set up the IRE_IF_RESOLVER or IRE_IF_NORESOLVER, as appropriate. */
	if (stq != NULL && !(ipif->ipif_flags & IPIF_NOXMIT) &&
	    ipif->ipif_subnet != INADDR_ANY) {
		/* ipif_subnet is ipif_pp_dst_addr for pt-pt */

		if (ipif->ipif_flags & IPIF_POINTOPOINT) {
			route_mask = IP_HOST_MASK;
		} else {
			route_mask = subnet_mask;
		}

		ip1dbg(("ipif_up_done: ipif 0x%p ill 0x%p "
		    "creating if IRE ill_net_type 0x%x for 0x%x\n",
			(void *)ipif, (void *)ill,
			ill->ill_net_type,
			ntohl(ipif->ipif_subnet)));
		*irep++ = ire_create(
		    (uchar_t *)&ipif->ipif_subnet,	/* dest address */
		    (uchar_t *)&route_mask,		/* mask */
		    (uchar_t *)&src_ipif->ipif_src_addr, /* src addr */
		    NULL,				/* no gateway */
		    NULL,
		    &ipif->ipif_mtu,			/* max frag */
		    NULL,
		    NULL,				/* no recv queue */
		    stq,				/* send-to queue */
		    ill->ill_net_type,			/* IF_[NO]RESOLVER */
		    ill->ill_resolver_mp,		/* xmit header */
		    ipif,
		    NULL,
		    0,
		    0,
		    0,
		    (ipif->ipif_flags & IPIF_PRIVATE) ? RTF_PRIVATE: 0,
		    &ire_uinfo_null,
		    NULL,
		    NULL);
	}

	/*
	 * If the interface address is set, create the broadcast IREs.
	 *
	 * ire_create_bcast checks if the proposed new IRE matches
	 * any existing IRE's with the same physical interface (ILL).
	 * This should get rid of duplicates.
	 * ire_create_bcast also check IPIF_NOXMIT and does not create
	 * any broadcast ires.
	 */
	if ((ipif->ipif_subnet != INADDR_ANY) &&
	    (ipif->ipif_flags & IPIF_BROADCAST)) {
		ipaddr_t addr;

		ip1dbg(("ipif_up_done: creating broadcast IRE\n"));
		irep = ire_check_and_create_bcast(ipif, 0, irep,
		    (MATCH_IRE_TYPE | MATCH_IRE_ILL));
		irep = ire_check_and_create_bcast(ipif, INADDR_BROADCAST, irep,
		    (MATCH_IRE_TYPE | MATCH_IRE_ILL));

		/*
		 * For backward compatibility, we need to create net
		 * broadcast ire's based on the old "IP address class
		 * system."  The reason is that some old machines only
		 * respond to these class derived net broadcast.
		 *
		 * But we should not create these net broadcast ire's if
		 * the subnet_mask is shorter than the IP address class based
		 * derived netmask.  Otherwise, we may create a net
		 * broadcast address which is the same as an IP address
		 * on the subnet.  Then TCP will refuse to talk to that
		 * address.
		 *
		 * Nor do we need IRE_BROADCAST ire's for the interface
		 * with the netmask as 0xFFFFFFFF, as IRE_LOCAL for that
		 * interface is already created.  Creating these broadcast
		 * ire's will only create confusion as the "addr" is going
		 * to be same as that of the IP address of the interface.
		 */
		if (net_mask < subnet_mask) {
			addr = net_mask & ipif->ipif_subnet;
			irep = ire_check_and_create_bcast(ipif, addr, irep,
			    (MATCH_IRE_TYPE | MATCH_IRE_ILL));
			irep = ire_check_and_create_bcast(ipif,
			    ~net_mask | addr, irep,
			    (MATCH_IRE_TYPE | MATCH_IRE_ILL));
		}

		if (subnet_mask != 0xFFFFFFFF) {
			addr = ipif->ipif_subnet;
			irep = ire_check_and_create_bcast(ipif, addr, irep,
			    (MATCH_IRE_TYPE | MATCH_IRE_ILL));
			irep = ire_check_and_create_bcast(ipif,
			    ~subnet_mask|addr, irep,
			    (MATCH_IRE_TYPE | MATCH_IRE_ILL));
		}
	}

	ASSERT(!MUTEX_HELD(&ipif->ipif_ill->ill_lock));

	/* If an earlier ire_create failed, get out now */
	for (irep1 = irep; irep1 > ire_array; ) {
		irep1--;
		if (*irep1 == NULL) {
			ip1dbg(("ipif_up_done: NULL ire found in ire_array\n"));
			err = ENOMEM;
			goto bad;
		}
	}

	/*
	 * Need to atomically check for ip_addr_availablity_check
	 * under ip_addr_avail_lock, and if it fails got bad, and remove
	 * from group also.The ill_g_lock is grabbed as reader
	 * just to make sure no new ills or new ipifs are being added
	 * to the system while we are checking the uniqueness of addresses.
	 */
	rw_enter(&ill_g_lock, RW_READER);
	mutex_enter(&ip_addr_avail_lock);
	/* Mark it up, and increment counters. */
	ill->ill_ipif_up_count++;
	ipif->ipif_flags |= IPIF_UP;
	err = ip_addr_availability_check(ipif);
	mutex_exit(&ip_addr_avail_lock);
	rw_exit(&ill_g_lock);

	if (err != 0) {
		/*
		 * Our address may already be up on the same ill. In this case,
		 * the ARP entry for our ipif replaced the one for the other
		 * ipif. So we don't want to delete it (otherwise the other ipif
		 * would be unable to send packets).
		 * ip_addr_availability_check() identifies this case for us and
		 * returns EADDRINUSE; we need to turn it into EADDRNOTAVAIL
		 * which is the expected error code.
		 */
		if (err == EADDRINUSE) {
			freemsg(ipif->ipif_arp_del_mp);
			ipif->ipif_arp_del_mp = NULL;
			err = EADDRNOTAVAIL;
		}
		ill->ill_ipif_up_count--;
		ipif->ipif_flags &= ~IPIF_UP;
		goto bad;
	}

	/*
	 * Add in all newly created IREs.  ire_create_bcast() has
	 * already checked for duplicates of the IRE_BROADCAST type.
	 * We want to add before we call ifgrp_insert which wants
	 * to know whether IRE_IF_RESOLVER exists or not.
	 *
	 * NOTE : We refrele the ire though we may branch to "bad"
	 *	  later on where we do ire_delete. This is okay
	 *	  because nobody can delete it as we are running
	 *	  exclusively.
	 */
	for (irep1 = irep; irep1 > ire_array; ) {
		irep1--;
		ASSERT(!MUTEX_HELD(&((*irep1)->ire_ipif->ipif_ill->ill_lock)));
		/*
		 * refheld by ire_add. refele towards the end of the func
		 */
		(void) ire_add(irep1, NULL, NULL, NULL, B_FALSE);
	}
	ire_added = B_TRUE;
	/*
	 * Form groups if possible.
	 *
	 * If we are supposed to be in a ill_group with a name, insert it
	 * now as we know that at least one ipif is UP. Otherwise form
	 * nameless groups.
	 *
	 * If ip_enable_group_ifs is set and ipif address is not 0, insert
	 * this ipif into the appropriate interface group, or create a
	 * new one. If this is already in a nameless group, we try to form
	 * a bigger group looking at other ills potentially sharing this
	 * ipif's prefix.
	 */
	phyi = ill->ill_phyint;
	if (phyi->phyint_groupname_len != 0) {
		ASSERT(phyi->phyint_groupname != NULL);
		if (ill->ill_ipif_up_count == 1) {
			ASSERT(ill->ill_group == NULL);
			err = illgrp_insert(&illgrp_head_v4, ill,
			    phyi->phyint_groupname, NULL, B_TRUE);
			if (err != 0) {
				ip1dbg(("ipif_up_done: illgrp allocation "
				    "failed, error %d\n", err));
				goto bad;
			}
		}
		ASSERT(ill->ill_group != NULL);
	}

	/*
	 * When this is part of group, we need to make sure that
	 * any broadcast ires created because of this ipif coming
	 * UP gets marked/cleared with IRE_MARK_NORECV appropriately
	 * so that we don't receive duplicate broadcast packets.
	 */
	if (ill->ill_group != NULL && ill->ill_ipif_up_count != 0)
		ipif_renominate_bcast(ipif);

	/* Recover any additional IRE_IF_[NO]RESOLVER entries for this ipif */
	ipif_saved_ire_cnt = ipif->ipif_saved_ire_cnt;
	ipif_saved_irep = ipif_recover_ire(ipif);

	if (!loopback) {
		/*
		 * If the broadcast address has been set, make sure it makes
		 * sense based on the interface address.
		 * Only match on ill since we are sharing broadcast addresses.
		 */
		if ((ipif->ipif_brd_addr != INADDR_ANY) &&
		    (ipif->ipif_flags & IPIF_BROADCAST)) {
			ire_t	*ire;

			ire = ire_ctable_lookup(ipif->ipif_brd_addr, 0,
			    IRE_BROADCAST, ipif, ALL_ZONES,
			    NULL, (MATCH_IRE_TYPE | MATCH_IRE_ILL));

			if (ire == NULL) {
				/*
				 * If there isn't a matching broadcast IRE,
				 * revert to the default for this netmask.
				 */
				ipif->ipif_v6brd_addr = ipv6_all_zeros;
				mutex_enter(&ipif->ipif_ill->ill_lock);
				ipif_set_default(ipif);
				mutex_exit(&ipif->ipif_ill->ill_lock);
			} else {
				ire_refrele(ire);
			}
		}

	}

	/* This is the first interface on this ill */
	if (ipif->ipif_ipif_up_count == 1 && !loopback) {
		/*
		 * Need to recover all multicast memberships in the driver.
		 * This had to be deferred until we had attached.
		 */
		ill_recover_multicast(ill);
	}
	/* Join the allhosts multicast address */
	ipif_multicast_up(ipif);

	if (!loopback) {
		/*
		 * See whether anybody else would benefit from the
		 * new ipif that we added. We call this always rather
		 * than while adding a non-IPIF_NOLOCAL/DEPRECATED/ANYCAST
		 * ipif is for the benefit of illgrp_insert (done above)
		 * which does not do source address selection as it does
		 * not want to re-create interface routes that we are
		 * having reference to it here.
		 */
		ill_update_source_selection(ill);
	}

	for (irep1 = irep; irep1 > ire_array; ) {
		irep1--;
		if (*irep1 != NULL) {
			/* was held in ire_add */
			ire_refrele(*irep1);
		}
	}

	cnt = ipif_saved_ire_cnt;
	for (irep1 = ipif_saved_irep; cnt > 0; irep1++, cnt--) {
		if (*irep1 != NULL) {
			/* was held in ire_add */
			ire_refrele(*irep1);
		}
	}

	if (!loopback && ipif->ipif_addr_ready) {
		/* Broadcast an address mask reply. */
		ipif_mask_reply(ipif);
	}
	if (ipif_saved_irep != NULL) {
		kmem_free(ipif_saved_irep,
		    ipif_saved_ire_cnt * sizeof (ire_t *));
	}
	if (src_ipif_held)
		ipif_refrele(src_ipif);

	/*
	 * This had to be deferred until we had bound.  Tell routing sockets and
	 * others that this interface is up if it looks like the address has
	 * been validated.  Otherwise, if it isn't ready yet, wait for
	 * duplicate address detection to do its thing.
	 */
	if (ipif->ipif_addr_ready) {
		ip_rts_ifmsg(ipif);
		ip_rts_newaddrmsg(RTM_ADD, 0, ipif);
		/* Let SCTP update the status for this ipif */
		sctp_update_ipif(ipif, SCTP_IPIF_UP);
	}
	return (0);

bad:
	ip1dbg(("ipif_up_done: FAILED \n"));
	/*
	 * We don't have to bother removing from ill groups because
	 *
	 * 1) For groups with names, we insert only when the first ipif
	 *    comes up. In that case if it fails, it will not be in any
	 *    group. So, we need not try to remove for that case.
	 *
	 * 2) For groups without names, either we tried to insert ipif_ill
	 *    in a group as singleton or found some other group to become
	 *    a bigger group. For the former, if it fails we don't have
	 *    anything to do as ipif_ill is not in the group and for the
	 *    latter, there are no failures in illgrp_insert/illgrp_delete
	 *    (ENOMEM can't occur for this. Check ifgrp_insert).
	 */
	while (irep > ire_array) {
		irep--;
		if (*irep != NULL) {
			ire_delete(*irep);
			if (ire_added)
				ire_refrele(*irep);
		}
	}
	(void) ip_srcid_remove(&ipif->ipif_v6lcl_addr, ipif->ipif_zoneid);

	if (ipif_saved_irep != NULL) {
		kmem_free(ipif_saved_irep,
		    ipif_saved_ire_cnt * sizeof (ire_t *));
	}
	if (src_ipif_held)
		ipif_refrele(src_ipif);

	ipif_arp_down(ipif);
	return (err);
}

/*
 * Turn off the ARP with the ILLF_NOARP flag.
 */
static int
ill_arp_off(ill_t *ill)
{
	mblk_t	*arp_off_mp = NULL;
	mblk_t	*arp_on_mp = NULL;

	ip1dbg(("ill_arp_off(%s)\n", ill->ill_name));

	ASSERT(IAM_WRITER_ILL(ill));
	ASSERT(ill->ill_net_type == IRE_IF_RESOLVER);

	/*
	 * If the on message is still around we've already done
	 * an arp_off without doing an arp_on thus there is no
	 * work needed.
	 */
	if (ill->ill_arp_on_mp != NULL)
		return (0);

	/*
	 * Allocate an ARP on message (to be saved) and an ARP off message
	 */
	arp_off_mp = ill_arp_alloc(ill, (uchar_t *)&ip_aroff_template, 0);
	if (!arp_off_mp)
		return (ENOMEM);

	arp_on_mp = ill_arp_alloc(ill, (uchar_t *)&ip_aron_template, 0);
	if (!arp_on_mp)
		goto failed;

	ASSERT(ill->ill_arp_on_mp == NULL);
	ill->ill_arp_on_mp = arp_on_mp;

	/* Send an AR_INTERFACE_OFF request */
	putnext(ill->ill_rq, arp_off_mp);
	return (0);
failed:

	if (arp_off_mp)
		freemsg(arp_off_mp);
	return (ENOMEM);
}

/*
 * Turn on ARP by turning off the ILLF_NOARP flag.
 */
static int
ill_arp_on(ill_t *ill)
{
	mblk_t	*mp;

	ip1dbg(("ipif_arp_on(%s)\n", ill->ill_name));

	ASSERT(ill->ill_net_type == IRE_IF_RESOLVER);

	ASSERT(IAM_WRITER_ILL(ill));
	/*
	 * Send an AR_INTERFACE_ON request if we have already done
	 * an arp_off (which allocated the message).
	 */
	if (ill->ill_arp_on_mp != NULL) {
		mp = ill->ill_arp_on_mp;
		ill->ill_arp_on_mp = NULL;
		putnext(ill->ill_rq, mp);
	}
	return (0);
}

/*
 * Called after either deleting ill from the group or when setting
 * FAILED or STANDBY on the interface.
 */
static void
illgrp_reset_schednext(ill_t *ill)
{
	ill_group_t *illgrp;
	ill_t *save_ill;

	ASSERT(IAM_WRITER_ILL(ill));
	/*
	 * When called from illgrp_delete, ill_group will be non-NULL.
	 * But when called from ip_sioctl_flags, it could be NULL if
	 * somebody is setting FAILED/INACTIVE on some interface which
	 * is not part of a group.
	 */
	illgrp = ill->ill_group;
	if (illgrp == NULL)
		return;
	if (illgrp->illgrp_ill_schednext != ill)
		return;

	illgrp->illgrp_ill_schednext = NULL;
	save_ill = ill;
	/*
	 * Choose a good ill to be the next one for
	 * outbound traffic. As the flags FAILED/STANDBY is
	 * not yet marked when called from ip_sioctl_flags,
	 * we check for ill separately.
	 */
	for (ill = illgrp->illgrp_ill; ill != NULL;
	    ill = ill->ill_group_next) {
		if ((ill != save_ill) &&
		    !(ill->ill_phyint->phyint_flags &
		    (PHYI_FAILED|PHYI_INACTIVE|PHYI_OFFLINE))) {
			illgrp->illgrp_ill_schednext = ill;
			return;
		}
	}
}

/*
 * Given an ill, find the next ill in the group to be scheduled.
 * (This should be called by ip_newroute() before ire_create().)
 * The passed in ill may be pulled out of the group, after we have picked
 * up a different outgoing ill from the same group. However ire add will
 * atomically check this.
 */
ill_t *
illgrp_scheduler(ill_t *ill)
{
	ill_t *retill;
	ill_group_t *illgrp;
	int illcnt;
	int i;
	uint64_t flags;

	/*
	 * We don't use a lock to check for the ill_group. If this ill
	 * is currently being inserted we may end up just returning this
	 * ill itself. That is ok.
	 */
	if (ill->ill_group == NULL) {
		ill_refhold(ill);
		return (ill);
	}

	/*
	 * Grab the ill_g_lock as reader to make sure we are dealing with
	 * a set of stable ills. No ill can be added or deleted or change
	 * group while we hold the reader lock.
	 */
	rw_enter(&ill_g_lock, RW_READER);
	if ((illgrp = ill->ill_group) == NULL) {
		rw_exit(&ill_g_lock);
		ill_refhold(ill);
		return (ill);
	}

	illcnt = illgrp->illgrp_ill_count;
	mutex_enter(&illgrp->illgrp_lock);
	retill = illgrp->illgrp_ill_schednext;

	if (retill == NULL)
		retill = illgrp->illgrp_ill;

