1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22/* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27#pragma ident "%Z%%M% %I% %E% SMI" 28 29 .file "%M%" 30 31#include <sys/asm_linkage.h> 32 33/* 34 * ATOMIC_BO_ENABLE_SHIFT can be selectively defined by processors 35 * to enable exponential backoff. No definition means backoff is 36 * not desired i.e. backoff should be disabled. 37 * By default, the shift value is used to generate a power of 2 38 * value for backoff limit. In the kernel, processors scale this 39 * shift value with the number of online cpus. 40 */ 41 42#if defined(_KERNEL) 43 /* 44 * Legacy kernel interfaces; they will go away (eventually). 45 */ 46 ANSI_PRAGMA_WEAK2(cas8,atomic_cas_8,function) 47 ANSI_PRAGMA_WEAK2(cas32,atomic_cas_32,function) 48 ANSI_PRAGMA_WEAK2(cas64,atomic_cas_64,function) 49 ANSI_PRAGMA_WEAK2(caslong,atomic_cas_ulong,function) 50 ANSI_PRAGMA_WEAK2(casptr,atomic_cas_ptr,function) 51 ANSI_PRAGMA_WEAK2(atomic_and_long,atomic_and_ulong,function) 52 ANSI_PRAGMA_WEAK2(atomic_or_long,atomic_or_ulong,function) 53 ANSI_PRAGMA_WEAK2(swapl,atomic_swap_32,function) 54 55#ifdef ATOMIC_BO_ENABLE_SHIFT 56 57#if !defined(lint) 58 .weak cpu_atomic_delay 59 .type cpu_atomic_delay, #function 60#endif /* lint */ 61 62/* 63 * For the kernel, invoke processor specific delay routine to perform 64 * low-impact spin delay. The value of ATOMIC_BO_ENABLE_SHIFT is tuned 65 * with respect to the specific spin delay implementation. 66 */ 67#define DELAY_SPIN(label, tmp1, tmp2) \ 68 /* ; \ 69 * Define a pragma weak reference to a cpu specific ; \ 70 * delay routine for atomic backoff. For CPUs that ; \ 71 * have no such delay routine defined, the delay becomes ; \ 72 * just a simple tight loop. ; \ 73 * ; \ 74 * tmp1 = holds CPU specific delay routine ; \ 75 * tmp2 = holds atomic routine's callee return address ; \ 76 */ ; \ 77 sethi %hi(cpu_atomic_delay), tmp1 ; \ 78 or tmp1, %lo(cpu_atomic_delay), tmp1 ; \ 79label/**/0: ; \ 80 brz,pn tmp1, label/**/1 ; \ 81 mov %o7, tmp2 ; \ 82 jmpl tmp1, %o7 /* call CPU specific delay routine */ ; \ 83 nop /* delay slot : do nothing */ ; \ 84 mov tmp2, %o7 /* restore callee's return address */ ; \ 85label/**/1: 86 87/* 88 * For the kernel, we take into consideration of cas failures 89 * and also scale the backoff limit w.r.t. the number of cpus. 90 * For cas failures, we reset the backoff value to 1 if the cas 91 * failures exceed or equal to the number of online cpus. This 92 * will enforce some degree of fairness and prevent starvation. 93 * We also scale/normalize the processor provided specific 94 * ATOMIC_BO_ENABLE_SHIFT w.r.t. the number of online cpus to 95 * obtain the actual final limit to use. 96 */ 97#define ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label) \ 98 brnz,pt ncpu, label/**/0 ; \ 99 inc cas_cnt ; \ 100 sethi %hi(ncpus_online), ncpu ; \ 101 ld [ncpu + %lo(ncpus_online)], ncpu ; \ 102label/**/0: ; \ 103 cmp cas_cnt, ncpu ; \ 104 blu,pt %xcc, label/**/1 ; \ 105 sllx ncpu, ATOMIC_BO_ENABLE_SHIFT, limit ; \ 106 mov %g0, cas_cnt ; \ 107 mov 1, val ; \ 108label/**/1: 109#endif /* ATOMIC_BO_ENABLE_SHIFT */ 110 111#else /* _KERNEL */ 112 113/* 114 * ATOMIC_BO_ENABLE_SHIFT may be enabled/defined here for generic 115 * libc atomics. None for now. 116 */ 117#ifdef ATOMIC_BO_ENABLE_SHIFT 118#define DELAY_SPIN(label, tmp1, tmp2) \ 119label/**/0: 120 121#define ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label) \ 122 set 1 << ATOMIC_BO_ENABLE_SHIFT, limit 123#endif /* ATOMIC_BO_ENABLE_SHIFT */ 124#endif /* _KERNEL */ 125 126#ifdef ATOMIC_BO_ENABLE_SHIFT 127/* 128 * ATOMIC_BACKOFF_INIT macro for initialization. 