xref: /titanic_51/usr/src/uts/sun4u/serengeti/io/sbdp_mem.c (revision 8fc99e42676a23421c75e76660640f9765d693b1)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  * memory management for serengeti dr memory
29  */
30 
31 #include <sys/obpdefs.h>
32 #include <sys/types.h>
33 #include <sys/conf.h>
34 #include <sys/ddi.h>
35 #include <sys/cpuvar.h>
36 #include <sys/memlist_impl.h>
37 #include <sys/machsystm.h>
38 #include <sys/promif.h>
39 #include <sys/mem_cage.h>
40 #include <sys/kmem.h>
41 #include <sys/note.h>
42 #include <sys/lgrp.h>
43 
44 #include <sys/sbd_ioctl.h>
45 #include <sys/sbd.h>
46 #include <sys/sbdp_priv.h>
47 #include <sys/sbdp_mem.h>
48 #include <sys/sun4asi.h>
49 #include <sys/cheetahregs.h>
50 #include <sys/cpu_module.h>
51 #include <sys/esunddi.h>
52 
53 #include <vm/page.h>
54 
55 static int	sbdp_get_meminfo(pnode_t, int, uint64_t *, uint64_t *);
56 int		mc_read_regs(pnode_t, mc_regs_t *);
57 uint64_t	mc_get_addr(pnode_t, int, uint_t *);
58 static pnode_t	mc_get_sibling_cpu(pnode_t nodeid);
59 static int	mc_get_sibling_cpu_impl(pnode_t nodeid);
60 static sbd_cond_t mc_check_sibling_cpu(pnode_t nodeid);
61 static void	_sbdp_copy_rename_end(void);
62 static int	sbdp_copy_rename__relocatable(sbdp_cr_handle_t *,
63 			struct memlist *, sbdp_rename_script_t *);
64 static int	sbdp_prep_rename_script(sbdp_cr_handle_t *);
65 static int	sbdp_get_lowest_addr_in_node(pnode_t, uint64_t *);
66 
67 extern void bcopy32_il(uint64_t, uint64_t);
68 extern void flush_ecache_il(uint64_t physaddr, size_t size, size_t linesize);
69 extern uint64_t lddphys_il(uint64_t physaddr);
70 extern uint64_t ldxasi_il(uint64_t physaddr, uint_t asi);
71 extern void sbdp_exec_script_il(sbdp_rename_script_t *rsp);
72 void sbdp_fill_bank_info(uint64_t, sbdp_bank_t **);
73 int sbdp_add_nodes_banks(pnode_t node, sbdp_bank_t **banks);
74 void sbdp_add_bank_to_seg(sbdp_bank_t *);
75 void sbdp_remove_bank_from_seg(sbdp_bank_t *);
76 uint64_t sbdp_determine_slice(sbdp_handle_t *);
77 sbdp_seg_t *sbdp_get_seg(uint64_t);
78 #ifdef DEBUG
79 void sbdp_print_seg(sbdp_seg_t *);
80 #endif
81 
82 /*
83  * Head to the system segments link list
84  */
85 sbdp_seg_t *sys_seg = NULL;
86 
87 uint64_t
88 sbdp_determine_slice(sbdp_handle_t *hp)
89 {
90 	int size;
91 
92 	size = sbdp_get_mem_size(hp);
93 
94 	if (size <= SG_SLICE_16G_SIZE) {
95 		return (SG_SLICE_16G_SIZE);
96 	} else if (size <= SG_SLICE_32G_SIZE) {
97 		return (SG_SLICE_32G_SIZE);
98 	} else {
99 		return (SG_SLICE_64G_SIZE);
100 	}
101 }
102 
103 /* ARGSUSED */
104 int
105 sbdp_get_mem_alignment(sbdp_handle_t *hp, dev_info_t *dip, uint64_t *align)
106 {
107 	*align = sbdp_determine_slice(hp);
108 	return (0);
109 }
110 
111 
112 void
113 sbdp_memlist_dump(struct memlist *mlist)
114 {
115 	register struct memlist *ml;
116 
117 	if (mlist == NULL) {
118 		SBDP_DBG_MEM("memlist> EMPTY\n");
119 	} else {
120 		for (ml = mlist; ml; ml = ml->ml_next)
121 			SBDP_DBG_MEM("memlist>  0x%" PRIx64", 0x%" PRIx64"\n",
122 			    ml->ml_address, ml->ml_size);
123 	}
124 }
125 
126 struct mem_arg {
127 	int	board;
128 	int	ndips;
129 	dev_info_t **list;
130 };
131 
132 /*
133  * Returns mem dip held
134  */
135 static int
136 sbdp_get_mem_dip(pnode_t node, void *arg, uint_t flags)
137 {
138 	_NOTE(ARGUNUSED(flags))
139 
140 	dev_info_t *dip;
141 	pnode_t nodeid;
142 	mem_op_t mem = {0};
143 	struct mem_arg *ap = arg;
144 
145 	if (node == OBP_BADNODE || node == OBP_NONODE)
146 		return (DDI_FAILURE);
147 
148 	mem.nodes = &nodeid;
149 	mem.board = ap->board;
150 	mem.nmem = 0;
151 
152 	(void) sbdp_is_mem(node, &mem);
153 
154 	ASSERT(mem.nmem == 0 || mem.nmem == 1);
155 
156 	if (mem.nmem == 0 || nodeid != node)
157 		return (DDI_FAILURE);
158 
159 	dip = e_ddi_nodeid_to_dip(nodeid);
160 	if (dip) {
161 		ASSERT(ap->ndips < SBDP_MAX_MEM_NODES_PER_BOARD);
162 		ap->list[ap->ndips++] = dip;
163 	}
164 	return (DDI_SUCCESS);
165 }
166 
167 struct memlist *
168 sbdp_get_memlist(sbdp_handle_t *hp, dev_info_t *dip)
169 {
170 	_NOTE(ARGUNUSED(dip))
171 
172 	int i, j, skip = 0;
173 	dev_info_t	*list[SBDP_MAX_MEM_NODES_PER_BOARD];
174 	struct mem_arg	arg = {0};
175 	uint64_t	base_pa, size;
176 	struct memlist	*mlist = NULL;
177 
178 	list[0] = NULL;
179 	arg.board = hp->h_board;
180 	arg.list = list;
181 
182 	sbdp_walk_prom_tree(prom_rootnode(), sbdp_get_mem_dip, &arg);
183 
184 	for (i = 0; i < arg.ndips; i++) {
185 		if (list[i] == NULL)
186 			continue;
187 
188 		size = 0;
189 		for (j = 0; j < SBDP_MAX_MCS_PER_NODE; j++) {
190 			if (sbdp_get_meminfo(ddi_get_nodeid(list[i]), j,
191 			    &size, &base_pa)) {
192 				skip++;
193 				continue;
194 			}
195 			if (size == -1 || size == 0)
196 				continue;
197 
198 			(void) memlist_add_span(base_pa, size, &mlist);
199 		}
200 
201 		/*
202 		 * Release hold acquired in sbdp_get_mem_dip()
203 		 */
204 		ddi_release_devi(list[i]);
205 	}
206 
207 	/*
208 	 * XXX - The following two lines are from existing code.
209 	 * However, this appears to be incorrect - this check should be
210 	 * made for each dip in list i.e within the for(i) loop.
211 	 */
212 	if (skip == SBDP_MAX_MCS_PER_NODE)
213 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
214 
215 	SBDP_DBG_MEM("memlist for board %d\n", hp->h_board);
216 	sbdp_memlist_dump(mlist);
217 	return (mlist);
218 }
219 
220 struct memlist *
221 sbdp_memlist_dup(struct memlist *mlist)
222 {
223 	struct memlist *hl, *prev;
224 
225 	if (mlist == NULL)
226 		return (NULL);
227 
228 	prev = NULL;
229 	hl = NULL;
230 	for (; mlist; mlist = mlist->ml_next) {
231 		struct memlist *mp;
232 
233 		mp = memlist_get_one();
234 		if (mp == NULL) {
235 			if (hl != NULL)
236 				memlist_free_list(hl);
237 			hl = NULL;
238 			break;
239 		}
240 		mp->ml_address = mlist->ml_address;
241 		mp->ml_size = mlist->ml_size;
242 		mp->ml_next = NULL;
243 		mp->ml_prev = prev;
244 
245 		if (prev == NULL)
246 			hl = mp;
247 		else
248 			prev->ml_next = mp;
249 		prev = mp;
250 	}
251 
252 	return (hl);
253 }
254 
255 int
256 sbdp_del_memlist(sbdp_handle_t *hp, struct memlist *mlist)
257 {
258 	_NOTE(ARGUNUSED(hp))
259 
260 	memlist_free_list(mlist);
261 
262 	return (0);
263 }
264 
265 /*ARGSUSED*/
266 static void
267 sbdp_flush_ecache(uint64_t a, uint64_t b)
268 {
269 	cpu_flush_ecache();
270 }
271 
272 typedef enum {
273 	SBDP_CR_OK,
274 	SBDP_CR_MC_IDLE_ERR
275 } sbdp_cr_err_t;
276 
277 int
278 sbdp_move_memory(sbdp_handle_t *hp, int t_bd)
279 {
280 	sbdp_bd_t	*s_bdp, *t_bdp;
281 	int		err = 0;
282 	caddr_t		mempage;
283 	ulong_t		data_area, index_area;
284 	ulong_t		e_area, e_page;
285 	int		availlen, indexlen, funclen, scriptlen;
286 	int		*indexp;
287 	time_t		copytime;
288 	int		(*funcp)();
289 	size_t		size;
290 	struct memlist	*mlist;
291 	sbdp_sr_handle_t	*srhp;
292 	sbdp_rename_script_t	*rsp;
293 	sbdp_rename_script_t	*rsbuffer;
294 	sbdp_cr_handle_t	*cph;
295 	int		linesize;
296 	uint64_t	neer;
297 	sbdp_cr_err_t	cr_err;
298 
299 	cph =  kmem_zalloc(sizeof (sbdp_cr_handle_t), KM_SLEEP);
300 
301 	SBDP_DBG_MEM("moving memory from memory board %d to board %d\n",
302 	    hp->h_board, t_bd);
303 
304 	s_bdp = sbdp_get_bd_info(hp->h_wnode, hp->h_board);
305 	t_bdp = sbdp_get_bd_info(hp->h_wnode, t_bd);
306 
307 	if ((s_bdp == NULL) || (t_bdp == NULL)) {
308 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
309 		return (-1);
310 	}
311 
312 	funclen = (int)((ulong_t)_sbdp_copy_rename_end -
313 	    (ulong_t)sbdp_copy_rename__relocatable);
314 
315 	if (funclen > PAGESIZE) {
316 		cmn_err(CE_WARN,
317 		    "sbdp: copy-rename funclen (%d) > PAGESIZE (%d)",
318 		    funclen, PAGESIZE);
319 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
320 		return (-1);
321 	}
322 
323 	/*
324 	 * mempage will be page aligned, since we're calling
325 	 * kmem_alloc() with an exact multiple of PAGESIZE.
