1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 #include <sys/types.h> 30 #include <sys/mman.h> 31 #include <sys/resource.h> 32 #include <sys/termios.h> 33 #include <sys/param.h> 34 #include <sys/salib.h> 35 36 #include <alloca.h> 37 #include <unistd.h> 38 #include <string.h> 39 #include <stdlib.h> 40 #include <fcntl.h> 41 #include <libctf.h> 42 #include <errno.h> 43 #include <ctype.h> 44 45 #include <kmdb/kmdb_promif.h> 46 #include <kmdb/kmdb_dpi.h> 47 #include <kmdb/kmdb_umemglue.h> 48 #include <kmdb/kmdb_io.h> 49 #include <kmdb/kmdb_dpi.h> 50 #include <kmdb/kmdb_wr.h> 51 #include <kmdb/kmdb_start.h> 52 #include <kmdb/kmdb_kdi.h> 53 #include <kmdb/kmdb_kvm.h> 54 #include <mdb/mdb_lex.h> 55 #include <mdb/mdb_debug.h> 56 #include <mdb/mdb_signal.h> 57 #include <mdb/mdb_string.h> 58 #include <mdb/mdb_modapi.h> 59 #include <mdb/mdb_target.h> 60 #include <mdb/mdb_gelf.h> 61 #include <mdb/mdb_conf.h> 62 #include <mdb/mdb_err.h> 63 #include <mdb/mdb_io_impl.h> 64 #include <mdb/mdb_frame.h> 65 #include <mdb/mdb_set.h> 66 #include <mdb/mdb.h> 67 68 #ifdef __sparc 69 #define KMDB_STACK_SIZE (384 * 1024) 70 #else 71 #define KMDB_STACK_SIZE (192 * 1024) 72 #endif 73 74 caddr_t kmdb_main_stack; 75 size_t kmdb_main_stack_size; 76 77 #define KMDB_DEF_IPATH "internal" 78 #if defined(_LP64) 79 #define KMDB_DEF_LPATH \ 80 "%r/platform/%p/kernel/kmdb/%i:" \ 81 "%r/platform/%m/kernel/kmdb/%i:" \ 82 "%r/kernel/kmdb/%i" 83 #else 84 #define KMDB_DEF_LPATH \ 85 "%r/platform/%m/kernel/kmdb:" \ 86 "%r/kernel/kmdb" 87 #endif 88 89 #define MDB_DEF_PROMPT "[%<_cpuid>]> " 90 91 #define KMDB_DEF_TERM_TYPE "vt100" 92 93 /* 94 * Similar to the panic_* variables in the kernel, we keep some relevant 95 * information stored in a set of global _mdb_abort_* variables; in the 96 * event that the debugger dumps core, these will aid core dump analysis. 97 */ 98 const char *volatile _mdb_abort_str; /* reason for failure */ 99 100 /* 101 * The kernel supplies a space-delimited list of directories 102 * (/platform/sun4u/kernel /kernel /usr/kernel ...) which we must transform into 103 * a debugger-friendly, colon-delimited module search path. We add the kmdb 104 * module directory to each component and change the delimiter. 105 */ 106 static char * 107 kmdb_modpath2lpath(const char *modpath) 108 { 109 #ifdef _LP64 110 static const char suffix[] = "/kmdb/%i:"; 111 #else 112 static const char suffix[] = "/kmdb:"; 113 #endif 114 const char *c; 115 char *lpath, *lpend, *nlpath; 116 size_t lpsz, lpres; 117 118 if (strchr(modpath, ':') != NULL) { 119 warn("invalid kernel module path\n"); 120 return (NULL); 121 } 122 123 lpres = lpsz = strlen(modpath) + MAXPATHLEN; 124 lpend = lpath = mdb_zalloc(lpsz, UM_SLEEP); 125 126 while (isspace(*modpath)) 127 modpath++; 128 129 for (; *modpath != '\0'; modpath = c) { 130 size_t sz; 131 132 for (c = modpath; !isspace(*c) && *c != '\0'; c++) 133 continue; 134 135 sz = (c - modpath) + sizeof (suffix) - 1; 136 if (sz >= lpres) 137 continue; 138 139 (void) strncpy(lpend, modpath, c - modpath); 140 (void) strcpy(lpend + (c - modpath), suffix); 141 142 lpend += sz; 143 lpres -= sz; 144 145 while (isspace(*c)) 146 c++; 147 } 148 149 if (lpend != lpath) 150 lpend[-1] = '\0'; /* eat trailing colon */ 151 152 nlpath = strdup(lpath); 153 mdb_free(lpath, lpsz); 154 return (nlpath); 155 } 156 157 /* 158 * called while the kernel is running 159 */ 160 int 161 kmdb_init(const char *execname, kmdb_auxv_t *kav) 162 { 163 mdb_io_t *in_io, *out_io, *err_io, *null_io; 164 mdb_tgt_ctor_f *tgt_ctor = kmdb_kvm_create; 165 mdb_tgt_t *tgt; 166 int i; 167 168 /* 169 * The beginnings of debugger initialization are a bit of a dance, due 170 * to interlocking dependencies between kmdb_prom_init, 171 * mdb_umem_startup, and mdb_create. In particular, allocator 172 * initialization can't begin until prom_init() is called, 173 * kmdb_prom_init can't finish until the allocator is ready and 174 * mdb_create has been called. We therefore split kmdb_prom_init into 175 * two pieces, and call thembefore and after umem initialization and 176 * mdb_create. 