129 * backoff val is initialized to 1. 130 * ncpu is initialized to 0 131 * The cas_cnt counts the cas instruction failure and is 132 * initialized to 0. 133 */ 134#define ATOMIC_BACKOFF_INIT(val, ncpu, cas_cnt) \ 135 mov 1, val ; \ 136 mov %g0, ncpu ; \ 137 mov %g0, cas_cnt 138 139#define ATOMIC_BACKOFF_BRANCH(cr, backoff, loop) \ 140 bne,a,pn cr, backoff 141 142/* 143 * Main ATOMIC_BACKOFF_BACKOFF macro for backoff. 144 */ 145#define ATOMIC_BACKOFF_BACKOFF(val, limit, ncpu, cas_cnt, label, retlabel) \ 146 ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label/**/_0) ; \ 147 cmp val, limit ; \ 148 blu,a,pt %xcc, label/**/_1 ; \ 149 mov val, limit ; \ 150label/**/_1: ; \ 151 mov limit, val ; \ 152 DELAY_SPIN(label/**/_2, %g2, %g3) ; \ 153 deccc limit ; \ 154 bgu,pn %xcc, label/**/_20 /* branch to middle of DELAY_SPIN */ ; \ 155 nop ; \ 156 ba retlabel ; \ 157 sllx val, 1, val 158#else /* ATOMIC_BO_ENABLE_SHIFT */ 159#define ATOMIC_BACKOFF_INIT(val, ncpu, cas_cnt) 160 161#define ATOMIC_BACKOFF_BRANCH(cr, backoff, loop) \ 162 bne,a,pn cr, loop 163 164#define ATOMIC_BACKOFF_BACKOFF(val, limit, ncpu, cas_cnt, label, retlabel) 165#endif /* ATOMIC_BO_ENABLE_SHIFT */ 166 167 /* 168 * NOTE: If atomic_inc_8 and atomic_inc_8_nv are ever 169 * separated, you need to also edit the libc sparcv9 platform 170 * specific mapfile and remove the NODYNSORT attribute 171 * from atomic_inc_8_nv. 172 */ 173 ENTRY(atomic_inc_8) 174 ALTENTRY(atomic_inc_8_nv) 175 ALTENTRY(atomic_inc_uchar) 176 ALTENTRY(atomic_inc_uchar_nv) 177 ba add_8 178 add %g0, 1, %o1 179 SET_SIZE(atomic_inc_uchar_nv) 180 SET_SIZE(atomic_inc_uchar) 181 SET_SIZE(atomic_inc_8_nv) 182 SET_SIZE(atomic_inc_8) 183 184 /* 185 * NOTE: If atomic_dec_8 and atomic_dec_8_nv are ever 186 * separated, you need to also edit the libc sparcv9 platform 187 * specific mapfile and remove the NODYNSORT attribute 188 * from atomic_dec_8_nv. 189 */ 190 ENTRY(atomic_dec_8) 191 ALTENTRY(atomic_dec_8_nv) 192 ALTENTRY(atomic_dec_uchar) 193 ALTENTRY(atomic_dec_uchar_nv) 194 ba add_8 195 sub %g0, 1, %o1 196 SET_SIZE(atomic_dec_uchar_nv) 197 SET_SIZE(atomic_dec_uchar) 198 SET_SIZE(atomic_dec_8_nv) 199 SET_SIZE(atomic_dec_8) 200 201 /* 202 * NOTE: If atomic_add_8 and atomic_add_8_nv are ever 203 * separated, you need to also edit the libc sparcv9 platform 204 * specific mapfile and remove the NODYNSORT attribute 205 * from atomic_add_8_nv. 206 */ 207 ENTRY(atomic_add_8) 208 ALTENTRY(atomic_add_8_nv) 209 ALTENTRY(atomic_add_char) 210 ALTENTRY(atomic_add_char_nv) 211add_8: 212 and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right 213 xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left 214 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 215 set 0xff, %o3 ! %o3 = mask 216 sll %o3, %g1, %o3 ! %o3 = shifted to bit offset 217 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 218 and %o1, %o3, %o1 ! %o1 = single byte value 219 andn %o0, 0x3, %o0 ! %o0 = word address 220 ld [%o0], %o2 ! read old value 2211: 222 add %o2, %o1, %o5 ! add value to the old value 223 and %o5, %o3, %o5 ! clear other bits 224 andn %o2, %o3, %o4 ! clear target bits 225 or %o4, %o5, %o5 ! insert the new value 226 cas [%o0], %o2, %o5 227 cmp %o2, %o5 228 bne,a,pn %icc, 1b 229 mov %o5, %o2 ! %o2 = old value 230 add %o2, %o1, %o5 231 and %o5, %o3, %o5 232 retl 233 srl %o5, %g1, %o0 ! %o0 = new value 234 SET_SIZE(atomic_add_char_nv) 235 SET_SIZE(atomic_add_char) 236 SET_SIZE(atomic_add_8_nv) 237 SET_SIZE(atomic_add_8) 238 239 /* 240 * NOTE: If atomic_inc_16 and atomic_inc_16_nv are ever 241 * separated, you need to also