xref: /titanic_51/usr/src/uts/sun4u/cpu/opl_olympus.c (revision 853389e344087efe23a5cc688693e5301a1cb90d)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 /*
27  * Support for Olympus-C (SPARC64-VI) and Jupiter (SPARC64-VII).
28  */
29 
30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
31 
32 #include <sys/types.h>
33 #include <sys/systm.h>
34 #include <sys/ddi.h>
35 #include <sys/sysmacros.h>
36 #include <sys/archsystm.h>
37 #include <sys/vmsystm.h>
38 #include <sys/machparam.h>
39 #include <sys/machsystm.h>
40 #include <sys/machthread.h>
41 #include <sys/cpu.h>
42 #include <sys/cmp.h>
43 #include <sys/elf_SPARC.h>
44 #include <vm/vm_dep.h>
45 #include <vm/hat_sfmmu.h>
46 #include <vm/seg_kpm.h>
47 #include <vm/seg_kmem.h>
48 #include <sys/cpuvar.h>
49 #include <sys/opl_olympus_regs.h>
50 #include <sys/opl_module.h>
51 #include <sys/async.h>
52 #include <sys/cmn_err.h>
53 #include <sys/debug.h>
54 #include <sys/dditypes.h>
55 #include <sys/cpu_module.h>
56 #include <sys/sysmacros.h>
57 #include <sys/intreg.h>
58 #include <sys/clock.h>
59 #include <sys/platform_module.h>
60 #include <sys/ontrap.h>
61 #include <sys/panic.h>
62 #include <sys/memlist.h>
63 #include <sys/ndifm.h>
64 #include <sys/ddifm.h>
65 #include <sys/fm/protocol.h>
66 #include <sys/fm/util.h>
67 #include <sys/fm/cpu/SPARC64-VI.h>
68 #include <sys/dtrace.h>
69 #include <sys/watchpoint.h>
70 #include <sys/promif.h>
71 
72 /*
73  * Internal functions.
74  */
75 static int cpu_sync_log_err(void *flt);
76 static void cpu_payload_add_aflt(struct async_flt *, nvlist_t *, nvlist_t *);
77 static void opl_cpu_sync_error(struct regs *, ulong_t, ulong_t, uint_t, uint_t);
78 static int  cpu_flt_in_memory(opl_async_flt_t *, uint64_t);
79 static int prom_SPARC64VII_support_enabled(void);
80 static void opl_ta3();
81 static int plat_prom_preserve_kctx_is_supported(void);
82 
83 /*
84  * Error counters resetting interval.
85  */
86 static int opl_async_check_interval = 60;		/* 1 min */
87 
88 uint_t cpu_impl_dual_pgsz = 1;
89 
90 /*
91  * PA[22:0] represent Displacement in Jupiter
92  * configuration space.
93  */
94 uint_t	root_phys_addr_lo_mask = 0x7fffffu;
95 
96 /*
97  * set in /etc/system to control logging of user BERR/TO's
98  */
99 int cpu_berr_to_verbose = 0;
100 
101 /*
102  * Set to 1 if booted with all Jupiter cpus (all-Jupiter features enabled).
103  */
104 int cpu_alljupiter = 0;
105 
106 /*
107  * The sfmmu_cext field to be used by processes in a shared context domain.
108  */
109 static uchar_t shctx_cext = TAGACCEXT_MKSZPAIR(DEFAULT_ISM_PAGESZC, TTE8K);
110 
111 static int min_ecache_size;
112 static uint_t priv_hcl_1;
113 static uint_t priv_hcl_2;
114 static uint_t priv_hcl_4;
115 static uint_t priv_hcl_8;
116 
117 /*
118  * Olympus error log
119  */
120 static opl_errlog_t	*opl_err_log;
121 static int		opl_cpu0_log_setup;
122 
123 /*
124  * OPL ta 3 save area.
125  */
126 char	*opl_ta3_save;
127 
128 /*
129  * UE is classified into four classes (MEM, CHANNEL, CPU, PATH).
130  * No any other ecc_type_info insertion is allowed in between the following
131  * four UE classess.
132  */
133 ecc_type_to_info_t ecc_type_to_info[] = {
134 	SFSR_UE,	"UE ",	(OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_UE,
135 	"Uncorrectable ECC",  FM_EREPORT_PAYLOAD_SYNC,
136 	FM_EREPORT_CPU_UE_MEM,
137 	SFSR_UE,	"UE ",	(OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_UE,
138 	"Uncorrectable ECC",  FM_EREPORT_PAYLOAD_SYNC,
139 	FM_EREPORT_CPU_UE_CHANNEL,
140 	SFSR_UE,	"UE ",	(OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_UE,
141 	"Uncorrectable ECC",  FM_EREPORT_PAYLOAD_SYNC,
142 	FM_EREPORT_CPU_UE_CPU,
143 	SFSR_UE,	"UE ",	(OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_UE,
144 	"Uncorrectable ECC",  FM_EREPORT_PAYLOAD_SYNC,
145 	FM_EREPORT_CPU_UE_PATH,
146 	SFSR_BERR, "BERR ", (OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_OTHERS,
147 	"Bus Error",  FM_EREPORT_PAYLOAD_SYNC,
148 	FM_EREPORT_CPU_BERR,
149 	SFSR_TO, "TO ", (OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_OTHERS,
150 	"Bus Timeout",  FM_EREPORT_PAYLOAD_SYNC,
151 	FM_EREPORT_CPU_BTO,
152 	SFSR_TLB_MUL, "TLB_MUL ", (OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_OTHERS,
153 	"TLB MultiHit",  FM_EREPORT_PAYLOAD_SYNC,
154 	FM_EREPORT_CPU_MTLB,
155 	SFSR_TLB_PRT, "TLB_PRT ", (OPL_ECC_SYNC_TRAP), OPL_CPU_SYNC_OTHERS,
156 	"TLB Parity",  FM_EREPORT_PAYLOAD_SYNC,
157 	FM_EREPORT_CPU_TLBP,
158 
159 	UGESR_IAUG_CRE, "IAUG_CRE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
160 	"IAUG CRE",  FM_EREPORT_PAYLOAD_URGENT,
161 	FM_EREPORT_CPU_CRE,
162 	UGESR_IAUG_TSBCTXT, "IAUG_TSBCTXT",
163 	OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
164 	"IAUG TSBCTXT",  FM_EREPORT_PAYLOAD_URGENT,
165 	FM_EREPORT_CPU_TSBCTX,
166 	UGESR_IUG_TSBP, "IUG_TSBP", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
167 	"IUG TSBP",  FM_EREPORT_PAYLOAD_URGENT,
168 	FM_EREPORT_CPU_TSBP,
169 	UGESR_IUG_PSTATE, "IUG_PSTATE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
170 	"IUG PSTATE",  FM_EREPORT_PAYLOAD_URGENT,
171 	FM_EREPORT_CPU_PSTATE,
172 	UGESR_IUG_TSTATE, "IUG_TSTATE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
173 	"IUG TSTATE",  FM_EREPORT_PAYLOAD_URGENT,
174 	FM_EREPORT_CPU_TSTATE,
175 	UGESR_IUG_F, "IUG_F", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
176 	"IUG FREG",  FM_EREPORT_PAYLOAD_URGENT,
177 	FM_EREPORT_CPU_IUG_F,
178 	UGESR_IUG_R, "IUG_R", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
179 	"IUG RREG",  FM_EREPORT_PAYLOAD_URGENT,
180 	FM_EREPORT_CPU_IUG_R,
181 	UGESR_AUG_SDC, "AUG_SDC", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
182 	"AUG SDC",  FM_EREPORT_PAYLOAD_URGENT,
183 	FM_EREPORT_CPU_SDC,
184 	UGESR_IUG_WDT, "IUG_WDT", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
185 	"IUG WDT",  FM_EREPORT_PAYLOAD_URGENT,
186 	FM_EREPORT_CPU_WDT,
187 	UGESR_IUG_DTLB, "IUG_DTLB", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
188 	"IUG DTLB",  FM_EREPORT_PAYLOAD_URGENT,
189 	FM_EREPORT_CPU_DTLB,
190 	UGESR_IUG_ITLB, "IUG_ITLB", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
191 	"IUG ITLB",  FM_EREPORT_PAYLOAD_URGENT,
192 	FM_EREPORT_CPU_ITLB,
193 	UGESR_IUG_COREERR, "IUG_COREERR",
194 	OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
195 	"IUG COREERR",  FM_EREPORT_PAYLOAD_URGENT,
196 	FM_EREPORT_CPU_CORE,
197 	UGESR_MULTI_DAE, "MULTI_DAE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
198 	"MULTI DAE",  FM_EREPORT_PAYLOAD_URGENT,
199 	FM_EREPORT_CPU_DAE,
200 	UGESR_MULTI_IAE, "MULTI_IAE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
201 	"MULTI IAE",  FM_EREPORT_PAYLOAD_URGENT,
202 	FM_EREPORT_CPU_IAE,
203 	UGESR_MULTI_UGE, "MULTI_UGE", OPL_ECC_URGENT_TRAP, OPL_CPU_URGENT,
204 	"MULTI UGE",  FM_EREPORT_PAYLOAD_URGENT,
205 	FM_EREPORT_CPU_UGE,
206 	0,		NULL,		0,		0,
207 	NULL,  0,	   0,
208 };
209 
210 int (*p2get_mem_info)(int synd_code, uint64_t paddr,
211 		uint64_t *mem_sizep, uint64_t *seg_sizep, uint64_t *bank_sizep,
212 		int *segsp, int *banksp, int *mcidp);
213 
214 
215 /*
216  * Setup trap handlers for 0xA, 0x32, 0x40 trap types
217  * and "ta 3" and "ta 4".
218  */
219 void
220 cpu_init_trap(void)
221 {
222 	OPL_SET_TRAP(tt0_iae, opl_serr_instr);
223 	OPL_SET_TRAP(tt1_iae, opl_serr_instr);
224 	OPL_SET_TRAP(tt0_dae, opl_serr_instr);
225 	OPL_SET_TRAP(tt1_dae, opl_serr_instr);
226 	OPL_SET_TRAP(tt0_asdat, opl_ugerr_instr);
227 	OPL_SET_TRAP(tt1_asdat, opl_ugerr_instr);
228 	OPL_SET_TRAP(tt0_flushw, opl_ta3_instr);
229 	OPL_PATCH_28(opl_cleanw_patch, opl_ta4_instr);
230 }
231 
232 static int
233 getintprop(pnode_t node, char *name, int deflt)
234 {
235 	int	value;
236 
237 	switch (prom_getproplen(node, name)) {
238 	case sizeof (int):
239 		(void) prom_getprop(node, name, (caddr_t)&value);
240 		break;
241 
242 	default:
243 		value = deflt;
244 		break;
245 	}
246 
247 	return (value);
248 }
249 
250 /*
251  * Set the magic constants of the implementation.
252  */
253 /*ARGSUSED*/
254 void
255 cpu_fiximp(pnode_t dnode)
256 {
257 	int i, a;
258 	extern int vac_size, vac_shift;
259 	extern uint_t vac_mask;
260 
261 	static struct {
262 		char	*name;
263 		int	*var;
264 		int	defval;
265 	} prop[] = {
266 		"l1-dcache-size", &dcache_size, OPL_DCACHE_SIZE,
267 		"l1-dcache-line-size", &dcache_linesize, OPL_DCACHE_LSIZE,
268 		"l1-icache-size", &icache_size, OPL_ICACHE_SIZE,
269 		"l1-icache-line-size", &icache_linesize, OPL_ICACHE_LSIZE,
270 		"l2-cache-size", &ecache_size, OPL_ECACHE_SIZE,
271 		"l2-cache-line-size", &ecache_alignsize, OPL_ECACHE_LSIZE,
272 		"l2-cache-associativity", &ecache_associativity, OPL_ECACHE_NWAY
273 	};
274 
275 	for (i = 0; i < sizeof (prop) / sizeof (prop[0]); i++)
276 		*prop[i].var = getintprop(dnode, prop[i].name, prop[i].defval);
277 
278 	ecache_setsize = ecache_size / ecache_associativity;
279 
280 	vac_size = OPL_VAC_SIZE;
281 	vac_mask = MMU_PAGEMASK & (vac_size - 1);
282 	i = 0; a = vac_size;
283 	while (a >>= 1)
284 		++i;
285 	vac_shift = i;
286 	shm_alignment = vac_size;
287 	vac = 1;
288 }
289 
290 /*
291  * Enable features for Jupiter-only domains.