177 */ 178 kmdb_prom_init_begin("kmdb", kav); 179 mdb_umem_startup(kav->kav_dseg, kav->kav_dseg_size, 180 kav->kav_pagesize); 181 mdb_create(execname, "kmdb"); 182 kmdb_prom_init_finish(kav); 183 184 mdb.m_dseg = kav->kav_dseg; 185 mdb.m_dsegsz = kav->kav_dseg_size; 186 187 out_io = kmdb_promio_create("stdout"); 188 mdb.m_out = mdb_iob_create(out_io, MDB_IOB_WRONLY); 189 190 err_io = kmdb_promio_create("stderr"); 191 mdb.m_err = mdb_iob_create(err_io, MDB_IOB_WRONLY); 192 mdb_iob_clrflags(mdb.m_err, MDB_IOB_AUTOWRAP); 193 194 null_io = mdb_nullio_create(); 195 mdb.m_null = mdb_iob_create(null_io, MDB_IOB_WRONLY); 196 197 in_io = kmdb_promio_create("stdin"); 198 mdb.m_term = NULL; 199 200 if (kav->kav_config != NULL) 201 mdb_set_config(kav->kav_config); 202 203 if (kav->kav_argv != NULL) { 204 for (i = 0; kav->kav_argv[i] != NULL; i++) { 205 if (!mdb_set_options(kav->kav_argv[i], TRUE)) 206 return (-1); 207 } 208 } 209 210 if (kav->kav_flags & KMDB_AUXV_FL_NOUNLOAD) 211 mdb.m_flags |= MDB_FL_NOUNLOAD; 212 213 mdb.m_in = mdb_iob_create(in_io, MDB_IOB_RDONLY); 214 mdb_iob_setflags(mdb.m_in, MDB_IOB_TTYLIKE); 215 216 mdb_lex_reset(); 217 218 kmdb_kdi_init(kav->kav_kdi, kav); 219 220 if (kmdb_dpi_init(kav) < 0) { 221 warn("Couldn't initialize kernel/PROM interface\n"); 222 return (-1); 223 } 224 225 /* 226 * Path evaluation part 1: Create the initial module path to allow 227 * the target constructor to load a support module. We base kmdb's 228 * module path off the kernel's module path unless the user has 229 * explicitly supplied one. 230 */ 231 mdb_set_ipath(KMDB_DEF_IPATH); 232 if (strlen(mdb.m_lpathstr) > 0) { 233 mdb_set_lpath(mdb.m_lpathstr); 234 } else { 235 char *lpath; 236 237 if (kav->kav_modpath != NULL && *kav->kav_modpath != '\0' && 238 (lpath = kmdb_modpath2lpath(kav->kav_modpath)) != NULL) { 239 mdb_set_lpath(lpath); 240 strfree(lpath); 241 } else { 242 mdb_set_lpath(KMDB_DEF_LPATH); 243 } 244 } 245 246 if (mdb_get_prompt() == NULL) 247 (void) mdb_set_prompt(MDB_DEF_PROMPT); 248 249 tgt = mdb_tgt_create(tgt_ctor, mdb.m_tgtflags, 0, NULL); 250 251 if (tgt == NULL) { 252 warn("failed to initialize target"); 253 return (-1); 254 } 255 256 mdb_tgt_activate(tgt); 257 258 mdb_create_loadable_disasms(); 259 260 /* 261 * Path evaluation part 2: Re-evaluate the path now that the target 262 * is ready (and thus we have access to the real platform string). 263 */ 264 mdb_set_ipath(mdb.m_ipathstr); 265 mdb_set_lpath(mdb.m_lpathstr); 266 267 if (!(mdb.m_flags & MDB_FL_NOMODS)) 268 mdb_module_load_all(MDB_MOD_DEFER); 269 270 /* Allocate the main debugger stack */ 271 kmdb_main_stack = mdb_alloc(KMDB_STACK_SIZE, UM_SLEEP); 272 kmdb_main_stack_size = KMDB_STACK_SIZE; 273 274 kmdb_kdi_end_init(); 275 276 return (0); 277 } 278 279 /* 280 * First-time kmdb startup. Run when kmdb has control of the machine for the 281 * first time. 282 */ 283 static void 284 kmdb_startup(void) 285 { 286 mdb_io_t *inio, *outio; 287 288 if (mdb.m_termtype == NULL) { 289 /* 290 * The terminal type wasn't specified, so we guess. If we're 291 * on console, we'll get a terminal type from the PROM. If not, 292 * we'll use the default. 