1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* Copyright (c) 1990, 1991 UNIX System Laboratories, Inc. */ 23 /* Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990 AT&T */ 24 /* All Rights Reserved */ 25 26 /* 27 * Copyright 2004 Sun Microsystems, Inc. All rights reserved. 28 * Use is subject to license terms. 29 */ 30 31 #ifndef _SYS_SUDEV_H 32 #define _SYS_SUDEV_H 33 34 #pragma ident "%Z%%M% %I% %E% SMI" 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 #include <sys/tty.h> 41 #include <sys/ksynch.h> 42 #include <sys/dditypes.h> 43 #include <sys/types.h> 44 #include <sys/kstat.h> 45 46 /* 47 * Definitions for INS8250 / 16550 chips 48 */ 49 50 /* defined as offsets from the data register */ 51 #define DAT 0 /* receive/transmit data */ 52 #define ICR 1 /* interrupt control register */ 53 #define ISR 2 /* interrupt status register */ 54 #define LCR 3 /* line control register */ 55 #define MCR 4 /* modem control register */ 56 #define LSR 5 /* line status register */ 57 #define MSR 6 /* modem status register */ 58 #define DLL 0 /* divisor latch (lsb) */ 59 #define DLH 1 /* divisor latch (msb) */ 60 #define FIFOR ISR /* FIFO register for 16550 */ 61 #define OUTB(offset, value) ddi_put8(asy->asy_handle, \ 62 asy->asy_ioaddr+offset, value) 63 #define INB(offset) ddi_get8(asy->asy_handle, asy->asy_ioaddr+offset) 64 65 /* 66 * INTEL 8210-A/B & 16450/16550 Registers Structure. 67 */ 68 69 /* Line Control Register */ 70 #define WLS0 0x01 /* word length select bit 0 */ 71 #define WLS1 0x02 /* word length select bit 2 */ 72 #define STB 0x04 /* number of stop bits */ 73 #define PEN 0x08 /* parity enable */ 74 #define EPS 0x10 /* even parity select */ 75 #define SETBREAK 0x40 /* break key */ 76 #define DLAB 0x80 /* divisor latch access bit */ 77 #define RXLEN 0x03 /* # of data bits per received/xmitted char */ 78 #define STOP1 0x00 79 #define STOP2 0x04 80 #define PAREN 0x08 81 #define PAREVN 0x10 82 #define PARMARK 0x20 83 #define SNDBRK 0x40 84 85 86 #define BITS5 0x00 /* 5 bits per char */ 87 #define BITS6 0x01 /* 6 bits per char */ 88 #define BITS7 0x02 /* 7 bits per char */ 89 #define BITS8 0x03 /* 8 bits per char */ 90 91 /* baud rate definitions */ 92 #define ASY110 1047 /* 110 baud rate for serial console */ 93 #define ASY150 768 /* 150 baud rate for serial console */ 94 #define ASY300 384 /* 300 baud rate for serial console */ 95 #define ASY600 192 /* 600 baud rate for serial console */ 96 #define ASY1200 96 /* 1200 baud rate for serial console */ 97 #define ASY2400 48 /* 2400 baud rate for serial console */ 98 #define ASY4800 24 /* 4800 baud rate for serial console */ 99 #define ASY9600 12 /* 9600 baud rate for serial console */ 100 101 /* Line Status Register */ 102 #define RCA 0x01 /* data ready */ 103 #define OVRRUN 0x02 /* overrun error */ 104 #define PARERR 0x04 /* parity error */ 105 #define FRMERR 0x08 /* framing error */ 106 #define BRKDET 0x10 /* a break has arrived */ 107 #define XHRE 0x20 /* tx hold reg is now empty */ 108 #define XSRE 0x40 /* tx shift reg is now empty */ 109 #define RFBE 0x80 /* rx FIFO Buffer error */ 110 111 /* Interrupt Id Regisger */ 112 #define MSTATUS 0x00 /* modem status changed */ 113 #define NOINTERRUPT 0x01 /* no interrupt pending */ 114 #define TxRDY 0x02 /* Transmitter Holding Register Empty */ 115 #define RxRDY 0x04 /* Receiver Data Available */ 116 #define FFTMOUT 0x0c /* FIFO timeout - 16550AF */ 117 #define RSTATUS 0x06 /* Receiver Line Status */ 118 119 /* Interrupt Enable Register */ 120 #define RIEN 0x01 /* Received Data Ready */ 121 #define TIEN 0x02 /* Tx Hold Register Empty */ 122 #define SIEN 0x04 /* Receiver Line Status */ 123 #define MIEN 0x08 /* Modem Status */ 124 125 /* Modem Control Register */ 126 #define