326 	 */
327 	mempage = kmem_alloc(PAGESIZE, KM_SLEEP);
328 
329 	SBDP_DBG_MEM("mempage = 0x%p\n", (void *)mempage);
330 
331 	/*
332 	 * Copy the code for the copy-rename routine into
333 	 * a page aligned piece of memory.  We do this to guarantee
334 	 * that we're executing within the same page and thus reduce
335 	 * the possibility of cache collisions between different
336 	 * pages.
337 	 */
338 	bcopy((caddr_t)sbdp_copy_rename__relocatable, mempage, funclen);
339 
340 	funcp = (int (*)())mempage;
341 
342 	SBDP_DBG_MEM("copy-rename funcp = 0x%p (len = 0x%x)\n", (void *)funcp,
343 	    funclen);
344 
345 	/*
346 	 * Prepare data page that will contain script of
347 	 * operations to perform during copy-rename.
348 	 * Allocate temporary buffer to hold script.
349 	 */
350 
351 	size = sizeof (sbdp_rename_script_t) * SBDP_RENAME_MAXOP;
352 	rsbuffer = kmem_zalloc(size, KM_SLEEP);
353 
354 	cph->s_bdp = s_bdp;
355 	cph->t_bdp = t_bdp;
356 	cph->script = rsbuffer;
357 
358 	/*
359 	 * We need to make sure we don't switch cpus since we depend on the
360 	 * correct cpu processing
361 	 */
362 	affinity_set(CPU_CURRENT);
363 	scriptlen = sbdp_prep_rename_script(cph);
364 	if (scriptlen <= 0) {
365 		cmn_err(CE_WARN, "sbdp failed to prep for copy-rename");
366 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
367 		err = 1;
368 		goto cleanup;
369 	}
370 	SBDP_DBG_MEM("copy-rename script length = 0x%x\n", scriptlen);
371 
372 	indexlen = sizeof (*indexp) << 1;
373 
374 	if ((funclen + scriptlen + indexlen) > PAGESIZE) {
375 		cmn_err(CE_WARN, "sbdp: func len (%d) + script len (%d) "
376 		    "+ index len (%d) > PAGESIZE (%d)", funclen, scriptlen,
377 		    indexlen, PAGESIZE);
378 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
379 		err = 1;
380 		goto cleanup;
381 	}
382 
383 	linesize = cpunodes[CPU->cpu_id].ecache_linesize;
384 
385 	/*
386 	 * Find aligned area within data page to maintain script.
387 	 */
388 	data_area = (ulong_t)mempage;
389 	data_area += (ulong_t)funclen + (ulong_t)(linesize - 1);
390 	data_area &= ~((ulong_t)(linesize - 1));
391 
392 	availlen = PAGESIZE - indexlen;
393 	availlen -= (int)(data_area - (ulong_t)mempage);
394 
395 	if (availlen < scriptlen) {
396 		cmn_err(CE_WARN, "sbdp: available len (%d) < script len (%d)",
397 		    availlen, scriptlen);
398 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
399 		err = 1;
400 		goto cleanup;
401 	}
402 
403 	SBDP_DBG_MEM("copy-rename script data area = 0x%lx\n",
404 	    data_area);
405 
406 	bcopy((caddr_t)rsbuffer, (caddr_t)data_area, scriptlen);
407 	rsp = (sbdp_rename_script_t *)data_area;
408 
409 	index_area = data_area + (ulong_t)scriptlen + (ulong_t)(linesize - 1);
410 	index_area &= ~((ulong_t)(linesize - 1));
411 	indexp = (int *)index_area;
412 	indexp[0] = 0;
413 	indexp[1] = 0;
414 
415 	e_area = index_area + (ulong_t)indexlen;
416 	e_page = (ulong_t)mempage + PAGESIZE;
417 	if (e_area > e_page) {
418 		cmn_err(CE_WARN,
419 		    "sbdp: index area size (%d) > available (%d)\n",
420 		    indexlen, (int)(e_page - index_area));
421 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
422 		err = 1;
423 		goto cleanup;
424 	}
425 
426 	SBDP_DBG_MEM("copy-rename index area = 0x%p\n", (void *)indexp);
427 
428 	SBDP_DBG_MEM("cpu %d\n", CPU->cpu_id);
429 
430 	srhp = sbdp_get_sr_handle();
431 	ASSERT(srhp);
432 
433 	srhp->sr_flags = hp->h_flags;
434 
435 	copytime = ddi_get_lbolt();
436 
437 	mutex_enter(&s_bdp->bd_mutex);
438 	mlist = sbdp_memlist_dup(s_bdp->ml);
439 	mutex_exit(&s_bdp->bd_mutex);
440 
441 	if (mlist == NULL) {
442 		SBDP_DBG_MEM("Didn't find memory list\n");
443 	}
444 	SBDP_DBG_MEM("src\n\tbd\t%d\n\tnode\t%d\n\tbpa 0x%lx\n\tnodes\t%p\n",
445 	    s_bdp->bd, s_bdp->wnode, s_bdp->bpa, (void *)s_bdp->nodes);
446 	sbdp_memlist_dump(s_bdp->ml);
447 	SBDP_DBG_MEM("tgt\n\tbd\t%d\n\tnode\t%d\n\tbpa 0x%lx\n\tnodes\t%p\n",
448 	    t_bdp->bd, t_bdp->wnode, t_bdp->bpa, (void *)t_bdp->nodes);
449 	sbdp_memlist_dump(t_bdp->ml);
450 
451 	/*
452 	 * Quiesce the OS.
453 	 */
454 	if (sbdp_suspend(srhp)) {
455 		sbd_error_t	*sep;
456 		cmn_err(CE_WARN, "sbdp: failed to quiesce OS for copy-rename");
457 		sep = &srhp->sep;
458 		sbdp_set_err(hp->h_err, sep->e_code, sep->e_rsc);
459 		sbdp_release_sr_handle(srhp);
460 		(void) sbdp_del_memlist(hp, mlist);
461 		err = 1;
462 		goto cleanup;
463 	}
464 
465 	/*
466 	 * =================================
467 	 * COPY-RENAME BEGIN.
468 	 * =================================
469 	 */
470 	SBDP_DBG_MEM("s_base 0x%lx t_base 0x%lx\n", cph->s_bdp->bpa,
471 	    cph->t_bdp->bpa);
472 
473 	cph->ret = 0;
474 
475 	SBDP_DBG_MEM("cph return 0x%lx\n", cph->ret);
476 
477 	SBDP_DBG_MEM("Flushing all of the cpu caches\n");
478 	xc_all(sbdp_flush_ecache, 0, 0);
479 
480 	/* disable CE reporting */
481 	neer = get_error_enable();
482 	set_error_enable(neer & ~EN_REG_CEEN);
483 
484 	cr_err = (*funcp)(cph, mlist, rsp);
485 
486 	/* enable CE reporting */
487 	set_error_enable(neer);
488 
489 	SBDP_DBG_MEM("s_base 0x%lx t_base 0x%lx\n", cph->s_bdp->bpa,
490 	    cph->t_bdp->bpa);
491 	SBDP_DBG_MEM("cph return 0x%lx\n", cph->ret);
492 	SBDP_DBG_MEM("after execking the function\n");
493 
494 	/*
495 	 * =================================
496 	 * COPY-RENAME END.
497 	 * =================================
498 	 */
499 	SBDP_DBG_MEM("err is 0x%d\n", err);
500 
501 	/*
502 	 * Resume the OS.
503 	 */
504 	sbdp_resume(srhp);
505 	if (srhp->sep.e_code) {
506 		sbd_error_t	*sep;
507 		cmn_err(CE_WARN,
508 		    "sbdp: failed to resume OS for copy-rename");
509 		sep = &srhp->sep;
510 		sbdp_set_err(hp->h_err, sep->e_code, sep->e_rsc);
511 		err = 1;
512 	}
513 
514 	copytime = ddi_get_lbolt() - copytime;
515 
516 	sbdp_release_sr_handle(srhp);
517 	(void) sbdp_del_memlist(hp, mlist);
518 
519 	SBDP_DBG_MEM("copy-rename elapsed time = %ld ticks (%ld secs)\n",
520 	    copytime, copytime / hz);
521 
522 	switch (cr_err) {
523 	case SBDP_CR_OK:
524 		break;
525 	case SBDP_CR_MC_IDLE_ERR: {
526 		dev_info_t *dip;
527 		pnode_t nodeid = cph->busy_mc->node;
528 		char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP);
529 
530 		dip = e_ddi_nodeid_to_dip(nodeid);
531 
532 		ASSERT(dip != NULL);
533 
534 		(void) ddi_pathname(dip, path);
535 		ddi_release_devi(dip);
536 		cmn_err(CE_WARN, "failed to idle memory controller %s: "
537 		    "copy-rename aborted", path);
538 		kmem_free(path, MAXPATHLEN);
539 		sbdp_set_err(hp->h_err, ESBD_MEMFAIL, NULL);
540 		err = 1;
541 		break;
542 	}
543 	default:
544 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
545 		cmn_err(CE_WARN, "unknown copy-rename error code (%d)", cr_err);
546 		err = 1;
547 		break;
548 	}
549 
550 	if (err)
551 		goto cleanup;
552 
553 	/*
554 	 * Rename memory for lgroup.