edit the libc sparcv9 platform 242 * specific mapfile and remove the NODYNSORT attribute 243 * from atomic_inc_16_nv. 244 */ 245 ENTRY(atomic_inc_16) 246 ALTENTRY(atomic_inc_16_nv) 247 ALTENTRY(atomic_inc_ushort) 248 ALTENTRY(atomic_inc_ushort_nv) 249 ba add_16 250 add %g0, 1, %o1 251 SET_SIZE(atomic_inc_ushort_nv) 252 SET_SIZE(atomic_inc_ushort) 253 SET_SIZE(atomic_inc_16_nv) 254 SET_SIZE(atomic_inc_16) 255 256 /* 257 * NOTE: If atomic_dec_16 and atomic_dec_16_nv are ever 258 * separated, you need to also edit the libc sparcv9 platform 259 * specific mapfile and remove the NODYNSORT attribute 260 * from atomic_dec_16_nv. 261 */ 262 ENTRY(atomic_dec_16) 263 ALTENTRY(atomic_dec_16_nv) 264 ALTENTRY(atomic_dec_ushort) 265 ALTENTRY(atomic_dec_ushort_nv) 266 ba add_16 267 sub %g0, 1, %o1 268 SET_SIZE(atomic_dec_ushort_nv) 269 SET_SIZE(atomic_dec_ushort) 270 SET_SIZE(atomic_dec_16_nv) 271 SET_SIZE(atomic_dec_16) 272 273 /* 274 * NOTE: If atomic_add_16 and atomic_add_16_nv are ever 275 * separated, you need to also edit the libc sparcv9 platform 276 * specific mapfile and remove the NODYNSORT attribute 277 * from atomic_add_16_nv. 278 */ 279 ENTRY(atomic_add_16) 280 ALTENTRY(atomic_add_16_nv) 281 ALTENTRY(atomic_add_short) 282 ALTENTRY(atomic_add_short_nv) 283add_16: 284 and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right 285 xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left 286 sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right 287 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 288 sethi %hi(0xffff0000), %o3 ! %o3 = mask 289 srl %o3, %o4, %o3 ! %o3 = shifted to bit offset 290 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 291 and %o1, %o3, %o1 ! %o1 = single short value 292 andn %o0, 0x2, %o0 ! %o0 = word address 293 ! if low-order bit is 1, we will properly get an alignment fault here 294 ld [%o0], %o2 ! read old value 2951: 296 add %o1, %o2, %o5 ! add value to the old value 297 and %o5, %o3, %o5 ! clear other bits 298 andn %o2, %o3, %o4 ! clear target bits 299 or %o4, %o5, %o5 ! insert the new value 300 cas [%o0], %o2, %o5 301 cmp %o2, %o5 302 bne,a,pn %icc, 1b 303 mov %o5, %o2 ! %o2 = old value 304 add %o1, %o2, %o5 305 and %o5, %o3, %o5 306 retl 307 srl %o5, %g1, %o0 ! %o0 = new value 308 SET_SIZE(atomic_add_short_nv) 309 SET_SIZE(atomic_add_short) 310 SET_SIZE(atomic_add_16_nv) 311 SET_SIZE(atomic_add_16) 312 313 /* 314 * NOTE: If atomic_inc_32 and atomic_inc_32_nv are ever 315 * separated, you need to also edit the libc sparcv9 platform 316 * specific mapfile and remove the NODYNSORT attribute 317 * from atomic_inc_32_nv. 318 */ 319 ENTRY(atomic_inc_32) 320 ALTENTRY(atomic_inc_32_nv) 321 ALTENTRY(atomic_inc_uint) 322 ALTENTRY(atomic_inc_uint_nv) 323 ba add_32 324 add %g0, 1, %o1 325 SET_SIZE(atomic_inc_uint_nv) 326 SET_SIZE(atomic_inc_uint) 327 SET_SIZE(atomic_inc_32_nv) 328 SET_SIZE(atomic_inc_32) 329 330 /* 331 * NOTE: If atomic_dec_32 and atomic_dec_32_nv are ever 332 * separated, you need to also edit the libc sparcv9 platform 333 * specific mapfile and remove the NODYNSORT attribute 334 * from atomic_dec_32_nv. 335 */ 336 ENTRY(atomic_dec_32) 337 ALTENTRY(atomic_dec_32_nv) 338 ALTENTRY(atomic_dec_uint) 339 ALTENTRY(atomic_dec_uint_nv) 340 ba add_32 341 sub %g0, 1, %o1 342 SET_SIZE(atomic_dec_uint_nv) 343 SET_SIZE(atomic_dec_uint) 344 SET_SIZE(atomic_dec_32_nv) 345 SET_SIZE(atomic_dec_32) 346 347 /* 348 * NOTE: If atomic_add_32 and atomic_add_32_nv are ever 349 * separated, you need to also edit the libc sparcv9 platform 350 * specific mapfile and remove the NODYNSORT attribute 351 * from atomic_add_32_nv. 352 */ 353 ENTRY(atomic_add_32) 354 ALTENTRY(atomic_add_32_nv) 355 ALTENTRY(atomic_add_int) 356 ALTENTRY(atomic_add_int_nv) 357add_32: 358 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 3590: 360 ld [%o0], %o2 3611: 362 add %o2, %o1, %o3 363 cas [%o0], %o2, %o3 364 cmp %o2, %o3 365 ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b) 366 mov %o3, %o2 367 retl 368 add %o2, %o1, %o0 ! return new value 3692: 370 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, add32, 0b) 371 SET_SIZE(atomic_add_int_nv) 372 SET_SIZE(atomic_add_int) 373 SET_SIZE(atomic_add_32_nv) 374 SET_SIZE(atomic_add_32) 375 376 /* 377 * NOTE: If atomic_inc_64 and atomic_inc_64_nv are ever 378 * separated, you need to also edit the libc sparcv9 platform 379 * specific mapfile and remove the NODYNSORT attribute 380 * from atomic_inc_64_nv. 381 */ 382 ENTRY(atomic_inc_64) 383 ALTENTRY(atomic_inc_64_nv) 384 ALTENTRY(atomic_inc_ulong) 385 ALTENTRY(atomic_inc_ulong_nv) 386 ba add_64 387 add %g0, 1, %o1 388 SET_SIZE(atomic_inc_ulong_nv) 389 SET_SIZE(atomic_inc_ulong) 390 SET_SIZE(atomic_inc_64_nv) 391 SET_SIZE(atomic_inc_64) 392 393 /* 394 * NOTE: If atomic_dec_64 and atomic_dec_64_nv are ever 395 * separated, you need to also edit the libc sparcv9 platform 396 * specific mapfile and remove the NODYNSORT attribute 397 * from atomic_dec_64_nv. 398 */ 399 ENTRY(atomic_dec_64) 400 ALTENTRY(atomic_dec_64_nv) 401 ALTENTRY(atomic_dec_ulong) 402 ALTENTRY(atomic_dec_ulong_nv) 403 ba add_64 404 sub %g0, 1, %o1 405 SET_SIZE(atomic_dec_ulong_nv) 406 SET_SIZE(atomic_dec_ulong) 407 SET_SIZE(atomic_dec_64_nv) 408 SET_SIZE(atomic_dec_64) 409 410 /* 411 * NOTE: If atomic_add_64 and atomic_add_64_nv are ever 412 * separated, you need to also edit the libc sparcv9 platform 413 * specific mapfile and remove the NODYNSORT attribute 414 * from atomic_add_64_nv. 415 */ 416 ENTRY(atomic_add_64) 417 ALTENTRY(atomic_add_64_nv) 418 ALTENTRY(atomic_add_ptr) 419 ALTENTRY(atomic_add_ptr_nv) 420 ALTENTRY(atomic_add_long) 421 ALTENTRY(atomic_add_long_nv) 422add_64: 423 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 4240: 425 ldx [%o0], %o2 4261: 427 add %o2, %o1, %o3 428 casx [%o0], %o2, %o3 429 cmp %o2, %o3 430 ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b) 431 mov %o3, %o2 432 retl 433 add %o2, %o1, %o0 ! return new value 4342: 435 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, add64, 0b) 436 SET_SIZE(atomic_add_long_nv) 437 SET_SIZE(atomic_add_long) 438 SET_SIZE(atomic_add_ptr_nv) 439 SET_SIZE(atomic_add_ptr) 440 SET_SIZE(atomic_add_64_nv) 441 SET_SIZE(atomic_add_64) 442 443 /* 444 * NOTE: If atomic_or_8 and atomic_or_8_nv are ever 445 * separated, you need to also edit the libc sparcv9 platform 446 * specific mapfile and remove the NODYNSORT attribute 447 * from atomic_or_8_nv. 448 */ 449 ENTRY(atomic_or_8) 450 ALTENTRY(atomic_or_8_nv) 451 ALTENTRY(atomic_or_uchar) 452 ALTENTRY(atomic_or_uchar_nv) 453 and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right 454 xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left 455 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 456 set 0xff, %o3 ! %o3 = mask 457 sll %o3, %g1, %o3 ! %o3 = shifted to bit offset 458 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 459 and %o1, %o3, %o1 ! %o1 = single byte value 460 andn %o0, 0x3, %o0 ! %o0 = word address 461 ld [%o0], %o2 ! read old value 4621: 463 or %o2, %o1, %o5 ! or in the new value 464 cas [%o0], %o2, %o5 465 cmp %o2, %o5 466 bne,a,pn %icc, 1b 467 mov %o5, %o2 ! %o2 = old value 468 or %o2, %o1, %o5 469 and %o5, %o3, %o5 470 retl 471 srl %o5, %g1, %o0 ! %o0 = new value 472 