1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright 2012 Milan Jurik. All rights reserved. 24 */ 25 26 #include <sys/types.h> 27 #include <sys/time.h> 28 #include <sys/param.h> 29 #include <sys/systm.h> 30 #include <sys/signal.h> 31 #include <sys/sysmacros.h> 32 #include <sys/cmn_err.h> 33 #include <sys/user.h> 34 #include <sys/proc.h> 35 #include <sys/task.h> 36 #include <sys/project.h> 37 #include <sys/klwp.h> 38 #include <sys/vnode.h> 39 #include <sys/file.h> 40 #include <sys/fcntl.h> 41 #include <sys/flock.h> 42 #include <sys/var.h> 43 #include <sys/stream.h> 44 #include <sys/strsubr.h> 45 #include <sys/conf.h> 46 #include <sys/class.h> 47 #include <sys/ts.h> 48 #include <sys/rt.h> 49 #include <sys/exec.h> 50 #include <sys/exechdr.h> 51 #include <sys/buf.h> 52 #include <sys/resource.h> 53 #include <vm/seg.h> 54 #include <vm/pvn.h> 55 #include <vm/seg_kmem.h> 56 #include <sys/vmparam.h> 57 #include <sys/machparam.h> 58 #include <sys/utsname.h> 59 #include <sys/kmem.h> 60 #include <sys/stack.h> 61 #include <sys/modctl.h> 62 #include <sys/fdbuffer.h> 63 #include <sys/cyclic_impl.h> 64 #include <sys/disp.h> 65 #include <sys/tuneable.h> 66 #include <sys/systeminfo.h> 67 68 #include <sys/vmem.h> 69 #include <sys/clock.h> 70 #include <sys/clock_impl.h> 71 #include <sys/serializer.h> 72 73 /* 74 * The following few lines describe generic things that must be compiled 75 * into the booted executable (unix) rather than genunix or any other 76 * module because they're required by crash dump readers, etc. 77 */ 78 struct modctl modules; /* head of linked list of modules */ 79 char *default_path; /* default module loading path */ 80 struct swapinfo *swapinfo; /* protected by the swapinfo_lock */ 81 proc_t *practive; /* active process list */ 82 uint_t nproc; /* current number of processes */ 83 proc_t p0; /* process 0 */ 84 struct plock p0lock; /* p0's p_lock */ 85 klwp_t lwp0; /* t0's lwp */ 86 task_t *task0p; /* task 0 */ 87 kproject_t *proj0p; /* location of project 0 */ 88 89 /* 90 * The following are "implementation architecture" dependent constants made 91 * available here in the form of initialized data for use by "implementation 92 * architecture" independent modules. See machparam.h. 93 */ 94 const unsigned long _pagesize = (unsigned long)PAGESIZE; 95 const unsigned int _pageshift = (unsigned int)PAGESHIFT; 96 const unsigned long _pageoffset = (unsigned long)PAGEOFFSET; 97 /* 98 * XXX - This value pagemask has to be a 64bit size because 99 * large file support uses this mask on offsets which are 64 bit size. 100 * using unsigned leaves the higher 32 bits value as zero thus 101 * corrupting offset calculations in the file system and VM. 102 */ 103 const u_longlong_t _pagemask = (u_longlong_t)PAGEMASK; 104 const unsigned long _mmu_pagesize = (unsigned long)MMU_PAGESIZE; 105 const unsigned int _mmu_pageshift = (unsigned int)MMU_PAGESHIFT; 106 const unsigned long _mmu_pageoffset = (unsigned long)MMU_PAGEOFFSET; 107 const unsigned long _mmu_pagemask = (unsigned long)MMU_PAGEMASK; 108 uintptr_t _kernelbase = (uintptr_t)KERNELBASE; 109 uintptr_t _userlimit = (uintptr_t)USERLIMIT; 110 uintptr_t _userlimit32 = (uintptr_t)USERLIMIT32; 111 const uintptr_t _argsbase = (uintptr_t)ARGSBASE; 112 const unsigned int _diskrpm = (unsigned int)DISKRPM; 113 const unsigned long _pgthresh = (unsigned long)PGTHRESH; 114 const unsigned int _maxslp = (unsigned int)MAXSLP; 115 const unsigned long _maxhandspreadpages = (unsigned long)MAXHANDSPREADPAGES; 116 const int _ncpu = (int)NCPU; 117 const int _ncpu_log2 = (int)NCPU_LOG2; 118 const int _ncpu_p2 = (int)NCPU_P2; 119 const unsigned long _defaultstksz = (unsigned long)DEFAULTSTKSZ; 120 const unsigned int _nbpg = (unsigned int)MMU_PAGESIZE; 121 122 /* 123 * System parameter formulae. 124 * 125 * This file is copied into each directory where we compile 126 * the kernel; it should be modified there to suit local taste 127 * if necessary. 128 */ 129 130 /* 131 * Default hz is 100, but if we set hires_tick we get higher resolution 132 * clock behavior (currently defined to be 1000 hz). Higher values seem 133 * to work, but are not supported. 134 * 135 * If we do decide to play with higher values, remember that hz should 136 * satisfy the following constraints to avoid integer round-off problems: 137 * 138 * (1) hz should be in the range 100 <= hz <= MICROSEC. If hz exceeds 139 * MICROSEC, usec_per_tick will be zero and lots of stuff will break. 140 * Similarly, if hz < 100 then hz / 100 == 0 and stuff will break. 141 * 142 * (2) If hz <= 1000, it should be both a multiple of 100 and a 143 * divisor of 1000. 144 * 145 * (3) If hz > 1000, it should be both a multiple of 1000 and a 146 * divisor of MICROSEC. 147 * 148 * Thus the only reasonable values of hz (i.e. the values that won't 149 * cause roundoff error) are: 100, 200, 500, 1000, 2000, 4000, 5000, 150 * 8000, 10000, 20000, 25000, 40000, 50000, 100000, 125000, 200000, 151 * 250000, 500000, 1000000. As of this writing (1996) a clock rate 152 * of more than about 10 kHz seems utterly ridiculous, although 153 * this observation will no doubt seem quaintly amusing one day. 154 */ 155 #define HIRES_HZ_DEFAULT 1000 156 157 int hz = HZ_DEFAULT; 158 int hires_hz = HIRES_HZ_DEFAULT; 159 160 int hires_tick = 0; 161 int cpu_decay_factor = 10; /* this is no longer tied to clock */ 162 int max_hres_adj; /* maximum adjustment of hrtime per tick */ 163 int tick_per_msec; /* clock ticks per millisecond (zero if hz < 1000) */ 164 165 /* 166 * Milliseconds, Microseconds, and Nanoseconds per clock tick 167 * 168 * Note: 169 * msec_per_tick is zero if hz > 1000 170 */ 171 int msec_per_tick; 172 int usec_per_tick; 173 int nsec_per_tick; 174 175 /* 176 * Time Resolution values. These are defined in condvar.h and initialized in 177 * param_init(). Consumers of cv_reltimedwait() and cv_reltimedwait_sig() 178 * need to specify how accurate the timeout argument should be through 179 * one of these values. The intention is to allow the underlying implementation 180 * to anticipate or defer the expiration of timeouts, preventing unnecessary 181 * wakeups by batch processing similarly expiring events. 182 */ 183 time_res_t time_res[TR_COUNT]; 184 185 /* 186 * Setting "snooping" to a non-zero value will cause a deadman panic if 187 * snoop_interval microseconds elapse without lbolt increasing. The default 188 * snoop_interval is 50 seconds. 189 */ 190 #define SNOOP_INTERVAL_MIN (MICROSEC) 191 #define SNOOP_INTERVAL_DEFAULT (50 * MICROSEC) 192 193 int snooping = 0; 194 uint_t snoop_interval = SNOOP_INTERVAL_DEFAULT; 195 196 /* 197 * Tables of initialization functions, called from main(). 