555 	 * Source and target board numbers are packaged in arg.
556 	 */
557 	lgrp_plat_config(LGRP_CONFIG_MEM_RENAME,
558 	    (uintptr_t)(s_bdp->bd | (t_bdp->bd << 16)));
559 
560 	/*
561 	 * swap list of banks
562 	 */
563 	sbdp_swap_list_of_banks(s_bdp, t_bdp);
564 
565 	/*
566 	 * Update the cached board info for both the source and the target
567 	 */
568 	sbdp_update_bd_info(s_bdp);
569 	sbdp_update_bd_info(t_bdp);
570 
571 	/*
572 	 * Tell the sc that we have swapped slices.
573 	 */
574 	if (sbdp_swap_slices(s_bdp->bd, t_bdp->bd) != 0) {
575 		/* This is dangerous. The in use slice could be re-used! */
576 		SBDP_DBG_MEM("swaping slices failed\n");
577 	}
578 
579 cleanup:
580 	kmem_free(rsbuffer, size);
581 	kmem_free(mempage, PAGESIZE);
582 	kmem_free(cph, sizeof (sbdp_cr_handle_t));
583 	affinity_clear();
584 
585 	return (err ? -1 : 0);
586 }
587 
588 static int
589 sbdp_copy_regs(pnode_t node, uint64_t bpa, uint64_t new_base, int inval,
590 	sbdp_rename_script_t *rsp, int *index)
591 {
592 	int		i, m;
593 	mc_regs_t	regs;
594 	uint64_t	*mc_decode;
595 
596 	if (mc_read_regs(node, &regs)) {
597 		SBDP_DBG_MEM("sbdp_copy_regs: failed to read source Decode "
598 		    "Regs");
599 		return (-1);
600 	}
601 
602 	mc_decode = regs.mc_decode;
603 
604 	m = *index;
605 	for (i = 0; i < SBDP_MAX_MCS_PER_NODE; i++) {
606 		uint64_t	offset, seg_pa, tmp_base;
607 
608 		/*
609 		 * Skip invalid banks
610 		 */
611 		if ((mc_decode[i] & SG_DECODE_VALID) != SG_DECODE_VALID) {
612 			continue;
613 		}
614 
615 		tmp_base = new_base;
616 		if (!inval) {
617 			/*
618 			 * We need to calculate the offset from the base pa
619 			 * to add it appropriately to the new_base.
620 			 * The offset needs to be in UM relative to the mc
621 			 * decode register.  Since we are going from physical
622 			 * address to UM, we need to shift it by PHYS2UM_SHIFT.
623 			 * To get it ready to OR it with the MC decode reg,
624 			 * we need to shift it left MC_UM_SHIFT
625 			 */
626 			seg_pa = MC_BASE(mc_decode[i]) << PHYS2UM_SHIFT;
627 			offset = (seg_pa - bpa);
628 			/* Convert tmp_base into a physical address */
629 			tmp_base = (tmp_base >> MC_UM_SHIFT) << PHYS2UM_SHIFT;
630 			tmp_base += offset;
631 			/* Convert tmp_base to be MC reg ready */
632 			tmp_base = (tmp_base >> PHYS2UM_SHIFT) << MC_UM_SHIFT;
633 		}
634 
635 		mc_decode[i] &= ~SG_DECODE_UM;
636 		mc_decode[i] |= tmp_base;
637 		mc_decode[i] |= SG_DECODE_VALID;
638 
639 		/*
640 		 * Step 1:	Write source base address to the MC
641 		 *		with present bit off.
642 		 */
643 		rsp[m].masr_addr = mc_get_addr(node, i, &rsp[m].asi);
644 		rsp[m].masr = mc_decode[i] & ~SG_DECODE_VALID;
645 		m++;
646 		/*
647 		 * Step 2:	Now rewrite the mc reg with present bit on.
648 		 */
649 		rsp[m].masr_addr = rsp[m-1].masr_addr;
650 		rsp[m].masr = mc_decode[i];
651 		rsp[m].asi = rsp[m-1].asi;
652 		m++;
653 	}
654 
655 	*index = m;
656 	return (0);
657 }
658 
659 static int
660 sbdp_get_reg_addr(pnode_t nodeid, uint64_t *pa)
661 {
662 	mc_regspace	reg;
663 	int		len;
664 
665 	len = prom_getproplen(nodeid, "reg");
666 	if (len != sizeof (mc_regspace))
667 		return (-1);
668 
669 	if (prom_getprop(nodeid, "reg", (caddr_t)&reg) < 0)
670 		return (-1);
671 
672 	ASSERT(pa != NULL);
673 
674 	*pa = ((uint64_t)reg.regspec_addr_hi) << 32;
675 	*pa |= (uint64_t)reg.regspec_addr_lo;
676 
677 	return (0);
678 }
679 
680 static int
681 mc_get_sibling_cpu_impl(pnode_t mc_node)
682 {
683 	int	len, impl;
684 	pnode_t	cpu_node;
685 	char	namebuf[OBP_MAXPROPNAME];
686 
687 	cpu_node = mc_get_sibling_cpu(mc_node);
688 	if (cpu_node == OBP_NONODE) {
689 		SBDP_DBG_MEM("mc_get_sibling_cpu failed: dnode=0x%x\n",
690 		    mc_node);
691 		return (-1);
692 	}
693 
694 	len = prom_getproplen(cpu_node, "name");
695 	if (len < 0) {
696 		SBDP_DBG_MEM("invalid prom_getproplen for name prop: "
697 		    "len=%d, dnode=0x%x\n", len, cpu_node);
698 		return (-1);
699 	}
700 
701 	if (prom_getprop(cpu_node, "name", (caddr_t)namebuf) == -1) {
702 		SBDP_DBG_MEM("failed to read name property for dnode=0x%x\n",
703 		    cpu_node);
704 		return (-1);
705 	}
706 
707 	/*
708 	 * If this is a CMP node, the child has the implementation
709 	 * property.
710 	 */
711 	if (strcmp(namebuf, "cmp") == 0) {
712 		cpu_node = prom_childnode(cpu_node);
713 		ASSERT(cpu_node != OBP_NONODE);
714 	}
715 
716 	if (prom_getprop(cpu_node, "implementation#", (caddr_t)&impl) == -1) {
717 		SBDP_DBG_MEM("failed to read implementation# property for "
718 		    "dnode=0x%x\n", cpu_node);
719 		return (-1);
720 	}
721 
722 	SBDP_DBG_MEM("mc_get_sibling_cpu_impl: found impl=0x%x, dnode=0x%x\n",
723 	    impl, cpu_node);
724 
725 	return (impl);
726 }
727 
728 /*
729  * Provide EMU Activity Status register ASI and address.  Only valid for
730  * Panther processors.
731  */
732 static int
733 mc_get_idle_reg(pnode_t nodeid, uint64_t *addr, uint_t *asi)
734 {
735 	int	portid;
736 	uint64_t reg_pa;
737 
738 	ASSERT(nodeid != OBP_NONODE);
739 	ASSERT(mc_get_sibling_cpu_impl(nodeid) == PANTHER_IMPL);
740 
741 	if (prom_getprop(nodeid, "portid", (caddr_t)&portid) < 0 ||
742 	    portid == -1) {
743 		SBDP_DBG_MEM("mc_get_idle_reg: failed to read portid prop "
744 		    "for dnode=0x%x\n", nodeid);
745 		return (-1);
746 	}
747 
748 	if (sbdp_get_reg_addr(nodeid, &reg_pa) != 0) {
749 		SBDP_DBG_MEM("mc_get_idle_reg: failed to read reg prop "
750 		    "for dnode=0x%x\n", nodeid);
751 		return (-1);
752 	}
753 
754 	/*
755 	 * Local access will be via ASI 0x4a, otherwise via Safari PIO.
756 	 * This assumes the copy-rename will later run on the same proc,
757 	 * hence there is an assumption we are already bound.
758 	 */
759 	ASSERT(curthread->t_bound_cpu == CPU);
760 	if (SG_CPUID_TO_PORTID(CPU->cpu_id) == portid) {
761 		*addr = ASI_EMU_ACT_STATUS_VA;
762 		*asi = ASI_SAFARI_CONFIG;
763 	} else {
764 		*addr = MC_ACTIVITY_STATUS(reg_pa);
765 		*asi = ASI_IO;
766 	}
767 
768 	return (0);
769 }
770 
771 /*
772  * If non-Panther board, add phys_banks entry for each physical bank.
773  * If Panther board, add mc_idle_regs entry for each EMU Activity Status
774  * register.  Increment the array indices b_idx and r_idx for each entry
775  * populated by this routine.
776  *
777  * The caller is responsible for allocating sufficient array entries.
778  */
779 static int
780 sbdp_prep_mc_idle_one(sbdp_bd_t *bp, sbdp_rename_script_t phys_banks[],
781     int *b_idx, sbdp_mc_idle_script_t mc_idle_regs[], int *r_idx)
782 {
783 	int		i, j;
784 	pnode_t		*memnodes;
785 	mc_regs_t	regs;
786 	uint64_t	addr;
787 	uint_t		asi;
788 	sbd_cond_t	sibling_cpu_cond;
789 	int		impl = -1;
790 
791 	memnodes = bp->nodes;
792 
793 	for (i = 0; i < SBDP_MAX_MEM_NODES_PER_BOARD; i++) {
794 		if (memnodes[i] == OBP_NONODE) {
795 			continue;
796 		}
797 
798 		/* MC should not be accessed if cpu has failed  */
799 		sibling_cpu_cond = mc_check_sibling_cpu(memnodes[i]);
800 		if (sibling_cpu_cond == SBD_COND_FAILED ||
801 		    sibling_cpu_cond == SBD_COND_UNUSABLE) {
802 			SBDP_DBG_MEM("sbdp: skipping MC with failed cpu: "
803 			    "board=%d, mem node=%d, condition=%d",
804 			    bp->bd, i, sibling_cpu_cond);
805 			continue;
806 		}
807 
808 		/*
809 		 * Initialize the board cpu type, assuming all board cpus are
810 		 * the same type.  This is true of all Cheetah-based processors.
