xref: /titanic_52/usr/src/lib/libcurses/screen/vidupdate.c (revision 7c478bd95313f5f23a4c958a745db2134aa03244)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 1997 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*	Copyright (c) 1988 AT&T	*/
/*	  All Rights Reserved	*/

/*
 * University Copyright- Copyright (c) 1982, 1986, 1988
 * The Regents of the University of California
 * All Rights Reserved
 *
 * University Acknowledgment- Portions of this document are derived from
 * software developed by the University of California, Berkeley, and its
 * contributors.
 */

#pragma ident	"%Z%%M%	%I%	%E% SMI"

/*LINTLIBRARY*/

#include <sys/types.h>
#include <stdlib.h>
#include "curses_inc.h"

#ifdef PC6300PLUS
#include <fcntl.h>
#include <sys/console.h>
#endif

#define	NUM_OF_SPECIFIC_TURN_OFFS	3
extern	chtype	bit_attributes[];

int Oldcolors[] = { COLOR_BLACK, COLOR_BLUE, COLOR_GREEN, COLOR_CYAN,
		COLOR_RED, COLOR_MAGENTA, COLOR_YELLOW, COLOR_WHITE };

void
vidupdate(chtype newmode, chtype oldmode, int (*outc)(char))
{
	bool color_terminal = (cur_term->_pairs_tbl) ? TRUE : FALSE;
	chtype oldvideo = (oldmode & A_ATTRIBUTES) & ~A_COLOR;
	chtype newvideo = (newmode & A_ATTRIBUTES) & ~A_COLOR;
	int  _change_video(chtype, chtype, int (*)(char));
	void _change_color(short, int (*)(char));

	/* if colors are used, extract the color related information from */
	/* the old and new modes and then erase color-pairs fields in	*/
	/* both arguments.						*/

	if (color_terminal) {
		/* LINTED */
		short oldcolor = (short) PAIR_NUMBER(oldmode & A_COLOR);
		/* LINTED */
		short newcolor = (short) PAIR_NUMBER(newmode & A_COLOR);
		chtype turn_off = A_COLOR;

		/* erase information about video attributes that could not */
		/* have been used with colors				   */

		if (oldcolor == 0)
			oldvideo &= ~turn_off;

		if (no_color_video != -1)
			turn_off |= (((chtype) no_color_video) << 16);

		if (oldcolor != 0)
			oldvideo &= ~turn_off;


		/* if the new mode contains color information, then first  */
		/* deal with video attributes, and then with colors.  This */
		/* way color information will overwrite video information. */

		if (newcolor != 0) {
			/* erase information about video attributes that */
			/* should not be used with colors		 */

			newvideo &= ~turn_off;

			/* if the new and the old video modes became 	*/
			/* the same don't bother with them		*/

			if (newvideo != oldvideo) {
				if ((_change_video(newvideo, oldvideo,
				    outc)) == -1) {
					_Color_pair *cur_pair =
					    &cur_term->_cur_pair;
					oldcolor = -1;
					cur_pair->background =
					    cur_pair->foreground = -1;
				}
			}
			if (newcolor != oldcolor)
				_change_color(newcolor, outc);
		}

		/* new mode doesn't contain any color information.  Deal */
		/* with colors first (possibly turning of the colors that */
		/* were contained in the oldmode, and then deal with video. */
		/* This way video attributes will overwrite colors.	*/

		else {
			if (newcolor != oldcolor)
				_change_color(newcolor, outc);
			if (newvideo != oldvideo)
				(void) _change_video(newvideo, oldvideo, outc);
		}
	} else
		(void) _change_video(newvideo, oldvideo, outc);
}


int
_change_video(chtype newmode, chtype oldmode, int (*outc)(char))
{
	int rc = 0;

