1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _REPCACHE_PROTOCOL_H 28 #define _REPCACHE_PROTOCOL_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 /* 33 * The Repository Cache Protocol 34 * ----------------------------- 35 * 36 * 1. Introduction 37 * --------------- 38 * This header file defines the private protocols between libscf(3lib) and 39 * svc.configd(1m). There are two separate protocols: 40 * 41 * 1. The 'global' protocol, accessible via an fattach(3C)ed door located 42 * at REPOSITORY_DOOR_NAME. 43 * 44 * 2. The 'client' protocol, accessible through a door created using the 45 * global protocol, which allows access to the repository. 46 * 47 * 1.1 Design restrictions 48 * ----------------------- 49 * A basic constraint of the door IPC mechanism is that there is no reliable 50 * delivery. In particular: 51 * 52 * 1. If libscf(3lib) recieves an EINTR from door_call(), it doesn't know 53 * whether or not the server recieved (and is processing) its request. 54 * 55 * 2. When svc.configd(1M) calls door_return(), the client may have already 56 * received an EINTR, aborting its door_call(). In this case, the 57 * returned values are dropped on the floor. 58 * 59 * The practical upshot of all of this is simple: 60 * 61 * Every individual protocol action must be idempotent. 62 * 63 * That is, a client must be able to retry any single request multiple times, 64 * and get the correct results. 65 * 66 * 1.2. Protocol shorthand 67 * ----------------------- 68 * We represent by "REQUEST(arg1, arg2) -> result, res1, [desc]" a request code 69 * of REP_PROTOCOL_REQUEST (or REPOSITORY_DOOR_REQUEST), which takes two 70 * additional arguments, arg1 and arg2, and returns a result code, res1, and 71 * a file descriptor desc. 72 * 73 * If an error occurs, the server will usually only send the result code. (a 74 * short return) 75 * 76 * Inside the protocol destription, <foo> indicates the type foo indicates. 77 * 78 * 2. The Global protocol 79 * ---------------------- 80 * Everything starting with "REPOSITORY_DOOR" or "repository_door" belongs 81 * to the global protocol. 82 * 83 * 2.1. Global requests 84 * -------------------- 85 * 86 * REQUEST_CONNECT(rdr_flags, ...) -> result, [new_door] 87 * Request a new Client door. rdr_flags determines attributes of the 88 * connection: 89 * 90 * FLAG_DEBUG 91 * Sets connection debugging flags to those in rdr_debug. 92 * 93 * The new door is returned with DOOR_RELEASE set, so if the client does 94 * not recieve the response, the new door will recieve an unref 95 * notification. This makes this request idempotent. 96 * 97 * 2.2. Global reponse codes 98 * ------------------------- 99 * GLXXX: This needs to be thought through. 100 * 101 * SUCCESS 102 * FAIL_BAD_REQUEST 103 * FAIL_VERSION_MISMATCH 104 * FAIL_BAD_FLAG 105 * FAIL_BAD_USER 106 * FAIL_NO_RESOURCES 107 * 108 * 3. The Client protocol 109 * ---------------------- 110 * Everything starting with "REP_PROTOCOL" or "rep_protocol" belongs to the 111 * client protocol. 112 * 113 * 3.1. Techniques used 114 * -------------------- 115 * 3.1.1. Client-controlled identifiers 116 * 117 * An idiom the protocol uses to lower the number of round trips is 118 * client-controlled identifiers. The basic idea is this: whenever a 119 * client wants to set up and use a piece of server state, he picks an 120 * integer *which he knows is not in use* to identify it. The server then 121 * maintains per-client, per-resource id->resource maps. This has a number 122 * of advantages: 123 * 124 * 1. Since the client allocates the identifiers, we don't need to do 125 * a round-trip just to allocate a number. 