198 */ 199 200 extern void system_taskq_init(void); 201 extern void binit(void); 202 extern void space_init(void); 203 extern void dnlc_init(void); 204 extern void vfsinit(void); 205 extern void finit(void); 206 extern void strinit(void); 207 extern void flk_init(void); 208 extern void ftrace_init(void); 209 extern void softcall_init(void); 210 extern void ttyinit(void); 211 extern void schedctl_init(void); 212 extern void deadman_init(void); 213 extern void clock_timer_init(void); 214 extern void clock_realtime_init(void); 215 extern void clock_highres_init(void); 216 extern void clock_tick_mp_init(void); 217 extern void cu_init(void); 218 extern void callout_mp_init(void); 219 extern void cpu_seq_tbl_init(void); 220 221 void (*init_tbl[])(void) = { 222 system_taskq_init, 223 binit, 224 space_init, 225 dnlc_init, 226 vfsinit, 227 finit, 228 strinit, 229 serializer_init, 230 softcall_init, 231 ttyinit, 232 as_init, 233 pvn_init, 234 anon_init, 235 segvn_init, 236 flk_init, 237 cpu_seq_tbl_init, 238 schedctl_init, 239 fdb_init, 240 deadman_init, 241 clock_timer_init, 242 clock_realtime_init, 243 clock_highres_init, 244 0 245 }; 246 247 248 #if defined(__sparc) 249 extern void siron_mp_init(); 250 #endif 251 252 /* 253 * Any per cpu resources should be initialized via 254 * an entry in mp_init_tbl(). 255 */ 256 void (*mp_init_tbl[])(void) = { 257 ftrace_init, 258 cyclic_mp_init, 259 #if defined(__sparc) 260 siron_mp_init, 261 #endif 262 clock_tick_mp_init, 263 cu_init, 264 callout_mp_init, 265 0 266 }; 267 268 int maxusers; /* kitchen-sink knob for dynamic configuration */ 269 270 /* 271 * pidmax -- highest pid value assigned by the system 272 * Settable in /etc/system 273 */ 274 int pidmax = DEFAULT_MAXPID; 275 276 /* 277 * jump_pid - if set, this value is where pid numbers should start 278 * after the first few system pids (0-3) are used. If 0, pids are 279 * chosen in the usual way. This variable can be used to quickly 280 * create large pids (by setting it to 100000, for example). pids 281 * less than this value will never be chosen. 282 */ 283 pid_t jump_pid = DEFAULT_JUMPPID; 284 285 /* 286 * autoup -- used in struct var for dynamic config of the age a delayed-write 287 * buffer must be in seconds before bdflush will write it out. 288 */ 289 #define DEFAULT_AUTOUP 30 290 int autoup = DEFAULT_AUTOUP; 291 292 /* 293 * bufhwm -- tuneable variable for struct var for v_bufhwm. 294 * high water mark for buffer cache mem usage in units of K bytes. 295 * 296 * bufhwm_pct -- ditto, but given in % of physmem. 297 */ 298 int bufhwm = 0; 299 int bufhwm_pct = 0; 300 301 /* 302 * Process table. 303 */ 304 int maxpid; 305 int max_nprocs; /* set in param_init() */ 306 int maxuprc; /* set in param_init() */ 307 int reserved_procs; 308 int nthread = 1; 309 310 /* 311 * UFS tunables 312 */ 313 int ufs_ninode; /* declared here due to backwards compatibility */ 314 int ndquot; /* declared here due to backwards compatibility */ 315 316 /* 317 * Exec switch table. This is used by the generic exec module 318 * to switch out to the desired executable type, based on the 319 * magic number. The currently supported types are ELF, a.out 320 * (both NMAGIC and ZMAGIC), interpreter (#!) files, 321 * and Java executables. 