1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25# ident "%Z%%M% %I% %E% SMI" 26 27include ../Makefile.master 28 29# Note that libcurses installs commands along with its library. 30# This is a minor bug which probably should be fixed. 31# Note also that a few extra libraries are kept in cmd source. 32# 33# Certain libraries are linked with, hence depend on, other libraries. 34# 35# Although we have historically used .WAIT to express dependencies, it 36# reduces the amount of parallelism and thus lengthens the time it 37# takes to build the libraries. Thus, we now require that any new 38# libraries explicitly call out their dependencies. Eventually, all 39# the library dependencies will be called out explicitly. See 40# "Library interdependencies" near the end of this file. 41# 42# Aside from explicit dependencies (and legacy .WAITs), all libraries 43# are built in parallel. 44# 45.PARALLEL: 46 47# 48# The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, 49# but required due to the "dependencies" of using .WAIT to barrier the 50# parallel dmake builds. once 4631488 has been fixed, they can be 51# consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as 52# shown in HDRSUBDIRS 53# 54SUBDIRS= \ 55 common .WAIT \ 56 abi/apptrace .WAIT \ 57 ../cmd/abi/spectrans .WAIT \ 58 ../cmd/sgs/libconv \ 59 ../cmd/sgs/libdl .WAIT 60 61$(CLOSED_BUILD)SUBDIRS += \ 62 $(CLOSED)/lib/libc_i18n 63 64SUBDIRS += \ 65 libc .WAIT \ 66 libmapmalloc .WAIT \ 67 ../cmd/sgs/libelf .WAIT \ 68 libmd5 \ 69 librsm \ 70 libmp .WAIT \ 71 libcmd \ 72 libnsl \ 73 libsecdb .WAIT \ 74 librpcsvc \ 75 libsocket .WAIT \ 76 libsctp \ 77 libresolv \ 78 libresolv2 .WAIT \ 79 libw .WAIT \ 80 libintl .WAIT \ 81 ../cmd/sgs/librtld_db \ 82 libaio \ 83 librt \ 84 libadm \ 85 libctf \ 86 libdtrace \ 87 libdtrace_jni \ 88 libcurses \ 89 libgen \ 90 libgss \ 91 libpam \ 92 libuuid \ 93 libthread \ 94 libpthread .WAIT \ 95 libslp \ 96 libbsdmalloc \ 97 libdoor \ 98 libdevinfo \ 99 libdladm \ 100 libdlpi \ 101 libeti \ 102 libcrypt \ 103 libefi \ 104 libwanboot \ 105 libwanbootutil \ 106 libcryptoutil \ 107 libinetcfg \ 108 libinetutil \ 109 libipmp \ 110 libkstat \ 111 libkvm \ 112 liblaadm \ 113 liblm \ 114 libmacadm \ 115 libmalloc \ 116 libmtmalloc \ 117 libnls \ 118 libsmbios \ 119 libtecla \ 120 libumem \ 121 libnvpair .WAIT \ 122 libexacct \ 123 libplot \ 124 libldap4 \ 125 libsasl \ 126 libldap5 \ 127 libsldap .WAIT \ 128 libbsm \ 129 libsys \ 130 libsysevent \ 131 libnisdb \ 132 libpool \ 133 libproc \ 134 libproject \ 135 libsendfile \ 136 nametoaddr \ 137 ncad_addr \ 138 gss_mechs/mech_krb5 .WAIT \ 139 krb5 .WAIT 140$(CLOSED_BUILD)SUBDIRS += \ 141 $(CLOSED)/lib/smartcard 142SUBDIRS += \ 143 passwdutil \ 144 pam_modules \ 145 crypt_modules \ 146 libadt_jni \ 147 auditd_plugins \ 148 libvolmgt \ 149 libdevice \ 150 libdevid \ 151 libdhcpsvc \ 152 libc_db \ 153 libsec \ 154 libtnfprobe \ 155 libtnf \ 156 libtnfctl \ 157 libdhcpagent \ 158 libdhcpdu \ 159 libdhcputil \ 160 libipsecutil 161$(CLOSED_BUILD)SUBDIRS += \ 162 $(CLOSED)/lib/libike 163SUBDIRS += \ 164 nsswitch \ 165 print \ 166 libuutil \ 167 libscf \ 168 libinetsvc \ 169 librestart \ 170 libsched 171$(CLOSED_BUILD)SUBDIRS += \ 172 $(CLOSED)/lib/libelfsign 173SUBDIRS += \ 174 pkcs11 .WAIT \ 175 libpctx .WAIT \ 176 libcpc \ 177 watchmalloc \ 178 madv \ 179 mpss \ 180 libwrap \ 181 libxcurses \ 182 libxcurses2 \ 183 libxnet \ 184 libzonecfg \ 185 libzoneinfo \ 186 gss_mechs/mech_spnego \ 187 