	/*
	 * We do a circular search beginning at illgrp_ill_schednext
	 * or illgrp_ill. We don't check the flags against the ill lock
	 * since it can change anytime. The ire creation will be atomic
	 * and will fail if the ill is FAILED or OFFLINE.
	 */
	for (i = 0; i < illcnt; i++) {
		flags = retill->ill_phyint->phyint_flags;

		if (!(flags & (PHYI_FAILED|PHYI_INACTIVE|PHYI_OFFLINE)) &&
		    ILL_CAN_LOOKUP(retill)) {
			illgrp->illgrp_ill_schednext = retill->ill_group_next;
			ill_refhold(retill);
			break;
		}
		retill = retill->ill_group_next;
		if (retill == NULL)
			retill = illgrp->illgrp_ill;
	}
	mutex_exit(&illgrp->illgrp_lock);
	rw_exit(&ill_g_lock);

	return (i == illcnt ? NULL : retill);
}

/*
 * Checks for availbility of a usable source address (if there is one) when the
 * destination ILL has the ill_usesrc_ifindex pointing to another ILL. Note
 * this selection is done regardless of the destination.
 */
boolean_t
ipif_usesrc_avail(ill_t *ill, zoneid_t zoneid)
{
	uint_t	ifindex;
	ipif_t	*ipif = NULL;
	ill_t	*uill;
	boolean_t isv6;

	ASSERT(ill != NULL);

	isv6 = ill->ill_isv6;
	ifindex = ill->ill_usesrc_ifindex;
	if (ifindex != 0) {
		uill = ill_lookup_on_ifindex(ifindex, isv6, NULL, NULL, NULL,
		    NULL);
		if (uill == NULL)
			return (NULL);
		mutex_enter(&uill->ill_lock);
		for (ipif = uill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (!IPIF_CAN_LOOKUP(ipif))
				continue;
			if (ipif->ipif_flags & (IPIF_NOLOCAL|IPIF_ANYCAST))
				continue;
			if (!(ipif->ipif_flags & IPIF_UP))
				continue;
			if (ipif->ipif_zoneid != zoneid)
				continue;
			if ((isv6 &&
			    IN6_IS_ADDR_UNSPECIFIED(&ipif->ipif_v6lcl_addr)) ||
			    (ipif->ipif_lcl_addr == INADDR_ANY))
				continue;
			mutex_exit(&uill->ill_lock);
			ill_refrele(uill);
			return (B_TRUE);
		}
		mutex_exit(&uill->ill_lock);
		ill_refrele(uill);
	}
	return (B_FALSE);
}

/*
 * Determine the best source address given a destination address and an ill.
 * Prefers non-deprecated over deprecated but will return a deprecated
 * address if there is no other choice. If there is a usable source address
 * on the interface pointed to by ill_usesrc_ifindex then that is given
 * first preference.
 *
 * Returns NULL if there is no suitable source address for the ill.
 * This only occurs when there is no valid source address for the ill.
 */
ipif_t *
ipif_select_source(ill_t *ill, ipaddr_t dst, zoneid_t zoneid)
{
	ipif_t *ipif;
	ipif_t *ipif_dep = NULL;	/* Fallback to deprecated */
	ipif_t *ipif_arr[MAX_IPIF_SELECT_SOURCE];
	int index = 0;
	boolean_t wrapped = B_FALSE;
	boolean_t same_subnet_only = B_FALSE;
	boolean_t ipif_same_found, ipif_other_found;
	boolean_t specific_found;
	ill_t	*till, *usill = NULL;
	tsol_tpc_t *src_rhtp, *dst_rhtp;

	if (ill->ill_usesrc_ifindex != 0) {
		usill = ill_lookup_on_ifindex(ill->ill_usesrc_ifindex, B_FALSE,
		    NULL, NULL, NULL, NULL);
		if (usill != NULL)
			ill = usill;	/* Select source from usesrc ILL */
		else
			return (NULL);
	}

	/*
	 * If we're dealing with an unlabeled destination on a labeled system,
	 * make sure that we ignore source addresses that are incompatible with
	 * the destination's default label.  That destination's default label
	 * must dominate the minimum label on the source address.
	 */
	dst_rhtp = NULL;
	if (is_system_labeled()) {
		dst_rhtp = find_tpc(&dst, IPV4_VERSION, B_FALSE);
		if (dst_rhtp == NULL)
			return (NULL);
		if (dst_rhtp->tpc_tp.host_type != UNLABELED) {
			TPC_RELE(dst_rhtp);
			dst_rhtp = NULL;
		}
	}

	/*
	 * Holds the ill_g_lock as reader. This makes sure that no ipif/ill
	 * can be deleted. But an ipif/ill can get CONDEMNED any time.
	 * After selecting the right ipif, under ill_lock make sure ipif is
	 * not condemned, and increment refcnt. If ipif is CONDEMNED,
	 * we retry. Inside the loop we still need to check for CONDEMNED,
	 * but not under a lock.
	 */
	rw_enter(&ill_g_lock, RW_READER);

retry:
	till = ill;
	ipif_arr[0] = NULL;

	if (till->ill_group != NULL)
		till = till->ill_group->illgrp_ill;

	/*
	 * Choose one good source address from each ill across the group.
	 * If possible choose a source address in the same subnet as
	 * the destination address.
	 *
	 * We don't check for PHYI_FAILED or PHYI_INACTIVE or PHYI_OFFLINE
	 * This is okay because of the following.
	 *
	 *    If PHYI_FAILED is set and we still have non-deprecated
	 *    addresses, it means the addresses have not yet been
	 *    failed over to a different interface. We potentially
	 *    select them to create IRE_CACHES, which will be later
	 *    flushed when the addresses move over.
	 *
	 *    If PHYI_INACTIVE is set and we still have non-deprecated
	 *    addresses, it means either the user has configured them
	 *    or PHYI_INACTIVE has not been cleared after the addresses
	 *    been moved over. For the former, in.mpathd does a failover
	 *    when the interface becomes INACTIVE and hence we should
	 *    not find them. Once INACTIVE is set, we don't allow them
	 *    to create logical interfaces anymore. For the latter, a
	 *    flush will happen when INACTIVE is cleared which will
	 *    flush the IRE_CACHES.
	 *
	 *    If PHYI_OFFLINE is set, all the addresses will be failed
	 *    over soon. We potentially select them to create IRE_CACHEs,
	 *    which will be later flushed when the addresses move over.
	 *
	 * NOTE : As ipif_select_source is called to borrow source address
	 * for an ipif that is part of a group, source address selection
	 * will be re-done whenever the group changes i.e either an
	 * insertion/deletion in the group.
	 *
	 * Fill ipif_arr[] with source addresses, using these rules:
	 *
	 *	1. At most one source address from a given ill ends up
	 *	   in ipif_arr[] -- that is, at most one of the ipif's
	 *	   associated with a given ill ends up in ipif_arr[].
	 *
	 *	2. If there is at least one non-deprecated ipif in the
	 *	   IPMP group with a source address on the same subnet as
	 *	   our destination, then fill ipif_arr[] only with
	 *	   source addresses on the same subnet as our destination.
	 *	   Note that because of (1), only the first
	 *	   non-deprecated ipif found with a source address
	 *	   matching the destination ends up in ipif_arr[].
	 *
	 *	3. Otherwise, fill ipif_arr[] with non-deprecated source
	 *	   addresses not in the same subnet as our destination.
	 *	   Again, because of (1), only the first off-subnet source
	 *	   address will be chosen.
	 *
	 *	4. If there are no non-deprecated ipifs, then just use
	 *	   the source address associated with the last deprecated
	 *	   one we find that happens to be on the same subnet,
	 *	   otherwise the first one not in the same subnet.
	 */
	specific_found = B_FALSE;
	for (; till != NULL; till = till->ill_group_next) {
		ipif_same_found = B_FALSE;
		ipif_other_found = B_FALSE;
		for (ipif = till->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (!IPIF_CAN_LOOKUP(ipif))
				continue;
			/* Always skip NOLOCAL and ANYCAST interfaces */
			if (ipif->ipif_flags & (IPIF_NOLOCAL|IPIF_ANYCAST))
				continue;
			if (!(ipif->ipif_flags & IPIF_UP) ||
			    !ipif->ipif_addr_ready)
				continue;
			if (ipif->ipif_zoneid != zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES)
				continue;
			/*
			 * Interfaces with 0.0.0.0 address are allowed to be UP,
			 * but are not valid as source addresses.
			 */
			if (ipif->ipif_lcl_addr == INADDR_ANY)
				continue;

			/*
			 * Check compatibility of local address for
			 * destination's default label if we're on a labeled
			 * system.  Incompatible addresses can't be used at
			 * all.
			 */
			if (dst_rhtp != NULL) {
				boolean_t incompat;

				src_rhtp = find_tpc(&ipif->ipif_lcl_addr,
				    IPV4_VERSION, B_FALSE);
				if (src_rhtp == NULL)
					continue;
				incompat =
				    src_rhtp->tpc_tp.host_type != SUN_CIPSO ||
				    src_rhtp->tpc_tp.tp_doi !=
				    dst_rhtp->tpc_tp.tp_doi ||
				    (!_blinrange(&dst_rhtp->tpc_tp.tp_def_label,
				    &src_rhtp->tpc_tp.tp_sl_range_cipso) &&
				    !blinlset(&dst_rhtp->tpc_tp.tp_def_label,
				    src_rhtp->tpc_tp.tp_sl_set_cipso));
				TPC_RELE(src_rhtp);
				if (incompat)
					continue;
			}

			/*
			 * We prefer not to use all all-zones addresses, if we
			 * can avoid it, as they pose problems with unlabeled
			 * destinations.
			 */
			if (ipif->ipif_zoneid != ALL_ZONES) {
				if (!specific_found &&
				    (!same_subnet_only ||
				    (ipif->ipif_net_mask & dst) ==
				    ipif->ipif_subnet)) {
					index = 0;
					specific_found = B_TRUE;
					ipif_other_found = B_FALSE;
				}
			} else {
				if (specific_found)
					continue;
			}
			if (ipif->ipif_flags & IPIF_DEPRECATED) {
				if (ipif_dep == NULL ||
				    (ipif->ipif_net_mask & dst) ==
				    ipif->ipif_subnet)
					ipif_dep = ipif;
				continue;
			}
			if ((ipif->ipif_net_mask & dst) == ipif->ipif_subnet) {
				/* found a source address in the same subnet */
				if (!same_subnet_only) {
					same_subnet_only = B_TRUE;
					index = 0;
				}
				ipif_same_found = B_TRUE;
			} else {
				if (same_subnet_only || ipif_other_found)
					continue;
				ipif_other_found = B_TRUE;
			}
			ipif_arr[index++] = ipif;
			if (index == MAX_IPIF_SELECT_SOURCE) {
				wrapped = B_TRUE;
				index = 0;
			}
			if (ipif_same_found)
				break;
		}
	}

	if (ipif_arr[0] == NULL) {
		ipif = ipif_dep;
	} else {
		if (wrapped)
			index = MAX_IPIF_SELECT_SOURCE;
		ipif = ipif_arr[ipif_rand() % index];
		ASSERT(ipif != NULL);
	}

	if (ipif != NULL) {
		mutex_enter(&ipif->ipif_ill->ill_lock);
		if (!IPIF_CAN_LOOKUP(ipif)) {
			mutex_exit(&ipif->ipif_ill->ill_lock);
			goto retry;
		}
		ipif_refhold_locked(ipif);
		mutex_exit(&ipif->ipif_ill->ill_lock);
	}

	rw_exit(&ill_g_lock);
	if (usill != NULL)
		ill_refrele(usill);
	if (dst_rhtp != NULL)
		TPC_RELE(dst_rhtp);

#ifdef DEBUG
	if (ipif == NULL) {
		char buf1[INET6_ADDRSTRLEN];

		ip1dbg(("ipif_select_source(%s, %s) -> NULL\n",
		    ill->ill_name,
		    inet_ntop(AF_INET, &dst, buf1, sizeof (buf1))));
	} else {
		char buf1[INET6_ADDRSTRLEN];
		char buf2[INET6_ADDRSTRLEN];

		ip1dbg(("ipif_select_source(%s, %s) -> %s\n",
		    ipif->ipif_ill->ill_name,
		    inet_ntop(AF_INET, &dst, buf1, sizeof (buf1)),
		    inet_ntop(AF_INET, &ipif->ipif_lcl_addr,
		    buf2, sizeof (buf2))));
	}
#endif /* DEBUG */
	return (ipif);
}


/*
 * If old_ipif is not NULL, see if ipif was derived from old
 * ipif and if so, recreate the interface route by re-doing
 * source address selection. This happens when ipif_down ->
 * ipif_update_other_ipifs calls us.
 *
 * If old_ipif is NULL, just redo the source address selection
 * if needed. This happens when illgrp_insert or ipif_up_done
 * calls us.
 */
static void
ipif_recreate_interface_routes(ipif_t *old_ipif, ipif_t *ipif)
{
	ire_t *ire;
	ire_t *ipif_ire;
	queue_t *stq;
	ipif_t *nipif;
	ill_t *ill;
	boolean_t need_rele = B_FALSE;

	ASSERT(old_ipif == NULL || IAM_WRITER_IPIF(old_ipif));
	ASSERT(IAM_WRITER_IPIF(ipif));

	ill = ipif->ipif_ill;
	if (!(ipif->ipif_flags &
	    (IPIF_NOLOCAL|IPIF_ANYCAST|IPIF_DEPRECATED))) {
		/*
		 * Can't possibly have borrowed the source
		 * from old_ipif.
		 */
		return;
	}

	/*
	 * Is there any work to be done? No work if the address
	 * is INADDR_ANY, loopback or NOLOCAL or ANYCAST (
	 * ipif_select_source() does not borrow addresses from
	 * NOLOCAL and ANYCAST interfaces).
	 */
	if ((old_ipif != NULL) &&
	    ((old_ipif->ipif_lcl_addr == INADDR_ANY) ||
	    (old_ipif->ipif_ill->ill_wq == NULL) ||
	    (old_ipif->ipif_flags &
	    (IPIF_NOLOCAL|IPIF_ANYCAST)))) {
		return;
	}

	/*
	 * Perform the same checks as when creating the
	 * IRE_INTERFACE in ipif_up_done.
	 */
	if (!(ipif->ipif_flags & IPIF_UP))
		return;

	if ((ipif->ipif_flags & IPIF_NOXMIT) ||
	    (ipif->ipif_subnet == INADDR_ANY))
		return;

	ipif_ire = ipif_to_ire(ipif);
	if (ipif_ire == NULL)
		return;

	/*
	 * We know that ipif uses some other source for its
	 * IRE_INTERFACE. Is it using the source of this
	 * old_ipif?
	 */
	if (old_ipif != NULL &&
	    old_ipif->ipif_lcl_addr != ipif_ire->ire_src_addr) {
		ire_refrele(ipif_ire);
		return;
	}
	if (ip_debug > 2) {
		/* ip1dbg */
		pr_addr_dbg("ipif_recreate_interface_routes: deleting IRE for"
		    " src %s\n", AF_INET, &ipif_ire->ire_src_addr);
	}

	stq = ipif_ire->ire_stq;

	/*
	 * Can't use our source address. Select a different
	 * source address for the IRE_INTERFACE.
	 */
	nipif = ipif_select_source(ill, ipif->ipif_subnet, ipif->ipif_zoneid);
	if (nipif == NULL) {
		/* Last resort - all ipif's have IPIF_NOLOCAL */
		nipif = ipif;
	} else {
		need_rele = B_TRUE;
	}

	ire = ire_create(
	    (uchar_t *)&ipif->ipif_subnet,	/* dest pref */
	    (uchar_t *)&ipif->ipif_net_mask,	/* mask */
	    (uchar_t *)&nipif->ipif_src_addr,	/* src addr */
	    NULL,				/* no gateway */
	    NULL,
	    &ipif->ipif_mtu,			/* max frag */
	    NULL,				/* fast path header */
	    NULL,				/* no recv from queue */
	    stq,				/* send-to queue */
	    ill->ill_net_type,			/* IF_[NO]RESOLVER */
	    ill->ill_resolver_mp,		/* xmit header */
	    ipif,
	    NULL,
	    0,
	    0,
	    0,
	    0,
	    &ire_uinfo_null,
	    NULL,
	    NULL);

	if (ire != NULL) {
		ire_t *ret_ire;
		int error;

		/*
		 * We don't need ipif_ire anymore. We need to delete
		 * before we add so that ire_add does not detect
		 * duplicates.
		 */
		ire_delete(ipif_ire);
		ret_ire = ire;
		error = ire_add(&ret_ire, NULL, NULL, NULL, B_FALSE);
		ASSERT(error == 0);
		ASSERT(ire == ret_ire);
		/* Held in ire_add */
		ire_refrele(ret_ire);
	}
	/*
	 * Either we are falling through from above or could not
	 * allocate a replacement.
	 */
	ire_refrele(ipif_ire);
	if (need_rele)
		ipif_refrele(nipif);
}

/*
 * This old_ipif is going away.
 *
 * Determine if any other ipif's is using our address as
 * ipif_lcl_addr (due to those being IPIF_NOLOCAL, IPIF_ANYCAST, or
 * IPIF_DEPRECATED).
 * Find the IRE_INTERFACE for such ipifs and recreate them
 * to use an different source address following the rules in
 * ipif_up_done.
 *
 * This function takes an illgrp as an argument so that illgrp_delete
 * can call this to update source address even after deleting the
 * old_ipif->ipif_ill from the ill group.
 */
static void
ipif_update_other_ipifs(ipif_t *old_ipif, ill_group_t *illgrp)
{
	ipif_t *ipif;
	ill_t *ill;
	char	buf[INET6_ADDRSTRLEN];