126 * 127 * 2. Since it is the client's job to make sure identifiers don't collide, 128 * idempotency for setup (destroy) are simple: If the identifier 129 * already exists (does not exist), we just return success. 130 * 131 * 3. Since the identifiers are per-client, the design automatically 132 * precludes clients being able to manipulate other client's state. 133 * 134 * 3.1.2 Sequence numbers 135 * 136 * A standard way of gaining idempotency is introducing sequence numbers. 137 * These are simply integers which get incremented at points in the protocol, 138 * and make sure the client and server are in sync. 139 * 140 * In this protocol, we use sequence numbers for requests (like ITER_READ) 141 * which are repeated, returning different data each time. Since requests 142 * can also be repeated due to unreliable dispatch, the client increments 143 * the sequence number after every successful request. This allows the server 144 * to differentiate the two cases. (note that this means that failing 145 * requests have no side effects and are repeatable) 146 * 147 * 3.2. Client abstractions 148 * ------------------------ 149 * 3.2.1 Entities 150 * 151 * An "entity" is a typed register which the client can manipulate. 152 * Entities are named in the protocol by client-controlled identifiers. 153 * They have a fixed type for their entire lifetime, and may be in one 154 * of two states: 155 * 156 * valid 157 * The entity has a valid value, and may be read from. This state 158 * is reached by a successful write to the entity by some protocol 159 * step. 160 * 161 * invalid 162 * The entity does not contain a valid value. There are a number 163 * of ways to reach this state: 164 * 165 * 1. The entity was just created. 166 * 2. The underlying object that this entity refers to was destroyed. 167 * 3. A protocol request which would have modified this entity 168 * failed. 169 * 170 * An entity is an element in the tree of repository data. Every entity 171 * (except for the most distant SCOPE) has exactly one parent. Entities 172 * can have multiple children of different types, restricted by its base 173 * type. 174 * 175 * The ENTITY_GET call is used to get the root of the tree (the most local 176 * scope) 177 * 178 * 3.2.2. The entity tree 179 * ---------------------- 180 * The structure of a scope is as follows: 181 * 182 * _______ 183 * | SCOPE | 184 * |_______| 185 * \ . 186 * \ . 187 * \_________ 188 * | SERVICE | 189 * |_________| 190 * /. \ . 191 * /. \ . 192 * ____/ \__________ 193 * | PG | | INSTANCE | 194 * |____| |__________| 195 * /. \ . 196 * /. \ . 197 * ____/ \__________ 198 * | PG | | SNAPSHOT | 199 * |____| |__________| 200 * \ . 201 * \ . 202 * \___________ 203 * | SNAPLEVEL | 204 * |___________| 205 * /. 206 * /. 207 * ____/ 208 * | PG | 209 * |____| 210 * 211 * Where the dots indicate an arbitrary number (including 0) of children. 212 * 213 * For a given scope, the next scope (in the sense of distance) is its 214 * TYPE_SCOPE parent. The furthest out scope has no parent. 215 * 216 * 3.2.2 Iterators 217 * 218 * GLXXX 219 * 220 * 3.3. Client requests 221 * -------------------- 222 * 223 * CLOSE() -> result 224 * Closes the connection, revoking the door. After this call completes, 225 * no further calls will succeed. 