292  */
293 void
294 cpu_fix_alljupiter(void)
295 {
296 	if (!prom_SPARC64VII_support_enabled()) {
297 		/*
298 		 * Do not enable all-Jupiter features and do not turn on
299 		 * the cpu_alljupiter flag.
300 		 */
301 		return;
302 	}
303 
304 	cpu_alljupiter = 1;
305 
306 	/*
307 	 * Enable ima hwcap for Jupiter-only domains.  DR will prevent
308 	 * addition of Olympus-C to all-Jupiter domains to preserve ima
309 	 * hwcap semantics.
310 	 */
311 	cpu_hwcap_flags |= AV_SPARC_IMA;
312 
313 	/*
314 	 * Enable shared context support.
315 	 */
316 	shctx_on = 1;
317 }
318 
319 #ifdef	OLYMPUS_C_REV_B_ERRATA_XCALL
320 /*
321  * Quick and dirty way to redefine locally in
322  * OPL the value of IDSR_BN_SETS to 31 instead
323  * of the standard 32 value. This is to workaround
324  * REV_B of Olympus_c processor's problem in handling
325  * more than 31 xcall broadcast.
326  */
327 #undef	IDSR_BN_SETS
328 #define	IDSR_BN_SETS    31
329 #endif	/* OLYMPUS_C_REV_B_ERRATA_XCALL */
330 
331 void
332 send_mondo_set(cpuset_t set)
333 {
334 	int lo, busy, nack, shipped = 0;
335 	uint16_t i, cpuids[IDSR_BN_SETS];
336 	uint64_t idsr, nackmask = 0, busymask, curnack, curbusy;
337 	uint64_t starttick, endtick, tick, lasttick;
338 #if (NCPU > IDSR_BN_SETS)
339 	int index = 0;
340 	int ncpuids = 0;
341 #endif
342 #ifdef	OLYMPUS_C_REV_A_ERRATA_XCALL
343 	int bn_sets = IDSR_BN_SETS;
344 	uint64_t ver;
345 
346 	ASSERT(NCPU > bn_sets);
347 #endif
348 
349 	ASSERT(!CPUSET_ISNULL(set));
350 	starttick = lasttick = gettick();
351 
352 #ifdef	OLYMPUS_C_REV_A_ERRATA_XCALL
353 	ver = ultra_getver();
354 	if (((ULTRA_VER_IMPL(ver)) == OLYMPUS_C_IMPL) &&
355 	    ((OLYMPUS_REV_MASK(ver)) == OLYMPUS_C_A))
356 		bn_sets = 1;
357 #endif
358 
359 #if (NCPU <= IDSR_BN_SETS)
360 	for (i = 0; i < NCPU; i++)
361 		if (CPU_IN_SET(set, i)) {
362 			shipit(i, shipped);
363 			nackmask |= IDSR_NACK_BIT(shipped);
364 			cpuids[shipped++] = i;
365 			CPUSET_DEL(set, i);
366 			if (CPUSET_ISNULL(set))
367 				break;
368 		}
369 	CPU_STATS_ADDQ(CPU, sys, xcalls, shipped);
370 #else
371 	for (i = 0; i < NCPU; i++)
372 		if (CPU_IN_SET(set, i)) {
373 			ncpuids++;
374 
375 			/*
376 			 * Ship only to the first (IDSR_BN_SETS) CPUs.  If we
377 			 * find we have shipped to more than (IDSR_BN_SETS)
378 			 * CPUs, set "index" to the highest numbered CPU in
379 			 * the set so we can ship to other CPUs a bit later on.
380 			 */
381 #ifdef	OLYMPUS_C_REV_A_ERRATA_XCALL
382 			if (shipped < bn_sets) {
383 #else
384 			if (shipped < IDSR_BN_SETS) {
385 #endif
386 				shipit(i, shipped);
387 				nackmask |= IDSR_NACK_BIT(shipped);
388 				cpuids[shipped++] = i;
389 				CPUSET_DEL(set, i);
390 				if (CPUSET_ISNULL(set))
391 					break;
392 			} else
393 				index = (int)i;
394 		}
395 
396 	CPU_STATS_ADDQ(CPU, sys, xcalls, ncpuids);
397 #endif
398 
399 	busymask = IDSR_NACK_TO_BUSY(nackmask);
400 	busy = nack = 0;
401 	endtick = starttick + xc_tick_limit;
402 	for (;;) {
403 		idsr = getidsr();
404 #if (NCPU <= IDSR_BN_SETS)
405 		if (idsr == 0)
406 			break;
407 #else
408 		if (idsr == 0 && shipped == ncpuids)
409 			break;
410 #endif
411 		tick = gettick();
412 		/*
413 		 * If there is a big jump between the current tick
414 		 * count and lasttick, we have probably hit a break
415 		 * point.  Adjust endtick accordingly to avoid panic.
416 		 */
417 		if (tick > (lasttick + xc_tick_jump_limit))
418 			endtick += (tick - lasttick);
419 		lasttick = tick;
420 		if (tick > endtick) {
421 			if (panic_quiesce)
422 				return;
423 			cmn_err(CE_CONT, "send mondo timeout [%d NACK %d "
424 			    "BUSY]\nIDSR 0x%" PRIx64 "  cpuids:",
425 			    nack, busy, idsr);
426 #ifdef	OLYMPUS_C_REV_A_ERRATA_XCALL
427 			for (i = 0; i < bn_sets; i++) {
428 #else
429 			for (i = 0; i < IDSR_BN_SETS; i++) {
430 #endif
431 				if (idsr & (IDSR_NACK_BIT(i) |
432 				    IDSR_BUSY_BIT(i))) {
433 					cmn_err(CE_CONT, " 0x%x", cpuids[i]);
434 				}
435 			}
436 			cmn_err(CE_CONT, "\n");
437 			cmn_err(CE_PANIC, "send_mondo_set: timeout");
438 		}
439 		curnack = idsr & nackmask;
440 		curbusy = idsr & busymask;
441 
442 #ifdef OLYMPUS_C_REV_B_ERRATA_XCALL
443 		/*
444 		 * Only proceed to send more xcalls if all the
445 		 * cpus in the previous IDSR_BN_SETS were completed.
446 		 */
447 		if (curbusy) {
448 			busy++;
449 			continue;
450 		}
451 #endif /* OLYMPUS_C_REV_B_ERRATA_XCALL */
452 
453 #if (NCPU > IDSR_BN_SETS)
454 		if (shipped < ncpuids) {
455 			uint64_t cpus_left;
456 			uint16_t next = (uint16_t)index;
457 
458 			cpus_left = ~(IDSR_NACK_TO_BUSY(curnack) | curbusy) &
459 			    busymask;
460 
461 			if (cpus_left) {
462 				do {
463 					/*
464 					 * Sequence through and ship to the
465 					 * remainder of the CPUs in the system
466 					 * (e.g. other than the first
467 					 * (IDSR_BN_SETS)) in reverse order.
468 					 */
469 					lo = lowbit(cpus_left) - 1;
470 					i = IDSR_BUSY_IDX(lo);
471 					shipit(next, i);
472 					shipped++;
473 					cpuids[i] = next;
474 
475 					/*
476 					 * If we've processed all the CPUs,
477 					 * exit the loop now and save
478 					 * instructions.
479 					 */
480 					if (shipped == ncpuids)
481 						break;
482 
483 					for ((index = ((int)next - 1));
484 					    index >= 0; index--)
485 						if (CPU_IN_SET(set, index)) {
486 							next = (uint16_t)index;
487 							break;
488 						}
489 
490 					cpus_left &= ~(1ull << lo);
491 				} while (cpus_left);
492 				continue;
493 			}
494 		}
495 #endif
496 #ifndef	OLYMPUS_C_REV_B_ERRATA_XCALL
497 		if (curbusy) {
498 			busy++;
499 			continue;
500 		}
501 #endif	/* OLYMPUS_C_REV_B_ERRATA_XCALL */
502 #ifdef SEND_MONDO_STATS
503 		{
504 			int n = gettick() - starttick;
505 			if (n < 8192)
506 				x_nack_stimes[n >> 7]++;
507 		}
508 #endif
509 		while (gettick() < (tick + sys_clock_mhz))
510 			;
511 		do {
512 			lo = lowbit(curnack) - 1;
513 			i = IDSR_NACK_IDX(lo);
514 			shipit(cpuids[i], i);
515 			curnack &= ~(1ull << lo);
516 		} while (curnack);
517 		nack++;
518 		busy = 0;
519 	}
520 #ifdef SEND_MONDO_STATS
521 	{
522 		int n = gettick() - starttick;
523 		if (n < 8192)
524 			x_set_stimes[n >> 7]++;
525 		else
526 			x_set_ltimes[(n >> 13) & 0xf]++;
527 	}
528 	x_set_cpus[shipped]++;
529 #endif
530 }
531 
532 /*
533  * Cpu private initialization.
534  */
535 void
536 cpu_init_private(struct cpu *cp)
537 {
538 	if (!((IS_OLYMPUS_C(cpunodes[cp->cpu_id].implementation)) ||
539 	    (IS_JUPITER(cpunodes[cp->cpu_id].implementation)))) {
540 		cmn_err(CE_PANIC, "CPU%d Impl %d: Only SPARC64-VI(I) is "
541 		    "supported", cp->cpu_id,
542 		    cpunodes[cp->cpu_id].implementation);
543 	}
544 
545 	adjust_hw_copy_limits(cpunodes[cp->cpu_id].ecache_size);
546 }
547 
548 void
549 cpu_setup(void)
550 {
551 	extern int at_flags;
552 	extern int cpc_has_overflow_intr;
553 	uint64_t cpu0_log;
554 	extern	 uint64_t opl_cpu0_err_log;
555 
556 	/*
557 	 * Initialize Error log Scratch register for error handling.
558 	 */
559 
560 	cpu0_log = va_to_pa(&opl_cpu0_err_log);
561 	opl_error_setup(cpu0_log);
562 	opl_cpu0_log_setup = 1;
563 
564 	/*
565 	 * Enable MMU translating multiple page sizes for
566 	 * sITLB and sDTLB.
567 	 */
568 	opl_mpg_enable();
569 
570 	/*
571 	 * Setup chip-specific trap handlers.
572 	 */
573 	cpu_init_trap();
574 
575 	cache |= (CACHE_VAC | CACHE_PTAG | CACHE_IOCOHERENT);
576 
577 	at_flags = EF_SPARC_32PLUS | EF_SPARC_SUN_US1 | EF_SPARC_SUN_US3;
578 
579 	/*
580 	 * Due to the number of entries in the fully-associative tlb
581 	 * this may have to be tuned lower than in spitfire.
582 	 */
583 	pp_slots = MIN(8, MAXPP_SLOTS);
584 
585 	/*
586 	 * Block stores do not invalidate all pages of the d$, pagecopy
587 	 * et. al. need virtual translations with virtual coloring taken
588 	 * into consideration.  prefetch/ldd will pollute the d$ on the
589 	 * load side.
590 	 */
591 	pp_consistent_coloring = PPAGE_STORE_VCOLORING | PPAGE_LOADS_POLLUTE;
592 
593 	if (use_page_coloring) {
594 		do_pg_coloring = 1;
595 	}
596 
597 	isa_list =
598 	    "sparcv9+vis2 sparcv9+vis sparcv9 "
599 	    "sparcv8plus+vis2 sparcv8plus+vis sparcv8plus "
600 	    "sparcv8 sparcv8-fsmuld sparcv7 sparc";
601 
602 	cpu_hwcap_flags = AV_SPARC_VIS | AV_SPARC_VIS2 |
603 	    AV_SPARC_POPC | AV_SPARC_FMAF;
604 
605 	/*
606 	 * On SPARC64-VI, there's no hole in the virtual address space
607 	 */
608 	hole_start = hole_end = 0;
609 
610 	/*
611 	 * The kpm mapping window.
612 	 * kpm_size:
613 	 *	The size of a single kpm range.
614 	 *	The overall size will be: kpm_size * vac_colors.
615 	 * kpm_vbase:
616 	 *	The virtual start address of the kpm range within the kernel
617 	 *	virtual address space. kpm_vbase has to be kpm_size aligned.
618 	 */
619 	kpm_size = (size_t)(128ull * 1024 * 1024 * 1024 * 1024); /* 128TB */
620 	kpm_size_shift = 47;
621 	kpm_vbase = (caddr_t)0x8000000000000000ull; /* 8EB */
622 	kpm_smallpages = 1;
623 
624 	/*
625 	 * The traptrace code uses either %tick or %stick for
626 	 * timestamping.  We have %stick so we can use it.