293 */ 294 if ((mdb.m_termtype = kmdb_prom_term_type()) == NULL) { 295 warn("unable to determine terminal type: assuming " 296 "`" KMDB_DEF_TERM_TYPE "'\n"); 297 mdb.m_termtype = strdup(KMDB_DEF_TERM_TYPE); 298 } 299 mdb.m_flags |= MDB_FL_TERMGUESS; 300 301 } else if (mdb.m_flags & MDB_FL_TERMGUESS) { 302 /* 303 * The terminal type wasn't specified by the user, but a guess 304 * was made using either $TERM or a property from the SMF. A 305 * terminal type from the PROM code overrides the guess, so 306 * we'll use that if we can. 307 */ 308 char *promttype; 309 310 if ((promttype = kmdb_prom_term_type()) != NULL) { 311 strfree(mdb.m_termtype); 312 mdb.m_termtype = strdup(promttype); 313 } 314 } 315 316 inio = kmdb_promio_create("stdin"); 317 outio = kmdb_promio_create("stdout"); 318 319 if ((mdb.m_term = mdb_termio_create(mdb.m_termtype, inio, outio)) == 320 NULL && strcmp(mdb.m_termtype, KMDB_DEF_TERM_TYPE) != 0) { 321 warn("failed to set terminal type to `%s', using `" 322 KMDB_DEF_TERM_TYPE "'\n", mdb.m_termtype); 323 324 strfree(mdb.m_termtype); 325 mdb.m_termtype = strdup(KMDB_DEF_TERM_TYPE); 326 327 if ((mdb.m_term = mdb_termio_create(mdb.m_termtype, inio, 328 outio)) == NULL) { 329 fail("failed to set terminal type to `" 330 KMDB_DEF_TERM_TYPE "'\n"); 331 } 332 } 333 334 mdb_iob_destroy(mdb.m_in); 335 mdb.m_in = mdb_iob_create(mdb.m_term, MDB_IOB_RDONLY); 336 mdb_iob_setpager(mdb.m_out, mdb.m_term); 337 mdb_iob_setflags(mdb.m_out, MDB_IOB_PGENABLE); 338 339 kmdb_kvm_startup(); 340 341 /* 342 * kmdb_init() and kctl_activate() may have been talking to each other, 343 * and may have left some messages for us. The driver -> debugger 344 * queue is normally processed during the resume path, so we have to 345 * do it manually here if we want it to be run for first startup. 346 */ 347 kmdb_dpi_process_work_queue(); 348 349 kmdb_kvm_poststartup(); 350 } 351 352 void 353 kmdb_main(void) 354 { 355 int status; 356 357 kmdb_dpi_set_state(DPI_STATE_STOPPED, 0); 358 mdb_printf("\nWelcome to kmdb\n"); 359 kmdb_startup(); 360 361 /* 362 * Debugger termination is a bit tricky. For compatibility with kadb, 363 * neither an EOF on stdin nor a normal ::quit will cause the debugger 364 * to unload. In both cases, they get a trip to OBP, after which the 365 * debugger returns. 366 * 367 * The only supported way to cause the debugger to unload is to specify 368 * the unload flag to ::quit, or to have the driver request it. The 369 * driver request is the primary exit mechanism - the ::quit flag is 370 * provided for convenience. 371 * 372 * Both forms of "exit" (unqualified ::quit that won't cause an unload, 373 * and a driver request that will) are signalled by an MDB_ERR_QUIT. In 374 * the latter case, however, the KDI will have the unload request. 375 */ 376 for (;;) { 377 status = mdb_run(); 378 379 if (status == MDB_ERR_QUIT && kmdb_kdi_get_unload_request()) { 380 break; 381 382 } else if (status == MDB_ERR_QUIT || status == 0) { 383 kmdb_dpi_enter_mon(); 384 385 } else if (status == MDB_ERR_OUTPUT) { 386 /* 387 * If a write failed on stdout, give up. A more 388 * informative error message will already have been 389 * printed by mdb_run(). 390 */ 391 if (mdb_iob_getflags(mdb.m_out) & MDB_IOB_ERR) 392 fail("write to stdout failed, exiting\n"); 393 394 } else if (status != MDB_ERR_ABORT) { 395 fail("debugger exited abnormally (status = %s)\n", 396 mdb_err2str(status)); 397 } 398 } 399 400 mdb_destroy(); 401 402 kmdb_dpi_resume_unload(); 403 404 /*NOTREACHED*/ 405 } 406