xref: /titanic_52/usr/src/common/atomic/sparcv9/atomic.s (revision 6ed9368a130d7c9a82e574da808d34034da33748)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

	.file	"atomic.s"

#include <sys/asm_linkage.h>

/*
 * ATOMIC_BO_ENABLE_SHIFT can be selectively defined by processors
 * to enable exponential backoff. No definition means backoff is
 * not desired i.e. backoff should be disabled.
 * By default, the shift value is used to generate a power of 2
 * value for backoff limit. In the kernel, processors scale this
 * shift value with the number of online cpus.
 */

#if defined(_KERNEL)
	/*
	 * Legacy kernel interfaces; they will go away the moment our closed
	 * bins no longer require them.
	 */
	ANSI_PRAGMA_WEAK2(cas8,atomic_cas_8,function)
	ANSI_PRAGMA_WEAK2(cas32,atomic_cas_32,function)
	ANSI_PRAGMA_WEAK2(cas64,atomic_cas_64,function)
	ANSI_PRAGMA_WEAK2(caslong,atomic_cas_ulong,function)
	ANSI_PRAGMA_WEAK2(casptr,atomic_cas_ptr,function)
	ANSI_PRAGMA_WEAK2(atomic_and_long,atomic_and_ulong,function)
	ANSI_PRAGMA_WEAK2(atomic_or_long,atomic_or_ulong,function)
	ANSI_PRAGMA_WEAK2(swapl,atomic_swap_32,function)

#ifdef ATOMIC_BO_ENABLE_SHIFT

#if !defined(lint)
	.weak   cpu_atomic_delay
	.type   cpu_atomic_delay, #function
#endif  /* lint */

/*
 * For the kernel, invoke processor specific delay routine to perform
 * low-impact spin delay. The value of ATOMIC_BO_ENABLE_SHIFT is tuned
 * with respect to the specific spin delay implementation.
 */
#define	DELAY_SPIN(label, tmp1, tmp2)					\
	/*								; \
	 * Define a pragma weak reference to a cpu specific		; \
	 * delay routine for atomic backoff. For CPUs that		; \
	 * have no such delay routine defined, the delay becomes	; \
	 * just a simple tight loop.					; \
	 *								; \
	 * tmp1 = holds CPU specific delay routine			; \
	 * tmp2 = holds atomic routine's callee return address		; \
	 */								; \
	sethi	%hi(cpu_atomic_delay), tmp1				; \
	or	tmp1, %lo(cpu_atomic_delay), tmp1			; \
label/**/0:								; \
	brz,pn	tmp1, label/**/1					; \
	mov	%o7, tmp2						; \
	jmpl	tmp1, %o7	/* call CPU specific delay routine */	; \
	  nop			/* delay slot : do nothing */		; \
	mov	tmp2, %o7	/* restore callee's return address */	; \
label/**/1:

/*
 * For the kernel, we take into consideration of cas failures
 * and also scale the backoff limit w.r.t. the number of cpus.
 * For cas failures, we reset the backoff value to 1 if the cas
 * failures exceed or equal to the number of online cpus. This
 * will enforce some degree of fairness and prevent starvation.
 * We also scale/normalize the processor provided specific
 * ATOMIC_BO_ENABLE_SHIFT w.r.t. the number of online cpus to
 * obtain the actual final limit to use.
 */
#define ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label)		\
	brnz,pt	ncpu, label/**/0					; \
	  inc	cas_cnt							; \
	sethi	%hi(ncpus_online), ncpu					; \
	ld	[ncpu + %lo(ncpus_online)], ncpu			; \
label/**/0:								; \
	cmp	cas_cnt, ncpu						; \
	blu,pt	%xcc, label/**/1					; \
	  sllx	ncpu, ATOMIC_BO_ENABLE_SHIFT, limit			; \
	mov	%g0, cas_cnt						; \
	mov	1, val							; \
label/**/1:
#endif	/* ATOMIC_BO_ENABLE_SHIFT */