DTR 0x01 /* Data Terminal Ready */ 127 #define RTS 0x02 /* Request To Send */ 128 #define OUT1 0x04 /* Aux output - not used */ 129 #define OUT2 0x08 /* dis/enable int per INO on ALI1535D+ */ 130 #define ASY_LOOP 0x10 /* loopback for diagnostics */ 131 132 /* Modem Status Register */ 133 #define DCTS 0x01 /* Delta Clear To Send */ 134 #define DDSR 0x02 /* Delta Data Set Ready */ 135 #define DRI 0x04 /* Trail Edge Ring Indicator */ 136 #define DDCD 0x08 /* Delta Data Carrier Detect */ 137 #define CTS 0x10 /* Clear To Send */ 138 #define DSR 0x20 /* Data Set Ready */ 139 #define RI 0x40 /* Ring Indicator */ 140 #define DCD 0x80 /* Data Carrier Detect */ 141 142 #define DELTAS(x) ((x)&(DCTS|DDSR|DRI|DDCD)) 143 #define STATES(x) ((x)(CTS|DSR|RI|DCD)) 144 145 /* flags for FCR (FIFO Control register) */ 146 #define FIFO_OFF 0x00 /* fifo disabled */ 147 #define FIFO_ON 0x01 /* fifo enabled */ 148 #define FIFOEN 0x8f /* fifo enabled, w/ 8 byte trigger */ 149 #define FIFORCLR 0x8b /* Clear receiver FIFO only */ 150 151 #define FIFORXFLSH 0x02 /* flush receiver FIFO */ 152 #define FIFOTXFLSH 0x04 /* flush transmitter FIFO */ 153 #define FIFODMA 0x08 /* DMA mode 1 */ 154 #define FIFO_TRIG_1 0x00 /* 1 byte trigger level */ 155 #define FIFO_TRIG_4 0x40 /* 4 byte trigger level */ 156 #define FIFO_TRIG_8 0x80 /* 8 byte trigger level */ 157 #define FIFO_TRIG_14 0xC0 /* 14 byte trigger level */ 158 159 /* 160 * Defines for ioctl calls (VP/ix) 161 */ 162 163 #define AIOC ('A'<<8) 164 #define AIOCINTTYPE (AIOC|60) /* set interrupt type */ 165 #define AIOCDOSMODE (AIOC|61) /* set DOS mode */ 166 #define AIOCNONDOSMODE (AIOC|62) /* reset DOS mode */ 167 #define AIOCSERIALOUT (AIOC|63) /* serial device data write */ 168 #define AIOCSERIALIN (AIOC|64) /* serial device data read */ 169 #define AIOCSETSS (AIOC|65) /* set start/stop chars */ 170 #define AIOCINFO (AIOC|66) /* tell usr what device we are */ 171 172 /* Ioctl alternate names used by VP/ix */ 173 #define VPC_SERIAL_DOS AIOCDOSMODE 174 #define VPC_SERIAL_NONDOS AIOCNONDOSMODE 175 #define VPC_SERIAL_INFO AIOCINFO 176 #define VPC_SERIAL_OUT AIOCSERIALOUT 177 #define VPC_SERIAL_IN AIOCSERIALIN 178 179 /* Serial in/out requests */ 180 #define SO_DIVLLSB 1 181 #define SO_DIVLMSB 2 182 #define SO_LCR 3 183 #define SO_MCR 4 184 #define SI_MSR 1 185 #define SIO_MASK(elem) (1<<((elem)-1)) 186 187 #define OVERRUN 040000 188 #define FRERROR 020000 189 #define PERROR 010000 190 #define S_ERRORS (PERROR|OVERRUN|FRERROR) 191 192 /* 193 * Ring buffer and async line management definitions. 194 */ 195 #define RINGBITS 16 /* # of bits in ring ptrs */ 196 #define RINGSIZE (1<<RINGBITS) /* size of ring */ 197 #define RINGMASK (RINGSIZE-1) 198 #define RINGFRAC 12 /* fraction of ring to force flush */ 199 200 #define RING_INIT(ap) ((ap)->async_rput = (ap)->async_rget = 0) 201 #define RING_CNT(ap) (((ap)->async_rput - (ap)->async_rget) & RINGMASK) 202 #define RING_FRAC(ap) ((int)RING_CNT(ap) >= (int)(RINGSIZE/RINGFRAC)) 203 #define RING_POK(ap, n) ((int)RING_CNT(ap) < (int)(RINGSIZE-(n))) 204 #define RING_PUT(ap, c) \ 205 ((ap)->async_ring[(ap)->async_rput++ & RINGMASK] = (uchar_t)(c)) 206 #define RING_UNPUT(ap) ((ap)->async_rput--) 207 #define RING_GOK(ap, n) ((int)RING_CNT(ap) >= (int)(n)) 208 #define RING_GET(ap) ((ap)->async_ring[(ap)->async_rget++ & RINGMASK]) 209 #define RING_EAT(ap, n) ((ap)->async_rget += (n)) 210 #define RING_MARK(ap, c, s) \ 211 ((ap)->async_ring[(ap)->async_rput++ & RINGMASK] = ((uchar_t)(c)|(s))) 212 #define RING_UNMARK(ap) \ 213 ((ap)->async_ring[((ap)->async_rget) & RINGMASK] &= ~S_ERRORS) 214 #define RING_ERR(ap, c) \ 215 ((ap)->async_ring[((ap)->async_rget) & RINGMASK] & (c)) 216 217 /* 218 * Serial kstats structure and macro to increment an individual kstat 219 */ 220 struct serial_kstats { 221 kstat_named_t ringover; /* ring buffer overflow */ 222 kstat_named_t siloover; /* silo overflow */ 223 }; 224 225 #define INC64_KSTAT(asy, stat) (asy)->kstats.stat.value.ui64++; 226 227 /* 228 * Hardware channel common data. One structure per port. 229 * Each of the fields in this structure is required to be protected by a 230 * mutex lock at the highest priority at which it can be altered. 