627 	 */
628 	traptrace_use_stick = 1;
629 
630 	/*
631 	 * SPARC64-VI has a performance counter overflow interrupt
632 	 */
633 	cpc_has_overflow_intr = 1;
634 
635 	/*
636 	 * Declare that this architecture/cpu combination does not support
637 	 * fpRAS.
638 	 */
639 	fpras_implemented = 0;
640 }
641 
642 /*
643  * Called by setcpudelay
644  */
645 void
646 cpu_init_tick_freq(void)
647 {
648 	/*
649 	 * For SPARC64-VI we want to use the system clock rate as
650 	 * the basis for low level timing, due to support of mixed
651 	 * speed CPUs and power managment.
652 	 */
653 	if (system_clock_freq == 0)
654 		cmn_err(CE_PANIC, "setcpudelay: invalid system_clock_freq");
655 
656 	sys_tick_freq = system_clock_freq;
657 }
658 
659 #ifdef SEND_MONDO_STATS
660 uint32_t x_one_stimes[64];
661 uint32_t x_one_ltimes[16];
662 uint32_t x_set_stimes[64];
663 uint32_t x_set_ltimes[16];
664 uint32_t x_set_cpus[NCPU];
665 uint32_t x_nack_stimes[64];
666 #endif
667 
668 /*
669  * Note: A version of this function is used by the debugger via the KDI,
670  * and must be kept in sync with this version.  Any changes made to this
671  * function to support new chips or to accomodate errata must also be included
672  * in the KDI-specific version.  See us3_kdi.c.
673  */
674 void
675 send_one_mondo(int cpuid)
676 {
677 	int busy, nack;
678 	uint64_t idsr, starttick, endtick, tick, lasttick;
679 	uint64_t busymask;
680 
681 	CPU_STATS_ADDQ(CPU, sys, xcalls, 1);
682 	starttick = lasttick = gettick();
683 	shipit(cpuid, 0);
684 	endtick = starttick + xc_tick_limit;
685 	busy = nack = 0;
686 	busymask = IDSR_BUSY;
687 	for (;;) {
688 		idsr = getidsr();
689 		if (idsr == 0)
690 			break;
691 
692 		tick = gettick();
693 		/*
694 		 * If there is a big jump between the current tick
695 		 * count and lasttick, we have probably hit a break
696 		 * point.  Adjust endtick accordingly to avoid panic.
697 		 */
698 		if (tick > (lasttick + xc_tick_jump_limit))
699 			endtick += (tick - lasttick);
700 		lasttick = tick;
701 		if (tick > endtick) {
702 			if (panic_quiesce)
703 				return;
704 			cmn_err(CE_PANIC, "send mondo timeout (target 0x%x) "
705 			    "[%d NACK %d BUSY]", cpuid, nack, busy);
706 		}
707 
708 		if (idsr & busymask) {
709 			busy++;
710 			continue;
711 		}
712 		drv_usecwait(1);
713 		shipit(cpuid, 0);
714 		nack++;
715 		busy = 0;
716 	}
717 #ifdef SEND_MONDO_STATS
718 	{
719 		int n = gettick() - starttick;
720 		if (n < 8192)
721 			x_one_stimes[n >> 7]++;
722 		else
723 			x_one_ltimes[(n >> 13) & 0xf]++;
724 	}
725 #endif
726 }
727 
728 /*
729  * init_mmu_page_sizes is set to one after the bootup time initialization
730  * via mmu_init_mmu_page_sizes, to indicate that mmu_page_sizes has a
731  * valid value.
732  *
733  * mmu_disable_ism_large_pages and mmu_disable_large_pages are the mmu-specific
734  * versions of disable_ism_large_pages and disable_large_pages, and feed back
735  * into those two hat variables at hat initialization time.
736  *
737  */
738 int init_mmu_page_sizes = 0;
739 
740 static uint_t mmu_disable_large_pages = 0;
741 static uint_t mmu_disable_ism_large_pages = ((1 << TTE64K) |
742 	(1 << TTE512K) | (1 << TTE32M) | (1 << TTE256M));
743 static uint_t mmu_disable_auto_data_large_pages = ((1 << TTE64K) |
744 	(1 << TTE512K) | (1 << TTE32M) | (1 << TTE256M));
745 static uint_t mmu_disable_auto_text_large_pages = ((1 << TTE64K) |
746 	(1 << TTE512K));
747 
748 /*
749  * Re-initialize mmu_page_sizes and friends, for SPARC64-VI mmu support.
750  * Called during very early bootup from check_cpus_set().
751  * Can be called to verify that mmu_page_sizes are set up correctly.
752  *
753  * Set Olympus defaults. We do not use the function parameter.
754  */
755 /*ARGSUSED*/
756 int
757 mmu_init_mmu_page_sizes(int32_t not_used)
758 {
759 	if (!init_mmu_page_sizes) {
760 		mmu_page_sizes = MMU_PAGE_SIZES;
761 		mmu_hashcnt = MAX_HASHCNT;
762 		mmu_ism_pagesize = DEFAULT_ISM_PAGESIZE;
763 		mmu_exported_pagesize_mask = (1 << TTE8K) |
764 		    (1 << TTE64K) | (1 << TTE512K) | (1 << TTE4M) |
765 		    (1 << TTE32M) | (1 << TTE256M);
766 		init_mmu_page_sizes = 1;
767 		return (0);
768 	}
769 	return (1);
770 }
771 
772 /* SPARC64-VI worst case DTLB parameters */
773 #ifndef	LOCKED_DTLB_ENTRIES
774 #define	LOCKED_DTLB_ENTRIES	5	/* 2 user TSBs, 2 nucleus, + OBP */
775 #endif
776 #define	TOTAL_DTLB_ENTRIES	32
777 #define	AVAIL_32M_ENTRIES	0
778 #define	AVAIL_256M_ENTRIES	0
779 #define	AVAIL_DTLB_ENTRIES	(TOTAL_DTLB_ENTRIES - LOCKED_DTLB_ENTRIES)
780 static uint64_t ttecnt_threshold[MMU_PAGE_SIZES] = {
781 	AVAIL_DTLB_ENTRIES, AVAIL_DTLB_ENTRIES,
782 	AVAIL_DTLB_ENTRIES, AVAIL_DTLB_ENTRIES,
783 	AVAIL_DTLB_ENTRIES, AVAIL_DTLB_ENTRIES};
784 
785 /*
786  * The function returns the mmu-specific values for the
787  * hat's disable_large_pages, disable_ism_large_pages, and
788  * disable_auto_data_large_pages and
789  * disable_text_data_large_pages variables.
790  */
791 uint_t
792 mmu_large_pages_disabled(uint_t flag)
793 {
794 	uint_t pages_disable = 0;
795 	extern int use_text_pgsz64K;
796 	extern int use_text_pgsz512K;
797 
798 	if (flag == HAT_LOAD) {
799 		pages_disable =  mmu_disable_large_pages;
800 	} else if (flag == HAT_LOAD_SHARE) {
801 		pages_disable = mmu_disable_ism_large_pages;
802 	} else if (flag == HAT_AUTO_DATA) {
803 		pages_disable = mmu_disable_auto_data_large_pages;
804 	} else if (flag == HAT_AUTO_TEXT) {
805 		pages_disable = mmu_disable_auto_text_large_pages;
806 		if (use_text_pgsz512K) {
807 			pages_disable &= ~(1 << TTE512K);
808 		}
809 		if (use_text_pgsz64K) {
810 			pages_disable &= ~(1 << TTE64K);
811 		}
812 	}
813 	return (pages_disable);
814 }
815 
816 /*
817  * mmu_init_large_pages is called with the desired ism_pagesize parameter.
818  * It may be called from set_platform_defaults, if some value other than 4M
819  * is desired.  mmu_ism_pagesize is the tunable.  If it has a bad value,
820  * then only warn, since it would be bad form to panic due to a user typo.
821  *
822  * The function re-initializes the mmu_disable_ism_large_pages variable.
823  */
824 void
825 mmu_init_large_pages(size_t ism_pagesize)
826 {
827 
828 	switch (ism_pagesize) {
829 	case MMU_PAGESIZE4M:
830 		mmu_disable_ism_large_pages = ((1 << TTE64K) |
831 		    (1 << TTE512K) | (1 << TTE32M) | (1 << TTE256M));
832 		mmu_disable_auto_data_large_pages = ((1 << TTE64K) |
833 		    (1 << TTE512K) | (1 << TTE32M) | (1 << TTE256M));
834 		shctx_cext = TAGACCEXT_MKSZPAIR(TTE4M, TTE8K);
835 		break;
836 	case MMU_PAGESIZE32M:
837 		mmu_disable_ism_large_pages = ((1 << TTE64K) |
838 		    (1 << TTE512K) | (1 << TTE256M));
839 		mmu_disable_auto_data_large_pages = ((1 << TTE64K) |
840 		    (1 << TTE512K) | (1 << TTE4M) | (1 << TTE256M));
841 		adjust_data_maxlpsize(ism_pagesize);
842 		shctx_cext = TAGACCEXT_MKSZPAIR(TTE32M, TTE8K);
843 		break;
844 	case MMU_PAGESIZE256M:
845 		mmu_disable_ism_large_pages = ((1 << TTE64K) |
846 		    (1 << TTE512K) | (1 << TTE32M));
847 		mmu_disable_auto_data_large_pages = ((1 << TTE64K) |
848 		    (1 << TTE512K) | (1 << TTE4M) | (1 << TTE32M));
849 		adjust_data_maxlpsize(ism_pagesize);
850 		shctx_cext = TAGACCEXT_MKSZPAIR(TTE256M, TTE8K);
851 		break;
852 	default:
853 		cmn_err(CE_WARN, "Unrecognized mmu_ism_pagesize value 0x%lx",
854 		    ism_pagesize);
855 		break;
856 	}
857 }
858 
859 /*
860  * Function to reprogram the TLBs when page sizes used
861  * by a process change significantly.
862  */
863 static void
864 mmu_setup_page_sizes(struct hat *hat, uint64_t *ttecnt, uint8_t *tmp_pgsz)
865 {
866 	uint8_t pgsz0, pgsz1;
867 
868 	/*
869 	 * Don't program 2nd dtlb for kernel and ism hat
870 	 */
871 	ASSERT(hat->sfmmu_ismhat == NULL);
872 	ASSERT(hat != ksfmmup);
873 
874 	/*
875 	 * hat->sfmmu_pgsz[] is an array whose elements
876 	 * contain a sorted order of page sizes.  Element
877 	 * 0 is the most commonly used page size, followed
878 	 * by element 1, and so on.
879 	 *
880 	 * ttecnt[] is an array of per-page-size page counts
881 	 * mapped into the process.
882 	 *
883 	 * If the HAT's choice for page sizes is unsuitable,
884 	 * we can override it here.  The new values written
885 	 * to the array will be handed back to us later to
886 	 * do the actual programming of the TLB hardware.
887 	 *
888 	 */
889 	pgsz0 = (uint8_t)MIN(tmp_pgsz[0], tmp_pgsz[1]);
890 	pgsz1 = (uint8_t)MAX(tmp_pgsz[0], tmp_pgsz[1]);
891 
892 	/*
893 	 * This implements PAGESIZE programming of the sTLB
894 	 * if large TTE counts don't exceed the thresholds.
895 	 */
896 	if (ttecnt[pgsz0] < ttecnt_threshold[pgsz0])
897 		pgsz0 = page_szc(MMU_PAGESIZE);
898 	if (ttecnt[pgsz1] < ttecnt_threshold[pgsz1])
899 		pgsz1 = page_szc(MMU_PAGESIZE);
900 	tmp_pgsz[0] = pgsz0;
901 	tmp_pgsz[1] = pgsz1;
902 	/* otherwise, accept what the HAT chose for us */
903 }
904 
905 /*
906  * The HAT calls this function when an MMU context is allocated so that we
907  * can reprogram the large TLBs appropriately for the new process using
908  * the context.
909  *
910  * The caller must hold the HAT lock.
911  */
912 void
913 mmu_set_ctx_page_sizes(struct hat *hat)
914 {
915 	uint8_t pgsz0, pgsz1;
916 	uint8_t new_cext;
917 
918 	ASSERT(sfmmu_hat_lock_held(hat));
919 	/*
920 	 * Don't program 2nd dtlb for kernel and ism hat
921 	 */
922 	if (hat->sfmmu_ismhat || hat == ksfmmup)
923 		return;
924 
925 	/*
926 	 * If supported, reprogram the TLBs to a larger pagesize.