226 * 227 * ENTITY_SETUP(entity_id, type) -> result 228 * Sets up an entity, identified by entity_id, to identify a single 229 * <type>. <type> may not be TYPE_NONE. 230 * 231 * ENTITY_NAME(entity_id, name_type) -> result, name 232 * Returns the name of entity_id. name_type determines which type of 233 * name to get. 234 * 235 * ENTITY_PARENT_TYPE(entity_id) -> result, parent_type 236 * Retrieves the type of entity_id's parent 237 * 238 * ENTITY_GET_CHILD(entity_id, child_id, name) -> result 239 * Puts entity_id's child (of child_id's type) named 'name' into child_id. 240 * 241 * ENTITY_GET_PARENT(entity_id, out_id) -> result 242 * Puts entity_id's parent into out_id. 243 * 244 * ENTITY_GET(entity_id, number) -> result 245 * Makes entity_id point to a particular object. If any error 246 * occurs, dest_id will be invalid. 247 * 248 * ENTITY_UPDATE(entity_id, changeid) -> result 249 * Updates the entity to pick up any new changes. 250 * 251 * ENTITY_CREATE_CHILD(entity_id, type, name, child_id, changeid) -> result 252 * Attaches the object of type /type/ in child_id as the child of 253 * entity_id named 'name'. 254 * 255 * ENTITY_CREATE_PG(entity_id, name, type, flags, child_id, changeid) -> result 256 * Creates a property group child of entity_id named 'name', type 'type' 257 * and flags 'flags', and puts the resulting object in child_id. 258 * 259 * ENTITY_DELETE(entity_id, changeid) -> result 260 * Deletes the entity represented by entity_id. 261 * 262 * ENTITY_RESET(entity_id) -> result 263 * Resets the entity. 264 * 265 * ENTITY_TEARDOWN(entity_id) -> result 266 * Destroys the entity entity_id. 267 * 268 * ITER_SETUP(iter_id) -> result 269 * Sets up an iterator id. 270 * 271 * ITER_START(iter_id, entity_id, itertype, flags, pattern) -> result 272 * Sets up an iterator, identified by iter_id, which will iterate the 273 * <itertype> children of entity_id whose names match 'pattern', 274 * with the matching controlled by flags. Initializing an iterator 275 * counts as the first sequence number (1). 276 * 277 * ITER_READ(iter_id, sequence, entity_id) -> result 278 * Retrieves the next element of iterator iter_id. Sequence starts at 2, 279 * and is incremented by the client after each successful iteration. 280 * The result is written to entity_id, which must be of the same type 281 * as the iterator result. The iterator must not be iterating values. 282 * 283 * ITER_READ_VALUE(iter_id, sequence) -> result, type, value 284 * Retrieves the next value for iterator iter_id. Sequence starts at 2, 285 * and is incremented by the client after each successful iteration. 286 * The iterator must be iterating a property's values. 287 * 288 * ITER_RESET(iter_id) -> result 289 * Throws away any accumulated state. 290 * 291 * ITER_TEARDOWN(iter_id) -> result 292 * Destroys the iterator iter_id. 293 * 294 * NEXT_SNAPLEVEL(entity_src, entity_dst) -> result 295 * If entity_src is a snapshot, set entity_dst to the first snaplevel 296 * in it. If entity_src is a snaplevel, set entity_dst to the next 297 * snaplevel, or fail if there isn't one. 298 * 299 * SNAPSHOT_TAKE(entity_id, name, dest_id, flags) -> result 300 * Takes a snapshot of entity_id, creating snaplevels for the instance and 301 * its parent service. If flags is REP_SNAPSHOT_NEW, a new snapshot named 302 * 'name' is created as a child of entity_id, dest_id is pointed to it, 303 * and the new snaplevels are attached to it. If flags is 304 * REP_SNAPSHOT_ATTACH, name must be empty, and the new snaplevels are 305 * attached to the snapshot dest_id points to. 306 * 307 * SNAPSHOT_TAKE_NAMED(entity_id, instname, svcname, name, dest_id) -> result 308 * Like SNAPSHOT_TAKE, but always acts as if REP_SNAPSHOT_NEW is 309 * specified, and instname and svcname override the actual service and 310 * instance names, respectively, written into the snaplevels. 