1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25# ident "%Z%%M% %I% %E% SMI" 26 27include ../Makefile.master 28 29# Note that libcurses installs commands along with its library. 30# This is a minor bug which probably should be fixed. 31# Note also that a few extra libraries are kept in cmd source. 32# 33# Certain libraries are linked with, hence depend on, other libraries. 34# 35# Although we have historically used .WAIT to express dependencies, it 36# reduces the amount of parallelism and thus lengthens the time it 37# takes to build the libraries. Thus, we now require that any new 38# libraries explicitly call out their dependencies. Eventually, all 39# the library dependencies will be called out explicitly. See 40# "Library interdependencies" near the end of this file. 41# 42# Aside from explicit dependencies (and legacy .WAITs), all libraries 43# are built in parallel. 44# 45.PARALLEL: 46 47# 48# The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, 49# but required due to the "dependencies" of using .WAIT to barrier the 50# parallel dmake builds. once 4631488 has been fixed, they can be 51# consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as 52# shown in HDRSUBDIRS 53# 54SUBDIRS= \ 55 common .WAIT \ 56 abi/apptrace .WAIT \ 57 ../cmd/abi/spectrans .WAIT \ 58 ../cmd/sgs/libconv \ 59 ../cmd/sgs/libdl .WAIT 60 61$(CLOSED_BUILD)SUBDIRS += \ 62 $(CLOSED)/lib/libc_i18n 63 64SUBDIRS += \ 65 libc .WAIT \ 66 libmapmalloc .WAIT \ 67 ../cmd/sgs/libelf .WAIT \ 68 libmd \ 69 libmd5 \ 70 librsm \ 71 libmp .WAIT \ 72 libcmd \ 73 libnsl \ 74 libsecdb .WAIT \ 75 librpcsvc \ 76 libsocket .WAIT \ 77 libsctp \ 78 libresolv \ 79 libresolv2 .WAIT \ 80 libw .WAIT \ 81 libintl .WAIT \ 82 ../cmd/sgs/librtld_db \ 83 libaio \ 84 librt \ 85 libadm \ 86 libctf \ 87 libdtrace \ 88 libdtrace_jni \ 89 libcurses \ 90 libgen \ 91 libgss \ 92 libpam \ 93 libuuid \ 94 libthread \ 95 libpthread .WAIT \ 96 libslp \ 97 libbsdmalloc \ 98 libdoor \ 99 libdevinfo \ 100 libdladm \ 101 libdlpi \ 102 libeti \ 103 libcrypt \ 104 libefi \ 105 libfstyp \ 106 libwanboot \ 107 libwanbootutil \ 108 libcryptoutil \ 109 libinetcfg \ 110 libinetutil \ 111 libipmp \ 112 libkstat \ 113 libkvm \ 114 liblaadm \ 115 liblm \ 116 libmacadm \ 117 libmalloc \ 118 libmtmalloc \ 119 libnls \ 120 libsmbios \ 121 libtecla \ 122 libumem \ 123 libnvpair .WAIT \ 124 libexacct \ 125 libplot \ 126 libldap4 \ 127 libsasl \ 128 libldap5 \ 129 libsldap .WAIT \ 130 libbsm \ 131 libsys \ 132 libsysevent \ 133 libnisdb \ 134 libpool \ 135 libproc \ 136 libproject \ 137 libsendfile \ 138 nametoaddr \ 139 ncad_addr \ 140 gss_mechs/mech_krb5 .WAIT \ 141 libkrb5 .WAIT \ 142 krb5 .WAIT 143$(CLOSED_BUILD)SUBDIRS += \ 144 $(CLOSED)/lib/smartcard 145SUBDIRS += \ 146 passwdutil \ 147 pam_modules \ 148 crypt_modules \ 149 libadt_jni \ 150 auditd_plugins \ 151 libvolmgt \ 152 libdevice \ 153 libdevid \ 154 libdhcpsvc \ 155 libc_db \ 156 libsec \ 157 libtnfprobe \ 158 libtnf \ 159 libtnfctl \ 160 libdhcpagent \ 161 libdhcpdu \ 162 libdhcputil \ 163 libipsecutil 164$(CLOSED_BUILD)SUBDIRS += \ 165 $(CLOSED)/lib/libike 166SUBDIRS += \ 167 nsswitch \ 168 print \ 169 libuutil \ 170 libscf \ 171 libinetsvc \ 172 librestart \ 173 libsched 174$(CLOSED_BUILD)SUBDIRS += \ 175 $(CLOSED)/lib/libelfsign 176SUBDIRS += \ 177 pkcs11 .WAIT \ 178 libpctx .WAIT \ 179 libcpc \ 180 watchmalloc \ 181 extendedFILE \ 182 madv \ 183 mpss \ 184 libdisasm \ 185 libwrap \ 186 libxcurses \ 187 libxcurses2 \ 188 libxnet \ 189 libzonecfg \ 190 libzoneinfo \ 191 libtsnet \ 192 libtsol \ 193 gss_mechs/mech_spnego \ 194 gss_mechs/mech_dummy \ 195 gss_mechs/mech_dh \ 196 rpcsec_gss \ 197 librcm .WAIT \ 198 libcfgadm .WAIT \ 199 libpicl .WAIT \ 200 libpicltree .WAIT \ 201 cfgadm_plugins \ 202 libmail \ 203 lvm \ 204 libsmedia \ 205 libipp \ 206 openssl \ 207 libdiskmgt \ 208 liblgrp \ 209 libfsmgt \ 210 fm \ 211 libavl \ 212 libcmdutils \ 213 libcontract \ 214 ../cmd/sendmail/libmilter \ 215 sasl_plugins \ 216 udapl \ 217 libzpool \ 218 libzfs \ 219 libzfs_jni \ 220 libmapid \ 221 $($(MACH)_SUBDIRS) 222 223sparc_SUBDIRS= .WAIT \ 224 efcode \ 225 libc_psr .WAIT \ 226 libdscp \ 227 libprtdiag .WAIT \ 228 libprtdiag_psr \ 229 librsc \ 230 libfruutils .WAIT \ 231 libfru \ 232 libwrsmconf \ 233 storage \ 234 wrsm \ 235 libpcp 236 237fm: libexacct 238 239# 240# Create a special version of $(SUBDIRS) with no .WAIT's, for use with the 241# clean and clobber targets (for more information, see those targets, below). 242# 243NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) 244 245DCSUBDIRS = \ 246 lvm 247 248MSGSUBDIRS= \ 249 abi \ 250 auditd_plugins \ 251 cfgadm_plugins \ 252 gss_mechs/mech_dh \ 253 gss_mechs/mech_krb5 \ 254 krb5 \ 255 libbsm \ 256 libc \ 257 libcfgadm \ 258 libcontract \ 259 libcurses \ 260 libdhcpsvc \ 261 libdhcputil \ 262 libgss \ 263 libinetcfg \ 264 libipmp \ 265 libnsl \ 266 libpam \ 267 libpicl \ 268 libpool \ 269 libscf \ 270 libsasl \ 271 libldap5 \ 272 libsecdb \ 273 libsldap \ 274 libslp \ 275 libsmedia \ 276 libtsol \ 277 libuutil \ 278 libwanboot \ 279 libwanbootutil \ 280 libzonecfg \ 281 lvm \ 282 madv \ 283 mpss \ 284 pam_modules \ 285 rpcsec_gss 286$(CLOSED_BUILD)MSGSUBDIRS += \ 287 $(CLOSED)/lib/smartcard 288MSGSUBDIRS += \ 289 $($(MACH)_MSGSUBDIRS) 290 291sparc_MSGSUBDIRS= \ 292 libprtdiag \ 293 libprtdiag_psr 294 295HDRSUBDIRS= libaio \ 296 auditd_plugins \ 297 libbsm \ 298 libc \ 299 libcmdutils \ 300 libcontract \ 301 libcpc \ 302 libctf \ 303 libcurses \ 304 libcryptoutil \ 305 libdevice \ 306 libdevid \ 307 libdevinfo \ 308 libdiskmgt \ 309 libdladm \ 310 libdlpi \ 311 libdhcpagent \ 312 libdhcpsvc \ 313 libdhcputil \ 314 libdisasm \ 315 libdtrace \ 316 libdtrace_jni \ 317 libeti \ 318 libfstyp \ 319 libgen \ 320 libwanboot \ 321 libwanbootutil \ 322 libipsecutil \ 323 libinetcfg \ 324 libinetsvc \ 325 libinetutil \ 326 libipmp \ 327 libipp \ 328 libkstat \ 329 libkvm \ 330 liblaadm \ 331 libmacadm \ 332 libmail \ 333 libmd \ 334 libmtmalloc \ 335 libnvpair \ 336 libnsl \ 337 libpam \ 338 libpctx \ 339 libpicl \ 340 libpicltree \ 341 libplot \ 342 libpool \ 343 libproc \ 344 librcm \ 345 libscf \ 346 libsmbios \ 347 librestart \ 348 librpcsvc \ 349 librsm \ 350 libsasl \ 351 libsec \ 352 libslp \ 353 libsmedia \ 354 libsysevent \ 355 libtecla \ 356 libtnf \ 357 libtnfctl \ 358 libtnfprobe \ 359 libtsnet \ 360 libtsol \ 361 libvolmgt \ 362 libumem \ 363 libuutil \ 364 libwrap \ 365 libxcurses2 \ 366 libzfs \ 367 libzfs_jni \ 368 libzoneinfo \ 369 lvm \ 370 openssl \ 371 pkcs11 \ 372 passwdutil \ 373 ../cmd/sendmail/libmilter \ 374 fm \ 375 udapl \ 376 libmapid \ 377 libkrb5 \ 378 $($(MACH)_HDRSUBDIRS) 379 380$(CLOSED_BUILD)HDRSUBDIRS += \ 381 $(CLOSED)/lib/libc_i18n \ 382 $(CLOSED)/lib/libike \ 383 $(CLOSED)/lib/smartcard 384 385sparc_HDRSUBDIRS= \ 386 libdscp \ 387 libwrsmconf 388 389all := TARGET= all 390check := TARGET= check 391clean := TARGET= clean 392clobber := TARGET= clobber 393install := TARGET= install 394install_h := TARGET= install_h 395lint := TARGET= lint 396_dc := TARGET= _dc 397_msg := TARGET= _msg 398 399.KEEP_STATE: 400 401# 402# For the all and install targets, we clearly must respect library 403# dependencies so that the libraries link correctly. However, for 404# the remaining targets (check, clean, clobber, install_h, lint, _dc 405# and _msg), libraries do not have any dependencies on one another 406# and thus respecting dependencies just slows down the build. 