811 		 * Failure to read the cpu type is considered a fatal error.
812 		 */
813 		if (impl == -1) {
814 			impl = mc_get_sibling_cpu_impl(memnodes[i]);
815 			if (impl == -1) {
816 				SBDP_DBG_MEM("sbdp: failed to get cpu impl "
817 				    "for MC dnode=0x%x\n", memnodes[i]);
818 				return (-1);
819 			}
820 		}
821 
822 		switch (impl) {
823 		case CHEETAH_IMPL:
824 		case CHEETAH_PLUS_IMPL:
825 		case JAGUAR_IMPL:
826 			if (mc_read_regs(memnodes[i], &regs)) {
827 				SBDP_DBG_MEM("sbdp: failed to read source "
828 				    "Decode Regs of board %d", bp->bd);
829 				return (-1);
830 			}
831 
832 			for (j = 0; j < SBDP_MAX_MCS_PER_NODE; j++) {
833 				uint64_t mc_decode = regs.mc_decode[j];
834 
835 				if ((mc_decode & SG_DECODE_VALID) !=
836 				    SG_DECODE_VALID) {
837 					continue;
838 				}
839 
840 				addr = (MC_BASE(mc_decode) << PHYS2UM_SHIFT) |
841 				    (MC_LM(mc_decode) << MC_LM_SHIFT);
842 
843 				phys_banks[*b_idx].masr_addr = addr;
844 				phys_banks[*b_idx].masr = 0;	/* unused */
845 				phys_banks[*b_idx].asi = ASI_MEM;
846 				(*b_idx)++;
847 			}
848 			break;
849 		case PANTHER_IMPL:
850 			if (mc_get_idle_reg(memnodes[i], &addr, &asi)) {
851 				return (-1);
852 			}
853 
854 			mc_idle_regs[*r_idx].addr = addr;
855 			mc_idle_regs[*r_idx].asi = asi;
856 			mc_idle_regs[*r_idx].node = memnodes[i];
857 			mc_idle_regs[*r_idx].bd_id = bp->bd;
858 			(*r_idx)++;
859 			break;
860 		default:
861 			cmn_err(CE_WARN, "Unknown cpu implementation=0x%x",
862 			    impl);
863 			ASSERT(0);
864 			return (-1);
865 		}
866 	}
867 
868 	return (0);
869 }
870 
871 /*
872  * For non-Panther MCs that do not support read-bypass-write, we do a read
873  * to each physical bank, relying on the reads to block until all outstanding
874  * write requests have completed.  This mechanism is referred to as the bus
875  * sync list and is used for Cheetah, Cheetah+, and Jaguar processors.  The
876  * bus sync list PAs for the source and target are kept together and comprise
877  * Section 1 of the rename script.
878  *
879  * For Panther processors that support the EMU Activity Status register,
880  * we ensure the writes have completed by polling the MCU_ACT_STATUS
881  * field several times to make sure the MC queues are empty.  The
882  * EMU Activity Status register PAs for the source and target are
883  * kept together and comprise Section 2 of the rename script.
884  */
885 static int
886 sbdp_prep_mc_idle_script(sbdp_bd_t *s_bp, sbdp_bd_t *t_bp,
887     sbdp_rename_script_t *rsp, int *rsp_idx)
888 {
889 	sbdp_rename_script_t *phys_banks;
890 	sbdp_mc_idle_script_t *mc_idle_regs;
891 	int	max_banks, max_regs;
892 	size_t	bsize, msize;
893 	int	nbanks = 0, nregs = 0;
894 	int	i;
895 
896 	/* CONSTCOND */
897 	ASSERT(sizeof (sbdp_rename_script_t) ==
898 	    sizeof (sbdp_mc_idle_script_t));
899 
900 	/* allocate space for both source and target */
901 	max_banks = SBDP_MAX_MEM_NODES_PER_BOARD *
902 	    SG_MAX_BANKS_PER_MC * 2;
903 	max_regs = SBDP_MAX_MEM_NODES_PER_BOARD * 2;
904 
905 	bsize = sizeof (sbdp_rename_script_t) * max_banks;
906 	msize = sizeof (sbdp_mc_idle_script_t) * max_regs;
907 
908 	phys_banks = kmem_zalloc(bsize, KM_SLEEP);
909 	mc_idle_regs = kmem_zalloc(msize, KM_SLEEP);
910 
911 	if (sbdp_prep_mc_idle_one(t_bp, phys_banks, &nbanks,
912 	    mc_idle_regs, &nregs) != 0 ||
913 	    sbdp_prep_mc_idle_one(s_bp, phys_banks, &nbanks,
914 	    mc_idle_regs, &nregs) != 0) {
915 		kmem_free(phys_banks, bsize);
916 		kmem_free(mc_idle_regs, msize);
917 		return (-1);
918 	}
919 
920 	/* section 1 */
921 	for (i = 0; i < nbanks; i++)
922 		rsp[(*rsp_idx)++] = phys_banks[i];
923 
924 	/* section 2 */
925 	for (i = 0; i < nregs; i++)
926 		rsp[(*rsp_idx)++] = *(sbdp_rename_script_t *)&mc_idle_regs[i];
927 
928 	kmem_free(phys_banks, bsize);
929 	kmem_free(mc_idle_regs, msize);
930 
931 	return (0);
932 }
933 
934 /*
935  * code assumes single mem-unit.
936  */
937 static int
938 sbdp_prep_rename_script(sbdp_cr_handle_t *cph)
939 {
940 	pnode_t			*s_nodes, *t_nodes;
941 	int			m = 0, i;
942 	sbdp_bd_t		s_bd, t_bd, *s_bdp, *t_bdp;
943 	sbdp_rename_script_t	*rsp;
944 	uint64_t		new_base, old_base, temp_base;
945 	int			s_num, t_num;
946 
947 	mutex_enter(&cph->s_bdp->bd_mutex);
948 	s_bd = *cph->s_bdp;
949 	mutex_exit(&cph->s_bdp->bd_mutex);
950 	mutex_enter(&cph->t_bdp->bd_mutex);
951 	t_bd = *cph->t_bdp;
952 	mutex_exit(&cph->t_bdp->bd_mutex);
953 
954 	s_bdp = &s_bd;
955 	t_bdp = &t_bd;
956 	s_nodes = s_bdp->nodes;
957 	t_nodes = t_bdp->nodes;
958 	s_num = s_bdp->nnum;
959 	t_num = t_bdp->nnum;
960 	rsp = cph->script;
961 
962 	/*
963 	 * Calculate the new base address for the target bd
964 	 */
965 
966 	new_base = (s_bdp->bpa >> PHYS2UM_SHIFT) << MC_UM_SHIFT;
967 
968 	/*
969 	 * Calculate the old base address for the source bd
970 	 */
971 
972 	old_base = (t_bdp->bpa >> PHYS2UM_SHIFT) << MC_UM_SHIFT;
973 
974 	temp_base = SG_INVAL_UM;
975 
976 	SBDP_DBG_MEM("new 0x%lx old_base ox%lx temp_base 0x%lx\n", new_base,
977 	    old_base, temp_base);
978 
979 	m = 0;
980 
981 	/*
982 	 * Ensure the MC queues have been idled on the source and target
983 	 * following the copy.
984 	 */
985 	if (sbdp_prep_mc_idle_script(s_bdp, t_bdp, rsp, &m) < 0)
986 		return (-1);
987 
988 	/*
989 	 * Script section terminator
990 	 */
991 	rsp[m].masr_addr = 0ull;
992 	rsp[m].masr = 0;
993 	rsp[m].asi = 0;
994 	m++;
995 
996 	/*
997 	 * Invalidate the base in the target mc registers
998 	 */
999 	for (i = 0; i < t_num; i++) {
1000 		if (sbdp_copy_regs(t_nodes[i], t_bdp->bpa, temp_base, 1, rsp,
1001 		    &m) < 0)
1002 			return (-1);
1003 	}
1004 	/*
1005 	 * Invalidate the base in the source mc registers
1006 	 */
1007 	for (i = 0; i < s_num; i++) {
1008 		if (sbdp_copy_regs(s_nodes[i], s_bdp->bpa, temp_base, 1, rsp,
1009 		    &m) < 0)
1010 			return (-1);
1011 	}
1012 	/*
1013 	 * Copy the new base into the targets mc registers
1014 	 */
1015 	for (i = 0; i < t_num; i++) {
1016 		if (sbdp_copy_regs(t_nodes[i], t_bdp->bpa, new_base, 0, rsp,
1017 		    &m) < 0)
1018 			return (-1);
1019 	}
1020 	/*
1021 	 * Copy the old base into the source mc registers
1022 	 */
1023 	for (i = 0; i < s_num; i++) {
1024 		if (sbdp_copy_regs(s_nodes[i], s_bdp->bpa, old_base, 0, rsp,
1025 		    &m) < 0)
1026 			return (-1);
1027 	}
1028 	/*
1029 	 * Zero masr_addr value indicates the END.
1030 	 */
1031 	rsp[m].masr_addr = 0ull;
1032 	rsp[m].masr = 0;
1033 	rsp[m].asi = 0;
1034 	m++;
1035 
1036 #ifdef DEBUG
1037 	{
1038 		int	i;
1039 
1040 		SBDP_DBG_MEM("dumping copy-rename script:\n");
1041 		for (i = 0; i < m; i++) {
1042 			SBDP_DBG_MEM("0x%lx = 0x%lx, asi 0x%x\n",
1043 			    rsp[i].masr_addr, rsp[i].masr, rsp[i].asi);
1044 		}
1045 		DELAY(1000000);
1046 	}
1047 #endif /* DEBUG */
1048 
1049 	return (m * sizeof (sbdp_rename_script_t));
1050 }
1051 
1052 /*
1053  * EMU Activity Status Register needs to be read idle several times.
1054  * See Panther PRM 12.5.
1055  */
1056 #define	SBDP_MCU_IDLE_RETRIES	10
1057 #define	SBDP_MCU_IDLE_READS	3
1058 
1059 /*
1060  * Using the "__relocatable" suffix informs DTrace providers (and anything
1061  * else, for that matter) that this function's text may be manually relocated
1062  * elsewhere before it is executed.  That is, it cannot be safely instrumented
1063  * with any methodology that is PC-relative.