	ASSERT(IAM_WRITER_IPIF(old_ipif));
	ASSERT(illgrp == NULL || IAM_WRITER_IPIF(old_ipif));

	ill = old_ipif->ipif_ill;

	ip1dbg(("ipif_update_other_ipifs(%s, %s)\n",
	    ill->ill_name,
	    inet_ntop(AF_INET, &old_ipif->ipif_lcl_addr,
	    buf, sizeof (buf))));
	/*
	 * If this part of a group, look at all ills as ipif_select_source
	 * borrows source address across all the ills in the group.
	 */
	if (illgrp != NULL)
		ill = illgrp->illgrp_ill;

	for (; ill != NULL; ill = ill->ill_group_next) {
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {

			if (ipif == old_ipif)
				continue;

			ipif_recreate_interface_routes(old_ipif, ipif);
		}
	}
}

/* ARGSUSED */
int
if_unitsel_restart(ipif_t *ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
	ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	/*
	 * ill_phyint_reinit merged the v4 and v6 into a single
	 * ipsq. Could also have become part of a ipmp group in the
	 * process, and we might not have been able to complete the
	 * operation in ipif_set_values, if we could not become
	 * exclusive.  If so restart it here.
	 */
	return (ipif_set_values_tail(ipif->ipif_ill, ipif, mp, q));
}


/* ARGSUSED */
int
if_unitsel(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	queue_t		*q1 = q;
	char 		*cp;
	char		interf_name[LIFNAMSIZ];
	uint_t		ppa = *(uint_t *)mp->b_cont->b_cont->b_rptr;

	if (!q->q_next) {
		ip1dbg((
		    "if_unitsel: IF_UNITSEL: no q_next\n"));
		return (EINVAL);
	}

	if (((ill_t *)(q->q_ptr))->ill_name[0] != '\0')
		return (EALREADY);

	do {
		q1 = q1->q_next;
	} while (q1->q_next);
	cp = q1->q_qinfo->qi_minfo->mi_idname;
	(void) sprintf(interf_name, "%s%d", cp, ppa);

	/*
	 * Here we are not going to delay the ioack until after
	 * ACKs from DL_ATTACH_REQ/DL_BIND_REQ. So no need to save the
	 * original ioctl message before sending the requests.
	 */
	return (ipif_set_values(q, mp, interf_name, &ppa));
}

/* ARGSUSED */
int
ip_sioctl_sifname(ipif_t *dummy_ipif, sin_t *dummy_sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *dummy_ifreq)
{
	return (ENXIO);
}

/*
 * Net and subnet broadcast ire's are now specific to the particular
 * physical interface (ill) and not to any one locigal interface (ipif).
 * However, if a particular logical interface is being taken down, it's
 * associated ire's will be taken down as well.  Hence, when we go to
 * take down or change the local address, broadcast address or netmask
 * of a specific logical interface, we must check to make sure that we
 * have valid net and subnet broadcast ire's for the other logical
 * interfaces which may have been shared with the logical interface
 * being brought down or changed.
 *
 * There is one set of 0.0.0.0 and 255.255.255.255 per ill. Usually it
 * is tied to the first interface coming UP. If that ipif is going down,
 * we need to recreate them on the next valid ipif.
 *
 * Note: assume that the ipif passed in is still up so that it's IRE
 * entries are still valid.
 */
static void
ipif_check_bcast_ires(ipif_t *test_ipif)
{
	ipif_t	*ipif;
	ire_t	*test_subnet_ire, *test_net_ire;
	ire_t	*test_allzero_ire, *test_allone_ire;
	ire_t	*ire_array[12];
	ire_t	**irep = &ire_array[0];
	ire_t	**irep1;

	ipaddr_t net_addr, subnet_addr, net_mask, subnet_mask;
	ipaddr_t test_net_addr, test_subnet_addr;
	ipaddr_t test_net_mask, test_subnet_mask;
	boolean_t need_net_bcast_ire = B_FALSE;
	boolean_t need_subnet_bcast_ire = B_FALSE;
	boolean_t allzero_bcast_ire_created = B_FALSE;
	boolean_t allone_bcast_ire_created = B_FALSE;
	boolean_t net_bcast_ire_created = B_FALSE;
	boolean_t subnet_bcast_ire_created = B_FALSE;

	ipif_t  *backup_ipif_net = (ipif_t *)NULL;
	ipif_t  *backup_ipif_subnet = (ipif_t *)NULL;
	ipif_t  *backup_ipif_allzeros = (ipif_t *)NULL;
	ipif_t  *backup_ipif_allones = (ipif_t *)NULL;
	uint64_t check_flags = IPIF_DEPRECATED | IPIF_NOLOCAL | IPIF_ANYCAST;

	ASSERT(!test_ipif->ipif_isv6);
	ASSERT(IAM_WRITER_IPIF(test_ipif));

	/*
	 * No broadcast IREs for the LOOPBACK interface
	 * or others such as point to point and IPIF_NOXMIT.
	 */
	if (!(test_ipif->ipif_flags & IPIF_BROADCAST) ||
	    (test_ipif->ipif_flags & IPIF_NOXMIT))
		return;

	test_allzero_ire = ire_ctable_lookup(0, 0, IRE_BROADCAST,
	    test_ipif, ALL_ZONES, NULL, (MATCH_IRE_TYPE | MATCH_IRE_IPIF));

	test_allone_ire = ire_ctable_lookup(INADDR_BROADCAST, 0, IRE_BROADCAST,
	    test_ipif, ALL_ZONES, NULL, (MATCH_IRE_TYPE | MATCH_IRE_IPIF));

	test_net_mask = ip_net_mask(test_ipif->ipif_subnet);
	test_subnet_mask = test_ipif->ipif_net_mask;

	/*
	 * If no net mask set, assume the default based on net class.
	 */
	if (test_subnet_mask == 0)
		test_subnet_mask = test_net_mask;

	/*
	 * Check if there is a network broadcast ire associated with this ipif
	 */
	test_net_addr = test_net_mask  & test_ipif->ipif_subnet;
	test_net_ire = ire_ctable_lookup(test_net_addr, 0, IRE_BROADCAST,
	    test_ipif, ALL_ZONES, NULL, (MATCH_IRE_TYPE | MATCH_IRE_IPIF));

	/*
	 * Check if there is a subnet broadcast IRE associated with this ipif
	 */
	test_subnet_addr = test_subnet_mask  & test_ipif->ipif_subnet;
	test_subnet_ire = ire_ctable_lookup(test_subnet_addr, 0, IRE_BROADCAST,
	    test_ipif, ALL_ZONES, NULL, (MATCH_IRE_TYPE | MATCH_IRE_IPIF));

	/*
	 * No broadcast ire's associated with this ipif.
	 */
	if ((test_subnet_ire == NULL) && (test_net_ire == NULL) &&
	    (test_allzero_ire == NULL) && (test_allone_ire == NULL)) {
		return;
	}

	/*
	 * We have established which bcast ires have to be replaced.
	 * Next we try to locate ipifs that match there ires.
	 * The rules are simple: If we find an ipif that matches on the subnet
	 * address it will also match on the net address, the allzeros and
	 * allones address. Any ipif that matches only on the net address will
	 * also match the allzeros and allones addresses.
	 * The other criterion is the ipif_flags. We look for non-deprecated
	 * (and non-anycast and non-nolocal) ipifs as the best choice.
	 * ipifs with check_flags matching (deprecated, etc) are used only
	 * if good ipifs are not available. While looping, we save existing
	 * deprecated ipifs as backup_ipif.
	 * We loop through all the ipifs for this ill looking for ipifs
	 * whose broadcast addr match the ipif passed in, but do not have
	 * their own broadcast ires. For creating 0.0.0.0 and
	 * 255.255.255.255 we just need an ipif on this ill to create.
	 */
	for (ipif = test_ipif->ipif_ill->ill_ipif; ipif != NULL;
	    ipif = ipif->ipif_next) {

		ASSERT(!ipif->ipif_isv6);
		/*
		 * Already checked the ipif passed in.
		 */
		if (ipif == test_ipif) {
			continue;
		}

		/*
		 * We only need to recreate broadcast ires if another ipif in
		 * the same zone uses them. The new ires must be created in the
		 * same zone.
		 */
		if (ipif->ipif_zoneid != test_ipif->ipif_zoneid) {
			continue;
		}

		/*
		 * Only interested in logical interfaces with valid local
		 * addresses or with the ability to broadcast.
		 */
		if ((ipif->ipif_subnet == 0) ||
		    !(ipif->ipif_flags & IPIF_BROADCAST) ||
		    (ipif->ipif_flags & IPIF_NOXMIT) ||
		    !(ipif->ipif_flags & IPIF_UP)) {
			continue;
		}
		/*
		 * Check if there is a net broadcast ire for this
		 * net address.  If it turns out that the ipif we are
		 * about to take down owns this ire, we must make a
		 * new one because it is potentially going away.
		 */
		if (test_net_ire && (!net_bcast_ire_created)) {
			net_mask = ip_net_mask(ipif->ipif_subnet);
			net_addr = net_mask & ipif->ipif_subnet;
			if (net_addr == test_net_addr) {
				need_net_bcast_ire = B_TRUE;
				/*
				 * Use DEPRECATED ipif only if no good
				 * ires are available. subnet_addr is
				 * a better match than net_addr.
				 */
				if ((ipif->ipif_flags & check_flags) &&
				    (backup_ipif_net == NULL)) {
					backup_ipif_net = ipif;
				}
			}
		}
		/*
		 * Check if there is a subnet broadcast ire for this
		 * net address.  If it turns out that the ipif we are
		 * about to take down owns this ire, we must make a
		 * new one because it is potentially going away.
		 */
		if (test_subnet_ire && (!subnet_bcast_ire_created)) {
			subnet_mask = ipif->ipif_net_mask;
			subnet_addr = ipif->ipif_subnet;
			if (subnet_addr == test_subnet_addr) {
				need_subnet_bcast_ire = B_TRUE;
				if ((ipif->ipif_flags & check_flags) &&
				    (backup_ipif_subnet == NULL)) {
					backup_ipif_subnet = ipif;
				}
			}
		}


		/* Short circuit here if this ipif is deprecated */
		if (ipif->ipif_flags & check_flags) {
			if ((test_allzero_ire != NULL) &&
			    (!allzero_bcast_ire_created) &&
			    (backup_ipif_allzeros == NULL)) {
				backup_ipif_allzeros = ipif;
			}
			if ((test_allone_ire != NULL) &&
			    (!allone_bcast_ire_created) &&
			    (backup_ipif_allones == NULL)) {
				backup_ipif_allones = ipif;
			}
			continue;
		}

		/*
		 * Found an ipif which has the same broadcast ire as the
		 * ipif passed in and the ipif passed in "owns" the ire.
		 * Create new broadcast ire's for this broadcast addr.
		 */
		if (need_net_bcast_ire && !net_bcast_ire_created) {
			irep = ire_create_bcast(ipif, net_addr, irep);
			irep = ire_create_bcast(ipif,
			    ~net_mask | net_addr, irep);
			net_bcast_ire_created = B_TRUE;
		}
		if (need_subnet_bcast_ire && !subnet_bcast_ire_created) {
			irep = ire_create_bcast(ipif, subnet_addr, irep);
			irep = ire_create_bcast(ipif,
			    ~subnet_mask | subnet_addr, irep);
			subnet_bcast_ire_created = B_TRUE;
		}
		if (test_allzero_ire != NULL && !allzero_bcast_ire_created) {
			irep = ire_create_bcast(ipif, 0, irep);
			allzero_bcast_ire_created = B_TRUE;
		}
		if (test_allone_ire != NULL && !allone_bcast_ire_created) {
			irep = ire_create_bcast(ipif, INADDR_BROADCAST, irep);
			allone_bcast_ire_created = B_TRUE;
		}
		/*
		 * Once we have created all the appropriate ires, we
		 * just break out of this loop to add what we have created.
		 * This has been indented similar to ire_match_args for
		 * readability.
		 */
		if (((test_net_ire == NULL) ||
			(net_bcast_ire_created)) &&
		    ((test_subnet_ire == NULL) ||
			(subnet_bcast_ire_created)) &&
		    ((test_allzero_ire == NULL) ||
			(allzero_bcast_ire_created)) &&
		    ((test_allone_ire == NULL) ||
			(allone_bcast_ire_created))) {
			break;
		}
	}

	/*
	 * Create bcast ires on deprecated ipifs if no non-deprecated ipifs
	 * exist. 6 pairs of bcast ires are needed.
	 * Note - the old ires are deleted in ipif_down.
	 */
	if (need_net_bcast_ire && !net_bcast_ire_created && backup_ipif_net) {
		ipif = backup_ipif_net;
		irep = ire_create_bcast(ipif, net_addr, irep);
		irep = ire_create_bcast(ipif, ~net_mask | net_addr, irep);
		net_bcast_ire_created = B_TRUE;
	}
	if (need_subnet_bcast_ire && !subnet_bcast_ire_created &&
	    backup_ipif_subnet) {
		ipif = backup_ipif_subnet;
		irep = ire_create_bcast(ipif, subnet_addr, irep);
		irep = ire_create_bcast(ipif,
		    ~subnet_mask | subnet_addr, irep);
		subnet_bcast_ire_created = B_TRUE;
	}
	if (test_allzero_ire != NULL && !allzero_bcast_ire_created &&
	    backup_ipif_allzeros) {
		irep = ire_create_bcast(backup_ipif_allzeros, 0, irep);
		allzero_bcast_ire_created = B_TRUE;
	}
	if (test_allone_ire != NULL && !allone_bcast_ire_created &&
	    backup_ipif_allones) {
		irep = ire_create_bcast(backup_ipif_allones,
		    INADDR_BROADCAST, irep);
		allone_bcast_ire_created = B_TRUE;
	}

	/*
	 * If we can't create all of them, don't add any of them.
	 * Code in ip_wput_ire and ire_to_ill assumes that we
	 * always have a non-loopback copy and loopback copy
	 * for a given address.
	 */
	for (irep1 = irep; irep1 > ire_array; ) {
		irep1--;
		if (*irep1 == NULL) {
			ip0dbg(("ipif_check_bcast_ires: can't create "
			    "IRE_BROADCAST, memory allocation failure\n"));
			while (irep > ire_array) {
				irep--;
				if (*irep != NULL)
					ire_delete(*irep);
			}
			goto bad;
		}
	}
	for (irep1 = irep; irep1 > ire_array; ) {
		int error;

		irep1--;
		error = ire_add(irep1, NULL, NULL, NULL, B_FALSE);
		if (error == 0) {
			ire_refrele(*irep1);		/* Held in ire_add */
		}
	}
bad:
	if (test_allzero_ire != NULL)
		ire_refrele(test_allzero_ire);
	if (test_allone_ire != NULL)
		ire_refrele(test_allone_ire);
	if (test_net_ire != NULL)
		ire_refrele(test_net_ire);
	if (test_subnet_ire != NULL)
		ire_refrele(test_subnet_ire);
}

/*
 * Extract both the flags (including IFF_CANTCHANGE) such as IFF_IPV*
 * from lifr_flags and the name from lifr_name.
 * Set IFF_IPV* and ill_isv6 prior to doing the lookup
 * since ipif_lookup_on_name uses the _isv6 flags when matching.
 * Returns EINPROGRESS when mp has been consumed by queueing it on
 * ill_pending_mp and the ioctl will complete in ip_rput.
 */
/* ARGSUSED */
int
ip_sioctl_slifname(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	int	err;
	ill_t	*ill;
	struct lifreq *lifr = (struct lifreq *)if_req;

	ASSERT(ipif != NULL);
	ip1dbg(("ip_sioctl_slifname %s\n", lifr->lifr_name));
	ASSERT(q->q_next != NULL);

	ill = (ill_t *)q->q_ptr;
	/*
	 * If we are not writer on 'q' then this interface exists already
	 * and previous lookups (ipif_extract_lifreq_cmn) found this ipif.
	 * So return EALREADY
	 */
	if (ill != ipif->ipif_ill)
		return (EALREADY);

	if (ill->ill_name[0] != '\0')
		return (EALREADY);

	/*
	 * Set all the flags. Allows all kinds of override. Provide some
	 * sanity checking by not allowing IFF_BROADCAST and IFF_MULTICAST
	 * unless there is either multicast/broadcast support in the driver
	 * or it is a pt-pt link.
	 */
	if (lifr->lifr_flags & (IFF_PROMISC|IFF_ALLMULTI)) {
		/* Meaningless to IP thus don't allow them to be set. */
		ip1dbg(("ip_setname: EINVAL 1\n"));
		return (EINVAL);
	}
	/*
	 * For a DL_STYLE2 driver (ill_needs_attach), we would not have the
	 * ill_bcast_addr_length info.
	 */
	if (!ill->ill_needs_attach &&
	    ((lifr->lifr_flags & IFF_MULTICAST) &&
	    !(lifr->lifr_flags & IFF_POINTOPOINT) &&
	    ill->ill_bcast_addr_length == 0)) {
		/* Link not broadcast/pt-pt capable i.e. no multicast */
		ip1dbg(("ip_setname: EINVAL 2\n"));
		return (EINVAL);
	}
	if ((lifr->lifr_flags & IFF_BROADCAST) &&
	    ((lifr->lifr_flags & IFF_IPV6) ||
	    (!ill->ill_needs_attach && ill->ill_bcast_addr_length == 0))) {
		/* Link not broadcast capable or IPv6 i.e. no broadcast */
		ip1dbg(("ip_setname: EINVAL 3\n"));
		return (EINVAL);
	}
	if (lifr->lifr_flags & IFF_UP) {
		/* Can only be set with SIOCSLIFFLAGS */
		ip1dbg(("ip_setname: EINVAL 4\n"));
		return (EINVAL);
	}
	if ((lifr->lifr_flags & (IFF_IPV6|IFF_IPV4)) != IFF_IPV6 &&
	    (lifr->lifr_flags & (IFF_IPV6|IFF_IPV4)) != IFF_IPV4) {
		ip1dbg(("ip_setname: EINVAL 5\n"));
		return (EINVAL);
	}
	/*
	 * Only allow the IFF_XRESOLV flag to be set on IPv6 interfaces.
	 */
	if ((lifr->lifr_flags & IFF_XRESOLV) &&
	    !(lifr->lifr_flags & IFF_IPV6) &&
	    !(ipif->ipif_isv6)) {
		ip1dbg(("ip_setname: EINVAL 6\n"));
		return (EINVAL);
	}