407# As such, for these rules, we use pattern replacement to explicitly 408# avoid triggering the dependency information. Note that for clean, 409# clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than 410# $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. 411# 412 413all: $(SUBDIRS) 414 415install: $(SUBDIRS) .WAIT install_extra 416 417# extra libraries kept in other source areas 418install_extra: 419 @cd ../cmd/sgs; pwd; $(MAKE) install_lib 420 @pwd 421 422clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) 423 424install_h check: $(HDRSUBDIRS:%=%-nodepend) 425 426_msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc 427 428_dc: $(DCSUBDIRS:%=%-nodepend) 429 430# dependencies for pam_modules (see below) 431$(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard 432 433# 434# Library interdependencies are called out explicitly here 435# 436auditd_plugins: libbsm libnsl libsecdb 437gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 438libadt_jni: libbsm 439$(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n 440libbsm: libtsol 441libcmdutils: libavl 442libcontract: libnvpair 443libdevid: libdevinfo 444libdevinfo: libnvpair libsec 445libdhcpagent: libdhcputil libnsl libsocket 446libdhcpsvc: libinetutil 447libdhcputil: libinetutil 448libdladm: libdlpi libdevinfo 449libdtrace: libproc libgen libctf 450libdtrace_jni: libuutil libdtrace 451libefi: libuuid 452libfstyp: libnvpair 453$(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \ 454 $(CLOSED)/lib/libike libcryptoutil pkcs11 455libinetcfg: libnsl libsocket libdevinfo 456libnsl: libmd5 libscf 457libmapid: libresolv libcmd 458libmacadm: libdevinfo 459libuuid: libsocket 460libinetutil: libsocket 461libsecdb: libcmd libnsl 462librt: libaio libmd 463libsasl: libgss libsocket pkcs11 libmd 464sasl_plugins: pkcs11 libgss libsocket libsasl 465libsctp: libsocket 466libsocket: libnsl 467libldap5: libsasl libsocket libnsl libmd 468libsldap: libldap5 libtsol 469libpool: libnvpair libexacct 470libproject: libpool libproc libsecdb 471libtsnet: libnsl libtsol libsecdb 472libwrap: libnsl libsocket 473libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ 474 libdhcputil openssl 475libwanbootutil: libnsl 476pam_modules: libproject passwdutil $(SMARTCARD) 477libscf: libuutil libmd 478libinetsvc: libscf 479librestart: libuutil libscf 480../cmd/sgs/libdl: ../cmd/sgs/libconv 481../cmd/sgs/libelf: ../cmd/sgs/libconv 482pkcs11: libcryptoutil 483print: libldap5 484udapl/udapl_tavor: udapl/libdat 485libzfs: libdevinfo libdevid libgen libnvpair libuutil 486libzfs_jni: libdiskmgt libnvpair libzfs 487libzpool: libavl libumem libnvpair 488libsec: libavl 489 490# 491# The reason this rule checks for the existence of the 492# Makefile is that some of the directories do not exist 493# in certain situations (e.g., exportable source builds, 494# OpenSolaris). 495# 496$(SUBDIRS) abi: FRC 497 @if [ -f $@/Makefile ]; then \ 498 cd $@; pwd; $(MAKE) $(TARGET); \ 499 else \ 500 true; \ 501 fi 502 503$(SUBDIRS:%=%-nodepend) abi-nodepend: 504 @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ 505 cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ 506 else \ 507 true; \ 508 fi 509 510FRC: 511