SET_SIZE(atomic_or_uchar_nv) 473 SET_SIZE(atomic_or_uchar) 474 SET_SIZE(atomic_or_8_nv) 475 SET_SIZE(atomic_or_8) 476 477 /* 478 * NOTE: If atomic_or_16 and atomic_or_16_nv are ever 479 * separated, you need to also edit the libc sparcv9 platform 480 * specific mapfile and remove the NODYNSORT attribute 481 * from atomic_or_16_nv. 482 */ 483 ENTRY(atomic_or_16) 484 ALTENTRY(atomic_or_16_nv) 485 ALTENTRY(atomic_or_ushort) 486 ALTENTRY(atomic_or_ushort_nv) 487 and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right 488 xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left 489 sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right 490 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 491 sethi %hi(0xffff0000), %o3 ! %o3 = mask 492 srl %o3, %o4, %o3 ! %o3 = shifted to bit offset 493 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 494 and %o1, %o3, %o1 ! %o1 = single short value 495 andn %o0, 0x2, %o0 ! %o0 = word address 496 ! if low-order bit is 1, we will properly get an alignment fault here 497 ld [%o0], %o2 ! read old value 4981: 499 or %o2, %o1, %o5 ! or in the new value 500 cas [%o0], %o2, %o5 501 cmp %o2, %o5 502 bne,a,pn %icc, 1b 503 mov %o5, %o2 ! %o2 = old value 504 or %o2, %o1, %o5 ! or in the new value 505 and %o5, %o3, %o5 506 retl 507 srl %o5, %g1, %o0 ! %o0 = new value 508 SET_SIZE(atomic_or_ushort_nv) 509 SET_SIZE(atomic_or_ushort) 510 SET_SIZE(atomic_or_16_nv) 511 SET_SIZE(atomic_or_16) 512 513 /* 514 * NOTE: If atomic_or_32 and atomic_or_32_nv are ever 515 * separated, you need to also edit the libc sparcv9 platform 516 * specific mapfile and remove the NODYNSORT attribute 517 * from atomic_or_32_nv. 518 */ 519 ENTRY(atomic_or_32) 520 ALTENTRY(atomic_or_32_nv) 521 ALTENTRY(atomic_or_uint) 522 ALTENTRY(atomic_or_uint_nv) 523 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 5240: 525 ld [%o0], %o2 5261: 527 or %o2, %o1, %o3 528 cas [%o0], %o2, %o3 529 cmp %o2, %o3 530 ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b) 531 mov %o3, %o2 532 retl 533 or %o2, %o1, %o0 ! return new value 5342: 535 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, or32, 0b) 536 SET_SIZE(atomic_or_uint_nv) 537 SET_SIZE(atomic_or_uint) 538 SET_SIZE(atomic_or_32_nv) 539 SET_SIZE(atomic_or_32) 540 541 /* 542 * NOTE: If atomic_or_64 and atomic_or_64_nv are ever 543 * separated, you need to also edit the libc sparcv9 platform 544 * specific mapfile and remove the NODYNSORT attribute 545 * from atomic_or_64_nv. 546 */ 547 ENTRY(atomic_or_64) 548 ALTENTRY(atomic_or_64_nv) 549 ALTENTRY(atomic_or_ulong) 550 ALTENTRY(atomic_or_ulong_nv) 551 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 5520: 553 ldx [%o0], %o2 5541: 555 or %o2, %o1, %o3 556 casx [%o0], %o2, %o3 557 cmp %o2, %o3 558 ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b) 559 mov %o3, %o2 560 retl 561 or %o2, %o1, %o0 ! return new value 5622: 563 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, or64, 0b) 564 SET_SIZE(atomic_or_ulong_nv) 565 SET_SIZE(atomic_or_ulong) 566 SET_SIZE(atomic_or_64_nv) 567 SET_SIZE(atomic_or_64) 568 569 /* 570 * NOTE: If atomic_and_8 and atomic_and_8_nv are ever 571 * separated, you need to also edit the libc sparcv9 platform 572 * specific mapfile and remove the NODYNSORT attribute 573 * from atomic_and_8_nv. 574 */ 575 ENTRY(atomic_and_8) 576 ALTENTRY(atomic_and_8_nv) 577 ALTENTRY(atomic_and_uchar) 578 ALTENTRY(atomic_and_uchar_nv) 579 and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right 580 xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left 581 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 582 set 0xff, %o3 ! %o3 = mask 583 sll %o3, %g1, %o3 ! %o3 = shifted to bit offset 584 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 585 orn %o1, %o3, %o1 ! all ones in other bytes 586 andn %o0, 0x3, %o0 ! %o0 = word address 587 ld [%o0], %o2 ! read old value 5881: 589 and %o2, %o1, %o5 ! and in the new value 590 cas [%o0], %o2, %o5 591 cmp %o2, %o5 592 bne,a,pn %icc, 1b 593 mov %o5, %o2 ! %o2 = old value 594 and %o2, %o1, %o5 595 and %o5, %o3, %o5 596 retl 597 srl %o5, %g1, %o0 ! %o0 = new value 598 SET_SIZE(atomic_and_uchar_nv) 599 SET_SIZE(atomic_and_uchar) 600 SET_SIZE(atomic_and_8_nv) 601 SET_SIZE(atomic_and_8) 602 603 /* 604 * NOTE: If atomic_and_16 and atomic_and_16_nv are ever 605 * separated, you need to also edit the libc sparcv9 platform 606 * specific mapfile and remove the NODYNSORT attribute 607 * from atomic_and_16_nv. 608 */ 609 ENTRY(atomic_and_16) 610 ALTENTRY(atomic_and_16_nv) 611 ALTENTRY(atomic_and_ushort) 612 ALTENTRY(atomic_and_ushort_nv) 613 and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right 614 xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left 615 sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right 616 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 617 sethi %hi(0xffff0000), %o3 ! %o3 = mask 618 srl %o3, %o4, %o3 ! %o3 = shifted to bit offset 619 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 620 orn %o1, %o3, %o1 ! all ones in the other half 621 andn %o0, 0x2, %o0 ! %o0 = word address 622 ! if low-order bit is 1, we will properly get an alignment fault here 623 ld [%o0], %o2 ! read old value 6241: 625 and %o2, %o1, %o5 ! and in the new value 626 cas [%o0], %o2, %o5 627 cmp %o2, %o5 628 bne,a,pn %icc, 1b 629 mov %o5, %o2 ! %o2 = old value 630 and %o2, %o1, %o5 631 and %o5, %o3, %o5 632 retl 633 srl %o5, %g1, %o0 ! %o0 = new value 634 SET_SIZE(atomic_and_ushort_nv) 635 SET_SIZE(atomic_and_ushort) 636 SET_SIZE(atomic_and_16_nv) 637 SET_SIZE(atomic_and_16) 638 639 /* 640 * NOTE: If atomic_and_32 and atomic_and_32_nv are ever 641 * separated, you need to also edit the libc sparcv9 platform 642 * specific mapfile and remove the NODYNSORT attribute 643 * from atomic_and_32_nv. 644 */ 645 ENTRY(atomic_and_32) 646 ALTENTRY(atomic_and_32_nv) 647 ALTENTRY(atomic_and_uint) 648 ALTENTRY(atomic_and_uint_nv) 649 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 6500: 651 ld [%o0], %o2 6521: 653 and %o2, %o1, %o3 654 cas [%o0], %o2, %o3 655 cmp %o2, %o3 656 ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b) 657 mov %o3, %o2 658 retl 659 and %o2, %o1, %o0 ! return new value 6602: 661 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, and32, 0b) 662 SET_SIZE(atomic_and_uint_nv) 663 SET_SIZE(atomic_and_uint) 664 SET_SIZE(atomic_and_32_nv) 665 SET_SIZE(atomic_and_32) 666 667 /* 668 * NOTE: If atomic_and_64 and atomic_and_64_nv are ever 669 * separated, you need to also edit the libc sparcv9 platform 670 * specific mapfile and remove the NODYNSORT attribute 671 * from atomic_and_64_nv. 672 */ 673 ENTRY(atomic_and_64) 674 ALTENTRY(atomic_and_64_nv) 675 ALTENTRY(atomic_and_ulong) 676 ALTENTRY(atomic_and_ulong_nv) 677 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 6780: 679 ldx [%o0], %o2 6801: 681 and %o2, %o1, %o3 682 casx [%o0], %o2, %o3 683 cmp %o2, %o3 684 ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b) 685 mov %o3, %o2 686 retl 687 and %o2, %o1, %o0 ! return new value 6882: 689 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, and64, 0b) 690 SET_SIZE(atomic_and_ulong_nv) 691 SET_SIZE(atomic_and_ulong) 692 SET_SIZE(atomic_and_64_nv) 693 SET_SIZE(atomic_and_64) 694 695 ENTRY(atomic_cas_8) 696 