322 */ 323 /* 324 * Magic numbers 325 */ 326 short elfmagic = 0x7f45; 327 short intpmagic = 0x2321; 328 short jmagic = 0x504b; 329 330 #if defined(__sparc) 331 short aout_nmagic = NMAGIC; 332 short aout_zmagic = ZMAGIC; 333 short aout_omagic = OMAGIC; 334 #endif 335 short nomagic = 0; 336 337 /* 338 * Magic strings 339 */ 340 #define ELF32MAGIC_STRING "\x7f""ELF\x1" 341 #define ELF64MAGIC_STRING "\x7f""ELF\x2" 342 #define INTPMAGIC_STRING "#!" 343 #define JAVAMAGIC_STRING "PK\003\004" 344 #define AOUT_OMAGIC_STRING "\x1""\x07" /* 0407 */ 345 #define AOUT_NMAGIC_STRING "\x1""\x08" /* 0410 */ 346 #define AOUT_ZMAGIC_STRING "\x1""\x0b" /* 0413 */ 347 #define NOMAGIC_STRING "" 348 349 #define SHBIN_CNTL(x) ((x)&037) 350 #define SHBINMAGIC_STRING {SHBIN_CNTL('k'), SHBIN_CNTL('s'), SHBIN_CNTL('h'), 0} 351 #define SHBINMAGIC_LEN 4 352 353 char elf32magicstr[] = ELF32MAGIC_STRING; 354 char elf64magicstr[] = ELF64MAGIC_STRING; 355 char intpmagicstr[] = INTPMAGIC_STRING; 356 char shbinmagicstr[] = SHBINMAGIC_STRING; 357 char javamagicstr[] = JAVAMAGIC_STRING; 358 #if defined(__sparc) 359 char aout_nmagicstr[] = AOUT_NMAGIC_STRING; 360 char aout_zmagicstr[] = AOUT_ZMAGIC_STRING; 361 char aout_omagicstr[] = AOUT_OMAGIC_STRING; 362 #endif 363 char nomagicstr[] = NOMAGIC_STRING; 364 365 char *execswnames[] = { 366 "elfexec", /* Elf32 */ 367 #ifdef _LP64 368 "elfexec", /* Elf64 */ 369 #endif 370 "intpexec", 371 "shbinexec", 372 "javaexec", 373 #if defined(__sparc) 374 "aoutexec", 375 "aoutexec", 376 "aoutexec", 377 #endif 378 NULL, 379 NULL, 380 NULL 381 }; 382 383 struct execsw execsw[] = { 384 { elf32magicstr, 0, 5, NULL, NULL, NULL }, 385 #ifdef _LP64 386 { elf64magicstr, 0, 5, NULL, NULL, NULL }, 387 #endif 388 { intpmagicstr, 0, 2, NULL, NULL, NULL }, 389 { shbinmagicstr, 0, SHBINMAGIC_LEN, NULL, NULL, NULL }, 390 { javamagicstr, 0, 4, NULL, NULL, NULL }, 391 #if defined(__sparc) 392 { aout_zmagicstr, 2, 2, NULL, NULL, NULL }, 393 { aout_nmagicstr, 2, 2, NULL, NULL, NULL }, 394 { aout_omagicstr, 2, 2, NULL, NULL, NULL }, 395 #endif 396 { nomagicstr, 0, 0, NULL, NULL, NULL }, 397 { nomagicstr, 0, 0, NULL, NULL, NULL }, 398 { nomagicstr, 0, 0, NULL, NULL, NULL }, 399 { nomagicstr, 0, 0, NULL, NULL, NULL } 400 }; 401 int nexectype = sizeof (execsw) / sizeof (execsw[0]); /* # of exec types */ 402 kmutex_t execsw_lock; /* Used for allocation of execsw entries */ 403 404 /* 405 * symbols added to make changing max-file-descriptors 406 * simple via /etc/system 407 */ 408 #define RLIM_FD_CUR 0x100 409 #define RLIM_FD_MAX 0x10000 410 411 uint_t rlim_fd_cur = RLIM_FD_CUR; 412 uint_t rlim_fd_max = RLIM_FD_MAX; 413 414 /* 415 * (Default resource limits were formerly declared here, but are now provided by 416 * the more general resource controls framework.) 417 */ 418 419 /* 420 * STREAMS tunables 421 */ 422 int nstrpush = 9; /* maximum # of modules/drivers on a stream */ 423 ssize_t strctlsz = 1024; /* maximum size of user-generated M_PROTO */ 424 ssize_t strmsgsz = 0x10000; /* maximum size of user-generated M_DATA */ 425 /* for `strmsgsz', zero means unlimited */ 426 /* 427 * Filesystem tunables 428 */ 429 int rstchown = 1; /* POSIX_CHOWN_RESTRICTED is enabled */ 430 int ngroups_max = NGROUPS_MAX_DEFAULT; 431 432 /* 433 * generic scheduling stuff 434 * 435 * Configurable parameters for RT and TS are in the respective 436 * scheduling class modules. 