927 	 */
928 	if (hat->sfmmu_scdp != NULL) {
929 		new_cext = shctx_cext;
930 	} else {
931 		pgsz0 = hat->sfmmu_pgsz[0];
932 		pgsz1 = hat->sfmmu_pgsz[1];
933 		ASSERT(pgsz0 < mmu_page_sizes);
934 		ASSERT(pgsz1 < mmu_page_sizes);
935 		new_cext = TAGACCEXT_MKSZPAIR(pgsz1, pgsz0);
936 	}
937 	if (hat->sfmmu_cext != new_cext) {
938 #ifdef DEBUG
939 		int i;
940 		/*
941 		 * assert cnum should be invalid, this is because pagesize
942 		 * can only be changed after a proc's ctxs are invalidated.
943 		 */
944 		for (i = 0; i < max_mmu_ctxdoms; i++) {
945 			ASSERT(hat->sfmmu_ctxs[i].cnum == INVALID_CONTEXT);
946 		}
947 #endif /* DEBUG */
948 		hat->sfmmu_cext = new_cext;
949 	}
950 	/*
951 	 * sfmmu_setctx_sec() will take care of the
952 	 * rest of the dirty work for us.
953 	 */
954 }
955 
956 /*
957  * This function assumes that there are either four or six supported page
958  * sizes and at most two programmable TLBs, so we need to decide which
959  * page sizes are most important and then adjust the TLB page sizes
960  * accordingly (if supported).
961  *
962  * If these assumptions change, this function will need to be
963  * updated to support whatever the new limits are.
964  */
965 void
966 mmu_check_page_sizes(sfmmu_t *sfmmup, uint64_t *ttecnt)
967 {
968 	uint64_t sortcnt[MMU_PAGE_SIZES];
969 	uint8_t tmp_pgsz[MMU_PAGE_SIZES];
970 	uint8_t i, j, max;
971 	uint16_t oldval, newval;
972 
973 	/*
974 	 * We only consider reprogramming the TLBs if one or more of
975 	 * the two most used page sizes changes and we're using
976 	 * large pages in this process.
977 	 */
978 	if (SFMMU_LGPGS_INUSE(sfmmup)) {
979 		/* Sort page sizes. */
980 		for (i = 0; i < mmu_page_sizes; i++) {
981 			sortcnt[i] = ttecnt[i];
982 		}
983 		for (j = 0; j < mmu_page_sizes; j++) {
984 			for (i = mmu_page_sizes - 1, max = 0; i > 0; i--) {
985 				if (sortcnt[i] > sortcnt[max])
986 					max = i;
987 			}
988 			tmp_pgsz[j] = max;
989 			sortcnt[max] = 0;
990 		}
991 
992 		oldval = sfmmup->sfmmu_pgsz[0] << 8 | sfmmup->sfmmu_pgsz[1];
993 
994 		mmu_setup_page_sizes(sfmmup, ttecnt, tmp_pgsz);
995 
996 		/* Check 2 largest values after the sort. */
997 		newval = tmp_pgsz[0] << 8 | tmp_pgsz[1];
998 		if (newval != oldval) {
999 			sfmmu_reprog_pgsz_arr(sfmmup, tmp_pgsz);
1000 		}
1001 	}
1002 }
1003 
1004 /*
1005  * Return processor specific async error structure
1006  * size used.
1007  */
1008 int
1009 cpu_aflt_size(void)
1010 {
1011 	return (sizeof (opl_async_flt_t));
1012 }
1013 
1014 /*
1015  * The cpu_sync_log_err() function is called via the [uc]e_drain() function to
1016  * post-process CPU events that are dequeued.  As such, it can be invoked
1017  * from softint context, from AST processing in the trap() flow, or from the
1018  * panic flow.  We decode the CPU-specific data, and take appropriate actions.
1019  * Historically this entry point was used to log the actual cmn_err(9F) text;
1020  * now with FMA it is used to prepare 'flt' to be converted into an ereport.
1021  * With FMA this function now also returns a flag which indicates to the
1022  * caller whether the ereport should be posted (1) or suppressed (0).
1023  */
1024 /*ARGSUSED*/
1025 static int
1026 cpu_sync_log_err(void *flt)
1027 {
1028 	opl_async_flt_t *opl_flt = (opl_async_flt_t *)flt;
1029 	struct async_flt *aflt = (struct async_flt *)flt;
1030 
1031 	/*
1032 	 * No extra processing of urgent error events.
1033 	 * Always generate ereports for these events.
1034 	 */
1035 	if (aflt->flt_status == OPL_ECC_URGENT_TRAP)
1036 		return (1);
1037 
1038 	/*
1039 	 * Additional processing for synchronous errors.
1040 	 */
1041 	switch (opl_flt->flt_type) {
1042 	case OPL_CPU_INV_SFSR:
1043 		return (1);
1044 
1045 	case OPL_CPU_SYNC_UE:
1046 		/*
1047 		 * The validity: SFSR_MK_UE bit has been checked
1048 		 * in opl_cpu_sync_error()
1049 		 * No more check is required.
1050 		 *
1051 		 * opl_flt->flt_eid_mod and flt_eid_sid have been set by H/W,
1052 		 * and they have been retrieved in cpu_queue_events()
1053 		 */
1054 
1055 		if (opl_flt->flt_eid_mod == OPL_ERRID_MEM) {
1056 			ASSERT(aflt->flt_in_memory);
1057 			/*
1058 			 * We want to skip logging only if ALL the following
1059 			 * conditions are true:
1060 			 *
1061 			 *	1. We are not panicing already.
1062 			 *	2. The error is a memory error.
1063 			 *	3. There is only one error.
1064 			 *	4. The error is on a retired page.
1065 			 *	5. The error occurred under on_trap
1066 			 *	protection AFLT_PROT_EC
1067 			 */
1068 			if (!panicstr && aflt->flt_prot == AFLT_PROT_EC &&
1069 			    page_retire_check(aflt->flt_addr, NULL) == 0) {
1070 				/*
1071 				 * Do not log an error from
1072 				 * the retired page
1073 				 */
1074 				softcall(ecc_page_zero, (void *)aflt->flt_addr);
1075 				return (0);
1076 			}
1077 			if (!panicstr)
1078 				cpu_page_retire(opl_flt);
1079 		}
1080 		return (1);
1081 
1082 	case OPL_CPU_SYNC_OTHERS:
1083 		/*
1084 		 * For the following error cases, the processor HW does
1085 		 * not set the flt_eid_mod/flt_eid_sid. Instead, SW will attempt
1086 		 * to assign appropriate values here to reflect what we
1087 		 * think is the most likely cause of the problem w.r.t to
1088 		 * the particular error event.  For Buserr and timeout
1089 		 * error event, we will assign OPL_ERRID_CHANNEL as the
1090 		 * most likely reason.  For TLB parity or multiple hit
1091 		 * error events, we will assign the reason as
1092 		 * OPL_ERRID_CPU (cpu related problem) and set the
1093 		 * flt_eid_sid to point to the cpuid.
1094 		 */
1095 
1096 		if (opl_flt->flt_bit & (SFSR_BERR|SFSR_TO)) {
1097 			/*
1098 			 * flt_eid_sid will not be used for this case.
1099 			 */
1100 			opl_flt->flt_eid_mod = OPL_ERRID_CHANNEL;
1101 		}
1102 		if (opl_flt->flt_bit & (SFSR_TLB_MUL|SFSR_TLB_PRT)) {
1103 			opl_flt->flt_eid_mod = OPL_ERRID_CPU;
1104 			opl_flt->flt_eid_sid = aflt->flt_inst;
1105 		}
1106 
1107 		/*
1108 		 * In case of no effective error bit
1109 		 */
1110 		if ((opl_flt->flt_bit & SFSR_ERRS) == 0) {
1111 			opl_flt->flt_eid_mod = OPL_ERRID_CPU;
1112 			opl_flt->flt_eid_sid = aflt->flt_inst;
1113 		}
1114 		break;
1115 
1116 		default:
1117 			return (1);
1118 	}
1119 	return (1);
1120 }
1121 
1122 /*
1123  * Retire the bad page that may contain the flushed error.
1124  */
1125 void
1126 cpu_page_retire(opl_async_flt_t *opl_flt)
1127 {
1128 	struct async_flt *aflt = (struct async_flt *)opl_flt;
1129 	(void) page_retire(aflt->flt_addr, PR_UE);
1130 }
1131 
1132 /*
1133  * Invoked by error_init() early in startup and therefore before
1134  * startup_errorq() is called to drain any error Q -
1135  *
1136  * startup()
1137  *   startup_end()
1138  *     error_init()
1139  *       cpu_error_init()
1140  * errorq_init()
1141  *   errorq_drain()
1142  * start_other_cpus()
1143  *
1144  * The purpose of this routine is to create error-related taskqs.  Taskqs
1145  * are used for this purpose because cpu_lock can't be grabbed from interrupt
1146  * context.
1147  *
1148  */
1149 /*ARGSUSED*/
1150 void
1151 cpu_error_init(int items)
1152 {
1153 	opl_err_log = (opl_errlog_t *)
1154 	    kmem_alloc(ERRLOG_ALLOC_SZ, KM_SLEEP);
1155 	if ((uint64_t)opl_err_log & MMU_PAGEOFFSET)
1156 		cmn_err(CE_PANIC, "The base address of the error log "
1157 		    "is not page aligned");
1158 }
1159 
1160 /*
1161  * We route all errors through a single switch statement.
1162  */
1163 void
1164 cpu_ue_log_err(struct async_flt *aflt)
1165 {
1166 	switch (aflt->flt_class) {
1167 	case CPU_FAULT:
1168 		if (cpu_sync_log_err(aflt))
1169 			cpu_ereport_post(aflt);
1170 		break;
1171 
1172 	case BUS_FAULT:
1173 		bus_async_log_err(aflt);
1174 		break;
1175 
1176 	default:
1177 		cmn_err(CE_WARN, "discarding async error %p with invalid "
1178 		    "fault class (0x%x)", (void *)aflt, aflt->flt_class);
1179 		return;
1180 	}
1181 }
1182 
1183 /*
1184  * Routine for panic hook callback from panic_idle().
1185  *
1186  * Nothing to do here.
1187  */
1188 void
1189 cpu_async_panic_callb(void)
1190 {
1191 }
1192 
1193 /*
1194  * Routine to return a string identifying the physical name
1195  * associated with a memory/cache error.
1196  */
1197 /*ARGSUSED*/
1198 int
1199 cpu_get_mem_unum(int synd_status, ushort_t flt_synd, uint64_t flt_stat,
1200     uint64_t flt_addr, int flt_bus_id, int flt_in_memory,
1201     ushort_t flt_status, char *buf, int buflen, int *lenp)
1202 {
1203 	int synd_code;
1204 	int ret;
1205 
1206 	/*
1207 	 * An AFSR of -1 defaults to a memory syndrome.
1208 	 */
1209 	synd_code = (int)flt_synd;
1210 
1211 	if (&plat_get_mem_unum) {
1212 		if ((ret = plat_get_mem_unum(synd_code, flt_addr, flt_bus_id,
1213 		    flt_in_memory, flt_status, buf, buflen, lenp)) != 0) {
1214 			buf[0] = '\0';
1215 			*lenp = 0;
1216 		}
1217 		return (ret);
1218 	}
1219 	buf[0] = '\0';
1220 	*lenp = 0;
1221 	return (ENOTSUP);
1222 }
1223 
1224 /*
1225  * Wrapper for cpu_get_mem_unum() routine that takes an
1226  * async_flt struct rather than explicit arguments.
1227  */
1228 int
1229 cpu_get_mem_unum_aflt(int synd_status, struct async_flt *aflt,
1230     char *buf, int buflen, int *lenp)
1231 {
1232 	/*
1233 	 * We always pass -1 so that cpu_get_mem_unum will interpret this as a
1234 	 * memory error.
1235 	 */
1236 	return (cpu_get_mem_unum(synd_status, aflt->flt_synd,
1237 	    (uint64_t)-1,
1238 	    aflt->flt_addr, aflt->flt_bus_id, aflt->flt_in_memory,
1239 	    aflt->flt_status, buf, buflen, lenp));
1240 }
1241 
1242 /*
1243  * This routine is a more generic interface to cpu_get_mem_unum()
1244  * that may be used by other modules (e.g. mm).