gss_mechs/mech_dummy \ 188 gss_mechs/mech_dh \ 189 rpcsec_gss \ 190 librcm .WAIT \ 191 libcfgadm .WAIT \ 192 libpicl .WAIT \ 193 libpicltree .WAIT \ 194 cfgadm_plugins \ 195 libmail \ 196 lvm \ 197 libsmedia \ 198 libipp \ 199 openssl \ 200 libdiskmgt \ 201 liblgrp \ 202 libfsmgt \ 203 fm \ 204 libavl \ 205 libcmdutils \ 206 libcontract \ 207 ../cmd/sendmail/libmilter \ 208 sasl_plugins \ 209 udapl \ 210 libzpool \ 211 libzfs \ 212 libzfs_jni \ 213 $($(MACH)_SUBDIRS) 214 215sparc_SUBDIRS= .WAIT \ 216 efcode \ 217 libc_psr .WAIT \ 218 libmd5_psr .WAIT 219$(CLOSED_BUILD)sparc_SUBDIRS += \ 220 $(CLOSED)/lib/libprtdiag .WAIT \ 221 $(CLOSED)/lib/libprtdiag_psr \ 222 $(CLOSED)/lib/librsc 223sparc_SUBDIRS += \ 224 libfruutils .WAIT \ 225 libfru \ 226 libwrsmconf \ 227 storage \ 228 wrsm \ 229 libpcp 230 231fm: libexacct 232 233# 234# Create a special version of $(SUBDIRS) with no .WAIT's, for use with the 235# clean and clobber targets (for more information, see those targets, below). 236# 237NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) 238 239DCSUBDIRS = \ 240 lvm 241 242MSGSUBDIRS= \ 243 abi \ 244 auditd_plugins \ 245 cfgadm_plugins \ 246 gss_mechs/mech_dh \ 247 gss_mechs/mech_krb5 \ 248 krb5 \ 249 libbsm \ 250 libc \ 251 libcfgadm \ 252 libcontract \ 253 libcurses \ 254 libdhcpsvc \ 255 libdhcputil \ 256 libgss \ 257 libinetcfg \ 258 libipmp \ 259 libnsl \ 260 libpam \ 261 libpicl \ 262 libpool \ 263 libscf \ 264 libsasl \ 265 libldap5 \ 266 libsecdb \ 267 libsldap \ 268 libslp \ 269 libsmedia \ 270 libuutil \ 271 libwanboot \ 272 libwanbootutil \ 273 libzonecfg \ 274 lvm \ 275 madv \ 276 mpss \ 277 pam_modules \ 278 rpcsec_gss 279$(CLOSED_BUILD)MSGSUBDIRS += \ 280 $(CLOSED)/lib/smartcard 281MSGSUBDIRS += \ 282 $($(MACH)_MSGSUBDIRS) 283 284sparc_MSGSUBDIRS= 285 286$(CLOSED_BUILD)sparc_MSGSUBDIRS += \ 287 $(CLOSED)/lib/libprtdiag \ 288 $(CLOSED)/lib/libprtdiag_psr 289 290HDRSUBDIRS= libaio \ 291 auditd_plugins \ 292 libbsm \ 293 libc \ 294 libcmdutils \ 295 libcontract \ 296 libcpc \ 297 libctf \ 298 libcurses \ 299 libcryptoutil \ 300 libdevice \ 301 libdevid \ 302 libdevinfo \ 303 libdiskmgt \ 304 libdladm \ 305 libdlpi \ 306 libdhcpagent \ 307 libdhcpsvc \ 308 libdhcputil \ 309 libdtrace \ 310 libdtrace_jni \ 311 libeti \ 312 libgen \ 313 libwanboot \ 314 libwanbootutil \ 315 libipsecutil \ 316 libinetcfg \ 317 libinetsvc \ 318 libinetutil \ 319 libipmp \ 320 libipp \ 321 libkstat \ 322 libkvm \ 323 liblaadm \ 324 libmacadm \ 325 libmail \ 326 libmtmalloc \ 327 libnvpair \ 328 libpam \ 329 libpctx \ 330 libpicl \ 331 libpicltree \ 332 libplot \ 333 libpool \ 334 libproc \ 335 librcm \ 336 libscf \ 337 libsmbios \ 338 librestart \ 339 librpcsvc \ 340 librsm \ 341 libsasl \ 342 libsec \ 343 libslp \ 344 libsmedia \ 345 libsysevent \ 346 libtecla \ 347 libtnf \ 348 libtnfctl \ 349 libtnfprobe \ 350 libvolmgt \ 351 libumem \ 352 libuutil \ 353 libwrap \ 354 libxcurses2 \ 355 libzfs \ 356 libzfs_jni \ 357 libzoneinfo \ 358 lvm \ 359 openssl \ 360 pkcs11 \ 361 passwdutil \ 362 ../cmd/sendmail/libmilter \ 363 fm \ 364 udapl \ 365 $($(MACH)_HDRSUBDIRS) 366 367$(CLOSED_BUILD)HDRSUBDIRS += \ 368 $(CLOSED)/lib/libc_i18n \ 369 $(CLOSED)/lib/libike \ 370 $(CLOSED)/lib/smartcard 371 372sparc_HDRSUBDIRS= \ 373 libwrsmconf 374 375all := TARGET= all 376check := TARGET= check 377clean := TARGET= clean 378clobber := TARGET= clobber 379install := TARGET= install 380install_h := TARGET= install_h 381lint := TARGET= lint 382_dc := TARGET= _dc 383_msg := TARGET= _msg 384 385.KEEP_STATE: 386 387# 388# For the all and install targets, we clearly must respect library 389# dependencies so that the libraries link correctly. However, for 390# the remaining targets (check, clean, clobber, install_h, lint, _dc 391# and _msg), libraries do not have any dependencies on one another 392# and thus respecting dependencies just slows down the build. 