437 */ 438 439 pri_t maxclsyspri = MAXCLSYSPRI; 440 pri_t minclsyspri = MINCLSYSPRI; 441 char sys_name[] = "SYS"; 442 443 extern pri_t sys_init(id_t, int, classfuncs_t **); 444 extern classfuncs_t sys_classfuncs; 445 446 sclass_t sclass[] = { 447 { "SYS", sys_init, &sys_classfuncs, STATIC_SCHED, 0 }, 448 { "", NULL, NULL, NULL, 0 }, 449 { "", NULL, NULL, NULL, 0 }, 450 { "", NULL, NULL, NULL, 0 }, 451 { "", NULL, NULL, NULL, 0 }, 452 { "", NULL, NULL, NULL, 0 }, 453 { "", NULL, NULL, NULL, 0 }, 454 { "", NULL, NULL, NULL, 0 }, 455 { "", NULL, NULL, NULL, 0 }, 456 { "", NULL, NULL, NULL, 0 } 457 }; 458 459 int loaded_classes = 1; /* for loaded classes */ 460 kmutex_t class_lock; /* lock for class[] */ 461 462 int nclass = sizeof (sclass) / sizeof (sclass_t); 463 char initcls[] = "TS"; 464 char *defaultclass = initcls; 465 466 /* 467 * Tunable system parameters. 468 */ 469 470 /* 471 * The integers tune_* are done this way so that the tune 472 * data structure may be "tuned" if necessary from the /etc/system 473 * file. The tune data structure is initialized in param_init(); 474 */ 475 476 tune_t tune; 477 478 /* 479 * If freemem < t_getpgslow, then start to steal pages from processes. 480 */ 481 int tune_t_gpgslo = 25; 482 483 /* 484 * Rate at which fsflush is run, in seconds. 485 */ 486 #define DEFAULT_TUNE_T_FSFLUSHR 1 487 int tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR; 488 489 /* 490 * The minimum available resident (not swappable) memory to maintain 491 * in order to avoid deadlock. In pages. 492 */ 493 int tune_t_minarmem = 25; 494 495 /* 496 * The minimum available swappable memory to maintain in order to avoid 497 * deadlock. In pages. 498 */ 499 int tune_t_minasmem = 25; 500 501 int tune_t_flckrec = 512; /* max # of active frlocks */ 502 503 /* 504 * Number of currently available pages that cannot be 'locked' 505 * This is set in init_pages_pp_maximum, and must be initialized 506 * to zero here to detect an override in /etc/system 507 */ 508 pgcnt_t pages_pp_maximum = 0; 509 510 int boothowto; /* boot flags passed to kernel */ 511 struct var v; /* System Configuration Information */ 512 513 /* 514 * System Configuration Information 515 */ 516 517 /* 518 * The physical system's host identifier, expressed as a decimal string. 519 * Code should only directly access this value when writing to it (setting the 520 * physical system's host identifier). Code that reads the physical system's 521 * host identifier should use zone_get_hostid(NULL) instead. 522 */ 523 char hw_serial[HW_HOSTID_LEN] = "0"; 524 525 #if defined(__sparc) 526 527 /* 528 * On sparc machines, read hw_serial from the firmware at boot time 529 * and simply assert Oracle is the hardware provider. 