311 * 312 * Note that this is only useful for writing snapshots which will later 313 * be transferred to another instance (svc:/svcname:instname/) 314 * 315 * SNAPSHOT_ATTACH(source_id, dest_id) -> result 316 * The snaplevels attached to the snapshot referenced by source_id are 317 * attached to the snapshot dest_id is pointed at. 318 * 319 * PROPERTY_GET_TYPE(entity_id) -> result, value type 320 * Finds the value type of entity_id, which must be a property. 321 * 322 * PROPERTY_GET_VALUE(entity_id) -> result, type, value 323 * If the property contains a single value, returns it and its type. 324 * 325 * PROPERTYGRP_SETUP_WAIT(entity_id) -> result, [pipe fd] 326 * Sets up a notification for changes to the object entity_id currently 327 * references. On success, returns one side of a pipe -- when there 328 * has been a change (or the daemon dies), the other end of the pipe will 329 * be closed. 330 * 331 * Only one of these can be set up per client -- attempts to set up more 332 * than one will cause the previous one to get closed. 333 * 334 * PROPERTYGRP_TX_START(entity_id_tx, entity_id) -> result 335 * Makes entity_id_tx point to the same property group as entity_id, 336 * then attempts to set up entity_id_tx as a transaction on that group. 337 * entity_id and entity_id_tx must be distinct. On failure, entity_id_tx 338 * is reset. 339 * 340 * PROPERTYGRP_TX_COMMIT(entity_id, data) -> result 341 * Gives the actual steps to follow, and attempts to commit them. 342 * 343 * CLIENT_ADD_NOTIFY(type, pattern) -> result 344 * Adds a new property group name or type pattern to the notify list 345 * (see CLIENT_WAIT). If successful, takes effect immediately. 346 * 347 * CLIENT_WAIT(entity_id) -> result, fmri 348 * Waits for a change to a propertygroup that matches the patterns 349 * set up using CLIENT_ADD_NOTIFY, and puts the resultant propertygroup 350 * in entity_id. Note that if an error occurs, you can loose 351 * notifications. Either entity_id is set to a changed propertygroup, 352 * or fmri is a non-zero-length string identifying a deleted thing. 353 * 354 * BACKUP(name) -> result 355 * Backs up the persistant repository with a particular name. 356 * 357 * SET_ANNOTATION(operation, file) 358 * Set up a security audit annotation event. operation is the name of 359 * the operation that is being annotated, and file is the file being 360 * processed. This will be used to mark operations which comprise 361 * multiple primitive operations such as svccfg import. 362 */ 363 364 #include <door.h> 365 #include <stddef.h> 366 #include <sys/sysmacros.h> 367 368 #ifdef __cplusplus 369 extern "C" { 370 #endif 371 372 /* 373 * svc.configd initial protocol details 374 */ 375 #define REPOSITORY_DOOR_BASEVER (('R' << 24) | ('e' << 16) | ('p' << 8)) 376 #define REPOSITORY_DOOR_NAME "/etc/svc/volatile/repository_door" 377 #define REPOSITORY_DOOR_COOKIE ((void *)REPOSITORY_DOOR_BASEVER) 378 379 #define REPOSITORY_BOOT_BACKUP ((const char *)"boot") 380 381 /* 382 * This value should be incremented any time the protocol changes. When in 383 * doubt, bump it. 384 */ 385 #define REPOSITORY_DOOR_VERSION (20 + REPOSITORY_DOOR_BASEVER) 386 387 /* 388 * flags for rdr_flags 389 */ 390 #define REPOSITORY_DOOR_FLAG_DEBUG 0x00000001 /* rdr_debug */ 391 392 #define REPOSITORY_DOOR_FLAG_ALL 0x00000001 /* all flags */ 393 394 /* 395 * Request IDs 396 */ 397 enum repository_door_requestid { 398 REPOSITORY_DOOR_REQUEST_CONNECT = (('M' << 8) | 1) 399 }; 400 401 enum repository_door_statusid { 402 REPOSITORY_DOOR_SUCCESS = 0, 403 REPOSITORY_DOOR_FAIL_BAD_REQUEST = 1, 404 REPOSITORY_DOOR_FAIL_VERSION_MISMATCH = 2, 405 REPOSITORY_DOOR_FAIL_BAD_FLAG = 3, 406 REPOSITORY_DOOR_FAIL_NO_RESOURCES = 4, 407 REPOSITORY_DOOR_FAIL_PERMISSION_DENIED = 5 408 }; 409 410 /* 411 * You may only add elements to the end of this structure. 