#else	/* _KERNEL */

/*
 * ATOMIC_BO_ENABLE_SHIFT may be enabled/defined here for generic
 * libc atomics. None for now.
 */
#ifdef ATOMIC_BO_ENABLE_SHIFT
#define	DELAY_SPIN(label, tmp1, tmp2)	\
label/**/0:

#define ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label)  \
	set	1 << ATOMIC_BO_ENABLE_SHIFT, limit
#endif	/* ATOMIC_BO_ENABLE_SHIFT */
#endif	/* _KERNEL */

#ifdef ATOMIC_BO_ENABLE_SHIFT
/*
 * ATOMIC_BACKOFF_INIT macro for initialization.
 * backoff val is initialized to 1.
 * ncpu is initialized to 0
 * The cas_cnt counts the cas instruction failure and is
 * initialized to 0.
 */
#define ATOMIC_BACKOFF_INIT(val, ncpu, cas_cnt)	\
	mov	1, val				; \
	mov	%g0, ncpu			; \
	mov	%g0, cas_cnt

#define ATOMIC_BACKOFF_BRANCH(cr, backoff, loop) \
	bne,a,pn cr, backoff

/*
 * Main ATOMIC_BACKOFF_BACKOFF macro for backoff.
 */
#define ATOMIC_BACKOFF_BACKOFF(val, limit, ncpu, cas_cnt, label, retlabel) \
	ATOMIC_BACKOFF_CPU(val, limit, ncpu, cas_cnt, label/**/_0)	; \
	cmp	val, limit						; \
	blu,a,pt %xcc, label/**/_1					; \
	  mov	val, limit						; \
label/**/_1:								; \
	mov	limit, val						; \
	DELAY_SPIN(label/**/_2, %g2, %g3)				; \
	deccc	limit							; \
	bgu,pn	%xcc, label/**/_20 /* branch to middle of DELAY_SPIN */	; \
	  nop								; \
	ba	retlabel						; \
	sllx	val, 1, val

#else	/* ATOMIC_BO_ENABLE_SHIFT */
#define ATOMIC_BACKOFF_INIT(val, ncpu, cas_cnt)

#define ATOMIC_BACKOFF_BRANCH(cr, backoff, loop) \
	bne,a,pn cr, loop

#define ATOMIC_BACKOFF_BACKOFF(val, limit, ncpu, cas_cnt, label, retlabel)
#endif	/* ATOMIC_BO_ENABLE_SHIFT */

	/*
	 * NOTE: If atomic_inc_8 and atomic_inc_8_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_inc_8_nv.
	 */
	ENTRY(atomic_inc_8)
	ALTENTRY(atomic_inc_8_nv)
	ALTENTRY(atomic_inc_uchar)
	ALTENTRY(atomic_inc_uchar_nv)
	ba	add_8
	  add	%g0, 1, %o1
	SET_SIZE(atomic_inc_uchar_nv)
	SET_SIZE(atomic_inc_uchar)
	SET_SIZE(atomic_inc_8_nv)
	SET_SIZE(atomic_inc_8)

	/*
	 * NOTE: If atomic_dec_8 and atomic_dec_8_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_dec_8_nv.
	 */
	ENTRY(atomic_dec_8)
	ALTENTRY(atomic_dec_8_nv)
	ALTENTRY(atomic_dec_uchar)
	ALTENTRY(atomic_dec_uchar_nv)
	ba	add_8
	  sub	%g0, 1, %o1
	SET_SIZE(atomic_dec_uchar_nv)
	SET_SIZE(atomic_dec_uchar)
	SET_SIZE(atomic_dec_8_nv)
	SET_SIZE(atomic_dec_8)