231 * The asy_flags, and asy_next fields can be altered by interrupt 232 * handling code that must be protected by the mutex whose handle is 233 * stored in asy_excl_hi. All others can be protected by the asy_excl 234 * mutex, which is lower priority and adaptive. 235 */ 236 struct asycom { 237 int asy_flags; /* random flags */ 238 /* protected by asy_excl_hi lock */ 239 uint_t asy_hwtype; /* HW type: ASY82510, etc. */ 240 uint_t asy_use_fifo; /* HW FIFO use it or not ?? */ 241 uint_t asy_fifo_buf; /* With FIFO = 16, otherwise = 1 */ 242 uchar_t *asy_ioaddr; /* i/o address of ASY port */ 243 uint_t asy_vect; /* IRQ number */ 244 boolean_t suspended; /* TRUE if driver suspended */ 245 caddr_t asy_priv; /* protocol private data */ 246 dev_info_t *asy_dip; /* dev_info */ 247 long asy_unit; /* which port */ 248 ddi_iblock_cookie_t asy_iblock; 249 kmutex_t *asy_excl; /* asy adaptive mutex */ 250 kmutex_t *asy_excl_hi; /* asy spinlock mutex */ 251 ddi_acc_handle_t asy_handle; /* ddi_get/put handle */ 252 ushort_t asy_rsc_console; /* RSC console port */ 253 ushort_t asy_rsc_control; /* RSC control port */ 254 ushort_t asy_lom_console; /* LOM console port */ 255 uint_t asy_xmit_count; /* Count the no of xmits in one intr */ 256 uint_t asy_out_of_band_xmit; /* Out of band xmission */ 257 uint_t asy_rx_count; /* No. of bytes rx'eved in one intr */ 258 uchar_t asy_device_type; /* Currently used for this device */ 259 uchar_t asy_trig_level; /* Receive FIFO trig level */ 260 kmutex_t *asy_soft_lock; /* soft lock for gaurding softpend. */ 261 int asysoftpend; /* Flag indicating soft int pending. */ 262 ddi_softintr_t asy_softintr_id; 263 ddi_iblock_cookie_t asy_soft_iblock; 264 int asy_baud_divisor_factor; /* for different chips */ 265 int asy_ocflags; /* old cflags used in asy_program() */ 266 uint_t asy_cached_msr; /* a cache for the MSR register */ 267 int asy_speed_cap; /* maximum baud rate */ 268 kstat_t *sukstat; /* ptr to serial kstats */ 269 struct serial_kstats kstats; /* serial kstats structure */ 270 boolean_t inperim; /* in streams q perimeter */ 271 }; 272 273 /* 274 * Asychronous protocol private data structure for ASY. 275 * Each of the fields in the structure is required to be protected by 276 * the lower priority lock except the fields that are set only at 277 * base level but cleared (with out lock) at interrupt level. 278 */ 279 struct asyncline { 280 int async_flags; /* random flags */ 281 kcondvar_t async_flags_cv; /* condition variable for flags */ 282 dev_t async_dev; /* device major/minor numbers */ 283 mblk_t *async_xmitblk; /* transmit: active msg block */ 284 struct asycom *async_common; /* device common data */ 285 tty_common_t async_ttycommon; /* tty driver common data */ 286 bufcall_id_t async_wbufcid; /* id for pending write-side bufcall */ 287 timeout_id_t async_polltid; /* softint poll timeout id */ 288 289 /* 290 * The following fields are protected by the asy_excl_hi lock. 291 * Some, such as async_flowc, are set only at the base level and 292 * cleared (without the lock) only by the interrupt level. 