1245  */
1246 /*ARGSUSED*/
1247 int
1248 cpu_get_mem_name(uint64_t synd, uint64_t *afsr, uint64_t afar,
1249     char *buf, int buflen, int *lenp)
1250 {
1251 	int synd_status, flt_in_memory, ret;
1252 	ushort_t flt_status = 0;
1253 	char unum[UNUM_NAMLEN];
1254 
1255 	/*
1256 	 * Check for an invalid address.
1257 	 */
1258 	if (afar == (uint64_t)-1)
1259 		return (ENXIO);
1260 
1261 	if (synd == (uint64_t)-1)
1262 		synd_status = AFLT_STAT_INVALID;
1263 	else
1264 		synd_status = AFLT_STAT_VALID;
1265 
1266 	flt_in_memory = (*afsr & SFSR_MEMORY) &&
1267 	    pf_is_memory(afar >> MMU_PAGESHIFT);
1268 
1269 	ret = cpu_get_mem_unum(synd_status, (ushort_t)synd, *afsr, afar,
1270 	    CPU->cpu_id, flt_in_memory, flt_status, unum, UNUM_NAMLEN, lenp);
1271 	if (ret != 0)
1272 		return (ret);
1273 
1274 	if (*lenp >= buflen)
1275 		return (ENAMETOOLONG);
1276 
1277 	(void) strncpy(buf, unum, buflen);
1278 
1279 	return (0);
1280 }
1281 
1282 /*
1283  * Routine to return memory information associated
1284  * with a physical address and syndrome.
1285  */
1286 /*ARGSUSED*/
1287 int
1288 cpu_get_mem_info(uint64_t synd, uint64_t afar,
1289     uint64_t *mem_sizep, uint64_t *seg_sizep, uint64_t *bank_sizep,
1290     int *segsp, int *banksp, int *mcidp)
1291 {
1292 	int synd_code = (int)synd;
1293 
1294 	if (afar == (uint64_t)-1)
1295 		return (ENXIO);
1296 
1297 	if (p2get_mem_info != NULL)
1298 		return ((p2get_mem_info)(synd_code, afar, mem_sizep, seg_sizep,
1299 		    bank_sizep, segsp, banksp, mcidp));
1300 	else
1301 		return (ENOTSUP);
1302 }
1303 
1304 /*
1305  * Routine to return a string identifying the physical
1306  * name associated with a cpuid.
1307  */
1308 int
1309 cpu_get_cpu_unum(int cpuid, char *buf, int buflen, int *lenp)
1310 {
1311 	int ret;
1312 	char unum[UNUM_NAMLEN];
1313 
1314 	if (&plat_get_cpu_unum) {
1315 		if ((ret = plat_get_cpu_unum(cpuid, unum, UNUM_NAMLEN,
1316 		    lenp)) != 0)
1317 			return (ret);
1318 	} else {
1319 		return (ENOTSUP);
1320 	}
1321 
1322 	if (*lenp >= buflen)
1323 		return (ENAMETOOLONG);
1324 
1325 	(void) strncpy(buf, unum, *lenp);
1326 
1327 	return (0);
1328 }
1329 
1330 /*
1331  * This routine exports the name buffer size.
1332  */
1333 size_t
1334 cpu_get_name_bufsize()
1335 {
1336 	return (UNUM_NAMLEN);
1337 }
1338 
1339 /*
1340  * Flush the entire ecache by ASI_L2_CNTL.U2_FLUSH
1341  */
1342 void
1343 cpu_flush_ecache(void)
1344 {
1345 	flush_ecache(ecache_flushaddr, cpunodes[CPU->cpu_id].ecache_size,
1346 	    cpunodes[CPU->cpu_id].ecache_linesize);
1347 }
1348 
1349 static uint8_t
1350 flt_to_trap_type(struct async_flt *aflt)
1351 {
1352 	if (aflt->flt_status & OPL_ECC_ISYNC_TRAP)
1353 		return (TRAP_TYPE_ECC_I);
1354 	if (aflt->flt_status & OPL_ECC_DSYNC_TRAP)
1355 		return (TRAP_TYPE_ECC_D);
1356 	if (aflt->flt_status & OPL_ECC_URGENT_TRAP)
1357 		return (TRAP_TYPE_URGENT);
1358 	return (TRAP_TYPE_UNKNOWN);
1359 }
1360 
1361 /*
1362  * Encode the data saved in the opl_async_flt_t struct into
1363  * the FM ereport payload.
1364  */
1365 /* ARGSUSED */
1366 static void
1367 cpu_payload_add_aflt(struct async_flt *aflt, nvlist_t *payload,
1368 		nvlist_t *resource)
1369 {
1370 	opl_async_flt_t *opl_flt = (opl_async_flt_t *)aflt;
1371 	char unum[UNUM_NAMLEN];
1372 	char sbuf[21]; /* sizeof (UINT64_MAX) + '\0' */
1373 	int len;
1374 
1375 
1376 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_SFSR) {
1377 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_SFSR,
1378 		    DATA_TYPE_UINT64, aflt->flt_stat, NULL);
1379 	}
1380 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_SFAR) {
1381 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_SFAR,
1382 		    DATA_TYPE_UINT64, aflt->flt_addr, NULL);
1383 	}
1384 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_UGESR) {
1385 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_UGESR,
1386 		    DATA_TYPE_UINT64, aflt->flt_stat, NULL);
1387 	}
1388 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_PC) {
1389 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_PC,
1390 		    DATA_TYPE_UINT64, (uint64_t)aflt->flt_pc, NULL);
1391 	}
1392 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_TL) {
1393 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_TL,
1394 		    DATA_TYPE_UINT8, (uint8_t)aflt->flt_tl, NULL);
1395 	}
1396 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_TT) {
1397 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_TT,
1398 		    DATA_TYPE_UINT8, flt_to_trap_type(aflt), NULL);
1399 	}
1400 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_PRIV) {
1401 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_PRIV,
1402 		    DATA_TYPE_BOOLEAN_VALUE,
1403 		    (aflt->flt_priv ? B_TRUE : B_FALSE), NULL);
1404 	}
1405 	if (aflt->flt_payload & FM_EREPORT_PAYLOAD_FLAG_FLT_STATUS) {
1406 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_FLT_STATUS,
1407 		    DATA_TYPE_UINT64, (uint64_t)aflt->flt_status, NULL);
1408 	}
1409 
1410 	switch (opl_flt->flt_eid_mod) {
1411 	case OPL_ERRID_CPU:
1412 		(void) snprintf(sbuf, sizeof (sbuf), "%llX",
1413 		    (u_longlong_t)cpunodes[opl_flt->flt_eid_sid].device_id);
1414 		(void) fm_fmri_cpu_set(resource, FM_CPU_SCHEME_VERSION,
1415 		    NULL, opl_flt->flt_eid_sid,
1416 		    (uint8_t *)&cpunodes[opl_flt->flt_eid_sid].version, sbuf);
1417 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_RESOURCE,
1418 		    DATA_TYPE_NVLIST, resource, NULL);
1419 		break;
1420 
1421 	case OPL_ERRID_CHANNEL:
1422 		/*
1423 		 * No resource is created but the cpumem DE will find
1424 		 * the defective path by retreiving EID from SFSR which is
1425 		 * included in the payload.
1426 		 */
1427 		break;
1428 
1429 	case OPL_ERRID_MEM:
1430 		(void) cpu_get_mem_unum_aflt(0, aflt, unum, UNUM_NAMLEN, &len);
1431 		(void) fm_fmri_mem_set(resource, FM_MEM_SCHEME_VERSION, NULL,
1432 		    unum, NULL, (uint64_t)-1);
1433 		fm_payload_set(payload, FM_EREPORT_PAYLOAD_NAME_RESOURCE,
1434 		    DATA_TYPE_NVLIST, resource, NULL);
1435 		break;
1436 
1437 	case OPL_ERRID_PATH:
1438 		/*
1439 		 * No resource is created but the cpumem DE will find
1440 		 * the defective path by retreiving EID from SFSR which is
1441 		 * included in the payload.
1442 		 */
1443 		break;
1444 	}
1445 }
1446 
1447 /*
1448  * Returns whether fault address is valid for this error bit and
1449  * whether the address is "in memory" (i.e. pf_is_memory returns 1).
1450  */
1451 /*ARGSUSED*/
1452 static int
1453 cpu_flt_in_memory(opl_async_flt_t *opl_flt, uint64_t t_afsr_bit)
1454 {
1455 	struct async_flt *aflt = (struct async_flt *)opl_flt;
1456 
1457 	if (aflt->flt_status & (OPL_ECC_SYNC_TRAP)) {
1458 		return ((t_afsr_bit & SFSR_MEMORY) &&
1459 		    pf_is_memory(aflt->flt_addr >> MMU_PAGESHIFT));
1460 	}
1461 	return (0);
1462 }
1463 
1464 /*
1465  * In OPL SCF does the stick synchronization.
1466  */
1467 void
1468 sticksync_slave(void)
1469 {
1470 }
1471 
1472 /*
1473  * In OPL SCF does the stick synchronization.
1474  */
1475 void
1476 sticksync_master(void)
1477 {
1478 }
1479 
1480 /*
1481  * Cpu private unitialization.  OPL cpus do not use the private area.
1482  */
1483 void
1484 cpu_uninit_private(struct cpu *cp)
1485 {
1486 	cmp_delete_cpu(cp->cpu_id);
1487 }
1488 
1489 /*
1490  * Always flush an entire cache.
1491  */
1492 void
1493 cpu_error_ecache_flush(void)
1494 {
1495 	cpu_flush_ecache();
1496 }
1497 
1498 void
1499 cpu_ereport_post(struct async_flt *aflt)
1500 {
1501 	char *cpu_type, buf[FM_MAX_CLASS];
1502 	nv_alloc_t *nva = NULL;
1503 	nvlist_t *ereport, *detector, *resource;
1504 	errorq_elem_t *eqep;
1505 	char sbuf[21]; /* sizeof (UINT64_MAX) + '\0' */
1506 
1507 	if (aflt->flt_panic || panicstr) {
1508 		eqep = errorq_reserve(ereport_errorq);
1509 		if (eqep == NULL)
1510 			return;
1511 		ereport = errorq_elem_nvl(ereport_errorq, eqep);
1512 		nva = errorq_elem_nva(ereport_errorq, eqep);
1513 	} else {
1514 		ereport = fm_nvlist_create(nva);
1515 	}
1516 
1517 	/*
1518 	 * Create the scheme "cpu" FMRI.
1519 	 */
1520 	detector = fm_nvlist_create(nva);
1521 	resource = fm_nvlist_create(nva);
1522 	switch (cpunodes[aflt->flt_inst].implementation) {
1523 	case OLYMPUS_C_IMPL:
1524 		cpu_type = FM_EREPORT_CPU_SPARC64_VI;
1525 		break;
1526 	case JUPITER_IMPL:
1527 		cpu_type = FM_EREPORT_CPU_SPARC64_VII;
1528 		break;
1529 	default:
1530 		cpu_type = FM_EREPORT_CPU_UNSUPPORTED;
1531 		break;
1532 	}
1533 	(void) snprintf(sbuf, sizeof (sbuf), "%llX",
1534 	    (u_longlong_t)cpunodes[aflt->flt_inst].device_id);
1535 	(void) fm_fmri_cpu_set(detector, FM_CPU_SCHEME_VERSION, NULL,
1536 	    aflt->flt_inst, (uint8_t *)&cpunodes[aflt->flt_inst].version,
1537 	    sbuf);
1538 
1539 	/*
1540 	 * Encode all the common data into the ereport.
1541 	 */
1542 	(void) snprintf(buf, FM_MAX_CLASS, "%s.%s.%s",
1543 	    FM_ERROR_CPU, cpu_type, aflt->flt_erpt_class);
1544 
1545 	fm_ereport_set(ereport, FM_EREPORT_VERSION, buf,
1546 	    fm_ena_generate(aflt->flt_id, FM_ENA_FMT1), detector, NULL);
1547 
1548 	/*
1549 	 * Encode the error specific data that was saved in
1550 	 * the async_flt structure into the ereport.