	/*
	 * NOTE: If atomic_add_8 and atomic_add_8_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_add_8_nv.
	 */
	ENTRY(atomic_add_8)
	ALTENTRY(atomic_add_8_nv)
	ALTENTRY(atomic_add_char)
	ALTENTRY(atomic_add_char_nv)
add_8:
	and	%o0, 0x3, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x3, %g1		! %g1 = byte offset, right-to-left
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	set	0xff, %o3		! %o3 = mask
	sll	%o3, %g1, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single byte value
	andn	%o0, 0x3, %o0		! %o0 = word address
	ld	[%o0], %o2		! read old value
1:
	add	%o2, %o1, %o5		! add value to the old value
	and	%o5, %o3, %o5		! clear other bits
	andn	%o2, %o3, %o4		! clear target bits
	or	%o4, %o5, %o5		! insert the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	add	%o2, %o1, %o5
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_add_char_nv)
	SET_SIZE(atomic_add_char)
	SET_SIZE(atomic_add_8_nv)
	SET_SIZE(atomic_add_8)

	/*
	 * NOTE: If atomic_inc_16 and atomic_inc_16_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_inc_16_nv.
	 */
	ENTRY(atomic_inc_16)
	ALTENTRY(atomic_inc_16_nv)
	ALTENTRY(atomic_inc_ushort)
	ALTENTRY(atomic_inc_ushort_nv)
	ba	add_16
	  add	%g0, 1, %o1
	SET_SIZE(atomic_inc_ushort_nv)
	SET_SIZE(atomic_inc_ushort)
	SET_SIZE(atomic_inc_16_nv)
	SET_SIZE(atomic_inc_16)

	/*
	 * NOTE: If atomic_dec_16 and atomic_dec_16_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_dec_16_nv.
	 */
	ENTRY(atomic_dec_16)
	ALTENTRY(atomic_dec_16_nv)
	ALTENTRY(atomic_dec_ushort)
	ALTENTRY(atomic_dec_ushort_nv)
	ba	add_16
	  sub	%g0, 1, %o1
	SET_SIZE(atomic_dec_ushort_nv)
	SET_SIZE(atomic_dec_ushort)
	SET_SIZE(atomic_dec_16_nv)
	SET_SIZE(atomic_dec_16)

	/*
	 * NOTE: If atomic_add_16 and atomic_add_16_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_add_16_nv.
	 */
	ENTRY(atomic_add_16)
	ALTENTRY(atomic_add_16_nv)
	ALTENTRY(atomic_add_short)
	ALTENTRY(atomic_add_short_nv)
add_16:
	and	%o0, 0x2, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x2, %g1		! %g1 = byte offset, right-to-left
	sll	%o4, 3, %o4		! %o4 = bit offset, left-to-right
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	sethi	%hi(0xffff0000), %o3	! %o3 = mask
	srl	%o3, %o4, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single short value
	andn	%o0, 0x2, %o0		! %o0 = word address
	! if low-order bit is 1, we will properly get an alignment fault here
	ld	[%o0], %o2		! read old value
1:
	add	%o1, %o2, %o5		! add value to the old value
	and	%o5, %o3, %o5		! clear other bits
	andn	%o2, %o3, %o4		! clear target bits
	or	%o4, %o5, %o5		! insert the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	add	%o1, %o2, %o5
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_add_short_nv)
	SET_SIZE(atomic_add_short)
	SET_SIZE(atomic_add_16_nv)
	SET_SIZE(atomic_add_16)

	/*
	 * NOTE: If atomic_inc_32 and atomic_inc_32_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_inc_32_nv.
	 */
	ENTRY(atomic_inc_32)
	ALTENTRY(atomic_inc_32_nv)
	ALTENTRY(atomic_inc_uint)
	ALTENTRY(atomic_inc_uint_nv)
	ba	add_32
	  add	%g0, 1, %o1
	SET_SIZE(atomic_inc_uint_nv)
	SET_SIZE(atomic_inc_uint)
	SET_SIZE(atomic_inc_32_nv)
	SET_SIZE(atomic_inc_32)