293 */ 294 uchar_t *async_optr; /* output pointer */ 295 int async_ocnt; /* output count */ 296 uint_t async_rput; /* producing pointer for input */ 297 uint_t async_rget; /* consuming pointer for input */ 298 uchar_t async_flowc; /* flow control char to send */ 299 300 /* 301 * Each character stuffed into the ring has two bytes associated 302 * with it. The first byte is used to indicate special conditions 303 * and the second byte is the actual data. The ring buffer 304 * needs to be defined as ushort_t to accomodate this. 305 */ 306 ushort_t async_ring[RINGSIZE]; 307 308 short async_break; /* break count */ 309 310 union { 311 struct { 312 uchar_t _hw; /* overrun (hw) */ 313 uchar_t _sw; /* overrun (sw) */ 314 } _a; 315 ushort_t uover_overrun; 316 } async_uover; 317 #define async_overrun async_uover._a.uover_overrun 318 #define async_hw_overrun async_uover._a._hw 319 #define async_sw_overrun async_uover._a._sw 320 short async_ext; /* modem status change count */ 321 short async_work; /* work to do flag */ 322 uchar_t async_queue_full; /* Streams Queue Full */ 323 uchar_t async_ringbuf_overflow; /* when ring buffer overflows */ 324 timeout_id_t async_timer; /* close drain progress timer */ 325 }; 326 327 /* definitions for async_flags field */ 328 #define ASYNC_EXCL_OPEN 0x10000000 /* exclusive open */ 329 #define ASYNC_WOPEN 0x00000001 /* waiting for open to complete */ 330 #define ASYNC_ISOPEN 0x00000002 /* open is complete */ 331 #define ASYNC_OUT 0x00000004 /* line being used for dialout */ 332 #define ASYNC_CARR_ON 0x00000008 /* carrier on last time we looked */ 333 #define ASYNC_STOPPED 0x00000010 /* output is stopped */ 334 #define ASYNC_DELAY 0x00000020 /* waiting for delay to finish */ 335 #define ASYNC_BREAK 0x00000040 /* waiting for break to finish */ 336 #define ASYNC_BUSY 0x00000080 /* waiting for transmission to finish */ 337 #define ASYNC_DRAINING 0x00000100 /* waiting for output to drain */ 338 #define ASYNC_SERVICEIMM 0x00000200 /* queue soft interrupt as soon as */ 339 #define ASYNC_HW_IN_FLOW 0x00000400 /* input flow control in effect */ 340 #define ASYNC_HW_OUT_FLW 0x00000800 /* output flow control in effect */ 341 #define ASYNC_PROGRESS 0x00001000 /* made progress on output effort */ 342 #define ASYNC_CLOSING 0x00002000 /* closing the stream */ 343 344 /* asy_hwtype definitions */ 345 #define ASY82510 0x1 346 #define ASY16550AF 0x2 347 #define ASY8250 0x3 /* 8250 or 16450 or 16550 */ 348 349 /* definitions for asy_flags field */ 350 #define ASY_NEEDSOFT 0x00000001 351 #define ASY_DOINGSOFT 0x00000002 352 #define ASY_PPS 0x00000004 353 #define ASY_PPS_EDGE 0x00000008 354 #define ASY_IGNORE_CD 0x00000040 355 356 /* 357 * Different devices this driver supports and what it is used to drive 358 * currently 359 */ 360 #define ASY_KEYBOARD 0x01 361 #define ASY_MOUSE 0x02 362 #define ASY_SERIAL 0x03 363 364 /* 365 * RSC_DEVICE defines the bit in the minor device number that specifies 366 * the tty line is to be used for console/controlling a RSC device. 367 */ 368 #define RSC_DEVICE (1 << (NBITSMINOR32 - 4)) 369 370 /* 371 * OUTLINE defines the high-order flag bit in the minor device number that 372 * controls use of a tty line for dialin and dialout simultaneously. 373 */ 374 #define OUTLINE (1 << (NBITSMINOR32 - 1)) 375 #define UNIT(x) (getminor(x) & ~(OUTLINE | RSC_DEVICE)) 376 377 /* suggested number of soft state instances */ 378 #define SU_INITIAL_SOFT_ITEMS 0x02 379 380 /* 381 * ASYSETSOFT macro to pend a soft interrupt if one isn't already pending. 382 */ 383 384 #define ASYSETSOFT(asy) { \ 385 if (mutex_tryenter(asy->asy_soft_lock)) { \ 386 asy->asy_flags |= ASY_NEEDSOFT; \ 387 if (!asy->asysoftpend) { \ 388 asy->asysoftpend = 1; \ 389 mutex_exit(asy->asy_soft_lock);\ 390 ddi_trigger_softintr(asy->asy_softintr_id);\ 391 } else \ 392 mutex_exit(asy->asy_soft_lock);\ 393 } \ 394 } 395 396 #ifdef __cplusplus 397 } 398 #endif 399 400 #endif /* _SYS_SUDEV_H */ 401