ALTENTRY(atomic_cas_uchar) 697 and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right 698 xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left 699 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 700 set 0xff, %o3 ! %o3 = mask 701 sll %o3, %g1, %o3 ! %o3 = shifted to bit offset 702 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 703 and %o1, %o3, %o1 ! %o1 = single byte value 704 sll %o2, %g1, %o2 ! %o2 = shifted to bit offset 705 and %o2, %o3, %o2 ! %o2 = single byte value 706 andn %o0, 0x3, %o0 ! %o0 = word address 707 ld [%o0], %o4 ! read old value 7081: 709 andn %o4, %o3, %o4 ! clear target bits 710 or %o4, %o2, %o5 ! insert the new value 711 or %o4, %o1, %o4 ! insert the comparison value 712 cas [%o0], %o4, %o5 713 cmp %o4, %o5 ! did we succeed? 714 be,pt %icc, 2f 715 and %o5, %o3, %o4 ! isolate the old value 716 cmp %o1, %o4 ! should we have succeeded? 717 be,a,pt %icc, 1b ! yes, try again 718 mov %o5, %o4 ! %o4 = old value 7192: 720 retl 721 srl %o4, %g1, %o0 ! %o0 = old value 722 SET_SIZE(atomic_cas_uchar) 723 SET_SIZE(atomic_cas_8) 724 725 ENTRY(atomic_cas_16) 726 ALTENTRY(atomic_cas_ushort) 727 and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right 728 xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left 729 sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right 730 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 731 sethi %hi(0xffff0000), %o3 ! %o3 = mask 732 srl %o3, %o4, %o3 ! %o3 = shifted to bit offset 733 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 734 and %o1, %o3, %o1 ! %o1 = single short value 735 sll %o2, %g1, %o2 ! %o2 = shifted to bit offset 736 and %o2, %o3, %o2 ! %o2 = single short value 737 andn %o0, 0x2, %o0 ! %o0 = word address 738 ! if low-order bit is 1, we will properly get an alignment fault here 739 ld [%o0], %o4 ! read old value 7401: 741 andn %o4, %o3, %o4 ! clear target bits 742 or %o4, %o2, %o5 ! insert the new value 743 or %o4, %o1, %o4 ! insert the comparison value 744 cas [%o0], %o4, %o5 745 cmp %o4, %o5 ! did we succeed? 746 be,pt %icc, 2f 747 and %o5, %o3, %o4 ! isolate the old value 748 cmp %o1, %o4 ! should we have succeeded? 749 be,a,pt %icc, 1b ! yes, try again 750 mov %o5, %o4 ! %o4 = old value 7512: 752 retl 753 srl %o4, %g1, %o0 ! %o0 = old value 754 SET_SIZE(atomic_cas_ushort) 755 SET_SIZE(atomic_cas_16) 756 757 ENTRY(atomic_cas_32) 758 ALTENTRY(atomic_cas_uint) 759 cas [%o0], %o1, %o2 760 retl 761 mov %o2, %o0 762 SET_SIZE(atomic_cas_uint) 763 SET_SIZE(atomic_cas_32) 764 765 ENTRY(atomic_cas_64) 766 ALTENTRY(atomic_cas_ptr) 767 ALTENTRY(atomic_cas_ulong) 768 casx [%o0], %o1, %o2 769 retl 770 mov %o2, %o0 771 SET_SIZE(atomic_cas_ulong) 772 SET_SIZE(atomic_cas_ptr) 773 SET_SIZE(atomic_cas_64) 774 775 ENTRY(atomic_swap_8) 776 ALTENTRY(atomic_swap_uchar) 777 and %o0, 0x3, %o4 ! %o4 = byte offset, left-to-right 778 xor %o4, 0x3, %g1 ! %g1 = byte offset, right-to-left 779 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 780 set 0xff, %o3 ! %o3 = mask 781 sll %o3, %g1, %o3 ! %o3 = shifted to bit offset 782 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 783 and %o1, %o3, %o1 ! %o1 = single byte value 784 andn %o0, 0x3, %o0 ! %o0 = word address 785 ld [%o0], %o2 ! read old value 7861: 787 andn %o2, %o3, %o5 ! clear target bits 788 or %o5, %o1, %o5 ! insert the new value 789 cas [%o0], %o2, %o5 790 cmp %o2, %o5 791 bne,a,pn %icc, 1b 792 mov %o5, %o2 ! %o2 = old value 793 and %o5, %o3, %o5 794 retl 795 srl %o5, %g1, %o0 ! %o0 = old value 796 SET_SIZE(atomic_swap_uchar) 797 SET_SIZE(atomic_swap_8) 798 799 ENTRY(atomic_swap_16) 800 ALTENTRY(atomic_swap_ushort) 