1064  */
1065 static int
1066 sbdp_copy_rename__relocatable(sbdp_cr_handle_t *hp, struct memlist *mlist,
1067 		register sbdp_rename_script_t *rsp)
1068 {
1069 	sbdp_cr_err_t	err = SBDP_CR_OK;
1070 	size_t		csize;
1071 	size_t		linesize;
1072 	uint_t		size;
1073 	uint64_t	caddr;
1074 	uint64_t	s_base, t_base;
1075 	sbdp_bd_t	*s_sbp, *t_sbp;
1076 	struct memlist	*ml;
1077 	sbdp_mc_idle_script_t *isp;
1078 	int		i;
1079 
1080 	caddr = ecache_flushaddr;
1081 	csize = (size_t)(cpunodes[CPU->cpu_id].ecache_size * 2);
1082 	linesize = (size_t)(cpunodes[CPU->cpu_id].ecache_linesize);
1083 
1084 	size = 0;
1085 	s_sbp = hp->s_bdp;
1086 	t_sbp = hp->t_bdp;
1087 
1088 	s_base = (uint64_t)s_sbp->bpa;
1089 	t_base = (uint64_t)t_sbp->bpa;
1090 
1091 	hp->ret = s_base;
1092 	/*
1093 	 * DO COPY.
1094 	 */
1095 	for (ml = mlist; ml; ml = ml->ml_next) {
1096 		uint64_t	s_pa, t_pa;
1097 		uint64_t	nbytes;
1098 
1099 		s_pa = ml->ml_address;
1100 		t_pa = t_base + (ml->ml_address - s_base);
1101 		nbytes = ml->ml_size;
1102 
1103 		size += nbytes;
1104 		while (nbytes != 0ull) {
1105 			/*
1106 			 * This copy does NOT use an ASI
1107 			 * that avoids the Ecache, therefore
1108 			 * the dst_pa addresses may remain
1109 			 * in our Ecache after the dst_pa
1110 			 * has been removed from the system.
1111 			 * A subsequent write-back to memory
1112 			 * will cause an ARB-stop because the
1113 			 * physical address no longer exists
1114 			 * in the system. Therefore we must
1115 			 * flush out local Ecache after we
1116 			 * finish the copy.
1117 			 */
1118 
1119 			/* copy 32 bytes at src_pa to dst_pa */
1120 			bcopy32_il(s_pa, t_pa);
1121 
1122 			/* increment by 32 bytes */
1123 			s_pa += (4 * sizeof (uint64_t));
1124 			t_pa += (4 * sizeof (uint64_t));
1125 
1126 			/* decrement by 32 bytes */
1127 			nbytes -= (4 * sizeof (uint64_t));
1128 		}
1129 	}
1130 
1131 	/*
1132 	 * Since bcopy32_il() does NOT use an ASI to bypass
1133 	 * the Ecache, we need to flush our Ecache after
1134 	 * the copy is complete.
1135 	 */
1136 	flush_ecache_il(caddr, csize, linesize);	/* inline version */
1137 
1138 	/*
1139 	 * Non-Panther MCs are idled by reading each physical bank.
1140 	 */
1141 	for (i = 0; rsp[i].asi == ASI_MEM; i++) {
1142 		(void) lddphys_il(rsp[i].masr_addr);
1143 	}
1144 
1145 	isp = (sbdp_mc_idle_script_t *)&rsp[i];
1146 
1147 	/*
1148 	 * Panther MCs are idled by polling until the MCU idle state
1149 	 * is read SBDP_MCU_IDLE_READS times in succession.
1150 	 */
1151 	while (isp->addr != 0ull) {
1152 		for (i = 0; i < SBDP_MCU_IDLE_RETRIES; i++) {
1153 			register uint64_t v;
1154 			register int n_idle = 0;
1155 
1156 
1157 			do {
1158 				v = ldxasi_il(isp->addr, isp->asi) &
1159 				    MCU_ACT_STATUS;
1160 			} while (v != MCU_ACT_STATUS &&
1161 			    ++n_idle < SBDP_MCU_IDLE_READS);
1162 
1163 			if (n_idle == SBDP_MCU_IDLE_READS)
1164 				break;
1165 		}
1166 
1167 		if (i == SBDP_MCU_IDLE_RETRIES) {
1168 			/* bailout */
1169 			hp->busy_mc = isp;
1170 			return (SBDP_CR_MC_IDLE_ERR);
1171 		}
1172 
1173 		isp++;
1174 	}
1175 
1176 	/* skip terminator */
1177 	isp++;
1178 
1179 	/*
1180 	 * The following inline assembly routine caches
1181 	 * the rename script and then caches the code that
1182 	 * will do the rename.  This is necessary
1183 	 * so that we don't have any memory references during
1184 	 * the reprogramming.  We accomplish this by first
1185 	 * jumping through the code to guarantee it's cached
1186 	 * before we actually execute it.
1187 	 */
1188 	sbdp_exec_script_il((sbdp_rename_script_t *)isp);
1189 
1190 	return (err);
1191 }
1192 static void
1193 _sbdp_copy_rename_end(void)
1194 {
1195 	/*
1196 	 * IMPORTANT:   This function's location MUST be located immediately
1197 	 *		following sbdp_copy_rename__relocatable to accurately
1198 	 *		estimate its size.  Note that this assumes (!)the
1199 	 *		compiler keeps these functions in the order in which
1200 	 *		they appear :-o
1201 	 */
1202 }
1203 int
1204 sbdp_memory_rename(sbdp_handle_t *hp)
1205 {
1206 #ifdef lint
1207 	/*
1208 	 * Delete when implemented
1209 	 */
1210 	hp = hp;
1211 #endif
1212 	return (0);
1213 }
1214 
1215 
1216 /*
1217  * In Serengeti this is a nop
1218  */
1219 int
1220 sbdp_post_configure_mem(sbdp_handle_t *hp)
1221 {
1222 #ifdef lint
1223 	hp = hp;
1224 #endif
1225 	return (0);
1226 }
1227 
1228 /*
1229  * In Serengeti this is a nop
1230  */
1231 int
1232 sbdp_post_unconfigure_mem(sbdp_handle_t *hp)
1233 {
1234 #ifdef lint
1235 	hp = hp;
1236 #endif
1237 	return (0);
1238 }
1239 
1240 /* ARGSUSED */
1241 int
1242 sbdphw_disable_memctrl(sbdp_handle_t *hp, dev_info_t *dip)
1243 {
1244 	return (0);
1245 }
1246 
1247 /* ARGSUSED */
1248 int
1249 sbdphw_enable_memctrl(sbdp_handle_t *hp, dev_info_t *dip)
1250 {
1251 	return (0);
1252 }
1253 
1254 /*
1255  * We are assuming one memory node therefore the base address is the lowest
1256  * segment possible
1257  */
1258 #define	PA_ABOVE_MAX	(0x8000000000000000ull)
1259 int
1260 sbdphw_get_base_physaddr(sbdp_handle_t *hp, dev_info_t *dip, uint64_t *pa)
1261 {
1262 	_NOTE(ARGUNUSED(hp))
1263 
1264 	int i, board = -1, wnode;
1265 	pnode_t	nodeid;
1266 	struct mem_arg arg = {0};
1267 	uint64_t seg_pa, tmp_pa;
1268 	dev_info_t *list[SBDP_MAX_MEM_NODES_PER_BOARD];
1269 	int rc;
1270 
1271 	if (dip == NULL)
1272 		return (-1);
1273 
1274 	nodeid = ddi_get_nodeid(dip);
1275 
1276 	if (sbdp_get_bd_and_wnode_num(nodeid, &board, &wnode) < 0)
1277 		return (-1);
1278 
1279 	list[0] = NULL;
1280 	arg.board = board;
1281 	arg.list = list;
1282 
1283 	(void) sbdp_walk_prom_tree(prom_rootnode(), sbdp_get_mem_dip, &arg);
1284 
1285 	if (arg.ndips <= 0)
1286 		return (-1);
1287 
1288 	seg_pa = PA_ABOVE_MAX;
1289 
1290 	rc = -1;
1291 	for (i = 0; i < arg.ndips; i++) {
1292 		if (list[i] == NULL)
1293 			continue;
1294 		if (sbdp_get_lowest_addr_in_node(ddi_get_nodeid(list[i]),
1295 		    &tmp_pa) == 0) {
1296 			rc = 0;
1297 			if (tmp_pa < seg_pa)
1298 				seg_pa = tmp_pa;
1299 		}
1300 
1301 		/*
1302 		 * Release hold acquired in sbdp_get_mem_dip()
1303 		 */
1304 		ddi_release_devi(list[i]);
1305 	}
1306 
1307 	if (rc == 0)
1308 		*pa = seg_pa;
1309 	else {
1310 		/*
1311 		 * Record the fact that an error has occurred
1312 		 */
1313 		sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