530 */ 531 char architecture[] = "sparcv9"; 532 char architecture_32[] = "sparc"; 533 char hw_provider[] = "Oracle Corporation"; 534 535 #elif defined(__i386) 536 537 /* 538 * On x86 machines, read hw_serial, hw_provider and srpc_domain from 539 * /etc/bootrc at boot time. 540 */ 541 char architecture[] = "i386"; 542 char architecture_32[] = "i386"; 543 char hw_provider[SYS_NMLN] = ""; 544 545 #elif defined(__amd64) 546 547 /* 548 * On amd64 machines, read hw_serial, hw_provider and srpc_domain from 549 * /etc/bootrc at boot time. 550 */ 551 char architecture[] = "amd64"; 552 char architecture_32[] = "i386"; 553 char hw_provider[SYS_NMLN] = ""; 554 555 #else 556 #error "unknown processor architecture" 557 #endif 558 559 char srpc_domain[SYS_NMLN] = ""; 560 char platform[SYS_NMLN] = ""; /* read from the devinfo root node */ 561 562 /* Initialize isa_list */ 563 char *isa_list = architecture; 564 565 static pgcnt_t original_physmem = 0; 566 567 #define MIN_DEFAULT_MAXUSERS 8u 568 #define MAX_DEFAULT_MAXUSERS 2048u 569 #define MAX_MAXUSERS 4096u 570 571 void 572 param_preset(void) 573 { 574 original_physmem = physmem; 575 } 576 577 void 578 param_calc(int platform_max_nprocs) 579 { 580 /* 581 * Default to about one "user" per megabyte, taking into 582 * account both physical and virtual constraints. 583 * Note: 2^20 is a meg; shifting right by (20 - PAGESHIFT) 584 * converts pages to megs without integer overflow. 585 */ 586 #if defined(__sparc) 587 if (physmem > original_physmem) { 588 physmem = original_physmem; 589 cmn_err(CE_NOTE, "physmem limited to %ld", physmem); 590 } 591 #endif 592 if (maxusers == 0) { 593 pgcnt_t physmegs = physmem >> (20 - PAGESHIFT); 594 pgcnt_t virtmegs = vmem_size(heap_arena, VMEM_FREE) >> 20; 595 maxusers = MIN(MAX(MIN(physmegs, virtmegs), 596 MIN_DEFAULT_MAXUSERS), MAX_DEFAULT_MAXUSERS); 597 } 598 if (maxusers > MAX_MAXUSERS) { 599 maxusers = MAX_MAXUSERS; 600 cmn_err(CE_NOTE, "maxusers limited to %d", MAX_MAXUSERS); 601 } 602 603 if (ngroups_max > NGROUPS_MAX_DEFAULT) 604 cmn_err(CE_WARN, "ngroups_max of %d > %d, NFS AUTH_SYS will" 605 " not work properly", ngroups_max, NGROUPS_MAX_DEFAULT); 606 607 #ifdef DEBUG 608 /* 609 * The purpose of maxusers is to prevent memory overcommit. 610 * DEBUG kernels take more space, so reduce maxusers a bit. 611 */ 612 maxusers = (3 * maxusers) / 4; 613 #endif 614 615 /* 616 * We need to dynamically change any variables now so that 617 * the setting of maxusers and pidmax propagate to the other 618 * variables that are dependent on them. 619 */ 620 if (reserved_procs == 0) 621 reserved_procs = 5; 622 if (pidmax < reserved_procs || pidmax > MAX_MAXPID) 623 maxpid = MAX_MAXPID; 624 else 625 maxpid = pidmax; 626 627 /* 628 * This allows platform-dependent code to constrain the maximum 629 * number of processes allowed in case there are e.g. VM limitations 630 * with how many contexts are available. 631 */ 632 if (max_nprocs == 0) 633 max_nprocs = (10 + 16 * maxusers); 634 if (platform_max_nprocs > 0 && max_nprocs > platform_max_nprocs) 635 max_nprocs = platform_max_nprocs; 636 if (max_nprocs > maxpid) 637 max_nprocs = maxpid; 638 639 if (maxuprc == 0) 640 maxuprc = (max_nprocs - reserved_procs); 641 } 642 643 void 644 param_init(void) 645 { 646 /* 647 * Set each individual element of struct var v to be the 648 * default value. This is done this way 649 * so that a user can set the assigned integer value in the 650 * /etc/system file *IF* tuning is needed. 