	/*
	 * NOTE: If atomic_dec_32 and atomic_dec_32_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_dec_32_nv.
	 */
	ENTRY(atomic_dec_32)
	ALTENTRY(atomic_dec_32_nv)
	ALTENTRY(atomic_dec_uint)
	ALTENTRY(atomic_dec_uint_nv)
	ba	add_32
	  sub	%g0, 1, %o1
	SET_SIZE(atomic_dec_uint_nv)
	SET_SIZE(atomic_dec_uint)
	SET_SIZE(atomic_dec_32_nv)
	SET_SIZE(atomic_dec_32)

	/*
	 * NOTE: If atomic_add_32 and atomic_add_32_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_add_32_nv.
	 */
	ENTRY(atomic_add_32)
	ALTENTRY(atomic_add_32_nv)
	ALTENTRY(atomic_add_int)
	ALTENTRY(atomic_add_int_nv)
add_32:
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ld	[%o0], %o2
1:
	add	%o2, %o1, %o3
	cas	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b)
	  mov	%o3, %o2
	retl
	add	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, add32, 0b)
	SET_SIZE(atomic_add_int_nv)
	SET_SIZE(atomic_add_int)
	SET_SIZE(atomic_add_32_nv)
	SET_SIZE(atomic_add_32)

	/*
	 * NOTE: If atomic_inc_64 and atomic_inc_64_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_inc_64_nv.
	 */
	ENTRY(atomic_inc_64)
	ALTENTRY(atomic_inc_64_nv)
	ALTENTRY(atomic_inc_ulong)
	ALTENTRY(atomic_inc_ulong_nv)
	ba	add_64
	  add	%g0, 1, %o1
	SET_SIZE(atomic_inc_ulong_nv)
	SET_SIZE(atomic_inc_ulong)
	SET_SIZE(atomic_inc_64_nv)
	SET_SIZE(atomic_inc_64)

	/*
	 * NOTE: If atomic_dec_64 and atomic_dec_64_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_dec_64_nv.
	 */
	ENTRY(atomic_dec_64)
	ALTENTRY(atomic_dec_64_nv)
	ALTENTRY(atomic_dec_ulong)
	ALTENTRY(atomic_dec_ulong_nv)
	ba	add_64
	  sub	%g0, 1, %o1
	SET_SIZE(atomic_dec_ulong_nv)
	SET_SIZE(atomic_dec_ulong)
	SET_SIZE(atomic_dec_64_nv)
	SET_SIZE(atomic_dec_64)

	/*
	 * NOTE: If atomic_add_64 and atomic_add_64_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_add_64_nv.
	 */
	ENTRY(atomic_add_64)
	ALTENTRY(atomic_add_64_nv)
	ALTENTRY(atomic_add_ptr)
	ALTENTRY(atomic_add_ptr_nv)
	ALTENTRY(atomic_add_long)
	ALTENTRY(atomic_add_long_nv)
add_64:
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ldx	[%o0], %o2
1:
	add	%o2, %o1, %o3
	casx	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b)
	  mov	%o3, %o2
	retl
	add	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, add64, 0b)
	SET_SIZE(atomic_add_long_nv)
	SET_SIZE(atomic_add_long)
	SET_SIZE(atomic_add_ptr_nv)
	SET_SIZE(atomic_add_ptr)
	SET_SIZE(atomic_add_64_nv)
	SET_SIZE(atomic_add_64)

	/*
	 * NOTE: If atomic_or_8 and atomic_or_8_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_or_8_nv.
	 */
	ENTRY(atomic_or_8)
	ALTENTRY(atomic_or_8_nv)
	ALTENTRY(atomic_or_uchar)
	ALTENTRY(atomic_or_uchar_nv)
	and	%o0, 0x3, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x3, %g1		! %g1 = byte offset, right-to-left
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	set	0xff, %o3		! %o3 = mask
	sll	%o3, %g1, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single byte value
	andn	%o0, 0x3, %o0		! %o0 = word address
	ld	[%o0], %o2		! read old value
1:
	or	%o2, %o1, %o5		! or in the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	or	%o2, %o1, %o5
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_or_uchar_nv)
	SET_SIZE(atomic_or_uchar)
	SET_SIZE(atomic_or_8_nv)
	SET_SIZE(atomic_or_8)