	/*
	 * The user has done SIOCGLIFFLAGS prior to this ioctl and hence
	 * we have all the flags here. So, we assign rather than we OR.
	 * We can't OR the flags here because we don't want to set
	 * both IFF_IPV4 and IFF_IPV6. We start off as IFF_IPV4 in
	 * ipif_allocate and become IFF_IPV4 or IFF_IPV6 here depending
	 * on lifr_flags value here.
	 */
	/*
	 * This ill has not been inserted into the global list.
	 * So we are still single threaded and don't need any lock
	 */
	ipif->ipif_flags = lifr->lifr_flags & IFF_LOGINT_FLAGS &
	    ~IFF_DUPLICATE;
	ill->ill_flags = lifr->lifr_flags & IFF_PHYINTINST_FLAGS;
	ill->ill_phyint->phyint_flags = lifr->lifr_flags & IFF_PHYINT_FLAGS;

	/* We started off as V4. */
	if (ill->ill_flags & ILLF_IPV6) {
		ill->ill_phyint->phyint_illv6 = ill;
		ill->ill_phyint->phyint_illv4 = NULL;
	}
	err = ipif_set_values(q, mp, lifr->lifr_name, &lifr->lifr_ppa);
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_slifname_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	/*
	 * ill_phyint_reinit merged the v4 and v6 into a single
	 * ipsq. Could also have become part of a ipmp group in the
	 * process, and we might not have been able to complete the
	 * slifname in ipif_set_values, if we could not become
	 * exclusive.  If so restart it here
	 */
	return (ipif_set_values_tail(ipif->ipif_ill, ipif, mp, q));
}

/*
 * Return a pointer to the ipif which matches the index, IP version type and
 * zoneid.
 */
ipif_t *
ipif_lookup_on_ifindex(uint_t index, boolean_t isv6, zoneid_t zoneid,
    queue_t *q, mblk_t *mp, ipsq_func_t func, int *err)
{
	ill_t	*ill;
	ipsq_t  *ipsq;
	phyint_t *phyi;
	ipif_t	*ipif;

	ASSERT((q == NULL && mp == NULL && func == NULL && err == NULL) ||
	    (q != NULL && mp != NULL && func != NULL && err != NULL));

	if (err != NULL)
		*err = 0;

	/*
	 * Indexes are stored in the phyint - a common structure
	 * to both IPv4 and IPv6.
	 */

	rw_enter(&ill_g_lock, RW_READER);
	phyi = avl_find(&phyint_g_list.phyint_list_avl_by_index,
	    (void *) &index, NULL);
	if (phyi != NULL) {
		ill = isv6 ? phyi->phyint_illv6 : phyi->phyint_illv4;
		if (ill == NULL) {
			rw_exit(&ill_g_lock);
			if (err != NULL)
				*err = ENXIO;
			return (NULL);
		}
		GRAB_CONN_LOCK(q);
		mutex_enter(&ill->ill_lock);
		if (ILL_CAN_LOOKUP(ill)) {
			for (ipif = ill->ill_ipif; ipif != NULL;
			    ipif = ipif->ipif_next) {
				if (IPIF_CAN_LOOKUP(ipif) &&
				    (zoneid == ALL_ZONES ||
				    zoneid == ipif->ipif_zoneid ||
				    ipif->ipif_zoneid == ALL_ZONES)) {
					ipif_refhold_locked(ipif);
					mutex_exit(&ill->ill_lock);
					RELEASE_CONN_LOCK(q);
					rw_exit(&ill_g_lock);
					return (ipif);
				}
			}
		} else if (ILL_CAN_WAIT(ill, q)) {
			ipsq = ill->ill_phyint->phyint_ipsq;
			mutex_enter(&ipsq->ipsq_lock);
			rw_exit(&ill_g_lock);
			mutex_exit(&ill->ill_lock);
			ipsq_enq(ipsq, q, mp, func, NEW_OP, ill);
			mutex_exit(&ipsq->ipsq_lock);
			RELEASE_CONN_LOCK(q);
			*err = EINPROGRESS;
			return (NULL);
		}
		mutex_exit(&ill->ill_lock);
		RELEASE_CONN_LOCK(q);
	}
	rw_exit(&ill_g_lock);
	if (err != NULL)
		*err = ENXIO;
	return (NULL);
}

typedef struct conn_change_s {
	uint_t cc_old_ifindex;
	uint_t cc_new_ifindex;
} conn_change_t;

/*
 * ipcl_walk function for changing interface index.
 */
static void
conn_change_ifindex(conn_t *connp, caddr_t arg)
{
	conn_change_t *connc;
	uint_t old_ifindex;
	uint_t new_ifindex;
	int i;
	ilg_t *ilg;

	connc = (conn_change_t *)arg;
	old_ifindex = connc->cc_old_ifindex;
	new_ifindex = connc->cc_new_ifindex;

	if (connp->conn_orig_bound_ifindex == old_ifindex)
		connp->conn_orig_bound_ifindex = new_ifindex;

	if (connp->conn_orig_multicast_ifindex == old_ifindex)
		connp->conn_orig_multicast_ifindex = new_ifindex;

	if (connp->conn_orig_xmit_ifindex == old_ifindex)
		connp->conn_orig_xmit_ifindex = new_ifindex;

	for (i = connp->conn_ilg_inuse - 1; i >= 0; i--) {
		ilg = &connp->conn_ilg[i];
		if (ilg->ilg_orig_ifindex == old_ifindex)
			ilg->ilg_orig_ifindex = new_ifindex;
	}
}

/*
 * Walk all the ipifs and ilms on this ill and change the orig_ifindex
 * to new_index if it matches the old_index.
 *
 * Failovers typically happen within a group of ills. But somebody
 * can remove an ill from the group after a failover happened. If
 * we are setting the ifindex after this, we potentially need to
 * look at all the ills rather than just the ones in the group.
 * We cut down the work by looking at matching ill_net_types
 * and ill_types as we could not possibly grouped them together.
 */
static void
ip_change_ifindex(ill_t *ill_orig, conn_change_t *connc)
{
	ill_t *ill;
	ipif_t *ipif;
	uint_t old_ifindex;
	uint_t new_ifindex;
	ilm_t *ilm;
	ill_walk_context_t ctx;

	old_ifindex = connc->cc_old_ifindex;
	new_ifindex = connc->cc_new_ifindex;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_ALL(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		if ((ill_orig->ill_net_type != ill->ill_net_type) ||
			(ill_orig->ill_type != ill->ill_type)) {
			continue;
		}
		for (ipif = ill->ill_ipif; ipif != NULL;
				ipif = ipif->ipif_next) {
			if (ipif->ipif_orig_ifindex == old_ifindex)
				ipif->ipif_orig_ifindex = new_ifindex;
		}
		for (ilm = ill->ill_ilm; ilm != NULL; ilm = ilm->ilm_next) {
			if (ilm->ilm_orig_ifindex == old_ifindex)
				ilm->ilm_orig_ifindex = new_ifindex;
		}
	}
	rw_exit(&ill_g_lock);
}

/*
 * We first need to ensure that the new index is unique, and
 * then carry the change across both v4 and v6 ill representation
 * of the physical interface.
 */
/* ARGSUSED */
int
ip_sioctl_slifindex(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	ill_t		*ill;
	ill_t		*ill_other;
	phyint_t	*phyi;
	int		old_index;
	conn_change_t	connc;
	struct ifreq	*ifr = (struct ifreq *)ifreq;
	struct lifreq	*lifr = (struct lifreq *)ifreq;
	uint_t	index;
	ill_t	*ill_v4;
	ill_t	*ill_v6;

	if (ipip->ipi_cmd_type == IF_CMD)
		index = ifr->ifr_index;
	else
		index = lifr->lifr_index;

	/*
	 * Only allow on physical interface. Also, index zero is illegal.
	 *
	 * Need to check for PHYI_FAILED and PHYI_INACTIVE
	 *
	 * 1) If PHYI_FAILED is set, a failover could have happened which
	 *    implies a possible failback might have to happen. As failback
	 *    depends on the old index, we should fail setting the index.
	 *
	 * 2) If PHYI_INACTIVE is set, in.mpathd does a failover so that
	 *    any addresses or multicast memberships are failed over to
	 *    a non-STANDBY interface. As failback depends on the old
	 *    index, we should fail setting the index for this case also.
	 *
	 * 3) If PHYI_OFFLINE is set, a possible failover has happened.
	 *    Be consistent with PHYI_FAILED and fail the ioctl.
	 */
	ill = ipif->ipif_ill;
	phyi = ill->ill_phyint;
	if ((phyi->phyint_flags & (PHYI_FAILED|PHYI_INACTIVE|PHYI_OFFLINE)) ||
	    ipif->ipif_id != 0 || index == 0) {
		return (EINVAL);
	}
	old_index = phyi->phyint_ifindex;

	/* If the index is not changing, no work to do */
	if (old_index == index)
		return (0);

	/*
	 * Use ill_lookup_on_ifindex to determine if the
	 * new index is unused and if so allow the change.
	 */
	ill_v6 = ill_lookup_on_ifindex(index, B_TRUE, NULL, NULL, NULL, NULL);
	ill_v4 = ill_lookup_on_ifindex(index, B_FALSE, NULL, NULL, NULL, NULL);
	if (ill_v6 != NULL || ill_v4 != NULL) {
		if (ill_v4 != NULL)
			ill_refrele(ill_v4);
		if (ill_v6 != NULL)
			ill_refrele(ill_v6);
		return (EBUSY);
	}

	/*
	 * The new index is unused. Set it in the phyint.
	 * Locate the other ill so that we can send a routing
	 * sockets message.
	 */
	if (ill->ill_isv6) {
		ill_other = phyi->phyint_illv4;
	} else {
		ill_other = phyi->phyint_illv6;
	}

	phyi->phyint_ifindex = index;

	connc.cc_old_ifindex = old_index;
	connc.cc_new_ifindex = index;
	ip_change_ifindex(ill, &connc);
	ipcl_walk(conn_change_ifindex, (caddr_t)&connc);

	/* Send the routing sockets message */
	ip_rts_ifmsg(ipif);
	if (ill_other != NULL)
		ip_rts_ifmsg(ill_other->ill_ipif);

	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_lifindex(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct ifreq	*ifr = (struct ifreq *)ifreq;
	struct lifreq	*lifr = (struct lifreq *)ifreq;

	ip1dbg(("ip_sioctl_get_lifindex(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/* Get the interface index */
	if (ipip->ipi_cmd_type == IF_CMD) {
		ifr->ifr_index = ipif->ipif_ill->ill_phyint->phyint_ifindex;
	} else {
		lifr->lifr_index = ipif->ipif_ill->ill_phyint->phyint_ifindex;
	}
	return (0);
}

/* ARGSUSED */
int
ip_sioctl_get_lifzone(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifreq	*lifr = (struct lifreq *)ifreq;

	ip1dbg(("ip_sioctl_get_lifzone(%s:%u %p)\n",
		ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	/* Get the interface zone */
	ASSERT(ipip->ipi_cmd_type == LIF_CMD);
	lifr->lifr_zoneid = ipif->ipif_zoneid;
	return (0);
}

/*
 * Set the zoneid of an interface.
 */
/* ARGSUSED */
int
ip_sioctl_slifzone(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifreq	*lifr = (struct lifreq *)ifreq;
	int err = 0;
	boolean_t need_up = B_FALSE;
	zone_t *zptr;
	zone_status_t status;
	zoneid_t zoneid;

	ASSERT(ipip->ipi_cmd_type == LIF_CMD);
	if ((zoneid = lifr->lifr_zoneid) == ALL_ZONES) {
		if (!is_system_labeled())
			return (ENOTSUP);
		zoneid = GLOBAL_ZONEID;
	}

	/* cannot assign instance zero to a non-global zone */
	if (ipif->ipif_id == 0 && zoneid != GLOBAL_ZONEID)
		return (ENOTSUP);

	/*
	 * Cannot assign to a zone that doesn't exist or is shutting down.  In
	 * the event of a race with the zone shutdown processing, since IP
	 * serializes this ioctl and SIOCGLIFCONF/SIOCLIFREMOVEIF, we know the
	 * interface will be cleaned up even if the zone is shut down
	 * immediately after the status check. If the interface can't be brought
	 * down right away, and the zone is shut down before the restart
	 * function is called, we resolve the possible races by rechecking the
	 * zone status in the restart function.
	 */
	if ((zptr = zone_find_by_id(zoneid)) == NULL)
		return (EINVAL);
	status = zone_status_get(zptr);
	zone_rele(zptr);

	if (status != ZONE_IS_READY && status != ZONE_IS_RUNNING)
		return (EINVAL);

	if (ipif->ipif_flags & IPIF_UP) {
		/*
		 * If the interface is already marked up,
		 * we call ipif_down which will take care
		 * of ditching any IREs that have been set
		 * up based on the old interface address.
		 */
		err = ipif_logical_down(ipif, q, mp);
		if (err == EINPROGRESS)
			return (err);
		ipif_down_tail(ipif);
		need_up = B_TRUE;
	}

	err = ip_sioctl_slifzone_tail(ipif, lifr->lifr_zoneid, q, mp, need_up);
	return (err);
}

static int
ip_sioctl_slifzone_tail(ipif_t *ipif, zoneid_t zoneid,
    queue_t *q, mblk_t *mp, boolean_t need_up)
{
	int	err = 0;

	ip1dbg(("ip_sioctl_zoneid_tail(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	/* Set the new zone id. */
	ipif->ipif_zoneid = zoneid;

	/* Update sctp list */
	sctp_update_ipif(ipif, SCTP_IPIF_UPDATE);

	if (need_up) {
		/*
		 * Now bring the interface back up.  If this
		 * is the only IPIF for the ILL, ipif_up
		 * will have to re-bind to the device, so
		 * we may get back EINPROGRESS, in which
		 * case, this IOCTL will get completed in
		 * ip_rput_dlpi when we see the DL_BIND_ACK.
		 */
		err = ipif_up(ipif, q, mp);
	}
	return (err);
}

/* ARGSUSED */
int
ip_sioctl_slifzone_restart(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *if_req)
{
	struct lifreq *lifr = (struct lifreq *)if_req;
	zoneid_t zoneid;
	zone_t *zptr;
	zone_status_t status;

	ASSERT(ipif->ipif_id != 0);
	ASSERT(ipip->ipi_cmd_type == LIF_CMD);
	if ((zoneid = lifr->lifr_zoneid) == ALL_ZONES)
		zoneid = GLOBAL_ZONEID;

	ip1dbg(("ip_sioctl_slifzone_restart(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));

	/*
	 * We recheck the zone status to resolve the following race condition:
	 * 1) process sends SIOCSLIFZONE to put hme0:1 in zone "myzone";
	 * 2) hme0:1 is up and can't be brought down right away;
	 * ip_sioctl_slifzone() returns EINPROGRESS and the request is queued;
	 * 3) zone "myzone" is halted; the zone status switches to
	 * 'shutting_down' and the zones framework sends SIOCGLIFCONF to list
	 * the interfaces to remove - hme0:1 is not returned because it's not
	 * yet in "myzone", so it won't be removed;
	 * 4) the restart function for SIOCSLIFZONE is called; without the
	 * status check here, we would have hme0:1 in "myzone" after it's been
	 * destroyed.
	 * Note that if the status check fails, we need to bring the interface
	 * back to its state prior to ip_sioctl_slifzone(), hence the call to
	 * ipif_up_done[_v6]().
	 */
	status = ZONE_IS_UNINITIALIZED;
	if ((zptr = zone_find_by_id(zoneid)) != NULL) {
		status = zone_status_get(zptr);
		zone_rele(zptr);
	}
	if (status != ZONE_IS_READY && status != ZONE_IS_RUNNING) {
		if (ipif->ipif_isv6) {
			(void) ipif_up_done_v6(ipif);
		} else {
			(void) ipif_up_done(ipif);
		}
		return (EINVAL);
	}

	ipif_down_tail(ipif);

	return (ip_sioctl_slifzone_tail(ipif, lifr->lifr_zoneid, q, mp,
	    B_TRUE));
}

/* ARGSUSED */
int
ip_sioctl_get_lifusesrc(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
	ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifreq	*lifr = ifreq;

	ASSERT(q->q_next == NULL);
	ASSERT(CONN_Q(q));

	ip1dbg(("ip_sioctl_get_lifusesrc(%s:%u %p)\n",
	    ipif->ipif_ill->ill_name, ipif->ipif_id, (void *)ipif));
	lifr->lifr_index = ipif->ipif_ill->ill_usesrc_ifindex;
	ip1dbg(("ip_sioctl_get_lifusesrc:lifr_index = %d\n", lifr->lifr_index));

	return (0);
}


/* Find the previous ILL in this usesrc group */
static ill_t *
ill_prev_usesrc(ill_t *uill)
{
	ill_t *ill;

	for (ill = uill->ill_usesrc_grp_next;
	    ASSERT(ill), ill->ill_usesrc_grp_next != uill;
	    ill = ill->ill_usesrc_grp_next)
		/* do nothing */;
	return (ill);
}

/*
 * Release all members of the usesrc group. This routine is called
 * from ill_delete when the interface being unplumbed is the
 * group head.
 */
static void
ill_disband_usesrc_group(ill_t *uill)
{
	ill_t *next_ill, *tmp_ill;
	ASSERT(RW_WRITE_HELD(&ill_g_usesrc_lock));
	next_ill = uill->ill_usesrc_grp_next;

	do {
		ASSERT(next_ill != NULL);
		tmp_ill = next_ill->ill_usesrc_grp_next;
		ASSERT(tmp_ill != NULL);
		next_ill->ill_usesrc_grp_next = NULL;
		next_ill->ill_usesrc_ifindex = 0;
		next_ill = tmp_ill;
	} while (next_ill->ill_usesrc_ifindex != 0);
	uill->ill_usesrc_grp_next = NULL;
}