412 */ 413 typedef struct repository_door_request { 414 uint32_t rdr_version; /* must be first element */ 415 enum repository_door_requestid rdr_request; 416 uint32_t rdr_flags; 417 uint32_t rdr_debug; 418 } repository_door_request_t; 419 420 typedef struct repository_door_response { 421 enum repository_door_statusid rdr_status; 422 } repository_door_response_t; 423 424 /* 425 * Client interface. Used on doors returned by REQUEST_CONNECT 426 */ 427 428 #define REP_PROTOCOL_NAME_LEN 120 /* maximum name length */ 429 #define REP_PROTOCOL_VALUE_LEN 4096 /* maximum value length */ 430 431 #define REP_PROTOCOL_FMRI_LEN (6 * REP_PROTOCOL_NAME_LEN) 432 433 #define REP_PROTOCOL_BASE ('C' << 8) 434 435 /* 436 * Request codes 437 */ 438 enum rep_protocol_requestid { 439 REP_PROTOCOL_CLOSE = REP_PROTOCOL_BASE, 440 441 REP_PROTOCOL_ENTITY_SETUP, 442 REP_PROTOCOL_ENTITY_NAME, 443 REP_PROTOCOL_ENTITY_PARENT_TYPE, 444 REP_PROTOCOL_ENTITY_GET_CHILD, 445 REP_PROTOCOL_ENTITY_GET_PARENT, 446 REP_PROTOCOL_ENTITY_GET, 447 REP_PROTOCOL_ENTITY_UPDATE, 448 REP_PROTOCOL_ENTITY_CREATE_CHILD, 449 REP_PROTOCOL_ENTITY_CREATE_PG, 450 REP_PROTOCOL_ENTITY_DELETE, 451 REP_PROTOCOL_ENTITY_RESET, 452 REP_PROTOCOL_ENTITY_TEARDOWN, 453 454 REP_PROTOCOL_ITER_SETUP, 455 REP_PROTOCOL_ITER_START, 456 REP_PROTOCOL_ITER_READ, 457 REP_PROTOCOL_ITER_READ_VALUE, 458 REP_PROTOCOL_ITER_RESET, 459 REP_PROTOCOL_ITER_TEARDOWN, 460 461 REP_PROTOCOL_NEXT_SNAPLEVEL, 462 463 REP_PROTOCOL_SNAPSHOT_TAKE, 464 REP_PROTOCOL_SNAPSHOT_TAKE_NAMED, 465 REP_PROTOCOL_SNAPSHOT_ATTACH, 466 467 REP_PROTOCOL_PROPERTY_GET_TYPE, 468 REP_PROTOCOL_PROPERTY_GET_VALUE, 469 470 REP_PROTOCOL_PROPERTYGRP_SETUP_WAIT, 471 REP_PROTOCOL_PROPERTYGRP_TX_START, 472 REP_PROTOCOL_PROPERTYGRP_TX_COMMIT, 473 474 REP_PROTOCOL_CLIENT_ADD_NOTIFY, 475 REP_PROTOCOL_CLIENT_WAIT, 476 477 REP_PROTOCOL_BACKUP, 478 479 REP_PROTOCOL_SET_AUDIT_ANNOTATION, 480 481 REP_PROTOCOL_MAX_REQUEST 482 }; 483 484 /* 485 * Response codes. These are returned to the client, and the errors are 486 * translated into scf_error_t's by libscf (see proto_error()). 487 */ 488 typedef int32_t rep_protocol_responseid_t; 489 enum rep_protocol_responseid { 490 REP_PROTOCOL_SUCCESS = 0, 491 /* iterators: No more values. */ 492 REP_PROTOCOL_DONE = 1, 493 494 /* Request from client was malformed. */ 495 REP_PROTOCOL_FAIL_BAD_REQUEST = -1, 496 /* Prerequisite call has not been made. */ 497 REP_PROTOCOL_FAIL_MISORDERED = -2, 498 /* Register for ID has not been created. */ 499 REP_PROTOCOL_FAIL_UNKNOWN_ID = -3, 500 /* Out of memory or other resource. */ 501 REP_PROTOCOL_FAIL_NO_RESOURCES = -4, 502 /* Type argument is invalid. */ 503 REP_PROTOCOL_FAIL_INVALID_TYPE = -5, 504 /* Requested object does not exist. */ 505 REP_PROTOCOL_FAIL_NOT_FOUND = -6, 506 /* Register for given ID does not point to an object. */ 507 REP_PROTOCOL_FAIL_NOT_SET = -7, 508 509 /* Requested name is longer than supplied buffer. */ 510 REP_PROTOCOL_FAIL_TRUNCATED = -8, 511 /* Operation requires different type. */ 512 REP_PROTOCOL_FAIL_TYPE_MISMATCH = -9, 513 514 /* Changeable object has been changed since last update. */ 515 REP_PROTOCOL_FAIL_NOT_LATEST = -10, 516 /* Creation failed because object with given name exists. */ 517 REP_PROTOCOL_FAIL_EXISTS = -11, 518 /* Transaction is invalid. */ 519 REP_PROTOCOL_FAIL_BAD_TX = -12, 520 /* Operation is not applicable to indicated object. */ 521 REP_PROTOCOL_FAIL_NOT_APPLICABLE = -13, 522 /* Two IDs for operation were unexpectedly equal. */ 523 REP_PROTOCOL_FAIL_DUPLICATE_ID = -14, 524 525 /* Permission denied. */ 526 REP_PROTOCOL_FAIL_PERMISSION_DENIED = -15, 527 /* Backend does not exist or otherwise refused access. */ 528 REP_PROTOCOL_FAIL_BACKEND_ACCESS = -16, 529 /* Backend is read-only. */ 530 REP_PROTOCOL_FAIL_BACKEND_READONLY = -17, 531 532 /* Object has been deleted. */ 533 REP_PROTOCOL_FAIL_DELETED = -18, 534 535 REP_PROTOCOL_FAIL_UNKNOWN = -0xfd 536 }; 537 538 /* 539 * Types 540 */ 541 typedef enum rep_protocol_entity { 542 REP_PROTOCOL_ENTITY_NONE, 543 REP_PROTOCOL_ENTITY_SCOPE, 544 REP_PROTOCOL_ENTITY_SERVICE, 545 REP_PROTOCOL_ENTITY_INSTANCE, 546 REP_PROTOCOL_ENTITY_SNAPSHOT, 547 REP_PROTOCOL_ENTITY_SNAPLEVEL, 548 REP_PROTOCOL_ENTITY_PROPERTYGRP, 549 REP_PROTOCOL_ENTITY_CPROPERTYGRP, /* "composed" property group */ 550 REP_PROTOCOL_ENTITY_PROPERTY, 551 REP_PROTOCOL_ENTITY_VALUE, 552 553 REP_PROTOCOL_ENTITY_MAX 554 } rep_protocol_entity_t; 555 556 typedef enum rep_protocol_value_type { 557 REP_PROTOCOL_TYPE_INVALID = '\0', 558 REP_PROTOCOL_TYPE_BOOLEAN = 'b', 559 REP_PROTOCOL_TYPE_COUNT = 'c', 560 REP_PROTOCOL_TYPE_INTEGER = 'i', 561 REP_PROTOCOL_TYPE_TIME = 't', 562 REP_PROTOCOL_TYPE_STRING = 's', 563 REP_PROTOCOL_TYPE_OPAQUE = 'o', 564 565 REP_PROTOCOL_SUBTYPE_USTRING = REP_PROTOCOL_TYPE_STRING|('u' << 8), 566 REP_PROTOCOL_SUBTYPE_URI = REP_PROTOCOL_TYPE_STRING|('U' << 8), 567 REP_PROTOCOL_SUBTYPE_FMRI = REP_PROTOCOL_TYPE_STRING|('f' << 8), 568 569 REP_PROTOCOL_SUBTYPE_HOST = REP_PROTOCOL_TYPE_STRING|('h' << 8), 570 REP_PROTOCOL_SUBTYPE_HOSTNAME = REP_PROTOCOL_TYPE_STRING|('N' << 8), 571 REP_PROTOCOL_SUBTYPE_NETADDR_V4 = REP_PROTOCOL_TYPE_STRING|('4' << 8), 572 REP_PROTOCOL_SUBTYPE_NETADDR_V6 = REP_PROTOCOL_TYPE_STRING|('6' << 8) 573 } rep_protocol_value_type_t; 574 575 576 #define REP_PROTOCOL_BASE_TYPE(t) ((t) & 0x00ff) 577 #define REP_PROTOCOL_SUBTYPE(t) (((t) & 0xff00) >> 8) 578 579 /* 580 * Request structures 581 */ 582 typedef struct rep_protocol_request { 583 enum rep_protocol_requestid rpr_request; 584 } rep_protocol_request_t; 585 586 struct rep_protocol_iter_request { 587 enum rep_protocol_requestid rpr_request; 588 uint32_t rpr_iterid; 589 }; 590 591 struct rep_protocol_iter_start { 592 enum rep_protocol_requestid rpr_request; /* ITER_START */ 593 uint32_t rpr_iterid; 594 595 uint32_t rpr_entity; 596 uint32_t rpr_itertype; 597 uint32_t rpr_flags; 598 char rpr_pattern[REP_PROTOCOL_NAME_LEN]; 599 }; 600 #define RP_ITER_START_ALL 0x00000001 /* ignore pattern, match all */ 601 #define RP_ITER_START_EXACT 0x00000002 /* exact match with pattern */ 602 #define RP_ITER_START_PGTYPE 0x00000003 /* exact match pg type */ 603 #define RP_ITER_START_FILT_MASK 0x00000003 604 #define RP_ITER_START_COMPOSED 0x00000004 /* composed */ 605 606 struct rep_protocol_iter_read { 607 enum rep_protocol_requestid rpr_request; /* ITER_READ */ 608 uint32_t rpr_iterid; 609 uint32_t rpr_sequence; /* client increments upon success */ 610 uint32_t rpr_entityid; /* entity to write result to */ 611 }; 612 613 struct rep_protocol_iter_read_value { 614 enum rep_protocol_requestid rpr_request; /* ITER_READ_VALUE */ 615 uint32_t rpr_iterid; 616 uint32_t rpr_sequence; /* client increments upon success */ 617 }; 618 619 struct rep_protocol_entity_setup { 620 enum rep_protocol_requestid rpr_request; /* ENTITY_SETUP */ 621 uint32_t rpr_entityid; 622 uint32_t rpr_entitytype; 623 }; 624 625 struct