	/* If you have set_attributes let the terminfo writer */
	/* worry about it. */

	if (!set_attributes) {
	/*
	 * The trick is that we want to pre-process the new and oldmode
	 * so that we now know what they will really translate to on
	 * the physical screen.
	 * In the case where some attributes are being faked
	 * we get rid of the attributes being asked for and just have
	 * STANDOUT mode set.  Therefore, if STANDOUT and UNDERLINE were
	 * on the screen but UNDERLINE was being faked to STANDOUT; and
	 * the new mode is just UNDERLINE, we will get rid of any faked
	 * modes and be left with and oldmode of STANDOUT and a new mode
	 * of STANDOUT, in which case the check for newmode and oldmode
	 * being equal will be true.
	 *
	 *
	 * This test is similar to the concept explained above.
	 * counter is the maximum attributes allowed on a terminal.
	 * For instance, on an hp/tvi950 without set_attributes
	 * the last video sequence sent will be the one the terminal
	 * will be in (on that spot).  Therefore, in setupterm.c
	 * if ceol_standout_glitch or magic_cookie_glitch is set
	 * max_attributes is set to 1.  This is because on those terminals
	 * only one attribute can be on at once.  So, we pre-process the
	 * oldmode and the newmode and only leave the bits that are
	 * significant.  In other words, if on an hp you ask for STANDOUT
	 * and UNDERLINE it will become only STANDOUT since that is the
	 * first bit that is looked at.  If then the user goes from
	 * STANDOUT and UNDERLINE to STANDOUT and REVERSE the oldmode will
	 * become STANDOUT and the newmode will become STANDOUT.
	 *
	 * This also helps the code below in that on a hp or tvi950 only
	 * one bit will ever be set so that no code has to be added to
	 * cut out early in case two attributes were asked for.
	 */

		chtype	check_faked, modes[2];
		int	counter = max_attributes, i, j, tempmode;
		int	k = (cur_term->sgr_mode == oldmode) ? 1 : 2;

		modes[0] = newmode;
		modes[1] = oldmode;

		while (k-- > 0) {
			if ((check_faked = (modes[k] &
			    cur_term->sgr_faked)) != A_NORMAL) {
				modes[k] &= ~check_faked;
				modes[k] |= A_STANDOUT;
			}

			if ((j = counter) >= 0) {
				tempmode = A_NORMAL;
				if (j > 0) {
					for (i = 0; i < NUM_ATTRIBUTES; i++) {
						if (modes[k] &
						    bit_attributes[i]) {
							tempmode |=
							    bit_attributes[i];
							if (--j == 0)
								break;
						}
					}
				}
				modes[k] = tempmode;
			}
		}
		newmode = modes[0];
		oldmode = modes[1];
	}

	if (newmode == oldmode)
		return (rc);

#ifdef DEBUG
	if (outf)
		fprintf(outf, "vidupdate oldmode=%o, newmode=%o\n",
		    oldmode, newmode);
#endif

	if (set_attributes) {
		(void) tputs(tparm(set_attributes,
			newmode & A_STANDOUT,
			newmode & A_UNDERLINE,
			newmode & A_REVERSE,
			newmode & A_BLINK,
			newmode & A_DIM,
			newmode & A_BOLD,
			newmode & A_INVIS,
			newmode & A_PROTECT,
			newmode & A_ALTCHARSET),
			1, outc);
		rc = -1;
	} else {
		chtype	turn_on, turn_off;
		int			i;

		/*
		 * If we are going to turn something on anyway and we are
		 * on a glitchy terminal, don't bother turning it off
		 * since by turning something on you turn everything else off.
		 */

		if ((ceol_standout_glitch || magic_cookie_glitch >= 0) &&
		    ((turn_on = ((oldmode ^ newmode) & newmode)) !=
		    A_NORMAL)) {
			goto turn_on_code;
	}

	if ((turn_off = (oldmode & newmode) ^ oldmode) != A_NORMAL) {
		/*
		 * Check for things to turn off.
		 * First see if we are going to turn off something
		 * that doesn't have a specific turn off capability.
		 *
		 * Then check to see if, even though there may be a specific
		 * turn off sequence, this terminal doesn't have one or
		 * the turn off sequence also turns off something else.
		 */
		if ((turn_off & ~(A_ALTCHARSET | A_STANDOUT | A_UNDERLINE)) ||
		    (turn_off != (turn_off & cur_term->check_turn_off))) {
			(void) tputs(tparm_p0(exit_attribute_mode), 1, outc);
			rc = -1;
			oldmode = A_NORMAL;
		} else {
			for (i = 0; i < NUM_OF_SPECIFIC_TURN_OFFS; i++) {
				if (turn_off & bit_attributes[i]) {
					(void) tputs(tparm_p0
					    (cur_term->turn_off_seq[i]),
					    1, outc);
					oldmode &= ~bit_attributes[i];
					rc = -1;
				}
			}
		}
	}

	if ((turn_on = ((oldmode ^ newmode) & newmode)) != A_NORMAL) {
turn_on_code:

		/* Check for modes to turn on. */

		for (i = 0; i < NUM_ATTRIBUTES; i++)
			if (turn_on & bit_attributes[i]) {
				(void) tputs(tparm_p0(cur_term->turn_on_seq[i]),
				    1, outc);
				rc = -1;
				/*
				 * Keep turning off the bit(s) that we just
				 * sent to the screen.  As soon as turn_on
				 * reaches A_NORMAL we don't have to turn
				 * anything else on and we can
				 * break out of the loop.
				 */
				if ((turn_on &= ~bit_attributes[i]) ==
				    A_NORMAL)
					break;
			}
		}

		if (magic_cookie_glitch > 0)
			(void) tputs(cursor_left, 1, outc);
	}
	cur_term->sgr_mode = newmode;
	return (rc);
}


void
_change_color(short newcolor, int (*outc)(char))
{
#ifndef PC6300PLUS
	{
	_Color_pair *ptp = cur_term->_pairs_tbl;
	/* pairs table pointer */
	_Color_pair *cur_pair = &cur_term->_cur_pair;

	/* MORE: we may have to change some stuff, depending on whether */
	/* HP terminals  will be changing the background, or not	*/

	if (newcolor == 0) {
		if (orig_pair)
			(void) tputs(tparm_p0(orig_pair), 1, outc);
		if (set_a_background || set_a_foreground ||
		    set_background || set_foreground) {
			cur_pair->background = -1;
			cur_pair->foreground = -1;
		}
		return;
	}

	/* if we are on HP type terminal, just send an escape sequence	*/
	/* to use desired color pair (we could have done some optimization: */
	/* check if both the foreground and background of newcolor match    */
	/* the ones of cur_term->_cur_pair.  but that will happen only when */
	/* two color pairs are defined exacly the same, and probably not    */
	/* worth the effort).						    */

	if (set_color_pair)
		(void) tputs(tparm_p1(set_color_pair, newcolor), 1, outc);

		/* on Tek model we can do some optimization.	*/

	else {
		if (ptp[newcolor].background != cur_pair->background) {
			if (set_a_background)
				(void) tputs(tparm_p1(set_a_background,
				    ptp[newcolor].background), 1, outc);
			else if (set_background)
				(void) tputs(tparm_p1(set_background,
				    Oldcolors[ptp[newcolor].background]),
				    1, outc);
			cur_pair->background = ptp[newcolor].background;
		}
		if (ptp[newcolor].foreground != cur_pair->foreground) {
			if (set_a_foreground)
				(void) tputs(tparm_p1(set_a_foreground,
				    ptp[newcolor].foreground), 1, outc);
			else if (set_foreground)
				(void) tputs(tparm_p1(set_foreground,
				    Oldcolors[ptp[newcolor].foreground]),
				    1, outc);
			cur_pair->foreground = ptp[newcolor].foreground;
		}
	}
	}
#else
	{
	/* the following code is for PC6300 PLUS: it uses BOLD terminfo  */
	/* entry for turning on colors, and SGR0 for turning them off.   */
	/* Every time a new color-pair is used, we are forced to do an   */
	/* ioctl read, and the send 'enter_bold_mode' escape sequence.   */
	/* This could be improved  by using   */
	/* DIM, UNDERLINE, and REVERSE in addition to BOLD		 */

	struct console con;
	_Color_pair *ptp = cur_term->_pairs_tbl;
	/* pairs table pointer */
	back = ptp[newcolor].background;
	fore = ptp[newcolor].foreground;

	(void) fflush(SP->term_file);
	ioctl(cur_term->Filedes, CONIOGETDATA, &con);
#define	BOLD	4
	con.l[con.page].colors[BOLD] =
	    ((back + back + (fore > 5)) * 8 + fore) & 0177;
	ioctl(cur_term->Filedes, CONIOSETDATA, &con);
	(void) tputs(enter_bold_mode, 1, outc);
	}
#endif
}