/*
 * Remove the client usesrc ILL from the list and relink to a new list
 */
int
ill_relink_usesrc_ills(ill_t *ucill, ill_t *uill, uint_t ifindex)
{
	ill_t *ill, *tmp_ill;

	ASSERT((ucill != NULL) && (ucill->ill_usesrc_grp_next != NULL) &&
	    (uill != NULL) && RW_WRITE_HELD(&ill_g_usesrc_lock));

	/*
	 * Check if the usesrc client ILL passed in is not already
	 * in use as a usesrc ILL i.e one whose source address is
	 * in use OR a usesrc ILL is not already in use as a usesrc
	 * client ILL
	 */
	if ((ucill->ill_usesrc_ifindex == 0) ||
	    (uill->ill_usesrc_ifindex != 0)) {
		return (-1);
	}

	ill = ill_prev_usesrc(ucill);
	ASSERT(ill->ill_usesrc_grp_next != NULL);

	/* Remove from the current list */
	if (ill->ill_usesrc_grp_next->ill_usesrc_grp_next == ill) {
		/* Only two elements in the list */
		ASSERT(ill->ill_usesrc_ifindex == 0);
		ill->ill_usesrc_grp_next = NULL;
	} else {
		ill->ill_usesrc_grp_next = ucill->ill_usesrc_grp_next;
	}

	if (ifindex == 0) {
		ucill->ill_usesrc_ifindex = 0;
		ucill->ill_usesrc_grp_next = NULL;
		return (0);
	}

	ucill->ill_usesrc_ifindex = ifindex;
	tmp_ill = uill->ill_usesrc_grp_next;
	uill->ill_usesrc_grp_next = ucill;
	ucill->ill_usesrc_grp_next =
	    (tmp_ill != NULL) ? tmp_ill : uill;
	return (0);
}

/*
 * Set the ill_usesrc and ill_usesrc_head fields. See synchronization notes in
 * ip.c for locking details.
 */
/* ARGSUSED */
int
ip_sioctl_slifusesrc(ipif_t *ipif, sin_t *sin, queue_t *q, mblk_t *mp,
    ip_ioctl_cmd_t *ipip, void *ifreq)
{
	struct lifreq *lifr = (struct lifreq *)ifreq;
	boolean_t isv6 = B_FALSE, reset_flg = B_FALSE,
	    ill_flag_changed = B_FALSE;
	ill_t *usesrc_ill, *usesrc_cli_ill = ipif->ipif_ill;
	int err = 0, ret;
	uint_t ifindex;
	phyint_t *us_phyint, *us_cli_phyint;
	ipsq_t *ipsq = NULL;

	ASSERT(IAM_WRITER_IPIF(ipif));
	ASSERT(q->q_next == NULL);
	ASSERT(CONN_Q(q));

	isv6 = (Q_TO_CONN(q))->conn_af_isv6;
	us_cli_phyint = usesrc_cli_ill->ill_phyint;

	ASSERT(us_cli_phyint != NULL);

	/*
	 * If the client ILL is being used for IPMP, abort.
	 * Note, this can be done before ipsq_try_enter since we are already
	 * exclusive on this ILL
	 */
	if ((us_cli_phyint->phyint_groupname != NULL) ||
	    (us_cli_phyint->phyint_flags & PHYI_STANDBY)) {
		return (EINVAL);
	}

	ifindex = lifr->lifr_index;
	if (ifindex == 0) {
		if (usesrc_cli_ill->ill_usesrc_grp_next == NULL) {
			/* non usesrc group interface, nothing to reset */
			return (0);
		}
		ifindex = usesrc_cli_ill->ill_usesrc_ifindex;
		/* valid reset request */
		reset_flg = B_TRUE;
	}

	usesrc_ill = ill_lookup_on_ifindex(ifindex, isv6, q, mp,
	    ip_process_ioctl, &err);

	if (usesrc_ill == NULL) {
		return (err);
	}

	/*
	 * The usesrc_cli_ill or the usesrc_ill cannot be part of an IPMP
	 * group nor can either of the interfaces be used for standy. So
	 * to guarantee mutual exclusion with ip_sioctl_flags (which sets
	 * PHYI_STANDBY) and ip_sioctl_groupname (which sets the groupname)
	 * we need to be exclusive on the ipsq belonging to the usesrc_ill.
	 * We are already exlusive on this ipsq i.e ipsq corresponding to
	 * the usesrc_cli_ill
	 */
	ipsq = ipsq_try_enter(NULL, usesrc_ill, q, mp, ip_process_ioctl,
	    NEW_OP, B_TRUE);
	if (ipsq == NULL) {
		err = EINPROGRESS;
		/* Operation enqueued on the ipsq of the usesrc ILL */
		goto done;
	}

	/* Check if the usesrc_ill is used for IPMP */
	us_phyint = usesrc_ill->ill_phyint;
	if ((us_phyint->phyint_groupname != NULL) ||
	    (us_phyint->phyint_flags & PHYI_STANDBY)) {
		err = EINVAL;
		goto done;
	}

	/*
	 * If the client is already in use as a usesrc_ill or a usesrc_ill is
	 * already a client then return EINVAL
	 */
	if (IS_USESRC_ILL(usesrc_cli_ill) || IS_USESRC_CLI_ILL(usesrc_ill)) {
		err = EINVAL;
		goto done;
	}

	/*
	 * If the ill_usesrc_ifindex field is already set to what it needs to
	 * be then this is a duplicate operation.
	 */
	if (!reset_flg && usesrc_cli_ill->ill_usesrc_ifindex == ifindex) {
		err = 0;
		goto done;
	}

	ip1dbg(("ip_sioctl_slifusesrc: usesrc_cli_ill %s, usesrc_ill %s,"
	    " v6 = %d", usesrc_cli_ill->ill_name, usesrc_ill->ill_name,
	    usesrc_ill->ill_isv6));

	/*
	 * The next step ensures that no new ires will be created referencing
	 * the client ill, until the ILL_CHANGING flag is cleared. Then
	 * we go through an ire walk deleting all ire caches that reference
	 * the client ill. New ires referencing the client ill that are added
	 * to the ire table before the ILL_CHANGING flag is set, will be
	 * cleaned up by the ire walk below. Attempt to add new ires referencing
	 * the client ill while the ILL_CHANGING flag is set will be failed
	 * during the ire_add in ire_atomic_start. ire_atomic_start atomically
	 * checks (under the ill_g_usesrc_lock) that the ire being added
	 * is not stale, i.e the ire_stq and ire_ipif are consistent and
	 * belong to the same usesrc group.
	 */
	mutex_enter(&usesrc_cli_ill->ill_lock);
	usesrc_cli_ill->ill_state_flags |= ILL_CHANGING;
	mutex_exit(&usesrc_cli_ill->ill_lock);
	ill_flag_changed = B_TRUE;

	if (ipif->ipif_isv6)
		ire_walk_v6(ipif_delete_cache_ire, (char *)usesrc_cli_ill,
		    ALL_ZONES);
	else
		ire_walk_v4(ipif_delete_cache_ire, (char *)usesrc_cli_ill,
		    ALL_ZONES);

	/*
	 * ill_g_usesrc_lock global lock protects the ill_usesrc_grp_next
	 * and the ill_usesrc_ifindex fields
	 */
	rw_enter(&ill_g_usesrc_lock, RW_WRITER);

	if (reset_flg) {
		ret = ill_relink_usesrc_ills(usesrc_cli_ill, usesrc_ill, 0);
		if (ret != 0) {
			err = EINVAL;
		}
		rw_exit(&ill_g_usesrc_lock);
		goto done;
	}

	/*
	 * Four possibilities to consider:
	 * 1. Both usesrc_ill and usesrc_cli_ill are not part of any usesrc grp
	 * 2. usesrc_ill is part of a group but usesrc_cli_ill isn't
	 * 3. usesrc_cli_ill is part of a group but usesrc_ill isn't
	 * 4. Both are part of their respective usesrc groups
	 */
	if ((usesrc_ill->ill_usesrc_grp_next == NULL) &&
	    (usesrc_cli_ill->ill_usesrc_grp_next == NULL)) {
		ASSERT(usesrc_ill->ill_usesrc_ifindex == 0);
		usesrc_cli_ill->ill_usesrc_ifindex = ifindex;
		usesrc_ill->ill_usesrc_grp_next = usesrc_cli_ill;
		usesrc_cli_ill->ill_usesrc_grp_next = usesrc_ill;
	} else if ((usesrc_ill->ill_usesrc_grp_next != NULL) &&
	    (usesrc_cli_ill->ill_usesrc_grp_next == NULL)) {
		usesrc_cli_ill->ill_usesrc_ifindex = ifindex;
		/* Insert at head of list */
		usesrc_cli_ill->ill_usesrc_grp_next =
		    usesrc_ill->ill_usesrc_grp_next;
		usesrc_ill->ill_usesrc_grp_next = usesrc_cli_ill;
	} else {
		ret = ill_relink_usesrc_ills(usesrc_cli_ill, usesrc_ill,
		    ifindex);
		if (ret != 0)
			err = EINVAL;
	}
	rw_exit(&ill_g_usesrc_lock);

done:
	if (ill_flag_changed) {
		mutex_enter(&usesrc_cli_ill->ill_lock);
		usesrc_cli_ill->ill_state_flags &= ~ILL_CHANGING;
		mutex_exit(&usesrc_cli_ill->ill_lock);
	}
	if (ipsq != NULL)
		ipsq_exit(ipsq, B_TRUE, B_TRUE);
	/* The refrele on the lifr_name ipif is done by ip_process_ioctl */
	ill_refrele(usesrc_ill);
	return (err);
}

/*
 * comparison function used by avl.
 */
static int
ill_phyint_compare_index(const void *index_ptr, const void *phyip)
{

	uint_t index;

	ASSERT(phyip != NULL && index_ptr != NULL);

	index = *((uint_t *)index_ptr);
	/*
	 * let the phyint with the lowest index be on top.
	 */
	if (((phyint_t *)phyip)->phyint_ifindex < index)
		return (1);
	if (((phyint_t *)phyip)->phyint_ifindex > index)
		return (-1);
	return (0);
}

/*
 * comparison function used by avl.
 */
static int
ill_phyint_compare_name(const void *name_ptr, const void *phyip)
{
	ill_t *ill;
	int res = 0;

	ASSERT(phyip != NULL && name_ptr != NULL);

	if (((phyint_t *)phyip)->phyint_illv4)
		ill = ((phyint_t *)phyip)->phyint_illv4;
	else
		ill = ((phyint_t *)phyip)->phyint_illv6;
	ASSERT(ill != NULL);

	res = strcmp(ill->ill_name, (char *)name_ptr);
	if (res > 0)
		return (1);
	else if (res < 0)
		return (-1);
	return (0);
}
/*
 * This function is called from ill_delete when the ill is being
 * unplumbed. We remove the reference from the phyint and we also
 * free the phyint when there are no more references to it.
 */
static void
ill_phyint_free(ill_t *ill)
{
	phyint_t *phyi;
	phyint_t *next_phyint;
	ipsq_t *cur_ipsq;

	ASSERT(ill->ill_phyint != NULL);

	ASSERT(RW_WRITE_HELD(&ill_g_lock));
	phyi = ill->ill_phyint;
	ill->ill_phyint = NULL;
	/*
	 * ill_init allocates a phyint always to store the copy
	 * of flags relevant to phyint. At that point in time, we could
	 * not assign the name and hence phyint_illv4/v6 could not be
	 * initialized. Later in ipif_set_values, we assign the name to
	 * the ill, at which point in time we assign phyint_illv4/v6.
	 * Thus we don't rely on phyint_illv6 to be initialized always.
	 */
	if (ill->ill_flags & ILLF_IPV6) {
		phyi->phyint_illv6 = NULL;
	} else {
		phyi->phyint_illv4 = NULL;
	}
	/*
	 * ipif_down removes it from the group when the last ipif goes
	 * down.
	 */
	ASSERT(ill->ill_group == NULL);

	if (phyi->phyint_illv4 != NULL || phyi->phyint_illv6 != NULL)
		return;

	/*
	 * Make sure this phyint was put in the list.
	 */
	if (phyi->phyint_ifindex > 0) {
		avl_remove(&phyint_g_list.phyint_list_avl_by_index,
		    phyi);
		avl_remove(&phyint_g_list.phyint_list_avl_by_name,
		    phyi);
	}
	/*
	 * remove phyint from the ipsq list.
	 */
	cur_ipsq = phyi->phyint_ipsq;
	if (phyi == cur_ipsq->ipsq_phyint_list) {
		cur_ipsq->ipsq_phyint_list = phyi->phyint_ipsq_next;
	} else {
		next_phyint = cur_ipsq->ipsq_phyint_list;
		while (next_phyint != NULL) {
			if (next_phyint->phyint_ipsq_next == phyi) {
				next_phyint->phyint_ipsq_next =
					phyi->phyint_ipsq_next;
				break;
			}
			next_phyint = next_phyint->phyint_ipsq_next;
		}
		ASSERT(next_phyint != NULL);
	}
	IPSQ_DEC_REF(cur_ipsq);

	if (phyi->phyint_groupname_len != 0) {
		ASSERT(phyi->phyint_groupname != NULL);
		mi_free(phyi->phyint_groupname);
	}
	mi_free(phyi);
}

/*
 * Attach the ill to the phyint structure which can be shared by both
 * IPv4 and IPv6 ill. ill_init allocates a phyint to just hold flags. This
 * function is called from ipif_set_values and ill_lookup_on_name (for
 * loopback) where we know the name of the ill. We lookup the ill and if
 * there is one present already with the name use that phyint. Otherwise
 * reuse the one allocated by ill_init.
 */
static void
ill_phyint_reinit(ill_t *ill)
{
	boolean_t isv6 = ill->ill_isv6;
	phyint_t *phyi_old;
	phyint_t *phyi;
	avl_index_t where = 0;
	ill_t	*ill_other = NULL;
	ipsq_t	*ipsq;

	ASSERT(RW_WRITE_HELD(&ill_g_lock));

	phyi_old = ill->ill_phyint;
	ASSERT(isv6 || (phyi_old->phyint_illv4 == ill &&
	    phyi_old->phyint_illv6 == NULL));
	ASSERT(!isv6 || (phyi_old->phyint_illv6 == ill &&
	    phyi_old->phyint_illv4 == NULL));
	ASSERT(phyi_old->phyint_ifindex == 0);

	phyi = avl_find(&phyint_g_list.phyint_list_avl_by_name,
	    ill->ill_name, &where);

	/*
	 * 1. We grabbed the ill_g_lock before inserting this ill into
	 *    the global list of ills. So no other thread could have located
	 *    this ill and hence the ipsq of this ill is guaranteed to be empty.
	 * 2. Now locate the other protocol instance of this ill.
	 * 3. Now grab both ill locks in the right order, and the phyint lock of
	 *    the new ipsq. Holding ill locks + ill_g_lock ensures that the ipsq
	 *    of neither ill can change.
	 * 4. Merge the phyint and thus the ipsq as well of this ill onto the
	 *    other ill.
	 * 5. Release all locks.
	 */

	/*
	 * Look for IPv4 if we are initializing IPv6 or look for IPv6 if
	 * we are initializing IPv4.
	 */
	if (phyi != NULL) {
		ill_other = (isv6) ? phyi->phyint_illv4 :
		    phyi->phyint_illv6;
		ASSERT(ill_other->ill_phyint != NULL);
		ASSERT((isv6 && !ill_other->ill_isv6) ||
		    (!isv6 && ill_other->ill_isv6));
		GRAB_ILL_LOCKS(ill, ill_other);
		/*
		 * We are potentially throwing away phyint_flags which
		 * could be different from the one that we obtain from
		 * ill_other->ill_phyint. But it is okay as we are assuming
		 * that the state maintained within IP is correct.
		 */
		mutex_enter(&phyi->phyint_lock);
		if (isv6) {
			ASSERT(phyi->phyint_illv6 == NULL);
			phyi->phyint_illv6 = ill;
		} else {
			ASSERT(phyi->phyint_illv4 == NULL);
			phyi->phyint_illv4 = ill;
		}
		/*
		 * This is a new ill, currently undergoing SLIFNAME
		 * So we could not have joined an IPMP group until now.
		 */
		ASSERT(phyi_old->phyint_ipsq_next == NULL &&
		    phyi_old->phyint_groupname == NULL);

		/*
		 * This phyi_old is going away. Decref ipsq_refs and
		 * assert it is zero. The ipsq itself will be freed in
		 * ipsq_exit
		 */
		ipsq = phyi_old->phyint_ipsq;
		IPSQ_DEC_REF(ipsq);
		ASSERT(ipsq->ipsq_refs == 0);
		/* Get the singleton phyint out of the ipsq list */
		ASSERT(phyi_old->phyint_ipsq_next == NULL);
		ipsq->ipsq_phyint_list = NULL;
		phyi_old->phyint_illv4 = NULL;
		phyi_old->phyint_illv6 = NULL;
		mi_free(phyi_old);
	} else {
		mutex_enter(&ill->ill_lock);
		/*
		 * We don't need to acquire any lock, since
		 * the ill is not yet visible globally  and we
		 * have not yet released the ill_g_lock.
		 */
		phyi = phyi_old;
		mutex_enter(&phyi->phyint_lock);
		/* XXX We need a recovery strategy here. */
		if (!phyint_assign_ifindex(phyi))
			cmn_err(CE_PANIC, "phyint_assign_ifindex() failed");

		avl_insert(&phyint_g_list.phyint_list_avl_by_name,
		    (void *)phyi, where);