rep_protocol_entity_name { 626 enum rep_protocol_requestid rpr_request; /* ENTITY_NAME */ 627 uint32_t rpr_entityid; 628 uint32_t rpr_answertype; 629 }; 630 #define RP_ENTITY_NAME_NAME 0 631 #define RP_ENTITY_NAME_PGTYPE 1 632 #define RP_ENTITY_NAME_PGFLAGS 2 633 #define RP_ENTITY_NAME_SNAPLEVEL_SCOPE 3 634 #define RP_ENTITY_NAME_SNAPLEVEL_SERVICE 4 635 #define RP_ENTITY_NAME_SNAPLEVEL_INSTANCE 5 636 #define RP_ENTITY_NAME_PGREADPROT 6 637 638 struct rep_protocol_entity_update { 639 enum rep_protocol_requestid rpr_request; /* ENTITY_UPDATE */ 640 uint32_t rpr_entityid; 641 uint32_t rpr_changeid; 642 }; 643 644 struct rep_protocol_entity_parent_type { 645 enum rep_protocol_requestid rpr_request; /* ENTITY_PARENT_TYPE */ 646 uint32_t rpr_entityid; 647 }; 648 649 struct rep_protocol_entity_parent { 650 enum rep_protocol_requestid rpr_request; /* ENTITY_GET_PARENT */ 651 uint32_t rpr_entityid; 652 uint32_t rpr_outid; 653 }; 654 655 struct rep_protocol_entity_get { 656 enum rep_protocol_requestid rpr_request; /* ENTITY_SET */ 657 uint32_t rpr_entityid; 658 uint32_t rpr_object; 659 }; 660 #define RP_ENTITY_GET_INVALIDATE 1 661 #define RP_ENTITY_GET_MOST_LOCAL_SCOPE 2 662 663 struct rep_protocol_entity_create_child { 664 enum rep_protocol_requestid rpr_request; /* ENTITY_CREATE_CHILD */ 665 uint32_t rpr_entityid; 666 uint32_t rpr_childtype; 667 uint32_t rpr_childid; 668 uint32_t rpr_changeid; 669 char rpr_name[REP_PROTOCOL_NAME_LEN]; 670 }; 671 672 struct rep_protocol_entity_create_pg { 673 enum rep_protocol_requestid rpr_request; /* ENTITY_CREATE_PG */ 674 uint32_t rpr_entityid; 675 uint32_t rpr_childtype; 676 uint32_t rpr_childid; 677 uint32_t rpr_changeid; 678 char rpr_name[REP_PROTOCOL_NAME_LEN]; 679 char rpr_type[REP_PROTOCOL_NAME_LEN]; 680 uint32_t rpr_flags; 681 }; 682 683 struct rep_protocol_entity_get_child { 684 enum rep_protocol_requestid rpr_request; /* ENTITY_GET_CHILD */ 685 uint32_t rpr_entityid; 686 uint32_t rpr_childid; 687 char rpr_name[REP_PROTOCOL_NAME_LEN]; 688 }; 689 690 struct rep_protocol_entity_delete { 691 enum rep_protocol_requestid rpr_request; /* ENTITY_DELETE_CHILD */ 692 uint32_t rpr_entityid; 693 uint32_t rpr_changeid; 694 }; 695 696 struct rep_protocol_entity_reset { 697 enum rep_protocol_requestid rpr_request; /* ENTITY_NAME */ 698 uint32_t rpr_entityid; 699 }; 700 701 struct rep_protocol_entity_request { 702 enum rep_protocol_requestid rpr_request; /* ENTITY_NAME */ 703 uint32_t rpr_entityid; 704 }; 705 706 struct rep_protocol_entity_teardown { 707 enum rep_protocol_requestid rpr_request; /* ENTITY_TEARDOWN */ 708 uint32_t rpr_entityid; 709 }; 710 711 struct rep_protocol_entity_pair { 712 enum rep_protocol_requestid rpr_request; /* NEXT_SNAPLEVEL */ 713 uint32_t rpr_entity_src; 714 uint32_t rpr_entity_dst; 715 }; 716 717 struct rep_protocol_transaction_start { 718 enum rep_protocol_requestid rpr_request; /* TX_SETUP */ 719 uint32_t rpr_entityid_tx; /* property group tx entity */ 720 uint32_t rpr_entityid; /* property group entity */ 721 }; 722 723 struct rep_protocol_transaction_commit { 724 enum rep_protocol_requestid rpr_request; /* TX_COMMIT */ 725 uint32_t rpr_entityid; 726 uint32_t rpr_size; /* size of entire structure */ 727 uint8_t rpr_cmd[1]; 728 }; 729 730 #define REP_PROTOCOL_TRANSACTION_COMMIT_SIZE(sz) \ 731 (offsetof(struct rep_protocol_transaction_commit, rpr_cmd[sz])) 732 733 #define REP_PROTOCOL_TRANSACTION_COMMIT_MIN_SIZE \ 734 REP_PROTOCOL_TRANSACTION_COMMIT_SIZE(0) 735 736 enum rep_protocol_transaction_action { 737 REP_PROTOCOL_TX_ENTRY_INVALID, /* N/A */ 738 REP_PROTOCOL_TX_ENTRY_NEW, /* new