393# As such, for these rules, we use pattern replacement to explicitly 394# avoid triggering the dependency information. Note that for clean, 395# clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than 396# $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. 397# 398 399all: $(SUBDIRS) 400 401install: $(SUBDIRS) .WAIT install_extra 402 403# extra libraries kept in other source areas 404install_extra: 405 @cd ../cmd/sgs; pwd; $(MAKE) install_lib 406 @pwd 407 408clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) 409 410install_h check: $(HDRSUBDIRS:%=%-nodepend) 411 412_msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc 413 414_dc: $(DCSUBDIRS:%=%-nodepend) 415 416# dependencies for pam_modules (see below) 417$(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard 418 419# 420# Library interdependencies are called out explicitly here 421# 422auditd_plugins: libbsm libnsl libsecdb 423gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 424libadt_jni: libbsm 425$(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n 426libcmdutils: libavl 427libcontract: libnvpair 428libdevid: libdevinfo 429libdevinfo: libnvpair libsec 430libdhcpagent: libdhcputil libnsl libsocket 431libdhcpsvc: libinetutil 432libdhcputil: libinetutil 433libdladm: libdlpi libdevinfo 434libdtrace: libproc libgen libctf 435libdtrace_jni: libuutil libdtrace 436libefi: libuuid 437$(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \ 438 $(CLOSED)/lib/libike libcryptoutil pkcs11 439libinetcfg: libnsl libsocket libdevinfo 440libnsl: libmd5 libscf 441libmacadm: libdevinfo 442libuuid: libsocket 443libinetutil: libsocket 444libsecdb: libcmd libnsl 445librt: libaio libmd5 446libsasl: libgss libsocket pkcs11 libmd5 447sasl_plugins: pkcs11 libgss libsocket libsasl 448libsctp: libsocket 449libsocket: libnsl 450libldap5: libsasl libsocket libnsl libmd5 451libsldap: libldap5 452libpool: libnvpair libexacct 453libproject: libpool libproc libsecdb 454libwrap: libnsl libsocket 455libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ 456 libdhcputil openssl 457libwanbootutil: libnsl 458pam_modules: libproject passwdutil $(SMARTCARD) 459libscf: libuutil 460libinetsvc: libscf 461librestart: libuutil libscf 462../cmd/sgs/libdl: ../cmd/sgs/libconv 463../cmd/sgs/libelf: ../cmd/sgs/libconv 464pkcs11: libcryptoutil 465print: libldap5 466udapl/udapl_tavor: udapl/libdat 467libzfs: libdevinfo libdevid libgen libnvpair libuutil 468libzfs_jni: libdiskmgt libnvpair libzfs 469libzpool: libavl libumem libnvpair 470 471# 472# The reason this rule checks for the existence of the 473# Makefile is that some of the directories do not exist 474# in certain situations (e.g., exportable source builds, 475# OpenSolaris). 476# 477$(SUBDIRS) abi: FRC 478 @if [ -f $@/Makefile ]; then \ 479 cd $@; pwd; $(MAKE) $(TARGET); \ 480 else \ 481 true; \ 482 fi 483 484$(SUBDIRS:%=%-nodepend) abi-nodepend: 485 @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ 486 cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ 487 else \ 488 true; \ 489 fi 490 491FRC: 492