		(void) avl_find(&phyint_g_list.phyint_list_avl_by_index,
		    &phyi->phyint_ifindex, &where);
		avl_insert(&phyint_g_list.phyint_list_avl_by_index,
		    (void *)phyi, where);
	}

	/*
	 * Reassigning ill_phyint automatically reassigns the ipsq also.
	 * pending mp is not affected because that is per ill basis.
	 */
	ill->ill_phyint = phyi;

	/*
	 * Keep the index on ipif_orig_index to be used by FAILOVER.
	 * We do this here as when the first ipif was allocated,
	 * ipif_allocate does not know the right interface index.
	 */

	ill->ill_ipif->ipif_orig_ifindex = ill->ill_phyint->phyint_ifindex;
	/*
	 * Now that the phyint's ifindex has been assigned, complete the
	 * remaining
	 */
	if (ill->ill_isv6) {
		ill->ill_ip6_mib->ipv6IfIndex =
		    ill->ill_phyint->phyint_ifindex;
		ill->ill_icmp6_mib->ipv6IfIcmpIfIndex =
		    ill->ill_phyint->phyint_ifindex;
	}

	RELEASE_ILL_LOCKS(ill, ill_other);
	mutex_exit(&phyi->phyint_lock);
}

/*
 * Notify any downstream modules of the name of this interface.
 * An M_IOCTL is used even though we don't expect a successful reply.
 * Any reply message from the driver (presumably an M_IOCNAK) will
 * eventually get discarded somewhere upstream.  The message format is
 * simply an SIOCSLIFNAME ioctl just as might be sent from ifconfig
 * to IP.
 */
static void
ip_ifname_notify(ill_t *ill, queue_t *q)
{
	mblk_t *mp1, *mp2;
	struct iocblk *iocp;
	struct lifreq *lifr;

	mp1 = mkiocb(SIOCSLIFNAME);
	if (mp1 == NULL)
		return;
	mp2 = allocb(sizeof (struct lifreq), BPRI_HI);
	if (mp2 == NULL) {
		freeb(mp1);
		return;
	}

	mp1->b_cont = mp2;
	iocp = (struct iocblk *)mp1->b_rptr;
	iocp->ioc_count = sizeof (struct lifreq);

	lifr = (struct lifreq *)mp2->b_rptr;
	mp2->b_wptr += sizeof (struct lifreq);
	bzero(lifr, sizeof (struct lifreq));

	(void) strncpy(lifr->lifr_name, ill->ill_name, LIFNAMSIZ);
	lifr->lifr_ppa = ill->ill_ppa;
	lifr->lifr_flags = (ill->ill_flags & (ILLF_IPV4|ILLF_IPV6));

	putnext(q, mp1);
}

static boolean_t ip_trash_timer_started = B_FALSE;

static int
ipif_set_values_tail(ill_t *ill, ipif_t *ipif, mblk_t *mp, queue_t *q)
{
	int err;

	/* Set the obsolete NDD per-interface forwarding name. */
	err = ill_set_ndd_name(ill);
	if (err != 0) {
		cmn_err(CE_WARN, "ipif_set_values: ill_set_ndd_name (%d)\n",
		    err);
	}

	/* Tell downstream modules where they are. */
	ip_ifname_notify(ill, q);

	/*
	 * ill_dl_phys returns EINPROGRESS in the usual case.
	 * Error cases are ENOMEM ...
	 */
	err = ill_dl_phys(ill, ipif, mp, q);

	/*
	 * If there is no IRE expiration timer running, get one started.
	 * igmp and mld timers will be triggered by the first multicast
	 */
	if (!ip_trash_timer_started) {
		/*
		 * acquire the lock and check again.
		 */
		mutex_enter(&ip_trash_timer_lock);
		if (!ip_trash_timer_started) {
			ip_ire_expire_id = timeout(ip_trash_timer_expire, NULL,
			    MSEC_TO_TICK(ip_timer_interval));
			ip_trash_timer_started = B_TRUE;
		}
		mutex_exit(&ip_trash_timer_lock);
	}

	if (ill->ill_isv6) {
		mutex_enter(&mld_slowtimeout_lock);
		if (mld_slowtimeout_id == 0) {
			mld_slowtimeout_id = timeout(mld_slowtimo, NULL,
			    MSEC_TO_TICK(MCAST_SLOWTIMO_INTERVAL));
		}
		mutex_exit(&mld_slowtimeout_lock);
	} else {
		mutex_enter(&igmp_slowtimeout_lock);
		if (igmp_slowtimeout_id == 0) {
			igmp_slowtimeout_id = timeout(igmp_slowtimo, NULL,
				MSEC_TO_TICK(MCAST_SLOWTIMO_INTERVAL));
		}
		mutex_exit(&igmp_slowtimeout_lock);
	}

	return (err);
}

/*
 * Common routine for ppa and ifname setting. Should be called exclusive.
 *
 * Returns EINPROGRESS when mp has been consumed by queueing it on
 * ill_pending_mp and the ioctl will complete in ip_rput.
 *
 * NOTE : If ppa is UNIT_MAX, we assign the next valid ppa and return
 * the new name and new ppa in lifr_name and lifr_ppa respectively.
 * For SLIFNAME, we pass these values back to the userland.
 */
static int
ipif_set_values(queue_t *q, mblk_t *mp, char *interf_name, uint_t *new_ppa_ptr)
{
	ill_t	*ill;
	ipif_t	*ipif;
	ipsq_t	*ipsq;
	char	*ppa_ptr;
	char	*old_ptr;
	char	old_char;
	int	error;

	ip1dbg(("ipif_set_values: interface %s\n", interf_name));
	ASSERT(q->q_next != NULL);
	ASSERT(interf_name != NULL);

	ill = (ill_t *)q->q_ptr;

	ASSERT(ill->ill_name[0] == '\0');
	ASSERT(IAM_WRITER_ILL(ill));
	ASSERT((mi_strlen(interf_name) + 1) <= LIFNAMSIZ);
	ASSERT(ill->ill_ppa == UINT_MAX);

	/* The ppa is sent down by ifconfig or is chosen */
	if ((ppa_ptr = ill_get_ppa_ptr(interf_name)) == NULL) {
		return (EINVAL);
	}

	/*
	 * make sure ppa passed in is same as ppa in the name.
	 * This check is not made when ppa == UINT_MAX in that case ppa
	 * in the name could be anything. System will choose a ppa and
	 * update new_ppa_ptr and inter_name to contain the choosen ppa.
	 */
	if (*new_ppa_ptr != UINT_MAX) {
		/* stoi changes the pointer */
		old_ptr = ppa_ptr;
		/*
		 * ifconfig passed in 0 for the ppa for DLPI 1 style devices
		 * (they don't have an externally visible ppa).  We assign one
		 * here so that we can manage the interface.  Note that in
		 * the past this value was always 0 for DLPI 1 drivers.
		 */
		if (*new_ppa_ptr == 0)
			*new_ppa_ptr = stoi(&old_ptr);
		else if (*new_ppa_ptr != (uint_t)stoi(&old_ptr))
			return (EINVAL);
	}
	/*
	 * terminate string before ppa
	 * save char at that location.
	 */
	old_char = ppa_ptr[0];
	ppa_ptr[0] = '\0';

	ill->ill_ppa = *new_ppa_ptr;
	/*
	 * Finish as much work now as possible before calling ill_glist_insert
	 * which makes the ill globally visible and also merges it with the
	 * other protocol instance of this phyint. The remaining work is
	 * done after entering the ipsq which may happen sometime later.
	 * ill_set_ndd_name occurs after the ill has been made globally visible.
	 */
	ipif = ill->ill_ipif;

	/* We didn't do this when we allocated ipif in ip_ll_subnet_defaults */
	ipif_assign_seqid(ipif);

	if (!(ill->ill_flags & (ILLF_IPV4|ILLF_IPV6)))
		ill->ill_flags |= ILLF_IPV4;

	ASSERT(ipif->ipif_next == NULL);	/* Only one ipif on ill */
	ASSERT((ipif->ipif_flags & IPIF_UP) == 0);

	if (ill->ill_flags & ILLF_IPV6) {

		ill->ill_isv6 = B_TRUE;
		if (ill->ill_rq != NULL) {
			ill->ill_rq->q_qinfo = &rinit_ipv6;
			ill->ill_wq->q_qinfo = &winit_ipv6;
		}

		/* Keep the !IN6_IS_ADDR_V4MAPPED assertions happy */
		ipif->ipif_v6lcl_addr = ipv6_all_zeros;
		ipif->ipif_v6src_addr = ipv6_all_zeros;
		ipif->ipif_v6subnet = ipv6_all_zeros;
		ipif->ipif_v6net_mask = ipv6_all_zeros;
		ipif->ipif_v6brd_addr = ipv6_all_zeros;
		ipif->ipif_v6pp_dst_addr = ipv6_all_zeros;
		/*
		 * point-to-point or Non-mulicast capable
		 * interfaces won't do NUD unless explicitly
		 * configured to do so.
		 */
		if (ipif->ipif_flags & IPIF_POINTOPOINT ||
		    !(ill->ill_flags & ILLF_MULTICAST)) {
			ill->ill_flags |= ILLF_NONUD;
		}
		/* Make sure IPv4 specific flag is not set on IPv6 if */
		if (ill->ill_flags & ILLF_NOARP) {
			/*
			 * Note: xresolv interfaces will eventually need
			 * NOARP set here as well, but that will require
			 * those external resolvers to have some
			 * knowledge of that flag and act appropriately.
			 * Not to be changed at present.
			 */
			ill->ill_flags &= ~ILLF_NOARP;
		}
		/*
		 * Set the ILLF_ROUTER flag according to the global
		 * IPv6 forwarding policy.
		 */
		if (ipv6_forward != 0)
			ill->ill_flags |= ILLF_ROUTER;
	} else if (ill->ill_flags & ILLF_IPV4) {
		ill->ill_isv6 = B_FALSE;
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6lcl_addr);
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6src_addr);
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6subnet);
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6net_mask);
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6brd_addr);
		IN6_IPADDR_TO_V4MAPPED(INADDR_ANY, &ipif->ipif_v6pp_dst_addr);
		/*
		 * Set the ILLF_ROUTER flag according to the global
		 * IPv4 forwarding policy.
		 */
		if (ip_g_forward != 0)
			ill->ill_flags |= ILLF_ROUTER;
	}

	ASSERT(ill->ill_phyint != NULL);

	/*
	 * The ipv6Ifindex and ipv6IfIcmpIfIndex assignments will
	 * be completed in ill_glist_insert -> ill_phyint_reinit
	 */
	if (ill->ill_isv6) {
		/* allocate v6 mib */
		if (!ill_allocate_mibs(ill))
			return (ENOMEM);
	}

	/*
	 * Pick a default sap until we get the DL_INFO_ACK back from
	 * the driver.
	 */
	if (ill->ill_sap == 0) {
		if (ill->ill_isv6)
			ill->ill_sap  = IP6_DL_SAP;
		else
			ill->ill_sap  = IP_DL_SAP;
	}

	ill->ill_ifname_pending = 1;
	ill->ill_ifname_pending_err = 0;

	ill_refhold(ill);
	rw_enter(&ill_g_lock, RW_WRITER);
	if ((error = ill_glist_insert(ill, interf_name,
	    (ill->ill_flags & ILLF_IPV6) == ILLF_IPV6)) > 0) {
		ill->ill_ppa = UINT_MAX;
		ill->ill_name[0] = '\0';
		/*
		 * undo null termination done above.
		 */
		ppa_ptr[0] = old_char;
		rw_exit(&ill_g_lock);
		ill_refrele(ill);
		return (error);
	}

	ASSERT(ill->ill_name_length <= LIFNAMSIZ);

	/*
	 * When we return the buffer pointed to by interf_name should contain
	 * the same name as in ill_name.
	 * If a ppa was choosen by the system (ppa passed in was UINT_MAX)
	 * the buffer pointed to by new_ppa_ptr would not contain the right ppa
	 * so copy full name and update the ppa ptr.
	 * When ppa passed in != UINT_MAX all values are correct just undo
	 * null termination, this saves a bcopy.
	 */
	if (*new_ppa_ptr == UINT_MAX) {
		bcopy(ill->ill_name, interf_name, ill->ill_name_length);
		*new_ppa_ptr = ill->ill_ppa;
	} else {
		/*
		 * undo null termination done above.
		 */
		ppa_ptr[0] = old_char;
	}

	/* Let SCTP know about this ILL */
	sctp_update_ill(ill, SCTP_ILL_INSERT);

	/* and also about the first ipif */
	sctp_update_ipif(ipif, SCTP_IPIF_INSERT);

	ipsq = ipsq_try_enter(NULL, ill, q, mp, ip_reprocess_ioctl, NEW_OP,
	    B_TRUE);

	rw_exit(&ill_g_lock);
	ill_refrele(ill);
	if (ipsq == NULL)
		return (EINPROGRESS);

	/*
	 * Need to set the ipsq_current_ipif now, if we have changed ipsq
	 * due to the phyint merge in ill_phyint_reinit.
	 */
	ASSERT(ipsq->ipsq_current_ipif == NULL ||
		ipsq->ipsq_current_ipif == ipif);
	ipsq->ipsq_current_ipif = ipif;
	ipsq->ipsq_last_cmd = SIOCSLIFNAME;
	error = ipif_set_values_tail(ill, ipif, mp, q);
	ipsq_exit(ipsq, B_TRUE, B_TRUE);
	if (error != 0 && error != EINPROGRESS) {
		/*
		 * restore previous values
		 */
		ill->ill_isv6 = B_FALSE;
	}
	return (error);
}


extern void (*ip_cleanup_func)(void);

void
ipif_init(void)
{
	hrtime_t hrt;
	int i;

	/*
	 * Can't call drv_getparm here as it is too early in the boot.
	 * As we use ipif_src_random just for picking a different
	 * source address everytime, this need not be really random.
	 */
	hrt = gethrtime();
	ipif_src_random = ((hrt >> 32) & 0xffffffff) * (hrt & 0xffffffff);

	for (i = 0; i < MAX_G_HEADS; i++) {
		ill_g_heads[i].ill_g_list_head = (ill_if_t *)&ill_g_heads[i];
		ill_g_heads[i].ill_g_list_tail = (ill_if_t *)&ill_g_heads[i];
	}

	avl_create(&phyint_g_list.phyint_list_avl_by_index,
	    ill_phyint_compare_index,
	    sizeof (phyint_t),
	    offsetof(struct phyint, phyint_avl_by_index));
	avl_create(&phyint_g_list.phyint_list_avl_by_name,
	    ill_phyint_compare_name,
	    sizeof (phyint_t),
	    offsetof(struct phyint, phyint_avl_by_name));

	ip_cleanup_func = ip_thread_exit;
}

/*
 * This is called by ip_rt_add when src_addr value is other than zero.
 * src_addr signifies the source address of the incoming packet. For
 * reverse tunnel route we need to create a source addr based routing
 * table. This routine creates ip_mrtun_table if it's empty and then
 * it adds the route entry hashed by source address. It verifies that
 * the outgoing interface is always a non-resolver interface (tunnel).
 */
int
ip_mrtun_rt_add(ipaddr_t in_src_addr, int flags, ipif_t *ipif_arg,
    ipif_t *src_ipif, ire_t **ire_arg, queue_t *q, mblk_t *mp, ipsq_func_t func)
{
	ire_t   *ire;
	ire_t	*save_ire;
	ipif_t  *ipif;
	ill_t   *in_ill = NULL;
	ill_t	*out_ill;
	queue_t	*stq;
	mblk_t	*dlureq_mp;
	int	error;

	if (ire_arg != NULL)
		*ire_arg = NULL;
	ASSERT(in_src_addr != INADDR_ANY);

	ipif = ipif_arg;
	if (ipif != NULL) {
		out_ill = ipif->ipif_ill;
	} else {
		ip1dbg(("ip_mrtun_rt_add: ipif is NULL\n"));
		return (EINVAL);
	}

	if (src_ipif == NULL) {
		ip1dbg(("ip_mrtun_rt_add: src_ipif is NULL\n"));
		return (EINVAL);
	}
	in_ill = src_ipif->ipif_ill;

	/*
	 * Check for duplicates. We don't need to
	 * match out_ill, because the uniqueness of
	 * a route is only dependent on src_addr and
	 * in_ill.
	 */
	ire = ire_mrtun_lookup(in_src_addr, in_ill);
	if (ire != NULL) {
		ire_refrele(ire);
		return (EEXIST);
	}
	if (ipif->ipif_net_type != IRE_IF_NORESOLVER) {
		ip2dbg(("ip_mrtun_rt_add: outgoing interface is type %d\n",
		    ipif->ipif_net_type));
		return (EINVAL);
	}

	stq = ipif->ipif_wq;
	ASSERT(stq != NULL);

	/*
	 * The outgoing interface must be non-resolver
	 * interface.
	 */
	dlureq_mp = ill_dlur_gen(NULL,
	    out_ill->ill_phys_addr_length, out_ill->ill_sap,
	    out_ill->ill_sap_length);

	if (dlureq_mp == NULL) {
		ip1dbg(("ip_newroute: dlureq_mp NULL\n"));
		return (ENOMEM);
	}

	/* Create the IRE. */

	ire = ire_create(
	    NULL,				/* Zero dst addr */
	    NULL,				/* Zero mask */
	    NULL,				/* Zero gateway addr */
	    NULL,				/* Zero ipif_src addr */
	    (uint8_t *)&in_src_addr,		/* in_src-addr */
	    &ipif->ipif_mtu,
	    NULL,
	    NULL,				/* rfq */
	    stq,
	    IRE_MIPRTUN,
	    dlureq_mp,
	    ipif,
	    in_ill,
	    0,
	    0,
	    0,
	    flags,
	    &ire_uinfo_null,
	    NULL,
	    NULL);

	if (ire == NULL)
		return (ENOMEM);
	ip2dbg(("ip_mrtun_rt_add: mrtun route is created with type %d\n",
	    ire->ire_type));
	save_ire = ire;
	ASSERT(save_ire != NULL);
	error = ire_add_mrtun(&ire, q, mp, func);
	/*
	 * If ire_add_mrtun() failed, the ire passed in was freed
	 * so there is no need to do so here.
	 */
	if (error != 0) {
		return (error);
	}