801 and %o0, 0x2, %o4 ! %o4 = byte offset, left-to-right 802 xor %o4, 0x2, %g1 ! %g1 = byte offset, right-to-left 803 sll %o4, 3, %o4 ! %o4 = bit offset, left-to-right 804 sll %g1, 3, %g1 ! %g1 = bit offset, right-to-left 805 sethi %hi(0xffff0000), %o3 ! %o3 = mask 806 srl %o3, %o4, %o3 ! %o3 = shifted to bit offset 807 sll %o1, %g1, %o1 ! %o1 = shifted to bit offset 808 and %o1, %o3, %o1 ! %o1 = single short value 809 andn %o0, 0x2, %o0 ! %o0 = word address 810 ! if low-order bit is 1, we will properly get an alignment fault here 811 ld [%o0], %o2 ! read old value 8121: 813 andn %o2, %o3, %o5 ! clear target bits 814 or %o5, %o1, %o5 ! insert the new value 815 cas [%o0], %o2, %o5 816 cmp %o2, %o5 817 bne,a,pn %icc, 1b 818 mov %o5, %o2 ! %o2 = old value 819 and %o5, %o3, %o5 820 retl 821 srl %o5, %g1, %o0 ! %o0 = old value 822 SET_SIZE(atomic_swap_ushort) 823 SET_SIZE(atomic_swap_16) 824 825 ENTRY(atomic_swap_32) 826 ALTENTRY(atomic_swap_uint) 827 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 8280: 829 ld [%o0], %o2 8301: 831 mov %o1, %o3 832 cas [%o0], %o2, %o3 833 cmp %o2, %o3 834 ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b) 835 mov %o3, %o2 836 retl 837 mov %o3, %o0 8382: 839 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, swap32, 0b) 840 SET_SIZE(atomic_swap_uint) 841 SET_SIZE(atomic_swap_32) 842 843 ENTRY(atomic_swap_64) 844 ALTENTRY(atomic_swap_ptr) 845 ALTENTRY(atomic_swap_ulong) 846 ATOMIC_BACKOFF_INIT(%o4, %g4, %g5) 8470: 848 ldx [%o0], %o2 8491: 850 mov %o1, %o3 851 casx [%o0], %o2, %o3 852 cmp %o2, %o3 853 ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b) 854 mov %o3, %o2 855 retl 856 mov %o3, %o0 8572: 858 ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, swap64, 0b) 859 SET_SIZE(atomic_swap_ulong) 860 SET_SIZE(atomic_swap_ptr) 861 SET_SIZE(atomic_swap_64) 862 863 ENTRY(atomic_set_long_excl) 864 ATOMIC_BACKOFF_INIT(%o5, %g4, %g5) 865 mov 1, %o3 866 slln %o3, %o1, %o3 8670: 868 ldn [%o0], %o2 8691: 870 andcc %o2, %o3, %g0 ! test if the bit is set 871 bnz,a,pn %ncc, 2f ! if so, then fail out 872 mov -1, %o0 873 or %o2, %o3, %o4 ! set the bit, and try to commit it 874 casn [%o0], %o2, %o4 875 cmp %o2, %o4 876 ATOMIC_BACKOFF_BRANCH(%ncc, 5f, 1b) 877 mov %o4, %o2 878 mov %g0, %o0 8792: 880 retl 881 nop 8825: 883 ATOMIC_BACKOFF_BACKOFF(%o5, %g1, %g4, %g5, setlongexcl, 0b) 884 SET_SIZE(atomic_set_long_excl) 885 886 ENTRY(atomic_clear_long_excl) 887 ATOMIC_BACKOFF_INIT(%o5, %g4, %g5) 888 mov 1, %o3 889 slln %o3, %o1, %o3 8900: 891 ldn [%o0], %o2 8921: 893 andncc %o3, %o2, %g0 ! test if the bit is clear 894 bnz,a,pn %ncc, 2f ! if so, then fail out 895 mov -1, %o0 896 andn %o2, %o3, %o4 ! clear the bit, and try to commit it 897 casn [%o0], %o2, %o4 898 cmp %o2, %o4 899 ATOMIC_BACKOFF_BRANCH(%ncc, 5f, 1b) 900 mov %o4, %o2 901 mov %g0, %o0 9022: 903 retl 904 nop 9055: 906 ATOMIC_BACKOFF_BACKOFF(%o5, %g1, %g4, %g5, clrlongexcl, 0b) 907 SET_SIZE(atomic_clear_long_excl) 908 909#if !defined(_KERNEL) 910 911 /* 912 * Spitfires and Blackbirds have a problem with membars in the 913 * delay slot (SF_ERRATA_51). For safety's sake, we assume 914 * that the whole world needs the workaround. 915 */ 916 ENTRY(membar_enter) 917 membar #StoreLoad|#StoreStore 918 retl 919 nop 920 SET_SIZE(membar_enter) 921 922 ENTRY(membar_exit) 923 membar #LoadStore|#StoreStore 924 retl 925 nop 926 SET_SIZE(membar_exit) 927 928 ENTRY(membar_producer) 929 membar #StoreStore 930 retl 931 nop 932 SET_SIZE(membar_producer) 933 934 ENTRY(membar_consumer) 935 membar #LoadLoad 936 retl 937 nop 938 SET_SIZE(membar_consumer) 939 940#endif /* !_KERNEL */ 941