	/*
	 * NOTE: If atomic_or_16 and atomic_or_16_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_or_16_nv.
	 */
	ENTRY(atomic_or_16)
	ALTENTRY(atomic_or_16_nv)
	ALTENTRY(atomic_or_ushort)
	ALTENTRY(atomic_or_ushort_nv)
	and	%o0, 0x2, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x2, %g1		! %g1 = byte offset, right-to-left
	sll	%o4, 3, %o4		! %o4 = bit offset, left-to-right
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	sethi	%hi(0xffff0000), %o3	! %o3 = mask
	srl	%o3, %o4, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single short value
	andn	%o0, 0x2, %o0		! %o0 = word address
	! if low-order bit is 1, we will properly get an alignment fault here
	ld	[%o0], %o2		! read old value
1:
	or	%o2, %o1, %o5		! or in the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	or	%o2, %o1, %o5		! or in the new value
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_or_ushort_nv)
	SET_SIZE(atomic_or_ushort)
	SET_SIZE(atomic_or_16_nv)
	SET_SIZE(atomic_or_16)

	/*
	 * NOTE: If atomic_or_32 and atomic_or_32_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_or_32_nv.
	 */
	ENTRY(atomic_or_32)
	ALTENTRY(atomic_or_32_nv)
	ALTENTRY(atomic_or_uint)
	ALTENTRY(atomic_or_uint_nv)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ld	[%o0], %o2
1:
	or	%o2, %o1, %o3
	cas	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b)
	  mov	%o3, %o2
	retl
	or	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, or32, 0b)
	SET_SIZE(atomic_or_uint_nv)
	SET_SIZE(atomic_or_uint)
	SET_SIZE(atomic_or_32_nv)
	SET_SIZE(atomic_or_32)

	/*
	 * NOTE: If atomic_or_64 and atomic_or_64_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_or_64_nv.
	 */
	ENTRY(atomic_or_64)
	ALTENTRY(atomic_or_64_nv)
	ALTENTRY(atomic_or_ulong)
	ALTENTRY(atomic_or_ulong_nv)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ldx	[%o0], %o2
1:
	or	%o2, %o1, %o3
	casx	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b)
	  mov	%o3, %o2
	retl
	or	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, or64, 0b)
	SET_SIZE(atomic_or_ulong_nv)
	SET_SIZE(atomic_or_ulong)
	SET_SIZE(atomic_or_64_nv)
	SET_SIZE(atomic_or_64)

	/*
	 * NOTE: If atomic_and_8 and atomic_and_8_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_and_8_nv.
	 */
	ENTRY(atomic_and_8)
	ALTENTRY(atomic_and_8_nv)
	ALTENTRY(atomic_and_uchar)
	ALTENTRY(atomic_and_uchar_nv)
	and	%o0, 0x3, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x3, %g1		! %g1 = byte offset, right-to-left
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	set	0xff, %o3		! %o3 = mask
	sll	%o3, %g1, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	orn	%o1, %o3, %o1		! all ones in other bytes
	andn	%o0, 0x3, %o0		! %o0 = word address
	ld	[%o0], %o2		! read old value
1:
	and	%o2, %o1, %o5		! and in the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	and	%o2, %o1, %o5
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_and_uchar_nv)
	SET_SIZE(atomic_and_uchar)
	SET_SIZE(atomic_and_8_nv)
	SET_SIZE(atomic_and_8)