	/* Duplicate check */
	if (ire != save_ire) {
		/* route already exists by now */
		ire_refrele(ire);
		return (EEXIST);
	}

	if (ire_arg != NULL) {
		/*
		 * Store the ire that was just added. the caller
		 * ip_rts_request responsible for doing ire_refrele()
		 * on it.
		 */
		*ire_arg = ire;
	} else {
		ire_refrele(ire);	/* held in ire_add_mrtun */
	}

	return (0);
}

/*
 * It is called by ip_rt_delete() only when mipagent requests to delete
 * a reverse tunnel route that was added by ip_mrtun_rt_add() before.
 */

int
ip_mrtun_rt_delete(ipaddr_t in_src_addr, ipif_t *src_ipif)
{
	ire_t   *ire = NULL;

	if (in_src_addr == INADDR_ANY)
		return (EINVAL);
	if (src_ipif == NULL)
		return (EINVAL);

	/* search if this route exists in the ip_mrtun_table */
	ire = ire_mrtun_lookup(in_src_addr, src_ipif->ipif_ill);
	if (ire == NULL) {
		ip2dbg(("ip_mrtun_rt_delete: ire not found\n"));
		return (ESRCH);
	}
	ire_delete(ire);
	ire_refrele(ire);
	return (0);
}

/*
 * Lookup the ipif corresponding to the onlink destination address. For
 * point-to-point interfaces, it matches with remote endpoint destination
 * address. For point-to-multipoint interfaces it only tries to match the
 * destination with the interface's subnet address. The longest, most specific
 * match is found to take care of such rare network configurations like -
 * le0: 129.146.1.1/16
 * le1: 129.146.2.2/24
 * It is used only by SO_DONTROUTE at the moment.
 */
ipif_t *
ipif_lookup_onlink_addr(ipaddr_t addr, zoneid_t zoneid)
{
	ipif_t	*ipif, *best_ipif;
	ill_t	*ill;
	ill_walk_context_t ctx;

	ASSERT(zoneid != ALL_ZONES);
	best_ipif = NULL;

	rw_enter(&ill_g_lock, RW_READER);
	ill = ILL_START_WALK_V4(&ctx);
	for (; ill != NULL; ill = ill_next(&ctx, ill)) {
		mutex_enter(&ill->ill_lock);
		for (ipif = ill->ill_ipif; ipif != NULL;
		    ipif = ipif->ipif_next) {
			if (!IPIF_CAN_LOOKUP(ipif))
				continue;
			if (ipif->ipif_zoneid != zoneid &&
			    ipif->ipif_zoneid != ALL_ZONES)
				continue;
			/*
			 * Point-to-point case. Look for exact match with
			 * destination address.
			 */
			if (ipif->ipif_flags & IPIF_POINTOPOINT) {
				if (ipif->ipif_pp_dst_addr == addr) {
					ipif_refhold_locked(ipif);
					mutex_exit(&ill->ill_lock);
					rw_exit(&ill_g_lock);
					if (best_ipif != NULL)
						ipif_refrele(best_ipif);
					return (ipif);
				}
			} else if (ipif->ipif_subnet == (addr &
			    ipif->ipif_net_mask)) {
				/*
				 * Point-to-multipoint case. Looping through to
				 * find the most specific match. If there are
				 * multiple best match ipif's then prefer ipif's
				 * that are UP. If there is only one best match
				 * ipif and it is DOWN we must still return it.
				 */
				if ((best_ipif == NULL) ||
				    (ipif->ipif_net_mask >
				    best_ipif->ipif_net_mask) ||
				    ((ipif->ipif_net_mask ==
				    best_ipif->ipif_net_mask) &&
				    ((ipif->ipif_flags & IPIF_UP) &&
				    (!(best_ipif->ipif_flags & IPIF_UP))))) {
					ipif_refhold_locked(ipif);
					mutex_exit(&ill->ill_lock);
					rw_exit(&ill_g_lock);
					if (best_ipif != NULL)
						ipif_refrele(best_ipif);
					best_ipif = ipif;
					rw_enter(&ill_g_lock, RW_READER);
					mutex_enter(&ill->ill_lock);
				}
			}
		}
		mutex_exit(&ill->ill_lock);
	}
	rw_exit(&ill_g_lock);
	return (best_ipif);
}


/*
 * Save enough information so that we can recreate the IRE if
 * the interface goes down and then up.
 */
static void
ipif_save_ire(ipif_t *ipif, ire_t *ire)
{
	mblk_t	*save_mp;

	save_mp = allocb(sizeof (ifrt_t), BPRI_MED);
	if (save_mp != NULL) {
		ifrt_t	*ifrt;

		save_mp->b_wptr += sizeof (ifrt_t);
		ifrt = (ifrt_t *)save_mp->b_rptr;
		bzero(ifrt, sizeof (ifrt_t));
		ifrt->ifrt_type = ire->ire_type;
		ifrt->ifrt_addr = ire->ire_addr;
		ifrt->ifrt_gateway_addr = ire->ire_gateway_addr;
		ifrt->ifrt_src_addr = ire->ire_src_addr;
		ifrt->ifrt_mask = ire->ire_mask;
		ifrt->ifrt_flags = ire->ire_flags;
		ifrt->ifrt_max_frag = ire->ire_max_frag;
		mutex_enter(&ipif->ipif_saved_ire_lock);
		save_mp->b_cont = ipif->ipif_saved_ire_mp;
		ipif->ipif_saved_ire_mp = save_mp;
		ipif->ipif_saved_ire_cnt++;
		mutex_exit(&ipif->ipif_saved_ire_lock);
	}
}


static void
ipif_remove_ire(ipif_t *ipif, ire_t *ire)
{
	mblk_t	**mpp;
	mblk_t	*mp;
	ifrt_t	*ifrt;

	/* Remove from ipif_saved_ire_mp list if it is there */
	mutex_enter(&ipif->ipif_saved_ire_lock);
	for (mpp = &ipif->ipif_saved_ire_mp; *mpp != NULL;
	    mpp = &(*mpp)->b_cont) {
		/*
		 * On a given ipif, the triple of address, gateway and
		 * mask is unique for each saved IRE (in the case of
		 * ordinary interface routes, the gateway address is
		 * all-zeroes).
		 */
		mp = *mpp;
		ifrt = (ifrt_t *)mp->b_rptr;
		if (ifrt->ifrt_addr == ire->ire_addr &&
		    ifrt->ifrt_gateway_addr == ire->ire_gateway_addr &&
		    ifrt->ifrt_mask == ire->ire_mask) {
			*mpp = mp->b_cont;
			ipif->ipif_saved_ire_cnt--;
			freeb(mp);
			break;
		}
	}
	mutex_exit(&ipif->ipif_saved_ire_lock);
}


/*
 * IP multirouting broadcast routes handling
 * Append CGTP broadcast IREs to regular ones created
 * at ifconfig time.
 */
static void
ip_cgtp_bcast_add(ire_t *ire, ire_t *ire_dst)
{
	ire_t *ire_prim;

	ASSERT(ire != NULL);
	ASSERT(ire_dst != NULL);

	ire_prim = ire_ctable_lookup(ire->ire_gateway_addr, 0,
	    IRE_BROADCAST, NULL, ALL_ZONES, NULL, MATCH_IRE_TYPE);
	if (ire_prim != NULL) {
		/*
		 * We are in the special case of broadcasts for
		 * CGTP. We add an IRE_BROADCAST that holds
		 * the RTF_MULTIRT flag, the destination
		 * address of ire_dst and the low level
		 * info of ire_prim. In other words, CGTP
		 * broadcast is added to the redundant ipif.
		 */
		ipif_t *ipif_prim;
		ire_t  *bcast_ire;

		ipif_prim = ire_prim->ire_ipif;

		ip2dbg(("ip_cgtp_filter_bcast_add: "
		    "ire_dst %p, ire_prim %p, ipif_prim %p\n",
		    (void *)ire_dst, (void *)ire_prim,
		    (void *)ipif_prim));

		bcast_ire = ire_create(
		    (uchar_t *)&ire->ire_addr,
		    (uchar_t *)&ip_g_all_ones,
		    (uchar_t *)&ire_dst->ire_src_addr,
		    (uchar_t *)&ire->ire_gateway_addr,
		    NULL,
		    &ipif_prim->ipif_mtu,
		    NULL,
		    ipif_prim->ipif_rq,
		    ipif_prim->ipif_wq,
		    IRE_BROADCAST,
		    ipif_prim->ipif_bcast_mp,
		    ipif_prim,
		    NULL,
		    0,
		    0,
		    0,
		    ire->ire_flags,
		    &ire_uinfo_null,
		    NULL,
		    NULL);

		if (bcast_ire != NULL) {

			if (ire_add(&bcast_ire, NULL, NULL, NULL,
			    B_FALSE) == 0) {
				ip2dbg(("ip_cgtp_filter_bcast_add: "
				    "added bcast_ire %p\n",
				    (void *)bcast_ire));

				ipif_save_ire(bcast_ire->ire_ipif,
				    bcast_ire);
				ire_refrele(bcast_ire);
			}
		}
		ire_refrele(ire_prim);
	}
}


/*
 * IP multirouting broadcast routes handling
 * Remove the broadcast ire
 */
static void
ip_cgtp_bcast_delete(ire_t *ire)
{
	ire_t *ire_dst;

	ASSERT(ire != NULL);
	ire_dst = ire_ctable_lookup(ire->ire_addr, 0, IRE_BROADCAST,
	    NULL, ALL_ZONES, NULL, MATCH_IRE_TYPE);
	if (ire_dst != NULL) {
		ire_t *ire_prim;

		ire_prim = ire_ctable_lookup(ire->ire_gateway_addr, 0,
		    IRE_BROADCAST, NULL, ALL_ZONES, NULL, MATCH_IRE_TYPE);
		if (ire_prim != NULL) {
			ipif_t *ipif_prim;
			ire_t  *bcast_ire;

			ipif_prim = ire_prim->ire_ipif;

			ip2dbg(("ip_cgtp_filter_bcast_delete: "
			    "ire_dst %p, ire_prim %p, ipif_prim %p\n",
			    (void *)ire_dst, (void *)ire_prim,
			    (void *)ipif_prim));

			bcast_ire = ire_ctable_lookup(ire->ire_addr,
			    ire->ire_gateway_addr,
			    IRE_BROADCAST,
			    ipif_prim, ALL_ZONES,
			    NULL,
			    MATCH_IRE_TYPE | MATCH_IRE_GW | MATCH_IRE_IPIF |
			    MATCH_IRE_MASK);

			if (bcast_ire != NULL) {
				ip2dbg(("ip_cgtp_filter_bcast_delete: "
				    "looked up bcast_ire %p\n",
				    (void *)bcast_ire));
				ipif_remove_ire(bcast_ire->ire_ipif,
					bcast_ire);
				ire_delete(bcast_ire);
			}
			ire_refrele(ire_prim);
		}
		ire_refrele(ire_dst);
	}
}

/*
 * IPsec hardware acceleration capabilities related functions.
 */

/*
 * Free a per-ill IPsec capabilities structure.
 */
static void
ill_ipsec_capab_free(ill_ipsec_capab_t *capab)
{
	if (capab->auth_hw_algs != NULL)
		kmem_free(capab->auth_hw_algs, capab->algs_size);
	if (capab->encr_hw_algs != NULL)
		kmem_free(capab->encr_hw_algs, capab->algs_size);
	if (capab->encr_algparm != NULL)
		kmem_free(capab->encr_algparm, capab->encr_algparm_size);
	kmem_free(capab, sizeof (ill_ipsec_capab_t));
}

/*
 * Allocate a new per-ill IPsec capabilities structure. This structure
 * is specific to an IPsec protocol (AH or ESP). It is implemented as
 * an array which specifies, for each algorithm, whether this algorithm
 * is supported by the ill or not.
 */
static ill_ipsec_capab_t *
ill_ipsec_capab_alloc(void)
{
	ill_ipsec_capab_t *capab;
	uint_t nelems;

	capab = kmem_zalloc(sizeof (ill_ipsec_capab_t), KM_NOSLEEP);
	if (capab == NULL)
		return (NULL);

	/* we need one bit per algorithm */
	nelems = MAX_IPSEC_ALGS / BITS(ipsec_capab_elem_t);
	capab->algs_size = nelems * sizeof (ipsec_capab_elem_t);

	/* allocate memory to store algorithm flags */
	capab->encr_hw_algs = kmem_zalloc(capab->algs_size, KM_NOSLEEP);
	if (capab->encr_hw_algs == NULL)
		goto nomem;
	capab->auth_hw_algs = kmem_zalloc(capab->algs_size, KM_NOSLEEP);
	if (capab->auth_hw_algs == NULL)
		goto nomem;
	/*
	 * Leave encr_algparm NULL for now since we won't need it half
	 * the time
	 */
	return (capab);

nomem:
	ill_ipsec_capab_free(capab);
	return (NULL);
}

/*
 * Resize capability array.  Since we're exclusive, this is OK.
 */
static boolean_t
ill_ipsec_capab_resize_algparm(ill_ipsec_capab_t *capab, int algid)
{
	ipsec_capab_algparm_t *nalp, *oalp;
	uint32_t olen, nlen;

	oalp = capab->encr_algparm;
	olen = capab->encr_algparm_size;

	if (oalp != NULL) {
		if (algid < capab->encr_algparm_end)
			return (B_TRUE);
	}

	nlen = (algid + 1) * sizeof (*nalp);
	nalp = kmem_zalloc(nlen, KM_NOSLEEP);
	if (nalp == NULL)
		return (B_FALSE);

	if (oalp != NULL) {
		bcopy(oalp, nalp, olen);
		kmem_free(oalp, olen);
	}
	capab->encr_algparm = nalp;
	capab->encr_algparm_size = nlen;
	capab->encr_algparm_end = algid + 1;

	return (B_TRUE);
}

/*
 * Compare the capabilities of the specified ill with the protocol
 * and algorithms specified by the SA passed as argument.
 * If they match, returns B_TRUE, B_FALSE if they do not match.
 *
 * The ill can be passed as a pointer to it, or by specifying its index
 * and whether it is an IPv6 ill (ill_index and ill_isv6 arguments).
 *
 * Called by ipsec_out_is_accelerated() do decide whether an outbound
 * packet is eligible for hardware acceleration, and by
 * ill_ipsec_capab_send_all() to decide whether a SA must be sent down
 * to a particular ill.
 */
boolean_t
ipsec_capab_match(ill_t *ill, uint_t ill_index, boolean_t ill_isv6,
    ipsa_t *sa)
{
	boolean_t sa_isv6;
	uint_t algid;
	struct ill_ipsec_capab_s *cpp;
	boolean_t need_refrele = B_FALSE;

	if (ill == NULL) {
		ill = ill_lookup_on_ifindex(ill_index, ill_isv6, NULL,
		    NULL, NULL, NULL);
		if (ill == NULL) {
			ip0dbg(("ipsec_capab_match: ill doesn't exist\n"));
			return (B_FALSE);
		}
		need_refrele = B_TRUE;
	}

	/*
	 * Use the address length specified by the SA to determine
	 * if it corresponds to a IPv6 address, and fail the matching
	 * if the isv6 flag passed as argument does not match.
	 * Note: this check is used for SADB capability checking before
	 * sending SA information to an ill.
	 */
	sa_isv6 = (sa->ipsa_addrfam == AF_INET6);
	if (sa_isv6 != ill_isv6)
		/* protocol mismatch */
		goto done;

	/*
	 * Check if the ill supports the protocol, algorithm(s) and
	 * key size(s) specified by the SA, and get the pointers to
	 * the algorithms supported by the ill.
	 */
	switch (sa->ipsa_type) {

	case SADB_SATYPE_ESP:
		if (!(ill->ill_capabilities & ILL_CAPAB_ESP))
			/* ill does not support ESP acceleration */
			goto done;
		cpp = ill->ill_ipsec_capab_esp;
		algid = sa->ipsa_auth_alg;
		if (!IPSEC_ALG_IS_ENABLED(algid, cpp->auth_hw_algs))
			goto done;
		algid = sa->ipsa_encr_alg;
		if (!IPSEC_ALG_IS_ENABLED(algid, cpp->encr_hw_algs))
			goto done;
		if (algid < cpp->encr_algparm_end) {
			ipsec_capab_algparm_t *alp = &cpp->encr_algparm[algid];
			if (sa->ipsa_encrkeybits < alp->minkeylen)
				goto done;
			if (sa->ipsa_encrkeybits > alp->maxkeylen)
				goto done;
		}
		break;

	case SADB_SATYPE_AH:
		if (!(ill->ill_capabilities & ILL_CAPAB_AH))
			/* ill does not support AH acceleration */
			goto done;
		if (!IPSEC_ALG_IS_ENABLED(sa->ipsa_auth_alg,
		    ill->ill_ipsec_capab_ah->auth_hw_algs))
			goto done;
		break;
	}

	if (need_refrele)
		ill_refrele(ill);
	return (B_TRUE);
done:
	if (need_refrele)
		ill_refrele(ill);
	return (B_FALSE);
}


/*
 * Add a new ill to the list of IPsec capable ills.
 * Called from ill_capability_ipsec_ack() when an ACK was received
 * indicating that IPsec hardware processing was enabled for an ill.
 *
 * ill must point to the ill for which acceleration was enabled.
 * dl_cap must be set to DL_CAPAB_IPSEC_AH or DL_CAPAB_IPSEC_ESP.
 */
static void
ill_ipsec_capab_add(ill_t *ill, uint_t dl_cap, boolean_t sadb_resync)
{
	ipsec_capab_ill_t **ills, *cur_ill, *new_ill;
	uint_t sa_type;
	uint_t ipproto;