property */ 739 REP_PROTOCOL_TX_ENTRY_CLEAR, /* clear old property */ 740 REP_PROTOCOL_TX_ENTRY_REPLACE, /* change type of old property */ 741 REP_PROTOCOL_TX_ENTRY_DELETE /* delete property (no values) */ 742 }; 743 744 struct rep_protocol_transaction_cmd { 745 enum rep_protocol_transaction_action rptc_action; 746 uint32_t rptc_type; 747 uint32_t rptc_size; /* size of entire structure */ 748 uint32_t rptc_name_len; 749 uint8_t rptc_data[1]; 750 }; 751 752 #define REP_PROTOCOL_TRANSACTION_CMD_SIZE(sz) \ 753 (offsetof(struct rep_protocol_transaction_cmd, rptc_data[sz])) 754 755 #define REP_PROTOCOL_TRANSACTION_CMD_MIN_SIZE \ 756 REP_PROTOCOL_TRANSACTION_CMD_SIZE(0) 757 758 #define TX_SIZE(x) P2ROUNDUP((x), sizeof (uint32_t)) 759 760 struct rep_protocol_transaction_request { 761 enum rep_protocol_requestid rpr_request; /* SETUP, ABORT or TEARDOWN */ 762 uint32_t rpr_txid; 763 }; 764 765 struct rep_protocol_property_request { 766 enum rep_protocol_requestid rpr_request; 767 uint32_t rpr_entityid; 768 }; 769 770 struct rep_protocol_propertygrp_request { 771 enum rep_protocol_requestid rpr_request; 772 uint32_t rpr_entityid; 773 }; 774 775 struct rep_protocol_notify_request { 776 enum rep_protocol_requestid rpr_request; 777 uint32_t rpr_type; 778 char rpr_pattern[REP_PROTOCOL_NAME_LEN]; 779 }; 780 #define REP_PROTOCOL_NOTIFY_PGNAME 1 781 #define REP_PROTOCOL_NOTIFY_PGTYPE 2 782 783 struct rep_protocol_wait_request { 784 enum rep_protocol_requestid rpr_request; 785 uint32_t rpr_entityid; 786 }; 787 788 struct rep_protocol_snapshot_take { 789 enum rep_protocol_requestid rpr_request; /* SNAPSHOT_TAKE */ 790 uint32_t rpr_entityid_src; 791 uint32_t rpr_entityid_dest; 792 int rpr_flags; 793 char rpr_name[REP_PROTOCOL_NAME_LEN]; 794 }; 795 #define REP_SNAPSHOT_NEW 0x00000001 796 #define REP_SNAPSHOT_ATTACH 0x00000002 797 798 struct rep_protocol_snapshot_take_named { 799 enum rep_protocol_requestid rpr_request; /* SNAPSHOT_TAKE_NAMED */ 800 uint32_t rpr_entityid_src; 801 uint32_t rpr_entityid_dest; 802 char rpr_svcname[REP_PROTOCOL_NAME_LEN]; 803 char rpr_instname[REP_PROTOCOL_NAME_LEN]; 804 char rpr_name[REP_PROTOCOL_NAME_LEN]; 805 }; 806 807 struct rep_protocol_snapshot_attach { 808 enum rep_protocol_requestid rpr_request; /* SNAPSHOT_ATTACH */ 809 uint32_t rpr_entityid_src; 810 uint32_t rpr_entityid_dest; 811 }; 812 813 struct rep_protocol_backup_request { 814 enum rep_protocol_requestid rpr_request; /* BACKUP */ 815 uint32_t rpr_changeid; 816 char rpr_name[REP_PROTOCOL_NAME_LEN]; 817 }; 818 819 struct rep_protocol_annotation { 820 enum rep_protocol_requestid rpr_request; /* SET_ANNOTATION */ 821 char rpr_operation[REP_PROTOCOL_NAME_LEN]; 822 char rpr_file[MAXPATHLEN]; 823 }; 824 825 /* 826 * Response structures 827 */ 828 typedef struct rep_protocol_response { 829 rep_protocol_responseid_t rpr_response; 830 } rep_protocol_response_t; 831 832 struct rep_protocol_integer_response { 833 rep_protocol_responseid_t rpr_response; 834 uint32_t rpr_value; 835 }; 836 837 struct rep_protocol_name_response { /* response to ENTITY_NAME */ 838 rep_protocol_responseid_t rpr_response; 839 char rpr_name[REP_PROTOCOL_NAME_LEN]; 840 }; 841 842 struct rep_protocol_fmri_response { 843 rep_protocol_responseid_t rpr_response; 844 char rpr_fmri[REP_PROTOCOL_FMRI_LEN]; 845 }; 846 847 struct rep_protocol_value_response { 848 rep_protocol_responseid_t rpr_response; 849 rep_protocol_value_type_t rpr_type; 850 char rpr_value[2 * REP_PROTOCOL_VALUE_LEN + 1]; 851 }; 852 853 #ifdef __cplusplus 854 } 855 #endif 856 857 #endif /* _REPCACHE_PROTOCOL_H */ 858