1551 	 */
1552 	cpu_payload_add_aflt(aflt, ereport, resource);
1553 
1554 	if (aflt->flt_panic || panicstr) {
1555 		errorq_commit(ereport_errorq, eqep, ERRORQ_SYNC);
1556 	} else {
1557 		(void) fm_ereport_post(ereport, EVCH_TRYHARD);
1558 		fm_nvlist_destroy(ereport, FM_NVA_FREE);
1559 		fm_nvlist_destroy(detector, FM_NVA_FREE);
1560 		fm_nvlist_destroy(resource, FM_NVA_FREE);
1561 	}
1562 }
1563 
1564 void
1565 cpu_run_bus_error_handlers(struct async_flt *aflt, int expected)
1566 {
1567 	int status;
1568 	ddi_fm_error_t de;
1569 
1570 	bzero(&de, sizeof (ddi_fm_error_t));
1571 
1572 	de.fme_version = DDI_FME_VERSION;
1573 	de.fme_ena = fm_ena_generate(aflt->flt_id, FM_ENA_FMT1);
1574 	de.fme_flag = expected;
1575 	de.fme_bus_specific = (void *)aflt->flt_addr;
1576 	status = ndi_fm_handler_dispatch(ddi_root_node(), NULL, &de);
1577 	if ((aflt->flt_prot == AFLT_PROT_NONE) && (status == DDI_FM_FATAL))
1578 		aflt->flt_panic = 1;
1579 }
1580 
1581 void
1582 cpu_errorq_dispatch(char *error_class, void *payload, size_t payload_sz,
1583     errorq_t *eqp, uint_t flag)
1584 {
1585 	struct async_flt *aflt = (struct async_flt *)payload;
1586 
1587 	aflt->flt_erpt_class = error_class;
1588 	errorq_dispatch(eqp, payload, payload_sz, flag);
1589 }
1590 
1591 void
1592 adjust_hw_copy_limits(int ecache_size)
1593 {
1594 	/*
1595 	 * Set hw copy limits.
1596 	 *
1597 	 * /etc/system will be parsed later and can override one or more
1598 	 * of these settings.
1599 	 *
1600 	 * At this time, ecache size seems only mildly relevant.
1601 	 * We seem to run into issues with the d-cache and stalls
1602 	 * we see on misses.
1603 	 *
1604 	 * Cycle measurement indicates that 2 byte aligned copies fare
1605 	 * little better than doing things with VIS at around 512 bytes.
1606 	 * 4 byte aligned shows promise until around 1024 bytes. 8 Byte
1607 	 * aligned is faster whenever the source and destination data
1608 	 * in cache and the total size is less than 2 Kbytes.  The 2K
1609 	 * limit seems to be driven by the 2K write cache.
1610 	 * When more than 2K of copies are done in non-VIS mode, stores
1611 	 * backup in the write cache.  In VIS mode, the write cache is
1612 	 * bypassed, allowing faster cache-line writes aligned on cache
1613 	 * boundaries.
1614 	 *
1615 	 * In addition, in non-VIS mode, there is no prefetching, so
1616 	 * for larger copies, the advantage of prefetching to avoid even
1617 	 * occasional cache misses is enough to justify using the VIS code.
1618 	 *
1619 	 * During testing, it was discovered that netbench ran 3% slower
1620 	 * when hw_copy_limit_8 was 2K or larger.  Apparently for server
1621 	 * applications, data is only used once (copied to the output
1622 	 * buffer, then copied by the network device off the system).  Using
1623 	 * the VIS copy saves more L2 cache state.  Network copies are
1624 	 * around 1.3K to 1.5K in size for historical reasons.
1625 	 *
1626 	 * Therefore, a limit of 1K bytes will be used for the 8 byte
1627 	 * aligned copy even for large caches and 8 MB ecache.  The
1628 	 * infrastructure to allow different limits for different sized
1629 	 * caches is kept to allow further tuning in later releases.
1630 	 */
1631 
1632 	if (min_ecache_size == 0 && use_hw_bcopy) {
1633 		/*
1634 		 * First time through - should be before /etc/system
1635 		 * is read.
1636 		 * Could skip the checks for zero but this lets us
1637 		 * preserve any debugger rewrites.
1638 		 */
1639 		if (hw_copy_limit_1 == 0) {
1640 			hw_copy_limit_1 = VIS_COPY_THRESHOLD;
1641 			priv_hcl_1 = hw_copy_limit_1;
1642 		}
1643 		if (hw_copy_limit_2 == 0) {
1644 			hw_copy_limit_2 = 2 * VIS_COPY_THRESHOLD;
1645 			priv_hcl_2 = hw_copy_limit_2;
1646 		}
1647 		if (hw_copy_limit_4 == 0) {
1648 			hw_copy_limit_4 = 4 * VIS_COPY_THRESHOLD;
1649 			priv_hcl_4 = hw_copy_limit_4;
1650 		}
1651 		if (hw_copy_limit_8 == 0) {
1652 			hw_copy_limit_8 = 4 * VIS_COPY_THRESHOLD;
1653 			priv_hcl_8 = hw_copy_limit_8;
1654 		}
1655 		min_ecache_size = ecache_size;
1656 	} else {
1657 		/*
1658 		 * MP initialization. Called *after* /etc/system has
1659 		 * been parsed. One CPU has already been initialized.
1660 		 * Need to cater for /etc/system having scragged one
1661 		 * of our values.
1662 		 */
1663 		if (ecache_size == min_ecache_size) {
1664 			/*
1665 			 * Same size ecache. We do nothing unless we
1666 			 * have a pessimistic ecache setting. In that
1667 			 * case we become more optimistic (if the cache is
1668 			 * large enough).
1669 			 */
1670 			if (hw_copy_limit_8 == 4 * VIS_COPY_THRESHOLD) {
1671 				/*
1672 				 * Need to adjust hw_copy_limit* from our
1673 				 * pessimistic uniprocessor value to a more
1674 				 * optimistic UP value *iff* it hasn't been
1675 				 * reset.
1676 				 */
1677 				if ((ecache_size > 1048576) &&
1678 				    (priv_hcl_8 == hw_copy_limit_8)) {
1679 					if (ecache_size <= 2097152)
1680 						hw_copy_limit_8 = 4 *
1681 						    VIS_COPY_THRESHOLD;
1682 					else if (ecache_size <= 4194304)
1683 						hw_copy_limit_8 = 4 *
1684 						    VIS_COPY_THRESHOLD;
1685 					else
1686 						hw_copy_limit_8 = 4 *
1687 						    VIS_COPY_THRESHOLD;
1688 					priv_hcl_8 = hw_copy_limit_8;
1689 				}
1690 			}
1691 		} else if (ecache_size < min_ecache_size) {
1692 			/*
1693 			 * A different ecache size. Can this even happen?
1694 			 */
1695 			if (priv_hcl_8 == hw_copy_limit_8) {
1696 				/*
1697 				 * The previous value that we set
1698 				 * is unchanged (i.e., it hasn't been
1699 				 * scragged by /etc/system). Rewrite it.
1700 				 */
1701 				if (ecache_size <= 1048576)
1702 					hw_copy_limit_8 = 8 *
1703 					    VIS_COPY_THRESHOLD;
1704 				else if (ecache_size <= 2097152)
1705 					hw_copy_limit_8 = 8 *
1706 					    VIS_COPY_THRESHOLD;
1707 				else if (ecache_size <= 4194304)
1708 					hw_copy_limit_8 = 8 *
1709 					    VIS_COPY_THRESHOLD;
1710 				else
1711 					hw_copy_limit_8 = 10 *
1712 					    VIS_COPY_THRESHOLD;
1713 				priv_hcl_8 = hw_copy_limit_8;
1714 				min_ecache_size = ecache_size;
1715 			}
1716 		}
1717 	}
1718 }
1719 
1720 #define	VIS_BLOCKSIZE		64
1721 
1722 int
1723 dtrace_blksuword32_err(uintptr_t addr, uint32_t *data)
1724 {
1725 	int ret, watched;
1726 
1727 	watched = watch_disable_addr((void *)addr, VIS_BLOCKSIZE, S_WRITE);
1728 	ret = dtrace_blksuword32(addr, data, 0);
1729 	if (watched)
1730 		watch_enable_addr((void *)addr, VIS_BLOCKSIZE, S_WRITE);
1731 
1732 	return (ret);
1733 }
1734 
1735 void
1736 opl_cpu_reg_init()
1737 {
1738 	uint64_t	this_cpu_log;
1739 
1740 	if (cpu[getprocessorid()] == &cpu0 && opl_cpu0_log_setup == 1) {
1741 		/*
1742 		 * Support for "ta 3"
1743 		 */
1744 		opl_ta3();
1745 
1746 		/*
1747 		 * If we are being called at boot time on cpu0 the error
1748 		 * log is already set up in cpu_setup. Clear the
1749 		 * opl_cpu0_log_setup flag so that a subsequent DR of cpu0 will
1750 		 * do the proper initialization.
1751 		 */
1752 		opl_cpu0_log_setup = 0;
1753 		return;
1754 	}
1755 
1756 	/*
1757 	 * Initialize Error log Scratch register for error handling.
1758 	 */
1759 
1760 	this_cpu_log = va_to_pa((void*)(((uint64_t)opl_err_log) +
1761 	    ERRLOG_BUFSZ * (getprocessorid())));
1762 	opl_error_setup(this_cpu_log);
1763 
1764 	/*
1765 	 * Enable MMU translating multiple page sizes for
1766 	 * sITLB and sDTLB.
1767 	 */
1768 	opl_mpg_enable();
1769 }
1770 
1771 /*
1772  * Queue one event in ue_queue based on ecc_type_to_info entry.
1773  */
1774 static void
1775 cpu_queue_one_event(opl_async_flt_t *opl_flt, char *reason,
1776     ecc_type_to_info_t *eccp)
1777 {
1778 	struct async_flt *aflt = (struct async_flt *)opl_flt;
1779 
1780 	if (reason &&
1781 	    strlen(reason) + strlen(eccp->ec_reason) < MAX_REASON_STRING) {
1782 		(void) strcat(reason, eccp->ec_reason);
1783 	}
1784 
1785 	opl_flt->flt_bit = eccp->ec_afsr_bit;
1786 	opl_flt->flt_type = eccp->ec_flt_type;
1787 	aflt->flt_in_memory = cpu_flt_in_memory(opl_flt, opl_flt->flt_bit);
1788 	aflt->flt_payload = eccp->ec_err_payload;
1789 
1790 	ASSERT(aflt->flt_status & (OPL_ECC_SYNC_TRAP|OPL_ECC_URGENT_TRAP));
1791 	cpu_errorq_dispatch(eccp->ec_err_class, (void *)opl_flt,
1792 	    sizeof (opl_async_flt_t), ue_queue, aflt->flt_panic);
1793 }
1794 
1795 /*
1796  * Queue events on async event queue one event per error bit.
1797  * Return number of events queued.
1798  */
1799 int
1800 cpu_queue_events(opl_async_flt_t *opl_flt, char *reason, uint64_t t_afsr_errs)
1801 {
1802 	struct async_flt *aflt = (struct async_flt *)opl_flt;
1803 	ecc_type_to_info_t *eccp;
1804 	int nevents = 0;
1805 
1806 	/*
1807 	 * Queue expected errors, error bit and fault type must must match
1808 	 * in the ecc_type_to_info table.
1809 	 */
1810 	for (eccp = ecc_type_to_info; t_afsr_errs != 0 && eccp->ec_desc != NULL;
1811 	    eccp++) {
1812 		if ((eccp->ec_afsr_bit & t_afsr_errs) != 0 &&
1813 		    (eccp->ec_flags & aflt->flt_status) != 0) {
1814 			/*
1815 			 * UE error event can be further
1816 			 * classified/breakdown into finer granularity
1817 			 * based on the flt_eid_mod value set by HW.  We do
1818 			 * special handling here so that we can report UE
1819 			 * error in finer granularity as ue_mem,
1820 			 * ue_channel, ue_cpu or ue_path.
1821 			 */
1822 			if (eccp->ec_flt_type == OPL_CPU_SYNC_UE) {
1823 				opl_flt->flt_eid_mod = (aflt->flt_stat &
1824 				    SFSR_EID_MOD) >> SFSR_EID_MOD_SHIFT;
1825 				opl_flt->flt_eid_sid = (aflt->flt_stat &
1826 				    SFSR_EID_SID) >> SFSR_EID_SID_SHIFT;
1827 				/*
1828 				 * Need to advance eccp pointer by flt_eid_mod
1829 				 * so that we get an appropriate ecc pointer
1830 				 *
1831 				 * EID			# of advances
1832 				 * ----------------------------------
1833 				 * OPL_ERRID_MEM	0
1834 				 * OPL_ERRID_CHANNEL	1
1835 				 * OPL_ERRID_CPU	2
1836 				 * OPL_ERRID_PATH	3
1837 				 */
1838 				eccp += opl_flt->flt_eid_mod;
1839 			}
1840 			cpu_queue_one_event(opl_flt, reason, eccp);
1841 			t_afsr_errs &= ~eccp->ec_afsr_bit;
1842 			nevents++;
1843 		}
1844 	}
1845 
1846 	return (nevents);
1847 }
1848 
1849 /*
1850  * Sync. error wrapper functions.