	ASSERT((dl_cap == DL_CAPAB_IPSEC_AH) ||
	    (dl_cap == DL_CAPAB_IPSEC_ESP));

	switch (dl_cap) {
	case DL_CAPAB_IPSEC_AH:
		sa_type = SADB_SATYPE_AH;
		ills = &ipsec_capab_ills_ah;
		ipproto = IPPROTO_AH;
		break;
	case DL_CAPAB_IPSEC_ESP:
		sa_type = SADB_SATYPE_ESP;
		ills = &ipsec_capab_ills_esp;
		ipproto = IPPROTO_ESP;
		break;
	}

	rw_enter(&ipsec_capab_ills_lock, RW_WRITER);

	/*
	 * Add ill index to list of hardware accelerators. If
	 * already in list, do nothing.
	 */
	for (cur_ill = *ills; cur_ill != NULL &&
	    (cur_ill->ill_index != ill->ill_phyint->phyint_ifindex ||
	    cur_ill->ill_isv6 != ill->ill_isv6); cur_ill = cur_ill->next)
		;

	if (cur_ill == NULL) {
		/* if this is a new entry for this ill */
		new_ill = kmem_zalloc(sizeof (ipsec_capab_ill_t), KM_NOSLEEP);
		if (new_ill == NULL) {
			rw_exit(&ipsec_capab_ills_lock);
			return;
		}

		new_ill->ill_index = ill->ill_phyint->phyint_ifindex;
		new_ill->ill_isv6 = ill->ill_isv6;
		new_ill->next = *ills;
		*ills = new_ill;
	} else if (!sadb_resync) {
		/* not resync'ing SADB and an entry exists for this ill */
		rw_exit(&ipsec_capab_ills_lock);
		return;
	}

	rw_exit(&ipsec_capab_ills_lock);

	if (ipcl_proto_fanout_v6[ipproto].connf_head != NULL)
		/*
		 * IPsec module for protocol loaded, initiate dump
		 * of the SADB to this ill.
		 */
		sadb_ill_download(ill, sa_type);
}

/*
 * Remove an ill from the list of IPsec capable ills.
 */
static void
ill_ipsec_capab_delete(ill_t *ill, uint_t dl_cap)
{
	ipsec_capab_ill_t **ills, *cur_ill, *prev_ill;

	ASSERT(dl_cap == DL_CAPAB_IPSEC_AH ||
	    dl_cap == DL_CAPAB_IPSEC_ESP);

	ills = (dl_cap == DL_CAPAB_IPSEC_AH) ? &ipsec_capab_ills_ah :
	    &ipsec_capab_ills_esp;

	rw_enter(&ipsec_capab_ills_lock, RW_WRITER);

	prev_ill = NULL;
	for (cur_ill = *ills; cur_ill != NULL && (cur_ill->ill_index !=
	    ill->ill_phyint->phyint_ifindex || cur_ill->ill_isv6 !=
	    ill->ill_isv6); prev_ill = cur_ill, cur_ill = cur_ill->next)
		;
	if (cur_ill == NULL) {
		/* entry not found */
		rw_exit(&ipsec_capab_ills_lock);
		return;
	}
	if (prev_ill == NULL) {
		/* entry at front of list */
		*ills = NULL;
	} else {
		prev_ill->next = cur_ill->next;
	}
	kmem_free(cur_ill, sizeof (ipsec_capab_ill_t));
	rw_exit(&ipsec_capab_ills_lock);
}


/*
 * Handling of DL_CONTROL_REQ messages that must be sent down to
 * an ill while having exclusive access.
 */
/* ARGSUSED */
static void
ill_ipsec_capab_send_writer(ipsq_t *ipsq, queue_t *q, mblk_t *mp, void *arg)
{
	ill_t *ill = (ill_t *)q->q_ptr;

	ill_dlpi_send(ill, mp);
}


/*
 * Called by SADB to send a DL_CONTROL_REQ message to every ill
 * supporting the specified IPsec protocol acceleration.
 * sa_type must be SADB_SATYPE_AH or SADB_SATYPE_ESP.
 * We free the mblk and, if sa is non-null, release the held referece.
 */
void
ill_ipsec_capab_send_all(uint_t sa_type, mblk_t *mp, ipsa_t *sa)
{
	ipsec_capab_ill_t *ici, *cur_ici;
	ill_t *ill;
	mblk_t *nmp, *mp_ship_list = NULL, *next_mp;

	ici = (sa_type == SADB_SATYPE_AH) ? ipsec_capab_ills_ah :
	    ipsec_capab_ills_esp;

	rw_enter(&ipsec_capab_ills_lock, RW_READER);

	for (cur_ici = ici; cur_ici != NULL; cur_ici = cur_ici->next) {
		ill = ill_lookup_on_ifindex(cur_ici->ill_index,
		    cur_ici->ill_isv6, NULL, NULL, NULL, NULL);

		/*
		 * Handle the case where the ill goes away while the SADB is
		 * attempting to send messages.  If it's going away, it's
		 * nuking its shadow SADB, so we don't care..
		 */

		if (ill == NULL)
			continue;

		if (sa != NULL) {
			/*
			 * Make sure capabilities match before
			 * sending SA to ill.
			 */
			if (!ipsec_capab_match(ill, cur_ici->ill_index,
			    cur_ici->ill_isv6, sa)) {
				ill_refrele(ill);
				continue;
			}

			mutex_enter(&sa->ipsa_lock);
			sa->ipsa_flags |= IPSA_F_HW;
			mutex_exit(&sa->ipsa_lock);
		}

		/*
		 * Copy template message, and add it to the front
		 * of the mblk ship list. We want to avoid holding
		 * the ipsec_capab_ills_lock while sending the
		 * message to the ills.
		 *
		 * The b_next and b_prev are temporarily used
		 * to build a list of mblks to be sent down, and to
		 * save the ill to which they must be sent.
		 */
		nmp = copymsg(mp);
		if (nmp == NULL) {
			ill_refrele(ill);
			continue;
		}
		ASSERT(nmp->b_next == NULL && nmp->b_prev == NULL);
		nmp->b_next = mp_ship_list;
		mp_ship_list = nmp;
		nmp->b_prev = (mblk_t *)ill;
	}

	rw_exit(&ipsec_capab_ills_lock);

	nmp = mp_ship_list;
	while (nmp != NULL) {
		/* restore the mblk to a sane state */
		next_mp = nmp->b_next;
		nmp->b_next = NULL;
		ill = (ill_t *)nmp->b_prev;
		nmp->b_prev = NULL;

		/*
		 * Ship the mblk to the ill, must be exclusive. Keep the
		 * reference to the ill as qwriter_ip() does a ill_referele().
		 */
		(void) qwriter_ip(NULL, ill, ill->ill_wq, nmp,
		    ill_ipsec_capab_send_writer, NEW_OP, B_TRUE);

		nmp = next_mp;
	}

	if (sa != NULL)
		IPSA_REFRELE(sa);
	freemsg(mp);
}


/*
 * Derive an interface id from the link layer address.
 * Knows about IEEE 802 and IEEE EUI-64 mappings.
 */
static boolean_t
ip_ether_v6intfid(uint_t phys_length, uint8_t *phys_addr, in6_addr_t *v6addr)
{
	char		*addr;

	if (phys_length != ETHERADDRL)
		return (B_FALSE);

	/* Form EUI-64 like address */
	addr = (char *)&v6addr->s6_addr32[2];
	bcopy((char *)phys_addr, addr, 3);
	addr[0] ^= 0x2;		/* Toggle Universal/Local bit */
	addr[3] = (char)0xff;
	addr[4] = (char)0xfe;
	bcopy((char *)phys_addr + 3, addr + 5, 3);
	return (B_TRUE);
}

/* ARGSUSED */
static boolean_t
ip_nodef_v6intfid(uint_t phys_length, uint8_t *phys_addr, in6_addr_t *v6addr)
{
	return (B_FALSE);
}

/* ARGSUSED */
static boolean_t
ip_ether_v6mapinfo(uint_t lla_length, uint8_t *bphys_addr, uint8_t *maddr,
    uint32_t *hw_start, in6_addr_t *v6_extract_mask)
{
	/*
	 * Multicast address mappings used over Ethernet/802.X.
	 * This address is used as a base for mappings.
	 */
	static uint8_t ipv6_g_phys_multi_addr[] = {0x33, 0x33, 0x00,
	    0x00, 0x00, 0x00};

	/*
	 * Extract low order 32 bits from IPv6 multicast address.
	 * Or that into the link layer address, starting from the
	 * second byte.
	 */
	*hw_start = 2;
	v6_extract_mask->s6_addr32[0] = 0;
	v6_extract_mask->s6_addr32[1] = 0;
	v6_extract_mask->s6_addr32[2] = 0;
	v6_extract_mask->s6_addr32[3] = 0xffffffffU;
	bcopy(ipv6_g_phys_multi_addr, maddr, lla_length);
	return (B_TRUE);
}

/*
 * Indicate by return value whether multicast is supported. If not,
 * this code should not touch/change any parameters.
 */
/* ARGSUSED */
static boolean_t
ip_ether_v4mapinfo(uint_t phys_length, uint8_t *bphys_addr, uint8_t *maddr,
    uint32_t *hw_start, ipaddr_t *extract_mask)
{
	/*
	 * Multicast address mappings used over Ethernet/802.X.
	 * This address is used as a base for mappings.
	 */
	static uint8_t ip_g_phys_multi_addr[] = { 0x01, 0x00, 0x5e,
	    0x00, 0x00, 0x00 };

	if (phys_length != ETHERADDRL)
		return (B_FALSE);

	*extract_mask = htonl(0x007fffff);
	*hw_start = 2;
	bcopy(ip_g_phys_multi_addr, maddr, ETHERADDRL);
	return (B_TRUE);
}

/*
 * Derive IPoIB interface id from the link layer address.
 */
static boolean_t
ip_ib_v6intfid(uint_t phys_length, uint8_t *phys_addr, in6_addr_t *v6addr)
{
	char		*addr;

	if (phys_length != 20)
		return (B_FALSE);
	addr = (char *)&v6addr->s6_addr32[2];
	bcopy(phys_addr + 12, addr, 8);
	/*
	 * In IBA 1.1 timeframe, some vendors erroneously set the u/l bit
	 * in the globally assigned EUI-64 GUID to 1, in violation of IEEE
	 * rules. In these cases, the IBA considers these GUIDs to be in
	 * "Modified EUI-64" format, and thus toggling the u/l bit is not
	 * required; vendors are required not to assign global EUI-64's
	 * that differ only in u/l bit values, thus guaranteeing uniqueness
	 * of the interface identifier. Whether the GUID is in modified
	 * or proper EUI-64 format, the ipv6 identifier must have the u/l
	 * bit set to 1.
	 */
	addr[0] |= 2;			/* Set Universal/Local bit to 1 */
	return (B_TRUE);
}

/*
 * Note on mapping from multicast IP addresses to IPoIB multicast link
 * addresses. IPoIB multicast link addresses are based on IBA link addresses.
 * The format of an IPoIB multicast address is:
 *
 *  4 byte QPN      Scope Sign.  Pkey
 * +--------------------------------------------+
 * | 00FFFFFF | FF | 1X | X01B | Pkey | GroupID |
 * +--------------------------------------------+
 *
 * The Scope and Pkey components are properties of the IBA port and
 * network interface. They can be ascertained from the broadcast address.
 * The Sign. part is the signature, and is 401B for IPv4 and 601B for IPv6.
 */

static boolean_t
ip_ib_v6mapinfo(uint_t lla_length, uint8_t *bphys_addr, uint8_t *maddr,
    uint32_t *hw_start, in6_addr_t *v6_extract_mask)
{
	/*
	 * Base IPoIB IPv6 multicast address used for mappings.
	 * Does not contain the IBA scope/Pkey values.
	 */
	static uint8_t ipv6_g_phys_ibmulti_addr[] = { 0x00, 0xff, 0xff, 0xff,
	    0xff, 0x10, 0x60, 0x1b, 0x00, 0x00, 0x00, 0x00,
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

	/*
	 * Extract low order 80 bits from IPv6 multicast address.
	 * Or that into the link layer address, starting from the
	 * sixth byte.
	 */
	*hw_start = 6;
	bcopy(ipv6_g_phys_ibmulti_addr, maddr, lla_length);

	/*
	 * Now fill in the IBA scope/Pkey values from the broadcast address.
	 */
	*(maddr + 5) = *(bphys_addr + 5);
	*(maddr + 8) = *(bphys_addr + 8);
	*(maddr + 9) = *(bphys_addr + 9);

	v6_extract_mask->s6_addr32[0] = 0;
	v6_extract_mask->s6_addr32[1] = htonl(0x0000ffff);
	v6_extract_mask->s6_addr32[2] = 0xffffffffU;
	v6_extract_mask->s6_addr32[3] = 0xffffffffU;
	return (B_TRUE);
}

static boolean_t
ip_ib_v4mapinfo(uint_t phys_length, uint8_t *bphys_addr, uint8_t *maddr,
    uint32_t *hw_start, ipaddr_t *extract_mask)
{
	/*
	 * Base IPoIB IPv4 multicast address used for mappings.
	 * Does not contain the IBA scope/Pkey values.
	 */
	static uint8_t ipv4_g_phys_ibmulti_addr[] = { 0x00, 0xff, 0xff, 0xff,
	    0xff, 0x10, 0x40, 0x1b, 0x00, 0x00, 0x00, 0x00,
	    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

	if (phys_length != sizeof (ipv4_g_phys_ibmulti_addr))
		return (B_FALSE);

	/*
	 * Extract low order 28 bits from IPv4 multicast address.
	 * Or that into the link layer address, starting from the
	 * sixteenth byte.
	 */
	*extract_mask = htonl(0x0fffffff);
	*hw_start = 16;
	bcopy(ipv4_g_phys_ibmulti_addr, maddr, phys_length);

	/*
	 * Now fill in the IBA scope/Pkey values from the broadcast address.
	 */
	*(maddr + 5) = *(bphys_addr + 5);
	*(maddr + 8) = *(bphys_addr + 8);
	*(maddr + 9) = *(bphys_addr + 9);
	return (B_TRUE);
}

/*
 * Returns B_TRUE if an ipif is present in the given zone, matching some flags
 * (typically IPIF_UP). If ipifp is non-null, the held ipif is returned there.
 * This works for both IPv4 and IPv6; if the passed-in ill is v6, the ipif with
 * the link-local address is preferred.
 */
boolean_t
ipif_lookup_zoneid(ill_t *ill, zoneid_t zoneid, int flags, ipif_t **ipifp)
{
	ipif_t	*ipif;
	ipif_t	*maybe_ipif = NULL;

	mutex_enter(&ill->ill_lock);
	if (ill->ill_state_flags & ILL_CONDEMNED) {
		mutex_exit(&ill->ill_lock);
		if (ipifp != NULL)
			*ipifp = NULL;
		return (B_FALSE);
	}
	for (ipif = ill->ill_ipif; ipif != NULL; ipif = ipif->ipif_next) {
		if (!IPIF_CAN_LOOKUP(ipif))
			continue;
		if (zoneid != ALL_ZONES && ipif->ipif_zoneid != zoneid &&
		    ipif->ipif_zoneid != ALL_ZONES)
			continue;
		if ((ipif->ipif_flags & flags) != flags)
			continue;

		if (ipifp == NULL) {
			mutex_exit(&ill->ill_lock);
			ASSERT(maybe_ipif == NULL);
			return (B_TRUE);
		}
		if (!ill->ill_isv6 ||
		    IN6_IS_ADDR_LINKLOCAL(&ipif->ipif_v6src_addr)) {
			ipif_refhold_locked(ipif);
			mutex_exit(&ill->ill_lock);
			*ipifp = ipif;
			return (B_TRUE);
		}
		if (maybe_ipif == NULL)
			maybe_ipif = ipif;
	}
	if (ipifp != NULL) {
		if (maybe_ipif != NULL)
			ipif_refhold_locked(maybe_ipif);
		*ipifp = maybe_ipif;
	}
	mutex_exit(&ill->ill_lock);
	return (maybe_ipif != NULL);
}

/*
 * Same as ipif_lookup_zoneid() but looks at all the ills in the same group.
 */
boolean_t
ipif_lookup_zoneid_group(ill_t *ill, zoneid_t zoneid, int flags, ipif_t **ipifp)
{
	ill_t *illg;

	/*
	 * We look at the passed-in ill first without grabbing ill_g_lock.
	 */
	if (ipif_lookup_zoneid(ill, zoneid, flags, ipifp)) {
		return (B_TRUE);
	}
	rw_enter(&ill_g_lock, RW_READER);
	if (ill->ill_group == NULL) {
		/* ill not in a group */
		rw_exit(&ill_g_lock);
		return (B_FALSE);
	}

	/*
	 * There's no ipif in the zone on ill, however ill is part of an IPMP
	 * group. We need to look for an ipif in the zone on all the ills in the
	 * group.
	 */
	illg = ill->ill_group->illgrp_ill;
	do {
		/*
		 * We don't call ipif_lookup_zoneid() on ill as we already know
		 * that it's not there.
		 */
		if (illg != ill &&
		    ipif_lookup_zoneid(illg, zoneid, flags, ipifp)) {
			break;
		}
	} while ((illg = illg->ill_group_next) != NULL);
	rw_exit(&ill_g_lock);
	return (illg != NULL);
}

/*
 * Check if this ill is only being used to send ICMP probes for IPMP
 */
boolean_t
ill_is_probeonly(ill_t *ill)
{
	/*
	 * Check if the interface is FAILED, or INACTIVE
	 */
	if (ill->ill_phyint->phyint_flags & (PHYI_FAILED|PHYI_INACTIVE))
		return (B_TRUE);

	return (B_FALSE);
}