	/*
	 * NOTE: If atomic_and_16 and atomic_and_16_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_and_16_nv.
	 */
	ENTRY(atomic_and_16)
	ALTENTRY(atomic_and_16_nv)
	ALTENTRY(atomic_and_ushort)
	ALTENTRY(atomic_and_ushort_nv)
	and	%o0, 0x2, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x2, %g1		! %g1 = byte offset, right-to-left
	sll	%o4, 3, %o4		! %o4 = bit offset, left-to-right
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	sethi	%hi(0xffff0000), %o3	! %o3 = mask
	srl	%o3, %o4, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	orn	%o1, %o3, %o1		! all ones in the other half
	andn	%o0, 0x2, %o0		! %o0 = word address
	! if low-order bit is 1, we will properly get an alignment fault here
	ld	[%o0], %o2		! read old value
1:
	and	%o2, %o1, %o5		! and in the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	and	%o2, %o1, %o5
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = new value
	SET_SIZE(atomic_and_ushort_nv)
	SET_SIZE(atomic_and_ushort)
	SET_SIZE(atomic_and_16_nv)
	SET_SIZE(atomic_and_16)

	/*
	 * NOTE: If atomic_and_32 and atomic_and_32_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_and_32_nv.
	 */
	ENTRY(atomic_and_32)
	ALTENTRY(atomic_and_32_nv)
	ALTENTRY(atomic_and_uint)
	ALTENTRY(atomic_and_uint_nv)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ld	[%o0], %o2
1:
	and	%o2, %o1, %o3
	cas	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b)
	  mov	%o3, %o2
	retl
	and	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, and32, 0b)
	SET_SIZE(atomic_and_uint_nv)
	SET_SIZE(atomic_and_uint)
	SET_SIZE(atomic_and_32_nv)
	SET_SIZE(atomic_and_32)

	/*
	 * NOTE: If atomic_and_64 and atomic_and_64_nv are ever
	 * separated, you need to also edit the libc sparcv9 platform
	 * specific mapfile and remove the NODYNSORT attribute
	 * from atomic_and_64_nv.
	 */
	ENTRY(atomic_and_64)
	ALTENTRY(atomic_and_64_nv)
	ALTENTRY(atomic_and_ulong)
	ALTENTRY(atomic_and_ulong_nv)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ldx	[%o0], %o2
1:
	and	%o2, %o1, %o3
	casx	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b)
	  mov	%o3, %o2
	retl
	and	%o2, %o1, %o0		! return new value
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, and64, 0b)
	SET_SIZE(atomic_and_ulong_nv)
	SET_SIZE(atomic_and_ulong)
	SET_SIZE(atomic_and_64_nv)
	SET_SIZE(atomic_and_64)

	ENTRY(atomic_cas_8)
	ALTENTRY(atomic_cas_uchar)
	and	%o0, 0x3, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x3, %g1		! %g1 = byte offset, right-to-left
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	set	0xff, %o3		! %o3 = mask
	sll	%o3, %g1, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single byte value
	sll	%o2, %g1, %o2		! %o2 = shifted to bit offset
	and	%o2, %o3, %o2		! %o2 = single byte value
	andn	%o0, 0x3, %o0		! %o0 = word address
	ld	[%o0], %o4		! read old value
1:
	andn	%o4, %o3, %o4		! clear target bits
	or	%o4, %o2, %o5		! insert the new value
	or	%o4, %o1, %o4		! insert the comparison value
	cas	[%o0], %o4, %o5
	cmp	%o4, %o5		! did we succeed?
	be,pt	%icc, 2f
	  and	%o5, %o3, %o4		! isolate the old value
	cmp	%o1, %o4		! should we have succeeded?
	be,a,pt	%icc, 1b		! yes, try again
	  mov	%o5, %o4		! %o4 = old value
2:
	retl
	srl	%o4, %g1, %o0		! %o0 = old value
	SET_SIZE(atomic_cas_uchar)
	SET_SIZE(atomic_cas_8)