1851  * We use these functions in order to transfer here from the
1852  * nucleus trap handler information about trap type (data or
1853  * instruction) and trap level (0 or above 0). This way we
1854  * get rid of using SFSR's reserved bits.
1855  */
1856 
1857 #define	OPL_SYNC_TL0	0
1858 #define	OPL_SYNC_TL1	1
1859 #define	OPL_ISYNC_ERR	0
1860 #define	OPL_DSYNC_ERR	1
1861 
1862 void
1863 opl_cpu_isync_tl0_error(struct regs *rp, ulong_t p_sfar, ulong_t p_sfsr)
1864 {
1865 	uint64_t t_sfar = p_sfar;
1866 	uint64_t t_sfsr = p_sfsr;
1867 
1868 	opl_cpu_sync_error(rp, t_sfar, t_sfsr,
1869 	    OPL_SYNC_TL0, OPL_ISYNC_ERR);
1870 }
1871 
1872 void
1873 opl_cpu_isync_tl1_error(struct regs *rp, ulong_t p_sfar, ulong_t p_sfsr)
1874 {
1875 	uint64_t t_sfar = p_sfar;
1876 	uint64_t t_sfsr = p_sfsr;
1877 
1878 	opl_cpu_sync_error(rp, t_sfar, t_sfsr,
1879 	    OPL_SYNC_TL1, OPL_ISYNC_ERR);
1880 }
1881 
1882 void
1883 opl_cpu_dsync_tl0_error(struct regs *rp, ulong_t p_sfar, ulong_t p_sfsr)
1884 {
1885 	uint64_t t_sfar = p_sfar;
1886 	uint64_t t_sfsr = p_sfsr;
1887 
1888 	opl_cpu_sync_error(rp, t_sfar, t_sfsr,
1889 	    OPL_SYNC_TL0, OPL_DSYNC_ERR);
1890 }
1891 
1892 void
1893 opl_cpu_dsync_tl1_error(struct regs *rp, ulong_t p_sfar, ulong_t p_sfsr)
1894 {
1895 	uint64_t t_sfar = p_sfar;
1896 	uint64_t t_sfsr = p_sfsr;
1897 
1898 	opl_cpu_sync_error(rp, t_sfar, t_sfsr,
1899 	    OPL_SYNC_TL1, OPL_DSYNC_ERR);
1900 }
1901 
1902 /*
1903  * The fj sync err handler transfers control here for UE, BERR, TO, TLB_MUL
1904  * and TLB_PRT.
1905  * This function is designed based on cpu_deferred_error().
1906  */
1907 
1908 static void
1909 opl_cpu_sync_error(struct regs *rp, ulong_t t_sfar, ulong_t t_sfsr,
1910     uint_t tl, uint_t derr)
1911 {
1912 	opl_async_flt_t opl_flt;
1913 	struct async_flt *aflt;
1914 	int trampolined = 0;
1915 	char pr_reason[MAX_REASON_STRING];
1916 	uint64_t log_sfsr;
1917 	int expected = DDI_FM_ERR_UNEXPECTED;
1918 	ddi_acc_hdl_t *hp;
1919 
1920 	/*
1921 	 * We need to look at p_flag to determine if the thread detected an
1922 	 * error while dumping core.  We can't grab p_lock here, but it's ok
1923 	 * because we just need a consistent snapshot and we know that everyone
1924 	 * else will store a consistent set of bits while holding p_lock.  We
1925 	 * don't have to worry about a race because SDOCORE is set once prior
1926 	 * to doing i/o from the process's address space and is never cleared.
1927 	 */
1928 	uint_t pflag = ttoproc(curthread)->p_flag;
1929 
1930 	pr_reason[0] = '\0';
1931 
1932 	/*
1933 	 * handle the specific error
1934 	 */
1935 	bzero(&opl_flt, sizeof (opl_async_flt_t));
1936 	aflt = (struct async_flt *)&opl_flt;
1937 	aflt->flt_id = gethrtime_waitfree();
1938 	aflt->flt_bus_id = getprocessorid();
1939 	aflt->flt_inst = CPU->cpu_id;
1940 	aflt->flt_stat = t_sfsr;
1941 	aflt->flt_addr = t_sfar;
1942 	aflt->flt_pc = (caddr_t)rp->r_pc;
1943 	aflt->flt_prot = (uchar_t)AFLT_PROT_NONE;
1944 	aflt->flt_class = (uchar_t)CPU_FAULT;
1945 	aflt->flt_priv = (uchar_t)(tl == 1 ? 1 : ((rp->r_tstate &
1946 	    TSTATE_PRIV) ? 1 : 0));
1947 	aflt->flt_tl = (uchar_t)tl;
1948 	aflt->flt_panic = (uchar_t)(tl != 0 || aft_testfatal != 0 ||
1949 	    (t_sfsr & (SFSR_TLB_MUL|SFSR_TLB_PRT)) != 0);
1950 	aflt->flt_core = (pflag & SDOCORE) ? 1 : 0;
1951 	aflt->flt_status = (derr) ? OPL_ECC_DSYNC_TRAP : OPL_ECC_ISYNC_TRAP;
1952 
1953 	/*
1954 	 * If SFSR.FV is not set, both SFSR and SFAR/SFPAR values are uncertain.
1955 	 * So, clear all error bits to avoid mis-handling and force the system
1956 	 * panicked.
1957 	 * We skip all the procedures below down to the panic message call.
1958 	 */
1959 	if (!(t_sfsr & SFSR_FV)) {
1960 		opl_flt.flt_type = OPL_CPU_INV_SFSR;
1961 		aflt->flt_panic = 1;
1962 		aflt->flt_payload = FM_EREPORT_PAYLOAD_SYNC;
1963 		cpu_errorq_dispatch(FM_EREPORT_CPU_INV_SFSR, (void *)&opl_flt,
1964 		    sizeof (opl_async_flt_t), ue_queue, aflt->flt_panic);
1965 		fm_panic("%sErrors(s)", "invalid SFSR");
1966 	}
1967 
1968 	/*
1969 	 * If either UE and MK bit is off, this is not valid UE error.
1970 	 * If it is not valid UE error, clear UE & MK_UE bits to prevent
1971 	 * mis-handling below.
1972 	 * aflt->flt_stat keeps the original bits as a reference.
1973 	 */
1974 	if ((t_sfsr & (SFSR_MK_UE|SFSR_UE)) !=
1975 	    (SFSR_MK_UE|SFSR_UE)) {
1976 		t_sfsr &= ~(SFSR_MK_UE|SFSR_UE);
1977 	}
1978 
1979 	/*
1980 	 * If the trap occurred in privileged mode at TL=0, we need to check to
1981 	 * see if we were executing in the kernel under on_trap() or t_lofault
1982 	 * protection.  If so, modify the saved registers so that we return
1983 	 * from the trap to the appropriate trampoline routine.
1984 	 */
1985 	if (!aflt->flt_panic && aflt->flt_priv && tl == 0) {
1986 		if (curthread->t_ontrap != NULL) {
1987 			on_trap_data_t *otp = curthread->t_ontrap;
1988 
1989 			if (otp->ot_prot & OT_DATA_EC) {
1990 				aflt->flt_prot = (uchar_t)AFLT_PROT_EC;
1991 				otp->ot_trap |= (ushort_t)OT_DATA_EC;
1992 				rp->r_pc = otp->ot_trampoline;
1993 				rp->r_npc = rp->r_pc + 4;
1994 				trampolined = 1;
1995 			}
1996 
1997 			if ((t_sfsr & (SFSR_TO | SFSR_BERR)) &&
1998 			    (otp->ot_prot & OT_DATA_ACCESS)) {
1999 				aflt->flt_prot = (uchar_t)AFLT_PROT_ACCESS;
2000 				otp->ot_trap |= (ushort_t)OT_DATA_ACCESS;
2001 				rp->r_pc = otp->ot_trampoline;
2002 				rp->r_npc = rp->r_pc + 4;
2003 				trampolined = 1;
2004 				/*
2005 				 * for peeks and caut_gets errors are expected
2006 				 */
2007 				hp = (ddi_acc_hdl_t *)otp->ot_handle;
2008 				if (!hp)
2009 					expected = DDI_FM_ERR_PEEK;
2010 				else if (hp->ah_acc.devacc_attr_access ==
2011 				    DDI_CAUTIOUS_ACC)
2012 					expected = DDI_FM_ERR_EXPECTED;
2013 			}
2014 
2015 		} else if (curthread->t_lofault) {
2016 			aflt->flt_prot = AFLT_PROT_COPY;
2017 			rp->r_g1 = EFAULT;
2018 			rp->r_pc = curthread->t_lofault;
2019 			rp->r_npc = rp->r_pc + 4;
2020 			trampolined = 1;
2021 		}
2022 	}
2023 
2024 	/*
2025 	 * If we're in user mode or we're doing a protected copy, we either
2026 	 * want the ASTON code below to send a signal to the user process
2027 	 * or we want to panic if aft_panic is set.
2028 	 *
2029 	 * If we're in privileged mode and we're not doing a copy, then we
2030 	 * need to check if we've trampolined.  If we haven't trampolined,
2031 	 * we should panic.
2032 	 */
2033 	if (!aflt->flt_priv || aflt->flt_prot == AFLT_PROT_COPY) {
2034 		if (t_sfsr & (SFSR_ERRS & ~(SFSR_BERR | SFSR_TO)))
2035 			aflt->flt_panic |= aft_panic;
2036 	} else if (!trampolined) {
2037 		aflt->flt_panic = 1;
2038 	}
2039 
2040 	/*
2041 	 * If we've trampolined due to a privileged TO or BERR, or if an
2042 	 * unprivileged TO or BERR occurred, we don't want to enqueue an
2043 	 * event for that TO or BERR.  Queue all other events (if any) besides
2044 	 * the TO/BERR.
2045 	 */
2046 	log_sfsr = t_sfsr;
2047 	if (trampolined) {
2048 		log_sfsr &= ~(SFSR_TO | SFSR_BERR);
2049 	} else if (!aflt->flt_priv) {
2050 		/*
2051 		 * User mode, suppress messages if
2052 		 * cpu_berr_to_verbose is not set.
2053 		 */
2054 		if (!cpu_berr_to_verbose)
2055 			log_sfsr &= ~(SFSR_TO | SFSR_BERR);
2056 	}
2057 
2058 	if (((log_sfsr & SFSR_ERRS) && (cpu_queue_events(&opl_flt, pr_reason,
2059 	    t_sfsr) == 0)) || ((t_sfsr & SFSR_ERRS) == 0)) {
2060 		opl_flt.flt_type = OPL_CPU_INV_SFSR;
2061 		aflt->flt_payload = FM_EREPORT_PAYLOAD_SYNC;
2062 		cpu_errorq_dispatch(FM_EREPORT_CPU_INV_SFSR, (void *)&opl_flt,
2063 		    sizeof (opl_async_flt_t), ue_queue, aflt->flt_panic);
2064 	}
2065 
2066 	if (t_sfsr & (SFSR_UE|SFSR_TO|SFSR_BERR)) {
2067 		cpu_run_bus_error_handlers(aflt, expected);
2068 	}
2069 
2070 	/*
2071 	 * Panic here if aflt->flt_panic has been set.  Enqueued errors will
2072 	 * be logged as part of the panic flow.
2073 	 */
2074 	if (aflt->flt_panic) {
2075 		if (pr_reason[0] == 0)
2076 			strcpy(pr_reason, "invalid SFSR ");
2077 
2078 		fm_panic("%sErrors(s)", pr_reason);
2079 	}
2080 
2081 	/*
2082 	 * If we queued an error and we are going to return from the trap and
2083 	 * the error was in user mode or inside of a copy routine, set AST flag
2084 	 * so the queue will be drained before returning to user mode.  The
2085 	 * AST processing will also act on our failure policy.