1314 	}
1315 
1316 	return (rc);
1317 }
1318 
1319 static int
1320 sbdp_get_lowest_addr_in_node(pnode_t node, uint64_t *pa)
1321 {
1322 	uint64_t	mc_decode, seg_pa, tmp_pa;
1323 	mc_regs_t	mc_regs, *mc_regsp = &mc_regs;
1324 	int		i, valid;
1325 	int		rc;
1326 
1327 
1328 	seg_pa = PA_ABOVE_MAX;
1329 
1330 	if (mc_read_regs(node, mc_regsp)) {
1331 		SBDP_DBG_MEM("sbdp_get_lowest_addr_in_node: failed to "
1332 		    "read source Decode Regs\n");
1333 		return (-1);
1334 	}
1335 
1336 	rc = -1;
1337 	for (i = 0; i < SBDP_MAX_MCS_PER_NODE; i++) {
1338 		mc_decode = mc_regsp->mc_decode[i];
1339 		valid = mc_decode >> MC_VALID_SHIFT;
1340 		tmp_pa = MC_BASE(mc_decode) << PHYS2UM_SHIFT;
1341 		if (valid)
1342 			rc = 0;
1343 		if (valid && (tmp_pa < seg_pa))
1344 			seg_pa = tmp_pa;
1345 	}
1346 
1347 	if (rc == 0)
1348 		*pa = seg_pa;
1349 
1350 	return (rc);
1351 }
1352 
1353 int
1354 sbdp_is_mem(pnode_t node, void *arg)
1355 {
1356 	mem_op_t	*memp = (mem_op_t *)arg;
1357 	char		type[OBP_MAXPROPNAME];
1358 	int		bd;
1359 	pnode_t		*list;
1360 	int		board;
1361 	char		name[OBP_MAXDRVNAME];
1362 	int		len;
1363 
1364 	ASSERT(memp);
1365 
1366 	list = memp->nodes;
1367 	board = memp->board;
1368 
1369 	/*
1370 	 * Make sure that this node doesn't have its status
1371 	 * as failed
1372 	 */
1373 	if (sbdp_get_comp_status(node) != SBD_COND_OK) {
1374 		return (DDI_FAILURE);
1375 	}
1376 
1377 	len = prom_getproplen(node, "device_type");
1378 	if ((len > 0) && (len < OBP_MAXPROPNAME))
1379 		(void) prom_getprop(node, "device_type", (caddr_t)type);
1380 	else
1381 		type[0] = '\0';
1382 
1383 	if (strcmp(type, "memory-controller") == 0) {
1384 		int	wnode;
1385 
1386 		if (sbdp_get_bd_and_wnode_num(node, &bd, &wnode) < 0)
1387 			return (DDI_FAILURE);
1388 
1389 		if (bd == board) {
1390 			/*
1391 			 * Make sure we don't overwrite the array
1392 			 */
1393 			if (memp->nmem >= SBDP_MAX_MEM_NODES_PER_BOARD)
1394 				return (DDI_FAILURE);
1395 			(void) prom_getprop(node, OBP_NAME, (caddr_t)name);
1396 			SBDP_DBG_MEM("name %s  boot bd %d board %d\n", name,
1397 			    board, bd);
1398 			list[memp->nmem++] = node;
1399 			return (DDI_SUCCESS);
1400 		}
1401 	}
1402 
1403 	return (DDI_FAILURE);
1404 }
1405 
1406 static int
1407 sbdp_get_meminfo(pnode_t nodeid, int mc, uint64_t *size, uint64_t *base_pa)
1408 {
1409 	int		board, wnode;
1410 	int		valid;
1411 	mc_regs_t	mc_regs, *mc_regsp = &mc_regs;
1412 	uint64_t	mc_decode = 0;
1413 
1414 	if (sbdp_get_bd_and_wnode_num(nodeid, &board, &wnode) < 0)
1415 		return (-1);
1416 
1417 	if (mc_read_regs(nodeid, mc_regsp)) {
1418 		SBDP_DBG_MEM("sbdp_get_meminfo: failed to read source "
1419 		    "Decode Regs");
1420 		return (-1);
1421 	}
1422 	/*
1423 	 * Calculate memory size
1424 	 */
1425 	mc_decode = mc_regsp->mc_decode[mc];
1426 
1427 	/*
1428 	 * Check the valid bit to see if bank is there
1429 	 */
1430 	valid = mc_decode >> MC_VALID_SHIFT;
1431 	if (valid) {
1432 		*size = MC_UK2SPAN(mc_decode);
1433 		*base_pa = MC_BASE(mc_decode) << PHYS2UM_SHIFT;
1434 	}
1435 
1436 	return (0);
1437 }
1438 
1439 
1440 /*
1441  * Luckily for us mem nodes and cpu/CMP nodes are siblings.  All we need to
1442  * do is search in the same branch as the mem node for its sibling cpu or
1443  * CMP node.
1444  */
1445 pnode_t
1446 mc_get_sibling_cpu(pnode_t nodeid)
1447 {
1448 	int	portid;
1449 
1450 	if (prom_getprop(nodeid, OBP_PORTID, (caddr_t)&portid) < 0)
1451 		return (OBP_NONODE);
1452 
1453 	/*
1454 	 * cpus and memory are siblings so we don't need to traverse
1455 	 * the whole tree, just a branch
1456 	 */
1457 	return (sbdp_find_nearby_cpu_by_portid(nodeid, portid));
1458 }
1459 
1460 /*
1461  * Given a memory node, check it's sibling cpu or CMP to see if
1462  * access to mem will be ok. We need to search for the node and
1463  * if found get its condition.
1464  */
1465 sbd_cond_t
1466 mc_check_sibling_cpu(pnode_t nodeid)
1467 {
1468 	pnode_t	cpu_node;
1469 	sbd_cond_t	cond;
1470 	int		i;
1471 
1472 	cpu_node = mc_get_sibling_cpu(nodeid);
1473 
1474 	cond = sbdp_get_comp_status(cpu_node);
1475 
1476 	if (cond == SBD_COND_OK) {
1477 		int 		wnode;
1478 		int		bd;
1479 		int		unit;
1480 		int		portid;
1481 
1482 		if (sbdp_get_bd_and_wnode_num(nodeid, &bd, &wnode) < 0)
1483 			return (SBD_COND_UNKNOWN);
1484 
1485 		(void) prom_getprop(nodeid, OBP_PORTID, (caddr_t)&portid);
1486 
1487 		/*
1488 		 * Access to the memory controller should not
1489 		 * be attempted if any of the cores are marked
1490 		 * as being in reset.
1491 		 */
1492 		for (i = 0; i < SBDP_MAX_CORES_PER_CMP; i++) {
1493 			unit = SG_PORTID_TO_CPU_UNIT(portid, i);
1494 			if (sbdp_is_cpu_present(wnode, bd, unit) &&
1495 			    sbdp_is_cpu_in_reset(wnode, bd, unit)) {
1496 				cond = SBD_COND_UNUSABLE;
1497 				break;
1498 			}
1499 		}
1500 	}
1501 
1502 	return (cond);
1503 }
1504 
1505 int
1506 mc_read_regs(pnode_t nodeid, mc_regs_t *mc_regsp)
1507 {
1508 	int			len;
1509 	uint64_t		mc_addr, mask;
1510 	mc_regspace		reg;
1511 	sbd_cond_t		sibling_cpu_cond;
1512 	int			local_mc;
1513 	int			portid;
1514 	int			i;
1515 
1516 	if ((prom_getprop(nodeid, "portid", (caddr_t)&portid) < 0) ||
1517 	    (portid == -1))
1518 		return (-1);
1519 
1520 	/*
1521 	 * mc should not be accessed if their corresponding cpu
1522 	 * has failed.
1523 	 */
1524 	sibling_cpu_cond = mc_check_sibling_cpu(nodeid);
1525 
1526 	if ((sibling_cpu_cond == SBD_COND_FAILED) ||
1527 	    (sibling_cpu_cond == SBD_COND_UNUSABLE)) {
1528 		return (-1);
1529 	}
1530 
1531 	len = prom_getproplen(nodeid, "reg");
1532 	if (len != sizeof (mc_regspace))
1533 		return (-1);
1534 
1535 	if (prom_getprop(nodeid, "reg", (caddr_t)&reg) < 0)
1536 		return (-1);
1537 
1538 	mc_addr = ((uint64_t)reg.regspec_addr_hi) << 32;
1539 	mc_addr |= (uint64_t)reg.regspec_addr_lo;
1540 
1541 	/*
1542 	 * Make sure we don't switch cpus
1543 	 */
1544 	affinity_set(CPU_CURRENT);
1545 	if (portid == cpunodes[CPU->cpu_id].portid)
1546 		local_mc = 1;
1547 	else
1548 		local_mc = 0;
1549 
1550 	for (i = 0; i < SG_MAX_BANKS_PER_MC; i++) {
1551 		mask = SG_REG_2_OFFSET(i);
1552 
1553 		/*
1554 		 * If the memory controller is local to this CPU, we use
1555 		 * the special ASI to read the decode registers.
1556 		 * Otherwise, we load the values from a magic address in
1557 		 * I/O space.