	ENTRY(atomic_cas_16)
	ALTENTRY(atomic_cas_ushort)
	and	%o0, 0x2, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x2, %g1		! %g1 = byte offset, right-to-left
	sll	%o4, 3, %o4		! %o4 = bit offset, left-to-right
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	sethi	%hi(0xffff0000), %o3	! %o3 = mask
	srl	%o3, %o4, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single short value
	sll	%o2, %g1, %o2		! %o2 = shifted to bit offset
	and	%o2, %o3, %o2		! %o2 = single short value
	andn	%o0, 0x2, %o0		! %o0 = word address
	! if low-order bit is 1, we will properly get an alignment fault here
	ld	[%o0], %o4		! read old value
1:
	andn	%o4, %o3, %o4		! clear target bits
	or	%o4, %o2, %o5		! insert the new value
	or	%o4, %o1, %o4		! insert the comparison value
	cas	[%o0], %o4, %o5
	cmp	%o4, %o5		! did we succeed?
	be,pt	%icc, 2f
	  and	%o5, %o3, %o4		! isolate the old value
	cmp	%o1, %o4		! should we have succeeded?
	be,a,pt	%icc, 1b		! yes, try again
	  mov	%o5, %o4		! %o4 = old value
2:
	retl
	srl	%o4, %g1, %o0		! %o0 = old value
	SET_SIZE(atomic_cas_ushort)
	SET_SIZE(atomic_cas_16)

	ENTRY(atomic_cas_32)
	ALTENTRY(atomic_cas_uint)
	cas	[%o0], %o1, %o2
	retl
	mov	%o2, %o0
	SET_SIZE(atomic_cas_uint)
	SET_SIZE(atomic_cas_32)

	ENTRY(atomic_cas_64)
	ALTENTRY(atomic_cas_ptr)
	ALTENTRY(atomic_cas_ulong)
	casx	[%o0], %o1, %o2
	retl
	mov	%o2, %o0
	SET_SIZE(atomic_cas_ulong)
	SET_SIZE(atomic_cas_ptr)
	SET_SIZE(atomic_cas_64)

	ENTRY(atomic_swap_8)
	ALTENTRY(atomic_swap_uchar)
	and	%o0, 0x3, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x3, %g1		! %g1 = byte offset, right-to-left
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	set	0xff, %o3		! %o3 = mask
	sll	%o3, %g1, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single byte value
	andn	%o0, 0x3, %o0		! %o0 = word address
	ld	[%o0], %o2		! read old value
1:
	andn	%o2, %o3, %o5		! clear target bits
	or	%o5, %o1, %o5		! insert the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = old value
	SET_SIZE(atomic_swap_uchar)
	SET_SIZE(atomic_swap_8)

	ENTRY(atomic_swap_16)
	ALTENTRY(atomic_swap_ushort)
	and	%o0, 0x2, %o4		! %o4 = byte offset, left-to-right
	xor	%o4, 0x2, %g1		! %g1 = byte offset, right-to-left
	sll	%o4, 3, %o4		! %o4 = bit offset, left-to-right
	sll	%g1, 3, %g1		! %g1 = bit offset, right-to-left
	sethi	%hi(0xffff0000), %o3	! %o3 = mask
	srl	%o3, %o4, %o3		! %o3 = shifted to bit offset
	sll	%o1, %g1, %o1		! %o1 = shifted to bit offset
	and	%o1, %o3, %o1		! %o1 = single short value
	andn	%o0, 0x2, %o0		! %o0 = word address
	! if low-order bit is 1, we will properly get an alignment fault here
	ld	[%o0], %o2		! read old value
1:
	andn	%o2, %o3, %o5		! clear target bits
	or	%o5, %o1, %o5		! insert the new value
	cas	[%o0], %o2, %o5
	cmp	%o2, %o5
	bne,a,pn %icc, 1b
	  mov	%o5, %o2		! %o2 = old value
	and	%o5, %o3, %o5
	retl
	srl	%o5, %g1, %o0		! %o0 = old value
	SET_SIZE(atomic_swap_ushort)
	SET_SIZE(atomic_swap_16)