651 */ 652 v.v_proc = max_nprocs; /* v_proc - max # of processes system wide */ 653 v.v_maxupttl = max_nprocs - reserved_procs; 654 v.v_maxsyspri = (int)maxclsyspri; /* max global pri for sysclass */ 655 v.v_maxup = MIN(maxuprc, v.v_maxupttl); /* max procs per user */ 656 v.v_autoup = autoup; /* v_autoup - delay for delayed writes */ 657 658 /* 659 * Set each individual element of struct tune to be the 660 * default value. Each struct element This is done this way 661 * so that a user can set the assigned integer value in the 662 * /etc/system file *IF* tuning is needed. 663 */ 664 tune.t_gpgslo = tune_t_gpgslo; 665 tune.t_fsflushr = tune_t_fsflushr; 666 tune.t_minarmem = tune_t_minarmem; 667 tune.t_minasmem = tune_t_minasmem; 668 tune.t_flckrec = tune_t_flckrec; 669 670 /* 671 * Initialization for file descriptors to correct mistaken settings in 672 * /etc/system. Initialization of limits performed by resource control 673 * system. 674 */ 675 if (rlim_fd_cur > rlim_fd_max) 676 rlim_fd_cur = rlim_fd_max; 677 678 /* 679 * calculations needed if hz was set in /etc/system 680 */ 681 if (hires_tick) 682 hz = hires_hz; 683 684 tick_per_msec = hz / MILLISEC; 685 msec_per_tick = MILLISEC / hz; 686 usec_per_tick = MICROSEC / hz; 687 nsec_per_tick = NANOSEC / hz; 688 max_hres_adj = nsec_per_tick >> ADJ_SHIFT; 689 690 /* 691 * Consumers of relative timedwait functions must specify how accurately 692 * the given timeout must expire. This is currently TR_CLOCK_TICK for 693 * the vast majority of consumers, but nsec_per_tick becomes an 694 * artificial value in a tickless world. Each caller of such routines 695 * should re-evaluate their usage and specify the appropriate 696 * resolution. 697 */ 698 time_res[TR_NANOSEC] = NANOSEC / NANOSEC; 699 time_res[TR_MICROSEC] = NANOSEC / MICROSEC; 700 time_res[TR_MILLISEC] = NANOSEC / MILLISEC; 701 time_res[TR_SEC] = NANOSEC / SEC; 702 time_res[TR_CLOCK_TICK] = nsec_per_tick; 703 } 704 705 /* 706 * Validate tuneable parameters following /etc/system processing, 707 * but prior to param_init(). 708 */ 709 void 710 param_check(void) 711 { 712 #if defined(__x86) 713 if (physmem != original_physmem) { 714 cmn_err(CE_NOTE, "physmem cannot be modified to 0x%lx" 715 " via /etc/system. Please use eeprom(1M) instead.", 716 physmem); 717 physmem = original_physmem; 718 } 719 #endif 720 if (ngroups_max < NGROUPS_UMIN) 721 ngroups_max = NGROUPS_UMIN; 722 if (ngroups_max > NGROUPS_UMAX) 723 ngroups_max = NGROUPS_UMAX; 724 725 /* If we have many groups then the ucred proto message also grows. */ 726 if (ngroups_max > NGROUPS_OLDMAX && 727 strctlsz < (ngroups_max - NGROUPS_OLDMAX) * sizeof (gid_t) + 1024) { 728 strctlsz = (ngroups_max - NGROUPS_OLDMAX) * sizeof (gid_t) + 729 1024; 730 } 731 732 if (autoup <= 0) { 733 autoup = DEFAULT_AUTOUP; 734 cmn_err(CE_WARN, "autoup <= 0; defaulting to %d", autoup); 735 } 736 737 if (tune_t_fsflushr <= 0) { 738 tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR; 739 cmn_err(CE_WARN, "tune_t_fsflushr <= 0; defaulting to %d", 740 tune_t_fsflushr); 741 } 742 743 if (jump_pid < 0 || jump_pid >= pidmax) { 744 jump_pid = 0; 745 cmn_err(CE_WARN, "jump_pid < 0 or >= pidmax; ignored"); 746 } 747 748 if (snoop_interval < SNOOP_INTERVAL_MIN) { 749 snoop_interval = SNOOP_INTERVAL_DEFAULT; 750 cmn_err(CE_WARN, "snoop_interval < minimum (%d); defaulting" 751 " to %d", SNOOP_INTERVAL_MIN, SNOOP_INTERVAL_DEFAULT); 752 } 753 } 754