1558 		 */
1559 		if (local_mc) {
1560 			mc_regsp->mc_decode[i] = lddmcdecode(
1561 			    mask & MC_OFFSET_MASK);
1562 		} else {
1563 			mc_regsp->mc_decode[i] = lddphysio(
1564 			    (mc_addr | mask));
1565 		}
1566 	}
1567 	affinity_clear();
1568 
1569 	return (0);
1570 }
1571 
1572 uint64_t
1573 mc_get_addr(pnode_t nodeid, int mc, uint_t *asi)
1574 {
1575 	int			len;
1576 	uint64_t		mc_addr, addr;
1577 	mc_regspace		reg;
1578 	int			portid;
1579 	int			local_mc;
1580 
1581 	if ((prom_getprop(nodeid, "portid", (caddr_t)&portid) < 0) ||
1582 	    (portid == -1))
1583 		return (-1);
1584 
1585 	len = prom_getproplen(nodeid, "reg");
1586 	if (len != sizeof (mc_regspace))
1587 		return (-1);
1588 
1589 	if (prom_getprop(nodeid, "reg", (caddr_t)&reg) < 0)
1590 		return (-1);
1591 
1592 	mc_addr = ((uint64_t)reg.regspec_addr_hi) << 32;
1593 	mc_addr |= (uint64_t)reg.regspec_addr_lo;
1594 
1595 	/*
1596 	 * Make sure we don't switch cpus
1597 	 */
1598 	affinity_set(CPU_CURRENT);
1599 	if (portid == cpunodes[CPU->cpu_id].portid)
1600 		local_mc = 1;
1601 	else
1602 		local_mc = 0;
1603 
1604 	if (local_mc) {
1605 		*asi = ASI_MC_DECODE;
1606 		addr = SG_REG_2_OFFSET(mc) & MC_OFFSET_MASK;
1607 	} else {
1608 		*asi = ASI_IO;
1609 		addr = SG_REG_2_OFFSET(mc) | mc_addr;
1610 	}
1611 	affinity_clear();
1612 
1613 	return (addr);
1614 }
1615 
1616 /* ARGSUSED */
1617 int
1618 sbdp_mem_add_span(sbdp_handle_t *hp, uint64_t address, uint64_t size)
1619 {
1620 	return (0);
1621 }
1622 
1623 int
1624 sbdp_mem_del_span(sbdp_handle_t *hp, uint64_t address, uint64_t size)
1625 {
1626 	pfn_t		 basepfn = (pfn_t)(address >> PAGESHIFT);
1627 	pgcnt_t		 npages = (pgcnt_t)(size >> PAGESHIFT);
1628 
1629 	if (size > 0) {
1630 		int rv;
1631 		rv = kcage_range_delete_post_mem_del(basepfn, npages);
1632 		if (rv != 0) {
1633 			cmn_err(CE_WARN,
1634 			    "unexpected kcage_range_delete_post_mem_del"
1635 			    " return value %d", rv);
1636 			sbdp_set_err(hp->h_err, ESGT_INTERNAL, NULL);
1637 			return (-1);
1638 		}
1639 	}
1640 	return (0);
1641 }
1642 
1643 /*
1644  * This routine gets the size including the
1645  * bad banks
1646  */
1647 int
1648 sbdp_get_mem_size(sbdp_handle_t *hp)
1649 {
1650 	uint64_t	size = 0;
1651 	struct memlist	*mlist, *ml;
1652 
1653 	mlist = sbdp_get_memlist(hp, (dev_info_t *)NULL);
1654 
1655 	for (ml = mlist; ml; ml = ml->ml_next)
1656 		size += ml->ml_size;
1657 
1658 	(void) sbdp_del_memlist(hp, mlist);
1659 
1660 	SBDP_DBG_MEM("sbdp_get_mem_size: size 0x%" PRIx64 "\n", size);
1661 
1662 	return (btop(size));
1663 }
1664 
1665 /*
1666  * This function compares the list of banks passed with the banks
1667  * in the segment
1668  */
1669 int
1670 sbdp_check_seg_with_banks(sbdp_seg_t *seg, sbdp_bank_t *banks)
1671 {
1672 	sbdp_bank_t	*cur_bank, *bank;
1673 	int		i = 0;
1674 
1675 	for (cur_bank = seg->banks; cur_bank; cur_bank = cur_bank->seg_next) {
1676 		for (bank = banks; bank; bank = bank->bd_next) {
1677 			if (!bank->valid)
1678 				continue;
1679 
1680 			if (cur_bank == bank) {
1681 				i++;
1682 			}
1683 		}
1684 	}
1685 
1686 	SBDP_DBG_MEM("banks found = %d total banks = %d\n", i, seg->nbanks);
1687 	/*
1688 	 * If we find the same num of banks that are equal, then this segment
1689 	 * is not interleaved across boards
1690 	 */
1691 	if (i == seg->nbanks)
1692 		return (0);
1693 
1694 	return (1);
1695 }
1696 
1697 
1698 /*
1699  * This routine determines if any of the memory banks on the board
1700  * participate in across board memory interleaving
1701  */
1702 int
1703 sbdp_isinterleaved(sbdp_handle_t *hp, dev_info_t *dip)
1704 {
1705 	_NOTE(ARGUNUSED(dip))
1706 
1707 	sbdp_bank_t	*bankp;
1708 	int		wnode, board;
1709 	int		is_interleave = 0;
1710 	sbdp_bd_t	*bdp;
1711 	uint64_t	base;
1712 	sbdp_seg_t	*seg;
1713 
1714 	board = hp->h_board;
1715 	wnode = hp->h_wnode;
1716 
1717 #ifdef DEBUG
1718 	sbdp_print_all_segs();
1719 #endif
1720 	/*
1721 	 * Get the banks for this board
1722 	 */
1723 	bdp = sbdp_get_bd_info(wnode, board);
1724 
1725 	if (bdp == NULL)
1726 		return (-1);
1727 
1728 	/*
1729 	 * Search for the first bank with valid memory
1730 	 */
1731 	for (bankp = bdp->banks; bankp; bankp = bankp->bd_next)
1732 		if (bankp->valid)
1733 			break;
1734 
1735 	/*
1736 	 * If there are no banks in the board, then the board is
1737 	 * not interleaved across boards
1738 	 */
1739 	if (bankp == NULL) {
1740 		return (0);
1741 	}
1742 
1743 	base = bankp->um & ~(bankp->uk);
1744 
1745 	/*
1746 	 * Find the segment for the first bank
1747 	 */
1748 	if ((seg = sbdp_get_seg(base)) == NULL) {
1749 		/*
1750 		 * Something bad has happened.
1751 		 */
1752 		return (-1);
1753 	}
1754 	/*
1755 	 * Make sure that this segment is only composed of the banks
1756 	 * in this board. If one is missing or we have an extra one
1757 	 * the board is interleaved across boards
1758 	 */
1759 	is_interleave = sbdp_check_seg_with_banks(seg, bdp->banks);
1760 
1761 	SBDP_DBG_MEM("interleave is %d\n", is_interleave);
1762 
1763 	return (is_interleave);
1764 }
1765 
1766 
1767 /*
1768  * Each node has 4 logical banks.  This routine adds all the banks (including
1769  * the invalid ones to the passed list. Note that we use the bd list and not
1770  * the seg list
1771  */
1772 int
1773 sbdp_add_nodes_banks(pnode_t node, sbdp_bank_t **banks)
1774 {
1775 	int		i;
1776 	mc_regs_t	regs;
1777 	uint64_t	*mc_decode;
1778 	sbdp_bank_t 	*bank;
1779 
1780 	if (mc_read_regs(node, &regs) == -1)
1781 		return (-1);
1782 
1783 	mc_decode = regs.mc_decode;
1784 
1785 	for (i = 0; i < SBDP_MAX_MCS_PER_NODE; i++) {
1786 		/*
1787 		 * This creates the mem for the new member of the list
1788 		 */
1789 		sbdp_fill_bank_info(mc_decode[i], &bank);
1790 
1791 		SBDP_DBG_MEM("adding bank %d\n", bank->id);
1792 
1793 		/*
1794 		 * Insert bank into the beginning of the list
1795 		 */
1796 		bank->bd_next = *banks;
1797 		*banks = bank;
1798 
1799 		/*
1800 		 * Add this bank into its corresponding
1801 		 * segment
1802 		 */
1803 		sbdp_add_bank_to_seg(bank);
1804 	}
1805 	return (0);
1806 }
1807 
1808 /*
1809  * given the info, create a new bank node and set the info
1810  * as appropriate. We allocate the memory for the bank. It is
1811  * up to the caller to ensure the mem is freed
1812  */
1813 void
1814 sbdp_fill_bank_info(uint64_t mc_decode, sbdp_bank_t **bank)
1815 {
1816 	static int	id = 0;
1817 	sbdp_bank_t	*new;
1818 
1819 	new = kmem_zalloc(sizeof (sbdp_bank_t), KM_SLEEP);
1820 
1821 	new->id = id++;
1822 	new->valid = (mc_decode >> MC_VALID_SHIFT);
1823 	new->uk = MC_UK(mc_decode);
1824 	new->um = MC_UM(mc_decode);
1825 	new->lk = MC_LK(mc_decode);
1826 	new->lm = MC_LM(mc_decode);
1827 	new->bd_next = NULL;
1828 	new->seg_next = NULL;
1829 
1830 	*bank = new;
1831 }
1832 
1833 /*
1834  * Each bd has the potential of having mem banks on it.  The banks
1835  * may be empty or not.  This routine gets all the mem banks
1836  * for this bd
1837  */
1838 void
1839 sbdp_init_bd_banks(sbdp_bd_t *bdp)
1840 {
1841 	int		i, nmem;
1842 	pnode_t		*lists;
1843 
1844 	lists = bdp->nodes;
1845 	nmem = bdp->nnum;
1846 
1847 	if (bdp->banks != NULL) {
1848 		return;
1849 	}
1850 
1851 	bdp->banks = NULL;
1852 
1853 	for (i = 0; i < nmem; i++) {
1854 		(void) sbdp_add_nodes_banks(lists[i], &bdp->banks);
1855 	}
1856 }
1857 
1858 /*
1859  * swap the list of banks for the 2 boards
1860  */
1861 void
1862 sbdp_swap_list_of_banks(sbdp_bd_t *bdp1, sbdp_bd_t *bdp2)
1863 {
1864 	sbdp_bank_t	*tmp_ptr;
1865 
1866 	if ((bdp1 == NULL) || (bdp2 == NULL))
1867 		return;
1868 
1869 	tmp_ptr = bdp1->banks;
1870 	bdp1->banks = bdp2->banks;
1871 	bdp2->banks = tmp_ptr;
1872 }
1873 
1874 /*
1875  * free all the banks on the board.  Note that a bank node belongs
1876  * to 2 lists. The first list is the board list. The second one is
1877  * the seg list. We only need to remove the bank from both lists but only
1878  * free the node once.