2086 	 */
2087 	if (!aflt->flt_priv || aflt->flt_prot == AFLT_PROT_COPY) {
2088 		int pcb_flag = 0;
2089 
2090 		if (t_sfsr & (SFSR_ERRS & ~(SFSR_BERR | SFSR_TO)))
2091 			pcb_flag |= ASYNC_HWERR;
2092 
2093 		if (t_sfsr & SFSR_BERR)
2094 			pcb_flag |= ASYNC_BERR;
2095 
2096 		if (t_sfsr & SFSR_TO)
2097 			pcb_flag |= ASYNC_BTO;
2098 
2099 		ttolwp(curthread)->lwp_pcb.pcb_flags |= pcb_flag;
2100 		aston(curthread);
2101 	}
2102 }
2103 
2104 /*ARGSUSED*/
2105 void
2106 opl_cpu_urgent_error(struct regs *rp, ulong_t p_ugesr, ulong_t tl)
2107 {
2108 	opl_async_flt_t opl_flt;
2109 	struct async_flt *aflt;
2110 	char pr_reason[MAX_REASON_STRING];
2111 
2112 	/* normalize tl */
2113 	tl = (tl >= 2 ? 1 : 0);
2114 	pr_reason[0] = '\0';
2115 
2116 	bzero(&opl_flt, sizeof (opl_async_flt_t));
2117 	aflt = (struct async_flt *)&opl_flt;
2118 	aflt->flt_id = gethrtime_waitfree();
2119 	aflt->flt_bus_id = getprocessorid();
2120 	aflt->flt_inst = CPU->cpu_id;
2121 	aflt->flt_stat = p_ugesr;
2122 	aflt->flt_pc = (caddr_t)rp->r_pc;
2123 	aflt->flt_class = (uchar_t)CPU_FAULT;
2124 	aflt->flt_tl = tl;
2125 	aflt->flt_priv = (uchar_t)(tl == 1 ? 1 : ((rp->r_tstate & TSTATE_PRIV) ?
2126 	    1 : 0));
2127 	aflt->flt_status = OPL_ECC_URGENT_TRAP;
2128 	aflt->flt_panic = 1;
2129 	/*
2130 	 * HW does not set mod/sid in case of urgent error.
2131 	 * So we have to set it here.
2132 	 */
2133 	opl_flt.flt_eid_mod = OPL_ERRID_CPU;
2134 	opl_flt.flt_eid_sid = aflt->flt_inst;
2135 
2136 	if (cpu_queue_events(&opl_flt, pr_reason, p_ugesr) == 0) {
2137 		opl_flt.flt_type = OPL_CPU_INV_UGESR;
2138 		aflt->flt_payload = FM_EREPORT_PAYLOAD_URGENT;
2139 		cpu_errorq_dispatch(FM_EREPORT_CPU_INV_URG, (void *)&opl_flt,
2140 		    sizeof (opl_async_flt_t), ue_queue, aflt->flt_panic);
2141 	}
2142 
2143 	fm_panic("Urgent Error");
2144 }
2145 
2146 /*
2147  * Initialization error counters resetting.
2148  */
2149 /* ARGSUSED */
2150 static void
2151 opl_ras_online(void *arg, cpu_t *cp, cyc_handler_t *hdlr, cyc_time_t *when)
2152 {
2153 	hdlr->cyh_func = (cyc_func_t)ras_cntr_reset;
2154 	hdlr->cyh_level = CY_LOW_LEVEL;
2155 	hdlr->cyh_arg = (void *)(uintptr_t)cp->cpu_id;
2156 
2157 	when->cyt_when = cp->cpu_id * (((hrtime_t)NANOSEC * 10)/ NCPU);
2158 	when->cyt_interval = (hrtime_t)NANOSEC * opl_async_check_interval;
2159 }
2160 
2161 void
2162 cpu_mp_init(void)
2163 {
2164 	cyc_omni_handler_t hdlr;
2165 
2166 	hdlr.cyo_online = opl_ras_online;
2167 	hdlr.cyo_offline = NULL;
2168 	hdlr.cyo_arg = NULL;
2169 	mutex_enter(&cpu_lock);
2170 	(void) cyclic_add_omni(&hdlr);
2171 	mutex_exit(&cpu_lock);
2172 }
2173 
2174 int heaplp_use_stlb = -1;
2175 
2176 void
2177 mmu_init_kernel_pgsz(struct hat *hat)
2178 {
2179 	uint_t tte = page_szc(segkmem_lpsize);
2180 	uchar_t new_cext_primary, new_cext_nucleus;
2181 
2182 	if (heaplp_use_stlb == 0) {
2183 		/* do not reprogram stlb */
2184 		tte = TTE8K;
2185 	} else if (!plat_prom_preserve_kctx_is_supported()) {
2186 		/* OBP does not support non-zero primary context */
2187 		tte = TTE8K;
2188 		heaplp_use_stlb = 0;
2189 	}
2190 
2191 	new_cext_nucleus = TAGACCEXT_MKSZPAIR(tte, TTE8K);
2192 	new_cext_primary = TAGACCEXT_MKSZPAIR(TTE8K, tte);
2193 
2194 	hat->sfmmu_cext = new_cext_primary;
2195 	kcontextreg = ((uint64_t)new_cext_nucleus << CTXREG_NEXT_SHIFT) |
2196 	    ((uint64_t)new_cext_primary << CTXREG_EXT_SHIFT);
2197 }
2198 
2199 size_t
2200 mmu_get_kernel_lpsize(size_t lpsize)
2201 {
2202 	uint_t tte;
2203 
2204 	if (lpsize == 0) {
2205 		/* no setting for segkmem_lpsize in /etc/system: use default */
2206 		return (MMU_PAGESIZE4M);
2207 	}
2208 
2209 	for (tte = TTE8K; tte <= TTE4M; tte++) {
2210 		if (lpsize == TTEBYTES(tte))
2211 			return (lpsize);
2212 	}
2213 
2214 	return (TTEBYTES(TTE8K));
2215 }
2216 
2217 /*
2218  * Support for ta 3.
2219  * We allocate here a buffer for each cpu
2220  * for saving the current register window.
2221  */
2222 typedef struct win_regs {
2223 	uint64_t l[8];
2224 	uint64_t i[8];
2225 } win_regs_t;
2226 static void
2227 opl_ta3(void)
2228 {
2229 	/*
2230 	 * opl_ta3 should only be called once at boot time.
2231 	 */
2232 	if (opl_ta3_save == NULL)
2233 		opl_ta3_save = (char *)kmem_alloc(NCPU * sizeof (win_regs_t),
2234 		    KM_SLEEP);
2235 }
2236 
2237 /*
2238  * The following are functions that are unused in
2239  * OPL cpu module. They are defined here to resolve
2240  * dependencies in the "unix" module.
2241  * Unused functions that should never be called in
2242  * OPL are coded with ASSERT(0).
2243  */
2244 
2245 void
2246 cpu_disable_errors(void)
2247 {}
2248 
2249 void
2250 cpu_enable_errors(void)
2251 { ASSERT(0); }
2252 
2253 /*ARGSUSED*/
2254 void
2255 cpu_ce_scrub_mem_err(struct async_flt *ecc, boolean_t t)
2256 { ASSERT(0); }
2257 
2258 /*ARGSUSED*/
2259 void
2260 cpu_faulted_enter(struct cpu *cp)
2261 {}
2262 
2263 /*ARGSUSED*/
2264 void
2265 cpu_faulted_exit(struct cpu *cp)
2266 {}
2267 
2268 /*ARGSUSED*/
2269 void
2270 cpu_check_allcpus(struct async_flt *aflt)
2271 {}
2272 
2273 /*ARGSUSED*/
2274 void
2275 cpu_ce_log_err(struct async_flt *aflt, errorq_elem_t *t)
2276 { ASSERT(0); }
2277 
2278 /*ARGSUSED*/
2279 void
2280 cpu_check_ce(int flag, uint64_t pa, caddr_t va, uint_t psz)
2281 { ASSERT(0); }
2282 
2283 /*ARGSUSED*/
2284 void
2285 cpu_ce_count_unum(struct async_flt *ecc, int len, char *unum)
2286 { ASSERT(0); }
2287 
2288 /*ARGSUSED*/
2289 void
2290 cpu_busy_ecache_scrub(struct cpu *cp)
2291 {}
2292 
2293 /*ARGSUSED*/
2294 void
2295 cpu_idle_ecache_scrub(struct cpu *cp)
2296 {}
2297 
2298 /* ARGSUSED */
2299 void
2300 cpu_change_speed(uint64_t divisor, uint64_t arg2)
2301 { ASSERT(0); }
2302 
2303 void
2304 cpu_init_cache_scrub(void)
2305 {}
2306 
2307 /* ARGSUSED */
2308 int
2309 cpu_get_mem_sid(char *unum, char *buf, int buflen, int *lenp)
2310 {
2311 	if (&plat_get_mem_sid) {
2312 		return (plat_get_mem_sid(unum, buf, buflen, lenp));
2313 	} else {
2314 		return (ENOTSUP);
2315 	}
2316 }
2317 
2318 /* ARGSUSED */
2319 int
2320 cpu_get_mem_addr(char *unum, char *sid, uint64_t offset, uint64_t *addrp)
2321 {
2322 	if (&plat_get_mem_addr) {
2323 		return (plat_get_mem_addr(unum, sid, offset, addrp));
2324 	} else {
2325 		return (ENOTSUP);
2326 	}
2327 }
2328 
2329 /* ARGSUSED */
2330 int
2331 cpu_get_mem_offset(uint64_t flt_addr, uint64_t *offp)
2332 {
2333 	if (&plat_get_mem_offset) {
2334 		return (plat_get_mem_offset(flt_addr, offp));
2335 	} else {
2336 		return (ENOTSUP);
2337 	}
2338 }
2339 
2340 /*ARGSUSED*/
2341 void
2342 itlb_rd_entry(uint_t entry, tte_t *tte, uint64_t *va_tag)
2343 { ASSERT(0); }
2344 
2345 /*ARGSUSED*/
2346 void
2347 dtlb_rd_entry(uint_t entry, tte_t *tte, uint64_t *va_tag)
2348 { ASSERT(0); }
2349 
2350 /*ARGSUSED*/
2351 void
2352 read_ecc_data(struct async_flt *aflt, short verbose, short ce_err)
2353 { ASSERT(0); }
2354 
2355 /*ARGSUSED*/
2356 int
2357 ce_scrub_xdiag_recirc(struct async_flt *aflt, errorq_t *eqp,
2358     errorq_elem_t *eqep, size_t afltoffset)
2359 {
2360 	ASSERT(0);
2361 	return (0);
2362 }
2363 
2364 /*ARGSUSED*/
2365 char *
2366 flt_to_error_type(struct async_flt *aflt)
2367 {
2368 	ASSERT(0);
2369 	return (NULL);
2370 }
2371 
2372 #define	PROM_SPARC64VII_MODE_PROPNAME	"SPARC64-VII-mode"
2373 
2374 /*
2375  * Check for existence of OPL OBP property that indicates
2376  * SPARC64-VII support. By default, only enable Jupiter
2377  * features if the property is present.   It will be
2378  * present in all-Jupiter domains by OBP if the domain has
2379  * been selected by the user on the system controller to
2380  * run in Jupiter mode.  Basically, this OBP property must
2381  * be present to turn on the cpu_alljupiter flag.
2382  */
2383 static int
2384 prom_SPARC64VII_support_enabled(void)
2385 {
2386 	int val;
2387 
2388 	return ((prom_getprop(prom_rootnode(), PROM_SPARC64VII_MODE_PROPNAME,
2389 	    (caddr_t)&val) == 0) ? 1 : 0);
2390 }
2391 
2392 #define	PROM_KCTX_PRESERVED_PROPNAME	"context0-page-size-preserved"
2393 
2394 /*
2395  * Check for existence of OPL OBP property that indicates support for
2396  * preserving Solaris kernel page sizes when entering OBP.  We need to
2397  * check the prom tree since the ddi tree is not yet built when the
2398  * platform startup sequence is called.
2399  */
2400 static int
2401 plat_prom_preserve_kctx_is_supported(void)
2402 {
2403 	pnode_t		pnode;
2404 	int		val;
2405 
2406 	/*
2407 	 * Check for existence of context0-page-size-preserved property
2408 	 * in virtual-memory prom node.
2409 	 */
2410 	pnode = (pnode_t)prom_getphandle(prom_mmu_ihandle());
2411 	return ((prom_getprop(pnode, PROM_KCTX_PRESERVED_PROPNAME,
2412 	    (caddr_t)&val) == 0) ? 1 : 0);
2413 }
2414