	ENTRY(atomic_swap_32)
	ALTENTRY(atomic_swap_uint)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ld	[%o0], %o2
1:
	mov	%o1, %o3
	cas	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%icc, 2f, 1b)
	  mov	%o3, %o2
	retl
	mov	%o3, %o0
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, swap32, 0b)
	SET_SIZE(atomic_swap_uint)
	SET_SIZE(atomic_swap_32)

	ENTRY(atomic_swap_64)
	ALTENTRY(atomic_swap_ptr)
	ALTENTRY(atomic_swap_ulong)
	ATOMIC_BACKOFF_INIT(%o4, %g4, %g5)
0:
	ldx	[%o0], %o2
1:
	mov	%o1, %o3
	casx	[%o0], %o2, %o3
	cmp	%o2, %o3
	ATOMIC_BACKOFF_BRANCH(%xcc, 2f, 1b)
	  mov	%o3, %o2
	retl
	mov	%o3, %o0
2:
	ATOMIC_BACKOFF_BACKOFF(%o4, %o5, %g4, %g5, swap64, 0b)
	SET_SIZE(atomic_swap_ulong)
	SET_SIZE(atomic_swap_ptr)
	SET_SIZE(atomic_swap_64)

	ENTRY(atomic_set_long_excl)
	ATOMIC_BACKOFF_INIT(%o5, %g4, %g5)
	mov	1, %o3
	slln	%o3, %o1, %o3
0:
	ldn	[%o0], %o2
1:
	andcc	%o2, %o3, %g0		! test if the bit is set
	bnz,a,pn %ncc, 2f		! if so, then fail out
	  mov	-1, %o0
	or	%o2, %o3, %o4		! set the bit, and try to commit it
	casn	[%o0], %o2, %o4
	cmp	%o2, %o4
	ATOMIC_BACKOFF_BRANCH(%ncc, 5f, 1b)
	  mov	%o4, %o2
	mov	%g0, %o0
2:
	retl
	nop
5:
	ATOMIC_BACKOFF_BACKOFF(%o5, %g1, %g4, %g5, setlongexcl, 0b)
	SET_SIZE(atomic_set_long_excl)

	ENTRY(atomic_clear_long_excl)
	ATOMIC_BACKOFF_INIT(%o5, %g4, %g5)
	mov	1, %o3
	slln	%o3, %o1, %o3
0:
	ldn	[%o0], %o2
1:
	andncc	%o3, %o2, %g0		! test if the bit is clear
	bnz,a,pn %ncc, 2f		! if so, then fail out
	  mov	-1, %o0
	andn	%o2, %o3, %o4		! clear the bit, and try to commit it
	casn	[%o0], %o2, %o4
	cmp	%o2, %o4
	ATOMIC_BACKOFF_BRANCH(%ncc, 5f, 1b)
	  mov	%o4, %o2
	mov	%g0, %o0
2:
	retl
	nop
5:
	ATOMIC_BACKOFF_BACKOFF(%o5, %g1, %g4, %g5, clrlongexcl, 0b)
	SET_SIZE(atomic_clear_long_excl)

#if !defined(_KERNEL)

	/*
	 * Spitfires and Blackbirds have a problem with membars in the
	 * delay slot (SF_ERRATA_51).  For safety's sake, we assume
	 * that the whole world needs the workaround.
	 */
	ENTRY(membar_enter)
	membar	#StoreLoad|#StoreStore
	retl
	nop
	SET_SIZE(membar_enter)

	ENTRY(membar_exit)
	membar	#LoadStore|#StoreStore
	retl
	nop
	SET_SIZE(membar_exit)

	ENTRY(membar_producer)
	membar	#StoreStore
	retl
	nop
	SET_SIZE(membar_producer)

	ENTRY(membar_consumer)
	membar	#LoadLoad
	retl
	nop
	SET_SIZE(membar_consumer)

#endif	/* !_KERNEL */