1879  */
1880 void
1881 sbdp_fini_bd_banks(sbdp_bd_t *bdp)
1882 {
1883 	sbdp_bank_t	*bkp, *nbkp;
1884 
1885 	for (bkp = bdp->banks; bkp; ) {
1886 		/*
1887 		 * Remove the bank from the seg list first
1888 		 */
1889 		SBDP_DBG_MEM("Removing bank %d\n", bkp->id);
1890 		sbdp_remove_bank_from_seg(bkp);
1891 		nbkp = bkp->bd_next;
1892 		bkp->bd_next = NULL;
1893 		kmem_free(bkp, sizeof (sbdp_bank_t));
1894 
1895 		bkp = nbkp;
1896 	}
1897 	bdp->banks = NULL;
1898 }
1899 
1900 #ifdef DEBUG
1901 void
1902 sbdp_print_bd_banks(sbdp_bd_t *bdp)
1903 {
1904 	sbdp_bank_t	*bp;
1905 	int		i;
1906 
1907 	SBDP_DBG_MEM("BOARD %d\n", bdp->bd);
1908 
1909 	for (bp = bdp->banks, i = 0; bp; bp = bp->bd_next, i++) {
1910 		SBDP_DBG_MEM("BANK [%d]:\n", bp->id);
1911 		SBDP_DBG_MEM("\tvalid %d\tuk 0x%x\tum 0x%x\tlk 0x%x"
1912 		    "\tlm 0x%x\n", bp->valid, bp->uk, bp->um,
1913 		    bp->lk, bp->lm);
1914 	}
1915 }
1916 
1917 void
1918 sbdp_print_all_segs(void)
1919 {
1920 	sbdp_seg_t	*cur_seg;
1921 
1922 	for (cur_seg = sys_seg; cur_seg; cur_seg = cur_seg->next)
1923 		sbdp_print_seg(cur_seg);
1924 }
1925 
1926 void
1927 sbdp_print_seg(sbdp_seg_t *seg)
1928 {
1929 	sbdp_bank_t	*bp;
1930 	int		i;
1931 
1932 	SBDP_DBG_MEM("SEG %d\n", seg->id);
1933 
1934 	for (bp = seg->banks, i = 0; bp; bp = bp->seg_next, i++) {
1935 		SBDP_DBG_MEM("BANK [%d]:\n", bp->id);
1936 		SBDP_DBG_MEM("\tvalid %d\tuk 0x%x\tum 0x%x\tlk 0x%x"
1937 		    "\tlm 0x%x\n", bp->valid, bp->uk, bp->um,
1938 		    bp->lk, bp->lm);
1939 	}
1940 }
1941 #endif
1942 
1943 void
1944 sbdp_add_bank_to_seg(sbdp_bank_t *bank)
1945 {
1946 	uint64_t	base;
1947 	sbdp_seg_t	*cur_seg;
1948 	static int	id = 0;
1949 
1950 	/*
1951 	 * if we got an invalid bank just skip it
1952 	 */
1953 	if (bank == NULL || !bank->valid)
1954 		return;
1955 	base = bank->um & ~(bank->uk);
1956 
1957 	if ((cur_seg = sbdp_get_seg(base)) == NULL) {
1958 		/*
1959 		 * This bank is part of a new segment, so create
1960 		 * a struct for it and added to the list of segments
1961 		 */
1962 		cur_seg = kmem_zalloc(sizeof (sbdp_seg_t), KM_SLEEP);
1963 		cur_seg->id = id++;
1964 		cur_seg->base = base;
1965 		cur_seg->size = ((bank->uk +1) << PHYS2UM_SHIFT);
1966 		cur_seg->intlv = ((bank->lk ^ 0xF) + 1);
1967 		/*
1968 		 * add to the seg list
1969 		 */
1970 		cur_seg->next = sys_seg;
1971 		sys_seg = cur_seg;
1972 	}
1973 
1974 	cur_seg->nbanks++;
1975 	/*
1976 	 * add bank into segs bank list.  Note we add at the head
1977 	 */
1978 	bank->seg_next = cur_seg->banks;
1979 	cur_seg->banks = bank;
1980 }
1981 
1982 /*
1983  * Remove this segment from the seg list
1984  */
1985 void
1986 sbdp_rm_seg(sbdp_seg_t *seg)
1987 {
1988 	sbdp_seg_t	**curpp, *curp;
1989 
1990 	curpp = &sys_seg;
1991 
1992 	while ((curp = *curpp) != NULL) {
1993 		if (curp == seg) {
1994 			*curpp = curp->next;
1995 			break;
1996 		}
1997 		curpp = &curp->next;
1998 	}
1999 
2000 	if (curp != NULL) {
2001 		kmem_free(curp, sizeof (sbdp_seg_t));
2002 		curp = NULL;
2003 	}
2004 }
2005 
2006 /*
2007  * remove this bank from its seg list
2008  */
2009 void
2010 sbdp_remove_bank_from_seg(sbdp_bank_t *bank)
2011 {
2012 	uint64_t	base;
2013 	sbdp_seg_t	*cur_seg;
2014 	sbdp_bank_t	**curpp, *curp;
2015 
2016 	/*
2017 	 * if we got an invalid bank just skip it
2018 	 */
2019 	if (bank == NULL || !bank->valid)
2020 		return;
2021 	base = bank->um & ~(bank->uk);
2022 
2023 	/*
2024 	 * If the bank doesn't belong to any seg just return
2025 	 */
2026 	if ((cur_seg = sbdp_get_seg(base)) == NULL) {
2027 		SBDP_DBG_MEM("bank %d with no segment\n", bank->id);
2028 		return;
2029 	}
2030 
2031 	/*
2032 	 * Find bank in the seg
2033 	 */
2034 	curpp = &cur_seg->banks;
2035 
2036 	while ((curp = *curpp) != NULL) {
2037 		if (curp->id == bank->id) {
2038 			/*
2039 			 * found node, remove it
2040 			 */
2041 			*curpp = curp->seg_next;
2042 			break;
2043 		}
2044 		curpp = &curp->seg_next;
2045 	}
2046 
2047 	if (curp != NULL) {
2048 		cur_seg->nbanks--;
2049 	}
2050 
2051 	if (cur_seg->nbanks == 0) {
2052 		/*
2053 		 * No banks left on this segment, remove the segment
2054 		 */
2055 		SBDP_DBG_MEM("No banks left in this segment, removing it\n");
2056 		sbdp_rm_seg(cur_seg);
2057 	}
2058 }
2059 
2060 sbdp_seg_t *
2061 sbdp_get_seg(uint64_t base)
2062 {
2063 	sbdp_seg_t	*cur_seg;
2064 
2065 	for (cur_seg = sys_seg; cur_seg; cur_seg = cur_seg->next) {
2066 		if (cur_seg-> base == base)
2067 			break;
2068 	}
2069 
2070 	return (cur_seg);
2071 }
2072 
2073 #ifdef DEBUG
2074 int
2075 sbdp_passthru_readmem(sbdp_handle_t *hp, void *arg)
2076 {
2077 	_NOTE(ARGUNUSED(hp))
2078 	_NOTE(ARGUNUSED(arg))
2079 
2080 	struct memlist	*ml;
2081 	uint64_t	src_pa;
2082 	uint64_t	dst_pa;
2083 	uint64_t	dst;
2084 
2085 
2086 	dst_pa = va_to_pa(&dst);
2087 
2088 	memlist_read_lock();
2089 	for (ml = phys_install; ml; ml = ml->ml_next) {
2090 		uint64_t	nbytes;
2091 
2092 		src_pa = ml->ml_address;
2093 		nbytes = ml->ml_size;
2094 
2095 		while (nbytes != 0ull) {
2096 
2097 			/* copy 32 bytes at src_pa to dst_pa */
2098 			bcopy32_il(src_pa, dst_pa);
2099 
2100 			/* increment by 32 bytes */
2101 			src_pa += (4 * sizeof (uint64_t));
2102 
2103 			/* decrement by 32 bytes */
2104 			nbytes -= (4 * sizeof (uint64_t));
2105 		}
2106 	}
2107 	memlist_read_unlock();
2108 
2109 	return (0);
2110 }
2111 
2112 static int
2113 isdigit(int ch)
2114 {
2115 	return (ch >= '0' && ch <= '9');
2116 }
2117 
2118 #define	isspace(c)	((c) == ' ' || (c) == '\t' || (c) == '\n')
2119 
2120 int
2121 sbdp_strtoi(char *p, char **pos)
2122 {
2123 	int n;
2124 	int c, neg = 0;
2125 
2126 	if (!isdigit(c = *p)) {
2127 		while (isspace(c))
2128 			c = *++p;
2129 		switch (c) {
2130 			case '-':
2131 				neg++;
2132 				/* FALLTHROUGH */
2133 			case '+':
2134 				c = *++p;
2135 		}
2136 		if (!isdigit(c)) {
2137 			if (pos != NULL)
2138 				*pos = p;
2139 			return (0);
2140 		}
2141 	}
2142 	for (n = '0' - c; isdigit(c = *++p); ) {
2143 		n *= 10; /* two steps to avoid unnecessary overflow */
2144 		n += '0' - c; /* accum neg to avoid surprises at MAX */
2145 	}
2146 	if (pos != NULL)
2147 		*pos = p;
2148 	return (neg ? n : -n);
2149 }
2150 
2151 int
2152 sbdp_passthru_prep_script(sbdp_handle_t *hp, void *arg)
2153 {
2154 	int			board, i;
2155 	sbdp_bd_t		*t_bdp, *s_bdp;
2156 	char			*opts;
2157 	int			t_board;
2158 	sbdp_rename_script_t	*rsbuffer;
2159 	sbdp_cr_handle_t	*cph;
2160 	int			scriptlen, size;
2161 
2162 	opts = (char *)arg;
2163 	board = hp->h_board;
2164 
2165 	opts += strlen("prep-script=");
2166 	t_board = sbdp_strtoi(opts, NULL);
2167 
2168 	cph =  kmem_zalloc(sizeof (sbdp_cr_handle_t), KM_SLEEP);
2169 
2170 	size = sizeof (sbdp_rename_script_t) * SBDP_RENAME_MAXOP;
2171 	rsbuffer = kmem_zalloc(size, KM_SLEEP);
2172 
2173 	s_bdp = sbdp_get_bd_info(hp->h_wnode, board);
2174 	t_bdp = sbdp_get_bd_info(hp->h_wnode, t_board);
2175 
2176 	cph->s_bdp = s_bdp;
2177 	cph->t_bdp = t_bdp;
2178 	cph->script = rsbuffer;
2179 
2180 	affinity_set(CPU_CURRENT);
2181 	scriptlen = sbdp_prep_rename_script(cph);
2182 
2183 	if (scriptlen <= 0) {
2184 		cmn_err(CE_WARN,
2185 		"sbdp failed to prep for copy-rename");
2186 	}
2187 	prom_printf("SCRIPT from board %d to board %d ->\n", board, t_board);
2188 	for (i = 0;  i < (scriptlen / (sizeof (sbdp_rename_script_t))); i++) {
2189 		prom_printf("0x%lx = 0x%lx, asi 0x%x\n",
2190 		    rsbuffer[i].masr_addr, rsbuffer[i].masr, rsbuffer[i].asi);
2191 	}
2192 	prom_printf("\n");
2193 
2194 	affinity_clear();
2195 	kmem_free(rsbuffer, size);
2196 	kmem_free(cph, sizeof (sbdp_cr_handle_t));
2197 
2198 	return (0);
2199 }
2200 #endif
2201